Businesses used to spend thousands of dollars on damage caused by graffiti each year. But now, they no longer have to worry. Anti graffiti window films provide the protection that Dallas property owners need to keep their building vandalism-free. Learn more about how it works here: https://www.greenlightwindowfilms.com/anti-graffiti-films/anti-graffiti-window-film-dallas-commercial/
Mirror Film Benefits for Your Seattle Restaurant, Bar, or Public SpaceSeattleWindowFilm
Protect your mirrors from vandalism with mirror film for your Seattle business!
https://www.seattlewindowfilm.com/mirror-film-seattle-restaurant-bar-public-space/
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
This is an introductory presentation into the world of linings that are used in various industries. We will review what a lining is and what types of linings exist in the market place. We will also discuss how to choose or specify a lining system which includes surface preparation, proper application, repairs to lining defect and how fast a lining will be ready for service.
If you have any questions Contact us at:
http://info.international-pc.com/Solutions
What happens if the mortar or grout is allowed to freeze? When is it appropriate to enclose and heat masonry construction? How does protecting for cold weather affect a project budget? These questions and more are covered in this program discussing typical methods of preventing cold weather masonry construction problems and how to deal with them if they occur. Included is a discussion of how to interpret and correctly apply the code provisions for successful cold weather construction, and what innovative techniques are used by contractors to mitigate the effects of cold weather.
Mirror Film Benefits for Your Seattle Restaurant, Bar, or Public SpaceSeattleWindowFilm
Protect your mirrors from vandalism with mirror film for your Seattle business!
https://www.seattlewindowfilm.com/mirror-film-seattle-restaurant-bar-public-space/
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
This is an introductory presentation into the world of linings that are used in various industries. We will review what a lining is and what types of linings exist in the market place. We will also discuss how to choose or specify a lining system which includes surface preparation, proper application, repairs to lining defect and how fast a lining will be ready for service.
If you have any questions Contact us at:
http://info.international-pc.com/Solutions
What happens if the mortar or grout is allowed to freeze? When is it appropriate to enclose and heat masonry construction? How does protecting for cold weather affect a project budget? These questions and more are covered in this program discussing typical methods of preventing cold weather masonry construction problems and how to deal with them if they occur. Included is a discussion of how to interpret and correctly apply the code provisions for successful cold weather construction, and what innovative techniques are used by contractors to mitigate the effects of cold weather.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Learn how to have a lining project that is done safely, correctly and environmentally compliant. This presentations explains how planning can help you stay on schedule within budget and accrue no extras costs while meeting the expectations of your team. We share failure prevention engineering steps and identify components for a successful linings project, lining selection criteria, comparison of generic product type vs performance, and why choosing International Paint as your linings solution provider is the right choice.
In this issue of surfaces magazine, we travel far and wide as we take a look at a range of projects from Australia to Sweden.
- See how our Chartek® passive fire protection has been used on a chemical plant for 10 years
- Discover how Korean shipyards are experiencing a newbuilding boom for offshore drill ships
- Find out how we are helping a Chinese local water authority to cut the cost of its concrete protection
Specifying SPIROL Solid Pins provides the lowest cost and the most responsive delivery. Standards include SPIROL® Straight Pins, Knurled Pins, Headed Pins and Headed Knurled Pins. Standard materials have been selected to meet the requirements of ASME and ISO product standards and to cover a range of requirements as dictated by the market.
SPIROL Slotted Spring Pins are used as retaining pins, axle shafts, stop pins, hinge and pivot pins, cross bars, as well as locator pins. The 12-page catalog includes specifications for both metric ISO and inch and metric ASME slotted pins, and technical data, such as shear strength, required hole diameters, tolerances and available materials. Included are suggestions for hole preparation that will ensure you the best pin performance in your application.
Mirror Film for Your San Jose Restaurant, Bar, or Public SpaceSanJoseWindowFilm
Protect the mirrors in your restrooms and lobby area from damage! Learn about the benefits of mirror film for San Jose restaurants, bars, and buildings.
https://www.sanjosewindowfilm.com/mirror-film-san-jose-restaurant-bar-public-space/
Mirror Film Benefits for your Los Angeles Restaurant, Bar, or Public Spacelosangeleswindowfilm
Protect your mirrors from vandalism! Check out this spec sheet to learn about the benefits of mirror film for your Las Angeles bar, restaurant or public building.
Learn more: https://www.losangeleswindowfilm.com/mirror-film-los-angeles-restaurant-bar-public-space/
Mirror Film Benefits for Beverly Hills Restaurants, Bars & Public SpacesBeverlyHillsWindowFilm
Protect your bathroom mirrors with mirror film! This spec sheet explains everything you need to know!
For more info on the benefits of mirror film in Beverly Hills, read our recent blog post: https://www.beverlyhillswindowfilm.com/mirror-film-beverly-hills-restaurants-bars-public-spaces/
Mirror Film for Your Oakland Restaurant, Bar, or Public SpaceOaklandWindowFilm
Save money on property maintenance and keep your mirrors in good condition. Invest in mirror film for your Oakland restaurant, bar, or public building today!
https://www.oaklandwindowfilm.com/mirror-film-oakland-restaurant-bar-public-space/
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
2011 CTM Session 2: Terminology for Productsnovacsi
Focus on Division 07 to understand what happens when specifications terminology requires significant interpretation by the contractor or mixes up terminology, and the potential impact to prices, contracts, and project success.
Schedule and convene a pre-installation meeting prior to commencement of field operations with representatives of the following in attendance: Owner, Architect, General Contractor, certifier.
The focus of the seminar is to give participants a clearer understanding of the interrelationship in masonry buildings between materials, architecture, engineering and construction. Seemingly simple decisions can dramatically affect the building and understanding options available in materials, design and construction methods can result in more efficient and cost effective structures. Taught using a “Tips” format, the seminar highlights areas where proper understanding of masonry - from architectural and engineering design to materials to construction methods - can result in better completed buildings. Ways to use existing materials more effectively, explanations of the effect of one selection on another, discussions of new materials and current code and specification provisions are included.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Website: https://www.greenlightwindowfilms.com/cities-we-serve/colorado-springs/
Green Light Window Films Colorado Springs.
This file is from Colorado Springs, Colorado. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy
Learn how to have a lining project that is done safely, correctly and environmentally compliant. This presentations explains how planning can help you stay on schedule within budget and accrue no extras costs while meeting the expectations of your team. We share failure prevention engineering steps and identify components for a successful linings project, lining selection criteria, comparison of generic product type vs performance, and why choosing International Paint as your linings solution provider is the right choice.
In this issue of surfaces magazine, we travel far and wide as we take a look at a range of projects from Australia to Sweden.
- See how our Chartek® passive fire protection has been used on a chemical plant for 10 years
- Discover how Korean shipyards are experiencing a newbuilding boom for offshore drill ships
- Find out how we are helping a Chinese local water authority to cut the cost of its concrete protection
Specifying SPIROL Solid Pins provides the lowest cost and the most responsive delivery. Standards include SPIROL® Straight Pins, Knurled Pins, Headed Pins and Headed Knurled Pins. Standard materials have been selected to meet the requirements of ASME and ISO product standards and to cover a range of requirements as dictated by the market.
SPIROL Slotted Spring Pins are used as retaining pins, axle shafts, stop pins, hinge and pivot pins, cross bars, as well as locator pins. The 12-page catalog includes specifications for both metric ISO and inch and metric ASME slotted pins, and technical data, such as shear strength, required hole diameters, tolerances and available materials. Included are suggestions for hole preparation that will ensure you the best pin performance in your application.
Mirror Film for Your San Jose Restaurant, Bar, or Public SpaceSanJoseWindowFilm
Protect the mirrors in your restrooms and lobby area from damage! Learn about the benefits of mirror film for San Jose restaurants, bars, and buildings.
https://www.sanjosewindowfilm.com/mirror-film-san-jose-restaurant-bar-public-space/
Mirror Film Benefits for your Los Angeles Restaurant, Bar, or Public Spacelosangeleswindowfilm
Protect your mirrors from vandalism! Check out this spec sheet to learn about the benefits of mirror film for your Las Angeles bar, restaurant or public building.
Learn more: https://www.losangeleswindowfilm.com/mirror-film-los-angeles-restaurant-bar-public-space/
Mirror Film Benefits for Beverly Hills Restaurants, Bars & Public SpacesBeverlyHillsWindowFilm
Protect your bathroom mirrors with mirror film! This spec sheet explains everything you need to know!
For more info on the benefits of mirror film in Beverly Hills, read our recent blog post: https://www.beverlyhillswindowfilm.com/mirror-film-beverly-hills-restaurants-bars-public-spaces/
Mirror Film for Your Oakland Restaurant, Bar, or Public SpaceOaklandWindowFilm
Save money on property maintenance and keep your mirrors in good condition. Invest in mirror film for your Oakland restaurant, bar, or public building today!
https://www.oaklandwindowfilm.com/mirror-film-oakland-restaurant-bar-public-space/
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
2011 CTM Session 2: Terminology for Productsnovacsi
Focus on Division 07 to understand what happens when specifications terminology requires significant interpretation by the contractor or mixes up terminology, and the potential impact to prices, contracts, and project success.
Schedule and convene a pre-installation meeting prior to commencement of field operations with representatives of the following in attendance: Owner, Architect, General Contractor, certifier.
The focus of the seminar is to give participants a clearer understanding of the interrelationship in masonry buildings between materials, architecture, engineering and construction. Seemingly simple decisions can dramatically affect the building and understanding options available in materials, design and construction methods can result in more efficient and cost effective structures. Taught using a “Tips” format, the seminar highlights areas where proper understanding of masonry - from architectural and engineering design to materials to construction methods - can result in better completed buildings. Ways to use existing materials more effectively, explanations of the effect of one selection on another, discussions of new materials and current code and specification provisions are included.
If you are looking for Access Panels, then Dutco Tennant LLC is your perfect choice. Dutco Tennant LLC is a number one provider of access panel equipment in the Gulf and the Middle East, and a famous access panel supplier in Dubai. We have completed a number of projects in this region supplying a vast number of such products to meet different requirements.
Website: https://www.customtintsolutions.com/cities/austin/
Custom Tint Solutions Window Film Austin.
This file is from Austin, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Custom Tint Solutions hopes you enjoy.
Case studies on improving testing processes for batteries, interior components, composites and electronics.
Presented at Automotive Testing Expo Europe 2016.
Dimex German uPVC Windows & Doors SystemsDIMEX Windows
"DIMEX German Brand UPVC Profiles (PREMIUM & PROJECT Series)
– FOR BUILDERS, ARCHITECTS & UPVC WINDOWS FABRICATORS"
THOSE WHO SAY AND DON’T DO IT !
AGAINST – DIMEX SAYS & DO IT
Increase natural light in your office. Brighten your space naturally by installing window film for your Dallas commercial space.
Get more details here: https://www.greenlightwindowfilms.com/dallas/brighten-dallas-office-window-film/
Property owners spend thousands of dollars each year in vain on graffiti removal services that hardly ever work. Save money on vandalism repairs with anti graffiti surface film for your Dallas building. https://www.greenlightwindowfilms.com/dallas/anti-graffiti-surface-film-dallas-businesses/
The benefits of window film for buildings of all types here in Dallas are immense and could impact your bottom line as well! https://www.greenlightwindowfilms.com/commercial-window-film/glare-reducing-window-film-for-offices/
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Website: https://www.greenlightwindowfilms.com/cities-we-serve/dallas/
Green Light Window Films Dallas.
This file is from Dallas, Texas. It contains information about window tinting. All information and rights to the material are copyrighted by the company to whom it belongs to. Thank you for viewing. Green Light Window Film hopes you enjoy.
Unlock the potential of Ruby on Rails for your next project. Hire RoR Developers from Semiosis for scalable and efficient web solutions. With expertise in RoR development, our team crafts robust applications to meet your business goals. Dial +1 9177322215 to collaborate with us and elevate your online presence.
Courier & Package Tracking System Actually WorksIn Targos
In the world of modern logistics, the courier and package tracking system stands as a pivotal tool, offering transparency and efficiency throughout the shipping process. Let’s delve into the intricacies of courier and package tracking systems and explore how INTARGOS plays a key role in this domain.
What Are the Latest Trends in Endpoint Security for 2024?VRS Technologies
In this PDF, Discover the top 2024 endpoint security trends, including zero trust, AI integration, XDR, cloud security, and enhanced mobile protection. VRS Technologies LLC supplies the top level Endpoint Security Service Dubai. For More Info Contact us: +971 56 7029840 Visit us: https://www.vrstech.com/endpoint-security-solutions.html
BesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand...gitapress3
love problem solution astrologer
best love problem solution astrologer
online love problem solution astrologer
love problem solution astrologer in india
love problem solution astrologer in kolkata
love problem solution astrologer near me
love problem solution astrologer in ludhiana
love problem solution astrologer acharya ji
love problem solution astrologer in delhi
love problem solution astrologer amritsar
astrologer love problem solution
astrologer for love problem
astrology love problem solution
love solution astrologer
love problem solution specialist astrologer
love problem solution by astrologer
astrology love problem solution baba ji
love problem solve astrologer
love problem solution usa
love problem solution expert astrologer
astrologer for love marriage problem solution
love problem solution astrologer in mumbai
love problem solution muslim astrologer
love marriage specialist astrologer problem solution
famous love astrologer
love problem solution astrologer specialist
love problem solution astrologer tantrikBesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand baba ji LoVe marriage specialist Uk USA LonDOn panDit ji
All Trophies at Trophy-World Malaysia | Custom Trophies & Plaques Supplier. Come to our Trophy Shop today and check out all our variety of Trophies available. We have the widest range of Trophies in Malaysia. Our team is always ready to greet your needs and discuss with you on your custom Trophy for your event. Rest assured, you will be with the best Trophy Supplier in Malaysia. The official Trophy Malaysia. Thank you for your support.
Business Solutions with .NET Development in Quantum Computing.pdfQServices Inc.
Unlock the power of quantum computing with QServices. Our .NET experts deliver cutting-edge solutions to drive your business forward. Experience the future of computing and gain a competitive edge today.
Are Gutters Necessary? Explore the details now!AmeliaLauren3
Gutters are typically installed at a slight downward slope to allow water to flow freely towards downspouts or drains – the downspout being the vertical pipe attached to the gutters. The water is subsequently transported by the downspout to either the ground or an underground drainage system. Maintaining a gutter system that is free of blockages and functional requires regular maintenance.
But, many wonder in what situations gutters are required and not required. In this ppt we will discuss in detail the matter, ‘Are Gutters Necessary?’
Blessed Marine Automation offers cutting-edge marine automation solutions tailored to enhance vessel efficiency and safety. From advanced control systems to remote monitoring, our services empower maritime operations worldwide. Explore our comprehensive range of products and services to optimize your vessel's performance. https://www.blessedmarineautomation.com/
Unlocking Insights: AI-powered Enhanced Due Diligence Strategies for Increase...RNayak3
Explore how a risk-based approach to Enhanced Due Diligence can deliver effective Anti-Money Laundering (AML) compliance and monitoring in banking and financial services.
Get your dream bridal look with top North Indian makeup artist - Pallavi KadalePallavi Makeup Artist
Achieve your dream wedding day look with renowned North Indian bridal makeup artist, Pallavi Kadale. With years of experience, her expert techniques and skills will leave you looking flawless and radiant. Book today for your perfect bridal makeover.
Upvc Bathroom Doors Price and Designs In Keralabpshafeeque
UPVC Bathroom Doors Price in Kerala
When renovating or designing a bathroom, the choice of doors plays a pivotal role in ensuring both functionality and aesthetics. In Kerala, UPVC (Unplasticized Polyvinyl Chloride) bathroom doors have gained popularity for their durability, water resistance, and modern designs. This article delves into the pricing of UPVC bathroom doors in Kerala and why they are a preferred choice for homeowners.
#### Benefits of UPVC Bathroom Doors
UPVC bathroom doors offer several advantages, making them an ideal choice for the humid climate of Kerala:
1. **Water Resistance**: Unlike wooden doors, UPVC doors do not swell or warp when exposed to moisture, making them perfect for bathrooms.
2. **Durability**: These doors are resistant to termites and corrosion, ensuring a long lifespan.
3. **Low Maintenance**: UPVC doors require minimal upkeep, saving homeowners time and effort.
4. **Energy Efficiency**: They provide good insulation, helping maintain a comfortable bathroom temperature and reducing energy costs.
5. **Aesthetic Variety**: Available in various colors and designs, UPVC doors can complement any bathroom decor, from modern to traditional.
#### Price Range of UPVC Bathroom Doors in Kerala
The cost of UPVC bathroom doors in Kerala varies depending on factors such as size, design, and additional features. Here's a general overview of the price range:
- **Basic Models**: Simple UPVC bathroom doors start from ₹2,500 to ₹5,000. These doors are functional and offer essential benefits like water resistance and durability.
- **Mid-Range Models**: For more intricate designs or additional features such as frosted glass panels or metallic handles, prices range between ₹5,000 and ₹10,000.
- **Premium Models**: High-end UPVC bathroom doors, which may include custom designs, advanced locking systems, and superior finishes, can cost anywhere from ₹10,000 to ₹20,000 or more.
#### Conclusion
UPVC bathroom doors are an excellent investment for homes in Kerala, offering a blend of practicality and style. With a wide range of prices and designs available, homeowners can easily find a UPVC door that fits their budget and enhances their bathroom’s aesthetic appeal. When choosing a UPVC bathroom door, consider the specific needs of your space and the long-term benefits these doors provide. Investing in a quality UPVC bathroom door ensures a durable, low-maintenance, and stylish addition to your home.
Earth moving equipment refers to heavy-duty machines used in construction, mining, agriculture, and other industries to move large amounts of earth, soil, and other materials. These machines include excavators, bulldozers, loaders, and backhoes, which are essential for tasks such as digging, grading, and leveling land.
Earthmovers is a leading brand in the industry, known for providing reliable and high-performance earth moving equipment. Their machines are designed to handle the toughest jobs with efficiency and precision, ensuring optimal productivity on any project.
Nature’s Paradise Glamorous And Sustainable Designs For Your Outdoor Living S...Landscape Express
Create a harmonious blend of luxury and sustainability in your outdoor living space with eco-friendly kitchens, enchanting water features, and lush plant landscaping. Embrace energy-efficient appliances, solar lighting, rainwater harvesting, and native plants to enhance beauty while reducing environmental impact. Transform your space into a glamorous, eco-conscious retreat for relaxation and social gatherings.
The Jamstack Revolution: Building Dynamic Websites with Static Site Generator...Softradix Technologies
In this infographic, the Jamstack architecture emphasizes pre-rendered content and decoupling the frontend from the backend. It leverages static site generators (SSGs) to create fast-loading HTML files and APIs for dynamic functionality. Benefits include improved performance, enhanced security, scalability, and ease of deployment. Real-world examples include Netlify, Gatsby, and Contentful. https://softradix.com/web-development/
Are Seamless Gutters Worth It? Explore nowacadiaborton
Seamless gutters live up to their name: they are uncomplicated gutters that flow freely without needless joins or seams. They do have seams, but they are limited to the downspouts and corners. Painted metal is used to make seamless gutters. If you're wondering why seamless gutters could be preferable to traditional ones, keep reading this ppt for the advantages.
BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem sol...gitapress3
TOP No AsTro 1 black magic SpecialiSt UK baba ji +91-9463629203 VashIkaRan blaCk maGiC specialist in uSA Uk England Luxembourg CanAdA America BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem solution Uk USA america england LonDon Divorce problem solution astroloGer
Maximizing Efficiency with Integrated Water Management SystemsIrri Design Studio
Integrated water management systems are essential for improving irrigation design sustainability and efficiency. Irri Design Studio helps customers maximize water consumption, reduce waste, and encourage responsible stewardship of water resources by utilizing cutting-edge technology like drone-based construction updates and BIM modeling. The increasing issues of water shortage and environmental protection require an all-encompassing strategy to water management. Irrigation systems may be planned to optimize water consumption efficiency while guaranteeing the safety of people and the environment by putting new ideas and concepts into practice. Visit our website https://www.irridesignstudio.com/ for more information.
2. Graffiti Shield’s product line includes:
Glass Shield is a 6 mil and 4 mil thick Anti-Graffiti abatement film designed to be a
clear undetectable sacrificial coating on glass.
Metal Shield is a thick surface protection film formulated for application to existing
metal surfaces and to replicate a Stainless Steel or Brushed Aluminum finish.
Mirror Shield offers the reflective look of a mirror, while providing protection to the
surface underneath.
Graffiti Shield offers a full line of custom products and has the ability to produce
unique custom products for almost any substrate.
Graffiti Shield specializes in the manufacturing and installation of surface protection films that are
commonly used for graffiti abatement property protection and damage control. With a project
portfolio that spans a multitude of industries; including mass transit, sports stadiums, fast food
restaurants, universities, and healthcare facilities; Graffiti Shield offers unique solutions to common
and costly surface damage problems in many commercial environments.
Surfaces protected by Graffiti Shield products include:
• Glass
• Stainless Steel
• Mirrors
• Stone
• Metal Cladding
• Aluminum
Introduction
• Polycarbonate
• Smooth Laminates
• Metal Frames
4. GlassShield
4-Mil/6-Mil
GlassShieldPoly
GlassShieldNH70
6-Mil/12-Mil
MetalShieldBrushed
Aluminum
MetalShield
StainlessSteel
MetalShield
BrushedGold
MirrorShield
CustomShield
PRODUCT TESTING AND SPECIFICATIONS
TESTING
Thickness .004/.006 0.006 .006/.0125 0.0065 0.006 0.008 0.005 .005/.0075
Widths 36”/48”/60”/72” 60” 59” 59” 60” 59” 60” 47”/59”
Liner Thickness 0.001 0.001 0.003 0.003 0.003 0.003 0.003 0.003
Scratch Resistant Z26.1 Test 17 YES YES YES YES YES YES YES N/A
Chemical Resistant Z26.1 Test 19 YES YES YES YES YES YES YES N/A
Acid Resistant YES YES YES YES YES YES YES N/A
ASTME84-16Flame&SmokeSpread Class A Class A Class A Class A Class A Class A Class A *Pass
ASTM E-162 Flame Spread Pass Pass Pass Pass Pass Pass Pass *Pass
ASTM E-662-17 Smoke Generation Pass Pass Pass Pass Pass Pass Pass *Pass
ASTM D-882 Tensil Pass Pass Pass Pass Pass Pass Pass *Pass
ASTM D-3330 Peel Pass Pass Pass Pass Pass Pass Pass *Pass
ANSIZ97.1NationalStd.forSafetyGlazing Pass Pass Pass N/A N/A N/A Pass *Pass
CPSC 16 CFR 1201 Cat 1 Pass Pass Pass N/A N/A N/A Pass *Pass
Z26.1 Test 1,2,28 Pass Pass Pass N/A N/A N/A N/A N/A
SPECIFICATIONS
Solar Heat Gain Coefficient 0.82 0.8 N/A 0.2 0.18 N/A 0.04 N/A
Total Solar Energy Rejected 17% 19% 44% 78.2% 80.9% N/A 95.7% N/A
Solar Energy Reflected 11% 10% N/A 48.0% 42.2% N/A 88% N/A
Solar Energy Absorbed 10% 15% N/A 41.0% 56.6% N/A 11% N/A
Solar Energy Transmitted 82% 73% N/A 1.1% 1.2% N/A 1% N/A
Visible Light Reflected 10% 11% 7% 54.0% 40.5% N/A 89% N/A
Visible Light Transmitted 88% 83% 65% 0.4% 0.6% N/A 0% N/A
UV Rejection 99% 93% 99% 99% 99% N/A 99% N/A
IR Rejection 24% N/A 37% 97.5% 98.3% N/A 98.7% N/A
5. Surfaces protected by Glass Shield products include:
• Public Map Display Cases
• Signage
• Fuel Pumps
• Vending Machines
• Vending Ticket Machines
• Elevators / Escalators
• Glass
• Retail Storefronts
• Mirrors
Glass
Shield
Glass Shield is a 6 mil and 4 mil thick Anti-Graffiti abatement film designed to be a clear,
undetectable sacrificial coating on glass. Once damaged by vandals in the form of scratching,
carving, or even acid, it can simply be removed by our technicians and replaced in moments
giving your glass a “new like” appearance.
Finishing Options:
• Custom Part Numbers
for Easy Re-orders
• Radius Corners & Custom
Printed Graphic
• CNC Pre-Cuts
6. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Glass Surface Protection
Benefits
• Protects glass from sharp object etching
• Acid, paint, and marker resistant
• 99% UV A & B protec on
• Sacrificial invisible protec on
• Removable adhesive system
• 1/4 the cost of new glass
Uses
• Storefronts
• Restroom mirrors
• Escalator and elevators
• Vending and cket vending machines
• Fuel pumps
• Displays and signs
Specifica ons
Thickness .004 (4-Mil)
Liner Thickness .001 (1-Mil)
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
ANSI Z97.1 Pass
CPSC 16 CFR1201 Cat I Pass
Scratch Resistant Yes
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
7. SECTION 08800
WINDOW FILM
08800
SECTION 08800
WINDOW FILM
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Anti-graffiti window films for glazing systems and mirrors.
1.2 RELATED SECTIONS
A. Section 08300 – Mirrors; mirrors for architectural application to receive window film.
B. Section 08500 - Windows; windows to receive architectural window film.
C. Section 08600 - Skylights; glass skylights to receive architectural window film.
D. Section 08800 - Glazing; general glazing applications to receive architectural window film.
E. Section 08900 - Glazed Curtain Walls; curtain walls to receive architectural window film.
1.3 REFERENCES
A. American National Standards Institute (ANSI):
1. ANSI Z97.1 - Safety Performance Specifications and Methods of Test for Safety Glazing
Material Used in Buildings.
2. ANSI Z26.1 Safety Glazing Materials
B. American Society for Testing and Materials (ASTM):
1. ASTM D 882 - Tensile Properties of Thin Plastic Sheeting.
2. ASTM D 3330 - Peel-Adhesion at 180 Degree Angle.
3. ASTM E 84-16 - Surface Burning Characteristics of Building Materials.
4. ASTM E 162-16 – Flame Spread
5. ASTM E 662-17 – Smoke Generation
C. Consumer Product Safety Commission
1. CPSC 16 CFR 1201
ver 10.17 Page 1
8. SECTION 08800
WINDOW FILM
08800
1.4 PERFORMANCE REQUIREMENTS
A. Fire Performance: Surface burning characteristics when tested in accordance ASTM E 84-16:
1. Flame Spread: 25, maximum.
2. Smoke Developed: 450, maximum.
3. Must meet Class A Interior Wall and Ceiling Finish
B. Abrasion Resistance: Film must have a surface coating that is resistant to abrasion such that, less
than a 5% change of transmitted light haze will result. This is in accordance with ANSI Z26.1 using
50 cycles and 300 grams of weight and the CF 10 Calbrase wheel.
1.5 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Selection Samples: For each film specified, submit film samples representing
manufacturer's film type for the project.
D. Verification Samples: For each film specified, two samples representing film color and pattern.
E. Performance Submittals: Provide laboratory data of emissivity and calculated window U-Factors for
various outdoor temperatures based upon established calculation procedure defined by the
ASHRAE Handbook of Fundamentals, Chapter 29, or Lawrence Berkeley Laboratory Window 5.2
Computer Program.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifications: All primary products specified in this section will be supplied by a
single manufacturer with a minimum of ten years’ industry experience.
B. Installer Qualifications: All products listed in this section are to be installed by a single installer with a
minimum of five years demonstrated experience in installing products of the same type and scope
as specified.
1. Provide documentation that the installer is authorized by the Manufacturer to perform Work
specified in this section.
2. Provide proof of ability to purchase material through authorized distributor or manufacture.
3. Material is to be precut and made to fit panel with no more than 1/8” tolerance and have .2
radius corners to alleviate peeling at corners.
4. Precutting must be done via CNC or similar device to ensure clean cutting is done.
5. Part number or cataloging is recommended. Engraved in predetermined corner on surface
of film with minimum ½ font for viewing and cataloging.
C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application
workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship, color, and sheen are approved by
Architect.
3. Refinish mock-up area as required to produce acceptable work.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in
accordance with requirements of local authorities having jurisdiction.
C. Please recycle materials to reduce carbon footprint. ver 10.17 Page 2
9. SECTION 08800
WINDOW FILM
08800
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under environmental
conditions outside manufacturer's absolute limits.
1.9 WARRANTY
A. Anti-graffiti films are warranted for a period of 2 years when installed outdoors and installed indoors.
Installation must be done to manufactures guidelines. Warranty is for material failure, not against
vandalism.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Graffiti Shield, Inc.
2940 E. La Palma Ave Suite D
Anaheim, CA 92806
(714) 575-1100
sales@graffiti-shield.com
www.graffiti-shield.com
B. Acceptable Distributor/Installer:
C. Requests for substitutions will be considered in accordance with provisions of Section
1.6.
2.2 ANTI-GRAFFITI WINDOW AND SURFACE FILM
A. Anti-Graffiti Window and Surface Film: Glass Shield 4-Mil Anti-Graffiti Film. Optically clear
polyester film with a durable acrylic abrasion resistant coating over one surface and a pressure
sensitive adhesive over the other. The film may be laminated to other clear polyester film layers to
achieve the desired thickness of the film.
1. Physical / Mechanical Performance Properties:
a. Film Color: Clear.
b. Thickness: Nominal 4.0 mils (.004 in.).
c. Tensile Strength (ASTM D 882): 28,000-30,000 lbs./psi.
d. Break Strength (ASTM D 882) (Per Inch Width): 190 lbs.
e. Elongation at Break (ASTM D 882): >100 percent.
f. Peel Strength: 1,000 g/inch. (ASTM D 3330).
g. Abrasion Resistance: Film must have a surface coating that is resistant to abrasion
such that, less than a 5% change of transmitted light haze will result. This is in
accordance with ANSI Z26.1 using 50 cycles and 300 grams of weight and the CF 10
Calbrase wheel.
h. Safety Glazing Materials Performance Characteristics (ANSI Z26.1)
Pass The Following Tests:
1. Light stability test 1
2. Luminous transmission test 2
3. Abrasion test 17
4. Chemical resistance test 19
5. Temperature change test 28
i. Impact (ANSI Z97.1 and CPSC CFR 1201)
1. Meet requirements of CPSC, Category I, ANSI Class B
j. Surface Burn Radiant Heat Source (ASTM E 162-16)
1. Radiant panel index of 0 (zero)
k. Surface Burn Building Materials (ASTM E 84-16)
ver 10.17 Page 3
10. SECTION 08800
WINDOW FILM
08800
1. Flame spread index = 0
2. Smoke develop index = 115
l. Optical Density of Smoke (ASTM E 662-17)
1. Ds = 0 @ 1.5 min
2. Ds = 0 @ 4 min
3. Ds Max < 53 Radiant Source
4. Ds Max < 84 Pilot Flame
2. Uniformity: No noticeable pin holes, streaks, thin spots, scratches, banding or other optical
defects.
3. Variation in Total Transmission across the Width: Less than 2 percent over the average at
any portion along the length.
4. Identification: Labeled as to Manufacturer as listed in this Section.
5. Solar Performance Properties: Film applied to 1/4 Inch (6.4 mm) thick clear glass.
a. Visible Light Transmission (ÅSTM E 903): 88 percent.
b. Total Solar Reflection (ASTM E 903): Not more than 10 percent.
c. Ultraviolet Transmission (ÅSTM E 903): Less than 1 percent.
d. Total Solar Energy Rejection: 17 percent
6. Acid Resistant Top Coat. Must have an acid resistant top coat that does not
mar during a vandal attack when acid etching agents are used. Acid agent must
wipe off clean and leave no residue in top coat.
PART 3 EXECUTION
3.1 EXAMINATION
A. If preparation of glass surfaces is the responsibility of another installer, notify Architect in writing of
deviations from manufacturer's recommended installation tolerances and conditions.
1. Glass surfaces receiving new film should first be examined to verify that they are free from
defects and imperfections, which will affect the final appearance:
B. Do not proceed with installation until glass surfaces have been properly prepared and deviations
from manufacturer's recommended tolerances are corrected. Prepare surfaces using the methods
recommended by the manufacturer for achieving the best result under the project conditions.
C. Commencement of installation constitutes acceptance of conditions.
3.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best
result for the substrate under the project conditions.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions.
B. Tools needed: Spray bottle/tank, slip solution, squeegee/s, snap off blade knife, plastic hard card,
lint free towels, SS scraper or nonabrasive scrub pad.
C. Cut film edges neatly and square at a uniform distance of 1/8 inch (3 mm) to 1/16 inch
(1.5 mm) of window sealant. Use new snap off blades as needed.
D. Remove film and clean glass surface with slip solution (slip solution is composed of ¾ oz. (4
pumps) of slip solution per quart of filtered water) and nonabrasive scrub pad or SS scraper to
remove all debris from surface. Clean all edges of frames to clear them of any additional
debris.
E. Remove release liner and spray slip solution on adhesive thoroughly and mist the glass to
facilitate proper positioning of film.
D. Apply film to glass and position correctly, then lightly spray film with slip solution.
ver 10.17 Page 4
11. SECTION 08800
WINDOW FILM
08800
E. Squeegee the top section from middle to the left, then to the right. Next squeegee down center
from top to bottom. Then from center to the left with overlapping passes towards the bottom, then
from the center to the right with overlapping passes towards the bottom. Spray slip solution to
film and repeat squeegee pattern a second time.
G. Wrap lint free towel around plastic hard card and press any additional water out around all edges.
Once done, inspect entire surface for any left over water and remove.
H. Upon completion of film application, allow 30 days for moisture from film installation to dry
thoroughly, and to allow film to dry flat with no moisture dimples when viewed under normal
viewing conditions.
3.4 CLEANING AND PROTECTION
A. Remove left over material and debris from Work area. Use necessary means to protect film
before, during, and after installation.
B. Touch-up, repair or replace damaged products before Substantial Completion.
C. After application of film, wash film using common window cleaning solutions, including ammonia
solutions, 30 days after application. Do not use abrasive type cleaning agents and bristle brushes
to avoid scratching film. Use synthetic sponges or soft cloths.
END OF SECTION
ver 10.17 Page 5
12. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Glass Surface Protection
Benefits
• Protects glass from sharp object etching
• Acid, paint, and marker resistant
• 99% UV A & B protec on
• Sacrificial invisible protec on
• Removable adhesive system
• 1/4 the cost of new glass
Uses
• Storefronts
• Restroom mirrors
• Escalator and elevators
• Vending and cket vending machines
• Fuel pumps
• Displays and signs
Specifica ons
Thickness .006 (6-Mil)
Liner Thickness .001 (1-Mil)
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
ANSI Z97.1 Pass
CPSC 16 CFR1201 Cat I Pass
Scratch Resistant Yes
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
13. SECTION 08800
WINDOW FILM
08800
SECTION 08800
WINDOW FILM
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Anti-graffiti window films for glazing systems and mirrors.
1.2 RELATED SECTIONS
A. Section 08300 – Mirrors; mirrors for architectural application to receive window film.
B. Section 08500 - Windows; windows to receive architectural window film.
C. Section 08600 - Skylights; glass skylights to receive architectural window film.
D. Section 08800 - Glazing; general glazing applications to receive architectural window film.
E. Section 08900 - Glazed Curtain Walls; curtain walls to receive architectural window film.
1.3 REFERENCES
A. American National Standards Institute (ANSI):
1. ANSI Z97.1 - Safety Performance Specifications and Methods of Test for Safety Glazing
Material Used in Buildings.
2. ANSI Z26.1 Safety Glazing Materials
B. American Society for Testing and Materials (ASTM):
1. ASTM D 882 - Tensile Properties of Thin Plastic Sheeting.
2. ASTM D 3330 - Peel-Adhesion at 180 Degree Angle.
3. ASTM E 84-16 - Surface Burning Characteristics of Building Materials.
4. ASTM E 162-16 – Flame Spread
5. ASTM E 662-17 – Smoke Generation
C. Consumer Product Safety Commission
1. CPSC 16 CFR 1201
ver 10.17 Page 1
14. SECTION 08800
WINDOW FILM
08800
1.4 PERFORMANCE REQUIREMENTS
A. Fire Performance: Surface burning characteristics when tested in accordance ASTM E 84-16:
1. Flame Spread: 25, maximum.
2. Smoke Developed: 450, maximum.
3. Must meet Class A Interior Wall and Ceiling Finish
B. Abrasion Resistance: Film must have a surface coating that is resistant to abrasion such that,
less than a 5% change of transmitted light haze will result. This is in accordance with ANSI
Z26.1 using 50 cycles and 300 grams of weight and the CF 10 Calbrase wheel.
1.5 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Selection Samples: For each film specified, submit film samples representing
manufacturer's film type for the project.
D. Verification Samples: For each film specified, two samples representing film color and pattern.
E. Performance Submittals: Provide laboratory data of emissivity and calculated window U-Factors for
various outdoor temperatures based upon established calculation procedure defined by the
ASHRAE Handbook of Fundamentals, Chapter 29, or Lawrence Berkeley Laboratory Window 5.2
Computer Program.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifications: All primary products specified in this section will be supplied by a
single manufacturer with a minimum of ten years’ industry experience.
B. Installer Qualifications: All products listed in this section are to be installed by a single installer with a
minimum of five years demonstrated experience in installing products of the same type and scope
as specified.
1. Provide documentation that the installer is authorized by the Manufacturer to perform Work
specified in this section.
2. Provide proof of ability to purchase material through authorized distributor or manufacture.
3. Material is to be precut and made to fit panel with no more than 1/8” tolerance and have .2
radius corners to alleviate peeling at corners.
4. Precutting must be done via CNC or similar device to ensure clean cutting is done.
5. Part number or cataloging is recommended. Engraved in predetermined corner on surface
of film with minimum ½ font for viewing and cataloging.
C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application
workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship, color, and sheen are approved by
Architect.
3. Refinish mock-up area as required to produce acceptable work.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in
accordance with requirements of local authorities having jurisdiction.
C. Please recycle materials to reduce carbon footprint.
ver 10.17 Page 2
15. SECTION 08800
WINDOW FILM
08800
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under environmental
conditions outside manufacturer's absolute limits.
1.9 WARRANTY
A. Anti-graffiti films are warranted for a period of 2 years when installed outdoors and installed indoors.
Installation must be done to manufactures guidelines. Warranty is for material failure, not against
vandalism.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Graffiti Shield, Inc.
2940 E. La Palma Ave Suite D
Anaheim, CA 92806
(714) 575-1100
sales@graffiti-shield.com
www.graffiti-shield.com
B. Acceptable Distributor/Installer:
C. Requests for substitutions will be considered in accordance with provisions of Section
1.6.
2.2 ANTI-GRAFFITI WINDOW AND SURFACE FILM
A. Anti-Graffiti Window and Surface Film: Glass Shield 6-Mil Anti-Graffiti Film. Optically clear
polyester film with a durable acrylic abrasion resistant coating over one surface and a pressure
sensitive adhesive over the other. The film may be laminated to other clear polyester film layers to
achieve the desired thickness of the film.
1. Physical / Mechanical Performance Properties:
a. Film Color: Clear.
b. Thickness: Nominal 6.0 mils (.006 in.).
c. Tensile Strength (ASTM D 882): 28,000-30,000 lbs./psi.
d. Break Strength (ASTM D 882) (Per Inch Width): 190 lbs.
e. Elongation at Break (ASTM D 882): >100 percent.
f. Peel Strength: 1,000 g/inch. (ASTM D 3330)
g. Abrasion Resistance: Film must have a surface coating that is resistant to abrasion
such that, less than a 5% change of transmitted light haze will result. This is in
accordance with ANSI Z26.1 using 50 cycles and 300 grams of weight and the CF 10
Calbrase wheel.
h. Safety Glazing Materials Performance Characteristics (ANSI Z26.1)
Pass The Following Tests:
1. Light stability test 1
2. Luminous transmission test 2
3. Abrasion test 17
4. Chemical resistance test 19
5. Temperature change test 28
i. Impact (ANSI Z97.1 and CPSC CFR 1201)
1. Meet requirements of CPSC, Category I, ANSI Class B
j. Surface Burn Radiant Heat Source (ASTM E 162-16)
1. Radiant panel index of 0 (zero)
k. Surface Burn Building Materials (ASTM E 84-16)
ver 10.17 Page 3
16. SECTION 08800
WINDOW FILM
08800
1. Flame spread index = 0
2. Smoke develop index = 115
l. Optical Density of Smoke (ASTM E 662-17)
1. Ds = 0 @ 1.5 min
2. Ds = 0 @ 4 min
3. Ds Max < 53 Radiant Source
4. Ds Max < 84 Pilot Flame
2. Uniformity: No noticeable pin holes, streaks, thin spots, scratches, banding or other optical
defects.
3. Variation in Total Transmission across the Width: Less than 2 percent over the average at
any portion along the length.
4. Identification: Labeled as to Manufacturer as listed in this Section.
5. Solar Performance Properties: Film applied to 1/4 Inch (6.4 mm) thick clear glass.
a. Visible Light Transmission (ÅSTM E 903): 88 percent.
b. Total Solar Reflection (ASTM E 903): Not more than 10 percent.
c. Ultraviolet Transmission (ÅSTM E 903): Less than 1 percent.
d. Total Solar Energy Rejection: 17 percent
6. Acid Resistant Top Coat. Must have an acid resistant top coat that does not
mar during a vandal attack when acid etching agents are used. Acid agent must
wipe off clean and leave no residue in top coat.
PART 3 EXECUTION
3.1 EXAMINATION
A. If preparation of glass surfaces is the responsibility of another installer, notify Architect in writing of
deviations from manufacturer's recommended installation tolerances and conditions.
1. Glass surfaces receiving new film should first be examined to verify that they are free from
defects and imperfections, which will affect the final appearance:
B. Do not proceed with installation until glass surfaces have been properly prepared and deviations
from manufacturer's recommended tolerances are corrected. Prepare surfaces using the methods
recommended by the manufacturer for achieving the best result under the project conditions.
C. Commencement of installation constitutes acceptance of conditions.
3.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best
result for the substrate under the project conditions.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions.
B. Tools needed: Spray bottle/tank, slip solution, squeegee/s, snap off blade knife, plastic hard card,
lint free towels, SS scraper or nonabrasive scrub pad.
C. Cut film edges neatly and square at a uniform distance of 1/8 inch (3 mm) to 1/16 inch
(1.5 mm) of window sealant. Use new snap off blades as needed.
D. Remove film and clean glass surface with slip solution (slip solution is composed of ¾ oz. (4
pumps) of slip solution per quart of filtered water) and nonabrasive scrub pad or SS scraper to
remove all debris from surface. Clean all edges of frames to clear them of any additional
debris.
E. Remove release liner and spray slip solution on adhesive thoroughly and mist the glass to
facilitate proper positioning of film.
D. Apply film to glass and position correctly, then lightly spray film with slip solution.
ver 10.17 Page 4
17. SECTION 08800
WINDOW FILM
08800
E. Squeegee the top section from middle to the left, then to the right. Next squeegee down center
from top to bottom. Then from center to the left with overlapping passes towards the bottom, then
from the center to the right with overlapping passes towards the bottom. Spray slip solution to
film and repeat squeegee pattern a second time.
G. Wrap lint free towel around plastic hard card and press any additional water out around all edges.
Once done, inspect entire surface for any left over water and remove.
H. Upon completion of film application, allow 30 days for moisture from film installation to dry
thoroughly, and to allow film to dry flat with no moisture dimples when viewed under normal
viewing conditions.
3.4 CLEANING AND PROTECTION
A. Remove left over material and debris from Work area. Use necessary means to protect film
before, during, and after installation.
B. Touch-up, repair or replace damaged products before Substantial Completion.
C. After application of film, wash film using common window cleaning solutions, including ammonia
solutions, 30 days after application. Do not use abrasive type cleaning agents and bristle brushes
to avoid scratching film. Use synthetic sponges or soft cloths.
END OF SECTION
ver 10.17 Page 5
18. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Glass Surface Protection
Benefits
• Protects glass from sharp object etching
• Acid, paint, and marker resistant
• 99% UV A & B protec on
• 70% IR rejec on
• 44% Total solar energy rejec on
• Glare reduc on
• Sacrificial protec on
• Removable adhesive system
• 1/4 the cost of new glass
Uses
• Storefronts
• Light rail trains
• Buses
Specifica ons
Thickness .006 (6-Mil)
Liner Thickness .003 (3-Mil)
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162=16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
ANSI Z97.1 Pass
CPSC 16 CFR1201 Cat I Pass
Scratch Resistant Yes
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
19. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Glass Surface Protection
Benefits
• Protects glass from sharp object etching
• Acid, paint, and marker resistant
• 99% UV A & B protec on
• 70% IR rejec on
• 44% Total solar energy rejec on
• Glare reduc on
• Sacrificial protec on
• Removable adhesive system
• 1/4 the cost of new glass
Uses
• Storefronts
• Light rail trains
• Buses
Specifica ons
Thickness .012 (12-Mil)
Liner Thickness .003 (3-Mil)
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
ANSI Z97.1 Pass
CPSC 16 CFR1201 Cat I Pass
Scratch Resistant Yes
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
20. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Polycarbonate/Plastic
Surface Protection
Benefits
• Protects poly and plas cs from sharp object
etching
• Acid, paint, and marker resistant
• 99% UV A & B protec on
• Sacrificial invisible protec on
• Removable adhesive system
Uses
• Storefronts
• Restroom mirrors
• Escalator and elevators
• Vending and cket vending machines
• Fuel pumps
• Displays and signs
Specifica ons
Thickness .006 (6-Mil)
Liner Thickness .001 (1-Mil)
Scratch Resistant Yes
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
Poly/Plas cs
21. Metal
Shield
Surfaces protected by Metal Shield products include:
• Sign Posts
• Fuel Pumps
• Wall Panels
• Vending Machines
• Vending Ticket Machines
• Fast Food Counter Tops
• Elevators
• Escalators
• Restroom Partitions
Metal Shield is a thick surface protection film formulated for application to existing metal
surfaces and to replicate a Stainless Steel or Brushed Aluminum finish. This film is thick
enough to protect the substrate from normal damage or to cover up existing damage while
bringing the original surface back to a new, factory finish.
Finishing Options:
• Custom Part Numbers
for Easy Re-orders
• Radius Corners & Custom
Printed Graphic
• CNC Pre-Cuts
22. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Metal Surface Protection
Benefits
• Protects surfaces from sharp object etching
• Acid, paint, and marker resistant
• Sacrificial protec on
• Removable adhesive system
• 1/10 the cost of new stainless steel
• Disappears on 304 stainless steel with #4 brush
• No need to repair exis ng damage
• Covers exis ng damage and discolora ons
Uses
• Restroom par ons
• Elevators cabs and doors
• Escalator sides and surrounds
• Printable adver sing media
• Bus shelters
• Ticket vending machines
Specifica ons
Thickness .006 (6-Mil)
Liner Thickness .003 (3-Mil)
Scratch Resistant Yes
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
23. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Metal Surface Protection
Benefits
• Protects surfaces from sharp object etching
• Acid, paint, and marker resistant
• Sacrificial protec on
• Removable adhesive system
• 1/10 the cost of new stainless steel
• Disappears on bright stainless steel
• No need to repair exis ng damage
• Covers exis ng damage and discolora ons
Uses
• Restroom par ons
• Elevators cabs and doors
• Escalator sides and surrounds
• Printable adver sing media
• Bus shelters
• Ticket vending machines
Specifica ons
Thickness .006 (6-Mil)
Liner Thickness .003 (3-Mil)
Scratch Resistant Yes
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
24. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Metal Surface Protection
Benefits
• Protects surfaces from sharp object etching
• Acid, paint, and marker resistant
• Sacrificial protec on
• Removable adhesive system
• 1/10 the cost of new brushed gold panels
• No need to repair exis ng damage
• Covers exis ng damage and discolora ons
Uses
• Elevators cabs and doors
• Escalator sides and surrounds
• Printable adver sing media
• Bus shelters
Specifica ons
Thickness .0065 (6.5-Mil)
Liner Thickness .003 (3-Mil)
Scratch Resistant Yes
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662-17 Pass
VOC Emission Pass
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
6
Au
Brushed Gold
25. SECTION 09000
FINISHES AND COATINGS
09000
SECTION 09000
Finishes and Coatings
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Anti-graffiti coating for metal and flat hard surfaces.
1.2 RELATED SECTIONS
A. Section 05 5000 - Metal Fabrications
B. Section 09 7700 - Special Wall Surfaces
C. Section 09 9460 - Metallics, Patinas and Chrome Finishes
D. Section 09 9620 - Graffiti-Resistant Coatings
E. Section 09 9700 - Special Coatings
1.3 REFERENCES
A. American National Standards Institute (ANSI):
1. ANSI Z26.1 - Safety Glazing Materials
B. American Society for Testing and Materials (ASTM):
1. ASTM D 882 - Tensile Properties of Thin Plastic Sheeting.
2. ASTM D 3330 - Peel-Adhesion at 180 Degree Angle.
3. ASTM E 84-16 - Surface Burning Characteristics of Building Materials.
4. ASTM E 162-16 – Flame Spread
5. ASTM E 662-17 – Smoke Generation
6. ASTM D 532-14 – Standard Test Method For Specular Gloss
C. Consumer Product Safety Commission
1. CPSC 16 CFR 1201
1.4 PERFORMANCE REQUIREMENTS
A. Fire Performance: Surface burning characteristics when tested in accordance ASTM E 84-16:
1. Flame Spread: 25, maximum.
2. Smoke Developed: 450, maximum.
3. Must meet Class A Interior Wall and Ceiling Finish
B. Abrasion Resistance: Film must have a surface coating that is resistant to abrasion such that, a gloss
factor less than 5% at 20 degrees, 60 degrees, and 85 degrees per ANSI Z26.1 Test 17 and ASTM D
523.
ver 10.17 Page 1
26. SECTION 09000
FINISHES AND COATINGS
09000
1.5 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Selection Samples: For each film specified, submit film samples representing manufacturer's
film type for the project.
D. Verification Samples: For each film specified, two samples representing film color and pattern.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifications: All primary products specified in this section will be supplied by a
single manufacturer with a minimum of ten years’ industry experience.
B. Installer Qualifications: All products listed in this section are to be installed by a single installer with a
minimum of five years demonstrated experience in installing products of the same type and scope as
specified.
1. Provide documentation that the installer is authorized by the Manufacturer to perform Work
specified in this section.
2. Provide proof of ability to purchase material through authorized distributor or manufacture.
3. Material is to be precut and made to fit panel with no more than 1/8” tolerance and have .2
radius corners to alleviate peeling at corners.
4. Precutting must be done via CNC or similar device to ensure clean cutting is done.
5. Part number and cataloging is done and stored in a database by area, property, or location to
allow easy reordering of panels. Engraved in predetermined corner on surface of film with
minimum ½ font for viewing and cataloging.
C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application
workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship, color, and sheen are approved by
Architect.
3. Refinish mock-up area as required to produce acceptable work.
D. Material attributes.
1. Materials must be manufactured of extruded PET and/or Polyurethane.
2. Material must have a deposition of mixed metals to match Stainless Steel 304 or
Brushed Aluminum with #4-line grain finish.
3. Adhesive must be a removable system to allow adhesive to bond to material
upon removal.
4. Material thickness minimum of .006 in (6-Mil)
5. Acrylic based hard for scratch resistance and acid attack resistance.
6. Adhesive protective release liner minimum thickness of .003 in (3-Mil)
1.7 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in
accordance with requirements of local authorities having jurisdiction.
C. Please recycle materials to reduce carbon footprint.
ver 10.17 Page 2
27. SECTION 09000
FINISHES AND COATINGS
09000
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under environmental
conditions outside manufacturer's absolute limits.
1.9 WARRANTY
A. Anti-graffiti films are warranted for a period of 12 months when installed outdoors and installed indoors.
Installation must be done to manufactures guidelines. Warranty is for material failure, not against
vandalism.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Graffiti Shield, Inc.
2940 E. La Palma Ave Suite D
Anaheim, CA 92806
(714) 575-1100
sales@graffiti-shield.com
www.graffiti-shield.com
B. Acceptable Distributor/Installer:
C. Requests for substitutions will be considered in accordance with provisions of Section
1.6.
2.2 ANTI-GRAFFITI SURFACE FILM
A. Anti-Graffiti Surface Film: Metal Shield Stainless Steel 6 Mil Anti-Graffiti Film. Stainless Steel polyester
film with a durable acrylic abrasion resistant coating over one surface and a pressure sensitive
adhesive over the other.
1. Physical / Mechanical Performance Properties:
a. Film Color: Opaque and mimic Stainless Steel.
b. Thickness: Nominal 6 mils (.006 in).
c. Tensile Strength (ASTM D 882): 28,000-30,000 lbs./psi.
d. Break Strength (ASTM D 882) (Per Inch Width): 190 lbs.
e. Elongation at Break (ASTM D 882): >100 percent.
f. Peel Strength: 1,000 g/inch. (ASTM D 3330)
g. Abrasion Resistance (ASTM D 523): ANSI Z26.1 Test 17 with a gloss factor less than
5% at 20 degrees, 60 degrees, and 85 degrees
h. Chemical Resistance (ASTM D 523): ANSI Z26.1 Test 19-Pass
i. Radiant panel index of 0 (zero)
j. Surface Burn Building Materials (ASTM E 84-16)
1. Flame spread index = 15
2. Smoke develop index = 110
k. Optical Density of Smoke (ASTM E 662-17)
1. Ds = 0 @ 1.5 min
2. Ds = >1.0 @ 4 min
3. Ds Max < 63 Radiant Source
4. Ds Max < 64 Pilot Flame
2. Uniformity: No noticeable pin holes, streaks, thin spots, scratches, banding or other optical
defects.
3. Variation in Total Transmission across the Width: Less than 2 percent over the average at any
portion along the length.
4. Identification: Labeled as to Manufacturer as listed in this Section.
5. Acid Resistant Top Coat. Must have an acid resistant top coat that does not
mar during a vandal attack when acid etching agents are used. Acid agent must
ver 10.17 Page 3
28. SECTION 09000
FINISHES AND COATINGS
09000
wipe off clean and leave no residue in top coat.
B. Anti-Graffiti Surface Film: Metal Shield Brushed Aluminum 6.5-Mil Anti-Graffiti Film. Brushed Aluminum
polyester film with a durable acrylic abrasion resistant coating over one surface and a pressure
sensitive adhesive over the other.
1. Physical / Mechanical Performance Properties:
a. Film Color: Opaque and mimic Brushed Aluminum.
b. Thickness: Nominal 6 mils (.006 in).
c. Tensile Strength (ASTM D 882): 28,000-30,000 lbs./psi.
d. Break Strength (ASTM D 882) (Per Inch Width): 190 lbs.
e. Elongation at Break (ASTM D 882): >100 percent.
f. Peel Strength: 1,000 g/inch. (ASTM D 3330)
g. Abrasion Resistance (ASTM D 523): ANSI Z26.1 Test 17 with a gloss factor less than 5%
at 20 degrees, 60 degrees, and 85 degrees
h. Chemical Resistance (ASTM D 523): ANSI Z26.1 Test 19-Pass
i. Radiant panel index of 0 (zero)
j. Surface Burn Building Materials (ASTM E 84-16)
1. Flame spread index = 15
2. Smoke develop index = 110
k. Optical Density of Smoke (ASTM E 662-17)
1. Ds = 0 @ 1.5 min
2. Ds = >1.0 @ 4 min
3. Ds Max < 63 Radiant Source
4. Ds Max < 64 Pilot Flame
2. Uniformity: No noticeable pin holes, streaks, thin spots, scratches, banding or other optical
defects.
3. Variation in Total Transmission across the Width: Less than 2 percent over the average at any
portion along the length.
4. Identification: Labeled as to Manufacturer as listed in this Section.
5. Acid Resistant Top Coat. Must have an acid resistant top coat that does not
mar during a vandal attack when acid etching agents are used. Acid agent must
wipe off clean and leave no residue in top coat.
C. Anti-Graffiti Surface Film: Metal Shield Gold Brushed 6.5-Mil Anti-Graffiti Film. Gold Brushed polyester
film with a durable acrylic abrasion resistant coating over one surface and a pressure sensitive
adhesive over the other.
1. Physical / Mechanical Performance Properties:
a. Film Color: Opaque and mimic Brushed Gold.
b. Thickness: Nominal 6 mils (.006 in).
c. Tensile Strength (ASTM D 882): 28,000-30,000 lbs./psi.
d. Break Strength (ASTM D 882) (Per Inch Width): 190 lbs.
e. Elongation at Break (ASTM D 882): >100 percent.
f. Peel Strength: 1,000 g/inch. (ASTM D 3330)
g. Abrasion Resistance (ASTM D 523): ANSI Z26.1 Test 17 with a gloss factor less than 5%
at 20 degrees, 60 degrees, and 85 degrees
h. Chemical Resistance (ASTM D 523): ANSI Z26.1 Test 19-Pass
i. Radiant panel index of 0 (zero)
j. Surface Burn Building Materials (ASTM E 84-16)
1. Flame spread index = 15
2. Smoke develop index = 110
k. Optical Density of Smoke (ASTM E 662-17)
1. Ds = 0 @ 1.5 min
2. Ds = >1.0 @ 4 min
3. Ds Max < 63 Radiant Source
4. Ds Max < 64 Pilot Flame
2. Uniformity: No noticeable pin holes, streaks, thin spots, scratches, banding or other optical
defects.
3. Variation in Total Transmission across the Width: Less than 2 percent over the average at any
portion along the length.
4. Identification: Labeled as to Manufacturer as listed in this Section. ver 10.17 Page 4
29. SECTION 09000
FINISHES AND COATINGS
09000
5. Acid Resistant Top Coat. Must have an acid resistant top coat that does not
mar during a vandal attack when acid etching agents are used. Acid agent must
wipe off clean and leave no residue in top coat.
PART 3 EXECUTION
3.1 EXAMINATION
A. If preparation of surfaces is the responsibility of another installer, notify Architect in writing of deviations
from manufacturer's recommended installation tolerances and conditions.
1. Surfaces receiving new film should first be examined to verify that they are free from defects and
imperfections, which will affect the final appearance:
B. Do not proceed with installation until surfaces have been properly prepared and deviations from
manufacturer's recommended tolerances are corrected. Prepare surfaces using the methods
recommended by the manufacturer for achieving the best result under the project conditions.
C. Commencement of installation constitutes acceptance of conditions.
3.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for
the substrate under the project conditions.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions.
B. Tools needed: Spray bottle/tank, slip solution, squeegee/s, snap off blade knife, plastic hard card, lint
free towels, nonabrasive scrub pad or 220 grit sand paper.
C. Film should be cut by CNC or similar device to have no more than 1/8” tolerance on all edges.
D. Remove film and clean surface with slip solution (slip solution is composed of ¾ oz. (4 pumps) of
slip solution per quart of filtered water) and nonabrasive scrub pad or 220 grit sandpaper to remove
all debris or deep tags from surface. Clean all edges of the surface to clear them of any additional
debris.
E. Remove release liner and spray slip solution on adhesive thoroughly and mist the surface to
facilitate proper positioning of film.
D. Apply film to surface and position correctly, then lightly spray film with slip solution.
E. Squeegee the top section from middle to the left, then to the right. Next squeegee down center from
top to bottom. Then from center to the left with overlapping passes towards the bottom, then from the
center to the right with overlapping passes towards the bottom. Spray slip solution to film and repeat
squeegee pattern a second time.
G. Wrap lint free towel around plastic hard card and press any additional water out around all edges. Once
done, inspect entire surface for any left over water and remove.
H. Upon completion of film application, allow 30 days for moisture from film installation to dry thoroughly,
and to allow film to dry flat with no moisture dimples when viewed under normal viewing conditions.
3.4 CLEANING AND PROTECTION
A. Remove left over material and debris from Work area. Use necessary means to protect film
before, during, and after installation.
B. Touch-up, repair or replace damaged products before Substantial Completion.
C. After application of film, wash film using common window cleaning solutions, including ammonia
solutions, 30 days after application. Do not use abrasive type cleaning agents and bristle brushes to
avoid scratching film. Use synthetic sponges or soft cloths.
END OF SECTION ver 10.17 Page 5
30. Mirror
Shield
Surfaces protected by Mirror Shield products include:
• Fast Food Mirrors
• Gas Station Mirrors
• Movie Theatre Mirrors
• Educational Facility Mirrors
• Restaurant Mirrors
• Amusement Park Mirrors
• Mirrors
• Retail Mirrors
• Medical Facility Mirrors
Mirror Shield offers the reflective look of a mirror, while providing protection to the surface
underneath. If a mirror is vandalized, the installation of Mirror Shield can prevent the need
to replace the mirror and will further protect it from damage.
Finishing Options:
• Custom Part Numbers
for Easy Re-orders
• Radius Corners & Custom
Printed Graphic
• CNC Pre-Cuts
31. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anaheim, CA 92806
714-575-1100 www.Graffi -Shield.com
Mirror Surface Protection
Benefits
• Protects mirrors from sharp object etching
• Acid, paint, and marker resistant
• Sacrificial protec on
• Removable adhesive system
• 1/4 the cost of new mirrors
• Disappears on mirror
• No need to replace exis ng mirrors
• Covers exis ng damage and corrosion
Uses
• Restroom mirrors
• Makes any smooth surface a mirror
• Printable adver sing media
• High polished stainless steel coverage
Specifica ons
Thickness .005 (5-Mil)
Liner Thickness .003 (3-Mil)
Acid Resistant Yes
ASTM E84-16 Class A
ASTM E-162-16 Pass
ASTM E-662=17 Pass
VOC Emission Pass
ANSI Z97.1 Pass
CPSC 16 CFR1201 Cat I Pass
Scratch Resistant Yes
Industries
• Public transit
• Malls
• Hospitals
• Restaurants
• Federal buildings
• Commercial proper es (Class A & B)
• Schools
• Universi es
• Bars
• Fueling sta ons
• Movie Theaters
• Amusement parks
• Stadiums and conven on centers
Printable Material for UV Printers
32. Graffi Shield, Inc. 2940 E. La Palma Ave Suite D Anahei
714-575-1100 www.Graffi-Shield.com
kness .003 (3-Mil)
stant Yes
84-98 Class A
-162 Pass
-662 Pass
ssion Pass
97.1 Pass
1201 Cat II Pass
sistant Yes
SECTION 08800
WINDOW FILM
08800
SECTION 08800
WINDOW FILM
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Anti-graffiti window films for mirrors and glazing systems.
1.2 RELATED SECTIONS
A. Section 08300 – Mirrors; mirrors for architectural application to receive window film.
B. Section 08500 - Windows; windows to receive architectural window film.
C. Section 08600 - Skylights; glass skylights to receive architectural window film.
D. Section 08800 - Glazing; general glazing applications to receive architectural window film.
E. Section 08900 - Glazed Curtain Walls; curtain walls to receive architectural window film.
1.3 REFERENCES
A. American National Standards Institute (ANSI):
1. ANSI Z97.1 - Safety Performance Specifications and Methods of Test for Safety Glazing
Material Used in Buildings.
2. ANSI Z26.1 – Safety Glazing Materials
B. American Society for Testing and Materials (ASTM):
1. ASTM D 882 - Tensile Properties of Thin Plastic Sheeting.
2. ASTM D 3330 - Peel-Adhesion at 180 Degree Angle.
3. ASTM E 84-16 - Surface Burning Characteristics of Building Materials.
4. ASTM E 162-16 – Flame Spread
5. ASTM E 662-17 – Smoke Generation
6. ASTM D 532-14 – Standard Test Method For Specular Gloss
C. Consumer Product Safety Commission
1. CPSC 16 CFR 1201
ver 10.17 Page 1
33. SECTION 08800
WINDOW FILM
1.4 PERFORMANCE REQUIREMENTS
A. Fire Performance: Surface burning characteristics when tested in accordance ASTM E 84-16:
1. Flame Spread: 25, maximum.
2. Smoke Developed: 450, maximum.
3. Must meet Class A Interior Wall and Ceiling Finish
B. Abrasion Resistance: Film must have a surface coating that is resistant to abrasion such that, a
gloss factor less than 0.6% at 20 degrees and 60 degrees per ANSI Z26.1 Test 17 and ASTM D
523.
1.5 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
C. Selection Samples: For each film specified, submit film samples representing
manufacturer's film type for the project.
D. Verification Samples: For each film specified, two samples representing film color and pattern.
E. Performance Submittals: Provide laboratory data of emissivity and calculated window U-Factors
for various outdoor temperatures based upon established calculation procedure defined by the
ASHRAE Handbook of Fundamentals, Chapter 29, or Lawrence Berkeley Laboratory Window 5.2
Computer Program.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifications: All primary products specified in this section will be supplied by
a single manufacturer with a minimum of ten years’ industry experience.
B. Installer Qualifications: All products listed in this section are to be installed by a single installer with
a minimum of five years demonstrated experience in installing products of the same type and scope
as specified.
1. Provide documentation that the installer is authorized by the Manufacturer to perform
Work specified in this section.
2. Provide proof of ability to purchase material through authorized distributor or manufacture.
C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application
workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship, color, and sheen are approved by
Architect.
3. Refinish mock-up area as required to produce acceptable work.
1.7 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of hazardous materials, and materials contaminated by hazardous materials, in
accordance with requirements of local authorities having jurisdiction.
C. Please recycle materials to reduce carbon footprint.
ver 10.17 Page 2
34. SECTION 08800
WINDOW FILM
08800
1.8 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits
recommended by manufacturer for optimum results. Do not install products under
environmental conditions outside manufacturer's absolute limits.
1.9 WARRANTY
A. Anti-graffiti films are warranted for a period of 12 month when installed indoors.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
Graffiti Shield, Inc.
2940 E. La Palma Ave Suite D
Anaheim, CA 92806
(714) 575-1100
sales@graffiti-shield.com
www.graffiti-shield.com
B. Acceptable Distributor/Installer:
C. Requests for substitutions will be considered in accordance with provisions of Section
1.6.
2.2 ANTI-GRAFFITI WINDOW FILM
A. Anti-Graffiti Window Film: Mirror Shield 5-Mil Anti-Graffiti Film. Mirror Finished polyester film that
mimics a mirror when installed with a durable acrylic abrasion resistant coating over one surface
and a pressure sensitive adhesive over the other. The film may be laminated to other clear
polyester film layers to achieve the desired thickness of the film.
1. Physical / Mechanical Performance Properties:
a. Film Color: Reflective/Mirrored.
b. Thickness: Nominal 5.0 mils (0.005 in).
c. Tensile Strength (ASTM D 882):28,000-30,000 lbs/psi.
d. Break Strength (ASTM D 882) (Per Inch Width): 190 lbs.
e. Elongation at Break (ASTM D 882): >100 percent.
f. Peel Strength: 1,000 g/inch. ASTM D 3330)
g. Abrasion Resistance (ASTM D 523): ANSI Z26.1 Test 17 with a gloss factor less than
0.6% at 20 degrees and 60 degrees
h. Safety Glazing Materials Performance Characteristics (ANSI Z26.1)
Pass The Following Tests:
1. Light stability test 1
2. Luminous transmission test 2
3. Abrasion test 17
4. Chemical resistance test 19
5. Temperature change test 28
i. Impact (ANSI Z97.1 and CPSC CFR 1201)
1. Meet requirements of CPSC, Category I, ANSI Class B
j. Surface Burn Radiant Heat Source (ASTM E 162-16)
1. Radiant panel index of 0 (zero) ver 10.17 Page 3
35. SECTION 08800
WINDOW FILM
08800
k. Surface Burn Building Materials (ASTM E 84-16)
1. Flame spread index = 0
2. Smoke develop index = 110
l. Optical Density of Smoke (ASTM E 662-17)
1. Ds = 0 @ 1.5 min
2. Ds = 0 @ 4 min
3. Ds Max < 3 Radiant Source
4. Ds Max < 74 Pilot Flame
2. Uniformity: No noticeable pin holes, streaks, thin spots, scratches, banding or other optical
defects.
3. Variation in Total Transmission across the Width: Less than 2 percent over the average at
any portion along the length.
4. Identification: Labeled as to Manufacturer as listed in this Section.
5. Solar Performance Properties: Film applied to 1/4 Inch (6.4 mm) thick clear glass.
a. Visible Light Transmission (ÅSTM E 903): 0 percent.
b. Total Solar Reflection (ASTM E 903): 89 percent.
c. Ultraviolet Transmission (ÅSTM E 903): Less than 1 percent.
d. Total Solar Energy Rejection: 95.7 percent
6. Acid Resistant Top Coat. Must have an acid resistant top coat that does not
mar during a vandal attack when acid etching agents are used. Acid agent must
wipe off clean and leave no residue in top coat.
PART 3 EXECUTION
3.1 EXAMINATION
A. If preparation of glass surfaces is the responsibility of another installer, notify Architect in writing of
deviations from manufacturer's recommended installation tolerances and conditions.
1. Glass surfaces receiving new film should first be examined to verify that they are free from
defects and imperfections, which will affect the final appearance:
B. Do not proceed with installation until glass surfaces have been properly prepared and deviations
from manufacturer's recommended tolerances are corrected. Prepare surfaces using the methods
recommended by the manufacturer for achieving the best result under the project conditions.
C. Commencement of installation constitutes acceptance of conditions.
3.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best
result for the substrate under the project conditions.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions.
B. Tools needed: Spray bottle/tank, Film On slip solution, squeegee/s, snap off blade knife, plastic
hard card, lint free towels, SS scraper or nonabrasive scrub pad.
C. Cut film edges neatly and square at a uniform distance of 1/8 inch (3 mm) to 1/16 inch
(1.5 mm) of window sealant. Use new snap off blades as needed.
D. Remove film and clean glass surface with slip solution (slip solution is composed of ¾ oz (4
pumps) of Film On per quart of filtered water) and nonabrasive scrub pad or SS scraper to
remove all debri from surface. Clean all edges of frames to clear them of any additional debri.
ver 10.17 Page 4
36. SECTION 08800
WINDOW FILM
08800
E. Remove release liner and spray slip solution on adhesive thoroughly and mist the glass to
facilitate proper positioning of film.
D. Apply film to glass and position correctly, then lightly spray film with slip solution.
E. Squeegee the top section from middle to the left, then to the right. Next squeegee down center
from top to bottom. Then from center to the left with overlapping passes towards the bottom,
then from the center to the right with overlapping passes towards the bottom. Spray slip solution
to film and repeat squeegee pattern a second time.
G. Wrap lint free towel around plastic hard card and press any additional water out around all edges.
Once done, inspect entire surface for any left over water and remove.
H. Upon completion of film application, allow 30 days for moisture from film installation to dry
thoroughly, and to allow film to dry flat with no moisture dimples when viewed under normal
viewing conditions.
3.4 CLEANING AND PROTECTION
A. Remove left over material and debris from Work area. Use necessary means to protect film
before, during, and after installation.
B. Touch-up, repair or replace damaged products before Substantial Completion.
C. After application of film, wash film using common window cleaning solutions, including ammonia
solutions, 30 days after application. Do not use abrasive type cleaning agents and bristle brushes
to avoid scratching film. Use synthetic sponges or soft cloths.
END OF SECTION
ver 10.17 Page 5
37. Custom
Shield
Surfaces protected by Custom Shield products include:
• Train Interiors
• Bus Interiors
• Fuel Pumps
• Elevator Cabs and Doors
• Custom Substrates
• Advertising, messaging & decorative
• Metal Cladded Buildings
• Powder Coated Surfaces
• Window Frames
Graffiti Shield offers a full line of custom products and has the ability to produce unique
custom products for almost any substrate. These patent pending films are designed to
mimic a surface’s appearance while providing the benefits of a surface protection film.
Custom Shield is made in small and large batches to fit your unique needs.
Finishing Options:
• Custom Part Numbers
for Easy Re-orders
• Radius Corners & Custom
Printed Graphic
• CNC Pre-Cuts
38. Brown Metallic
03-004-01001
Arctic Gray
03-005-01002
Gun Metal Gray
03-013-01005
Custom Shield Clear
03-011-01010 and 03-011-01011
stomShieldStandardColors
(OtherColorsAvailableUponRequest)
ightGray03‐011‐01003GunmetalGray03‐013‐01005
CustomShi
(OtherColors
Ar�cGray03‐005‐01002LightGray
CustomShiel
(OtherColorsA
Ar�cGray03‐005‐01002LightGray03‐
StandardSamples