This document provides information on an engine, including its description, specifications, and maintenance procedures. It describes a 6-cylinder diesel engine that is water-cooled, turbocharged, and direct injected. It provides details on the engine's components, lubrication system, and fuel injection system. The document also includes specifications, diagrams, and instructions for adjusting the engine's valves and other maintenance tasks.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Volvo EC290 Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 210 Service Information 2014/10/31
Profile:
Engine, description
(CUMMINS C8.3–C)
The engine is a 6-cylinder, 4-stroke, direct injected, turbocharged, water cooled assembly with a cast iron block and
cylinder head.
Gears in the engine gear case are hardened helical type for strength and reduced noise, arranged to provide quiet,
smooth transmission of power.
The cylinder block and head are designed with internal passages formed as sets for lubrication and cooling. The
water pump and oil cooler are integrally mounted.
The fan belt is a poly type V-belt for improved performance and an auto tension adjuster maintains belt tension.
Figure 1
Engine, structure
1.
2.
3.
4.
5.
6.
7.
Fuel injection pump
Engine data plate
Fuel feed pump
Engine oil pressure sensor port (1/8″ NPTF)
Fuel primary filter/water separator
Fuel secondary filter
Water inlet/outlet (1/2″ NPTF)
2. Figure 2
Engine, top view
1.
2.
3.
4.
5.
6.
7.
Breather hose
Flywheel housing
Water filter
Exhaust gas pipe
Thermostat
Fan spacer
Fan drive pulley
A.
B.
Out
In
Figure 3
Engine, front view
1.
2.
3.
4.
5.
6.
7.
Turbocharger
Automatic belt tensioner
Alternator
Fan belt
Vibration damper
Dipstick gauge
Fan drive pulley
3. Figure 4
Engine, rear view
1.
2.
Fuel shut–off solenoid
Turbocharger wastegate
Figure 5
Engine turbocharger, side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Exhaust gas discharge port
Water filter connecting port (1/2″ NPTF)
Starter
Engine block
Oil pan
Engine oil cooler
Engine oil drain valve (M18 × 1.5P)
Temperature switch (for auto warm - up)
Water outlet
Water inlet
Engine characteristic curve
Engine characteristics
Item Specification
4. Rated output 200 PS / 1900 rpm
Max. torque (Net) 87 kgf·m / 1300 rpm
(629 lbf·ft / 1300 rpm)
Min. fuel consumption 155 g / ps·h
Rated fuel consumption 170 g / ps·h
Figure 6
Engine, characteristic curve
T. Torque
F. Fuel consumption
O. Output
E. Engine speed
NOTE!
For detailed information on the engine, consult the separate engine service manual.
5. Service Information
Document Title: Function Group: Information Type: Date:
Engine, specifications 210 Service Information 2014/10/31
Profile:
Engine, specifications
Specifications
Item Unit Specification
Make – Cummins diesel
Model – C 8.3–C
Type – 4–stroke, 6–cylinder, water cooling,
upright series, direct injection,
diesel engine, turbocharged
Rated output PS / rpm 200 / 1900
Maximum torque
(Net)
kgf·m / rpm
(lbf·ft / rpm)
87/ 1300
(629 / 1300)
Number of cylinder
Bore × Stroke
mm 6 – 114 × 135
Total displacement cc(cu·in) 8270 (505)
Compression ratio – 17.5 : 1
Low idle (No–load) 810 ~ 890
rpm
High idle (No–load) 2030 ~ 2110
Firing order – 1 – 5 – 3 – 6 – 2 – 4
Nozzle pressure kgf / cm2 (psi) 260 ~ 268 (3698 ~3812)
Inlet 0.30 (0.012)
Valve
clearance
mm
(inch)
Exhaust 0.61 (0.024)
Turbocharger – Installed
Fan Suction
–
Drive V–rib belt
kg 685
Weight of engine ( wet)
lb 1510
6. Service Information
Document Title: Function Group: Information Type: Date:
Valve clearance adjustment 214 Service Information 2014/10/31
Profile:
Valve clearance adjustment
Cummins C8.3–C
Valve clearance adjustment
Valves must be correctly adjusted for the engine to operate efficiently. Valve adjustment must be performed using the
specified values.
Adjust the valves at each 1000 hours or 1 year maintenance interval.
All the valve adjustments must be made when the engine is cold, and stabilized coolant temperature is 60 °C or below.
Figure 1
Adjustment condition
W. Water temperature
Valve clearance
Inlet valve 0.30 mm 0.012 in
Exhaust valve 0.61 mm 0.024 in
Remove the air inlet hose.
Figure 2
Removal, inlet hose
Remove the wastegate sensing line, support clamps and crankcase vent tube.
7. Figure 3
Removal. crankcase vent tube
Tools : 13, 18 mm Socket
Remove the valve cover.
Figure 4
Removal, valve cover
Tools : 15 mm Wrench
Locate top dead center for cylinder No.1 by rotating the crankshaft slowly while pressing on the engine timing pin.
Figure 5
Rotation, camshaft gear
Tools : 1/2″ driver, Part No. 3377371 Engine Barring tool.
When the pin engages the hole in the camshaft gear, cylinder No. 1 is at top dead center on the compression
stroke.
8. Figure 6
Position, cylinder No.1
1.
2.
3.
Camshaft gear
Engine timing pin
Gear housing
A. Compression stroke
CAUTION
Disengage the timing pin. Engine components may be damaged if the engine is rotated with the timing pin engaged.
Figure 7
Removal, timing pin
CAUTION
To prevent damage of push rod, make sure the adjusting screw ball is positioned in the socket of the push rod when
tightening.
Figure 8
Position, adjusting screw ball
9. The clearance is correct when slight resistance is felt as the feeler gauge is moved between the valve stem and
rocker lever.
At that point, tighten the lock nut.
Figure 9
Checking, clearance
Tools : Spanner 14mm, “-” Driver, feeler gauge.
Adjust the valves indicated (∗) in the table below.
After tightening the lock nut, check the valve clearance again.
If the clearance is not correct, readjust.
Valves to be adjusted ( )
Cylinder 1 2 3 4 5 6
Inlet (I) ∗ ∗ ∗
Exhaust (E) ∗ ∗ ∗
Figure 10
Valves to be adjusted
CAUTION
Be sure the timing pin is disengaged.
Mark the crankpulley and cover.
Rotate the crankshaft 360°.
10. Figure 11
Marking, crankpulley
Adjust the valves indicated (∗) in the table below.
After tightening the lock nut, check the valve clearance again.
If the clearance is not correct, readjust.
Valves to be adjusted ( )
Cylinder 1 2 3 4 5 6
Inlet (I) ∗ ∗ ∗
Exhaust (E) ∗ ∗ ∗
Figure 12
Valves to be adjusted
Valve cover–installation
Install the rubber seal into the groove in the valve cover. Start the installation at the overlap area shown in the
illustration.
Figure 13
Assembly, rubber seal
11.
Do not stretch the rubber seal. If the seal has more overlap than shown in this illustration, trim the excess to provide
the proper overlap.
Install new o-rings on the valve cover screws.
Figure 14
Assembly, o-ring
NOTE!
Engines equipped with wastegate turbochargers must have a studded screw installed in the third hole from the front. This is
for the wastegate actuator hose clamp.
Install the valve cover screws and tighten in the sequence shown.
Figure 15
Screw tightening sequence
Tools : 15 mm spanner
Tightening torque : 24 N·m (18 lbf·ft)
Crankcase breather tube–installation
Install the breather tube and hose clamps.
Tighten the screws for the breather tube support brackets.
12. Figure 16
Assembly, breather tube
Tightening torque : A = 24 N·m (18 lbf·ft), B = 43 N·m (32 lbf·ft)
Tools : 13, 18 mm spanner
Injection nozzles–installation
Lubricate the sealing lips of the sleeve with anti-seize compound. Assemble the injection nozzle, the sealing sleeve,
a new copper washer and the hold-down clamp.
Use only one washer.
A light coat of clean 15W–40 engine oil between the washer and the injection nozzle will aid in holding the washer
in place during installation.
Figure 17
Apply, anti-seize compound
Install the hold-down injection nozzle assembly into the injection nozzle bore. The injector leak–off connection
must be toward the valve cover.
Figure 18
Assembly, injection nozzle
Install the hold-down screw.
Figure 19
Screw in, hold-down screw
14. Service Information
Document Title: Function Group: Information Type: Date:
Engine mounting 218 Service Information 2014/10/31
Profile:
Engine mounting
Figure 1
Engine mounting, side view
A : Cushion
F : Front-fan side view
R : Rear- flywheel side view
Tightening torque, unit : kgf·m (lbf·ft)
No. Mounting position Tightening torque
M12 x 1.75 x 35L
1 Engine mounting bracket (front)
11 ~ 12 (79 ~ 87)
M12 x 1.75 x 50L
2 Engine mounting bracket (rear)
7.2 ~ 8.4 (52 ~ 61)
M22 x 2.5 x 130L
3 Engine mounting cushion
63 ~ 77 (455 ~ 557)
NOTE!
Check the color markings for cushion installation.
Figure 2
Cushion (A - detail)
16. Service Information
Document Title: Function Group: Information Type: Date:
Lubricating system,
description
220 Service Information 2014/10/31
Profile:
Lubricating system, description
Engine lubricating oil is supplied to the contact faces of rotating components such as turbocharger, crankshaft,
camshaft, piston, inlet/exhaust valve, rocker arm and timing gear by means of forced lubrication from the oil pump.
Lubricating oil flow diagram
Figure 1
Lubrication oil flow
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Oil pump
Pressure regulating valve
Oil cooler
Oil filter
Filter bypass valve
Turbocharger oil supply
Turbocharger oil drain
Main oil supply circuit
Rocker lever oil supply (#7 cam bushing)
Piston cooling nozzle
Injection pump oil supply (#1 cam bushing)
Oil pump idler gear
17. Service Information
Document Title: Function Group: Information Type: Date:
Lubricating system,
specifications
220 Service Information 2014/10/31
Profile:
Lubricating system, specifications
Specifications
Item Unit Specification
Lubricating – Forced circulation
Low 0.7~2.1 (10~30)
Oil pressure kgf / cm2 (psi)
Rated 2.1~3.5 (30~50)
Liter 25.5
Engine oil pan capacity
gal 6.7
18. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
19. Service Information
Document Title: Function Group: Information Type: Date:
Fuel injection system 230 Service Information 2014/10/31
Profile:
Fuel injection system
Highly pressurized fuel compressed by the fuel injection pump is direct injected through the injection nozzle into
the combustion chamber.
Remaining fuel after injection is returned to tank automatically.
A water separator installed to protect the fuel system components provides a means to drain off the water and
contaminants collected from the system.
Fuel flow system diagram
Figure 1
Fuel flow system
1.
2.
Fuel feed pump
Fuel filter