Siamo sicuri che è la tecnica e il budget l'unica arma per coinvolgere le persone a seguire e a condividere la tua pagina Facebook? Avere a cuore i clienti che ti seguono, ascoltando le loro critiche e i loro consigli e condividendo i loro sogni potrebbe migliorare il valore del tuo brand; probabilmente non aumenterai il numero di fan ma avrai molti di più ambassador del tuo marchio
The Pneus GINEO is a plant designed and built to process, via pyrolysis, granular material obtained from the treatment of End of Life Tires. “Pyrolysis” is a process which induces thermal degradation (depolymerisation) of organic compounds in presence of heat and absence of oxygen.
Therefore there is no combustion. Granular rubber, obtained from End of Life Tires, is introduced by a conveyor belt in the loading hopper that will transfer it in the pyrolysis reactor after a pre-heating step.
The reactor is equipped with a motorized mixer that ensures that the heating of the granular rubber, by electronically programmed inductors, is accurate.
The granular product, once introduced in the reactor with a variable temperature. Will generate gas and char. Following the process of pyrolysis, the char is continuously discharged from a reactor nozzle and transferred under forced cooling to dedicated containers
While the gas of pyrolysis is introduced in air cooled heat exchangers where the condensed liquid phases are collected The heat exchangers condensing the gas of pyrolysis are equipped with ambient air cooled fins and are built in sections to allow an optimized fractioned condensation.
The liquid phase, following its transfer into collecting tanks, will undergo a 12 micron filtration to remove suspended solid The condensed phase (organic oils of different composition in the various stages) is collected in settling tanks
While the remaining gaseous phase is introduced in a water filled tank to be washed before being sent to energy generators
The generator group is modified to accept, as fuel, both liquid and gaseous phase generated by the pyrolysis
The generators are equipped with a catalyst that enables the conformance to environmental emission limits
All the components of the Pneus Gineo equipment are fabricated with special stainless steels
The operation of the system is controlled via a programmed electronic device
The design, fabrication and operation of the plant are in conformance with the EU regulations
Pneus Gineo in azione
La nostra sfida è stata quella di realizzare un impianto per generare energia risolvendo un problema ambientale senza crearne uno ulteriore. Tutto questo, oggi, è una realtà e si chiama Pneus GINEO.
Pneus GINEO genera “carbone ed olio”, dalla trasformazione di pneumatici fuori uso, senza immettere ne fumi ne altro nell’ambiente “Pneus GINEO” e’ un impianto progettato e costruito per trattare granulo derivato dal Pneumatico Fuori Uso, materia prima seconda, con un trattamento di pirolisi. La pirolisi è un processo di decomposizione termochimica ottenuto mediante l’applicazione di calore e in completa assenza di ossigeno E’ pertanto privo di combustione.
Siamo sicuri che è la tecnica e il budget l'unica arma per coinvolgere le persone a seguire e a condividere la tua pagina Facebook? Avere a cuore i clienti che ti seguono, ascoltando le loro critiche e i loro consigli e condividendo i loro sogni potrebbe migliorare il valore del tuo brand; probabilmente non aumenterai il numero di fan ma avrai molti di più ambassador del tuo marchio
The Pneus GINEO is a plant designed and built to process, via pyrolysis, granular material obtained from the treatment of End of Life Tires. “Pyrolysis” is a process which induces thermal degradation (depolymerisation) of organic compounds in presence of heat and absence of oxygen.
Therefore there is no combustion. Granular rubber, obtained from End of Life Tires, is introduced by a conveyor belt in the loading hopper that will transfer it in the pyrolysis reactor after a pre-heating step.
The reactor is equipped with a motorized mixer that ensures that the heating of the granular rubber, by electronically programmed inductors, is accurate.
The granular product, once introduced in the reactor with a variable temperature. Will generate gas and char. Following the process of pyrolysis, the char is continuously discharged from a reactor nozzle and transferred under forced cooling to dedicated containers
While the gas of pyrolysis is introduced in air cooled heat exchangers where the condensed liquid phases are collected The heat exchangers condensing the gas of pyrolysis are equipped with ambient air cooled fins and are built in sections to allow an optimized fractioned condensation.
The liquid phase, following its transfer into collecting tanks, will undergo a 12 micron filtration to remove suspended solid The condensed phase (organic oils of different composition in the various stages) is collected in settling tanks
While the remaining gaseous phase is introduced in a water filled tank to be washed before being sent to energy generators
The generator group is modified to accept, as fuel, both liquid and gaseous phase generated by the pyrolysis
The generators are equipped with a catalyst that enables the conformance to environmental emission limits
All the components of the Pneus Gineo equipment are fabricated with special stainless steels
The operation of the system is controlled via a programmed electronic device
The design, fabrication and operation of the plant are in conformance with the EU regulations
Pneus Gineo in azione
La nostra sfida è stata quella di realizzare un impianto per generare energia risolvendo un problema ambientale senza crearne uno ulteriore. Tutto questo, oggi, è una realtà e si chiama Pneus GINEO.
Pneus GINEO genera “carbone ed olio”, dalla trasformazione di pneumatici fuori uso, senza immettere ne fumi ne altro nell’ambiente “Pneus GINEO” e’ un impianto progettato e costruito per trattare granulo derivato dal Pneumatico Fuori Uso, materia prima seconda, con un trattamento di pirolisi. La pirolisi è un processo di decomposizione termochimica ottenuto mediante l’applicazione di calore e in completa assenza di ossigeno E’ pertanto privo di combustione.