The document provides technical information about the LT11/LT12/LT14/LT16 float gauges. The gauges use a float and measuring tape system to measure liquid levels in tanks. They can be used with analog or digital transmitters to output level measurements. The gauges are designed for low to high pressure applications from -200°C to 80°C, with measuring ranges from 0-30 meters and accuracy of ±2mm or better depending on the model. They install on various tank types and can provide reliable level measurement without requiring power.
The document provides information on ignition systems for 2.5L 4-cylinder and 4.0L 6-cylinder engines, including:
- The ignition system is controlled by the powertrain control module (PCM) and consists of spark plugs, ignition coil, distributor with camshaft position sensor, and various sensors.
- The distributor houses the camshaft position sensor which provides fuel injection synchronization. It does not have adjustable timing.
- The crankshaft position sensor mounted on the transmission bellhousing provides engine speed and position to the PCM.
Proline Promag 10P-Electromagnetic Flowmeter. Flow measurement of liquids in chemical or process applications. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
The document provides technical information about the Proline Promag 10W electromagnetic flow measuring system. It can measure bidirectional liquid flow from 50 μS/cm conductivity up to 110,000 m3/h. The system consists of a Promag 10 transmitter and Promag W sensor, available in a compact or remote version. It provides accurate flow measurement over a wide range of process conditions and interfaces.
The Snow Melt Control by Heat-Timer is made to run a hydronic heating system to melt ice or snow from driveways, station platforms, walkways, etc. For more information on its specifications, features and installation, visit us! Click https://www.heat-timer.com/snow-melt/
This document provides an overview and specifications for Eaton's Type CH loadcenters and circuit breakers. It describes the product features such as construction materials, neutral and grounding options, short circuit ratings, and available main breaker/lug sizes. It also lists the applicable standards and certifications as well as options for branch breakers, enclosures, accessories, and busing materials. Technical data and selection guides are provided to help choose the appropriate loadcenter configuration.
2002 polaris octane personal watercraft service repair manualfjkskemmdmm
The document is the 2002 service manual for the Polaris Octane personal watercraft. It provides information on identification numbers, specifications, maintenance guidelines and safety procedures for servicing the watercraft. The manual contains chapters covering general information, maintenance, engine/cooling, carburetion/exhaust, final drive/propulsion and electrical systems. It is intended to provide technicians with the proper procedures and specifications needed to safely service the 2002 Octane.
The document provides information on ignition systems for 2.5L 4-cylinder and 4.0L 6-cylinder engines, including:
- The ignition system is controlled by the powertrain control module (PCM) and consists of spark plugs, ignition coil, distributor with camshaft position sensor, and various sensors.
- The distributor houses the camshaft position sensor which provides fuel injection synchronization. It does not have adjustable timing.
- The crankshaft position sensor mounted on the transmission bellhousing provides engine speed and position to the PCM.
Proline Promag 10P-Electromagnetic Flowmeter. Flow measurement of liquids in chemical or process applications. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
The document provides technical information about the Proline Promag 10W electromagnetic flow measuring system. It can measure bidirectional liquid flow from 50 μS/cm conductivity up to 110,000 m3/h. The system consists of a Promag 10 transmitter and Promag W sensor, available in a compact or remote version. It provides accurate flow measurement over a wide range of process conditions and interfaces.
The Snow Melt Control by Heat-Timer is made to run a hydronic heating system to melt ice or snow from driveways, station platforms, walkways, etc. For more information on its specifications, features and installation, visit us! Click https://www.heat-timer.com/snow-melt/
This document provides an overview and specifications for Eaton's Type CH loadcenters and circuit breakers. It describes the product features such as construction materials, neutral and grounding options, short circuit ratings, and available main breaker/lug sizes. It also lists the applicable standards and certifications as well as options for branch breakers, enclosures, accessories, and busing materials. Technical data and selection guides are provided to help choose the appropriate loadcenter configuration.
2002 polaris octane personal watercraft service repair manualfjkskemmdmm
The document is the 2002 service manual for the Polaris Octane personal watercraft. It provides information on identification numbers, specifications, maintenance guidelines and safety procedures for servicing the watercraft. The manual contains chapters covering general information, maintenance, engine/cooling, carburetion/exhaust, final drive/propulsion and electrical systems. It is intended to provide technicians with the proper procedures and specifications needed to safely service the 2002 Octane.
The Waterpilot FMX167 is a pressure sensor for hydrostatic level measurement with three versions available from Endress+Hauser. The standard version has a 22mm stainless steel housing suitable for drinking water applications. A heavy duty version has a 42mm housing with a flush-mounted process diaphragm ideal for wastewater. A corrosion resistant version has a coated 29mm housing generally for use in saltwater. It provides reliable level measurement in various applications with high precision and long-term stability from its ceramic measuring cell.
The document provides technical information about the Proline Prosonic Flow 93P ultrasonic flow measuring system. It can measure volume flow of liquids in chemical and process applications through non-contact measurement from outside pipes of various diameters and materials. Key features include measurement of pure or slightly contaminated liquids regardless of pressure or conductivity, operation from -40 to 170°C, and interfaces for integration into common control systems.
The Proservo NMS5 is an intelligent tank gauge designed for high accuracy liquid level measurement in storage and process applications. It can measure liquid level, interfaces, density, and density profiles. It is suitable for applications involving oils, LPG, chemicals, and other liquids. The gauge uses latest microtechnology and can interface with tank monitoring systems using several communication protocols. It provides non-contact level measurement, easy programming, and predictive maintenance capabilities.
Liquipoint t ftw31 32 endress+hauser datasheet-level limit switch for multipl...ENVIMART
Liquipoint t ftw31 32 endress+hauser datasheet-level limit switch for multiple point - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Tank Side Monitor NRF590 Inventory Control Field device for tank sensor opera...Michael Sun
Application
The Tank Side Monitor NRF590 is a sensor integration and monitoring unit for bulk
storage tank gauging applications.
It can be used with Micropilot radar or Proservo level gauges and can be combined with
other HART compatible devices.
The Tank Side Monitor offers the following functions:
• intrinsically safe (i.s.) power supply of the connected devices
• parametrization of the connected devices
• display of the measured values
• tank calculations for accurate correction of the tank distortions
Features and benefits
• I.s. power supply and communication for Micropilot and Levelflex level radars
• Connects up to 6 HART devices via i.s. 2 wire, for example Prothermo for average
temperature measurement and Cerabar/Deltabar for HTMS density applications
• Backlit graphical LCD display; operation via 3 optical keys (touch control)
• User-friendly operating menu (multi-lingual)
• Interfaces to the tank inventory system Tankvision
• Provides communication to PLC, DCS and SCADA systems
• Various industry standard communication protocols, including
– Sakura V1
– EIA-485 Modbus
– Whessoematic WM550
– BPM (compatible with Enraf systems)
• Approved for use in explosion hazardous areas
• Weights & Measure-approved for use in custody transfer applications
The Proline Prosonic Flow 93W is an ultrasonic flow measuring system that uses transit time difference measurement to determine volume flow in pipes. It can measure flow of water and other liquids in pipes from 1/2 to 160 inches in diameter made of metal, plastic, or composite materials. The system consists of a transmitter and two sensors that mount externally to the pipe and measure flow without contact or pressure loss. It provides accurate bidirectional flow measurement with outputs for integration into control systems.
The document provides technical information on the Proline Prosonic Flow 91W ultrasonic flow measuring system. It can measure the flow rate of pure or slightly contaminated liquids in pipes ranging from 15mm to 2000mm in diameter, regardless of pressure or conductivity. The system uses ultrasonic clamp-on sensors mounted on the outside of the pipe to measure flow rate without interrupting process flow. Key features include bidirectional measurement, no pressure loss, robust sensors, and remote configuration via software.
The document describes the Proline Prosonic Flow 92F ultrasonic flow meter. It uses ultrasonic sensors to measure flow velocity and calculates volume flow rate. It can measure conductive and non-conductive liquids with temperature up to 150°C and pressure up to 40 bar. It has a 2-wire loop powered transmitter with outputs for current, pulse, frequency or status. It is suitable for industrial process applications.
Proline promag 10 p endress+hauser datasheet-electromagnetic flowmeterENVIMART
This document provides information on the Proline Promag 10P electromagnetic flow measuring system. It can measure bidirectional liquid flows from 50 μS/cm conductivity at rates up to 9600 m3/h. The system consists of a Promag 10 transmitter and Promag P sensor, available in a compact or remote version. It provides accurate flow data with a 4-20 mA output over a wide range of process conditions.
Proline t mass b 150-endress+hauser datasheet-thermal mass flow measuring systemENVIMART
Proline t mass b 150-endress+hauser datasheet-thermal mass flow measuring system - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Electromagnetic flowmeter - Proline Promag 50D. Flow measurement of liquids in water or wastewater applications. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
The Waterpilot FMX167 is a pressure sensor for hydrostatic level measurement with three versions available from Endress+Hauser. The standard version has a 22mm stainless steel housing suitable for drinking water applications. A heavy duty version has a 42mm housing with a flush-mounted process diaphragm ideal for wastewater. A corrosion resistant version has a coated 29mm housing generally for use in saltwater. It provides reliable level measurement in various applications with high precision and long-term stability from its ceramic measuring cell.
The document provides technical information about the Proline Prosonic Flow 93P ultrasonic flow measuring system. It can measure volume flow of liquids in chemical and process applications through non-contact measurement from outside pipes of various diameters and materials. Key features include measurement of pure or slightly contaminated liquids regardless of pressure or conductivity, operation from -40 to 170°C, and interfaces for integration into common control systems.
The Proservo NMS5 is an intelligent tank gauge designed for high accuracy liquid level measurement in storage and process applications. It can measure liquid level, interfaces, density, and density profiles. It is suitable for applications involving oils, LPG, chemicals, and other liquids. The gauge uses latest microtechnology and can interface with tank monitoring systems using several communication protocols. It provides non-contact level measurement, easy programming, and predictive maintenance capabilities.
Liquipoint t ftw31 32 endress+hauser datasheet-level limit switch for multipl...ENVIMART
Liquipoint t ftw31 32 endress+hauser datasheet-level limit switch for multiple point - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Tank Side Monitor NRF590 Inventory Control Field device for tank sensor opera...Michael Sun
Application
The Tank Side Monitor NRF590 is a sensor integration and monitoring unit for bulk
storage tank gauging applications.
It can be used with Micropilot radar or Proservo level gauges and can be combined with
other HART compatible devices.
The Tank Side Monitor offers the following functions:
• intrinsically safe (i.s.) power supply of the connected devices
• parametrization of the connected devices
• display of the measured values
• tank calculations for accurate correction of the tank distortions
Features and benefits
• I.s. power supply and communication for Micropilot and Levelflex level radars
• Connects up to 6 HART devices via i.s. 2 wire, for example Prothermo for average
temperature measurement and Cerabar/Deltabar for HTMS density applications
• Backlit graphical LCD display; operation via 3 optical keys (touch control)
• User-friendly operating menu (multi-lingual)
• Interfaces to the tank inventory system Tankvision
• Provides communication to PLC, DCS and SCADA systems
• Various industry standard communication protocols, including
– Sakura V1
– EIA-485 Modbus
– Whessoematic WM550
– BPM (compatible with Enraf systems)
• Approved for use in explosion hazardous areas
• Weights & Measure-approved for use in custody transfer applications
The Proline Prosonic Flow 93W is an ultrasonic flow measuring system that uses transit time difference measurement to determine volume flow in pipes. It can measure flow of water and other liquids in pipes from 1/2 to 160 inches in diameter made of metal, plastic, or composite materials. The system consists of a transmitter and two sensors that mount externally to the pipe and measure flow without contact or pressure loss. It provides accurate bidirectional flow measurement with outputs for integration into control systems.
The document provides technical information on the Proline Prosonic Flow 91W ultrasonic flow measuring system. It can measure the flow rate of pure or slightly contaminated liquids in pipes ranging from 15mm to 2000mm in diameter, regardless of pressure or conductivity. The system uses ultrasonic clamp-on sensors mounted on the outside of the pipe to measure flow rate without interrupting process flow. Key features include bidirectional measurement, no pressure loss, robust sensors, and remote configuration via software.
The document describes the Proline Prosonic Flow 92F ultrasonic flow meter. It uses ultrasonic sensors to measure flow velocity and calculates volume flow rate. It can measure conductive and non-conductive liquids with temperature up to 150°C and pressure up to 40 bar. It has a 2-wire loop powered transmitter with outputs for current, pulse, frequency or status. It is suitable for industrial process applications.
Proline promag 10 p endress+hauser datasheet-electromagnetic flowmeterENVIMART
This document provides information on the Proline Promag 10P electromagnetic flow measuring system. It can measure bidirectional liquid flows from 50 μS/cm conductivity at rates up to 9600 m3/h. The system consists of a Promag 10 transmitter and Promag P sensor, available in a compact or remote version. It provides accurate flow data with a 4-20 mA output over a wide range of process conditions.
Proline t mass b 150-endress+hauser datasheet-thermal mass flow measuring systemENVIMART
Proline t mass b 150-endress+hauser datasheet-thermal mass flow measuring system - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Electromagnetic flowmeter - Proline Promag 50D. Flow measurement of liquids in water or wastewater applications. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
1. Technical Information
LT11/LT12/LT14/LT16
Float Gauge
Mechanical tank gauge for accurate and reliable level
measurement
Application Benefits
The LT series of float gauges have been developed • No electrical power is required to perform the
for use in all areas of industry. Many years of measurement
operation in a wide variety of applications have • Built-in repeatability check
proven their reliability. • Direct reading at the tank side allows you to
check the tank contents easily
Typical application includes: • Can be installed on a variety of tanks including
• Level indication of petroleum products such as fixed roof, floating roof, covered floating roof
crude oil; kerosene; light and heavy oil, and spherical tanks
vegetable oil, palm oil, seed oil and animal oil • Can be used in conjunction with
• Highly viscous liquid such as asphalt analogue/digital transmitter to perform tank
• Certain chemicals (corrosive/toxic vapor can be inventory management
sealed using a liquid seal pot)
• Liquid gas measurement a spherical tank
TI00458G/08/EN/01.11
71139195
3. Float Gauge LT11/LT12/LT14/LT16
Function and system design
Measuring principle The float gauge consists of a float, measuring tape,and the gauge head. When the float is immersed
in the tank liquid, it is balanced by its own buoyancy and the tension of the measuring tape. This
measuring tape is wound around a drum, which is located inside the tank gauge
head with given tension by the spring motor.
When the liquid level changes, the change in the float buoyancy is detected and the spring motor
adjusts the measuring tape to maintain the float position on the surface of the liquid. The measuring
tape has a series of holes set at regular interval. As the tape rotates the sprocket, it activates the
display indicator.
The position of the measuring tape holes on the sprocket compensates for the tape weight and
prevents the tape from slipping. To provide analogue or digital outputs, a transmitter can be coupled
directly to the sprocket wheel and attached to the back of the gauge head.
Sheave elbow
Combine with Analog AT1
transmitter • 4 - 20mA current output
• 6 points alarm signal output
AT500
• 6 points alarm signal output
Combine with Digital TMD1
transmitter • 2 wire bi-serial pulse (V1 protocol) output
• 4 - 20 mA current output
• 8 points alarm signal output
Endress+Hauser 3
4. Float Gauge LT11/LT12/LT14/LT16
Performance characteristics
Measuring ranges
Product roots Measuring range
LT11/LT12/LT14/LT16 0~2.5, 5, 10, 16, 20, 30m
Accuracy
Product roots Measuring range
LT11/LT12/LT14/LT16 ±2mm (Under the condition of; specific gravity: 1g/cm3,
measuring range; 10m)
LT11 Application (060) ±30mm (Under the condition of; specific gravity: 1g/cm3,
...005, 008 measuring range; 10m)
Maximum operating pressure
Product roots Measuring range
LT11 (threaded version for 19.61kPa (0.2kgf/cm2)
low pressure)
LT12 (flange version for low 19.61kPa (0.2kgf/cm2)
pressure)
LT14 (flange version for 98.07kPa (1kgf/cm2)
middle pressure)
LT16 (flange version for 2451.66kPa (25kgf/cm2), *2.0MPa (in case of SUS304 bolt)
high pressure)
*Enabled pressure varies depending on using flange specification.
Operating temperature limits
Product roots Temperature range
LT11/LT12 Wetted parts: -200~+200ºC
Gauge head: -20~+70ºC
LT14/LT16 Wetted parts: -45~+80ºC
Gauge head: -20~+70ºC
4 Endress+Hauser
5. Float Gauge LT11/LT12/LT14/LT16
Operating Conditions : Installation
Cone roof Tank (CRT) LT11
90° Sheave elbow
In LT12, Gauge head, Sheave elbow
and Top anchor are connected with
flange.
*Please refer to 15 page “Process
connection” list.
109
Φ400
Anchor hook
Anchor hook
Application (060)
LT11 Wetted parts : SS400 Wetted parts : SUS316 Wetted parts:SUS316, Top anchor:SUS316
without Crank unit A01 A04 A06
Application with Crank unit B01 B04 B06
Guide wire Single wire Single wire Single wire
Item Material/Qty. Material/Qty. Material/Qty.
Guage head (threaded 1-1/2) Outer coating : ADC12/1 Outer coating : ADC12/1 Outer coating : ADC12/1
90° Sheave elbow (threaded 1-1/2) Outer coatimg : ADC6 / Roller : SUS316L/2 Outer coatingADC6 / Roller : SUS316L/2 Outer coating : ADC6 / Roller : SUS316L/2
Outer coating : ADC6 , Outer coatingADC6 ,
Top anchor All SUS316 (Socket weld type)/2
Inner coatimg : SUS316(threaded 1)/2 Inner coating SUS316 (threaded1)/2
Float Φ400 Outer coatimg : SUS316/1 SUS316/1 SUS316/1
Guide wire SUS316/2 SUS316/2 SUS316/2
Measuring tape SUS316/1 SUS316/1 SUS316/1
Gauge supporter SS400/1 SS400/1 SS400/1
Anchor hook SS400/2 SUS316/2 SUS316/2
LT12 Wetted parts : SS400 Wetted parts: SUS316 Wetted parts:SUS316, Top anchor:SUS316
without Crank unit A11 A14 A15
Application with Crank unit B11 B14 B15
Guide wire Single wire Single wire Single wire
Item Material/Qty. Material/Qty. Material/Qty.
Guage head (flange1-1/2) Outer coating : ADC12/1 Outer coating : ADC12/1 Outer coating : ADC12/1
90°Sheave elbow (flange1-1/2) Outer coating : ADC6 / Roller : SUS316L/2 Outer coating : ADC6 / Roller : SUS316L/2 Outer coating : ADC6/Roller : SUS316L/2
Outer coating : ADC6,
Top anchor(flange 1-1/2) Outer coating : ADC6 / Inner : SUS316/2 All SUS316/2
inner coating : SUS316/2
Float Φ400 SUS316/1 SUS316/1 SUS316/1
Guide wire SUS316/2 SUS316/2 SUS316/2
Measuring tape SUS316/1 SUS316/1 SUS316/1
Gauge supporter SS400/1 SS400/1 SS400/1
Anchor hook SS400/2 SUS316/2 SUS316/2
Endress+Hauser 5
6. Float Gauge LT11/LT12/LT14/LT16
Tank top mount LT11
(Underground tank)
In LT11, gauge head, Sheave elbow,
seal pot and top anchor are connected
with threaded.
*Please refer to 15 page “Process
connection” list.
Anchor hook
Except all-in-one
(Solid wire)
Application (060)
LT11 Wetted parts : SS400 Wetted parts:SUS316, Top anchor:SUS316
without Crank unit A07 A10
Application with Crank unit C07 C10
Guide wire Single wire Single wire
Item Material/Quantity Material/Quantity
Guage head (threaded 1-1/2) Outer coating : ADC12 ( inverted mounting) /1 Outer coating : ADC12 ( inverted mounting)/1
Top anchor Outer coating : ADC6 /I nner coating : SUS316(threaded1)/2 All SUS316 (Socket weld type) /2
Float Φ400 SUS316/1 SUS316/1
Guide wire SUS316/1 SUS316/1
Measuring tape SUS316 ( all hole) /1 SUS316 ( all hole) /1
Anchor hook SS400/2 SUS316/2
LT12 Wetted parts : SS400 Wetted parts:SUS316, Top anchor:SUS316
without Crank unit A40 A43
Application with Crank unit B40 B43
Guide wire Single wire Single wire
Item Material/Quantity Material/Quantity
Guage head Outer coating : ADC12 ( inverted mounting) /1 Outer coating : ADC12 ( inverted mounting) /1
Top anchor ( flange1-1/2) Outer coating : ADC6 / Inner coating : SUS316/2 All SUS316/2
Float Φ400 SUS316/1 SUS316/1
Guide wire SUS316/2 SUS316/2
Measuring tape SUS316 ( all hole) /1 SUS316 ( all hole) /1
Anchor hook SS400/2 SUS316/2
6 Endress+Hauser
7. Float Gauge LT11/LT12/LT14/LT16
Cone roof Tank LT12
(with seal pot for CRT) 90° Sheave elbow
In LT11, gauge head, Sheave elbow,
seal pot and top anchor are connected
with threaded.
*Please refer to 15 page “Process
connection” list.
Anchor hook
Anchor hook
Application (060)
LT11 Wetted parts: SS400 Wetted and gas parts: SUS316
without Crank unit A50 A54
Application with Crank unit B50 B54
Guide wire Single wire
Item Material/Quantity Material/Quantity
Guage head (threaded1-1/2) Outer coating : ADC12/1 Outer coating : ADC12/1
Seal pot (threaded1-1/2) Outer coating : ADC, AC,SGP / Roller : SUS316L/2 Outer coating : SCS14, SUS316 / Roller : SUS316L/1
90°Sheave elbow (threaded1-1/2) Outer coating : ADC6 / Roller : SUS316L1/1 Outer coating : ADC6 / Roller : SUS316L/1
Top anchor Outer coating : ADC6 / Inner coating : SUS316(threaded 1)/2 All SUS316(Socket weld type)/2
Float Φ400 SUS316/1 SUS316/1
Guide wire SUS316/2 SUS316/2
Measuring tape SUS316/1 SUS316/1
Gauge supporter SS400/1 SS400/1
Anchor hook SS400/2 SUS316/2
LT12 Wetted parts : SS400 Wetted and gas parts: SUS316
without Crank unit A55 A59
Application with Crank unit B55 B59
Guide wire Single wire Single wire
Item Material/Quantity Material/Quantity
Guage head (flange1-1/2) Outer coating : ADC12/1 Outer coating : ADC12/1
Seal pot (flange1-1/2) Outer coating : ADC, AC, SGP / Roller : SUS316L/1 Outer coating : SCS14, SUS316 / Roller : SUS316L/1
90°Sheave elbow (flange1-1/2) Outer coating : ADC6 / Roller : SUS316L/1 Outer coating : ADC6 / Roller : SUS316L/1
Top anchor (flange1-1/2) Outer coating : ADC6 / Inner coating : SUS316/2 All SUS316/2
Float Φ400 SUS316/1 SUS316/1
Guide wire SUS316/2 SUS316/2
Measuring tape SUS316/1 SUS316/1
Gauge supporter SS400/1 SS400/1
Anchor hook SS400/2 SUS316/2
Endress+Hauser 7
8. Float Gauge LT11/LT12/LT14/LT16
Cone roof Tank LT12
(with seal pot PVC for CRT)
90° Sheave elbow
sheave
In LT11, gauge head, 90° Sheave
elbow is connected with threaded,
seal pot and top anchor are connected
with flange.
*Please refer to 15 page “Process
connection” list.
Tank and
parts coating
by Customer
Application (060)
LT11 Wetted parts:PVC,SS400, Gas parts:PVC,PFA Wetted parts:PVC,SUS316, Gas parts:PVC,PFA
without Crank unit 060 062
Application
Guide wire Stranded wire Stranded wire
Item Material/Quantity Material/Quantity
Guage head (threaded 1-1/2) Outer coating : ADC12/1 Outer coating : ADC12/1
Seal pot (flange1-1/2) Outer coating :PVC / Roller : PVC/1 Outer coating : PVC / Roller : PVC/1
90° Sheave elbow (threaded 1-1/2) Outer coating : ADC6 / Roller : SUS316L/1 outer coating : ADC6 / Roller : SUS316L/1
Top anchor (flange1-1/2) All PVC/2 All PVC/2
Float Φ400 PVC/1 PVC/1
Guide wire SUS316 (PFA coating)/1 SUS316 (PFA coating)/1
Meas. Wire + Meas. Tape SUS316(PFA coating) + SUS316/1 SUS316(PFA coating)+SUS316/1
Guage supporter SS400/1 SS400/1
wire hook SS400 + PVC/2 SUS316 + PVC/2
LT12 Wetted parts:PVC,SS400,Gas parts:PVC,PFA Wetted parts:PVC,SUS316, Gas parts:PVC,PFA
without Crank unit 061 063
Application
Guide wire Stranded wire Stranded wire
Item Material/Quantity Material/Quantity
Guage head (flange 1-1/2) Outer coating : ADC12/1 Outer coating : ADC12/1
Seal pot (flange 1-1/2) Outer coating : PVC / Roller : PVC/1 Outer coating : PVC / Roller : PVC/1
90° Sheave elbow (flange 1-1/2) Outer coating : ADC6 / Roller : SUS316L/1 Outer coating : ADC6 / Roller : SUS316L/1
Top ancher (flange 1-1/2) All PVC/2 All PVC/2
Float Φ400 PVC/1 PVC/1
Guide wire SUS316 (PFA coating)/1 SUS316 (PFA coating)/1
Meas. Wire + Meas. Tape SUS316(PFA coating) + SUS316/1 SUS316(PFA coating) + SUS316/1
Guage supporter SS400/1 SS400/1
Wire hook SS400 + PVC/2 SUS316 + PVC/2
8 Endress+Hauser
10. Float Gauge LT11/LT12/LT14/LT16
Tank top mount LT11
(guide pipe method)
Ø
Application (060)
LT11 Gu id e p ip e
Ap p lica tion 008
Item Material/Quantity
Guage head Outer co ating : ADC12 (inverted mo unting)/1
Flo at Φ 140 SUS316/1
Measuring tape SUS316/1
10 Endress+Hauser
15. Float Gauge LT11/LT12/LT14/LT16
Mechanical construction
Design, dimension LT11 (threaded type, Low pressure)
* 1) Process connection (threaded)
Gauge head Top anchor Top anchor/seal pot
040 Sheave elbow Seal pot(except socket type) (PVC)
0 Rp1-1/2 without Union Rp1-1/2 Rp1-1/2 R1 10K 40A FF JIS
A Rc1-1/2 with Union Rp1-1/2 Rp1-1/2 NPT1 150lbs 1-1/2 FF
B NPT1-1/2 with Union NPT1-1/2 NPT1-1/2 R1 10K 40A FF JIS
C G1-1/2 with Union Rp1-1/2 Rp1-1/2 R1 10K 40A FF JIS
Rp1-1/2
Rp1-1/2
Rp1-1/2
R1 or
90° Sheave elbow
Rp1-1/2, NPT1-1/2
Anchor hook
Guide bolt
Endress+Hauser 15
19. Float Gauge LT11/LT12/LT14/LT16
Total mass/painting color
Type range
LT11 (threaded , low pressure) Approx. 15kg, silver
LT12 (flange, low pressure) Approx. 15kg, silver
LT14 (flange, medium pressure) Approx. 22kg, silver
LT16 (flange, high pressure) Approx. 100kg, silver
Note!
Stainless is not painted.
Human interface
Display There are Dial type and Counter type in gauge head display. Usually, when tank height is up to 20mm,
indicator is Dial display type and when tank height is over 20mm, indicator is counter display type.
Dial display
Counter display
Endress+Hauser 19
20. Float Gauge LT11/LT12/LT14/LT16
Certificates and approvals
Protection class
Product roots Class
LT11/LT12/LT14/LT16 IP55
20 Endress+Hauser
21. Float Gauge LT11/LT12/LT14/LT16
Ordering information
LT11 (LT1100)
010 Display:
1 Dial 2 pointers
2 Numeric (mechanical counter)
5 Dial 2 pointers , up side down
9 Special version, TSP-no. to be spec.
020 Crank Unit:
0 Not selected
1 Selected
9 Special version, TSP-no. to be spec.
030 Function:
0 Basic version
9 Special version, TSP-no. to be spec.
040 Process Connection:
0 Thread JIS B0203 Rp 1-1/2, w/o union nut, SUS316
A Thread JIS B0203 Rc 1-1/2, union nut, sleeve, SUS316
B Thread ANSI NPT1-1/2, union nut, sleeve, SUS316
C Thread JIS B0202 G1-1/2, union nut, sleeve, SUS316
9 Special version, TSP-no. to be spec.
050 Measuring Range:
1 2.5m
2 5m
3 10m
4 16m
5 20m
6 30m (numeric display only)
9 Special version, TSP-no. to be spec.
060 Application:
AAA Gauge head only , accessories ordered by selection tool
000 Gauge head only
005 CRT, guide pipe installation
008 Tank top, guide pipe installation
060 PVC, SS400 wire hook
062 PVC, SUS316 wire hook
251 Gas holder
261 FRT tank
A01 Standard application for CRT , tape not installed
(solid guide wire , 2 anchor hooks)
A04 Wetted parts, SUS316 , tape not installed
(solid guide wire, 2 anchor hooks)
A06 Wetted / gas parts, SUS316 , tape not installed
(solid guide wire, 2 anchor hooks)
A07 Underground standard, tape not installed
(solid guide wire, 2 anchor hooks)
A10 Underground standard, SUS316 tape not installed
(solid guide wire, 2 anchor hooks)
A50 Seal pot standard, tape not installed
(solid guide wire , 2 anchor hooks)
A54 Seal pot all SUS316, tape not installed
(solid guide wire , 2 anchor hooks)
B01 Standard, crank unit ,tape not installed
(solid guide wire , 2 anchor hooks)
B04 Wetted parts SUS316, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B06 Wetted / gas parts SUS316, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B50 Seal pot standard, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B54 Seal pot SUS316, crank unit, tape not installed
(solid guide wire, 2 anchor hooks)
C07 Underground tank installation, crank unit, tape not installed
(solid guide wire, 2 anchor hooks)
C10 Underground tank installation, tape not installed
(solid guide wire, 2 anchor hooks)
999 Special version, TSP-no. to be spec.
LT11 Product designation (part 1)
Endress+Hauser 21
22. Float Gauge LT11/LT12/LT14/LT16
070 Float:
1 4.2 ㎏ , d = 400mm
2 5.0 ㎏ , d = 400mm
3 8.0 ㎏ , d = 400mm
4 Not selected
5 2.1 ㎏ , d = 140mm
6 2.4 ㎏ , d = 140mm
9 Special version, TSP-no. to be spec.
080 Additional Option; Color:
0 Basic version
C Copper free
D Glass display cover
J Copper free, glass display cover
9 Special version, TSP-no. to be spec.
LT11- Complete product designation
22 Endress+Hauser
23. Float Gauge LT11/LT12/LT14/LT16
LT12 (LT1200)
010 Display:
1 Dial 2 pointers
2 Numeric (mechanical counter)
5 Dial 2 pointers , up side down
9 Special version, TSP-no. to be spec.
020 Crank Unit:
0 Not selected
1 Selected
030 Function:
0 Basic version
9 Special version, TSP-no. to be spec.
040 Process Connection:
-JIS flange-
1 10K 40A RF, AC4A, flange JIS B2220
A 10K 40A RF, SUS316, flange JIS B2220
-ANSI flange-
2 1-1/2 150lbs RF, AC4A, flange ANSI B16.5
B 1-1/2 150lbs RF, SUS316, flange ANSI B16.5
-JPI flange-
3 40A 150lbs RF, AC4A, flange JPI 7S-15
C 40A 150lbs RF, SUS316, flange JPI 7S-15
9 Special version, TSP-no. to be spec.
050 Measuring Range:
1 2.5m
2 5m
3 10m
4 16m
5 20m
6 30m(numeric display only)
9 Special version, TSP-no. to be spec.
060 Application:
AAA Gauge head only , accessories ordered by selection tool
000 Gauge head only
061 PVC , SS400 wire hook
063 PVC , SUS316 wire hook
252 Gas holder
262 FRT tank
A11 Standard application for CRT , tape not installed (solid guide wire , 2 anchor hooks)
A14 Wetted parts , SUS316 , tape not installed
(solid guide wire , 2 anchor hooks)
A15 Wetted / gas parts , SUS316 , tape not installed
(solid guide wire , 2 anchor hooks)
A40 Underground standard , tape not installed
(solid guide wire , 2 anchor hooks)
A43 Underground standard , SUS316 tape not installed
(solid guide wire , 2 anchor hooks)
A55 Standard, seal pot , tape not installed
(solid guide wire , 2 anchor hooks)
A59 Seal pot all SUS316 , tape not installed
(solid guide wire , 2 anchor hooks)
B55 Standard, seal pot, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B59 Seal pot all SUS316, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B11 Standard, crank unit , tape not installed
(solid guide wire , 2 anchor hooks)
B14 Wetted parts SUS316, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B15 Wetted / gas parts SUS316, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B40 Underground tank installation, crank unit, tape not installed
(solid guide wire , 2 anchor hooks)
B43 UTI, Wetted parts SUS316, crank unit, tape not installed
UTI = Underground tank install
(solid guide wire , 2 anchor hooks)
999 Special version, TSP-no. to be spec.
LT12- Product designation (part1)
Endress+Hauser 23
24. Float Gauge LT11/LT12/LT14/LT16
070 Float:
1 4.2 ㎏ , d = 400mm
2 5.0 ㎏ , d = 400mm
3 8.0 ㎏ , d = 400mm
4 Not selected
9 Special version, TSP-no. to be spec.
080 Additional Option; Color:
0 Basic version
C Copper free
D Glass display cover
J Copper free, glass display cover
9 Special version, TSP-no. to be spec.
LT12- Complete product designation
24 Endress+Hauser
25. Float Gauge LT11/LT12/LT14/LT16
LT14 (LT1400)
010 Display:
1 Dial 2 pointers
2 Numeric (mechanical counter)
5 Dial 2 pointers , up side down
9 Special version, TSP-no. to be spec.
020 Crank Unit:
0 Not selected
1 Selected
9 Special version, TSP-no. to be spec.
030 Function:
0 Basic version
9 Special version, TSP-no. to be spec.
040 Process connection
-JIS flange-
1 10K 40A RF, AC4CT6, flange JIS B2220
A 10K 40A RF, SCS13, flange JIS B2220
-ANSI flange-
3 1-1/2 150lbs RF, AC4CT6, flange ANSI B16.5
C 1-1/2 150lbs RF, SCS13, flange ANSI B16.5
-JPI flange-
5 40A 150lbs RF, AC4CT6, flange JPI 7S-15
E 40A 150lbs RF, SCS13, flange JPI 7S-15
9 Special version, TSP-no. to be spec.
050 Measuring Range:
1 2.5m
2 5m
3 10m
4 16m
5 20m
6 30m(numeric display only)
9 Special version, TSP-no. to be spec.
060 Application:
AAA Gauge head only , accessories ordered by selection tool
000 Gauge head only
040 Standard, sheave elbow 90°x 2
041 Wetted / gas parts , SUS316, sheave elbow 90°x 1, 135°x 2
078 Alu, sheave elbow 90°x1, 135°x 2
094 Standard, sheave elbow 90°x 2, crank unit
095 Wetted / gas parts , SUS316, crank unit, sheave elbow 90°x 1, 135°x 2
098 Alu, sheave elbow 90°x1, 135°x 2, crank unit
999 Special version, TSP-no. to be spec.
070 Float:
4 Not selected
5 8.0kg, d=400mm
9 Special version, TSP-no. to be spec.
080 Additional Option; Color:
0 Basic version
C Copper free
9 Special version, TSP-no. to be spec.
LT14- Complete product designation
Endress+Hauser 25
26. Float Gauge LT11/LT12/LT14/LT16
LT16 (LT1600)
010 Display:
1 Dial 2 pointers
2 Numeric (mechanical counter)
5 Dial 2 pointers , up side down
9 Special version, TSP-no. to be spec.
020 Crank Unit:
0 Not selected
1 Selected
9 Special version, TSP-no. to be spec.
030 Function:
0 Basic version
9 Special version, TSP-no. to be spec.
040 Process Connection:
-- JIS-Flanges --
1 10K 40A RF, SCPL1,SNB7, flange JIS B2220
2 20K 40A RF, SCPL1,SNB7, flange JIS B2220
A 10K 40A RF, SCS13, SUS304, flange JIS B2220
B 20K 40A RF, SCS13, SUS304, flange JIS B2220
G 20K 40A RF, SCS13, SNB7, flange JIS B2220
-- ANSI-Flanges --
3 1-1/2 150lbs RF, SCPL1, SNB7, flange ANSI B16.5
4 1-1/2 300lbs RF, SCPL1, SNB7, flange ANSI B16.5
C 1-1/2 150lbs RF, SCS13, SUS304, flange ANSI B16.5
D 1-1/2 300lbs RF, SCS13, SUS304, flange ANSI B16.5
H 1-1/2 300lbs RF, SCS13, SNB7, flange ANSI B16.5
-JPI flange-
5 40A 150lbs RF, SCLP1, SNB7, flange JPI 7S-15
6 40A 300lbs RF, SCLP1, SNB7, flange JPI 7S-15
E 40A 150lbs RF, SCS13, SUS304, flange JPI 7S-15
F 40A 300lbs RF, SCS13, SUS304, flange JIS B2220
J 40A 300lbs RF, SCS13, SNB7, flange JIS B2220
Special version, TSP-no. to be spec.
050 Measuring Range:
1 2.5m
2 5m
3 10m
4 16m
5 20m
6 30m (numeric display only)
9 Special version, TSP-no. to be spec.
060 Application:
AAA Gauge head only , accessories ordered by selection tool
000 Gauge head only (except tank top installation)
042 Standard, sheave elbow 90°x 1, 135°x 2
043 Sheave elbow 90°x 2
044 Tank top installation
096 Standard, sheave elbow 90°x 1, 135°x 2 , crank unit
097 Sheave elbow 90°x 2 + crank unit
999 Special version, TSP-no. to be spec.
070 Float:
4 Not selected
5 8.3kg, d=400mm
9 Special version, TSP-no. to be spec.
080 Additional Option; Color:
0 Basic version
B Gauge head bolts SUS304
C Cooper free
F Cooper free, Gauge head bolts SUS304
9 Special version, TSP-no. to be spec.
LT16- Complete product designation
26 Endress+Hauser
27. Float Gauge LT11/LT12/LT14/LT16
Accessories
Anchor weight The anchor weight is used for keeping guide wires
in applications where the fixed anchors have not been
installed.
Material: SS400 or SUS316
Weight: 23 kg.
Anchor hool
Seal pot for LT 11/12 Seal pot prevents toxic or corrosive vapors LT12
LT11
escaping from the tank via the gauge installation.
Seal liquid: e.g. liquid paraffin or spindle oil
Max seal pressure: 0.4 bar/ 1150cc
Shape: U-shape
Process connection: thread or flange
Rp1-1/2
Material: AC4A+SGP, SUS 316 or PVC
Refer to page 15,16.
Rp1-1/2
Crank device The crank is attached to the gauge head and enables the
float to be raised or, lowered manually.
This is particularly useful on large tanks or other
situations where turbulence is expected.
Pipe supporter Pipe support is used to attach a pipe to the tank.
Material: SS400
Endress+Hauser 27
28. 28
LT11
Note:
•Number(the number of accessories) and Mark (*) listed on this list are applied as specification. •Connecting screw standards and connecting flange standards of accessory are compliant with selected spec. in connecting standards.
•Material: SUS304: Stainless, SUS316:Stainless, SUS316L: Stainless casting, SCS13:Stainless casting, SCS14: Stainless casting, STPL:Iron pipe, SCPL:Cast steel, SS400: Iron, ADC:Aluminum, AC: Aluminum, PFA: Perfluoroalkoxy, PTFE:Perfluoroalkoxy, PVC: Polyvinyi chioride
•Tank type: CRT: Coneroof tank, FRT: floating roof tank
Kit code LT11
without Crank unit 000 005 008 060 062 251 261 A 01 A 04 A 06 A 07 A 10 A 50 A 54
with Crank unit B 01 B 04 B 06 C 07 C 10 B 50 B 54
Stranded wire
* *
(including coated wire)
Guide wire Solid wire * * * * * * *
Tank application
Accessories Specification
FRT
CRT
Material, Standards
Gauge head
parts SUS316
CRT/Max.10m/
Guide pipe
CRT/Wetted
CRT/Vaper seal
Under ground tank/
Top mounting/
Wetted parts
USUS316
CRT/Vaper seal/
wetted parts:PVC
& SUS316/
Gas-phase parts:
PVC
CRT/Vaper seal/
Wetted parts
SUS316
Under ground tank/
top mounting/
Max.10m/
Guide pipe
CRT/Vaper seal/
wetted parts:PVC
& SS400/
Gas-phase parts:
PVC
Under ground tank/
Top mounting
Wet gas holder
parts SUS316
CRT/Wetted
Float Coating/OD SUS316/D400 1 1 1 1 1 1 1 1
SUS316/D140 1 1
PVC/D400 1 1
Seal pot Coating/Roller ADC,AC,SGP/SUS316L 1
SCS14,SUS316/SUS316L 1
PVC/PVC 1 1
Connection Screw: 1-1/2 * *
Flange: 1-1/2 * *
90˚ Sheave elbow Outer coating ADC or AC 2 1 1 2 2 2 2 2 1 1
SCS13
SCS14
Roller SUS316L * * * * * * * * * *
SUS304
Connection Screw: 1-1/2 * * * * * * * * * *
Flange: 1-1/2
Measureing tape Tape SUS316 1 1 1 1 1 1 1 1 1
Tape & wire SUS316+SUS316 1 1
SUS316+PFA coating 1 1
Configuration for deliver Separate tape and gauge head * * * * * * * * * * * * *
Application detail and Material list
Coating ADC or AC 2 2 2 2
SUS316 2 2 2
Top anchor SUS316 * * * * * * *
Inner & outer coating PVC 2 2
Connection Screw: 1 * * * *
Flange: 1-1/2 * *
Socket weld * * *
Guide wire Coated standard wire x 1 SUS316 D3, PFA coating D4.6 1 1
Solid wire x 2 SUS316 D3 2 2 2 2 2 2 2
Anchor hook SS400 2 2 2
(welding mounting) L shape x 2 2 2 2 2
SUS316
Wire hook SS400+PVC 2
L shape x 2
(welding mounting) SUS316+PVC 2
Wire guide socket Outer coating/connection Cast iron & PVC, screw 1-1/2 1 1
Guide wire metal Outer coating/connection SS400 & PTFE, flange 1
Measuring wire hook Outer coating/mounting SS400, Welding mounting 1
Gauge support Outer coating/mounting SS400, Welding mounting 1 1 1 1 1 1 1 1 1 1
Endress+Hauser
Float Gauge LT11/LT12/LT14/LT16