This document provides specifications and component information for drive motors and pump motors used in Toyota forklifts. It includes specifications for drive motors used in 16-35 and 40-50 model forklifts such as nominal voltage, rated output, dimensions, and weight. Diagrams show the components of the drive motor and procedures for removal, installation, disassembly, inspection, and reassembly are provided. Specifications and components are also provided for the pump motor, and procedures for removal, installation, disassembly, inspection, and reassembly of the pump motor are described.
Takeuchi tb108 compact excavator parts catalogue manual sn10810004~10812001fjsekkxszdmmem
This document provides an index and parts list for a TB108 excavator with serial numbers between 10810004-10812001. The index lists various systems of the excavator including the undercarriage, engine, hydraulic components, and attachments. Each item listed includes the part number, description, quantity, and reference page for more details. The document contains detailed parts lists and diagrams for components like the lower frame, track roller, idler, travel motor, and slew bearing.
Takeuchi tb016 compact excavator parts catalogue manual sn11610001 and upfjsekkxszdmmem
This document provides a parts list for a tracked excavator. It includes 3 sentences or less summaries of sections on the lower frame, shoe slide, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. Each section lists the relevant part numbers, descriptions, quantities, and other details. The parts list contains detailed technical information for maintenance and repair of the excavator.
Still r70 20 bis 45 fork truck service repair manualfjsekkxszdmmem
The document provides instructions for maintaining the power axle of a forklift truck. It describes the components of the power axle including the double reduction spur-type gearbox with differential assembly and electric motor. It provides details on removing and installing the entire power axle unit, as well as removing and installing individual components like the wheel hubs and half-shafts. Technical data is also listed, such as recommended lubricants and torque specifications for fasteners.
Kubota kx91 2 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and part numbers for a crankcase parts book. It lists over 220 individual part numbers, descriptions, quantities, serial number ranges for interchangeability, and other details. Country codes are also defined that may impact part interchangeability between countries.
Takeuchi tb108 compact excavator parts catalogue manual sn10810004~10812001fjsekkxszdmmem
This document provides an index and parts list for a TB108 excavator with serial numbers between 10810004-10812001. The index lists various systems of the excavator including the undercarriage, engine, hydraulic components, and attachments. Each item listed includes the part number, description, quantity, and reference page for more details. The document contains detailed parts lists and diagrams for components like the lower frame, track roller, idler, travel motor, and slew bearing.
Takeuchi tb016 compact excavator parts catalogue manual sn11610001 and upfjsekkxszdmmem
This document provides a parts list for a tracked excavator. It includes 3 sentences or less summaries of sections on the lower frame, shoe slide, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. Each section lists the relevant part numbers, descriptions, quantities, and other details. The parts list contains detailed technical information for maintenance and repair of the excavator.
Still r70 20 bis 45 fork truck service repair manualfjsekkxszdmmem
The document provides instructions for maintaining the power axle of a forklift truck. It describes the components of the power axle including the double reduction spur-type gearbox with differential assembly and electric motor. It provides details on removing and installing the entire power axle unit, as well as removing and installing individual components like the wheel hubs and half-shafts. Technical data is also listed, such as recommended lubricants and torque specifications for fasteners.
Kubota kx91 2 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and part numbers for a crankcase parts book. It lists over 220 individual part numbers, descriptions, quantities, serial number ranges for interchangeability, and other details. Country codes are also defined that may impact part interchangeability between countries.
Kubota kx71 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions for using a parts book. It defines the column headings used on parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and what they indicate.
Kubota kx61 2 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. The remainder of the document is a sample page from a parts book that lists specific part numbers, descriptions and other details for the main bearing case component of an excavator.
Kubota kx41 h excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and part numbers for a parts book covering a KX41H excavator. It includes a table with over 200 part numbers, descriptions, quantities, serial number ranges and other details. The table is organized by major systems of the excavator such as basic engine, fuel system, electrical system, hydraulic system, attachments and more. Notes are provided to explain country codes that may be included and the format of column headings in the parts book.
Kubota kx41 2 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range for the part's application, and interchangeability. It also notes country codes that may be included and their meanings. The bottom section is a sample page from the parts book listing specific part numbers and details for the "Crankcase" component.
Kubota kx41 2 (s series) excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings.
John deere series 220 diesel engines service repair manualfjsekkxszdmmem
This document provides specifications and general information about John Deere Series 220 diesel engines, including:
- The engine serial number plate contains information about the factory, engine model, and serial number.
- Engine specifications such as displacement, power ratings, lubrication requirements, and fuel specifications are listed.
- Recommended fuels, lubricants, and coolants are identified.
- Repair information includes safety guidelines, essential tools, and organization of repair sections.
John deere power tech 2.9 l diesel engines service repair manualfjsekkxszdmmem
This document provides an overview and summary of repair procedures for PowerTech 2.9 L diesel engines. It begins with introductory information such as engine identification, specifications, and diagrams. It then details procedures organized by major engine systems, including the cylinder head and valves (Group 05), cylinder block (Group 10), crankshaft (Group 15), and other systems. The document emphasizes safety and provides concise instructions for repairs, with references to additional information sources. It aims to equip technicians with the essential guidance for servicing these engines.
Hyundai 20 l(g) 7a forklift truck service repair manualfjsekkxszdmmem
This document provides instructions for disassembling and assembling a hydraulic gear pump and main control valve.
For the hydraulic gear pump: Clean all parts thoroughly before inspection. Replace all seals during reassembly. Lubricate seals with petroleum jelly and install in correct orientation. Assemble bearing blocks, gears, housing and end cover, ensuring proper alignment. Tighten bolts to specified torque.
For the main control valve: Stack sections with work ports facing up and spool ends aligned. Insert tie rods and tighten nuts progressively to specified torque to press sections together without damaging seals.
Hyundai 18 l 7a forklift truck service repair manualfjsekkxszdmmem
This document provides instructions for disassembling and assembling a hydraulic gear pump and main control valve.
For the hydraulic gear pump:
- Mark the pump components before disassembly for proper reassembly.
- Inspect parts for wear and replace seals during reassembly.
- Assemble in the correct order, ensuring proper seal installation.
For the main control valve:
- Stack the valve sections with ports facing up and spool ends in the same direction.
- Insert tie rods and tighten nuts progressively and uniformly to a specified torque.
Hyundai 15 l 7a forklift truck service repair manualfjsekkxszdmmem
This section describes the disassembly and assembly procedures for the hydraulic gear pump. It outlines the necessary tools and safety precautions. The steps include draining the oil, marking parts for reassembly, removing the mounting bolts, end cover, gears, shafts, bearing blocks, seals and pins. Proper cleaning and protection of parts is emphasized.
Husqvarna 371 xp chainsaw service repair manualfjsekkxszdmmem
- The document provides instructions for dismantling and inspecting the chain brake safety equipment on a chainsaw.
- Key steps include removing the chain, clutch, hand guard, chain guide plate, and brake assembly cover.
- The pressure spring, lever arm, toggle joint, and brake strap can then be removed.
- Upon reassembly, the chain brake must be tested by holding the running saw over a surface and releasing the front grip to ensure the brake engages properly based on the guide bar length.
Husqvarna 365 chainsaw service repair manualfjsekkxszdmmem
- The document provides instructions for dismantling and inspecting the chain brake safety equipment on a chainsaw.
- Key steps include removing the chain, clutch, hand guard, chain guide plate, and brake assembly cover.
- The pressure spring, lever arm, toggle joint, and brake strap can then be removed.
- Upon reassembly, the chain brake must be tested by holding the running saw over a surface and releasing the front grip to ensure the brake engages properly based on the guide bar length.
Husqvarna 362 xp chainsaw service repair manualfjsekkxszdmmem
- The document provides instructions for dismantling and inspecting the chain brake safety equipment on a chainsaw.
- Key steps include removing the chain, clutch, hand guard, chain guide plate, and brake assembly cover.
- The pressure spring, lever arm, toggle joint, and brake strap can then be removed.
- Upon reassembly, the chain brake must be tested by holding the running saw over a surface and releasing the front grip to ensure the brake engages properly based on the guide bar length.
Husqvarna 339 xp chainsaw service repair manualfjsekkxszdmmem
1) The document provides instructions for servicing and repairing several chain saw models, including the 336, 334T, 338XPT, and 339XP. It details procedures for dismantling, cleaning, inspecting, and reassembling components.
2) Safety instructions and symbols are defined to ensure safe repair practices. Troubleshooting charts outline potential issues, starting difficulties, idling problems, and high-speed operation issues with suggested causes.
3) Technical specifications are provided for each model including engine details, fuel/oil capacities, weights, and replacement spark plug information. A list of required special tools is also included.
Husqvarna 338 xpt chainsaw service repair manualfjsekkxszdmmem
1) The document provides instructions for servicing and repairing chain saw models 334T, 338XPT, 336, and 339XP. It includes sections on safety, troubleshooting, technical specifications, tools needed, and repair procedures for various systems.
2) Dismantling and reassembly of the entire chain saw is described, with the order of operations specified. Repair of individual systems is also covered.
3) Safety precautions are emphasized, including proper protective equipment and warnings regarding potential dangers from the chain saw and its fuel.
Husqvarna 336 chainsaw service repair manualfjsekkxszdmmem
1) The document provides instructions for servicing and repairing several chain saw models, including the 336, 334T, 338XPT, and 339XP. It contains sections on safety, troubleshooting, technical specifications, tools needed, and repair procedures for different systems.
2) Technicians should follow the dismantling, cleaning, inspection, and assembly instructions in order when fully servicing the chain saw. Specific systems can also be repaired individually by following the relevant sections.
3) Safety precautions must be understood before beginning any repair work. Hazards include risks from fuel, hot surfaces, pressurized parts, and improper protective equipment.
Husqvarna 334 t chainsaw service repair manualfjsekkxszdmmem
1) The document provides technical specifications and service information for several Husqvarna chain saw models, including the 336, 334T, 338XPT, and 339XP.
2) Troubleshooting tips are provided for common issues like difficult starting, idling problems, excessive fuel consumption, and lack of power. Potential causes are listed for each issue along with testing and repair instructions.
3) Detailed dismantling, cleaning, inspection, and assembly instructions are given for components like the starter, ignition system, carburetor, and crankshaft to allow comprehensive repair of individual systems or a complete overhaul of the chain saw.
Fiat kobelco w70 mini wheel loader service repair manualfjsekkxszdmmem
The document provides instructions for dismantling and reassembling wheel loader axles. It describes how to:
- Remove the wheels and propeller shaft and lift the axle out of position.
- Disconnect hydraulic motors, brake lines, and lubrication lines before extracting the rear axle.
- Reassemble by reversing the removal process and refilling lubricants.
- Dismantle wheel hub assemblies by removing bearings, seals, and gears.
- Calculate spacer thickness when reassembling based on measured gaps.
Fiat kobelco w60 mini wheel loader service repair manualfjsekkxszdmmem
The document provides instructions for dismantling and reassembling wheel loader axles. It describes how to:
- Remove the wheels and propeller shaft and lift the axle out of position.
- Disconnect hydraulic motors, brake lines, and lubrication lines before extracting the rear axle.
- Reassemble by reversing the removal process and refilling lubricants.
- Dismantle wheel hub assemblies by removing bearings, seals, and gears.
- Calculate spacer thickness when reassembling based on measured gaps.
Fiat kobelco w50 mini wheel loader service repair manualfjsekkxszdmmem
The document provides instructions for dismantling and reassembling wheel loader axles. It describes how to:
- Remove the wheels and propeller shaft and lift the axle out of position.
- Disconnect hydraulic motors, brake lines, and lubrication lines before extracting the rear axle.
- Reassemble by reversing the removal process and refilling lubricants.
- Dismantle wheel hub assemblies by removing bearings, seals, and gears.
- Take apart front and rear axle drive assemblies by dismantling differentials, brakes, and gearing components.
- Reassemble components by pressing in new seals and bearings, replacing worn parts, and adjusting preloads.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Kubota kx71 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions for using a parts book. It defines the column headings used on parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and what they indicate.
Kubota kx61 2 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. The remainder of the document is a sample page from a parts book that lists specific part numbers, descriptions and other details for the main bearing case component of an excavator.
Kubota kx41 h excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and part numbers for a parts book covering a KX41H excavator. It includes a table with over 200 part numbers, descriptions, quantities, serial number ranges and other details. The table is organized by major systems of the excavator such as basic engine, fuel system, electrical system, hydraulic system, attachments and more. Notes are provided to explain country codes that may be included and the format of column headings in the parts book.
Kubota kx41 2 excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range for the part's application, and interchangeability. It also notes country codes that may be included and their meanings. The bottom section is a sample page from the parts book listing specific part numbers and details for the "Crankcase" component.
Kubota kx41 2 (s series) excavator parts catalogue manualfjsekkxszdmmem
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings.
John deere series 220 diesel engines service repair manualfjsekkxszdmmem
This document provides specifications and general information about John Deere Series 220 diesel engines, including:
- The engine serial number plate contains information about the factory, engine model, and serial number.
- Engine specifications such as displacement, power ratings, lubrication requirements, and fuel specifications are listed.
- Recommended fuels, lubricants, and coolants are identified.
- Repair information includes safety guidelines, essential tools, and organization of repair sections.
John deere power tech 2.9 l diesel engines service repair manualfjsekkxszdmmem
This document provides an overview and summary of repair procedures for PowerTech 2.9 L diesel engines. It begins with introductory information such as engine identification, specifications, and diagrams. It then details procedures organized by major engine systems, including the cylinder head and valves (Group 05), cylinder block (Group 10), crankshaft (Group 15), and other systems. The document emphasizes safety and provides concise instructions for repairs, with references to additional information sources. It aims to equip technicians with the essential guidance for servicing these engines.
Hyundai 20 l(g) 7a forklift truck service repair manualfjsekkxszdmmem
This document provides instructions for disassembling and assembling a hydraulic gear pump and main control valve.
For the hydraulic gear pump: Clean all parts thoroughly before inspection. Replace all seals during reassembly. Lubricate seals with petroleum jelly and install in correct orientation. Assemble bearing blocks, gears, housing and end cover, ensuring proper alignment. Tighten bolts to specified torque.
For the main control valve: Stack sections with work ports facing up and spool ends aligned. Insert tie rods and tighten nuts progressively to specified torque to press sections together without damaging seals.
Hyundai 18 l 7a forklift truck service repair manualfjsekkxszdmmem
This document provides instructions for disassembling and assembling a hydraulic gear pump and main control valve.
For the hydraulic gear pump:
- Mark the pump components before disassembly for proper reassembly.
- Inspect parts for wear and replace seals during reassembly.
- Assemble in the correct order, ensuring proper seal installation.
For the main control valve:
- Stack the valve sections with ports facing up and spool ends in the same direction.
- Insert tie rods and tighten nuts progressively and uniformly to a specified torque.
Hyundai 15 l 7a forklift truck service repair manualfjsekkxszdmmem
This section describes the disassembly and assembly procedures for the hydraulic gear pump. It outlines the necessary tools and safety precautions. The steps include draining the oil, marking parts for reassembly, removing the mounting bolts, end cover, gears, shafts, bearing blocks, seals and pins. Proper cleaning and protection of parts is emphasized.
Husqvarna 371 xp chainsaw service repair manualfjsekkxszdmmem
- The document provides instructions for dismantling and inspecting the chain brake safety equipment on a chainsaw.
- Key steps include removing the chain, clutch, hand guard, chain guide plate, and brake assembly cover.
- The pressure spring, lever arm, toggle joint, and brake strap can then be removed.
- Upon reassembly, the chain brake must be tested by holding the running saw over a surface and releasing the front grip to ensure the brake engages properly based on the guide bar length.
Husqvarna 365 chainsaw service repair manualfjsekkxszdmmem
- The document provides instructions for dismantling and inspecting the chain brake safety equipment on a chainsaw.
- Key steps include removing the chain, clutch, hand guard, chain guide plate, and brake assembly cover.
- The pressure spring, lever arm, toggle joint, and brake strap can then be removed.
- Upon reassembly, the chain brake must be tested by holding the running saw over a surface and releasing the front grip to ensure the brake engages properly based on the guide bar length.
Husqvarna 362 xp chainsaw service repair manualfjsekkxszdmmem
- The document provides instructions for dismantling and inspecting the chain brake safety equipment on a chainsaw.
- Key steps include removing the chain, clutch, hand guard, chain guide plate, and brake assembly cover.
- The pressure spring, lever arm, toggle joint, and brake strap can then be removed.
- Upon reassembly, the chain brake must be tested by holding the running saw over a surface and releasing the front grip to ensure the brake engages properly based on the guide bar length.
Husqvarna 339 xp chainsaw service repair manualfjsekkxszdmmem
1) The document provides instructions for servicing and repairing several chain saw models, including the 336, 334T, 338XPT, and 339XP. It details procedures for dismantling, cleaning, inspecting, and reassembling components.
2) Safety instructions and symbols are defined to ensure safe repair practices. Troubleshooting charts outline potential issues, starting difficulties, idling problems, and high-speed operation issues with suggested causes.
3) Technical specifications are provided for each model including engine details, fuel/oil capacities, weights, and replacement spark plug information. A list of required special tools is also included.
Husqvarna 338 xpt chainsaw service repair manualfjsekkxszdmmem
1) The document provides instructions for servicing and repairing chain saw models 334T, 338XPT, 336, and 339XP. It includes sections on safety, troubleshooting, technical specifications, tools needed, and repair procedures for various systems.
2) Dismantling and reassembly of the entire chain saw is described, with the order of operations specified. Repair of individual systems is also covered.
3) Safety precautions are emphasized, including proper protective equipment and warnings regarding potential dangers from the chain saw and its fuel.
Husqvarna 336 chainsaw service repair manualfjsekkxszdmmem
1) The document provides instructions for servicing and repairing several chain saw models, including the 336, 334T, 338XPT, and 339XP. It contains sections on safety, troubleshooting, technical specifications, tools needed, and repair procedures for different systems.
2) Technicians should follow the dismantling, cleaning, inspection, and assembly instructions in order when fully servicing the chain saw. Specific systems can also be repaired individually by following the relevant sections.
3) Safety precautions must be understood before beginning any repair work. Hazards include risks from fuel, hot surfaces, pressurized parts, and improper protective equipment.
Husqvarna 334 t chainsaw service repair manualfjsekkxszdmmem
1) The document provides technical specifications and service information for several Husqvarna chain saw models, including the 336, 334T, 338XPT, and 339XP.
2) Troubleshooting tips are provided for common issues like difficult starting, idling problems, excessive fuel consumption, and lack of power. Potential causes are listed for each issue along with testing and repair instructions.
3) Detailed dismantling, cleaning, inspection, and assembly instructions are given for components like the starter, ignition system, carburetor, and crankshaft to allow comprehensive repair of individual systems or a complete overhaul of the chain saw.
Fiat kobelco w70 mini wheel loader service repair manualfjsekkxszdmmem
The document provides instructions for dismantling and reassembling wheel loader axles. It describes how to:
- Remove the wheels and propeller shaft and lift the axle out of position.
- Disconnect hydraulic motors, brake lines, and lubrication lines before extracting the rear axle.
- Reassemble by reversing the removal process and refilling lubricants.
- Dismantle wheel hub assemblies by removing bearings, seals, and gears.
- Calculate spacer thickness when reassembling based on measured gaps.
Fiat kobelco w60 mini wheel loader service repair manualfjsekkxszdmmem
The document provides instructions for dismantling and reassembling wheel loader axles. It describes how to:
- Remove the wheels and propeller shaft and lift the axle out of position.
- Disconnect hydraulic motors, brake lines, and lubrication lines before extracting the rear axle.
- Reassemble by reversing the removal process and refilling lubricants.
- Dismantle wheel hub assemblies by removing bearings, seals, and gears.
- Calculate spacer thickness when reassembling based on measured gaps.
Fiat kobelco w50 mini wheel loader service repair manualfjsekkxszdmmem
The document provides instructions for dismantling and reassembling wheel loader axles. It describes how to:
- Remove the wheels and propeller shaft and lift the axle out of position.
- Disconnect hydraulic motors, brake lines, and lubrication lines before extracting the rear axle.
- Reassemble by reversing the removal process and refilling lubricants.
- Dismantle wheel hub assemblies by removing bearings, seals, and gears.
- Take apart front and rear axle drive assemblies by dismantling differentials, brakes, and gearing components.
- Reassemble components by pressing in new seals and bearings, replacing worn parts, and adjusting preloads.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Globalfleet - global fleet survey 2021 full results
Toyota 7 fbmf35 forklift service repair manual
1. SECTION INDEX
NAME SECTION
GENERAL 0
BATTERY 1
CONTROLLER 2
MULTI-DISPLAY FUNCTIONS 3
TROUBLESHOOTING 4
MOTOR 5
DRIVE UNIT 6
FRONT AXLE 7
REAR AXLE 8
STEERING 9
BRAKE 10
BODY 11
MATERIAL HANDLING SYSTEM 12
MAST 13
CYLINDER 14
OIL PUMP 15
OIL CONTROL VALVE 16
SAS FUNCTIONS 17
APPENDIX 18
TOYOTA 7FBMF 16-50
< Tillbaka till IndexNew Model Features
OPS fr.o.m 2006
2. 0-1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
GENERAL
Page
EXTERIOR VIEWS........................... 0-2
VEHICLE MODELS.......................... 0-4
FRAME NUMBER............................. 0-4
HOW TO USE THIS
MANUAL .......................................... 0-5
EXPLANATION METHOD ................. 0-5
TERMINOLOGY................................. 0-6
ABBREVIATIONS.............................. 0-6
OPERATIONAL TIPS ...................... 0-7
JACK-UP POINT .............................. 0-8
HOISTING THE VEHICLE.............. 0-9
CAUTION FOR TOWING................ 0-9
PARKING BRAKE RELEASE
METHOD.......................................... 0-9
ATTENTIVE POINTS ON SAS.... 0-10
CIRCUIT TESTER .......................... 0-11
STANDARD BOLT & NUT
TIGHTENING TORQUE.............. 0-13
BOLT STRENGTH TYPE
IDENTIFICATION METHOD.......... 0-13
TIGHTENING TORQUE TABLE...... 0-14
PRECOATED BOLTS ................... 0-15
HIGH PRESSURE HOSE
FITTING TIGHTENING
TORQUE......................................... 0-15
WIRE ROPE SUSPENSION
ANGLE LIST.................................. 0-16
Page
SAFE LOAD FOR EACH WIRE
ROPE SUSPENSION
ANGLE............................................ 0-16
COMPONENTS WEIGHT ............. 0-17
RECOMMENDED LUBRICANT
QUANTITY & TYPES .................. 0-18
LUBRICATION CHART ................ 0-19
PERIODIC MAINTENANCE......... 0-21
PERIODIC REPLACEMENT
OF PARTS AND
LUBRICANTS ............................... 0-25
Totaldokument, service...........0-26
5. 0-4
VEHICLE MODELS
FRAME NUMBER
Model code Load capacity Vehicle model Voltage
16 1.6 ton 7FBMF16 80 V/72 V
18 1.8 ton 7FBMF18 ↑
20 2.0 ton 7FBMF20 ↑
25 2.5 ton 7FBMF25 ↑
30 3.0 ton 7FBMF30 ↑
35 3.5 ton 7FBMF35 ↑
40 4.0 ton 7FBMF40 ↑
45 4.5 ton 7FBMF45 ↑
50 5.0 ton 7FBMF50 ↑
Vehicle model Punching format Frame No. punching position
)%0)
)%0)
)%0)
)%0)
)%0)
)%0)
)%0)
)%0)
)%0)
)%0)
)%0) )%0)
)%0)
Punching position
6. 0-5
HOW TO USE THIS MANUAL
EXPLANATION METHOD
1. Operation procedure
(1) The operation procedure is described in either pattern A or pattern B below.
Pattern A:Explanation of each operation step with illustration.
Pattern B:Explanation of operation procedure by indicating step numbers in one illustration,
followed by explanation of cautions and notes summarized as point operations.
Example of description in pattern B
DISASSEMBLY INSPECTION REASSEMBLY
Tightening torque unit T = N⋅m (kgf⋅cm) [ft⋅lbf]
• •
Disassembly Procedure
1 Remove the cover. [Point 1]
2 Remove the bushing [Point 2] Operation explained later
3 Remove the gear.
Point Operations Explanation of key point for operation with an illustration
[Point 1]
Disassembly:
Put a match mark when removing the pump cover.
[Point 2]
Inspection:
Measure the bushing inside diameter.
Limit: 19.12 mm (0.7528 in)
T = 46.1 ~ 48.1
(470 ~ 490)
[34.0 ~ 35.5]
• Step Nos. are sometimes partially
omitted in illustrations.
• When a part requiring tightening
torque instruction is not indicated
in the illustration, the part name is
described in the illustration frame.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
7. 0-6
2. How to read components figures (Example)
3. Matters omitted in this manual
(1) This manual omits description of the following jobs, but they should be performed in the actual
operation:
(a) Cleaning and washing of removed parts as required
(b) Visual inspection (partially described)
TERMINOLOGY
Caution:
Important matters of which negligence may cause hazards to the human body. Be sure to observe
them.
Note:
Important items of which negligence may cause breakage or breakdown, or matters in operation
procedure requiring special attention.
Standard: Values showing the allowable range for inspections and adjustments.
Limit: Maximum or minimum allowable value for inspections or adjustments.
ABBREVIATIONS
Abbreviation (code) Meaning Abbreviation (code) Meaning
ASSY Assembly SAE
Society of Automotive
Engineers (USA)
ATT Attachment SAS System of active stability
CHPS
Central hydraulic
power steering
SST Special service tool
LH Left hand STD Standard
L/ Less T = Tightening torque
OPT Option T Number of teeth ( )
O/S Oversize U/S Undersize
PS Power steering W/ With
RH Right hand
3201
FIG number in parts catalog
(1) The components figure uses the illustration
in the parts catalog for the vehicle model.
Please refer to the catalog to check the part
name.
The number at the top right of each
components figure indicates the Fig.
number in the parts catalog.
11. 5-4
REMOVAL INSTALLATION
T = N·m (kgf·cm) [ft·lbf]
Removal Procedure
1 Remove the drive unit drive motor W/front axle ASSY. (See page 6-6.)
2 Remove the drive motor sensor bracket, terminal bracket, and sensor cover.
3 Place match marks between the end bracket, stator ASSY, and gear case.
4 Remove the nuts and through bolts. [Point 1]
5 Remove the end bracket. [Point 2]
6 Remove the stator ASSY W/rotor ASSY.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
Note:
Apply MP grease to the rotor ASSY spline.
•
4
2
5
2 6
T = 45.0 ~ 55.0 (460 ~ 560)
[33.3 ~ 40.5]
12. 5-5
Point Operations
[Point 1]
Removal:
After removing the through bolts, use a hoist to lift the yoke
ASSY.
Installation:
After tightening the through bolts until they touch bottom,
tighten the nuts in the order shown in the figure.
Installation:
When replacing the motor with a new one, be sure to re-
move the stopper bolt and spacer installed in the center of
the end bracket. (They are not installed hereafter.)
[Point 2]
Removal:
Use a plastic hammer to tap lightly on the end bracket to
remove it.
Installation:
Use a plastic hammer to tap lightly on the end bracket to
install it.
Installation:
Align the speed sensor harness with the notch in the end
bracket and install the end bracket.
When doing this, do not forget to install the wave washer.
2
4
1
3
Spacer
Stopper bolt
Wave
washer
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
13. OBS! Lager finns som separat reservdel. P/N på sensorlagret:
5-6
DISASSEMBLY INSPECTION REASSEMBLY
Note:
• Do not apply a shock to the bearing W/speed sensor.
Disassembly Procedure
1 Remove the rotor ASSY W/bearing. [Point 1]
2 Remove the bearing. [Point 2]
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
• •
2
2
1
7FBMF 16-35 = 14160-F9802-71
7FBMF 40-50 = 14160-F9801-71
14. 5-7
Point Operations
[Point 1]
Inspection:
Measure the stator ASSY insulation resistance.
Measurement locations: Between the stator and each ter-
minal (U, V, W)
Standard: 1 MΩ or more
Inspection:
Measure the speed sensor insulation resistance.
Measurement locations: Between the stator and the speed
sensor connector terminals (4 locations)
Standard: ∞ Ω
Inspection:
Measure the temperature sensor insulation resistance.
Measurement locations: Between the stator and the tem-
perature sensor connector terminals (2 locations).
Standard: ∞ Ω
Measurement locations: Between the temperature sensor
connector terminals
Standard: 0.5 ~ 1.0 kΩ
[Point 2]
Disassembly:
SST 09950-76014-71
(SST 09950-40011)
SST
15. 5-8
Reassembly:
Use the following procedure to install the bearing.
1. Install the bearing (L/speed sensor).
SST 09370-20270-71
2. Install the bearing (W/speed sensor).
Tapping on the bearing could damage the sensor. Use
a press to install the bearing.
SST 09411-41800-71
SST
L/speed sensor
SST
W/speed sensor
19. 5-12
REMOVAL INSTALLATION
T = N·m (kgf·cm) [ft·lbf]
16 ~ 35 model
40 ~ 50 model
•
T = 16.2 ~ 37.8
(165 ~ 385)
[11.9 ~ 27.9]
8 T = 39.0 ~ 91.0
(398 ~ 928)
[28.8 ~ 67.1]
8
T = 16.2 ~ 37.8
(165 ~ 385)
[11.9 ~ 27.9]
8 T = 39.0 ~ 91.0
(398 ~ 928)
[28.8 ~ 67.1]
8
9
9
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 5-13
Removal Procedure
1 Remove the battery. (See page 13-10.)
2 Remove the counterweight. (See page 11-10.)
3 Remove the motor cable.
4 Disconnect the speed sensor and temperature sensor connectors.
5 Remove the oil pump set bolts and separate the oil pump from the pump motor.
6 Disconnect the swing lock solenoid connector.
7 Remove the lock cylinder cover.
8 Remove the lock cylinder lower pin and slide the swing lock cylinder to the left. [Point 1]
9 Remove the pump motor. [Point 2]
Installation Procedure
The installation procedure is the reverse of the removal procedure.
Note:
Apply lock agent (08833-76001-71 (08833-00070)) to the threads of the lock cylinder lower pin set
bolt and tighten the bolt.
Point Operations
[Point 1]
Removal•
Installation:
Jack up the rear axle and support the frame on wooden
blocks.
[Point 2] (40 ~ 50 model)
Removal•
Installation:
To prevent the right rear insulator bolt from being dam-
aged, connect shackles to the two left side wire ropes, and
then tilt and raise up the pump motor.
Installation:
Apply lock agent (08833-76002-71 (08833-00080)) to the
threads of the right rear insulator bolts and tighten the
bolts.Apply lock
agent here
22. 5-14
DISASSEMBLY INSPECTION REASSEMBLY
Note:
• Do not apply a shock to the bearing W/speed sensor.
• The minimum unit of the parts supply for the bearing consists of “Rotor ASSY W/bearing” even
though the bearing is seperable on actual service.
T = N·m (kgf·cm) [ft·lbf]
Disassembly Procedure
1 Remove the end bracket (terminal side). [Point 1]
2 Remove the rotor ASSY W/bearing. [Point 2]
3 Remove the bearing. [Point 3]
4 Remove the stator ASSY. [Point 4]
Reassembly Procedure
The reassembly procedure is the reverse of the disassembly procedure.
• •
1
2
3
3
16 ~ 35 model:
T = 22.5 ~ 27.5 (229 ~ 280)
[16.6 ~ 20.3]
4
40 ~ 50 model:
T = 45 ~ 55 (459 ~ 561)
[33.2 ~ 40.6]
23. 5-15
Point Operations
[Point 1]
Disassembly:
Put match marks between the end bracket, stator ASSY,
and end bracket (terminal side).
Reassembly:
Align the match marks when installing.
Reassembly:
Align the speed sensor harness with the slot in the end
bracket (terminal side) and install the end bracket.
[Point 2]
Inspection:
Measure the speed sensor insulation resistance.
Measurement locations: Between the stator and the speed
sensor connector terminals (4 locations).
Standard: ∞ Ω
[Point 3]
Disassembly:
SST 09950-76014-71 ............(1)
(SST 09950-40011)
SST 09950-76018-71 ............(2)
(SST 09950-60010)
Reassembly:
Use the following procedure to install the bearing.
1. Install the bearing (L/speed sensor).
SST 09370-20270-71
Match marks
SST (1)
SST (2)
SST
L/speed sensor