Vellis catalogue

VELLIS
CHEMICALS

PRODUCT
CATALOGUE

CH.VELLIS & Co EE.
Neohorouda , P.O.Box 339 – 57008 Thessaloniki, GREECE
Tel.: +30 2310 788240 Fax: +30 2310 787199
E-mail: chvellis@vellischem.gr
Products Web: www.vellischem.gr

POLYMER ALKYD PIGMENTS ADDITIVES OTHER
DISPERSIONS RESINS PRODUCTS
Cellulose
Iron Oxide
Copolymer Thickeners
Long Oil Fillers
Dispersions Alkyd Resins Chrome P.U. Thickeners
Yellow-Green
Yellow- Colouring
Wood & Defoamers Pastes
Medium Oil Molybdate
Paper Glues Orange Dispersing-
Dispersing- Water
Alkyd Resins
Wetting agents Repellent
Titanium
Styrene-Acrylic
Styrene- Dioxide
Dispersions Short Oil Preservatives
Roof Coating
Alkyd Resins Ultramarine Solvent &
Blue - Violet Coalescing agents
Pure acrylic Water isolation
dispersions Acrylic Resins Anticorrosive coating
Driers
Pigments
Anti skinning Concrete
Metallic Anti floating Plasticizers
Concrete Polymers
pH stabilizers
Carbon Black

Additives

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199
Web: www.vellischem.gr

Copolymer Dispersions
Solids
PRODUCT content
Viscosity MFFT Uses

High quality wall paints for indoor and
Polymer 7215 50±1 % 4.000 cPoise (25°C) 3°C
outdoor applications
Vinyl Acetate-Acrylic Acid Ester
3.000-7.000 cPoise
Polymer VA 50 50±1 % 12°C Copolymer, plasticizer-free for indoor and
(25°C)
outdoor water-based paints.
Vinyl Acrylic Copolymer for indoor/
3.000-7.000 cPoise
Polymer VA 51 58±1 % 12°C outdoor paints, texture coatings and
(25°C)
building adhesives

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Wood & Paper Glues

Solids
PRODUCT content
Viscosity MFFT Uses

40.000 – 60.000 Adhesive for wood and furniture with
VePOL B 22 N 42 ±1 % + 2 °C
cPoise (20°C) superior quality.

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Styrene Acrylic Dispersions
Solids
PRODUCT content
Viscosity MFFT Uses

VePOL SA 21N Styrene Acrylic Binder paints,
5.000-10.000
50±1 % + 17°C architectural coatings and natural stone
mPa-s (25°C)
plaster. Plasticizer free.
Suitable for flexible coatings, excellent
10.000-20.000
VePOL SA 31N 50±1 % 0°C compatibility with fillers and pigments.
mPa-s (25°C)
Plasticizer free
Plastisizer – free dispersion of an acrylic-
VePOL SA 1000-2000 styrene copolymer for flexible mortar
57±1 % - 3 °C
400NL mPa-s (25°C) and cement slurries with good wetting
properties

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Pure Acrylic Dispersions

Solids Viscosity
PRODUCT content
MFFT Uses
(25 0C)

VePOL ACP < 400 mPas Pure acrylate dıspersıon recommended
602 60 ± 1 % 7 ± 1 °C for exterıor-ınterıor paınts and
(spindle:2/20 rpm) pıgmented stuccos

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Concrete Polymers

Solids
PRODUCT content
Viscosity MFFT Uses

POLYPLAST High quality polymer for admixture with
47,5±1 % 30 mPa-s (25°C) 3°C
SB cement and other hydraulic binders

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Long Oil Alkyd Resins
Type of oil Viscosity
or F.A. Solids
ALKYD Solvent
content Gardner – Holdt (23°C) Uses
(Length) Delivery Form
Air drying decorative paints and
65-60 SW Soya (65%) White Spirit 60±1% Y – Z2
industrial enamels
65-60 SW LV Soya (65%) White Spirit 60±1% X–Y
industrial enamels
65-70 SW Soya (65%) White Spirit 70±1% Z6 – Z8
industrial enamels
65-70 SW LV Soya (65%) White Spirit 70±1% Z3 – Z6
industrial enamels
68-75 SNW Sunflower (68%) White Spirit 75±1% Z – Z2
industrial enamels

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Medium Oil Alkyd Resins
Viscosity
Type of oil or F.A. Solids
ALKYD (Length)
Solvent
content
Gardner – Holdt (23°C) Uses
Delivery Form
High quality industrial
White Spirit
48-55 TTW Linoleic rich FA (48%) 55±1% Z3 – Z5 enamels - car repair
Xylene
finishes

50-60 SBT Soya (50%) Toluene 60±1% Z1 – Z3 Traffic paints

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Short Oil Alkyd Resins
Type of oil Viscosity
or F.A. Solids
ALKYD Solvent
content
Gardner – Holdt (23°C) Uses
(Length) Delivery Form
Fast drying corrosion resistance
32-60 STX TOFA (32%) Xylene 60±1% Z3 – Z4
primers

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Acrylic Resins
Solids Viscosity
ACRYLIC Solvent
content
Uses
Gardner-Holdt

BMTA 60-5 Toluene 60±1 % Z1 – Z4 Traffic paint varnishes

ESW 60-20 White spirit 60±1 % W–Z Low viscosity primers

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Iron Oxide
IROX®
Fe2O3 Oil absorption Residue on Water soluble pH
IROX (%)
moisture
(ml / 100g) 325 mesh (%) Salts (%) value
Red 730A 96 15-25 0.1 max 0.3 max 3.5 – 7 1.0 max
Red 701 96 15-25 0.3 max 0.3 max 3.5 – 7 1.5 max
Yellow 713 86 25-35 0.3 max 0.3 max 3.5 – 7 1.0 max

Black 718 93 15-25 0.5 max 1.0 max 5–8 1.5 max

Orange 960 88 25-35 0.3 max 0.3 max 3–7 1.5 max

D.Brown 663 91 20-30 0.4 max 0.5 max 4–7 1.5 max
L.Brown 610 90 25-35 0.3 max 0.5 max 4 –7 1.5 max

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Granule Iron Oxide
IROX
Oil absorption Residue on Water soluble pH Average
Fe2O3
IROX (%)
granule
(ml / 100g) 325 mesh (%) matter (%) value size
Red 730 G 93 15-25 0,3 max. 1,5 max. 5-8 0,8 mm
Yellow 713 G 85 25-35 0,3 max. 1,5 max. 5-8 0,5 mm

Black 718 G 88 15-25 0,3 max. 1,5 max. 6-9 0,8 mm

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Chrome Yellow - Green
Oil Specific
CHROME C.P.V.C Tinting strength Light
absorption Gravity
YELLOW (g pigment/100g TiO2 ) fastness
(g / 100g) (g / cm3)
AD 74 17 5.3 51 39.1 7
AD 81 20 5.3 47 43.1 7

CHROME
GREEN
134-ML-62 18 4 56 50.7 6–7

151-MR-70 18 3.9 57 46.5 7

GX 15 – 25 5.10 95 – 105 7

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Molybdate Orange

Moisture & Soluble Tinting strength Residue on
volatiles at 105 salts with respect to 45microns
PRODUCT 0C
% standard mesh
% %) %
RED NR 35 0.50 0.90 104.0 0.20

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Titanium Dioxide
Oil Average
pH value Specific Gravity TiO2
PRODUCT absorption particle size2
(g / cm3 ) Content % (µm)
(g / 100 g)
Tronox 828 19 7,5 4.1 Min. 95 0,19

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Ultramarine
Blue & Violet
Soluble
salts Sieve Residue
Moisture Tinting strength Free Sulfur
PRODUCT on 44 m
% % %) %
%

Blue A - 31 1.0 1.0 95 – 105 0 – 0.2 0.10
Violet V – 2 1.30 0.80 95 – 105 0.10 0.10

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Anticorrosive Pigments
Moisture & Residue on
Specific Oil Ph
volatile 44 m
PRODUCT gravity CPVC absorption Of aqueous
matter mesh
(g / cm3) (g / 100g) Extract
% %

Hispafos 3,3
3,3 58 20 6,2 0.5
(Zinc Phosphate) At 105 0C

Actirox
( Zinc Phosphate 7,3
+Zinc Molybdate At 105 0C 3,0 39 47 7,5 0,2
+ organophilic
treatment)

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Metallic
Bulk Passing
D 10 D 50 D 90
Metallic Density 160µm
µm µm µm
Kg/l %
Aluminium
Powder 0.1 – 0.3 99.8 - 100 Appr.3 Appr.10 Appr.26
Ultralumin
Bronze L900
1.1 – 1.3 99 – 100 13 – 17 32 – 38 56 – 66
Pale Gold
Copper powder
1.1 – 1.3 99 - 100 16 – 20 40 – 46 72 – 82
L900

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Carbon Black
Density Carbon
PRODUCT (g / cm3) pH value Content General
at 20 0C %
Corasol C30 1.4 – 1.8 4–8 85 Good wettability, ,high tinting strength
Insoluble in water, carbon black in a very thin
Printex V 1.7 – 1.9 7 >91
dispersion

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Cellulose Thickeners
Viscosity Loss on Residue on
PRODUCT mPas Drying pH ignition Contents
(2% solution) Wt% %

TYLOSE 4000 3800-5300 10% 7 n.a. NaCl 1,5% max, active substance 88,5%

TYLOSE 10000 8000-12000 10% 7 n.a. NaCl 1,5% max, active substance 88,5%
Not
CELLOSIZE 4400 4800-6000 n.a. 6-7 Hydroxyethyl Cellulose 85,8%
determined
1100-1500 Not
CELLOSIZE 15000 n.a. 6-7 Hydroxyethyl Cellulose 85,8%
(1% solution) determined

VeCEL 5.000s 4500 – 6000 5,0 max 4,0 – 8,0 3,0 max With a little glyoxal

VeCEL 15.000s 13000-16500 5,0 max 5,5 – 8,0 1,0 max With a little glyoxal

VeCEL 20000s 17000-22000 6,0 max 6,0 – 8,5 3,0 max With a little glyoxal



CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

P.U. Thickeners
Viscosity Density Solids Content
PRODUCT mPas (20 0C) (2g, 3h, 105 0C) General information
(23 0C)
50% aqueous Yellowish, non-ionic,
Borchigel WN 50 S 5000 – 9000 1,07 g/ cm3
solution translucent
Refraction: 1415 (at 20 0C)
46 % aqueous
Borchigel LW 44 5000 – 9000 1,06 g/cm3 Free of solvent, yellowish,
solution
translucent

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Defoamers
Density Flash Point
PRODUCT (0C)
General information
(25 0C)
Non-ionic,off-white/opaque liquid,
FM 834 0,88-0,92 g/ cm3 140
emulsifiable, for emulsion paints
Self-emulsifiable liquid, ideal for water
Foammast 83 0,93 g/cm3 140
paints.

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Dispersing – Wetting agents
pH
PRODUCT Composition / General information
%
Natrium salt of a polycarboxylic polymer, for use as an
efficient pigment dispersant in high pvc pigment
DISP. LAT 7–9
formulations such as emulsıon based prımers, puttıes and
coatıngs

SODIUM Mixture of polyphosphates, white powder, insoluble in
6,6
HEXAMETAPHOSPATE water (0,1% max)

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Preservatives
Density
Stability
PRODUCT pH g / cm3 Solubility Uses
range
(20 0C)
For the protection of aqueous
Miscible with H2O
PRES 6 Neutral 1,06 pH 2,5 – 9,0 coatings,polymer dispersionsoil
and lower alcohols
emulsions,detergents,polishes

For the protection of aqueous
Miscible with H2O
PRES 7 ~ 5,4 1,02 pH 2,5 – 9,0 coatings,polymer dispersionsoil
and lower alcohols
emulsions,detergents,polishes

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Solvent & Coalescing agents

Boiling
Density Refractiv Moisture Purity Acidity
PRODUCT Point e Index
(20 0C) % % %
( 0C)
(20 0C)
Max. 0,2
COAL KE 0.947 g /l 254 1,4423 Max 0,2 Min. 99,0
As Iso-butyric aldehyde
Propylenglycol 2,6 188,2 - - -
Turpentine 0,87 150-175 - - -

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Driers
Density Metal
PRODUCT (20 0C) Viscosity content Composition
Kg / m3 %
1,0 mPas Mixture of metal soaps in white spirit. Lead
CVL SIL 413 920 – 960 6,4 – 6,8
(25 0C) free drier combination
Basic Calcium salt of a saturated branched C8
Calcium Octate 5% 880 – 890 Max 10 cSt 10 ± 0.2
– C10 synthetic fatty acid solution in D6
24 ± 0.5 Basic Calcium salt of a saturated branched C8
Calcium Octate 10% 1000 Max 100 cSt
– C10 synthetic fatty acid solution in D6
Max 300 mPas 5 ± 0.2 Lead salt of a saturated branched C8 synthetic
Lead Octate 24% 1050 – 1100
(20 0C) fatty acid solution in white spirit
Max 400 mPas 30 ± 0.5 Lead salt of a saturated branched C8 synthetic
Lead Octate 30% 1200 – 1250
(20 0C) fatty acid solution in white spirit
Max 300 mPas 10 ± 0.2 Cobalt salt of a saturated branched C8
Cobalt 10% 980
(20 0C) synthetic fatty acid solution in white spirit

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Anti skinning -
Anti floating
Density Active
Flash
substance
PRODUCT (20 0C) Point General information
content
g / m3 ( 0C)
%
Methyl ethyl ketoxime.
ASK M2 0,926 ±0,010 61 100
Use: for paints drying by oxidation
Dispersant and grinding aid, for coatings,
DISP. 970 0,89 – 0,91 68-72 44 – 48
paints, printing inks. Gelling aid

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Fillers
Oil Solubility Loss on Brightness
Density pH
PRODUCT absorption in water ignition FMY/C Other information
(20 0C) value
(g/100g) % (1000 0C) %
filler in dispersion
AL. SILICATE paints for partial
250 kg/m3 10 200 insoluble 8% 97
P820 replacement of
titanium dioxide.
Special filler with
TALK M15 490 kg/ m3 9 43 0,1 5,6% 84 very good hydrophilic
properties
Special filler with
TALK M20 350 kg/ m3 9 40 0,1 5,4% 86 very good hydrophilic
properties

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Colouring Pastes
Color Fastness to Specific Pigment Colour Chemical
PRODUCT Ind.
Lightfastness
weathering Conc. strength resistance
gravity
1/25 st.
1/200 1/200 Acid
1/3 st. 1/25 st. 1/3 st. 1/25 st. depth
st. st. (%)
depth depth depth depth (g/100gr Alkali
depth depth
TiO2)

Yellow 5
Anconyl AC 1 3 7 6-7 6 4-5 4 3-4 1.2 40 0.718
5
Yellow 5
Anconyl AC 2 74 7 6-7 7 3-4 3 2 1.14 40 0.351
4-5
5
Anconyl AC 6 Red 112 7 6-7 6 3-4 2-3 2 1.08 42 0.479
4
5
Anconyl AC 7 Blue 15 7-8 7-8 7-8 4-5 4-5 4-5 1.22 40 0.256
5
Anconyl AC 10 Black 7 8 8 8 n.a. n.a. n.a. 1.15 40 n.a. GOOD

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Water repellent
Special
Solids pH Density
PRODUCT weight Uses
content value g/cm3
At 20 0C

12% In the brick industry and the
CHEM SIL 10 6–8 1,01 1,25 prevention of efflorescence on brick
By weight products

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Roof Coating ®
PRODUCT
Properties Uses
Shades
Ceramic Red Based on fine dispersed aqueous dispersion Coatings for cement roof tiles
Grey of acrylic resins with pigment of very high
Yellow strength in sun light and weathering resistance
Green Low water absorption. Quick drying
Brown No tacking effect
Black
Blue

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Water-Isolation Coating
Viscosity
Specific Brookfield RV
PRODUCT pH value
gravity at T=220 C,
Uses

sp R4 rpm20

1,15 gr/ml Thick, elastomer, aqueous
5000 – 10000
H.S POLYMER 8–9 emulsion ideal for sealing
At 20 0C cP walls, rooftops, basements.

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Concrete Plasticizers
Density
PRODUCT pH value Uses
g/cm3
FLU TEC N585L 7 – 10 1,20 ± 0,01 Liquid Superplasticizer or water
reducer in all kind of building
FLU TEC S585L 11 ± 1 1,20 ± 0,02 materials and increase the resistance of the
cement product
Powder that enjoys high temperature resistance
FLU TEC P 10 – 11 0,8 – 1,2 and stability, increases the staining force.
Elevates manufacturing efficiency

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

pH Stabilizers

Freezing
PRODUCT pH value
point
Appearance Uses

Transparent, Liquid that can substitute
ALK 2000 12 - 3 0C
odourless ammonia

Transparent, Liquid that can substitute
AMP – 95 11,3 - 2 0C
odourless ammonia

CH.VELLIS & Co EE.
Tel.: +30 2310 788240 Fax: +30 2310 787199

Additives
Dry particle
Specific size
PRODUCT gravity
Appearance Uses
(200 mesh)

Rheology modifier, organically
modified bentonite clay for gelling
light cream finely
Claytone 40 1,5 – 1,7 95% efficiency in numerous hydrophobic
divided powder
systems (enamels, primers, epoxy
systems etc)

Vellis catalogue

Recommended

Recommended

More Related Content

Featured

Featured (20)

Vellis catalogue