The document describes the internal exhaust gas recirculation (IEGR) system used on the engine. The IEGR system uses a hydraulic mechanism located in IEGR units on the rocker arm holders. When activated by the ECU, a solenoid valve allows oil flow to the IEGR unit which increases pressure and causes a servo piston to open the exhaust valve for a short time during induction. This allows some exhaust gases to reenter the cylinder, reducing NOx formation. The system precisely controls exhaust gas recirculation through hydraulic components like the main piston, control valve, and servo piston.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfrou774513po
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. They
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with sections on basic checks, error codes, components, parameters, and control units.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with strategies, tools, error codes, component tests, parameters, and more to aid in diagnosis of issues.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The basic check procedures for the engine are also outlined, including compression checks, sensor tests, and measuring fuel pressure. Troubleshooting information and strategies are provided.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. The
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfrou774513po
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. They
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with sections on basic checks, error codes, components, parameters, and control units.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with strategies, tools, error codes, component tests, parameters, and more to aid in diagnosis of issues.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The basic check procedures for the engine are also outlined, including compression checks, sensor tests, and measuring fuel pressure. Troubleshooting information and strategies are provided.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. The
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Troubleshooting information is provided, along with test procedures in the basic engine check. Error codes, components, parameters, and control unit functions are described to assist with troubleshooting.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, cooling, and exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
This document provides descriptions of engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertical air intake and horizontal exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liners are wet sleeves sealed with two O-rings at the bottom.
- The pistons are aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearings. They use two compression rings and one oil ring.
- The piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge.
Volvo L40B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on engine descriptions and service procedures for various components of DEUTZ and VOLVO diesel engines, including:
- The engines are four cylinder, four stroke engines with direct injection and turbocharging.
- Compression tests should yield results between 3-3.8 MPa across cylinders.
- The cylinder head is made of cast iron with vertical inlet and horizontal exhaust on the same side.
- Valves are adjusted using a rotation tool to specified clearances, checking with a feeler gauge.
- The timing gears are located at the flywheel end for the camshaft and power take-off, using stamped markings for setting.
Volvo L35B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information about engines that are equipped on various machine models, including the Deutz-BF4L 1011 FT engine and Volvo D3D and D3.6D engines. It describes the engine components and systems, as well as procedures for removing and installing the engine.
More Related Content
Similar to Volvo EC240B FX EC240BFX Excavator Service Repair Manual Instant Download.pdf
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Troubleshooting information is provided, along with test procedures in the basic engine check. Error codes, components, parameters, and control unit functions are described to assist with troubleshooting.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, cooling, and exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
This document provides descriptions of engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertical air intake and horizontal exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liners are wet sleeves sealed with two O-rings at the bottom.
- The pistons are aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearings. They use two compression rings and one oil ring.
- The piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge.
Similar to Volvo EC240B FX EC240BFX Excavator Service Repair Manual Instant Download.pdf (20)
Volvo L40B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on engine descriptions and service procedures for various components of DEUTZ and VOLVO diesel engines, including:
- The engines are four cylinder, four stroke engines with direct injection and turbocharging.
- Compression tests should yield results between 3-3.8 MPa across cylinders.
- The cylinder head is made of cast iron with vertical inlet and horizontal exhaust on the same side.
- Valves are adjusted using a rotation tool to specified clearances, checking with a feeler gauge.
- The timing gears are located at the flywheel end for the camshaft and power take-off, using stamped markings for setting.
Volvo L35B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information about engines that are equipped on various machine models, including the Deutz-BF4L 1011 FT engine and Volvo D3D and D3.6D engines. It describes the engine components and systems, as well as procedures for removing and installing the engine.
Volvo L30B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information for removing and installing an engine. It describes the steps to remove components like the counterweight, hydraulic pump, fuel lines and exhaust pipe. It then outlines the reverse process to install the engine, connecting all components back in place and ensuring proper attachment of hoses, wires and brackets. Special precautions are mentioned like using lifting equipment due to heavy parts and marking disconnected hoses.
Volvo L25F Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
This document provides instructions for removing and installing an engine. It describes disconnecting fuel lines, electrical connections, removing mounting brackets, and lifting the engine out of the machine using hoisting equipment. The installation instructions describe lowering the engine back into place and reconnecting all lines, brackets and electrical connections in the reverse order of removal. Safety warnings are provided to be alert when handling heavy components.
Volvo L25B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on removing and installing a VOLVO diesel engine. It describes:
- Removing components like the air duct, fuel lines, hydraulic pump, and disconnecting electrical connections.
- Lifting the engine out of the machine using a lifting device.
- Installing the engine by lowering it into the engine bay and reconnecting all components in reverse order.
- Reattaching items like the fuel lines, electrical connections, exhaust pipe, and mounting the engine securely.
Volvo L20F Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
This document provides information on removing and installing an engine. It describes the steps to remove the engine by disconnecting electrical and mechanical components like fuel lines, exhaust pipes, and brackets. It then explains the reverse process to install the new engine by reconnecting all components and performing tests to check for proper operation.
Volvo L20B Compact Wheel Loader Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on removing and installing a VOLVO diesel engine. It describes:
- Removing the engine hood, counterweight, fuel lines, electrical connections, and lifting the engine out.
- Installing the engine by lowering it into place, reconnecting fuel lines, electrical connections, and installing the counterweight.
- Tightening engine mount bolts and other fasteners to specified torques is important for a secure installation.
Volvo G990 Motor Grader Service Repair Manual Instant Download.pdfzhenchun51
This document provides instructions for checking camshaft and flywheel signals on an engine using a VCADS Pro computer, oscilloscope, and various connection cables and adapters. The procedure involves connecting the equipment, performing a test operation in the VCADS Pro software, and saving or viewing the signal readouts on the oscilloscope screen to check for proper camshaft and flywheel operation. Connecting various interfaces and changing settings may be required depending on the computer port configuration.
Volvo G976 Motor Grader Service Repair Manual Instant Download.pdfzhenchun51
This document provides instructions for checking camshaft and flywheel signals on an engine using a VCADS Pro computer, oscilloscope, and various connecting cables and adapters. The procedure involves connecting the equipment, performing a test operation in the VCADS Pro software, and saving or viewing the signal readouts on the oscilloscope screen to check for proper camshaft and flywheel operation. Connecting equipment like interfaces, breakout harnesses, and cables is also described.
Volvo G970 Motor Grader Service Repair Manual Instant Download.pdfzhenchun51
This document provides instructions for checking camshaft and flywheel signals on a Volvo engine using a VCADS Pro computer, oscilloscope, and various connecting cables and adapters. The procedure involves connecting the equipment, performing test 28420-3 in the VCADS Pro software, and observing the camshaft and flywheel signals on the oscilloscope screen to check for proper operation. Connecting instructions and notes about interface configurations are also provided.
Volvo G960B Motor Grader Service Repair Manual Instant Download.pdfzhenchun51
The document provides instructions for removing an engine from a machine. It describes disconnecting various engine components like hoses, wiring harnesses, and mounting brackets. Over 40 individual steps are outlined to properly drain fluids, label parts for reinstallation, and detach components like the radiator, fuel lines, charge air cooler, and exhaust system. Special tools are required to lift the engine out of the machine once all connections are removed.
Volvo FC3329C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information about an engine, including:
1) The D7E engine is a four-stroke, straight six cylinder, turbocharged diesel engine with charge air cooling and wet cylinder liners.
2) The engine uses Common Rail fuel injection controlled by an electronic control unit. Internally recirculated exhaust gas reduces emissions without aftertreatment.
3) The document describes various engine components like the camshaft, crankshaft, vibration damper, and connecting rods. It also provides maintenance instructions for changing the oil level sensor.
Volvo FC2924C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides technical specifications and descriptions for various engine components of the D7E engine. It includes 3 sentences or less summaries of sections on the cylinder head, cylinder liners, pistons, valves, camshaft, crankshaft, vibration damper, and connecting rod. Diagrams and illustrations are provided to accompany each section. The document appears to be a service manual or technical specification sheet for mechanics working on this engine model.
Volvo FC2421C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The engine model and serial number are stamped on an identification plate attached to the cylinder head cover.
3) Tightening torques are provided for many engine components, such as the cylinder head cover, injectors, fuel lines, and more.
Volvo FC2121C Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides service information for an engine, including:
1) The D6E engine is a six-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses common rail fuel injection controlled by an electronic control unit.
2) The document describes various engine components like the cylinder head, pistons, valves, and their locations on the engine.
3) Instructions are provided on adjusting the valve clearance and IEGR unit, which requires using special tools and rotating the crankshaft to specific positions.
Volvo EW230C Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on the D6E engine configuration, which is a four-stroke, straight six cylinder, turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses Common Rail fuel injection controlled by an electronic control unit. The cylinders are numbered consecutively from the flywheel end and the engine rotates counterclockwise. The engine identification plate provides the model and serial number. The document describes the location of various engine components and systems.
Volvo EW210C Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on the D6E engine configuration, which is a four-stroke, straight six cylinder, turbocharged diesel engine with charge air cooling and wet cylinder liners. It uses Common Rail fuel injection controlled by an electronic control unit. The cylinders are numbered consecutively from the flywheel end and the engine rotates counterclockwise. The engine identification plate provides the model and serial number. Key components like the fuel system, cooling system and electrical connections are described. Procedures for removing and replacing the engine are outlined.
Volvo EW180C Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides technical specifications and descriptions of engine components for a Volvo D6E diesel engine, including:
- The D6E engine is a 4-stroke, 6-cylinder turbocharged diesel engine with charge air cooling and wet cylinder liners.
- The engine uses a common rail fuel system and electronically controlled internal exhaust gas recirculation.
- The document describes the cylinder head, cylinder liners, pistons, piston rings, and provides diagrams of engine components and their locations.
Volvo EW180 Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine characteristic curve, engine description, valve clearance adjustment procedure, fuel injection system overview, and fuel line description for a Cummins B5.9-C engine. It includes engine specifications, diagrams of the engine and its systems, maintenance procedures such as adjusting valve clearance, and descriptions of components like the fuel injection system and fuel lines. Proper maintenance such as adjusting valve clearance every 1000 hours is emphasized for engine efficiency.
Volvo EW145B Wheeled Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine including:
- The engine is a 6-cylinder turbocharged diesel with a cast iron block and head.
- Gears in the engine case are hardened helical type for strength and reduced noise.
- The block and head have internal passages for lubricating oil and coolant.
- The document includes diagrams showing engine components and their locations.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Volvo EC240B FX EC240BFX Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Go back to Index Page
Engine, description
The engine is a 6-cylinder, 4-stroke, direct injected, turbocharged, air to air aftercooled, water cooled assembly with a cast
iron block and cylinder head.
Figure 1
Engine, start motor side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
Air conditioner compressor pulley
Engine oil pressure sensor port
Make up line
Coolant temperature sensor port
Water inlet
Lifting lug
Water outlet
Air inlet
Start motor
2. Figure 2
Engine, air heater side view
1.
2.
3.
4.
5.
Fuel return line
Air heater
Coolant preheater port
Coolant filter supply
Fuel suction line
Figure 3
Engine, top view
1.
2.
3.
4.
Water inlet
Return from heater
Engine oil filler
Supply to heater
3. 5.
6.
7.
8.
Oil dipstick
Air inlet
Water outlet
Exaust line
Figure 4
Engine, front view
1.
2.
3.
4.
Alternator
From charge air cooler
To charge air cooler
Oil drain valve
5. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Go back to Index Page
Engine, description
D7E -Tier 3 / Tier 3 base tier 2
The D7E configuration is a four stroke, straight six cylinder, turbocharged, direct injected diesel engine with charge air
cooling and wet, replaceable cylinder liners.
The D7E engine uses a Common Rail Fuel System controlled by the engine electronic control (E-ECU) software.
Electronically controlled IEGR (Internal Exhaust Gas Recirculation) reduces NO formation and lowers emissions without the
need for exhaust after treatment (Only applied Tier 3 engine)
Volvo's latest engine management system, EMS 2 is used to control all engine electronic functions.
The cylinders are numbered consecutively beginning at the flywheel end. Engine rotational direction is counterclockwise as
seen from the flywheel end.
Figure 1
Engine, D7E
6. Service Information
Document Title: Function Group: Information Type: Date:
Component locations 200 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Component locations
Component position, engine D7E. The following figures show the position of a number of components on engine D7E.
Figure 1
Component locations, front side
1 Engine oil filler 11 Engine oil cooler
2 Air inlet 12 Coolant heater port
3 Transport eye 13 Oil dipstick gauge
4 Alternator 14 Power take off
5 Fuel feed pump 15 Fuel filter
6 V-rib belt drive on crankshaft 16 Crankcase bleeding valve
7 V-rib belt 17 High pressure fuel pump
8 Automatic belt tensioner 18 Common rail
9 Engine oil filter 19 Injector
10 Coolant pump 20 Waste gate actuator
7. Figure 2
Component locations, flywheel side
21 Crankcase bleeding valve 28 Air outlet (to charge air cooler)
22 Flywheel housing 29 Coolant inlet
23 Starter motor 30 Coolant outlet
24 Oil pan 31 Air inlet (from charge air cooler)
25 Drain plug 32 Exhaust manifold
26 Oil return line from turbocharger 33 Cylinder rocker arm cover
27 Turbocharger
8. Service Information
Document Title: Function Group: Information Type: Date:
Engine characteristic curve 210 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Engine characteristic curve
Figure 1
Engine, characteristic curve
A be (g/kW/h) : Fuel consumption C rpm : Engine speed
B T (N m) : Torque D P (kW) : Power
9. Service Information
Document Title: Function Group: Information Type: Date:
Basic check, Engine 210 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Basic check, Engine
NOTE!
Certain tests and checks are performed with unlocked safety locking lever. Make sure that the machine cannot operate
unexpectedly when the safety locking lever is unlocked.
Purpose of the basic check
The purpose of the basic check is to provide fast and accurate information about the general condition of the engine.
The basic check should be performed and evaluated according to instructions in the PC-tool VCADS Pro.
Tests included in the basic check
The basic check which is divided into the following tests should be performed after reading out error codes and checking
parameters.
Tests:
1.
2.
3.
4.
Cylinder compression, test
The purpose of the test is to show if any cylinder has a deviating compression pressure. The test replaces the old
pressure check method but does not give any absolute values.
Cylinder balancing, test
The purpose of the test is to show if there is any deviation in the fuel injection to a cylinder.
Feed pressure, test
The purpose of the test is to check that the feed pressure is as per specification.
Sensor, test
The purpose of the test is to check the function of all sensors.
10. Service Information
Document Title: Function Group: Information Type: Date:
Troubleshooting 210 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Troubleshooting
General about troubleshooting
When a malfunction is suspected or has been confirmed, it is important to identify the cause as soon as possible.
The starting point for all troubleshooting is that there is some type of trouble symptom or malfunction.
Malfunctions can be indicated by:
generation of error codes
detection of a malfunction symptom.
Troubleshooting work
The first step in troubleshooting is to gather information from the operator concerning the malfunction symptoms, see
Electrical and information system, Collection of basic data. Then, attempt to pin-point the cause by checking in a certain
order, for more information, see Electrical and information system, troubleshooting strategy.
The different checking steps are:
Check error codes
Check parameters
Perform basic check
Troubleshooting information
The following is included in Electrical and information system and is used when troubleshooting:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Troubleshooting strategy
Describes troubleshooting work, step by step.
Troubleshooting, assistive devices
Brief summary of the assistive devices that are available for troubleshooting.
Functional checks and tests, VCADS Pro
Brief description of VCADS Pro. For a detailed description, see VCADS Pro User’s Manual.
Error code information
Contains information regarding error code design, lists of all error codes and error code information about each
error code.
Components, troubleshooting and specifications
Contains methods and measuring values for troubleshooting of components. Also includes wiring diagrams and
certain specifications.
Parameters
Incorrectly set parameters may cause malfunction symptoms. The parameter list includes all limit and command
values for parameters.
Control units, functional description
Describes the functions of the control units, inputs and outputs as well as communication between the various
control units.
Control units, active and passive measuring
Contains measuring values for active and passive measuring of the ECUs.
Software functions
Describes the pre-requisite conditions for the control and monitoring functions that are performed by the software
in the ECUs.
11. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Cylinder head, description
The cylinder head is made of grey cast iron and is common for all cylinders. The induction air enters vertically (A) and the
exhausts leave horizontally (B). Inlets and exhaust outlets are located on the same side of the cylinder block. Inlet and
exhaust valve size is increased to optimize the gas exchange and combustion process. Valve guides are replaceable. Coolant
flow in the cylinder head is modified to accommodate an outlet controlled cooling system.
On order for the engine to fulfill governing emission standards, there are 3 cylinder head gaskets of different thicknesses
between the cylinder head and the piston.
Figure 1
12. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head gasket,
description
211 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Cylinder head gasket, description
The cylinder head gasket is a multi layered gasket with 1, 2 or 3 identification holes to indicate three different thicknesses
available. Selection of the proper thickness of gasket is determined by the measurement of piston projection above the
cylinder block sealing surface. Recalibration for the correct gasket thickness would be required if new pistons or a new
cylinder block were installed.
Figure 1
1. Cylinder head gasket, marking
13. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder liner, description 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Cylinder liner, description
The engine has a cylinder block with wet (replaceable) cylinder liners. The bottom part of the liner is sealed against the
cylinder block with two O-rings positioned in grooves machined into the lower end of the liner.
The upper part of the cylinder liner is sealed by the cylinder head gasket and the pressure created by the cylinder head
clamping force against liner protrusion.
Figure 1
Cylinder liner
14. Service Information
Document Title: Function Group: Information Type: Date:
Pistons, description 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Pistons, description
The pistons of the engine are made of special alloy aluminium.
The top of the piston has a combustion cavity and a flywheel symbol to indicate the correct piston orientation.
Piston cooling is by oil spray to the inside of the piston from nozzles located in the main bearing pedestals.
The pistons are provided with three piston rings, two compression rings and one oil control ring.
The first or top compression ring has a cast iron carrier. The cross-section area for the second compression ring is tapered.
The third ring is an oil ring with a bevelled edge.
When installing the piston rings, the marking TOP by the opening in the rings must be face up.
Figure 1
1.
2.
Flywheel symbol
Iron carrier
15. Service Information
Document Title: Function Group: Information Type: Date:
Piston rings, description 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Piston rings, description
Each piston is equipped with two compression rings and one oil ring. The uppermost compression ring is of the "Keystone"
type (dual trapezoid-formed cross section). Compressions rings should be placed with the text facing upwards.
The oil ring is equipped with two scraping edges, which are pressed against the cylinder wall using the spring tension in the
ring and an expander spring placed on the inside of the ring. The oil ring can be placed on either side but should be placed
with expander spring and oil ring openings 180° from one another.
Figure 1
16. Service Information
Document Title: Function Group: Information Type: Date:
Piston cooling 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Piston cooling
Figure 1
Piston cooling
The piston is cooled by spraying lube oil against the inside of the piston top.
The 2-hole piston cooling nozzles made of plastic are fitted in the main bearing pedestals.
17. Service Information
Document Title: Function Group: Information Type: Date:
Valves, description 214 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Valves, description
The engines are equipped with one inlet and one exhaust valve per cylinder.
At the upper end of the valve guide, there is an O-ring seal (A) against the valve spindle to prevent major oil consumption
and to reduce the amount of hydrocarbons in the exhausts.
The valves are rotated by the eccentric action of the rocker arms.
The new compressed tapered shape enables the valves to turn easily despite loading.
Rocker arm lubrication is part of the engine force-feed lubrication system. The oil is supplied via the tappets and push rods.
If the valve guides are replaced, they are obtained in another version (B) to facilitate installation.
Figure 1 shows a valve guide installed in production and figure 2 shows a replacement guide.
Figure 1
18. Service Information
Document Title: Function Group: Information Type: Date:
Internal Exhaust Gas
Recirculation (IEGR),
description
214 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Internal Exhaust Gas Recirculation (IEGR), description
A system for IEGR (Internal Exhaust Gas Recirculation) is used as part of V-ACT (Volvo Advanced Combustion Technology).
On D6E and D7E this takes place by an IEGR-opening piston, controlled by the lubrication oil's system pressure, acting on
the exhaust rocker arm which enables a second opening of the exhaust valves. When activated, the secondary piston will
give a limited valve opening of the exhaust valves during the induction phase, which leads exhausts back into the cylinder.
Included components
IEGR-unit
The hydraulic mechanism is housed in two interconnected IEGR-units, located on the rocker arm holders. Lubrication oil is
routed from the cylinder head via the solenoid valve to the high-pressure channel in the IEGR-unit through a channel in one
of the rocker arm holders.
Figure 1
1. IEGR-unit
Solenoid valve
The solenoid valve is located in the cylinder head on the flywheel side and is activated by the EECU via the control system
EMS 2. When IEGR is not activated, the solenoid valve is closed and no oil flow is allowed into the IEGR-unit. At activation of
IEGR, the solenoid valve opens the channel from the engine's lubrication system to the IEGR-unit.
19. Figure 2
1. Solenoid valve
Control valve
The control valve is located in the IEGR-unit between the high-pressure circuit and low-pressure circuit. When the low-
pressure circuit is supplied from the lubrication oil system, the control valve is lifted and closes the high-pressure circuit. The
ball in the control valve enables filling of the high-pressure circuit when IEGR is activated.
The lubrication oil is drained through the control valve.
Figure 3
1. Control valve
Main piston
The main piston is acted on by the adjusting screw on the inlet valve's rocker arm, and affects the oil pressure in the IEGR-
unit's high-pressure channel. At the end of the IEGR-phase, a pressure of 100 bar is generated in the high-pressure circuit.
Figure 4
1. Main piston
Servo piston
The servo piston is activated by the hydraulic pressure from the main piston via a channel in the IEGR-unit when the IEGR-
function is active/on (solenoid valve in open position). Then the servo piston opens the exhaust valves via the rocker arm an
extra time during the induction stroke.
20. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
21. Figure 5
1. Servo piston
Function
IEGR is activated by the system being supplied with full lubrication oil system pressure via the solenoid valve. The solenoid
valve is activated by the E-ECU.
The control valve closes the high-pressure circuit and the ball inside the valve enables filling of the system.
With the same movement as the inlet valve's rocker arm opens the valve, the main piston is forced upward. The pressure in
the IEGR-unit's high-pressure channel (up to 100 bar) overcomes the spring force in the servo piston. the servo piston forces
down the rocker arm, which results in the exhaust valve being open for a short time at the end of the induction stroke.
Exhausts from the exhaust manifold are sucked into the cylinder by vacuum from the other cylinders.
The breather hole between the low-pressure channel and the high-pressure channel in the IEGR-unit enables longer exhaust
recirculation at high engine speed.
Figure 6
IEGR-system (inactive)
1.
2.
3.
4.
5.
6.
Servo piston
Control valve
Solenoid valve
2–5 Bar lubrication oil pressure
Breather hole
Oil channel, low-pressure