The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It contains sections on general information, the engine, transmission, and other vehicle systems. The general section provides exterior views of the vehicle, specifications on vehicle models, instructions for using the manual, terminology, and other reference information needed for service and repair.
Toyota 7 fgcu25 forklift service repair manualudjjjskkdmme
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
Toyota 40 6 fg18 forklift service repair manualjfskemsemm
This manual provides service procedures for the Toyota Forklift 6FG10-30 series. It covers models from January 1994 and their corresponding engines. The manual notes that designs may have changed, requiring updates from Toyota. It directs the user to additional engine manuals for service procedures on mounted engines. An index lists the sections of the manual, which include general information, the engine, transmission, axles, steering, body, and maintenance components.
Toyota 02-6FG15 Forklift Service Repair Manualjksmemfmd
This is the Highly Detailed factory service repair manual for theTOYOTA 02-6FG15 FORKLIFT , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 02-6FG15 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Foreword
Section Index
General
Clutch
Torque Converter
Transmission
Propeller Shaft
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handing System
Mast
Cylinder
Oil Pump
Oil Control Valve
Appendix
Wire Diagrams
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 02-6FG15 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Toyota 30 5 fbc18 battery forklift service repair manualfhsjekdmme
This document provides service information for the Toyota Battery Forklift 5FBC13 - 30 Series. It contains sections on the battery, control circuit, electrical system troubleshooting, and other major vehicle systems. The foreword states that the manual covers service procedures for the specified forklift models as of November 1991 and notes that actual vehicles may differ from the descriptions due to design changes. It also directs the user to Toyota publications for any updates to specifications or procedures.
This is the Highly Detailed factory service repair manual for theTOYOTA 7FGCU18 FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 7FGCU18 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Torque Converter and Transmission
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
SAS
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 7FGCU18 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Toyota Forklift 8FGCU30 Service Repair Manualfusjejfjwksekmm
This is the Highly Detailed factory service repair manual for theTOYOTA FORKLIFT 8FGCU30, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA FORKLIFT 8FGCU30 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine – Chassis
4Y – E Repair
1DZ – II Repair
4Y – E LPG Device Repair
Transmission (Pn1•2•3 / Cu2•3)
Transmission (Cu 1 Ton Series)
Propeller Shaft
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
Mini Lever – Joystick
SAS / OPS
SSTLIST – Service Standards List
Multifunction Display DX (Optional)
Electrical System Troubleshooting (except Cu1)
Electrical System Troubleshooting (Cu1 ton Series)
Wiring Diagram
Service Information Bulletins
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA FORKLIFT 8FGCU30 Service Repair Workshop Manual.
Thanks for visiting!
Toyota 02 7 fga50 forklift service repair manualudfjjsjekdkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
Toyota 62 7 fdf20 forklift service repair manualudjjjskekdmdm
The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It provides information on:
- Exterior views and identification of vehicle models
- How to use the manual, including terminology, abbreviations, and inspection/adjustment procedures
- Procedures for removing and installing the engine, including points of attention
- Inspection and adjustment of engine idle speed and no-load maximum speed
Toyota 7 fgcu25 forklift service repair manualudjjjskkdmme
This manual covers service procedures for Toyota forklifts with pneumatic and cushion tires. It details removal and installation procedures, inspection methods, and adjustments for various components. Reference manuals are also listed for engines and other relevant components. The manual provides specifications, torque values, and other technical information needed for repair and maintenance of these vehicles.
Toyota 40 6 fg18 forklift service repair manualjfskemsemm
This manual provides service procedures for the Toyota Forklift 6FG10-30 series. It covers models from January 1994 and their corresponding engines. The manual notes that designs may have changed, requiring updates from Toyota. It directs the user to additional engine manuals for service procedures on mounted engines. An index lists the sections of the manual, which include general information, the engine, transmission, axles, steering, body, and maintenance components.
Toyota 02-6FG15 Forklift Service Repair Manualjksmemfmd
This is the Highly Detailed factory service repair manual for theTOYOTA 02-6FG15 FORKLIFT , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 02-6FG15 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Foreword
Section Index
General
Clutch
Torque Converter
Transmission
Propeller Shaft
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handing System
Mast
Cylinder
Oil Pump
Oil Control Valve
Appendix
Wire Diagrams
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 02-6FG15 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Toyota 30 5 fbc18 battery forklift service repair manualfhsjekdmme
This document provides service information for the Toyota Battery Forklift 5FBC13 - 30 Series. It contains sections on the battery, control circuit, electrical system troubleshooting, and other major vehicle systems. The foreword states that the manual covers service procedures for the specified forklift models as of November 1991 and notes that actual vehicles may differ from the descriptions due to design changes. It also directs the user to Toyota publications for any updates to specifications or procedures.
This is the Highly Detailed factory service repair manual for theTOYOTA 7FGCU18 FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA 7FGCU18 FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Torque Converter and Transmission
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
SAS
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA 7FGCU18 FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Toyota Forklift 8FGCU30 Service Repair Manualfusjejfjwksekmm
This is the Highly Detailed factory service repair manual for theTOYOTA FORKLIFT 8FGCU30, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA FORKLIFT 8FGCU30 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine – Chassis
4Y – E Repair
1DZ – II Repair
4Y – E LPG Device Repair
Transmission (Pn1•2•3 / Cu2•3)
Transmission (Cu 1 Ton Series)
Propeller Shaft
Differential
Front Axle
Rear Axle
Steering
Brake
Body
Material Handling System
Mast
Cylinder
Oil Pump
Oil Control Valve
Mini Lever – Joystick
SAS / OPS
SSTLIST – Service Standards List
Multifunction Display DX (Optional)
Electrical System Troubleshooting (except Cu1)
Electrical System Troubleshooting (Cu1 ton Series)
Wiring Diagram
Service Information Bulletins
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA FORKLIFT 8FGCU30 Service Repair Workshop Manual.
Thanks for visiting!
Toyota 02 7 fga50 forklift service repair manualudfjjsjekdkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
Toyota 62 7 fdf20 forklift service repair manualudjjjskekdmdm
The document is a service manual for Toyota 7FDF/FGF 15-35 vehicles. It provides information on:
- Exterior views and identification of vehicle models
- How to use the manual, including terminology, abbreviations, and inspection/adjustment procedures
- Procedures for removing and installing the engine, including points of attention
- Inspection and adjustment of engine idle speed and no-load maximum speed
This document contains parts lists and specifications for an engine. It includes lists of parts for the complete engine, crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod and bearings, crankshaft, crankshaft pulley wheel, flywheel, cylinder head, cylinder head cover, and valves. Each part is specified by number, description, dimensions, and quantity.
This document provides parts information for an ARION 500 HEXASHIFT stage IIIb engine. It includes 3 pages of documentation for the cylinder head assembly, listing 20 parts including the cylinder head, gasket, end piece, sleeves, locks, rings, and screws. Preceding pages provide documentation on additional engine assemblies.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a74...dujjsjekkkdmm
The document provides parts lists and descriptions for engine components for ARION 500-600 Stage IV HEXASHIFT machines. It includes lists of parts needed for the crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston assemblies. The parts lists reference part numbers, descriptions, dimensions, and quantities of components needed for different machine types, including the A74 and A76 models.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a76...dujjsjekkkdmm
The document provides parts lists for engines in the ARION 500-600 Stage IV HEXASHIFT machine series. It includes lists of parts for the complete engine, crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston. The parts lists contain the part numbers, descriptions, quantities, and other specifications for each component. The lists are provided for two different machine types within the series.
Claas arion 460 430 stage iv tractor parts catalogue manual (sn a4300010-a430...dujjsjekkkdmm
This document provides parts lists and specifications for engines in the Arion 460-430 Stage IV product line. It includes 4 engine options with power ratings ranging from 105 to 135 horsepower that meet ECE R120 emissions standards. The parts lists cover components of the crankcase, timing case, flywheel housing, oil pan, cylinder liner and piston, connecting rod, crankshaft, cylinder head, and cylinder head cover. Tolerances and engine number applicability ranges are provided for some part numbers.
Claas arion 460 410 stage iv mr tractor parts catalogue manual (sn a5300010-a...dujjsjekkkdmm
This document contains parts lists and specifications for engine components for an ARION 460-410 Stage IV MR agricultural tractor. It includes lists of engine parts such as cylinders, pistons, connecting rods, crankshafts, pulleys, and other components. Specifications are provided for different engine options varying in horsepower ratings between 67KW and 103KW. Precision measurements are listed for bearing clearances for various engine component options.
Claas arion 460 410 stage iv mr tractor parts catalogue manual (sn a5200010-a...dujjsjekkkdmm
This document contains parts lists and specifications for engine components for an ARION 460-410 Stage IV MR agricultural tractor. It includes lists of engine parts like cylinders, pistons, connecting rods, crankshafts, pulleys, and other components. Specifications are provided for different part numbers, dimensions, quantities, and remarks about standard or non-standard designs.
Claas arion 430 410 tractor parts catalogue manual (sn a2100050-a219999)dujjsjekkkdmm
This document provides parts information for an ARION 430-410 engine. It includes 4 pages listing engine part numbers, descriptions, dimensions and quantities. The document contains specifications for complete engine configurations with and without a 10hp compressor. It also includes sections for individual engine components like the crankcase, timing case, cylinder head and more.
This document provides parts lists and specifications for engines. It includes four pages listing parts by number for the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner/piston, connecting rod/bearings, crankshaft, crankshaft pulley wheel, and flywheel. Each part is specified by number, description, dimensions, quantity, and any additional conditions. A key is provided explaining homologation codes mentioned in the conditions.
This document provides parts lists and specifications for engines. It includes:
1) Lists of engine parts with part numbers, descriptions, quantities and additional details like dimensions or conditions.
2) The parts are grouped into categories like crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, flywheel etc.
3) Additional information is provided for some parts like homologation types, machine numbers, remarks on dimensions or specifications.
This document provides parts lists and specifications for engines. It includes:
1) Lists of engine parts with part numbers, descriptions, quantities and additional details like dimensions or conditions.
2) The parts are grouped into categories like crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, flywheel etc.
3) Additional information is provided for some parts to specify homologation types, dimensions, machine numbers or remarks.
1) This document provides part numbers, descriptions, dimensions and quantities for various engine components for an ARES 836-816 RZ QUADRISHIFT engine. It includes sections for the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner/piston, connecting rod/bearings, crankshaft, pulley wheel and flywheel.
2) Each component lists the part number, description, any relevant dimensions and the quantity required. Additional information includes homologation types, machine numbers and remarks about specifications.
3) The document contains detailed technical specifications for replacement parts for the ARES 836-816 RZ QUADRISHIFT engine across different
This document provides parts lists and specifications for engine components. It includes 3 pages listing parts for a crankcase assembly, including part numbers, descriptions, quantities and specifications. It also includes 3 pages listing parts for a timing case assembly, including the same details. All parts are specified for specific engine models and configurations.
1) The document provides parts lists and descriptions for various engine components for an ARES 720-710 RZ engine, including the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, crankshaft pulley wheel, and flywheel.
2) It lists each part number, description, quantity, and any additional conditions or remarks for over 100 individual parts across 16 assemblies.
3) The parts lists include gaskets, seals, bolts, washers, valves, bearings, and other components, with notes on applicability based on engine serial number ranges.
1) The document provides parts lists and descriptions for various engine components for an ARES 720-710 RZ engine, including the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, crankshaft pulley wheel, and flywheel.
2) It lists each part number, description, quantity, and any additional conditions or remarks for over 100 individual parts across 16 assemblies.
3) The parts lists include gaskets, seals, bolts, washers, valves, bearings, and other components, along with specifications and homologation details for certain parts.
Toyota 7 fd45 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
Toyota 7 fd40 forklift service repair manualdujjsjekkkdmm
The document provides service procedures for removing and servicing a torque converter and transmission assembly. Key steps include draining the torque converter oil, removing the pilot boss, snap ring, and torque converter. Disassembly of the torque converter involves removing the flexible plate, drive cover, turbine runner, thrust bearing, stator, and pump boss. Inspection and measurements of various components are specified. Reassembly follows the reverse order of disassembly. Tightening torques are provided for multiple fasteners.
Toyota 7 fd35 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly and inspection of the transmission assembly. Procedures are outlined in steps and key points are called out, along with torque specifications and other technical details. References are also provided for engine repair manuals related to servicing the mounted engine.
Toyota 02 7 fg45 forklift service repair manualdujjsjekkkdmm
The document provides service procedures for removing and servicing a torque converter and transmission assembly. Key steps include draining the torque converter oil, removing the pilot boss, snap ring, and torque converter. Disassembly of the torque converter involves removing the flexible plate, drive cover, turbine runner, thrust bearing, stator, and pump boss. Inspection and measurements of various components are described. Reassembly is the reverse of removal. Tightening torques are provided for multiple fasteners.
Toyota 02 7 fg40 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly and inspection of the transmission assembly. Key steps and points of attention are highlighted for each procedure. Reference manuals for related engine repair are also listed. The document aims to provide technicians with information to correctly service the transmission systems of the forklift models covered.
This document contains parts lists and specifications for an engine. It includes lists of parts for the complete engine, crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod and bearings, crankshaft, crankshaft pulley wheel, flywheel, cylinder head, cylinder head cover, and valves. Each part is specified by number, description, dimensions, and quantity.
This document provides parts information for an ARION 500 HEXASHIFT stage IIIb engine. It includes 3 pages of documentation for the cylinder head assembly, listing 20 parts including the cylinder head, gasket, end piece, sleeves, locks, rings, and screws. Preceding pages provide documentation on additional engine assemblies.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a74...dujjsjekkkdmm
The document provides parts lists and descriptions for engine components for ARION 500-600 Stage IV HEXASHIFT machines. It includes lists of parts needed for the crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston assemblies. The parts lists reference part numbers, descriptions, dimensions, and quantities of components needed for different machine types, including the A74 and A76 models.
Claas arion 500 600 stage iv hexashift tractor parts catalogue manual (sn a76...dujjsjekkkdmm
The document provides parts lists for engines in the ARION 500-600 Stage IV HEXASHIFT machine series. It includes lists of parts for the complete engine, crankcase, timing case, flywheel housing, oil pan, and cylinder liner and piston. The parts lists contain the part numbers, descriptions, quantities, and other specifications for each component. The lists are provided for two different machine types within the series.
Claas arion 460 430 stage iv tractor parts catalogue manual (sn a4300010-a430...dujjsjekkkdmm
This document provides parts lists and specifications for engines in the Arion 460-430 Stage IV product line. It includes 4 engine options with power ratings ranging from 105 to 135 horsepower that meet ECE R120 emissions standards. The parts lists cover components of the crankcase, timing case, flywheel housing, oil pan, cylinder liner and piston, connecting rod, crankshaft, cylinder head, and cylinder head cover. Tolerances and engine number applicability ranges are provided for some part numbers.
Claas arion 460 410 stage iv mr tractor parts catalogue manual (sn a5300010-a...dujjsjekkkdmm
This document contains parts lists and specifications for engine components for an ARION 460-410 Stage IV MR agricultural tractor. It includes lists of engine parts such as cylinders, pistons, connecting rods, crankshafts, pulleys, and other components. Specifications are provided for different engine options varying in horsepower ratings between 67KW and 103KW. Precision measurements are listed for bearing clearances for various engine component options.
Claas arion 460 410 stage iv mr tractor parts catalogue manual (sn a5200010-a...dujjsjekkkdmm
This document contains parts lists and specifications for engine components for an ARION 460-410 Stage IV MR agricultural tractor. It includes lists of engine parts like cylinders, pistons, connecting rods, crankshafts, pulleys, and other components. Specifications are provided for different part numbers, dimensions, quantities, and remarks about standard or non-standard designs.
Claas arion 430 410 tractor parts catalogue manual (sn a2100050-a219999)dujjsjekkkdmm
This document provides parts information for an ARION 430-410 engine. It includes 4 pages listing engine part numbers, descriptions, dimensions and quantities. The document contains specifications for complete engine configurations with and without a 10hp compressor. It also includes sections for individual engine components like the crankcase, timing case, cylinder head and more.
This document provides parts lists and specifications for engines. It includes four pages listing parts by number for the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner/piston, connecting rod/bearings, crankshaft, crankshaft pulley wheel, and flywheel. Each part is specified by number, description, dimensions, quantity, and any additional conditions. A key is provided explaining homologation codes mentioned in the conditions.
This document provides parts lists and specifications for engines. It includes:
1) Lists of engine parts with part numbers, descriptions, quantities and additional details like dimensions or conditions.
2) The parts are grouped into categories like crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, flywheel etc.
3) Additional information is provided for some parts like homologation types, machine numbers, remarks on dimensions or specifications.
This document provides parts lists and specifications for engines. It includes:
1) Lists of engine parts with part numbers, descriptions, quantities and additional details like dimensions or conditions.
2) The parts are grouped into categories like crankcase, timing case, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, flywheel etc.
3) Additional information is provided for some parts to specify homologation types, dimensions, machine numbers or remarks.
1) This document provides part numbers, descriptions, dimensions and quantities for various engine components for an ARES 836-816 RZ QUADRISHIFT engine. It includes sections for the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner/piston, connecting rod/bearings, crankshaft, pulley wheel and flywheel.
2) Each component lists the part number, description, any relevant dimensions and the quantity required. Additional information includes homologation types, machine numbers and remarks about specifications.
3) The document contains detailed technical specifications for replacement parts for the ARES 836-816 RZ QUADRISHIFT engine across different
This document provides parts lists and specifications for engine components. It includes 3 pages listing parts for a crankcase assembly, including part numbers, descriptions, quantities and specifications. It also includes 3 pages listing parts for a timing case assembly, including the same details. All parts are specified for specific engine models and configurations.
1) The document provides parts lists and descriptions for various engine components for an ARES 720-710 RZ engine, including the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, crankshaft pulley wheel, and flywheel.
2) It lists each part number, description, quantity, and any additional conditions or remarks for over 100 individual parts across 16 assemblies.
3) The parts lists include gaskets, seals, bolts, washers, valves, bearings, and other components, with notes on applicability based on engine serial number ranges.
1) The document provides parts lists and descriptions for various engine components for an ARES 720-710 RZ engine, including the crankcase, timing case, flywheel housing, oil pan, plugs, cylinder liner and piston, connecting rod, crankshaft, crankshaft pulley wheel, and flywheel.
2) It lists each part number, description, quantity, and any additional conditions or remarks for over 100 individual parts across 16 assemblies.
3) The parts lists include gaskets, seals, bolts, washers, valves, bearings, and other components, along with specifications and homologation details for certain parts.
Toyota 7 fd45 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly of the transmission assembly. Procedures are outlined in steps and key points are called out, such as match marking parts during removal and selection of spacer thickness. Standard torque specifications are provided throughout.
Toyota 7 fd40 forklift service repair manualdujjsjekkkdmm
The document provides service procedures for removing and servicing a torque converter and transmission assembly. Key steps include draining the torque converter oil, removing the pilot boss, snap ring, and torque converter. Disassembly of the torque converter involves removing the flexible plate, drive cover, turbine runner, thrust bearing, stator, and pump boss. Inspection and measurements of various components are specified. Reassembly follows the reverse order of disassembly. Tightening torques are provided for multiple fasteners.
Toyota 7 fd35 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly and inspection of the transmission assembly. Procedures are outlined in steps and key points are called out, along with torque specifications and other technical details. References are also provided for engine repair manuals related to servicing the mounted engine.
Toyota 02 7 fg45 forklift service repair manualdujjsjekkkdmm
The document provides service procedures for removing and servicing a torque converter and transmission assembly. Key steps include draining the torque converter oil, removing the pilot boss, snap ring, and torque converter. Disassembly of the torque converter involves removing the flexible plate, drive cover, turbine runner, thrust bearing, stator, and pump boss. Inspection and measurements of various components are described. Reassembly is the reverse of removal. Tightening torques are provided for multiple fasteners.
Toyota 02 7 fg40 forklift service repair manualdujjsjekkkdmm
This document provides an overview of servicing procedures for a Toyota forklift transmission. It includes sections on removal and installation of the torque converter and transmission assembly, disassembly and inspection of the torque converter, and disassembly and inspection of the transmission assembly. Key steps and points of attention are highlighted for each procedure. Reference manuals for related engine repair are also listed. The document aims to provide technicians with information to correctly service the transmission systems of the forklift models covered.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
1. SERVICE MANUAL
TOYOTA 7FDF/FGF 15-35
BT Svenska AB
Per WärmlundPer WärmlundPer WärmlundPer WärmlundPer Wärmlund
NAME SECTION
GENERAL
ENGINE
TRANSMISSION
0
1
2
PROPELLER SHAFT
DIFFERENTIAL
FRONT AXLE
REAR AXLE
STEERING
BRAKE
BODY
MATERIAL HANDLING SYSTEM
MAST
CYLINDER
OIL PUMP
OIL CONTROL VALVE
SAS
APPENDIX
3
4
5
6
7
8
9
10
11
12
13
14
15
16
INDEX
< Tillbaka till Index
2. 0-1
0GENERAL
Page
EXTERIOR VIEWS......................................................... 0-2
VEHICLE MODEL .......................................................... 0-3
FRAME NUMBER........................................................... 0-4
HOW TO USE THIS MANUAL .................................... 0-5
EXPLANATIONMETHOD ................................................. 0-5
TERMINOLOGY................................................................ 0-6
ABBREVIATIONS ............................................................. 0-6
OPERATIONAL TIPS .................................................... 0-7
HOISTING THE VEHICLE ............................................ 0-8
CIRCUIT TESTER.................................................. 0-9
STANDARD BOLT & NUT TIGHTENING
TORQUE ....................................................................... 0-11
BOLT STRENGTH TYPE IDENTIFICATION METHOD ...... 0-11
TIGHTENING TORQUE TABLE ........................................ 0-12
PRECOAT BOLTS ......................................................... 0-13
HIGH PRESSURE HOSE FITTING
TIGHTENING TORQUE ............................................ 0-13
WIRE ROPE SUSPENSION ANGLE LIST ............... 0-14
SAFE LOAD FOR EACH WIRE ROPE
SUSPENSION ANGLE............................................... 0-14
COMPONENTS WEIGHT............................................. 0-15
RECOMMENDED LUBRICANT
QUANTITY & TYPES ................................................. 0-16
SMÖRJSCHEMA ........................................................... 0-18
PERIODISKT UNDERHÅLL ........................................ 0-19
UTBYTE AV SMÖRJMEDEL
OCH DELAR ................................................................. 0-25
5. 0-4
FRAME NUMBER
Frame No. Punching Position
Punching position
Series
1 ton series
2 ton series
3 ton, J3.5 ton series
Engine
4Y
1DZ-II
4Y
2Z
1DZ-II
4Y
2Z
1DZ-II
Vehicle model
42-7FGF15
42-7FGF18
02-7FDF15
02-7FDF18
42-7FGF20
42-7FGF25
02-7FDF20
02-7FDF25
62-7FDF20
62-7FDF25
02-7FGF30
02-7FGJF35
02-7FDF30
02-7FDJF35
62-7FDF30
Punching format
407FGF18 10011
7FDF18 10011
407FGF25 10011
7FDF25 10011
607FDF25 10011
7FGJF35 10011
7FDJF35 10011
607FDF30 10011
6. 0-5
HOW TO USE THIS MANUAL
EXPLANATIONMETHOD
1. Operation procedure
(1) The operation procedure is described in either pattern A or pattern B below.
Pattern A: Explanation of each operation step with illustration.
Pattern B: Explanation of operation procedure by indicating step numbers in one illustration, fol-
lowed by explanation of cautions and notes summarized as point operations.
Example of description in pattern B
DISASSEMBLY·INSPECTION·REASSEMBLY Tightening torque unit T = N·m (kgf-cm) [ft-lbf]
DisassemblyProcedure
1 Remove the cover. [Point 1]
2 Remove the bushing [Point 2] Operation explained later
3 Remove the gear.
Point Operations Explanation of key point for operation with an illustration
[Point 1]
Disassembly: Put a match mark when removing the pump cover.
[Point 2]
Inspection: Measure the bush inside diameter.
Limit: 19.12 mm (0.7528 in)
• Step Nos. are partially sometimes
omitted in illustrations.
• When a part requiring tightening
torque instruction is not indicated in
the illustration, the part name is de-
scribed in the illustration frame.
T = 46.1 ~ 48.1
(470 ~ 490)
[34.0 ~ 35.5]
7. 0-6
Abbreviation (code)
ASSY
LH
LLC
M/T
NMR
OPT
O/S
PS
RH
SAE
2. How to read components figures (Example)
(1) The components figure uses the illustration
in the parts catalog for the vehicle model.
Please refer to the catalog for checking the
part name.
The number at the right shoulder of each
components figure indicates the Fig. num-
ber in the parts catalog.
3. Matters omitted in this manual
(1) This manual omits description of the following jobs, but perform them in actual operation:
Cleaning and washing of removed parts as required
Visual inspection (partially described)
TERMINOLOGY
Caution:
Important matters of which negligence may cause accidents. Be sure to observe them.
Note:
Important items of which negligence may cause accidents, or matters in operation procedure
requiring special attention.
Standard: Values showing allowable range in inspection and adjustment.
Limit: Maximum or minimum allowable value in inspection or adjustment.
ABBREVIATIONS
Meaning
System of active stability
Special service tool
Standard
Tightening torque
Torque converter &
transmission
Number of teeth ( )
Undersize
With
Less
Meaning
Assembly
Left hand
Long life coolant
Manual transmission
No-load maximum
speed
Option
Oversize
Power steering
Right hand
Society of Automotive
Engineers (USA)
Abbreviation (code)
SAS
SST
STD
T =
T/C
T
U/S
W/
L/
-
FIG number in parts catalog
3201
8. 1-8
REMOVAL•••••INSTALLATION T = N•••••m (kgf-cm) [ft-lbf]
ENGINE ASSY
Engine mounting nut
End plate set bolt
Drive plate set bolt (for connecting engine crankshaft)
Drive plate set bolt (for connecting torque converter)
Torque converter housing set bolt
T = 53.9 ~ 99.0 (550 ~ 1010) [39.8 ~ 73.1]
T = 49.0 ~ 78.5 (500 ~ 800) [36.2 ~ 57.9]
4Y: T = 56.9 ~ 64.7 (580 ~ 660) [42.0 ~ 47.7]
1DZ-II•2Z: T = 76.5 ~ 93.2 (780 ~ 950) [56.4 ~ 68.7]
T = 14.7 ~ 21.6 (150 ~ 220) [10.9 ~ 15.9]
T = 29.4 ~ 44.1 (300 ~ 450) [21.7 ~ 32.6]
9. 1-9
Removal Procedure
1 Remove the engine hood. (See p. 9-5.)
2 Remove the toe board.
3 Drain coolant.
4 Remove the battery and battery tray.
5 Remove the relay block and electrical parts plate set bolts to free them.
6 Disconnect the accelerator wire and fuel hose. [Point 1]
7 Diesel Vehicle:
Remove the sedimenter bracket set bolt to free the bracket.
8 Disconnect connectors and wiring harness clamps around the engine.
9 Disconnect the torque converter cooler hose. [Point 2]
10 Remove the radiator.
11 Disconnect the air cleaner hose.
12 Remove the oil pump set bolts to free the pump.
13 Disconnect the exhaust pipe.
14 Disconnect the wiring from the starting motor.
15 Remove the under cover.
16 Remove the cover plate.
17 Remove 6 drive plate set bolts.
18 Remove the engine ASSY mounting nuts.
19 Slightly hoist the engine. [Point 3]
20 Support the torque converter housing with wooden blocks.
21 Separate the torque converter housing and engine. [Point 4]
22 Remove the engine ASSY with drive plate and torque converter end plate.
23 Remove the drive plate.
24 Remove the torque converter end plate.
25 Remove the starting motor.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
Note:
••••• Apply sealant (08833-00080) before tightening the drive plate set bolt (for connecting engine
crankshaft).
••••• Bleed air from the fuel system after installation of the engine ASSY. (For diesel vehicle) (See p.
1-11.)
10. 1-10
Point Operations
[Point 1]
Removal:
Put a match marks on the fuel hose and the coupler.
[Point 2]
Removal:
Put a match mark on the radiator and torque converter
cooler hose.
[Point 3]
Removal•Installation:
SST 09010-20111-71 ---
09010-23320-71 ---
Removal:
Tentatively hoist up until the mounting bolt completely
comes out from the hole in the frame.
[Point 4]
Removal:
Use a straight-edge screwdriver for separation. If the fit-
ting is too tight, change the SST hook position and adjust
the engine angle for easier separation.
SST
SST
11. 1-11
AIR BLEEDING FROM FUEL SYSTEM
(DIESEL VEHICLE)
1. Operate the hand pump of the fuel filter until the pump
operating force becomes heavy.
ENGINE SPEED INSPECTION AND ADJUSTMENT
Note:
Warm up the engine, set the vehicle to the following conditions, and conduct inspection and ad-
justment.
Coolant temperature: 80°°°°°C (176°°°°°F) or more, engine oil: 70°°°°°C (158°°°°°F) or more, operating oil tem-
perature: 50°°°°°C (122°°°°°F) or more, auto choke in release state (4Y engine)
4YENGINE
Idling speed and idle up speed inspection and adjust-
ment
<Gasoline Vehicle>
1. Install the engine speedometer.
2. Disconnect the idle up actuator and inspect the idle up
speed.
Standard: 1000 ± 30 rpm
3. If the measured value is out of the specified range, ad-
just by turning adjusting screw B.
4. Connect the idle up actuator.
5. Check the idling speed.
Standard: 750 rpm
6. If the measured value is out of the specified range, ad-
just by adjusting screw A.
7. If the speed is still higher after adjustment in 3 above,
adjust using the following procedure:
A
B
Actuator
hose
+ 50
-0
12. 1-12
(1) If the auto choke cam is contacting although the cool-
ant temperature is as specified above, replace the
auto choke.
(2) If the idle up actuator rod and adjusting screw B are
in contact with each other, turn adjusting screw B coun-
terclockwise.
<LPG/Gasoline or LPG>
1. Install the engine speedometer.
2. Disconnect the idle up actuator and inspect the idle up
speed.
Standard:
LPG/Gasoline: 1000 ± 30 rpm
Actuator
hose
B
B
B
Actuator
hose
LPG/Gasoline
Actuator
hose
LPG
LPG: 1400 ± 30 rpm
LPG (France spec.): 1400 ± 30 rpm
3. If the measured value is out of the specified
range, adjust by turning adjusting screw B.
Loosen the lock nut before adjustment in
case of the LPG engine vehicle (France
spec.).
4. Connect the idle up actuator.
Lock nut
B
5. Check the idling speed.
Standard:
LPG/Gasoline: 750 rpm
LPG: 800 rpm
LPG (France spec.) : 750 rpm
+ 50
- 0
+ 50
- 0
+ 50
- 0
LPG (France spec.)
13. 1-13
A
Regulator
LPG carburetor
B
C
6. If the measured value is out of the specified range, make
adjustment according to the following procedure:
(1) Make adjustment by turning adjusting screw B (LPG
vehicle) or C (LPG/gasoline vehicle).
(If less than the standard, turn adjusting screw A coun-
terclockwise beforehand.)
(2) Slowly turn adjusting screw A clockwise or counter-
clockwise until the maximum speed is obtained.
(3) Determine the positions of adjusting screws B and C
by repeating steps (1) and (2) until the value obtained
in step (2) satisfies the standard.
(4) Slowly turn adjusting screw A clockwise until the CO
concentration becomes 2 to 3%, and then turn it 45
degrees counterclockwise from the position where the
speed begins to drop.
E
D
LPG (France spec.)
(1) Make adjustment by turning adjusting screw D (LPG
vehicle).
(If less than the standard, turn adjusting screw E clock-
wise beforehand.)
(2) Determine the position of adjusting screw D by re-
peating step (1) until the value obtained in step (1) sat-
isfies the standard.
(3) Slowly turn adjusting screw E counter-clockwise until
the CO concentration becomes 2 to 3%, and then turn
it 45 degrees counterclockwise from the position where
the speed begins to drop.
No-load Maximum Speed Inspection••••• Adjustment
<Gasoline, LPG or LPG/Gasoline Vehicle>
1. Install the engine speedometer.
2. Inspect and adjust the no-load static maximum speed.
(1) Measure the speed when the accelerator pedal is fully
depressed.
Standard:
4Y engine:
1•2 ton series: ...................... 2600 ± 50 rpm
3• J3.5 ton series: ................. 2800 ± 50 rpm
(2) If the measured value does not satisfy the standard,
make adjustment as follows:
Remove the seal and loosen the lock bolt.
Fully depress the accelerator pedal.
Turn the bushing for adjustment, while holding the
adjusting screw of the air governor immovable with
a straight-edge screwdriver.
Lock bolt
Fix.
Adjusting screw
Bushing
14. 1-14
3. Check and adjust relief down.
(1) Operate the tilt lever fully backward with the engine
running at the maximum speed, and measure the de-
crease in speed (relief down) upon full relief.
Standard: Within 300 rpm
Tilt lever
(2) If the measured value is out of the standard range,
make adjustment according to the following proce-
dure:
Turn the adjusting screw counterclockwise to de-
crease relief down.
Return the screw by 1/10 of a turn to eliminate twist-
ing of the spring in the air governor.
Adjust the no-load maximum speed.
Repeat steps , and until the measured value
satisfies the standard.
4. Check and adjust hunting.
(1) Check for hunting upon tilt relief at the no-load maxi-
mum speed.
(2) If hunting occurs a few times or more, make adjust-
ment according to the following procedure:
Turn the adjusting screw clockwise by 1/2 of a turn
or more.
Return the screw counterclockwise by 1/4 of a turn.
Finally, turn it by 1/10 of a turn to eliminate twisting
of the spring in the air governor.
Adjust the no-load maximum speed.
Repeat steps through until hunting occurs no
more.
5. Repeat adjustments in steps 2 to 4 until respective stan-
dards are satisfied.
6. Seal the lock bolt.
15. 1-15
1DZ-II•••••2Z ENGINE
Idle Speed Inspection•••••Adjustment
1. Install the engine speedometer.
2. Check the idle speed.
Standard: 750 ± 25 rpm
3. If the measured value is out of the standard, loosen the
lock nut and make adjustment by turning adjusting screw
A.
No-load Maximum Speed Inspection•••••Adjustment
1. Install the engine speedometer.
2. Inspect and adjust the no-load maximum speed.
(1) Measure the speed when the accelerator pedal is fully
depressed.
Standard:
1DZ-II engine:
1 ton series: .................... 2600 ± 50 rpm
Vehicle speed control
system spec.: .............. 2600 ± 50 rpm
2• 3 ton series: ................. 2800 ± 50 rpm
2Z engine: ........................... 2400 ± 50 rpm
(2) If the measured value does not satisfy the standard ,
make adjustment as follows:
Remove the seal and loosen the lock nut.
Make adjustment by turning adjusting screw B.
3. Check and adjust relief down.
(1) Operate the tilt lever fully backward with the engine
running at the maximum speed and measure the de-
crease in speed (relief down) upon full relief.
Standard: Within 200 rpm
4. Seal the adjusting screws after the end of adjustment.
A
B
Tilt lever
16. 1-16
AIR CLEANER
SPECIFICATIONS
Type
Size
Intake type
Filtering area cm2
(in2
)
Others
Single (STD)
Cyclone type
7-inch
Fresh air introduction type
14600 (2263)
With evacuator valve
Double (OPT)
←
←
←
Outer: 18600 (2883)
Inner: 510 (79.1)
←
COMPONENTS
1703
17. 1-17
AIR CLEANER CLEANING••••• INSPECTION
1. Open the engine hood.
2. Remove the element.
Note:
In case of the double element type (OPT), do not remove
the inner element for other than replacement.
3. Clean the element.
(1) For ordinary cleaning, blow with compressed air [690
kPa (7kgf/cm2
) [100 psi] or less] vertically along the
pleats from the inside of the element.
If heavily contaminated, washing is possible.
(2) Element washing method
Dissolve neutral detergent in tepid water (approx. 40°C
(104°F)) and immerse the element in it for about 30
minutes. Then, rinse the element well with clear wa-
ter. [Water pressure: 275 kPa (2.8 kgf/cm2
) [40 psi] or
less]
After washing, naturally dry the element or dry the
element with a dryer (cold air).
Note:
••••• Do not damage the element during washing.
••••• Never use compressed air or hot air for drying.
4. Clean the evacuator valve (dust discharge valve).
(1) Hold the tip end of the evacuator valve and discharge
dust and dirt from the inside of the valve.
5. Inspect the element.
(1) After cleaning, place an electric bulb in the element to
inspect any damage in the element. If any pinhole,
tear or damage is found, replace it with a new ele-
ment.
6. Element replacement
Replace the element after it is washed six times or gen-
erally at intervals of 12 months.
Vehicle without
vehicle speed
control system
7. Install the element.
(1) Install the evacuator valve in the illustrated direction.
Vehicle with
vehicle speed
control system
60°
25°
18. 1-18
CLOGGING WARNING SYSTEM INSPECTION
1. Warning lamp inspection
(1) See that the air cleaner warning lamp comes on when
the ignition switch is turned ON and goes out when
the engine starts.
2. Individual inspection
(1) Use a mity vac to apply a negative pressure to the
vacuum switch, and inspect conduction.
Standard
Gasoline models:
2942 ± 294 Pa (300 ± 30 mm H2O)
(22.1 ± 2.2 mmHg) [11.81 ± 1.18 in H2O]
[0.870 ± 0.087 in Hg]: Conduction
Diesel models:
7473 ± 569 Pa (762 ± 58 mm H2O)
(56.0 ± 4.3 mmHg) [30.00 ± 2.28 in H2O]
[2.205 ± 0.169 in Hg]: Conduction
RADIATOR
COMPONENTS
1603
19. 1-19
Total
amount of
coolant
7.4 (1.95)
5.9 (1.56)
9.3 (2.46)
8.3 (2.19)
9.0 (2.37)
9.5 (2.51)
8.2 (2.16)
8.8 (2.32)
9.5 (2.51)
8.8 (2.32)
SPECIFICATIONS
Type Crossflow
Fin type Corrugated fin
Coolant capacity (in radiator) See the table below
Cap opening pressure kPa (kgf/cm2
) [psi] 88 ± 14.7 (0.9 ± 0.15) [13 ± 2.1]
Others Built in torque converter cooler (torque converter model)
COOLANT CAPACITY AND ANTIFREEZE TABLE Unit: (US gal)
Radiator
capacity
2.5 (0.66)
2.5 (0.66)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
3.7 (0.98)
LLC mixing
ratio at 30%
(to - 15°C
(5°F))
2.2 (0.58)
1.8 (0.48)
2.8 (0.74)
2.5 (0.66)
2.7 (0.71)
2.9 (0.77)
2.5 (0.66)
2.6 (0.69)
2.9 (0.77)
2.6 (0.69)
LLC mixing
ratio at 50%
(to - 35°C
(- 31°F))
3.7 (0.98)
3.0 (0.79)
4.7 (1.24)
4.2 (1.11)
4.5 (1.19)
4.8 (1.27)
4.1 (1.08)
4.4 (1.16)
4.8 (1.27)
4.4 (1.16)
Antirust
mixing at
5%
0.4 (0.11)
0.3 (0.08)
0.5 (0.13)
0.4 (0.11)
0.5 (0.13)
0.5 (0.13)
0.4 (0.11)
0.4 (0.11)
0.5 (0.13)
0.4 (0.11)
4Y
1DZ-II
4Y
1DZ-II
2Z
4Y
1DZ-II
2Z
4Y
2Z
1 ton series
2 ton series
3 ton series
J3.5 ton series
Note:
••••• The total amount of coolant does not include the capacity of the reservoir tank.
••••• Reservoir tank capacity: 0.6 (0.16 US gal) (at FULL mark position)
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 1-21
REMOVAL•••••INSTALLATION
Note:
The muffler can be removed by either of the two methods shown below.
Remove the muffler after removing the counterweight.
Remove the muffler after removing the radiator W/counterweight.
Here, method is explained.
Removal Procedure
1 Remove the counterweight. (See p. 9-6.)
2 Disconnect the exhaust pipe.
3 Remove the muffler W/tail pipe.
4 Disconnect the tail pipe from the muffler.
Installation Procedure
The installation procedure is the reverse of the removal procedure.
CATALYTIC MUFFLER MAINTENANCE
Replace the muffler ASSY every year (2000 hours) on either the gasoline or diesel engine vehicle.
3
2