Water storage data
•
0 likes•184 views
J
J CThis document summarizes the first flush volume and storage capacity for the roofs of a two-story building. It finds that the second story roof can divert 207 gallons and store 6,647.99 gallons, while the first story roof can divert 138 gallons and store 2,147 gallons. It also provides a table showing the total water collected in gallons for different levels of precipitation.
Report
Share
Report
Share
Download to read offline
Recommended
Storage capacity
This document summarizes the first flush volume and storage capacity calculations for the roofs of a two-story building. For a 2nd story roof of 13,800 sq ft, 207 gallons were diverted in the first flush and the roof can store 6,647.99 gallons of rainwater. For a 1st story roof of 9,200 sq ft, 138 gallons were diverted in the first flush and the roof can store 2,147 gallons of rainwater for a total storage capacity across both roofs of 8,794.99 gallons.
Summary of loan and payments
This document is a loan amortization schedule for a $3,406,232.87 commercial loan taken out in 2013 at 3% annual interest over 30 years. It shows the monthly payment amount, interest paid, principal paid, and outstanding balance over the life of the loan. It also includes totals for interest paid, principal paid, and total payments over the loan term.
Summary of costs
This document provides a breakdown of costs for building an eco-plaza project totaling $3,406,232.87. It also lists the monthly expenditures of $25,002.40 for building loan, CPS bill, and SAWS bill. Finally, it estimates that with a 5% membership rate from the nearby 143873 population area and a subsidized $5 monthly membership, the eco-plaza could generate $35,968.25 in monthly income to cover costs and offer services and gym memberships at very low prices.
Gutter sizing data
This document provides calculations for sizing roof gutters for a 25-year and 10-year storm event on a roof area of 13800 square feet. It lists storm intensities and resulting runoff flows, depths, and durations. For a 25-year storm, it determines a required gutter width of 13 inches and height of 6.5 inches is needed to handle a flow of 0.8 cubic feet per second. For a 10-year storm, it finds a required width of 12 inches and height of 6 inches to handle a flow of 0.65 cubic feet per second. The final chosen gutter dimensions are 7 inches wide by 7 inches tall to accommodate the 3 downspouts on the system.
Leed consultant review
The document outlines sustainable site (SS) credits and prerequisites from LEED for achieving points related to construction activity pollution prevention, site selection, development density and connectivity, brownfield redevelopment, transportation access, heat island effect reduction, stormwater design, light pollution reduction, and habitat protection or restoration. It includes tasks required to complete each credit along with the number of points attainable and governing provisions.
Irrigation savings
This document summarizes irrigation water usage and costs under different weather conditions. It shows the irrigation demand, water collected, and monthly water bills for drought, excess rain, and normal conditions. Capturing rainfall reduces monthly bills by $443-828 depending on conditions. Over 30 years, using captured rainwater would save $682-6,856 compared to the cost of installation, with normal conditions providing the highest profit.
New Songdo City, South Korea: Bringing LEED to a Mega Project in a New Market...
Songdo International Business Development (IBD), New Songdo International City LLC, Republic of Korea is a $30 billion, private 1554-acre (628-hectare) master-planned site with 350 commercial, institutional, retail, and residential buildings. The client introduced LEED to Korea and Parsons Brinckerhoff’s task was to set the foundation for embedding LEED into the project on-site. Songdo IBD holds the first LEED-registered projects in Korea, with over 70 projects, mostly city blocks, in pursuit of LEED certification and ten projects certified.
Recommended
Storage capacity
This document summarizes the first flush volume and storage capacity calculations for the roofs of a two-story building. For a 2nd story roof of 13,800 sq ft, 207 gallons were diverted in the first flush and the roof can store 6,647.99 gallons of rainwater. For a 1st story roof of 9,200 sq ft, 138 gallons were diverted in the first flush and the roof can store 2,147 gallons of rainwater for a total storage capacity across both roofs of 8,794.99 gallons.
Summary of loan and payments
This document is a loan amortization schedule for a $3,406,232.87 commercial loan taken out in 2013 at 3% annual interest over 30 years. It shows the monthly payment amount, interest paid, principal paid, and outstanding balance over the life of the loan. It also includes totals for interest paid, principal paid, and total payments over the loan term.
Summary of costs
This document provides a breakdown of costs for building an eco-plaza project totaling $3,406,232.87. It also lists the monthly expenditures of $25,002.40 for building loan, CPS bill, and SAWS bill. Finally, it estimates that with a 5% membership rate from the nearby 143873 population area and a subsidized $5 monthly membership, the eco-plaza could generate $35,968.25 in monthly income to cover costs and offer services and gym memberships at very low prices.
Gutter sizing data
This document provides calculations for sizing roof gutters for a 25-year and 10-year storm event on a roof area of 13800 square feet. It lists storm intensities and resulting runoff flows, depths, and durations. For a 25-year storm, it determines a required gutter width of 13 inches and height of 6.5 inches is needed to handle a flow of 0.8 cubic feet per second. For a 10-year storm, it finds a required width of 12 inches and height of 6 inches to handle a flow of 0.65 cubic feet per second. The final chosen gutter dimensions are 7 inches wide by 7 inches tall to accommodate the 3 downspouts on the system.
Leed consultant review
The document outlines sustainable site (SS) credits and prerequisites from LEED for achieving points related to construction activity pollution prevention, site selection, development density and connectivity, brownfield redevelopment, transportation access, heat island effect reduction, stormwater design, light pollution reduction, and habitat protection or restoration. It includes tasks required to complete each credit along with the number of points attainable and governing provisions.
Irrigation savings
This document summarizes irrigation water usage and costs under different weather conditions. It shows the irrigation demand, water collected, and monthly water bills for drought, excess rain, and normal conditions. Capturing rainfall reduces monthly bills by $443-828 depending on conditions. Over 30 years, using captured rainwater would save $682-6,856 compared to the cost of installation, with normal conditions providing the highest profit.
New Songdo City, South Korea: Bringing LEED to a Mega Project in a New Market...
Songdo International Business Development (IBD), New Songdo International City LLC, Republic of Korea is a $30 billion, private 1554-acre (628-hectare) master-planned site with 350 commercial, institutional, retail, and residential buildings. The client introduced LEED to Korea and Parsons Brinckerhoff’s task was to set the foundation for embedding LEED into the project on-site. Songdo IBD holds the first LEED-registered projects in Korea, with over 70 projects, mostly city blocks, in pursuit of LEED certification and ten projects certified.
Horario segundo bimestre
El documento presenta los horarios de las asignaturas para la jornada A, B y C del segundo bimestre en la Institución Educativa Preuniversitaria de Bello. Detalla las asignaturas que cursarán los estudiantes de cada grado los días de la semana, así como los nombres de los docentes a cargo de cada una. También incluye la información de los directores de grupo y las aulas donde se impartirán las clases.
Interior design 1/the chosen interior design for the presentation
The document describes an arrangement of furniture and equipment in a room, including a piano near the entrance, food tables next to the entrance, fixed tables, a smart board at the front of the room in a 'U' shape facing chairs, and images hung above the food tables. The described layout was intended to allow easy access to refreshments for people entering the room and to facilitate viewing of a presentation on the smart board from the seated audience area.
Trabajo de alvaro
La radiación solar influye en los organismos terrestres al proporcionar beneficios como la vitamina D y estimular el metabolismo, aunque una exposición excesiva puede ser perjudicial. Los seres vivos deben mantener un ambiente interno constante a través de la homeostasis, que es la capacidad de los organismos de adaptarse y mantener el equilibrio a pesar de los cambios ambientales, lo que les permite sobrevivir en un entorno variable.
Poas
Daniel escribió desde el volcán Poás en Costa Rica, donde estaba disfrutando de las vistas espectaculares de la montaña y sacando fotos. Mientras caminaba por el sendero en la selva cercana, vio hermosas mariposas y animales. Llegó al volcán porque su hermano le dio sus entradas para Costa Rica, aunque su madre dudaba que su hermano pudiera ir debido a que necesitaba estudiar para exámenes. Daniel regresará a casa el viernes.
Leed 2009 checklist
This document is a checklist for the LEED 2009 certification of a project called Eco-Plaza for New Construction and Major Renovations. It lists the various credits in each category (Sustainable Sites, Water Efficiency, etc.) and shows which credits the project plans to pursue. The project has earned 84 points out of a possible 110 and is pursuing Gold level certification which requires 60-79 points.
Leed 2009 checklist
This document is a LEED 2009 checklist for a new construction or major renovation project. It summarizes the categories and credits in LEED, including sustainable sites, water efficiency, energy and atmosphere, materials and resources, indoor environmental quality, innovation in design, and regional priorities. The checklist shows which credits are pursued for the project and tracks progress towards achieving LEED certification at the certified, silver, gold, or platinum level based on the total points achieved.
Loan analysis
This document provides details on a 30-year commercial loan taken out in 2013 for $3,235,102.73 at an annual interest rate of 3%. It includes a monthly payment schedule showing the breakdown of principal and interest payments over the life of the loan through 2043. Key details include the monthly payment amount, annual property taxes and insurance, and the declining loan balance over time.
Costs
The document provides a breakdown of costs for constructing an Eco-Plaza project totaling $3,396,857.87. It also lists the monthly expenditures of $24,942.56 required to pay back the building loan and utility bills. However, the Eco-Plaza is estimated to generate $35,968.25 in monthly income from a $5 subsidized membership fee for the 143873 people within a 5-mile radius, which would cover the monthly costs and make the project financially sustainable.
Schedule
This document outlines a 27 task, 299 day project schedule to construct a multi-section building. Key tasks include mobilizing on site, clearing the land, digging foundations, placing rebar, pouring concrete slabs and floors, erecting steel framing, installing doors/windows, painting, adding landscaping, and demobilizing. The schedule notes one section is a single story with a garden roof and the other is two stories with solar panels installed above.
Final pv system
This document summarizes the energy consumption and costs for a proposed solar PV system installation on a 23,000 square foot building. The building currently uses 1,474 kWh per day of energy. A proposed 87.23 kW solar array using 363 panels could generate 462 kWh per day, providing 31.4% of the building's energy needs. The total installed cost of the system would be $390,880, but with a $100,000 rebate the net cost would be $290,880. This system would save $977 per month on electricity bills and have a 21.1 year return on investment.
Pv system analysis
The document analyzes four photovoltaic system options to determine the most cost effective one for a building. It finds that Option 2, a 87.2 kW system using Canadian Solar panels, has the lowest return period at 21.1 years, lowest cost per kW, second highest monthly savings, and second highest percentage of the solar energy bill covered. For these reasons, Option 2 is selected as the best photovoltaic system.
Pv system sizing
This document discusses sizing solar panels for a building with an energy consumption of 1474.52 kWh per day. It evaluates 4 options for sizing solar panels using different panel types and wattages to meet between 30.2-42.3% of the building's energy needs. The first option uses 240W panels and would provide 444.99 kWh per day (30.2% of needs). The second uses higher powered 435W panels and would provide 624.27 kWh per day (42.3% of needs). The third and fourth options use 285W and 240W panels respectively and would each provide around 31% of the building's energy needs.
Structural costs
This document provides information on the structural components for an eco-plaza, including specifications and pricing for columns, beams, joists, rebar, and concrete. It details the section, length, weight, tonnage, and pricing for each component. The total structural cost for the eco-plaza is $314,740.65.
Foundation Analysis
The document provides details on the dimensions, reinforcement, and specifications for 31 foundations. It includes the length, width, depth and area of each foundation. It then provides detailed information on the longitudinal and shear reinforcement for foundations 10 through 14, including the bar size, number, spacing and required vs provided cross-sectional area. The foundations range in length from 60 to 233 feet. Reinforcement included #3 through #8 bars for the longitudinal reinforcement and #4 and #5 bars for shear reinforcement.
Foundation data
The document provides details on the reinforcement of 14 foundations, including the length, width, depth, area, and reinforcement schedule for each. The reinforcement schedule includes the number and size of steel bars placed in segments along the length of each foundation, as well as the required and provided steel area for each segment.
Irrigation Plan
This document is a blank page that was produced by an Autodesk educational product. The page contains no text or images, only a watermark stating it was produced by an Autodesk educational product in the top left corner, which is repeated four times across the blank page.
Irrigation demand
This document analyzes the irrigation water demand and potential savings from water capture for three different weather conditions: drought, excess rain, and normal. It calculates the yearly irrigation water demand as 552,509 gallons and models the monthly water bills and savings that could result from using captured rainwater instead of municipal water under each condition. The greatest potential savings are seen under excess rain conditions, where monthly bills could be reduced by up to $698.88 annually using captured water.
Water Collected On Roof
The document shows monthly rainfall data from 1990 to 2011 for an unspecified location. It includes the average rainfall for each month and year over the 22 year period. It then uses the average rainfall data to calculate estimated water collection amounts on a building with a green roof and standard roof surfaces under drought, excess rain, and average rainfall conditions. The calculations provide total monthly and annual water collection estimates for the different roof scenarios.
Geotech and Pavement Design Information
The geotechnical report summarizes subsurface conditions at a site located near FM78 and Lakeview. Three soil strata were identified below 1.5 feet of asphalt and crushed limestone base: [1] stiff lean clay from 0.5-1 feet; [2] stiff to very stiff clay from 1-7 feet; and [3] stiff to very stiff clay with gypsum crystals from 7-15 feet. Approximately 3 feet of clay should be removed and replaced with select fill. Shallow foundations are suitable with a minimum embedment of 2 feet below grade and allowable bearing pressure of 2,000 psf. Total settlement of 1 inch and differential settlement of 0.5-0.75 inches
More Related Content
Viewers also liked
Horario segundo bimestre
El documento presenta los horarios de las asignaturas para la jornada A, B y C del segundo bimestre en la Institución Educativa Preuniversitaria de Bello. Detalla las asignaturas que cursarán los estudiantes de cada grado los días de la semana, así como los nombres de los docentes a cargo de cada una. También incluye la información de los directores de grupo y las aulas donde se impartirán las clases.
Interior design 1/the chosen interior design for the presentation
The document describes an arrangement of furniture and equipment in a room, including a piano near the entrance, food tables next to the entrance, fixed tables, a smart board at the front of the room in a 'U' shape facing chairs, and images hung above the food tables. The described layout was intended to allow easy access to refreshments for people entering the room and to facilitate viewing of a presentation on the smart board from the seated audience area.
Trabajo de alvaro
La radiación solar influye en los organismos terrestres al proporcionar beneficios como la vitamina D y estimular el metabolismo, aunque una exposición excesiva puede ser perjudicial. Los seres vivos deben mantener un ambiente interno constante a través de la homeostasis, que es la capacidad de los organismos de adaptarse y mantener el equilibrio a pesar de los cambios ambientales, lo que les permite sobrevivir en un entorno variable.
Poas
Daniel escribió desde el volcán Poás en Costa Rica, donde estaba disfrutando de las vistas espectaculares de la montaña y sacando fotos. Mientras caminaba por el sendero en la selva cercana, vio hermosas mariposas y animales. Llegó al volcán porque su hermano le dio sus entradas para Costa Rica, aunque su madre dudaba que su hermano pudiera ir debido a que necesitaba estudiar para exámenes. Daniel regresará a casa el viernes.
Viewers also liked (7)
Interior design 1/the chosen interior design for the presentation
Interior design 1/the chosen interior design for the presentation
More from J C
Leed 2009 checklist
This document is a checklist for the LEED 2009 certification of a project called Eco-Plaza for New Construction and Major Renovations. It lists the various credits in each category (Sustainable Sites, Water Efficiency, etc.) and shows which credits the project plans to pursue. The project has earned 84 points out of a possible 110 and is pursuing Gold level certification which requires 60-79 points.
Leed 2009 checklist
This document is a LEED 2009 checklist for a new construction or major renovation project. It summarizes the categories and credits in LEED, including sustainable sites, water efficiency, energy and atmosphere, materials and resources, indoor environmental quality, innovation in design, and regional priorities. The checklist shows which credits are pursued for the project and tracks progress towards achieving LEED certification at the certified, silver, gold, or platinum level based on the total points achieved.
Loan analysis
This document provides details on a 30-year commercial loan taken out in 2013 for $3,235,102.73 at an annual interest rate of 3%. It includes a monthly payment schedule showing the breakdown of principal and interest payments over the life of the loan through 2043. Key details include the monthly payment amount, annual property taxes and insurance, and the declining loan balance over time.
Costs
The document provides a breakdown of costs for constructing an Eco-Plaza project totaling $3,396,857.87. It also lists the monthly expenditures of $24,942.56 required to pay back the building loan and utility bills. However, the Eco-Plaza is estimated to generate $35,968.25 in monthly income from a $5 subsidized membership fee for the 143873 people within a 5-mile radius, which would cover the monthly costs and make the project financially sustainable.
Schedule
This document outlines a 27 task, 299 day project schedule to construct a multi-section building. Key tasks include mobilizing on site, clearing the land, digging foundations, placing rebar, pouring concrete slabs and floors, erecting steel framing, installing doors/windows, painting, adding landscaping, and demobilizing. The schedule notes one section is a single story with a garden roof and the other is two stories with solar panels installed above.
Final pv system
This document summarizes the energy consumption and costs for a proposed solar PV system installation on a 23,000 square foot building. The building currently uses 1,474 kWh per day of energy. A proposed 87.23 kW solar array using 363 panels could generate 462 kWh per day, providing 31.4% of the building's energy needs. The total installed cost of the system would be $390,880, but with a $100,000 rebate the net cost would be $290,880. This system would save $977 per month on electricity bills and have a 21.1 year return on investment.
Pv system analysis
The document analyzes four photovoltaic system options to determine the most cost effective one for a building. It finds that Option 2, a 87.2 kW system using Canadian Solar panels, has the lowest return period at 21.1 years, lowest cost per kW, second highest monthly savings, and second highest percentage of the solar energy bill covered. For these reasons, Option 2 is selected as the best photovoltaic system.
Pv system sizing
This document discusses sizing solar panels for a building with an energy consumption of 1474.52 kWh per day. It evaluates 4 options for sizing solar panels using different panel types and wattages to meet between 30.2-42.3% of the building's energy needs. The first option uses 240W panels and would provide 444.99 kWh per day (30.2% of needs). The second uses higher powered 435W panels and would provide 624.27 kWh per day (42.3% of needs). The third and fourth options use 285W and 240W panels respectively and would each provide around 31% of the building's energy needs.
Structural costs
This document provides information on the structural components for an eco-plaza, including specifications and pricing for columns, beams, joists, rebar, and concrete. It details the section, length, weight, tonnage, and pricing for each component. The total structural cost for the eco-plaza is $314,740.65.
Foundation Analysis
The document provides details on the dimensions, reinforcement, and specifications for 31 foundations. It includes the length, width, depth and area of each foundation. It then provides detailed information on the longitudinal and shear reinforcement for foundations 10 through 14, including the bar size, number, spacing and required vs provided cross-sectional area. The foundations range in length from 60 to 233 feet. Reinforcement included #3 through #8 bars for the longitudinal reinforcement and #4 and #5 bars for shear reinforcement.
Foundation data
The document provides details on the reinforcement of 14 foundations, including the length, width, depth, area, and reinforcement schedule for each. The reinforcement schedule includes the number and size of steel bars placed in segments along the length of each foundation, as well as the required and provided steel area for each segment.
Irrigation Plan
This document is a blank page that was produced by an Autodesk educational product. The page contains no text or images, only a watermark stating it was produced by an Autodesk educational product in the top left corner, which is repeated four times across the blank page.
Irrigation demand
This document analyzes the irrigation water demand and potential savings from water capture for three different weather conditions: drought, excess rain, and normal. It calculates the yearly irrigation water demand as 552,509 gallons and models the monthly water bills and savings that could result from using captured rainwater instead of municipal water under each condition. The greatest potential savings are seen under excess rain conditions, where monthly bills could be reduced by up to $698.88 annually using captured water.
Water Collected On Roof
The document shows monthly rainfall data from 1990 to 2011 for an unspecified location. It includes the average rainfall for each month and year over the 22 year period. It then uses the average rainfall data to calculate estimated water collection amounts on a building with a green roof and standard roof surfaces under drought, excess rain, and average rainfall conditions. The calculations provide total monthly and annual water collection estimates for the different roof scenarios.
Geotech and Pavement Design Information
The geotechnical report summarizes subsurface conditions at a site located near FM78 and Lakeview. Three soil strata were identified below 1.5 feet of asphalt and crushed limestone base: [1] stiff lean clay from 0.5-1 feet; [2] stiff to very stiff clay from 1-7 feet; and [3] stiff to very stiff clay with gypsum crystals from 7-15 feet. Approximately 3 feet of clay should be removed and replaced with select fill. Shallow foundations are suitable with a minimum embedment of 2 feet below grade and allowable bearing pressure of 2,000 psf. Total settlement of 1 inch and differential settlement of 0.5-0.75 inches
Existing Utilities
This document shows a map of utility infrastructure including manholes, sewer mains, water mains, and two eco-centers. The map uses symbols like circles and lines to represent the different utility types and includes numbers that likely correspond to specific infrastructure elements.
Leed 2009 new constru chk list
This document is a LEED 2009 checklist for a new construction or major renovation project. It summarizes the categories, credits, and possible points in the LEED rating system. The categories include sustainable sites, water efficiency, energy and atmosphere, materials and resources, indoor environmental quality, innovation in design, and regional priorities. The project aims to achieve a certified, silver, gold, or platinum level of certification under the LEED 2009 standard for new construction and major renovations.
More from J C (17)
Recently uploaded
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Recently uploaded (20)
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Water storage data
- 1. First Flush Volume 2nd Story Roof 1st Story Roof Area 13,800.00 ft^2 Area 9,200.00 ft^2 Gallons Gallons Diverted 207.00 gals Diverted 138.00 gals *Note for every 1000 ft^2 of area 15 galllons needs to be diverted. Storage Capacity 2nd Story Roof 1st Story Roof Depth of Depth of Rain 0.083 ft Rain 0.083 ft Area 13,800.00 ft^2 Area 9,200.00 ft^2 Volume 916.32 ft^3 Volume 305.44 ft^3 Volume 6,647.99 gallons Volume 2,147.00 gallons Total Volume 8,794.99 gallons Total Volume 1,175.64 ft^3 *In determining the volume coefficient of .8 was used *1st story roof coefficient of .5 was used in calculating the volume due to 50% of water to be captured by the garden roof. Precipation Collected (in) Water (gal) 0.10 569.00 0.20 1,494.00 0.25 1,945.50 0.30 2,408.00 0.40 3,289.00 0.50 4,280.00 0.60 5,161.00 0.70 6,075.00 0.75 6,537.52 0.80 7,033.00 0.90 7,914.00 1.00 8,795.00 * Precipitation values are for a total depth for a storm event.