Increase Oil Production 25% Using Ionized Water Injection
1. Water Ionizer increasing revenue from existing production Ionized water used for well injection Increases oil production Example: Switching to ionized water has increased well production by 25% - sustained due to effects of water thinning, metals removal, formation cleaning i.e. breaks up skin damage, swollen clays, and damage from acid and gel fracs. Removes fine particles from the reservoir WET/EIG
2.
3.
4. Water Ionizer results Company: New Tech Engineering President: Regan D. Wood Date: 21st December 2001 Location: Bixby, Oklahoma Purpose: Ionize produced salt water in Highbaugh field Results: 120 bbls of salt water and 280 bbls of untreated salt water were simultaneously pumped through the Ion izer. The resulting mixture was left overnight and in the morning revealed 2 inches of oil in the tank which were not apparent before treatment. The technology is able to break oil in water emulsions to reveal two immiscible liquids (oil and water). Occupation: Consulting Geophysicist Name: Edwin K. Hiserodt Date: 17th March 2004 Purpose: Characterize details of chemical/physical changes in water caused by treatment with the Ionizer Results: Experiment conducted using Tulsa city water pumped from a 5-gallon plastic container. Low pressure (20 psi) non-stop, 60 second run; reduced resistivity by 10% high pressure (98 psi) non-stop, 60 second run; reduced resistivity by 17% Using the VICR #micro 6, at high pressure reduced resistivity by 57.5% Experiment conducted with salt water 7,000ppm using the Ionizer #micro 6 at low pressure Precipitous drop in resistivity of 96%, and a 33% drop in pH for the first few minutes, before rising to original level. Conclusions: Using Ionizer leads to greater destruction of bacteria/alga and also reduces the number of molecules in water clusters, which will greatly reduce pressure required to drive contaminated water. WET/EIG
5.
6. Water Ionizer SUMMARY Up to 25% increased production – sustained Up to 85% decrease in injection pressure Reduces oil in produced water <1% remaining Elimination or huge reduction in damaging metals increasing revenue from existing production WET/EIG