The document summarizes the specifications and features of Resolite Tred-Safe walkable fiberglass reinforced polymer roof panels. Key points include:
1) The panels are truly walkable, fire rated with a Class 1 flame spread of 25, and have high resin content for corrosion resistance.
2) Standard profiles and colors are listed, and the panels exceed ASTM standards.
3) Load and span data is provided based on full-scale testing to simulate field conditions.
Fullback® Insulated Siding is an industry leading building product. Its moisture performance is only one of its many industry leading features. From the product’s introduction nearly 20 years ago, it was obvious that no siding system would be successful unless it allowed moisture to escape from the wall assembly, either as water vapor or bulk moisture. Progressive Foam completed moisture testing leading-up to the launch of Fullback® Insulated Siding, and has continued to test products as the Fullback® line has evolved.
Fullback® Insulated Siding is an industry leading building product. Its moisture performance is only one of its many industry leading features. From the product’s introduction nearly 20 years ago, it was obvious that no siding system would be successful unless it allowed moisture to escape from the wall assembly, either as water vapor or bulk moisture. Progressive Foam completed moisture testing leading-up to the launch of Fullback® Insulated Siding, and has continued to test products as the Fullback® line has evolved.
FIXXUS contributes to food safety complianceDanny Cook
•Break the cycle of constant deterioration and ongoing repair
With FIXXUS, “New” is not just starting over, but starting better.
•Increase plant safety (with improved lighting and morale),
•Eliminates all the seams and crevices where dirt, grease, bugs, and bacteria hide.
At a reasonable cost (lower than all other long-term options), without the indirect costs and major downtime and risks (think moving electrical panels) associated with replacement or cover-up, FIXXUS can rehab these areas. And the area is not just new; it is structurally improved, and sanitizes quicker than before (a lot quicker). And yes, it lasts; ask for our references.
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Producing flaked breakfast cereals from pellets or grits by passing them between contra-rotating rollers is a prime example of a process that is much more complex than it appears. Achieving the consistent high quality demanded by consumers at the high outputs needed by producers requires a great deal more process expertise and precision engineering than might be assumed.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
FIXXUS contributes to food safety complianceDanny Cook
•Break the cycle of constant deterioration and ongoing repair
With FIXXUS, “New” is not just starting over, but starting better.
•Increase plant safety (with improved lighting and morale),
•Eliminates all the seams and crevices where dirt, grease, bugs, and bacteria hide.
At a reasonable cost (lower than all other long-term options), without the indirect costs and major downtime and risks (think moving electrical panels) associated with replacement or cover-up, FIXXUS can rehab these areas. And the area is not just new; it is structurally improved, and sanitizes quicker than before (a lot quicker). And yes, it lasts; ask for our references.
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Producing flaked breakfast cereals from pellets or grits by passing them between contra-rotating rollers is a prime example of a process that is much more complex than it appears. Achieving the consistent high quality demanded by consumers at the high outputs needed by producers requires a great deal more process expertise and precision engineering than might be assumed.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
it’s not suggested to use DG41 and stiff PVB laminated glass in areas where temperature is over 30℃,SGP interlayer works in high temperature and low temperature
Alpha exactalloy Solder preforms for product and process improvementreginahuse
There is an Exactalloy™ preform in the rightshape and size to improve your assembly operation, product reliability and quality. Get Technical support from Krayden Regarding Alpha product and its proper application method.
Abrasion Resistant Coatings on Polycarbonatedmulvilleacree
Summary of results of research project to develop Diamond-Like Carbon (DLC) coatings to improve protection performance of eye wear for military personnel.
Radiation-Cured Components & Their Use in Hard, Scratch Resistant Coating App...Sartomer
This presentation covers the following topics:
- Current and potential hard coat applications
- Description of products tested and their attributes
- Taber haze and Taber abrasion resistance
- Weathering resistance
- Barrier properties of a typical hard coat formulation
- Polyurethane dispersion products (PUDs)
You can visit Sartomer at Sartomer.com and follow them on Twitter @SartomerGlobal and on LinkedIn.
A two coat, cold applied damp proof membrane, which dries to a uniform gloss black finish.
Find out more about LAC and RIW here:
http://www.riw.co.uk/products/liquid-applied-systems/lac/data-sheet
A fully bonded waterproof coating based on polyurethane technology
Find out more about RIW Flexiseal typical uses and benefits here:
http://www.riw.co.uk/products/liquid-applied-systems/Flexiseal
New uv curing oled encapsulation adhesive with low water
Tred Safe Product Brochure
1. Resolite Sheds New Light
TRED-SAFE™ SPECIFICATIONS
on Walkable FRP Roof Panels
1. Walkable fiberglass reinforced polymer wall/roof panels shall be Resolite
Tred-Safe Type 1645 translucent or opaque, corrosion resistant and fire retardant
as manufactured by Resolite, Moscow, TN., www.resolite.com,
Truly Walkable FRP Roof
1-888-RESOLITE (1-888-737-6548).
2. Panel manufacturer shall be ISO 9002 certified.
3. Resin shall be high quality isophthalic, neopentyl glycol and halogenated polyester
with acrylic modification and UV stabilizers. Resin content of the panel shall be a
minimum of 55% by weight. Panel
4. Glass reinforcement shall be composed of multiple layers of bidirectional
continuous strand WOVEN MAT and chopped strand multi-directional glass. Glass
High Resin Content for
content shall be a maximum 45% by weight. Both the interior and exterior surface of
the panel shall have an internal Corrosion Weathering (C/W) barrier fused to the
fiberglass matrix during the manufacturing process.
5. Panel finish shall have an embossed exterior and embossed interior to
maximize panel longevity.
Improved Corrosion
6. Panel weight shall be nominal 16 ounces per square foot.
7. Color shall be translucent #35 Frost with a 50% light transmission OR opaque #33 Resistance
Stone White. (Special Custom Colors are available by request)
8. Profile shall be standard: 7.2 x 1.5” or 4.2 x 1-1/16 optional: 7.2D x 1.75.
WOVEN Fiberglass Mat
9. Panels shall be Class 1 Fire Rated with a Flame Spread of 25.
The flame spread rating shall be achieved without the use of fillers.
Reinforcement for Added
STATEMENT OF POLICY
The information provided herein is solely based on factual data available to Resolite from many Safety in Roof Applications
years of experience in manufacturing, field evaluation, testing and research. This is to be used
Class 1 Fire Rated
only as a general guide by the designer and builder.
The overall satisfactory performance of any structural application is predicated by proper design
and erection. Resolite will not assume any responsibility for the design, detailing, or erection of the
substructure to which Resolite panels are attached.
STORAGE RECOMMENDATIONS
Flame Spread 25
Prior to installation, Resolite panels should be stored indoors in an upright position. Never pile flat,
Opaque Translucent Panels
as condensation may form between the panels causing internal fiberbloom and permanent dam-
age.
COLOR NOTICE
Resolite disclaims all warranties expressed or implied with respect to color and/or translucency of
polyester resin products.
ADDITIONAL RESOLITE CATALOGS
Literature and samples availible upon request.
DISCLAIMER
The information contained herein is for information purposes only. Resolite reserves the right to
change or withdraw such information, or the designs and details of the products upon which it is
based, either wholly or in any portion thereof, without further notice. For design and detailing
assistance on specific products, contact your Resolite sales representative.
®
TM
285 Industrial Drive
Moscow, TN 38057
®
Ph: 888-RESOLITE (888-737-6548)
www.resolite.com Fax: 901-877-1388
Email: sales@resolite.com
2. TM
Tred-Safe Features
• A Truly Walkable † Roof Panel- has high impact • Two Standard Colors- opaque 33 Stone White
resistance and is capable of safely supporting and translucent 35 Frost (50% light
Roofing Live Load (PSF)
normal foot traffic and weight of a maintenance transmission). Custom colors also available. 20 30 40 50 60
worker without buckling or damage.
• Two standard Profiles- 7.2 x 1.5 and 4.2 x 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
• Fire Rated - Class 1 Flame Spread classification of 25*. 1-1/16. Optional profiles: 7.2D x 1.75 7.2 7’9” 10’5” 9’7” 6’10” 9’1” 8’5” 6’2” 8’1” 7’8” 5’9” 7’2” 7’1” 5’5” 6’7” 6’8”
• Corrosion Resistant- produced with high resin • Outstanding Performance- Tred-Safe is 4.2 5’7” 7’6” 6’10” 4’10” 6’6” 6’0” 4’5” 5’9” 5’5” 4’1” 5’2” 5’1” 3’10” 4’9” 4’9”
content (55% by weight) premium quality isophthalic backed by 30 years of case history in the
halogenated polyester resin. corrosion and industrial market. Siding / Roofing Wind Load (PSF)
• Outstanding Weathering- our premium quality resin • Load/Span Data- based on full scale tests to 20 30 40 50 60
incorporates neopentyl glycol, acrylic modification simulate actual field conditions. 1 2 3
1 2 3 1 2 3 1 2 3 1 2 3
and UV stabilizers.
• Exceeds ASTM D 3841- standard 7.2 10’2” 13’2” 12’7” 8’11” 10’9” 11’0” 8’1” 9’3” 10’0” 7’6” 8’4” 9’3” 7’1” 7’5” 8’6”
• Embossed Surface- both exterior and interior specification for Glass- Fiber- Reinforced
surface finishes are embossed creating a resin rich Polyester Plastic Panels. 4.2 7’4” 9’5” 9’0” 6’4” 7’8” 7’10” 5’9” 6’8” 7’2” 5’4” 6’0” 6’8” 5’1” 5’5” 6’1”
surface to improve UV and corrosion resistance.
Notes:
• C/W Barrier Protection- a protective barrier on both TM
Types Available 1645 1. Load/Span limits are based on full scale panel tests
representing actual field conditions.
TM
exterior and interior surfaces that is fused into the 2. Panel span/deflection ratios (L/D) shall be limited to
Nominal Weight, oz./sq. ft. 16 oz.
resin/fiberglass matrix to give the panel even greater L/20 for wind loads and L/45 for live loads.
3. Factors of safety shall be 1.88 for panels subject to
TM
protection against degradation and eliminate any need TM
Nominal Thickness, in.** .100 wind loads and 2.5 for panels subjected to live loads.
for surface applied coatings. 4. Load/Span limits are based on fasteners with 3/4
Nominal Resin Content 55% washers in every low for 7.2 and fasteners with 5/8”
TM TM
washers in every other low for 4.2.
• Multiple Glass Reinforcements- Tred-Safe panels Hardness, Barcol 5. Other panel types, weights, glass reinforcements, resin
utilize a 5 layer combination of glass reinforcement 40 types, lengths, fastening options, or special loading
ASTM D 2583 requirements may be available. Please contact Resolite
including bidirectional continuous strand WOVEN and Customer Service Department for more information.
chopped strand glass. This multi-layered glass fiber Flexural Stength, psi
Tred-Safe™ FRP Composite Panel ASTM D 790
42,000
reinforcement provides:
• Better impact resistance Flexural Modulus, psi 7.2 x 1.5” Rib (optionalcoverage 43.2)
optional
width 46.5
Embossed Resin Rich Surface 6
• Better fastener pullover values ASTM D 790 1.30 x 10
• Better resistance to longitudinal splitting
• Better resistance to internal shear stresses Tensile Strength, psi 7.2
Chopped Strand Fiberglass
ASTM D 638 32,000 1-1/2
36 Coverage
• Uniform longitudinal and transverse reinforcements
39.25 Finish Width
provide increased flexural stability under cyclic Fire Resistance Ignition Point 820° F to 900° F
loading ASTM D 1929
4.2 x 1-1/16” Corrugated
Flame Spread Classification
†
A Tred-Safe walkable panel is one that is resistant to puncturing and tearing; is ASTM E 84 25*
rugged and durable; and is capable of safely supporting normal foot traffic and the 4.2 1-1/16
weight of a maintenance worker without buckling or damage. Please note that 37.8 Coverage
beyond actual material capabilities, standard construction safety measures must be Flammability Average Time of Burning less than 5 sec
Bidirectional Woven Average Extent of Burning less than 15 mm 42 Finish Width
observed and are the responsibility of the owner. Under actual service conditions
such as elevated temperatures or corrosive environments, some reduction in strength Fiberglass Reinforements ASTM D 635 Building Code Classification CC1 or C1
is possible over time, thus limiting the walkability of the panels. This should be * Resolite advises that the numerical flame spread
considered when selecting the allowable spans and when accessing the roof for classification is not intended to reflect hazards presented
maintenance. Maximum walkable spans should be limited to 7' 6. Simple spans are C/W Barrier TM
Coefficient of Expansion 2.89 x 10-5 by this or any other material under actual fire conditions.
not recommended for foot traffic; planks or ladders should be used for these (in/in °F) ASTM D696 ** All thicknesses based on flat material. Nominal
conditions. thickness varies with profile.