Basic Turf Install using Xtreme Seam Binder.

1. Mario Rodriguez
Regional Sales Rep.
Extreme Glue and Supplies
Phone 714-614-6563
Fax (909) 869-5722
XGS Extreme Glue and Supplies

2. XGS Green Seam Binder
Basic Install Demo

3. Get all your supplies ready.

4. Cut your seam tape to size.

5. Yes that’s right pour your glue to about 4 Inches wide for an 8in.
Piece of seam tape. One gallon will cover around 108 sq. feet.

6. The glue can spread a little on its own, let it and get ready for
spreading.

7. A spatula works great but for wider tape I advise that you use a
trowel to spread the glue to about 1/8 in. thickness across the tape.

9. Glue will set in about 5-10 minutes, wait for glue to become tacky before laying
down the turf. You can speed the process up by spraying a little water on the
glue to make it kick faster.

10. Make sure that you when you roll the edges into place that the turf blades do
not come in contact with the glue. If some do wipe with a wet rag to clean.

11. Work your way down, come back and repeat periodically, no need
to weigh down seams with boards.

16. Mario Rodriguez
Regional Sales Rep.
Extreme Glue and Supplies
Phone 714-614-6563
Fax (909) 869-5722
XGS Extreme Glue and Supplies