The document provides instructions for removing and installing an engine. It describes disconnecting hoses, electrical connections, removing mounting hardware and lifting the engine out. When installing, it describes connecting all hoses and electrical connections, installing mounting hardware, and filling fluids before starting the engine to check for leaks.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...
Volvo EC360C L EC360CL Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/12/23
Profile:
EXC, EC360C L [GB]
Engine, description
The D12D is the model number of the Volvo 12 liter engine.
The engine is a 6-cylinder, 4-stroke, direct injection diesel with a 12 liter cylinder volume, turbocharger, charge air
cooler and electronic controlled fuel injection, EMS (Engine Management System).
The serial number of the engine is to be found stamped in the cylinder block on the rear left side.
The cylinder head is of cast iron and manufactured in one piece which is necessary in order to provide stable
bearings for the overhead camshaft.
The cylinder liner is sealed against the coolant casing with rubber rings.
The D12D has a four-valve system and overhead camshaft.
The engine timing gear transmission is located at the front of the engine on a 10 mm thick steel plate bolted to the
cylinder block.
The crankshaft is drop forged and has induction hardened bearing surfaces and fillets.
The engine is force fed lubricated by an oil pump which is gear driven from the engine crankshaft via an
intermediate gear
The fuel system for D12D has electronic control with unit injectors one for each cylinder and which operate at a very
high pressure.
The fuel feed pump is a gear driven type and is driven from the engine timing gear with the same gear.
Figure 1
Engine, structure
2. 1 Hand pump 9 Air conditioner compressor 17 Fuel feed pump
2 Water separator 10 Lifting bracket 18 Oil pan
3 Fuel filter 11 Coolant temperature sensor 19 Engine oil drain valve
4 From radiator 12 Flywheel housing 20 Fan belt
5 Engine oil filler 13 Speed sensor 21 Crankshaft pulley
6 From charge air cooler 14 Starter motor 22 Fan drive and pulley
7 Alternator belt 15 Breather 23 Belt tensioner
8 Alternator 16 E-ECU 24 Engine oil filter
3. Service Information
Document Title: Function Group: Information Type: Date:
Engine, identification 200 Service Information 2014/12/23
Profile:
EXC, EC360C L [GB]
Engine, identification
Identification plate
The engine model, serial number and performance data are stamped on an identification plate which is attached on the
cylinder head cover. The engine model designation and serial number must be indicated when ordering spare parts.
Figure 1
Engine identification plate location
4. Service Information
Document Title: Function Group: Information Type: Date:
Engine, removing 210 Service Information 2014/12/23
Profile:
EXC, EC360C L [GB]
Engine, removing
Op nbr 210-070
9998257 Lifting tool
9998547 Lifting device
WARNING
Risk of burns - stop the diesel engine and allow it to cool down before starting any work.
WARNING
Removal of residual pressure from the circuit must be done prior to any maintenance.
NOTE!
Cable ties and clamps that secure hoses and electrical wiring must be removed and then replaced when installing.
1. Place the machine in the service position B. See091 Service positions
2. Turn off the battery disconnect switch.
3. Loosen two screws and connect hose (1). and then drain the hydraulic oil into a suitable collection container.
Figure 1
Hydraulic oil tank, drain
4. Drain the coolant in a collection container.
5. Remove under cover (1).
5. Figure 2
Removal, under cover
6. Remove silencer hood (1).
Figure 3
Removal, silencer hood
7. Remove screws (1) and open radiator hood (2).
Figure 4
Opening, radiator hood
8. Remove the rear cover of the engine hood.
6. Figure 5
Removal, cover
9. Open the engine hood and remove the cowl mounting screws.
10. Remove cowl (1) using a lifting device.
11. Disconnect wire harness connector (2), hoses (3), and remove expansion tank (1) with the bracket.
Figure 6
Removal, expansion tank
12. Remove foot step (1).
Figure 7
Removal, step
13. Disconnect radiator hose (2) and upper charge air cooler hose (1).
7. Figure 8
Removal, radiator and charge air cooler hose
14. Disconnect hose (1) of engine oil remote filter bypass.
Figure 9
Disconnect, hose
15. Remove radiator fan guard (1).
Figure 10
Removal, radiator fan guard
16. Remove radiator fan (1).
8. Figure 11
Removal, radiator fan
17. Disconnect turbocharger inlet hose (1).
Figure 12
Disconnect, hose
18. Disconnect cab heater hoses on the engine block and coolant pump.
Figure 13
Disconnect, hose
1. Cab heater hose on engine block
19. Open the machine right side cover.
20. Remove the main pump. See 913 Hydraulic pump, replacing
21. Disconnect the fuel line hoses (4 pcs).
NOTE!
9. Ports must be plugged after disassembling hoses.
Figure 14
Disconnect, hose
22. Remove the pump gearbox coupling. See 442 Pump gearbox coupling assembly, replacing
23. Disconnect starter motor wire harness (1).
Figure 15
Removal, wire harness
24. Disconnect inlet hose (2), outlet hose (1) on the engine PTO pump.
Figure 16
Removal, inlet and outlet hose
WARNING
Do not disconnect or loosen connections for the air conditioning unit (AC). Risk of gas leakage.
25. Remove the compressor from the engine.
10. Figure 17
Removal, compressor
26. Disconnect the wire harness for all engine sensors.
27. Remove cover (1) and disconnect main wire harness (2).
Figure 18
Removal, cover
28. Disconnect radiator lower hose (1) and charge air cooler lower hose (2).
Figure 19
Disconnect, radiator and charge air cooler hose
1.
2.
Radiator hose
Charge air cooler hose
29. Disconnect the engine oil remote hose (1).
11. Figure 20
Disconnect, hose
30. Remove the engine mounting screws (4 places).
Figure 21
Removal, mounting screws
WARNING
The parts are heavy. Take appropriate safety precautions.
31. Fit tool 9998257 and connect 9998547 and a lifting device to the engine and remove the engine slowly.
12. Service Information
Document Title: Function Group: Information Type: Date:
Engine, installing 210 Service Information 2014/12/23
Profile:
EXC, EC360C L [GB]
Engine, installing
Op nbr 210-072
9998257 Lifting tool
9998547 Lifting device
NOTE!
Cable ties and clamps that secure hoses and electrical wring must be removed and then replaced when installing.
WARNING
The parts are heavy. Take appropriate safety precautions.
1. Fit tool 9998257 and connect lifting device 9998547 and hoist the engine slowly and install the engine.
2. Install the engine mounting screws (4 places).
NOTE!
Pay attention to the positioning of the brackets, cushions, and mounting screws (front/rear) when assembling.
Figure 1
Installation, engine
3. Connect engine oil remote hose (1).
13. Figure 2
Connect, hose
4. Connect radiator lower hose (1) and charge air cooler lower hose (2).
Figure 3
Connect, hose
1.
2.
Radiator hose
Charge air cooler hose
5. Install cover (1) and connect main wire harness (2).
Figure 4
Installation, wire harness and cover
6. Connect wire harness for all sensors to the engine.
7. Install the compressor to the engine.
14. Figure 5
Installation, compressor
8. Connect inlet hose (2) and outlet hose (1) of the engine PTO pump.
Figure 6
Connect, hose
9. Connect wire harness (1) to the starter motor.
Figure 7
Connect, wire harness
10. Connect the fuel line hoses (4 pcs).
15. Figure 8
Connect, fuel hose
11. Install the pump gearbox coupling. See 442 Pump gearbox coupling assembly, replacing
12. Install the main pump. See 913 Hydraulic pump, replacing
13. Connect the cab heater hoses to the engine block and water pump rear side.
Figure 9
Connect, hose
1. Cab heater hose on engine block
14. Connect turbocharger inlet hose (1).
Figure 10
Connect, hose
15. Install radiator fan (1).
16. Figure 11
Installation, radiator fan
16. Install radiator fan guard (1).
Figure 12
Installation, radiator fan guard
17. Connect hoses (1) for remote engine oil bypass filter.
Figure 13
Connect, hose
18. Connect radiator hose (2) and charge air cooler hose (1) on upper side.
17. Figure 14
Connect, hose
19. Install foot step (1).
Figure 15
Installation, foot step
20. Connect wire harness connector (2), hoses (3), and install expansion tank (1) with the bracket.
Figure 16
Connect, wire harness and hose
21. Install the cowl using a lifting device.
22. Install the cowl mounting screws.
23. Install the engine rear cover.
18. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
19. Figure 17
Installation, cover
24. Install screws (1) and open radiator hood (2).
Figure 18
Installation, radiator hood
25. Install silencer hood (1).
Figure 19
Installation, silencer hood
26. Fill the hydraulic oil. See 173 Hydraulic system, changing oil
27. Fill the coolant through the expansion tank. See 261 Coolant, changing
28. Turn on the battery disconnect switch.
29. Start the engine and check for leaks and repair if needed.