The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It contains sections on general information, the engine, transmission, and other vehicle systems. The general section provides exterior views of the vehicle, specifications on vehicle models, instructions for using the manual, terminology, and other reference information needed for service and repair.
001 procedimento para troca de kits kksb no campo (errata) Geraldo Sebastian
Este documento fornece instruções para a troca de kits KKSB em bombas injetoras VE usadas em tratores e equipamentos agrícolas da New Holland e Case. Ele lista os números de peça das bombas, os novos kits KKSB correspondentes e seus pontos estáticos. Instruções detalhadas mostram como desmontar a bomba, instalar o novo kit e remontá-la.
The document provides information about wiring diagrams for various Volvo models, including the C30, S40, V50, and C70. It contains sections on electrical distribution, fuses, relays, ground connections, control modules, data communication, components by group (e.g. fuel system, cooling system), connectors, cable routing, and an index. Safety warnings are provided for working on vehicles with airbags and inflatable curtains. Only authorized workshops should perform repairs involving these systems.
As 3 frases são:
O documento fornece uma tabela de aplicações de velas e cabos de ignição para diversas montadoras e modelos de veículos entre os anos de 2010 e 2011. A tabela lista os códigos e especificações técnicas das velas e cabos NGK recomendados de acordo com o ano, motor e tipo de combustível de cada veículo.
CATERPILLAR CAT GP50K FORKLIFT LIFT TRUCKS CHASSIS AND MAST Service Repair Ma...jkskmdkemde
This service manual provides servicing and maintenance information for Caterpillar lift trucks powered by GM 4.3L gasoline engines and Mitsubishi S6S diesel engines. The manual covers GP40K, GP40KL, GP45K, GP50K, DP40K, DP40KL, DP45K, and DP50K models, providing specifications, component locations, safety procedures, and other technical details needed for repair and maintenance of these trucks. Safety warnings indicate potential hazards and direct the user to read all instructions before working on the trucks.
This document provides technical information for repairing NEF power generation engines. It begins with an overview of the NEF engine models and applications. It then discusses fuel types, specific considerations for power generation applications, and overhaul/repair procedures. The document provides detailed instructions and diagrams to guide repairs. Safety precautions are outlined, and conversion tables are included for units of measurement.
Caterpillar cat 966 e wheel loader (prefix 94x) service repair manual (94x064...fjjkskefmsemwe
This document provides instructions for installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
1) Installing a fuel pump timing pin and bolt to hold the fuel pump camshaft in position.
2) Installing the weight assembly for the timing advance and tightening the bolt to the specified torque.
3) Removing the tools and installing the starting motor once the timing advance is installed.
O documento descreve (1) o sistema de injeção eletrônica Common Rail da Bosch, (2) seus principais componentes como bomba de alta pressão, injetores, válvula reguladora de pressão e sensores, e (3) as vantagens deste sistema como alto torque em baixas rotações e menor consumo de combustível.
The document lists vehicle models and their corresponding year, engine, and engine control system. It shows that many Fiat, Citroën, BMW, and Audi models from 2000s-2010s use Bosch engine control units, while some Chrysler and Dodge models from the 1990s-2000s use OBD II or PWM systems. The list provides details on over 100 vehicle makes and models primarily from European manufacturers.
001 procedimento para troca de kits kksb no campo (errata) Geraldo Sebastian
Este documento fornece instruções para a troca de kits KKSB em bombas injetoras VE usadas em tratores e equipamentos agrícolas da New Holland e Case. Ele lista os números de peça das bombas, os novos kits KKSB correspondentes e seus pontos estáticos. Instruções detalhadas mostram como desmontar a bomba, instalar o novo kit e remontá-la.
The document provides information about wiring diagrams for various Volvo models, including the C30, S40, V50, and C70. It contains sections on electrical distribution, fuses, relays, ground connections, control modules, data communication, components by group (e.g. fuel system, cooling system), connectors, cable routing, and an index. Safety warnings are provided for working on vehicles with airbags and inflatable curtains. Only authorized workshops should perform repairs involving these systems.
As 3 frases são:
O documento fornece uma tabela de aplicações de velas e cabos de ignição para diversas montadoras e modelos de veículos entre os anos de 2010 e 2011. A tabela lista os códigos e especificações técnicas das velas e cabos NGK recomendados de acordo com o ano, motor e tipo de combustível de cada veículo.
CATERPILLAR CAT GP50K FORKLIFT LIFT TRUCKS CHASSIS AND MAST Service Repair Ma...jkskmdkemde
This service manual provides servicing and maintenance information for Caterpillar lift trucks powered by GM 4.3L gasoline engines and Mitsubishi S6S diesel engines. The manual covers GP40K, GP40KL, GP45K, GP50K, DP40K, DP40KL, DP45K, and DP50K models, providing specifications, component locations, safety procedures, and other technical details needed for repair and maintenance of these trucks. Safety warnings indicate potential hazards and direct the user to read all instructions before working on the trucks.
This document provides technical information for repairing NEF power generation engines. It begins with an overview of the NEF engine models and applications. It then discusses fuel types, specific considerations for power generation applications, and overhaul/repair procedures. The document provides detailed instructions and diagrams to guide repairs. Safety precautions are outlined, and conversion tables are included for units of measurement.
Caterpillar cat 966 e wheel loader (prefix 94x) service repair manual (94x064...fjjkskefmsemwe
This document provides instructions for installing the automatic timing advance on a Caterpillar 3306 engine. It describes:
1) Installing a fuel pump timing pin and bolt to hold the fuel pump camshaft in position.
2) Installing the weight assembly for the timing advance and tightening the bolt to the specified torque.
3) Removing the tools and installing the starting motor once the timing advance is installed.
O documento descreve (1) o sistema de injeção eletrônica Common Rail da Bosch, (2) seus principais componentes como bomba de alta pressão, injetores, válvula reguladora de pressão e sensores, e (3) as vantagens deste sistema como alto torque em baixas rotações e menor consumo de combustível.
The document lists vehicle models and their corresponding year, engine, and engine control system. It shows that many Fiat, Citroën, BMW, and Audi models from 2000s-2010s use Bosch engine control units, while some Chrysler and Dodge models from the 1990s-2000s use OBD II or PWM systems. The list provides details on over 100 vehicle makes and models primarily from European manufacturers.
El documento presenta el nuevo controlador Telys 2 de SDMO, que reemplaza al Telys original. El Telys 2 ofrece mejoras tecnológicas como una pantalla táctil, puertos USB, comunicación Ethernet y compatibilidad con motores electrónicos a través de CAN bus. El documento describe las funciones, componentes, configuraciones y comunicaciones del Telys 2.
This document provides a wiring diagram for Volvo C30, S40 (04-), V50 & C70 (06-) vehicles. It shows the electrical distribution system including fuses, relays, and connectors. Safety warnings are provided for working on systems with airbags or inflatable curtains. The document also includes sections describing data communication networks, abbreviations, harness routing, and a component list.
Case 521 g tier 4b (final) wheel loader service repair manualujfdujjskkekmd
This document is a service manual for the 521G wheel loader. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety instructions are provided at the beginning regarding personal safety, machine safety, and maintenance procedures. The manual then details various components and systems of the wheel loader.
2006 MITSUBISHI TRITON Service Repair Manualjksemmmd
This is the Highly Detailed factory service repair manual for the2006 MITSUBISHI TRITON, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2006 MITSUBISHI TRITON Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Model Covers:
Mitsubishi KA4
Mitsubishi KB4
Mitsubishi KB8
Service Repair Manual Covers:
General
Engine
Engine Mechanical
Engine Lubrication
Intake & Exhaust
Wheel and Tyre
Front Suspension
Rear Suspension
Body
Interior and Supplemental Restraint System
Interior
Chassis Electrical
Controller Area Network (CAN)
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2006 MITSUBISHI TRITON Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Nissan forklift internal combustion f03 series service repair manualfjjskedmme
This document provides an introduction and overview of the service manual for the NISSAN FORKLIFT F03 series. It explains that the manual consists of 21 sections covering various systems of the forklift, including the engine lubrication system. The introduction directs the user to refer to technical bulletins for any changes or revisions to procedures. It also notes that revised sections will replace applicable original sections when changes are made to models or service methods.
The document contains an error code list for an ERGOPOWER EST-37 transmission control unit. It lists various error codes, possible causes, and reactions from the transmission control unit. It also provides steps to repair issues and notes additional details like which operating modes the transmission may enter under certain fault conditions.
Este documento fornece instruções detalhadas para limpeza de carburador. Ele descreve 7 etapas para desmontar e limpar as diferentes partes do carburador, incluindo a parte inferior, cuba, e parte superior. Recomenda-se substituir peças como juntas, anéis de vedação e diafragmas durante o processo de limpeza.
Caterpillar cat 140 h motor grader (prefix xzh) service repair manual (xzh000...fusjefjkksemmd
The document provides instructions for removing the parking brake from a 140H Motor Grader. It is a 26 step process that includes draining transmission oil, removing guards and universal joints, releasing air pressure, and removing bolts, plugs, seals, springs, discs, and other components from the parking brake housing and transmission. Tools required include a transmission jack. Precautions are provided regarding cleaning components and plugging openings to prevent contamination during removal.
Toyota 02 7 fd35 forklift service repair manualsoeldksejdksem
The document provides service information for Toyota forklifts models 7FG/7FD35-45 series, including:
1. An overview of the manual's contents and how to use it, with explanations of terminology and abbreviations.
2. Sections covering removal and installation procedures, disassembly and reassembly, inspection points, and tightening torques for major vehicle systems and components.
3. References other repair manuals needed for servicing engines mounted on the vehicles.
Catalogo de equivalencias para filtros comercializados en colombia, cruce de codigos con premium, franig, valdwin, Chevolet, hyundai, kia, renault, camion.
Case cx330 crawler excavator service repair manualfujsjefkskemm
This document provides instructions for cleaning, inspecting, and replacing various parts when servicing heavy machinery. It emphasizes cleaning all metal parts with solvent and drying thoroughly before lubricating. All parts that show wear or damage should be replaced. Bearings should be cleaned in solvent and air dried, not with compressed air. The instructions also provide safety warnings and procedures for removing and installing the engine.
Hyster f003 (h3.00 js europe) forklift service repair manualfjjsekfksmem
This document provides repair procedures and troubleshooting information for a single speed powershift transmission. It includes instructions for removal, disassembly, inspection, cleaning and assembly of the transmission components. Key steps include removing the transmission from the engine, disassembling the planetary gear carrier, checking clearance and preloads, and reassembling components like the differential, pinion shaft, and control valve.
This is the Highly Detailed factory service repair manual for the2003 IVECO DAILY 3, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2003 IVECO DAILY 3 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Transmission
Propeller Shafts
Rear Axles
Axles
Suspensions
Wheel and Tyres
Steering Gear
Hydro Pneumatic System
Brakes
Bodywork
Chassis Frame
Cab
Air Conditioning
Scheduled Maintenance
Electric System
Electronic System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2003 IVECO DAILY 3 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Macete do tubo do J Duarte - Suzuki Intruder 125 e YesLuis Taborda
O documento descreve como o formato do tubo de ar entre o filtro e o carburador das motos Suzuki 125 afeta o funcionamento do motor, causando falta de torque em baixas rotações e excesso de consumo. Ele explica que afastar o tubo alguns milímetros do carburador corrige esta interferência e melhora o desempenho do motor. Também recomenda regular o nível de gasolina no carburador e ajustar a mistura da marcha lenta após o afastamento do tubo.
Massey ferguson mf 390 tractor, b18008 parts catalogue manualkdidkdkkd
This document provides parts information for an MF 390 tractor engine. It includes:
1) A list of engine parts with part numbers and descriptions
2) Serial number ranges and other specifications for some parts
3) Notes on part replacements and specifications for different countries/models
Caterpillar cat dp40 k forklift lift trucks service repair manual snet19c 000...jfskemsemm
This document provides a service manual for various truck models including GP40K, GP40KL, GP45K, GP50K, DP40K, DP40KL, DP45K, and DP50K. It includes sections on general information, cooling system, electrical system, powertrain, and other major vehicle systems. The general information section provides an overview of the models covered, serial number locations, identification codes, vehicle dimensions, technical specifications, and engine details.
El documento presenta el nuevo controlador Telys 2 de SDMO, que reemplaza al Telys original. El Telys 2 ofrece mejoras tecnológicas como una pantalla táctil, puertos USB, comunicación Ethernet y compatibilidad con motores electrónicos a través de CAN bus. El documento describe las funciones, componentes, configuraciones y comunicaciones del Telys 2.
This document provides a wiring diagram for Volvo C30, S40 (04-), V50 & C70 (06-) vehicles. It shows the electrical distribution system including fuses, relays, and connectors. Safety warnings are provided for working on systems with airbags or inflatable curtains. The document also includes sections describing data communication networks, abbreviations, harness routing, and a component list.
Case 521 g tier 4b (final) wheel loader service repair manualujfdujjskkekmd
This document is a service manual for the 521G wheel loader. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety instructions are provided at the beginning regarding personal safety, machine safety, and maintenance procedures. The manual then details various components and systems of the wheel loader.
2006 MITSUBISHI TRITON Service Repair Manualjksemmmd
This is the Highly Detailed factory service repair manual for the2006 MITSUBISHI TRITON, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2006 MITSUBISHI TRITON Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Model Covers:
Mitsubishi KA4
Mitsubishi KB4
Mitsubishi KB8
Service Repair Manual Covers:
General
Engine
Engine Mechanical
Engine Lubrication
Intake & Exhaust
Wheel and Tyre
Front Suspension
Rear Suspension
Body
Interior and Supplemental Restraint System
Interior
Chassis Electrical
Controller Area Network (CAN)
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2006 MITSUBISHI TRITON Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Nissan forklift internal combustion f03 series service repair manualfjjskedmme
This document provides an introduction and overview of the service manual for the NISSAN FORKLIFT F03 series. It explains that the manual consists of 21 sections covering various systems of the forklift, including the engine lubrication system. The introduction directs the user to refer to technical bulletins for any changes or revisions to procedures. It also notes that revised sections will replace applicable original sections when changes are made to models or service methods.
The document contains an error code list for an ERGOPOWER EST-37 transmission control unit. It lists various error codes, possible causes, and reactions from the transmission control unit. It also provides steps to repair issues and notes additional details like which operating modes the transmission may enter under certain fault conditions.
Este documento fornece instruções detalhadas para limpeza de carburador. Ele descreve 7 etapas para desmontar e limpar as diferentes partes do carburador, incluindo a parte inferior, cuba, e parte superior. Recomenda-se substituir peças como juntas, anéis de vedação e diafragmas durante o processo de limpeza.
Caterpillar cat 140 h motor grader (prefix xzh) service repair manual (xzh000...fusjefjkksemmd
The document provides instructions for removing the parking brake from a 140H Motor Grader. It is a 26 step process that includes draining transmission oil, removing guards and universal joints, releasing air pressure, and removing bolts, plugs, seals, springs, discs, and other components from the parking brake housing and transmission. Tools required include a transmission jack. Precautions are provided regarding cleaning components and plugging openings to prevent contamination during removal.
Toyota 02 7 fd35 forklift service repair manualsoeldksejdksem
The document provides service information for Toyota forklifts models 7FG/7FD35-45 series, including:
1. An overview of the manual's contents and how to use it, with explanations of terminology and abbreviations.
2. Sections covering removal and installation procedures, disassembly and reassembly, inspection points, and tightening torques for major vehicle systems and components.
3. References other repair manuals needed for servicing engines mounted on the vehicles.
Catalogo de equivalencias para filtros comercializados en colombia, cruce de codigos con premium, franig, valdwin, Chevolet, hyundai, kia, renault, camion.
Case cx330 crawler excavator service repair manualfujsjefkskemm
This document provides instructions for cleaning, inspecting, and replacing various parts when servicing heavy machinery. It emphasizes cleaning all metal parts with solvent and drying thoroughly before lubricating. All parts that show wear or damage should be replaced. Bearings should be cleaned in solvent and air dried, not with compressed air. The instructions also provide safety warnings and procedures for removing and installing the engine.
Hyster f003 (h3.00 js europe) forklift service repair manualfjjsekfksmem
This document provides repair procedures and troubleshooting information for a single speed powershift transmission. It includes instructions for removal, disassembly, inspection, cleaning and assembly of the transmission components. Key steps include removing the transmission from the engine, disassembling the planetary gear carrier, checking clearance and preloads, and reassembling components like the differential, pinion shaft, and control valve.
This is the Highly Detailed factory service repair manual for the2003 IVECO DAILY 3, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2003 IVECO DAILY 3 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Transmission
Propeller Shafts
Rear Axles
Axles
Suspensions
Wheel and Tyres
Steering Gear
Hydro Pneumatic System
Brakes
Bodywork
Chassis Frame
Cab
Air Conditioning
Scheduled Maintenance
Electric System
Electronic System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2003 IVECO DAILY 3 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Macete do tubo do J Duarte - Suzuki Intruder 125 e YesLuis Taborda
O documento descreve como o formato do tubo de ar entre o filtro e o carburador das motos Suzuki 125 afeta o funcionamento do motor, causando falta de torque em baixas rotações e excesso de consumo. Ele explica que afastar o tubo alguns milímetros do carburador corrige esta interferência e melhora o desempenho do motor. Também recomenda regular o nível de gasolina no carburador e ajustar a mistura da marcha lenta após o afastamento do tubo.
Massey ferguson mf 390 tractor, b18008 parts catalogue manualkdidkdkkd
This document provides parts information for an MF 390 tractor engine. It includes:
1) A list of engine parts with part numbers and descriptions
2) Serial number ranges and other specifications for some parts
3) Notes on part replacements and specifications for different countries/models
Caterpillar cat dp40 k forklift lift trucks service repair manual snet19c 000...jfskemsemm
This document provides a service manual for various truck models including GP40K, GP40KL, GP45K, GP50K, DP40K, DP40KL, DP45K, and DP50K. It includes sections on general information, cooling system, electrical system, powertrain, and other major vehicle systems. The general information section provides an overview of the models covered, serial number locations, identification codes, vehicle dimensions, technical specifications, and engine details.
Toyota 42 7 fgf25 forklift service repair manualfhjsjejfjskekemm
The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It contains sections on general information, the engine, transmission, and other vehicle systems. The general section provides exterior views of the vehicle, specifications on vehicle models, instructions for using the manual, terminology, and other reference information needed for service and repair.
Toyota 42 7 fgf20 forklift service repair manualfhjsjejfjskekemm
The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It provides information on:
- Exterior views and identification of vehicle models
- How to use the manual, including terminology, abbreviations, and inspection/adjustment procedures
- Procedures for removing and installing the engine, including points of attention
- Inspection and adjustment of engine idle speed and no-load maximum speed
Toyota 42 7 fgf15 forklift service repair manualfhjsjejfjskekemm
The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It contains sections on general information, the engine, transmission, and other vehicle systems. The general section provides exterior views of the vehicle, specifications on vehicle models, instructions for using the manual, terminology, and other reference information needed for service and repair.
Toyota 40 8 fd80n forklift service repair manualfhjsjejfjskekemm
This document provides an overview of periodic maintenance for a forklift, outlining inspection items and periods. It recommends inspecting items like the engine, transmission, and brakes every 6 weeks to 12 months, and measuring, cleaning, lubricating or replacing parts as needed. Tightening bolts is also recommended periodically. The document provides guidance on safety, component weights, lubrication schedules, and other operational and maintenance tips for servicing the forklift.
Toyota 40 8 fd70n forklift service repair manualfhjsjejfjskekemm
The document provides a table outlining the periodic maintenance schedule for a forklift. It lists inspection items, inspection methods (inspection, measurement, retightening, cleaning, lubrication), and recommended inspection periods (every 6 weeks, 3 months, 6 months, etc.). Some key inspection items include engine components, drive components, hydraulic systems, electrical systems, and material handling systems such as forks and masts. The table provides a comprehensive guide for maintaining the forklift on a regular schedule.
Toyota 40 8 fd60n forklift service repair manualfhjsjejfjskekemm
The document provides a table outlining the periodic maintenance schedule for a forklift. It lists inspection items grouped by system (e.g. engine, power transmission, drive system). For each item, it specifies the recommended inspection period in weeks, months, hours of operation, and years. Many items should be inspected during every periodic maintenance interval, while some items are recommended to be inspected less frequently. The table provides guidance on the type of inspection required for each item at each interval, such as inspection (I), measurement (M), retightening (T), cleaning (C), or lubrication (L).
Toyota 40 8 fd50n forklift service repair manualfhjsjejfjskekemm
This document provides an overview of periodic maintenance for a forklift, outlining inspection items and periods. It recommends inspecting items like the engine, transmission, and brakes every 6 weeks, 3 months, 6 months, or 12 months. Measurements and cleaning are also specified for some items. Replacement of parts and fluids are recommended every set number of hours, such as the timing belt at 5,850 hours. Operators should follow this maintenance schedule to keep the forklift in good working order.
Toyota 40 8 fd45n forklift service repair manualfhjsjejfjskekemm
This document provides an overview of periodic maintenance for a forklift, outlining inspection items and periods. It recommends inspecting items like the engine, transmission, and brakes every 6 weeks or 3 months, with more thorough inspections every 6-12 months including measurements and cleaning. Replacement of parts and fluids is also outlined on a periodic basis, such as the timing belt every 4000 hours. Proper disposal of waste fluids and safe jacking points are also discussed.
Toyota 40 8 fd40n forklift service repair manualfhjsjejfjskekemm
The document provides a table outlining the periodic maintenance schedule for a forklift. It lists inspection items grouped by system (e.g. engine, power transmission, drive system). For each item, it specifies the recommended inspection period in weeks, months, hours of operation, and years. Many items should be inspected during every periodic maintenance interval, while some items are recommended to be inspected less frequently. The table provides guidance on the type of inspection required for each item, such as a visual inspection, measurement, tightening, cleaning, or lubrication.
Toyota 40 8 fd35n forklift service repair manualfhjsjejfjskekemm
This document provides an overview of periodic maintenance for a forklift, outlining inspection items and periods. It recommends inspecting items like the engine, transmission, and brakes every 6 weeks to 12 months, and measuring, cleaning, lubricating or replacing parts as needed. Tightening bolts is also recommended periodically. The document provides guidance on inspection methods, noting whether inspection, measurement, retightening, cleaning or lubrication is required for each item at each period.
This document provides an overview of periodic maintenance for a forklift, outlining inspection items and periods. It recommends inspecting items like the engine, transmission, and brakes every 6 weeks or 3 months, with more thorough inspections every 6 or 12 months. Replacement of parts and fluids is also recommended periodically, such as the timing belt every 4000 hours. Proper maintenance is important for safe and reliable operation of the forklift.
This document provides an overview of periodic maintenance requirements for vehicles, including:
- Inspections should be performed every 6 weeks, 3 months, 6 months, and 12 months, covering items like the engine, transmission, brakes, and other components.
- Timing belt replacement is required if the controller or meter is replaced, to ensure proper operation of the warning functions.
- The hour meter maximum is 62,500 hours, so it should be replaced if the timing belt is changed after 58,500 hours.
- Maintenance intervals may appear up to 1 hour early due to limitations of the hour meter.
The document provides a table outlining the periodic maintenance schedule for a forklift. It lists inspection items grouped by system (e.g. engine, power transmission, drive system). For each item, it specifies the recommended inspection period in weeks, months, hours of operation, and years. Many items should be inspected during every routine maintenance interval, while some require less frequent inspection. The goal is to inspect all items safely and properly maintain each system of the forklift.
This document provides an overview of periodic maintenance for a forklift, outlining inspection items and periods. It recommends inspecting items like the engine, transmission, and brakes every 6 weeks, 3 months, 6 months, or 12 months. Measurements and cleaning are also specified periodically. Replacement of parts and fluids like the timing belt, filters, and lubricants are noted as required based on operating hours. Proper disposal of waste fluids and safe jacking points are also covered.
Massey ferguson mf4265 tractor (br) parts catalogue manualfhjsjejfjskekemm
This document provides an overview of parts and components for a Massey Ferguson MF 4265 tractor, organized by system and sub-system. It includes detailed part numbers, descriptions, quantities and other specifications for elements of the engine, fuel system, axles, drive train, hydraulics, electrical system, platform, chassis, wheels, implement drive system, and accessories. The sections provided here focus on specific engine components such as the water pump, starter motor, short engine, cylinder block, crankshaft, piston, connecting rod, crankshaft oil seal, cylinder head, rocker, and timing gear and camshaft.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
1. SERVICE MANUAL
TOYOTA 7FDF/FGF 15-35
BT Svenska AB
Per WärmlundPer WärmlundPer WärmlundPer WärmlundPer Wärmlund
NAME SECTION
GENERAL
ENGINE
TRANSMISSION
0
1
2
PROPELLER SHAFT
DIFFERENTIAL
FRONT AXLE
REAR AXLE
STEERING
BRAKE
BODY
MATERIAL HANDLING SYSTEM
MAST
CYLINDER
OIL PUMP
OIL CONTROL VALVE
SAS
APPENDIX
3
4
5
6
7
8
9
10
11
12
13
14
15
16
INDEX
< Tillbaka till Index
2. 0-1
0GENERAL
Page
EXTERIOR VIEWS......................................................... 0-2
VEHICLE MODEL .......................................................... 0-3
FRAME NUMBER........................................................... 0-4
HOW TO USE THIS MANUAL .................................... 0-5
EXPLANATIONMETHOD ................................................. 0-5
TERMINOLOGY................................................................ 0-6
ABBREVIATIONS ............................................................. 0-6
OPERATIONAL TIPS .................................................... 0-7
HOISTING THE VEHICLE ............................................ 0-8
CIRCUIT TESTER.................................................. 0-9
STANDARD BOLT & NUT TIGHTENING
TORQUE ....................................................................... 0-11
BOLT STRENGTH TYPE IDENTIFICATION METHOD ...... 0-11
TIGHTENING TORQUE TABLE ........................................ 0-12
PRECOAT BOLTS ......................................................... 0-13
HIGH PRESSURE HOSE FITTING
TIGHTENING TORQUE ............................................ 0-13
WIRE ROPE SUSPENSION ANGLE LIST ............... 0-14
SAFE LOAD FOR EACH WIRE ROPE
SUSPENSION ANGLE............................................... 0-14
COMPONENTS WEIGHT............................................. 0-15
RECOMMENDED LUBRICANT
QUANTITY & TYPES ................................................. 0-16
SMÖRJSCHEMA ........................................................... 0-18
PERIODISKT UNDERHÅLL ........................................ 0-19
UTBYTE AV SMÖRJMEDEL
OCH DELAR ................................................................. 0-25
5. 0-4
FRAME NUMBER
Frame No. Punching Position
Punching position
Series
1 ton series
2 ton series
3 ton, J3.5 ton series
Engine
4Y
1DZ-II
4Y
2Z
1DZ-II
4Y
2Z
1DZ-II
Vehicle model
42-7FGF15
42-7FGF18
02-7FDF15
02-7FDF18
42-7FGF20
42-7FGF25
02-7FDF20
02-7FDF25
62-7FDF20
62-7FDF25
02-7FGF30
02-7FGJF35
02-7FDF30
02-7FDJF35
62-7FDF30
Punching format
407FGF18 10011
7FDF18 10011
407FGF25 10011
7FDF25 10011
607FDF25 10011
7FGJF35 10011
7FDJF35 10011
607FDF30 10011
6. 0-5
HOW TO USE THIS MANUAL
EXPLANATIONMETHOD
1. Operation procedure
(1) The operation procedure is described in either pattern A or pattern B below.
Pattern A: Explanation of each operation step with illustration.
Pattern B: Explanation of operation procedure by indicating step numbers in one illustration, fol-
lowed by explanation of cautions and notes summarized as point operations.
Example of description in pattern B
DISASSEMBLY·INSPECTION·REASSEMBLY Tightening torque unit T = N·m (kgf-cm) [ft-lbf]
DisassemblyProcedure
1 Remove the cover. [Point 1]
2 Remove the bushing [Point 2] Operation explained later
3 Remove the gear.
Point Operations Explanation of key point for operation with an illustration
[Point 1]
Disassembly: Put a match mark when removing the pump cover.
[Point 2]
Inspection: Measure the bush inside diameter.
Limit: 19.12 mm (0.7528 in)
• Step Nos. are partially sometimes
omitted in illustrations.
• When a part requiring tightening
torque instruction is not indicated in
the illustration, the part name is de-
scribed in the illustration frame.
T = 46.1 ~ 48.1
(470 ~ 490)
[34.0 ~ 35.5]
7. 0-6
Abbreviation (code)
ASSY
LH
LLC
M/T
NMR
OPT
O/S
PS
RH
SAE
2. How to read components figures (Example)
(1) The components figure uses the illustration
in the parts catalog for the vehicle model.
Please refer to the catalog for checking the
part name.
The number at the right shoulder of each
components figure indicates the Fig. num-
ber in the parts catalog.
3. Matters omitted in this manual
(1) This manual omits description of the following jobs, but perform them in actual operation:
Cleaning and washing of removed parts as required
Visual inspection (partially described)
TERMINOLOGY
Caution:
Important matters of which negligence may cause accidents. Be sure to observe them.
Note:
Important items of which negligence may cause accidents, or matters in operation procedure
requiring special attention.
Standard: Values showing allowable range in inspection and adjustment.
Limit: Maximum or minimum allowable value in inspection or adjustment.
ABBREVIATIONS
Meaning
System of active stability
Special service tool
Standard
Tightening torque
Torque converter &
transmission
Number of teeth ( )
Undersize
With
Less
Meaning
Assembly
Left hand
Long life coolant
Manual transmission
No-load maximum
speed
Option
Oversize
Power steering
Right hand
Society of Automotive
Engineers (USA)
Abbreviation (code)
SAS
SST
STD
T =
T/C
T
U/S
W/
L/
-
FIG number in parts catalog
3201
8. 1-8
REMOVAL•••••INSTALLATION T = N•••••m (kgf-cm) [ft-lbf]
ENGINE ASSY
Engine mounting nut
End plate set bolt
Drive plate set bolt (for connecting engine crankshaft)
Drive plate set bolt (for connecting torque converter)
Torque converter housing set bolt
T = 53.9 ~ 99.0 (550 ~ 1010) [39.8 ~ 73.1]
T = 49.0 ~ 78.5 (500 ~ 800) [36.2 ~ 57.9]
4Y: T = 56.9 ~ 64.7 (580 ~ 660) [42.0 ~ 47.7]
1DZ-II•2Z: T = 76.5 ~ 93.2 (780 ~ 950) [56.4 ~ 68.7]
T = 14.7 ~ 21.6 (150 ~ 220) [10.9 ~ 15.9]
T = 29.4 ~ 44.1 (300 ~ 450) [21.7 ~ 32.6]
9. 1-9
Removal Procedure
1 Remove the engine hood. (See p. 9-5.)
2 Remove the toe board.
3 Drain coolant.
4 Remove the battery and battery tray.
5 Remove the relay block and electrical parts plate set bolts to free them.
6 Disconnect the accelerator wire and fuel hose. [Point 1]
7 Diesel Vehicle:
Remove the sedimenter bracket set bolt to free the bracket.
8 Disconnect connectors and wiring harness clamps around the engine.
9 Disconnect the torque converter cooler hose. [Point 2]
10 Remove the radiator.
11 Disconnect the air cleaner hose.
12 Remove the oil pump set bolts to free the pump.
13 Disconnect the exhaust pipe.
14 Disconnect the wiring from the starting motor.
15 Remove the under cover.
16 Remove the cover plate.
17 Remove 6 drive plate set bolts.
18 Remove the engine ASSY mounting nuts.
19 Slightly hoist the engine. [Point 3]
20 Support the torque converter housing with wooden blocks.
21 Separate the torque converter housing and engine. [Point 4]
22 Remove the engine ASSY with drive plate and torque converter end plate.
23 Remove the drive plate.
24 Remove the torque converter end plate.
25 Remove the starting motor.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
Note:
••••• Apply sealant (08833-00080) before tightening the drive plate set bolt (for connecting engine
crankshaft).
••••• Bleed air from the fuel system after installation of the engine ASSY. (For diesel vehicle) (See p.
1-11.)
10. 1-10
Point Operations
[Point 1]
Removal:
Put a match marks on the fuel hose and the coupler.
[Point 2]
Removal:
Put a match mark on the radiator and torque converter
cooler hose.
[Point 3]
Removal•Installation:
SST 09010-20111-71 ---
09010-23320-71 ---
Removal:
Tentatively hoist up until the mounting bolt completely
comes out from the hole in the frame.
[Point 4]
Removal:
Use a straight-edge screwdriver for separation. If the fit-
ting is too tight, change the SST hook position and adjust
the engine angle for easier separation.
SST
SST
11. 1-11
AIR BLEEDING FROM FUEL SYSTEM
(DIESEL VEHICLE)
1. Operate the hand pump of the fuel filter until the pump
operating force becomes heavy.
ENGINE SPEED INSPECTION AND ADJUSTMENT
Note:
Warm up the engine, set the vehicle to the following conditions, and conduct inspection and ad-
justment.
Coolant temperature: 80°°°°°C (176°°°°°F) or more, engine oil: 70°°°°°C (158°°°°°F) or more, operating oil tem-
perature: 50°°°°°C (122°°°°°F) or more, auto choke in release state (4Y engine)
4YENGINE
Idling speed and idle up speed inspection and adjust-
ment
<Gasoline Vehicle>
1. Install the engine speedometer.
2. Disconnect the idle up actuator and inspect the idle up
speed.
Standard: 1000 ± 30 rpm
3. If the measured value is out of the specified range, ad-
just by turning adjusting screw B.
4. Connect the idle up actuator.
5. Check the idling speed.
Standard: 750 rpm
6. If the measured value is out of the specified range, ad-
just by adjusting screw A.
7. If the speed is still higher after adjustment in 3 above,
adjust using the following procedure:
A
B
Actuator
hose
+ 50
-0
12. 1-12
(1) If the auto choke cam is contacting although the cool-
ant temperature is as specified above, replace the
auto choke.
(2) If the idle up actuator rod and adjusting screw B are
in contact with each other, turn adjusting screw B coun-
terclockwise.
<LPG/Gasoline or LPG>
1. Install the engine speedometer.
2. Disconnect the idle up actuator and inspect the idle up
speed.
Standard:
LPG/Gasoline: 1000 ± 30 rpm
Actuator
hose
B
B
B
Actuator
hose
LPG/Gasoline
Actuator
hose
LPG
LPG: 1400 ± 30 rpm
LPG (France spec.): 1400 ± 30 rpm
3. If the measured value is out of the specified
range, adjust by turning adjusting screw B.
Loosen the lock nut before adjustment in
case of the LPG engine vehicle (France
spec.).
4. Connect the idle up actuator.
Lock nut
B
5. Check the idling speed.
Standard:
LPG/Gasoline: 750 rpm
LPG: 800 rpm
LPG (France spec.) : 750 rpm
+ 50
- 0
+ 50
- 0
+ 50
- 0
LPG (France spec.)
13. 1-13
A
Regulator
LPG carburetor
B
C
6. If the measured value is out of the specified range, make
adjustment according to the following procedure:
(1) Make adjustment by turning adjusting screw B (LPG
vehicle) or C (LPG/gasoline vehicle).
(If less than the standard, turn adjusting screw A coun-
terclockwise beforehand.)
(2) Slowly turn adjusting screw A clockwise or counter-
clockwise until the maximum speed is obtained.
(3) Determine the positions of adjusting screws B and C
by repeating steps (1) and (2) until the value obtained
in step (2) satisfies the standard.
(4) Slowly turn adjusting screw A clockwise until the CO
concentration becomes 2 to 3%, and then turn it 45
degrees counterclockwise from the position where the
speed begins to drop.
E
D
LPG (France spec.)
(1) Make adjustment by turning adjusting screw D (LPG
vehicle).
(If less than the standard, turn adjusting screw E clock-
wise beforehand.)
(2) Determine the position of adjusting screw D by re-
peating step (1) until the value obtained in step (1) sat-
isfies the standard.
(3) Slowly turn adjusting screw E counter-clockwise until
the CO concentration becomes 2 to 3%, and then turn
it 45 degrees counterclockwise from the position where
the speed begins to drop.
No-load Maximum Speed Inspection••••• Adjustment
<Gasoline, LPG or LPG/Gasoline Vehicle>
1. Install the engine speedometer.
2. Inspect and adjust the no-load static maximum speed.
(1) Measure the speed when the accelerator pedal is fully
depressed.
Standard:
4Y engine:
1•2 ton series: ...................... 2600 ± 50 rpm
3• J3.5 ton series: ................. 2800 ± 50 rpm
(2) If the measured value does not satisfy the standard,
make adjustment as follows:
Remove the seal and loosen the lock bolt.
Fully depress the accelerator pedal.
Turn the bushing for adjustment, while holding the
adjusting screw of the air governor immovable with
a straight-edge screwdriver.
Lock bolt
Fix.
Adjusting screw
Bushing
14. 1-14
3. Check and adjust relief down.
(1) Operate the tilt lever fully backward with the engine
running at the maximum speed, and measure the de-
crease in speed (relief down) upon full relief.
Standard: Within 300 rpm
Tilt lever
(2) If the measured value is out of the standard range,
make adjustment according to the following proce-
dure:
Turn the adjusting screw counterclockwise to de-
crease relief down.
Return the screw by 1/10 of a turn to eliminate twist-
ing of the spring in the air governor.
Adjust the no-load maximum speed.
Repeat steps , and until the measured value
satisfies the standard.
4. Check and adjust hunting.
(1) Check for hunting upon tilt relief at the no-load maxi-
mum speed.
(2) If hunting occurs a few times or more, make adjust-
ment according to the following procedure:
Turn the adjusting screw clockwise by 1/2 of a turn
or more.
Return the screw counterclockwise by 1/4 of a turn.
Finally, turn it by 1/10 of a turn to eliminate twisting
of the spring in the air governor.
Adjust the no-load maximum speed.
Repeat steps through until hunting occurs no
more.
5. Repeat adjustments in steps 2 to 4 until respective stan-
dards are satisfied.
6. Seal the lock bolt.
15. 1-15
1DZ-II•••••2Z ENGINE
Idle Speed Inspection•••••Adjustment
1. Install the engine speedometer.
2. Check the idle speed.
Standard: 750 ± 25 rpm
3. If the measured value is out of the standard, loosen the
lock nut and make adjustment by turning adjusting screw
A.
No-load Maximum Speed Inspection•••••Adjustment
1. Install the engine speedometer.
2. Inspect and adjust the no-load maximum speed.
(1) Measure the speed when the accelerator pedal is fully
depressed.
Standard:
1DZ-II engine:
1 ton series: .................... 2600 ± 50 rpm
Vehicle speed control
system spec.: .............. 2600 ± 50 rpm
2• 3 ton series: ................. 2800 ± 50 rpm
2Z engine: ........................... 2400 ± 50 rpm
(2) If the measured value does not satisfy the standard ,
make adjustment as follows:
Remove the seal and loosen the lock nut.
Make adjustment by turning adjusting screw B.
3. Check and adjust relief down.
(1) Operate the tilt lever fully backward with the engine
running at the maximum speed and measure the de-
crease in speed (relief down) upon full relief.
Standard: Within 200 rpm
4. Seal the adjusting screws after the end of adjustment.
A
B
Tilt lever
16. 1-16
AIR CLEANER
SPECIFICATIONS
Type
Size
Intake type
Filtering area cm2
(in2
)
Others
Single (STD)
Cyclone type
7-inch
Fresh air introduction type
14600 (2263)
With evacuator valve
Double (OPT)
←
←
←
Outer: 18600 (2883)
Inner: 510 (79.1)
←
COMPONENTS
1703
17. 1-17
AIR CLEANER CLEANING••••• INSPECTION
1. Open the engine hood.
2. Remove the element.
Note:
In case of the double element type (OPT), do not remove
the inner element for other than replacement.
3. Clean the element.
(1) For ordinary cleaning, blow with compressed air [690
kPa (7kgf/cm2
) [100 psi] or less] vertically along the
pleats from the inside of the element.
If heavily contaminated, washing is possible.
(2) Element washing method
Dissolve neutral detergent in tepid water (approx. 40°C
(104°F)) and immerse the element in it for about 30
minutes. Then, rinse the element well with clear wa-
ter. [Water pressure: 275 kPa (2.8 kgf/cm2
) [40 psi] or
less]
After washing, naturally dry the element or dry the
element with a dryer (cold air).
Note:
••••• Do not damage the element during washing.
••••• Never use compressed air or hot air for drying.
4. Clean the evacuator valve (dust discharge valve).
(1) Hold the tip end of the evacuator valve and discharge
dust and dirt from the inside of the valve.
5. Inspect the element.
(1) After cleaning, place an electric bulb in the element to
inspect any damage in the element. If any pinhole,
tear or damage is found, replace it with a new ele-
ment.
6. Element replacement
Replace the element after it is washed six times or gen-
erally at intervals of 12 months.
Vehicle without
vehicle speed
control system
7. Install the element.
(1) Install the evacuator valve in the illustrated direction.
Vehicle with
vehicle speed
control system
60°
25°
18. 1-18
CLOGGING WARNING SYSTEM INSPECTION
1. Warning lamp inspection
(1) See that the air cleaner warning lamp comes on when
the ignition switch is turned ON and goes out when
the engine starts.
2. Individual inspection
(1) Use a mity vac to apply a negative pressure to the
vacuum switch, and inspect conduction.
Standard
Gasoline models:
2942 ± 294 Pa (300 ± 30 mm H2O)
(22.1 ± 2.2 mmHg) [11.81 ± 1.18 in H2O]
[0.870 ± 0.087 in Hg]: Conduction
Diesel models:
7473 ± 569 Pa (762 ± 58 mm H2O)
(56.0 ± 4.3 mmHg) [30.00 ± 2.28 in H2O]
[2.205 ± 0.169 in Hg]: Conduction
RADIATOR
COMPONENTS
1603
19. 1-19
Total
amount of
coolant
7.4 (1.95)
5.9 (1.56)
9.3 (2.46)
8.3 (2.19)
9.0 (2.37)
9.5 (2.51)
8.2 (2.16)
8.8 (2.32)
9.5 (2.51)
8.8 (2.32)
SPECIFICATIONS
Type Crossflow
Fin type Corrugated fin
Coolant capacity (in radiator) See the table below
Cap opening pressure kPa (kgf/cm2
) [psi] 88 ± 14.7 (0.9 ± 0.15) [13 ± 2.1]
Others Built in torque converter cooler (torque converter model)
COOLANT CAPACITY AND ANTIFREEZE TABLE Unit: (US gal)
Radiator
capacity
2.5 (0.66)
2.5 (0.66)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
LLC mixing
ratio at 30%
(to - 15°C
(5°F))
2.2 (0.58)
1.8 (0.48)
2.8 (0.74)
2.5 (0.66)
2.7 (0.71)
2.9 (0.77)
2.5 (0.66)
2.6 (0.69)
2.9 (0.77)
2.6 (0.69)
LLC mixing
ratio at 50%
(to - 35°C
(- 31°F))
3.7 (0.98)
3.0 (0.79)
4.7 (1.24)
4.2 (1.11)
4.5 (1.19)
4.8 (1.27)
4.1 (1.08)
4.4 (1.16)
4.8 (1.27)
4.4 (1.16)
Antirust
mixing at
5%
0.4 (0.11)
0.3 (0.08)
0.5 (0.13)
0.4 (0.11)
0.5 (0.13)
0.5 (0.13)
0.4 (0.11)
0.4 (0.11)
0.5 (0.13)
0.4 (0.11)
4Y
1DZ-II
4Y
1DZ-II
2Z
4Y
1DZ-II
2Z
4Y
2Z
1 ton series
2 ton series
3 ton series
J3.5 ton series
Note:
••••• The total amount of coolant does not include the capacity of the reservoir tank.
••••• Reservoir tank capacity: 0.6 (0.16 US gal) (at FULL mark position)
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 1-21
REMOVAL•••••INSTALLATION
Note:
The muffler can be removed by either of the two methods shown below.
Remove the muffler after removing the counterweight.
Remove the muffler after removing the radiator W/counterweight.
Here, method is explained.
Removal Procedure
1 Remove the counterweight. (See p. 9-6.)
2 Disconnect the exhaust pipe.
3 Remove the muffler W/tail pipe.
4 Disconnect the tail pipe from the muffler.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
CATALYTIC MUFFLER MAINTENANCE
Replace the muffler ASSY every year (2000 hours) on either the gasoline or diesel engine vehicle.
3
2