Vehicle gas detection with automatic safety warning system using gsm
•Download as DOC, PDF•
0 likes•311 views
The document describes a vehicle gas detection system with an automatic safety warning system using GSM. The system uses a CO sensor to measure carbon monoxide levels inside a vehicle. If CO levels exceed a threshold, the system sends an alert via GSM to local authorities with details about the vehicle and CO levels. It also automatically locks the vehicle. The system is intended to detect dangerous gas buildup and notify emergency responders if occupants are unconscious from high CO exposure.
Report
Share
Report
Share
Recommended
Gps vehicle tracking
This project describes on how to provide security to vehicles using GPS. A remote tracking server and real time vehicular tracking system were installed in the vehicle for easy tracking of vehicle. Information about the vehicle will transfer to actual tracking server by making use of GSM\GPRS modem on GSM network by sending a SMS or transfer the data to tracking server via GPRS using direct TCP\IP connection. Tracking server also has GSM/GPRS modem which receives vehicle information through GSM network and placed the same information in a database. This vehicle security system, which installed in the car helps to reduce the auto theft.
1 (1)
This document describes an automatic power meter reading system that uses GSM technology. The system aims to remotely monitor and record power usage readings by sending SMS messages from a GSM-enabled digital power meter to mobile phones. This allows electricity usage to be automatically tracked and billed without the need for manual meter readings, helping reduce errors and inconvenience. A prototype was developed to demonstrate how GSM networks can effectively enable automatic meter reading, billing and usage notifications.
Arduino based lpg gas monitoring & automatic cylinder booking with alert ...
This document proposes an Arduino-based system to automatically monitor LPG gas levels in cylinders and book a replacement when the gas reaches a minimum threshold. The system uses a weight sensor to continuously measure the cylinder weight and sends an SMS alert to the gas supplier when a refill is needed. It also monitors for gas leaks and alerts the user to prevent accidents. The goal is to make the LPG cylinder refill process fully automated without human intervention for a more convenient experience, especially for illiterate users or those with busy schedules. Additionally, the system aims to enhance safety by detecting any issues with the gas supply.
Automatic speed and torque monitoring in induction motors using zigbee and sms
This project monitors the speed and torque of induction motors in real time using a ZigBee wireless sensor network. An embedded system noninvasively acquires electrical signals from motors to locally estimate speed and torque. It then transmits these values over the ZigBee network to a monitoring unit. The system allows real-time monitoring of multiple motors and provides advantages like low cost, security, reliability, and throughput compared to alternative technologies. Simulations show plots of voltage, current, speed, and torque for different applied load values.
Automatic speed and torque monitoring in induction motors using zigbee and sms
This project monitors the speed and torque of induction motors in real time using a ZigBee wireless sensor network. An embedded system noninvasively acquires electrical signals from motors to locally estimate speed and torque. It then transmits these values over the ZigBee network to a monitoring unit. The system allows real-time monitoring of multiple motors and provides advantages like low cost, security, reliability, and throughput compared to alternative technologies. Simulations show plots of voltage, current, speed, and torque for different applied load values.
Vampire attacks draining life from wireless ad hoc sensor networks
This document summarizes a paper that explores "Vampire attacks" which drain the battery power of wireless sensor networks. The paper finds that many popular routing protocols are susceptible to these attacks, which are difficult to detect and can increase overall network energy usage significantly. It proposes methods to mitigate Vampire attacks, including a new routing protocol that provably limits the damage caused during packet forwarding.
Voice operated home appliance control
This document describes a voice operated home appliance control system. The system uses a programmable speech recognition circuit that can be trained to recognize specific words or phrases in order to control electrical devices and appliances. A microcontroller interfaces with the speech recognition board and relays to control appliances based on voice commands. An LCD display provides status updates. The system is powered by a 5V regulated supply sourced from a step-down transformer.
Ultrasonic sensor based automatic braking comfort
This document discusses an ultrasonic sensor-based automatic braking system that aims to avoid vehicle collisions. The system uses an ultrasonic sensor to detect objects in front of a vehicle and sends a signal to a microcontroller unit. The microcontroller then signals the braking unit to automatically apply the brakes based on a braking logic fed into the microcontroller, with the goal of avoiding collisions during vehicle operation. A block diagram outlines the key components, including ultrasonic sensors, a microcontroller, braking actuators, and an electronic control module.
Recommended
Gps vehicle tracking
This project describes on how to provide security to vehicles using GPS. A remote tracking server and real time vehicular tracking system were installed in the vehicle for easy tracking of vehicle. Information about the vehicle will transfer to actual tracking server by making use of GSM\GPRS modem on GSM network by sending a SMS or transfer the data to tracking server via GPRS using direct TCP\IP connection. Tracking server also has GSM/GPRS modem which receives vehicle information through GSM network and placed the same information in a database. This vehicle security system, which installed in the car helps to reduce the auto theft.
1 (1)
This document describes an automatic power meter reading system that uses GSM technology. The system aims to remotely monitor and record power usage readings by sending SMS messages from a GSM-enabled digital power meter to mobile phones. This allows electricity usage to be automatically tracked and billed without the need for manual meter readings, helping reduce errors and inconvenience. A prototype was developed to demonstrate how GSM networks can effectively enable automatic meter reading, billing and usage notifications.
Arduino based lpg gas monitoring & automatic cylinder booking with alert ...
This document proposes an Arduino-based system to automatically monitor LPG gas levels in cylinders and book a replacement when the gas reaches a minimum threshold. The system uses a weight sensor to continuously measure the cylinder weight and sends an SMS alert to the gas supplier when a refill is needed. It also monitors for gas leaks and alerts the user to prevent accidents. The goal is to make the LPG cylinder refill process fully automated without human intervention for a more convenient experience, especially for illiterate users or those with busy schedules. Additionally, the system aims to enhance safety by detecting any issues with the gas supply.
Automatic speed and torque monitoring in induction motors using zigbee and sms
This project monitors the speed and torque of induction motors in real time using a ZigBee wireless sensor network. An embedded system noninvasively acquires electrical signals from motors to locally estimate speed and torque. It then transmits these values over the ZigBee network to a monitoring unit. The system allows real-time monitoring of multiple motors and provides advantages like low cost, security, reliability, and throughput compared to alternative technologies. Simulations show plots of voltage, current, speed, and torque for different applied load values.
Automatic speed and torque monitoring in induction motors using zigbee and sms
This project monitors the speed and torque of induction motors in real time using a ZigBee wireless sensor network. An embedded system noninvasively acquires electrical signals from motors to locally estimate speed and torque. It then transmits these values over the ZigBee network to a monitoring unit. The system allows real-time monitoring of multiple motors and provides advantages like low cost, security, reliability, and throughput compared to alternative technologies. Simulations show plots of voltage, current, speed, and torque for different applied load values.
Vampire attacks draining life from wireless ad hoc sensor networks
This document summarizes a paper that explores "Vampire attacks" which drain the battery power of wireless sensor networks. The paper finds that many popular routing protocols are susceptible to these attacks, which are difficult to detect and can increase overall network energy usage significantly. It proposes methods to mitigate Vampire attacks, including a new routing protocol that provably limits the damage caused during packet forwarding.
Voice operated home appliance control
This document describes a voice operated home appliance control system. The system uses a programmable speech recognition circuit that can be trained to recognize specific words or phrases in order to control electrical devices and appliances. A microcontroller interfaces with the speech recognition board and relays to control appliances based on voice commands. An LCD display provides status updates. The system is powered by a 5V regulated supply sourced from a step-down transformer.
Ultrasonic sensor based automatic braking comfort
This document discusses an ultrasonic sensor-based automatic braking system that aims to avoid vehicle collisions. The system uses an ultrasonic sensor to detect objects in front of a vehicle and sends a signal to a microcontroller unit. The microcontroller then signals the braking unit to automatically apply the brakes based on a braking logic fed into the microcontroller, with the goal of avoiding collisions during vehicle operation. A block diagram outlines the key components, including ultrasonic sensors, a microcontroller, braking actuators, and an electronic control module.
Wireless access control system based on ieee 802.15.4
This document describes a wireless access control system that uses ZigBee and image processing to control a door lock in a smart home environment. The system includes a ZigBee-enabled door lock module that was designed and developed. The paper also analyzes image transfer over the ZigBee network for different image sizes and discusses challenges involved in the face recognition module.
Towards the implementation of iot for environmental condition monitoring in h...
The document proposes an Internet of Things system using low-cost sensors to monitor domestic environmental conditions like temperature and humidity. It describes the integrated network architecture that connects smart sensors to measure parameters and transmit the data via the internet. The system uses machine learning to provide self-control of the monitoring devices and was found to reliably transmit sensor information 97% of the time based on prototype testing.
Zigbee and atmega32 based wireless digital control and monitoring system for ...
This document presents a wireless embedded control system using Zigbee and ATmega32 that can be used to switch on/off indoor and outdoor LED lights and reduce light intensity to effectively reduce power consumption. This improves the energy efficiency of lighting systems while providing sophisticated control over energy usage.
Toward privacy preserving and collusion resistance in a location proof updati...
Ecway Technologies provides IEEE projects and software developments with offices in multiple cities in Tamil Nadu, India. They can be contacted by phone or through their website.
The document describes a proposed system called APPLAUS for privacy-preserving and collusion-resistant location proof updating. It allows colocated Bluetooth devices to mutually generate location proofs to send to a location proof server, while using periodically changed pseudonyms to protect users' location privacy from each other and the server. The system also aims to detect colluding attacks through betweenness ranking and correlation clustering approaches. Experimental results show APPLAUS can effectively provide location proofs while preserving privacy and detecting collusion.
Topology abstraction service for ip vp ns
Ecway Technologies provides IEEE projects, software developments, and VPN services from its offices in Chennai, Trichy, Karur, Erode, Madurai, Salem, and Coimbatore, India.
This research proposes a topology abstraction (TA) service to enable VPN service providers to share core topology information with VPN customers in a scalable way. The TA service provides visibility into the state of the provider's network to improve VPN performance. Key challenges include generating accurate and fair TAs for each VPN. The paper develops three decentralized TA generation schemes and validates their performance through simulations over various topologies.
Voice operated remote for tv
A voice-activated remote control unit allows users to control TVs, DVD players, stereos, air conditioners, and other devices through spoken commands. The remote picks up a user's voice through input means, converts it to a digital signal, and uses voice recognition to identify commands in a database of predefined voice commands linked to control codes. It then emits the corresponding infrared signal to operate the targeted device.
On centralized and localized approximation algorithms for interference aware ...
This document discusses approximation algorithms for interference-aware broadcast scheduling in wireless sensor networks. It proposes both centralized and localized approximation algorithms for broadcast scheduling in 2D and 3D sensor networks. The algorithms account for sensors having different transmission ranges and interference ranges that are larger than transmission ranges. The centralized algorithms run in O(1) time while the localized algorithms allow for distributed implementation in 2D and 3D networks. Analysis and experiments evaluate the performance of the proposed algorithms.
Wireless sensor network for multi storey building design and implementation
Wireless sensor networks are a potential solution for home automation due to their reliability, low cost and low power usage. This paper describes the design and implementation of a wireless sensor network to control and monitor systems in a multi-storey building. The network was developed using Microchip ZigBee and installed in a building at the International University to evaluate its performance in a multi-storey environment.
Vehicles tracking and braking system in traffic
The document describes a vehicle tracking and braking system to help control traffic problems in cities with large populations and inadequate infrastructure. The system uses transmitters placed at zone entry and exit points to send the maximum speed limit for that zone to a receiver in each vehicle. A microcontroller in the vehicle then compares the actual speed to the limit and automatically regulates the vehicle's speed by varying the duty cycle of the pulse input to the motor driver. The entire system is low-cost, small in size, and can be easily installed on existing vehicles without major modifications to help enforce traffic rules and improve road safety.
Toward a statistical framework for source anonymity in sensor networks
This document presents a new statistical framework for modeling and evaluating source anonymity in sensor networks. It introduces the concept of "interval indistinguishability" to quantitatively measure anonymity. It models source anonymity as a problem of binary hypothesis testing with nuisance parameters. This transforms the problem of exposing private source information into searching for a data transformation that removes nuisance information. It discusses how existing solutions can be modified using this framework to improve anonymity.
Unterminated small signal behavioral model of dc–dc converters
The document discusses a new technique for obtaining unterminated small-signal behavioral models of DC-DC converters without removing them from their original environment. It allows the converter under test to remain working at a particular operating point while connected to any source and load. The technique measures the terminated frequency response and then uses a linear transformation matrix to decouple the source and load dynamics, obtaining the unterminated model. The paper presents verification and validation of the proposed characterization procedure.
Triple loop modulation (tlm) for high reliability and efficiency in a power f...
The document proposes a triple loop modulation (TLM) technique for power factor correction (PFC) systems that improves reliability and efficiency. TLM can automatically adjust bandwidth to rapidly increase or decrease inductor current, shortening transient response time. This improves reliability when dealing with output load variations. Testing showed the TLM technique achieved a high power factor of 99%, efficiency of 95%, and power capability of 90W, with transient response improved twofold over conventional PFC designs.
Tongue motion controlled wheel chair
The document describes a tongue-operated wheelchair control system called the Tongue Drive system (TDS). TDS uses small magnets attached to the tongue and hall effect sensors in a headset to detect and classify voluntary tongue motions, which are then used to control a powered wheelchair. The system consists of hall effect sensors that detect the magnet's position, a microcontroller that collects the sensor data and determines the appropriate direction to move the motors based on an intelligent embedded C program. This allows people with severe disabilities to effectively control a wheelchair through tongue motions.
Towards the implementation of io t for environmental condition monitoring in ...
The document discusses implementing an Internet of Things (IoT) system for environmental condition monitoring in homes using low-cost ubiquitous sensing. It proposes a system that uses smart sensors to reliably measure parameters like temperature and transmit the data via the internet. The system provides a self-control mechanism to optimize device operations during monitoring. Test results showed the integrated network architecture reliably transmitted sensing information 97% of the time. The system was able to generate real-time graphical information for remote home monitoring and management.
More Related Content
Viewers also liked
Wireless access control system based on ieee 802.15.4
This document describes a wireless access control system that uses ZigBee and image processing to control a door lock in a smart home environment. The system includes a ZigBee-enabled door lock module that was designed and developed. The paper also analyzes image transfer over the ZigBee network for different image sizes and discusses challenges involved in the face recognition module.
Towards the implementation of iot for environmental condition monitoring in h...
The document proposes an Internet of Things system using low-cost sensors to monitor domestic environmental conditions like temperature and humidity. It describes the integrated network architecture that connects smart sensors to measure parameters and transmit the data via the internet. The system uses machine learning to provide self-control of the monitoring devices and was found to reliably transmit sensor information 97% of the time based on prototype testing.
Zigbee and atmega32 based wireless digital control and monitoring system for ...
This document presents a wireless embedded control system using Zigbee and ATmega32 that can be used to switch on/off indoor and outdoor LED lights and reduce light intensity to effectively reduce power consumption. This improves the energy efficiency of lighting systems while providing sophisticated control over energy usage.
Toward privacy preserving and collusion resistance in a location proof updati...
Ecway Technologies provides IEEE projects and software developments with offices in multiple cities in Tamil Nadu, India. They can be contacted by phone or through their website.
The document describes a proposed system called APPLAUS for privacy-preserving and collusion-resistant location proof updating. It allows colocated Bluetooth devices to mutually generate location proofs to send to a location proof server, while using periodically changed pseudonyms to protect users' location privacy from each other and the server. The system also aims to detect colluding attacks through betweenness ranking and correlation clustering approaches. Experimental results show APPLAUS can effectively provide location proofs while preserving privacy and detecting collusion.
Topology abstraction service for ip vp ns
Ecway Technologies provides IEEE projects, software developments, and VPN services from its offices in Chennai, Trichy, Karur, Erode, Madurai, Salem, and Coimbatore, India.
This research proposes a topology abstraction (TA) service to enable VPN service providers to share core topology information with VPN customers in a scalable way. The TA service provides visibility into the state of the provider's network to improve VPN performance. Key challenges include generating accurate and fair TAs for each VPN. The paper develops three decentralized TA generation schemes and validates their performance through simulations over various topologies.
Voice operated remote for tv
A voice-activated remote control unit allows users to control TVs, DVD players, stereos, air conditioners, and other devices through spoken commands. The remote picks up a user's voice through input means, converts it to a digital signal, and uses voice recognition to identify commands in a database of predefined voice commands linked to control codes. It then emits the corresponding infrared signal to operate the targeted device.
On centralized and localized approximation algorithms for interference aware ...
This document discusses approximation algorithms for interference-aware broadcast scheduling in wireless sensor networks. It proposes both centralized and localized approximation algorithms for broadcast scheduling in 2D and 3D sensor networks. The algorithms account for sensors having different transmission ranges and interference ranges that are larger than transmission ranges. The centralized algorithms run in O(1) time while the localized algorithms allow for distributed implementation in 2D and 3D networks. Analysis and experiments evaluate the performance of the proposed algorithms.
Wireless sensor network for multi storey building design and implementation
Wireless sensor networks are a potential solution for home automation due to their reliability, low cost and low power usage. This paper describes the design and implementation of a wireless sensor network to control and monitor systems in a multi-storey building. The network was developed using Microchip ZigBee and installed in a building at the International University to evaluate its performance in a multi-storey environment.
Vehicles tracking and braking system in traffic
The document describes a vehicle tracking and braking system to help control traffic problems in cities with large populations and inadequate infrastructure. The system uses transmitters placed at zone entry and exit points to send the maximum speed limit for that zone to a receiver in each vehicle. A microcontroller in the vehicle then compares the actual speed to the limit and automatically regulates the vehicle's speed by varying the duty cycle of the pulse input to the motor driver. The entire system is low-cost, small in size, and can be easily installed on existing vehicles without major modifications to help enforce traffic rules and improve road safety.
Toward a statistical framework for source anonymity in sensor networks
This document presents a new statistical framework for modeling and evaluating source anonymity in sensor networks. It introduces the concept of "interval indistinguishability" to quantitatively measure anonymity. It models source anonymity as a problem of binary hypothesis testing with nuisance parameters. This transforms the problem of exposing private source information into searching for a data transformation that removes nuisance information. It discusses how existing solutions can be modified using this framework to improve anonymity.
Unterminated small signal behavioral model of dc–dc converters
The document discusses a new technique for obtaining unterminated small-signal behavioral models of DC-DC converters without removing them from their original environment. It allows the converter under test to remain working at a particular operating point while connected to any source and load. The technique measures the terminated frequency response and then uses a linear transformation matrix to decouple the source and load dynamics, obtaining the unterminated model. The paper presents verification and validation of the proposed characterization procedure.
Triple loop modulation (tlm) for high reliability and efficiency in a power f...
The document proposes a triple loop modulation (TLM) technique for power factor correction (PFC) systems that improves reliability and efficiency. TLM can automatically adjust bandwidth to rapidly increase or decrease inductor current, shortening transient response time. This improves reliability when dealing with output load variations. Testing showed the TLM technique achieved a high power factor of 99%, efficiency of 95%, and power capability of 90W, with transient response improved twofold over conventional PFC designs.
Tongue motion controlled wheel chair
The document describes a tongue-operated wheelchair control system called the Tongue Drive system (TDS). TDS uses small magnets attached to the tongue and hall effect sensors in a headset to detect and classify voluntary tongue motions, which are then used to control a powered wheelchair. The system consists of hall effect sensors that detect the magnet's position, a microcontroller that collects the sensor data and determines the appropriate direction to move the motors based on an intelligent embedded C program. This allows people with severe disabilities to effectively control a wheelchair through tongue motions.
Towards the implementation of io t for environmental condition monitoring in ...
The document discusses implementing an Internet of Things (IoT) system for environmental condition monitoring in homes using low-cost ubiquitous sensing. It proposes a system that uses smart sensors to reliably measure parameters like temperature and transmit the data via the internet. The system provides a self-control mechanism to optimize device operations during monitoring. Test results showed the integrated network architecture reliably transmitted sensing information 97% of the time. The system was able to generate real-time graphical information for remote home monitoring and management.
Viewers also liked (15)
Wireless access control system based on ieee 802.15.4
Wireless access control system based on ieee 802.15.4
Towards the implementation of iot for environmental condition monitoring in h...
Towards the implementation of iot for environmental condition monitoring in h...
Zigbee and atmega32 based wireless digital control and monitoring system for ...
Zigbee and atmega32 based wireless digital control and monitoring system for ...
Toward privacy preserving and collusion resistance in a location proof updati...
Toward privacy preserving and collusion resistance in a location proof updati...
On centralized and localized approximation algorithms for interference aware ...
On centralized and localized approximation algorithms for interference aware ...
Wireless sensor network for multi storey building design and implementation
Wireless sensor network for multi storey building design and implementation
Toward a statistical framework for source anonymity in sensor networks
Toward a statistical framework for source anonymity in sensor networks
Unterminated small signal behavioral model of dc–dc converters
Unterminated small signal behavioral model of dc–dc converters
Triple loop modulation (tlm) for high reliability and efficiency in a power f...
Triple loop modulation (tlm) for high reliability and efficiency in a power f...
Towards the implementation of io t for environmental condition monitoring in ...
Towards the implementation of io t for environmental condition monitoring in ...
Vehicle gas detection with automatic safety warning system using gsm
- 1. VEHICLE GAS DETECTION WITH AUTOMATIC SAFETY WARNING SYSTEM USING GSM ABSTRACT The process of working of this project is explained as follows. The total equipment of this project is placed inside a vehicle. In this project we have CO sensor which is interfaced to the microcontroller. Ignition switch is connected to the microcontroller to ON or OFF Engine of vehicle. The amount of CO released from the vehicle is measured by CO sensor. Whenever CO values exceed the threshold limit then intimation is given to the RTA by using GSM technology with the level of CO and vehicle details and vehicle is automatically locked. BLOCK DIAGRAM