The document describes the internal exhaust gas recirculation (IEGR) system used on the engine. The IEGR system uses a hydraulic mechanism located in IEGR units on the rocker arm holders. When activated by the ECU, a solenoid valve allows oil flow to the IEGR unit which increases pressure and causes a servo piston to open the exhaust valve for a short time during induction. This allows some exhaust gases to reenter the cylinder, reducing NOx formation. The system precisely controls exhaust gas recirculation through hydraulic components like the main piston, control valve, and servo piston.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfrou774513po
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. They
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with sections on basic checks, error codes, components, parameters, and control units.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with strategies, tools, error codes, component tests, parameters, and more to aid in diagnosis of issues.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The basic check procedures for the engine are also outlined, including compression checks, sensor tests, and measuring fuel pressure. Troubleshooting information and strategies are provided.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. The
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfrou774513po
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. They
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with sections on basic checks, error codes, components, parameters, and control units.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with strategies, tools, error codes, component tests, parameters, and more to aid in diagnosis of issues.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The basic check procedures for the engine are also outlined, including compression checks, sensor tests, and measuring fuel pressure. Troubleshooting information and strategies are provided.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liner has a wet (replaceable) design sealed with two O-rings.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearing pedestals. They use two compression rings and one oil ring.
- Piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge. The
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Troubleshooting information is provided, along with test procedures in the basic engine check. Error codes, components, parameters, and control unit functions are described to assist with troubleshooting.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, cooling, and exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
This document provides descriptions of engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertical air intake and horizontal exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liners are wet sleeves sealed with two O-rings at the bottom.
- The pistons are aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearings. They use two compression rings and one oil ring.
- The piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge.
Volvo L150F Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides instructions for removing an engine from a machine. It outlines 18 steps including draining fluids, disconnecting hoses and electrical connections, and removing components attached to the engine like the filter housing. Safety precautions are noted, and references to other documents are provided for additional details on tasks like draining fluids and removing parts. Tools needed include lifting equipment and various fastener removal tools.
Volvo L150E Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides instructions for removing an engine from a machine. It describes draining the coolant and oil first. Various hoses, belts, and electrical connections are then disconnected from both sides of the engine. The partition wall and other components are removed to access the engine mounts. Lifting devices are attached to the engine and the mounts are unbolted to lift the engine out after securing the transmission. The process is described over 16 steps with diagrams to illustrate key points.
More Related Content
Similar to Volvo EC240B FX EC240BFX Excavator Service Repair Manual Instant Download.pdf
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B FX (EC290BFX) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
This document provides descriptions of various engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertically entering induction air and horizontally exiting exhaust. It uses three different thickness cylinder head gaskets.
- The engine uses wet cylinder liners sealed with two O-rings and pressure from the cylinder head.
- The pistons are made of aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles. They use two compression rings and one oil control ring.
- Piston rings include two compression rings, one with a cast iron carrier, and an oil ring with a beveled edge. They are installed with
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. The document provides information and diagrams related to performing basic checks, troubleshooting, and maintenance of the engine.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information is also provided, with steps like checking error codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdfdai20nao
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes diagrams and descriptions of the engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Troubleshooting information is provided, along with test procedures in the basic engine check. Error codes, components, parameters, and control unit functions are described to assist with troubleshooting.
Volvo EC290B LC (EC290BLC) Excavator Service Repair Manual Instant Download.pdffapanhe306271
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, and internal exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests to diagnose issues.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdftepu22753653
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdff8iosedkdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfrou774513po
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzhenchun51
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes diagrams and descriptions of the engine components, such as the cylinder head, liners, pistons, rings, valves, cooling, and exhaust gas recirculation system.
3. Troubleshooting information and procedures are also outlined, such as checking codes, parameters, and performing basic engine tests.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfzu0582kui
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and aftercooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, valves, and an internal exhaust gas recirculation system.
3. Figures and diagrams are provided to illustrate engine components and systems like the cylinder head, piston rings, piston cooling, and IEGR system.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdflunrizan628
The document provides information on an engine, including:
1. The engine is a 6-cylinder, 4-stroke diesel engine with a cast iron block and head. It uses direct injection, turbocharging, and air-to-air cooling.
2. The document includes descriptions of various engine components like the cylinder head, liners, pistons, rings, valves, and an internal exhaust gas recirculation system.
3. It also provides an engine characteristic curve showing power, torque, and fuel consumption curves. Basic checks, troubleshooting information, and service information are outlined.
Volvo EC290B LR (EC290BLR) Excavator Service Repair Manual Instant Download.pdfnie7140zhuang
This document provides descriptions of engine components for a Volvo D7D engine, including:
- The cylinder head is made of grey cast iron with vertical air intake and horizontal exhaust. It uses three different thickness cylinder head gaskets.
- The cylinder liners are wet sleeves sealed with two O-rings at the bottom.
- The pistons are aluminum alloy with a combustion cavity, flywheel symbol, and cooled by oil spray from nozzles in the main bearings. They use two compression rings and one oil ring.
- The piston rings include two compression rings, one with a cast iron carrier, and one oil ring with a beveled edge.
Similar to Volvo EC240B FX EC240BFX Excavator Service Repair Manual Instant Download.pdf (20)
Volvo L150F Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides instructions for removing an engine from a machine. It outlines 18 steps including draining fluids, disconnecting hoses and electrical connections, and removing components attached to the engine like the filter housing. Safety precautions are noted, and references to other documents are provided for additional details on tasks like draining fluids and removing parts. Tools needed include lifting equipment and various fastener removal tools.
Volvo L150E Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides instructions for removing an engine from a machine. It describes draining the coolant and oil first. Various hoses, belts, and electrical connections are then disconnected from both sides of the engine. The partition wall and other components are removed to access the engine mounts. Lifting devices are attached to the engine and the mounts are unbolted to lift the engine out after securing the transmission. The process is described over 16 steps with diagrams to illustrate key points.
Volvo L250G Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides instructions for changing a non-programmed E-ECU (engine control unit) on an engine with MID 128. The steps include: placing the machine in service position 1, connecting the VCADS Pro programming tool, turning off voltage, removing covers, disconnecting connectors and hoses from the old ECU, replacing the ECU, reconnecting connectors and hoses, and finishing installation. Connectors are unplugged, cable clamps removed, cooling coil disconnected, old ECU replaced with new one, then cooling coil, connectors and clamps are reinstalled.
Volvo L180G Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides instructions for changing a non-programmed E-ECU (engine control unit) on an engine with MID 128. The steps include: placing the machine in service position 1, connecting the VCADS Pro programming tool, turning off voltage, removing covers, disconnecting connectors and hoses from the old ECU, replacing the ECU, reconnecting connectors and hoses, and finishing installation. Connector locations and part numbers for the required tooling are also provided.
This document provides instructions for changing a non-programmed E-ECU (Engine Electronic Control Unit) with MID 128 on a machine. The steps include:
1. Placing the machine in service position 1 and connecting the VCADS Pro programming tool.
2. Turning off the voltage with the battery disconnector.
3. Removing the engine cover and crankcase ventilation pipe.
4. Disconnecting connectors and cables from the old E-ECU and installing the new non-programmed E-ECU.
Volvo L220D Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information about the cooling system, Pump 3 which controls the cooling fan, and procedures for checking the cooling fan speed and Pump 3 pressure settings on a loader. Key details include:
- The cooling system integrates cooling for the engine, transmission, hydraulics, and optional axle cooling.
- Pump 3 controls the variable speed cooling fan and brake pressure. Its pressure can be checked and adjusted.
- Checks involve connecting gauges and monitors, running the engine at idle and full throttle to read fan speeds and pressures.
- Proper fan speeds are 400-1600 RPM depending on temperature, and Pump 3 pressure should be 1.95-2.10 MPa at idle.
Volvo L180F Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides instructions for removing an engine from a machine. It includes preparing the machine by draining fluids like coolant, engine oil, and transmission oil. Components that need to be disconnected from the engine are then listed, such as hoses, pipes, sensors, and guards. Tools needed include lifting equipment and drain hoses. Safety precautions are noted, such as placing the machine in service position and disconnecting the fire suppression system.
Volvo L90F Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides service information for removing an engine from a machine. It outlines the steps to drain fluids, disconnect hoses and electrical connections, and remove covers and panels to access the engine. Key steps include draining engine oil, transmission oil, and hydraulic oil, disconnecting coolant hoses and charge air pipes, and removing lower covers and side panels. Lifting tools such as slings and lifting eyes are recommended to lift the engine out once it is fully disconnected.
Volvo L150G Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides instructions for changing a non-programmed E-ECU (engine control unit) on an engine with MID 128. The steps include: placing the machine in service position 1, connecting the VCADS Pro programming tool, turning off voltage, removing covers, disconnecting connectors and hoses from the old ECU, replacing the ECU, reconnecting connectors and hoses, and finishing installation. Diagnostic information for relevant error codes is also listed.
Volvo L180E Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides instructions for removing an engine from a vehicle. It describes draining the coolant and oils, disconnecting hoses and electrical connections, and removing components to access the engine. Lifting eyes, slings and a lifting tool are used to attach to the engine for removal. The transmission is secured in place and the engine mount bolts removed to lift the engine out. Components may be transferred to a new engine if replacing it.
Volvo MC60B Skid Steer Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides instructions for removing the engine from MC60B and MC70B models. It is a 34 step process that involves draining fluids, disconnecting hoses and electrical connections, removing mounting hardware, and then lifting the engine out of the machine using an overhead hoist. Key steps include draining the coolant and transferring it to a storage container, disconnecting the fuel lines, radiator hoses, exhaust system, and harness connections, and then removing the engine mounts before lifting the engine free of the transmission shaft.
This document provides instructions for removing an engine from a machine. It includes preparing the machine by draining fluids like coolant, engine oil, and transmission oil. Components that need to be disconnected from the engine are then listed, such as hoses, pipes, wires, and sensors. Tools needed for the job include a lifting tool, slings, lifting eyes, nuts, and a ratchet block. Safety precautions are mentioned, like placing the machine in service position and turning off the main power.
Volvo L70G Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides instructions for replacing the engine rotation speed sensor for the crankshaft and camshaft on a WLO L70G machine. The procedures include placing the machine in service position, removing components to access the sensors, unplugging connectors, loosening mounting screws, replacing the O-rings, installing new sensors and reconnecting connectors, and restoring the machine.
Volvo L330D Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on servicing an engine 200, including checking liquid levels, control lamps, battery voltage, fuses, and separate systems. It describes checking the engine for issues like low stall speed, discolored oil or coolant, exhaust residue, air filters, overpressure, fuel system bleeding, and injectors. It also includes diagrams and descriptions of the cylinder head, seals, pistons, valves, crankshaft, lubrication system, injectors, turbocharger, and cooling system.
The document provides information on an engine used in a Loader L330C, including:
1. The engine is a 6-cylinder, direct-injection diesel with turbocharging and charge air cooling.
2. The cylinder bore is 144mm and stroke is 165mm, giving a displacement of 16.12 liters.
3. Specifications like output and torque curves are provided.
Volvo L330C Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides specifications and descriptions for a TD164KAE engine used in a Loader L330C. It is a 6-cylinder turbocharged diesel engine with a displacement of 16.12 liters. It produces 366 kW of power at 1800 rpm and 2330 Nm of torque at 1000 rpm. Each cylinder has its own cast iron cylinder head with replaceable guides and valves. There are four valves per cylinder. The injector is positioned vertically above the piston in a copper sleeve cooled by engine coolant.
Volvo L90COR L90C OR Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides service information for removing and installing an oil pump on L90C and L120C engines. It includes specifications, a list of required tools, step-by-step instructions for removing the old pump and installing the new one, torque specifications, and a note on checking for leaks after installation. Key steps include draining the oil, using a puller to remove the drive gear, bolting on the new pump, heating and tapping the drive gear onto the shaft, and filling the engine with new oil.
Volvo L90D Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides specifications and service information for engines, including:
- The L90D is equipped with a TD63KBE engine and the L120D with a TD73KDE engine.
- Both engines are 6-cylinder 4-stroke turbocharged diesel engines with intercoolers.
- The engines have wet cylinder liners and separate cylinder heads covering 3 cylinders each.
- Lubrication is provided by a force-feed system and the turbocharger supplies pressurized air.
Volvo L25B Compact Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
The document provides information on removing and installing a VOLVO diesel engine. It describes:
- Removing components like the air duct, fuel lines, hydraulic pump, and electrical connections.
- Suspending the engine from an overhead crane and removing it.
- Installing the engine by lowering it into place and reconnecting components in reverse order.
- Reattaching items like the fuel lines, electrical connections, air duct, and throttle cable.
Volvo L40B Compact Wheel Loader Service Repair Manual Instant Download.pdffijsekkkdmdm3e
This document provides information on adjusting the valves of engines equipped on certain machines. It describes using a rotation angle tool to adjust the valves, as the new valve spring design prevents the use of feeler gauges. The procedure involves rotating the engine to the valve overlap position on each cylinder, then adjusting the inlet valves to 90 degrees and exhaust valves to 150 degrees from the initial contact position using the rotation tool. Torque specifications and checks for leaks are also provided after adjustment.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Volvo EC240B FX EC240BFX Excavator Service Repair Manual Instant Download.pdf
1. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Go back to Index Page
Engine, description
The engine is a 6-cylinder, 4-stroke, direct injected, turbocharged, air to air aftercooled, water cooled assembly with a cast
iron block and cylinder head.
Figure 1
Engine, start motor side view
1.
2.
3.
4.
5.
6.
7.
8.
9.
Air conditioner compressor pulley
Engine oil pressure sensor port
Make up line
Coolant temperature sensor port
Water inlet
Lifting lug
Water outlet
Air inlet
Start motor
2. Figure 2
Engine, air heater side view
1.
2.
3.
4.
5.
Fuel return line
Air heater
Coolant preheater port
Coolant filter supply
Fuel suction line
Figure 3
Engine, top view
1.
2.
3.
4.
Water inlet
Return from heater
Engine oil filler
Supply to heater
3. 5.
6.
7.
8.
Oil dipstick
Air inlet
Water outlet
Exaust line
Figure 4
Engine, front view
1.
2.
3.
4.
Alternator
From charge air cooler
To charge air cooler
Oil drain valve
5. Service Information
Document Title: Function Group: Information Type: Date:
Engine, description 200 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Go back to Index Page
Engine, description
D7E -Tier 3 / Tier 3 base tier 2
The D7E configuration is a four stroke, straight six cylinder, turbocharged, direct injected diesel engine with charge air
cooling and wet, replaceable cylinder liners.
The D7E engine uses a Common Rail Fuel System controlled by the engine electronic control (E-ECU) software.
Electronically controlled IEGR (Internal Exhaust Gas Recirculation) reduces NO formation and lowers emissions without the
need for exhaust after treatment (Only applied Tier 3 engine)
Volvo's latest engine management system, EMS 2 is used to control all engine electronic functions.
The cylinders are numbered consecutively beginning at the flywheel end. Engine rotational direction is counterclockwise as
seen from the flywheel end.
Figure 1
Engine, D7E
6. Service Information
Document Title: Function Group: Information Type: Date:
Component locations 200 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Component locations
Component position, engine D7E. The following figures show the position of a number of components on engine D7E.
Figure 1
Component locations, front side
1 Engine oil filler 11 Engine oil cooler
2 Air inlet 12 Coolant heater port
3 Transport eye 13 Oil dipstick gauge
4 Alternator 14 Power take off
5 Fuel feed pump 15 Fuel filter
6 V-rib belt drive on crankshaft 16 Crankcase bleeding valve
7 V-rib belt 17 High pressure fuel pump
8 Automatic belt tensioner 18 Common rail
9 Engine oil filter 19 Injector
10 Coolant pump 20 Waste gate actuator
7. Figure 2
Component locations, flywheel side
21 Crankcase bleeding valve 28 Air outlet (to charge air cooler)
22 Flywheel housing 29 Coolant inlet
23 Starter motor 30 Coolant outlet
24 Oil pan 31 Air inlet (from charge air cooler)
25 Drain plug 32 Exhaust manifold
26 Oil return line from turbocharger 33 Cylinder rocker arm cover
27 Turbocharger
8. Service Information
Document Title: Function Group: Information Type: Date:
Engine characteristic curve 210 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Engine characteristic curve
Figure 1
Engine, characteristic curve
A be (g/kW/h) : Fuel consumption C rpm : Engine speed
B T (N m) : Torque D P (kW) : Power
9. Service Information
Document Title: Function Group: Information Type: Date:
Basic check, Engine 210 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Basic check, Engine
NOTE!
Certain tests and checks are performed with unlocked safety locking lever. Make sure that the machine cannot operate
unexpectedly when the safety locking lever is unlocked.
Purpose of the basic check
The purpose of the basic check is to provide fast and accurate information about the general condition of the engine.
The basic check should be performed and evaluated according to instructions in the PC-tool VCADS Pro.
Tests included in the basic check
The basic check which is divided into the following tests should be performed after reading out error codes and checking
parameters.
Tests:
1.
2.
3.
4.
Cylinder compression, test
The purpose of the test is to show if any cylinder has a deviating compression pressure. The test replaces the old
pressure check method but does not give any absolute values.
Cylinder balancing, test
The purpose of the test is to show if there is any deviation in the fuel injection to a cylinder.
Feed pressure, test
The purpose of the test is to check that the feed pressure is as per specification.
Sensor, test
The purpose of the test is to check the function of all sensors.
10. Service Information
Document Title: Function Group: Information Type: Date:
Troubleshooting 210 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Troubleshooting
General about troubleshooting
When a malfunction is suspected or has been confirmed, it is important to identify the cause as soon as possible.
The starting point for all troubleshooting is that there is some type of trouble symptom or malfunction.
Malfunctions can be indicated by:
generation of error codes
detection of a malfunction symptom.
Troubleshooting work
The first step in troubleshooting is to gather information from the operator concerning the malfunction symptoms, see
Electrical and information system, Collection of basic data. Then, attempt to pin-point the cause by checking in a certain
order, for more information, see Electrical and information system, troubleshooting strategy.
The different checking steps are:
Check error codes
Check parameters
Perform basic check
Troubleshooting information
The following is included in Electrical and information system and is used when troubleshooting:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Troubleshooting strategy
Describes troubleshooting work, step by step.
Troubleshooting, assistive devices
Brief summary of the assistive devices that are available for troubleshooting.
Functional checks and tests, VCADS Pro
Brief description of VCADS Pro. For a detailed description, see VCADS Pro User’s Manual.
Error code information
Contains information regarding error code design, lists of all error codes and error code information about each
error code.
Components, troubleshooting and specifications
Contains methods and measuring values for troubleshooting of components. Also includes wiring diagrams and
certain specifications.
Parameters
Incorrectly set parameters may cause malfunction symptoms. The parameter list includes all limit and command
values for parameters.
Control units, functional description
Describes the functions of the control units, inputs and outputs as well as communication between the various
control units.
Control units, active and passive measuring
Contains measuring values for active and passive measuring of the ECUs.
Software functions
Describes the pre-requisite conditions for the control and monitoring functions that are performed by the software
in the ECUs.
11. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head, description 211 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Cylinder head, description
The cylinder head is made of grey cast iron and is common for all cylinders. The induction air enters vertically (A) and the
exhausts leave horizontally (B). Inlets and exhaust outlets are located on the same side of the cylinder block. Inlet and
exhaust valve size is increased to optimize the gas exchange and combustion process. Valve guides are replaceable. Coolant
flow in the cylinder head is modified to accommodate an outlet controlled cooling system.
On order for the engine to fulfill governing emission standards, there are 3 cylinder head gaskets of different thicknesses
between the cylinder head and the piston.
Figure 1
12. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder head gasket,
description
211 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Cylinder head gasket, description
The cylinder head gasket is a multi layered gasket with 1, 2 or 3 identification holes to indicate three different thicknesses
available. Selection of the proper thickness of gasket is determined by the measurement of piston projection above the
cylinder block sealing surface. Recalibration for the correct gasket thickness would be required if new pistons or a new
cylinder block were installed.
Figure 1
1. Cylinder head gasket, marking
13. Service Information
Document Title: Function Group: Information Type: Date:
Cylinder liner, description 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Cylinder liner, description
The engine has a cylinder block with wet (replaceable) cylinder liners. The bottom part of the liner is sealed against the
cylinder block with two O-rings positioned in grooves machined into the lower end of the liner.
The upper part of the cylinder liner is sealed by the cylinder head gasket and the pressure created by the cylinder head
clamping force against liner protrusion.
Figure 1
Cylinder liner
14. Service Information
Document Title: Function Group: Information Type: Date:
Pistons, description 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Pistons, description
The pistons of the engine are made of special alloy aluminium.
The top of the piston has a combustion cavity and a flywheel symbol to indicate the correct piston orientation.
Piston cooling is by oil spray to the inside of the piston from nozzles located in the main bearing pedestals.
The pistons are provided with three piston rings, two compression rings and one oil control ring.
The first or top compression ring has a cast iron carrier. The cross-section area for the second compression ring is tapered.
The third ring is an oil ring with a bevelled edge.
When installing the piston rings, the marking TOP by the opening in the rings must be face up.
Figure 1
1.
2.
Flywheel symbol
Iron carrier
15. Service Information
Document Title: Function Group: Information Type: Date:
Piston rings, description 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Piston rings, description
Each piston is equipped with two compression rings and one oil ring. The uppermost compression ring is of the "Keystone"
type (dual trapezoid-formed cross section). Compressions rings should be placed with the text facing upwards.
The oil ring is equipped with two scraping edges, which are pressed against the cylinder wall using the spring tension in the
ring and an expander spring placed on the inside of the ring. The oil ring can be placed on either side but should be placed
with expander spring and oil ring openings 180° from one another.
Figure 1
16. Service Information
Document Title: Function Group: Information Type: Date:
Piston cooling 213 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Piston cooling
Figure 1
Piston cooling
The piston is cooled by spraying lube oil against the inside of the piston top.
The 2-hole piston cooling nozzles made of plastic are fitted in the main bearing pedestals.
17. Service Information
Document Title: Function Group: Information Type: Date:
Valves, description 214 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Valves, description
The engines are equipped with one inlet and one exhaust valve per cylinder.
At the upper end of the valve guide, there is an O-ring seal (A) against the valve spindle to prevent major oil consumption
and to reduce the amount of hydrocarbons in the exhausts.
The valves are rotated by the eccentric action of the rocker arms.
The new compressed tapered shape enables the valves to turn easily despite loading.
Rocker arm lubrication is part of the engine force-feed lubrication system. The oil is supplied via the tappets and push rods.
If the valve guides are replaced, they are obtained in another version (B) to facilitate installation.
Figure 1 shows a valve guide installed in production and figure 2 shows a replacement guide.
Figure 1
18. Service Information
Document Title: Function Group: Information Type: Date:
Internal Exhaust Gas
Recirculation (IEGR),
description
214 Service Information 2014/8/26
Profile:
EXC, EC240B FX [GB]
Internal Exhaust Gas Recirculation (IEGR), description
A system for IEGR (Internal Exhaust Gas Recirculation) is used as part of V-ACT (Volvo Advanced Combustion Technology).
On D6E and D7E this takes place by an IEGR-opening piston, controlled by the lubrication oil's system pressure, acting on
the exhaust rocker arm which enables a second opening of the exhaust valves. When activated, the secondary piston will
give a limited valve opening of the exhaust valves during the induction phase, which leads exhausts back into the cylinder.
Included components
IEGR-unit
The hydraulic mechanism is housed in two interconnected IEGR-units, located on the rocker arm holders. Lubrication oil is
routed from the cylinder head via the solenoid valve to the high-pressure channel in the IEGR-unit through a channel in one
of the rocker arm holders.
Figure 1
1. IEGR-unit
Solenoid valve
The solenoid valve is located in the cylinder head on the flywheel side and is activated by the EECU via the control system
EMS 2. When IEGR is not activated, the solenoid valve is closed and no oil flow is allowed into the IEGR-unit. At activation of
IEGR, the solenoid valve opens the channel from the engine's lubrication system to the IEGR-unit.
19. Figure 2
1. Solenoid valve
Control valve
The control valve is located in the IEGR-unit between the high-pressure circuit and low-pressure circuit. When the low-
pressure circuit is supplied from the lubrication oil system, the control valve is lifted and closes the high-pressure circuit. The
ball in the control valve enables filling of the high-pressure circuit when IEGR is activated.
The lubrication oil is drained through the control valve.
Figure 3
1. Control valve
Main piston
The main piston is acted on by the adjusting screw on the inlet valve's rocker arm, and affects the oil pressure in the IEGR-
unit's high-pressure channel. At the end of the IEGR-phase, a pressure of 100 bar is generated in the high-pressure circuit.
Figure 4
1. Main piston
Servo piston
The servo piston is activated by the hydraulic pressure from the main piston via a channel in the IEGR-unit when the IEGR-
function is active/on (solenoid valve in open position). Then the servo piston opens the exhaust valves via the rocker arm an
extra time during the induction stroke.
20. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
21. Figure 5
1. Servo piston
Function
IEGR is activated by the system being supplied with full lubrication oil system pressure via the solenoid valve. The solenoid
valve is activated by the E-ECU.
The control valve closes the high-pressure circuit and the ball inside the valve enables filling of the system.
With the same movement as the inlet valve's rocker arm opens the valve, the main piston is forced upward. The pressure in
the IEGR-unit's high-pressure channel (up to 100 bar) overcomes the spring force in the servo piston. the servo piston forces
down the rocker arm, which results in the exhaust valve being open for a short time at the end of the induction stroke.
Exhausts from the exhaust manifold are sucked into the cylinder by vacuum from the other cylinders.
The breather hole between the low-pressure channel and the high-pressure channel in the IEGR-unit enables longer exhaust
recirculation at high engine speed.
Figure 6
IEGR-system (inactive)
1.
2.
3.
4.
5.
6.
Servo piston
Control valve
Solenoid valve
2–5 Bar lubrication oil pressure
Breather hole
Oil channel, low-pressure