This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions, explaining that the operator must be trained and read the entire manual. It then provides sections on the machine description and controls, operating instructions, maintenance, and specifications. Safety messages in the document are identified by signal words like "DANGER", "WARNING", and "CAUTION" to indicate the risk level.
This document provides an operator's manual for a compact excavator. It begins with several warning messages emphasizing the importance of reading and understanding the instructions to avoid injury or death. The manual then provides information on machine descriptions, controls, operation, transport, maintenance, troubleshooting, specifications and options. It stresses the importance of safety and includes sections on general safety precautions, preparing safely, starting safely, operating safely, stopping safely, transporting safely and maintaining safely.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)fdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfdjjjsekkskemm
This operator's manual provides safety instructions and information for operating a compact excavator. It warns that failure to understand and follow the instructions can result in injury or death. It outlines general safety precautions including wearing protective equipment, using signals, and not removing safety guards. Starting precautions include maintaining three points of contact, clearing the area, and starting from the operator's seat. Operating safely requires being aware of the work area, performing inspections, and not putting body parts at risk of being crushed or cut.
Takeuchi tl220 track loader operator manual serial no. 222000556 and upufjsjjkksemme
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing proper protective equipment, being aware of fire hazards, maintaining safety equipment, and following all safety rules and regulations.
3) It details what to do in case of a fire, including contacting emergency services, only fighting small contained fires if trained to use an extinguisher, and evacuating if the fire spreads.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)ufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)fsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
This document provides an operator's manual for a compact excavator. It begins with warnings about reading the instructions to avoid injury or death. The summary provides:
1) The manual instructs operators on the safe operation of the excavator and contains safety messages and procedures.
2) Improper operation, inspection and maintenance of the excavator can cause injury or death, so the manual must be read and understood before use.
3) The manual contains information on operating controls, transporting, and maintaining the excavator safely.
This document provides an operator's manual for a compact excavator. It begins with several warning messages emphasizing the importance of reading and understanding the instructions to avoid injury or death. The manual then provides information on machine descriptions, controls, operation, transport, maintenance, troubleshooting, specifications and options. It stresses the importance of safety and includes sections on general safety precautions, preparing safely, starting safely, operating safely, stopping safely, transporting safely and maintaining safely.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)fdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfdjjjsekkskemm
This operator's manual provides safety instructions and information for operating a compact excavator. It warns that failure to understand and follow the instructions can result in injury or death. It outlines general safety precautions including wearing protective equipment, using signals, and not removing safety guards. Starting precautions include maintaining three points of contact, clearing the area, and starting from the operator's seat. Operating safely requires being aware of the work area, performing inspections, and not putting body parts at risk of being crushed or cut.
Takeuchi tl220 track loader operator manual serial no. 222000556 and upufjsjjkksemme
1) The document provides safety instructions and guidelines for operating heavy equipment.
2) It emphasizes the importance of wearing proper protective equipment, being aware of fire hazards, maintaining safety equipment, and following all safety rules and regulations.
3) It details what to do in case of a fire, including contacting emergency services, only fighting small contained fires if trained to use an extinguisher, and evacuating if the fire spreads.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)ufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
Takeuchi tb28 fr mini excavator operator manual (serial no. 12820004 and up)fsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with general safety warnings and alerts the operator to read and understand all instructions to prevent injury or death. It provides precautions for preparing, starting, operating, stopping, transporting and maintaining the machine safely. Safety signs and their meanings are also explained. The manual instructs the operator to perform inspections daily and repair any issues before operating. It describes proper procedures for starting the engine, mounting and dismounting the machine, and operating controls from the operator's seat.
This document provides an operator's manual for a compact excavator. It begins with warnings about reading the instructions to avoid injury or death. The summary provides:
1) The manual instructs operators on the safe operation of the excavator and contains safety messages and procedures.
2) Improper operation, inspection and maintenance of the excavator can cause injury or death, so the manual must be read and understood before use.
3) The manual contains information on operating controls, transporting, and maintaining the excavator safely.
This document provides an operator's manual for a compact excavator. It begins with several warning messages emphasizing the importance of reading and understanding the instructions to avoid injury or death. It then covers general safety precautions for operating the excavator, including wearing proper protective equipment, using signal persons, locking safety levers before exiting, and avoiding fire hazards. The document provides guidance on preparing for operation, starting the excavator safely, and operating and transporting it properly. It also includes sections on maintenance safety and identifying safety sign decals.
Takeuchi TB125 Compact Excavator Operator manual SN:12514526 and upfujfdjjsjkkmee
This is the most complete Operation and Maintenance Manual for the TAKEUCHI TB125 COMPACT EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your TAKEUCHI TB125 COMPACT EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of TAKEUCHI TB125 COMPACT EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Controls
Operation
Transport
Maintenance
Troubleshooting
Specifications
Options
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. It then describes the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment. The summary provides essential safety information for operating the compact excavator.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general machine operation, maintenance, and transportation. It then covers the controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment for the excavator. The manual stresses the importance of following all safety procedures to prevent injury when operating or working on the machine.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810675 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual outlines general safety precautions for operating temperatures, protective equipment, and avoiding fire and explosion hazards. It provides guidance for specific situations like starting, stopping, and transporting the machine.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual details specific precautions for preparing, starting, operating, stopping, transporting, and maintaining the machine safely.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upolfjsekdmmes
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and information. It warns that failure to read, understand, and follow the instructions can result in injury or death.
- Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances. The machine should only be operated within the specified temperature range.
- Safety precautions include providing fire extinguishers and first aid kits, never removing safety equipment, using proper hand signals with a flagman, and avoiding fire and explosion hazards.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upujjjjfkksekmmdm
1. The document provides safety instructions for the proper operation of a hydraulic excavator.
2. It emphasizes the importance of reading and understanding all safety messages to prevent accidents and injuries.
3. Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
This document provides an operator's manual for a compact excavator. It begins with warnings about properly understanding the instructions to avoid injury or death. It emphasizes that all operators must be fully trained on the machine's functions and controls before operation. The manual contains sections on safety precautions for preparation, starting, operation, stopping, transport and maintenance. It describes general safety signs and responsibilities of the operator.
This document provides an operator's manual for a compact excavator. It begins with several pages of safety warnings and precautions for general operation, preparing the machine, starting it, operating it, stopping it, transporting it, and performing maintenance. The warnings emphasize the risks of injury or death from being struck by moving parts, crushed, falling, fire/explosion, exhaust inhalation, and electrocution. Operators must wear proper protective equipment, know how to use safety features, avoid hazardous areas, and only start the engine from the operator's seat.
This document provides an operator's manual for a compact excavator. It begins with several pages of safety warnings and precautions for general operation, preparing the machine, starting it, operating it, stopping it, transporting it, and performing maintenance. The warnings emphasize the risks of injury or death from being struck by moving parts, crushed, falling, fire/explosion, exhaust inhalation, and electrocution. Operators must wear proper protective equipment, learn hand signals, avoid bystanders while operating, and perform daily inspections.
This document provides an operator's manual for a compact excavator. It begins with warnings about properly understanding the instructions to avoid injury or death. It emphasizes that all operators must be fully trained on the machine's functions and controls before operation. The manual contains sections on safety precautions for preparation, starting, operation, stopping, transport, and maintenance. It also notes safety sign and decal locations and provides the machine and engine serial numbers.
Massey ferguson mf3455 vsf powershuttle tractors parts catalogue manualfjjskekkdkoepll
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and heater/starter switch. The parts are organized by item number and include the part number, quantity, description, and any relevant comments. The document provides the information needed to service and repair engine parts for these tractor models.
Massey ferguson mf gc2300 compact tractor parts catalogue manualfjjskekkdkoepll
This document provides part numbers and descriptions for engine components of a Massey Ferguson GC2300 compact tractor. It includes sections on the short engine, alternator and starter, alternator page with individual part listings, starter page with individual part listings, engine electrics page, cylinder head page, cylinder head cover page, intake manifold page, exhaust manifold page, cylinder block page with many individual part listings, and an optional cylinder block page. The document contains detailed technical specifications and exploded diagrams of engine systems to aid in repair and maintenance.
More Related Content
Similar to Takeuchi tb108 compact excavator operator manual serial no. 108202134 and up
This document provides an operator's manual for a compact excavator. It begins with several warning messages emphasizing the importance of reading and understanding the instructions to avoid injury or death. It then covers general safety precautions for operating the excavator, including wearing proper protective equipment, using signal persons, locking safety levers before exiting, and avoiding fire hazards. The document provides guidance on preparing for operation, starting the excavator safely, and operating and transporting it properly. It also includes sections on maintenance safety and identifying safety sign decals.
Takeuchi TB125 Compact Excavator Operator manual SN:12514526 and upfujfdjjsjkkmee
This is the most complete Operation and Maintenance Manual for the TAKEUCHI TB125 COMPACT EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your TAKEUCHI TB125 COMPACT EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of TAKEUCHI TB125 COMPACT EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Controls
Operation
Transport
Maintenance
Troubleshooting
Specifications
Options
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upfdjjjsekkskemm
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. It then describes the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment. The summary provides essential safety information for operating the compact excavator.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general precautions, preparing the machine, starting the machine, operating safely, stopping safely, transporting safely, and maintaining safely. The document provides explanations of safety signs and symbols used and then moves into sections about the machine's controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820256 and upufsiekdolskek
This document provides an operator's manual for a compact excavator. It begins with warnings about the importance of reading and understanding the instructions to avoid injury or death. It then provides sections on safety precautions for preparing, starting, operating, stopping, transporting and maintaining the excavator. The document emphasizes following all safety rules, wearing proper protective equipment, using a fire extinguisher and first aid kit, never removing safety equipment, employing signal persons, locking the safety lock lever before leaving the seat, and avoiding fire and explosion hazards.
Takeuchi tb80 fr compact excavator operator manual serial no. 17820001 and upfsjfksemmwse
This document provides an operator's manual for a compact excavator. It begins with safety warnings and instructions regarding general machine operation, maintenance, and transportation. It then covers the controls, operation, transport, maintenance, troubleshooting, specifications, and optional equipment for the excavator. The manual stresses the importance of following all safety procedures to prevent injury when operating or working on the machine.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810675 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb53 fr compact excavator operator manual serial no. 15810005 and upfsjfksemmwse
The document provides safety instructions for operating a compact excavator. It warns that failure to understand the instructions can result in injury or death. It advises the operator to be fully trained on the machine's controls and functions before operating, and to learn controls in a safe area first before using the machine on a job site. The document outlines general safety precautions including wearing proper protective equipment, using hand signals, providing first aid kits and fire extinguishers, keeping safety guards secure, and avoiding fire and explosion hazards.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual outlines general safety precautions for operating temperatures, protective equipment, and avoiding fire and explosion hazards. It provides guidance for specific situations like starting, stopping, and transporting the machine.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upolfjsekdmmes
The document provides an operator's manual for a hydraulic excavator. It begins with several warnings about safety, including the need to read and understand all instructions to prevent injury or death. It emphasizes operating the machine only after receiving proper instruction and familiarizing yourself with its controls. The manual details specific precautions for preparing, starting, operating, stopping, transporting, and maintaining the machine safely.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upolfjsekdmmes
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and information. It warns that failure to read, understand, and follow the instructions can result in injury or death.
- Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances. The machine should only be operated within the specified temperature range.
- Safety precautions include providing fire extinguishers and first aid kits, never removing safety equipment, using proper hand signals with a flagman, and avoiding fire and explosion hazards.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upujjjjfkksekmmdm
1. The document provides safety instructions for the proper operation of a hydraulic excavator.
2. It emphasizes the importance of reading and understanding all safety messages to prevent accidents and injuries.
3. Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
This document provides an operator's manual for a compact excavator. It begins with warnings about properly understanding the instructions to avoid injury or death. It emphasizes that all operators must be fully trained on the machine's functions and controls before operation. The manual contains sections on safety precautions for preparation, starting, operation, stopping, transport and maintenance. It describes general safety signs and responsibilities of the operator.
This document provides an operator's manual for a compact excavator. It begins with several pages of safety warnings and precautions for general operation, preparing the machine, starting it, operating it, stopping it, transporting it, and performing maintenance. The warnings emphasize the risks of injury or death from being struck by moving parts, crushed, falling, fire/explosion, exhaust inhalation, and electrocution. Operators must wear proper protective equipment, know how to use safety features, avoid hazardous areas, and only start the engine from the operator's seat.
This document provides an operator's manual for a compact excavator. It begins with several pages of safety warnings and precautions for general operation, preparing the machine, starting it, operating it, stopping it, transporting it, and performing maintenance. The warnings emphasize the risks of injury or death from being struck by moving parts, crushed, falling, fire/explosion, exhaust inhalation, and electrocution. Operators must wear proper protective equipment, learn hand signals, avoid bystanders while operating, and perform daily inspections.
This document provides an operator's manual for a compact excavator. It begins with warnings about properly understanding the instructions to avoid injury or death. It emphasizes that all operators must be fully trained on the machine's functions and controls before operation. The manual contains sections on safety precautions for preparation, starting, operation, stopping, transport, and maintenance. It also notes safety sign and decal locations and provides the machine and engine serial numbers.
Similar to Takeuchi tb108 compact excavator operator manual serial no. 108202134 and up (20)
Massey ferguson mf3455 vsf powershuttle tractors parts catalogue manualfjjskekkdkoepll
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and heater/starter switch. The parts are organized by item number and include the part number, quantity, description, and any relevant comments. The document provides the information needed to service and repair engine parts for these tractor models.
Massey ferguson mf gc2300 compact tractor parts catalogue manualfjjskekkdkoepll
This document provides part numbers and descriptions for engine components of a Massey Ferguson GC2300 compact tractor. It includes sections on the short engine, alternator and starter, alternator page with individual part listings, starter page with individual part listings, engine electrics page, cylinder head page, cylinder head cover page, intake manifold page, exhaust manifold page, cylinder block page with many individual part listings, and an optional cylinder block page. The document contains detailed technical specifications and exploded diagrams of engine systems to aid in repair and maintenance.
Massey ferguson mf 3943235 sp(x) fp(x)-ap(x)-ge(x) footstep tractor parts cat...fjjskekkdkoepll
This document provides a parts list for a Massey Ferguson 394/3235 tractor engine. It includes 49 numbered items with corresponding part numbers, quantities, descriptions, and additional comments. The parts listed are for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, and various other engine components. Each item provides detailed information about a specific part to allow for accurate identification and replacement if needed.
Massey ferguson mf 3543210 sp(x) fp(x)-ge(x) footstep tractor parts catalogue...fjjskekkdkoepll
The document provides parts listings and technical specifications for components of a Massey Ferguson MF 354/3210 tractor engine. It includes over 50 items with part numbers, quantities, descriptions and other technical details for the engine block, crankshaft, pistons, cylinder head and other internal engine parts. Measurements and specifications are provided for clearances, threads, material types and other engineering details.
This document provides a parts list and diagrams for the timing gears and housing of a Massey Ferguson MF 9280 Delta Combine. It includes 56 items such as the timing gear case, idler gears, shafts, seals, bolts, and a speed sensor. The parts are grouped according to the engine serial number range to which they apply.
This document is a table of contents and parts list for a Massey Ferguson MF 7280/MF 7282 combine. It includes 23 sections that cover different systems of the combine like the engine, drive system, axles, and more. The parts lists include over 50 individual parts related to the cylinder block, timing gears and housing, and flywheel and housing components of the engine with descriptions and part numbers.
This document is a table of contents and parts list for a Massey Ferguson MF 7280/MF 7282 combine. It includes 23 sections that cover different systems of the combine like the engine, drive system, axles, and more. The parts lists include over 50 individual parts related to the cylinder block, timing gears and housing, and flywheel and housing components of the engine with descriptions and part numbers.
This document provides part numbers and descriptions for engine installation components on Massey Ferguson MF 7270 combines. It includes items such as hoses, clips, bolts, tanks, and fittings for the engine cooling, air intake, exhaust, and fuel systems. The parts are specified for two different engine and serial number ranges.
Massey ferguson mf 7265 combine (563110001 999) parts catalogue manualfjjskekkdkoepll
This document provides a parts list for the engine, fuel, and exhaust systems of a Massey Ferguson MF 7265 combine. It contains 48 pages listing over 1000 individual parts, grouped by component (e.g. engine, cooling system, fuel system). Each part is identified by part number, quantity, description, and any relevant comments or technical specifications. This level of detail suggests the document is a service or repair manual intended to support maintenance and overhaul of the key powertrain systems for this combine model.
This document provides part numbers and descriptions for engine installation components for a Massey Ferguson MF 7260 combine. It includes items for the engine installation, fan, belt tensioner, engine bracket, and specifies part number changes at various serial numbers. Over 50 individual part numbers are listed.
Massey ferguson mf 3640 combine (br) parts catalogue manualfjjskekkdkoepll
This document provides parts information for an MF 3640 combine engine. It includes a list of 70 items with part numbers, quantities, descriptions, and other details. The engine is a 1006-6 producing 125 horsepower. Items listed include brackets, bolts, pins, gaskets, pipes, adapters, springs, and other engine parts. Serial numbers are provided to indicate when part numbers changed.
Massey ferguson mf 3640 combine (br for iraq) parts catalogue manualfjjskekkdkoepll
1) The document provides a parts list and descriptions for an MF 3640 combine engine assembly from serial number 4S000270. It includes over 70 individual parts ranging from bolts and pins to larger components like the cylinder block and crankshaft.
2) Each part is listed by item number, part number, quantity, description, and any relevant comments. Additional part numbers are sometimes included to indicate variations in specifications.
3) The parts are grouped into related assembly sections covering the engine, cylinder head, valves, timing components, and other internal engine parts. Precise part numbers, quantities, and exploded diagram references are given to fully specify the engine configuration.
Massey ferguson mf 3445 vsf powershuttle tractors parts catalogue manualfjjskekkdkoepll
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and heater/starter switch. The parts are organized by item number and include the part number, quantity, description, and any relevant comments. The document provides the information needed to service and repair engine parts for these tractor models.
Massey ferguson mf 3435 vsf powershuttle tractors parts catalogue manualfjjskekkdkoepll
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and heater/starter switch. The parts are organized by item number and include the part number, quantity, description, and any relevant comments. The document provides the information needed to service and repair engine parts for these tractor models.
Massey ferguson mf 3425 vsf powershuttle tractors parts catalogue manualfjjskekkdkoepll
This document contains parts lists and diagrams for engine components of Massey Ferguson 3425, 3435, 3445, and 3455 tractors, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and heater/starter switch. The parts are organized by item number and include the part number, quantity, description, and any relevant comments. The document provides the information needed to service and repair engine parts for these tractor models.
Massey ferguson mf 2615 ge tractor made in india for turkey parts catalogue...fjjskekkdkoepll
This document provides a table of contents and specifications for engine parts of a Massey Ferguson MF 2615 GE tractor made in India for Turkey. It includes over 30 pages listing over 100 individual engine part numbers, descriptions, quantities and other technical details. The document covers parts for the engine, fuel system, cooling system, air filter and exhaust. It provides an exploded diagram view and specifications for key engine components like the cylinder block, crankshaft, pistons, cylinder head and valves.
Massey ferguson mf 2205 compact tractor parts catalogue manualfjjskekkdkoepll
This document provides parts information for the engine of a Massey Ferguson 2205 compact tractor. It includes 4 pages detailing various engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part is listed with its number, quantity, description, and any relevant comments. The document aims to provide technicians and operators with an exploded diagram and parts listing for the engine to assist with repairs and ordering replacements.
Massey ferguson mf 2085 combine parts catalogue manualfjjskekkdkoepll
The document provides parts lists and diagrams for the Massey Ferguson MF 2035/2045/2065/2085 combine. It includes lists of parts with part numbers and quantities for various components of the combine including long and short dividers, side tubes, bow dividers, and the cutting table. Diagrams show the layout and connections of parts for these combine components.
Massey ferguson mf 2065 combine parts catalogue manualfjjskekkdkoepll
The document provides parts lists and diagrams for the Massey Ferguson MF 2035/2045/2065/2085 combine. It includes lists of parts with part numbers and quantities for various components of the combine including long and short dividers, side tubes, bow dividers, and the cutting table. Diagrams show the layout and connections of parts for these combine components.
Massey ferguson mf 2045 combine parts catalogue manualfjjskekkdkoepll
The document provides parts lists and diagrams for the Massey Ferguson MF 2035/2045/2065/2085 combine. It includes lists of parts with part numbers and quantities for various components of the combine including long and short dividers, side tubes, bow dividers, and the cutting table. Diagrams show the layout and connections of parts for these combine components.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Globalfleet - global fleet survey 2021 full results
Takeuchi tb108 compact excavator operator manual serial no. 108202134 and up
1. Compact Excavator
Book No. AB5E006
Serial No. 10811300~
TB108
OPERATOR’S MANUAL
Read and understand these instructions.
Failure to do so can cause injury or death.
WARNING
2. SAFETY ALERT SYMBOL
This symbol means Attention! Be Alert! Your Safety Is Involved.
The message that follows the symbol contains important information
about safety.
Read and understand the message to avoid personal injury or death.
■ It is the owner or employer’s responsibility to fully instruct each operator in the
proper and safe operation of all equipment. All persons using this machine should
thoroughly familiarize themselves with the following sections.
■ All operators must be instructed on the proper functions of the excavator before
running the machine.
■ Learn and practice correct use of the machine controls in a safe, clear area before
operating this machine on a job site.
CAUTION
Improper operation, inspection and maintenance of this
machine can cause injury or death.
Read and understand this manual before performing any
operation, inspection or maintenance on this machine.
■ Always store this manual near at hand preferably on the machine itself. If it should be lost
or damaged, immediately order a new one from your Takeuchi dealer.
When transferring ownership of this machine, be sure to provide this manual to the next
owner.
■ Takeuchi supplies machines complying to the local regulations and standards of the country
of export. If your machine has been purchased in another country or from a person or
company of another country, it may not have the safety devices or safety standards required
for use in your country. Should you have any question about whether your machine complies
with the regulations and standards of your country, contact a Takeuchi dealer.
■ Please note that the contents and diagrams included in this manual may not match your
machine exactly.
3. 1
It is your responsibility to observe all pertinent laws and regulations and to follow the
manufacturer’s instructions on machine operation, inspection and maintenance.
Virtually all accidents occur as the result of a failure to observe basic safety rules and
precautions.An accident can often be avoided by recognizing potentially hazardous situations
beforehand. Read and understand all of the safety messages which explain how to prevent
these accidents from occurring. Do not operate the machine until you are sure that you have
gained a proper understanding of its operation, inspection and maintenance.
■ SlGNAL WORDS
Safety messages appearing in this manual and on machine decals are identified by the
words “DANGER”, “WARNING” and “CAUTION”. These signal words mean the following:
The word “DANGER”
indicates an imminently
hazardous situation
which, if not avoided,
can result in serious
injury or death.
The word “WARNING”
indicates a potentially
hazardous situation
which, if not avoided,
could result in serious
injury or death.
The word “CAUTlON”
indicates a potentially
hazardous situation
which, if not avoided,
may result in minor or
moderate injury.
DANGER WARNING CAUTION
IMPORTANT: The word “IMPORTANT” is used to alert against operators and
maintenance personnel about situations which can result in possible damage to the
machine and its components.
It is impossible to foresee every possible circumstance that might involve a potential hazard.
The warnings in this manual or on the machine can not cover all possible contingencies. You
must exercise all due care and follow normal safety procedures when operating the machine
so as to ensure that no damage occurs to the machine, its operators or other persons.
■ EXPLANATION OF GRAPHICAL SYMBOLS
Following is an explanation of symbols used in this manual.
/ X......... prohibition
........... Lock
......... Unlock
4. 2
INTRODUCTION
■ Serial numbers
Check the serial numbers of the machine and
the engine and write them in the spaces
provided below.
Machine number :
Engine number :
Foreword
This manual describes operation, inspection
and maintenance of the machine, as well as
safety instructions to be heeded during these
operations.
If you have any questions about the machine,
please contact a Takeuchi sales or service
outlet.
■ Manual storage
A compartment for storing this manual is
provided at the position shown on the
diagram below.
After using the manual, place it in the plastic
pouch and store it back in the manual storage
compartment.
B5A001
B5A002
5. 3
■ Front, rear, Ieft and right
This manual refers the front, rear, left and
right of the machine as seen when sitting in
the operator’s seat with the dozer blade
visible to the front.
■ Designated operations
Use this machine primarily for the following
operations:
¡Excavating
¡Digging ditches
¡Digging side ditches
¡Leveling
¡Loading
MACHINE DESCRIPTlON
■ Features
¡Short pitch rubber crawler
¡Low engine noise and exhaust emissions
¡Fast working speed and low-shock working equipment
¡Excellent stability thanks to a low center of gravity
■ Break-in period
When is new, heed the instructions below when operating the machine for the first 100 hours
(as indicated on the hour meter).
Using a new machine roughly without breaking it in will lead to quicker deterioration of machine
performance and may shorten the machine’s service life.
¡Warm up the engine and hydraulic oil sufficiently.
¡Avoid heavy loads and rapid operations. Operate with a load of about 80% the maximum
load.
¡Do not start up, accelerate, change directions, or stop abruptly unless necessary.
8. 8
SAFETY
General Precautions
Observe all safety rules
¡Operation, inspection and maintenance of
this machine must be performed only by
a trained and qualified person.
¡All rules, regulations, precautions and
safety procedures must be understood
and followed when performing operation,
inspection and maintenance of this
machine.
¡Do not perform any operation, inspection
and maintenance of this machine when
under the adverse influence of alcohol,
drugs, medication, fatigue, or insufficient
sleep.
Wear appropriate clothing and
personal protective equipment
¡Do not wear loose clothing or any
accessory that can catch on controls or in
moving parts.
¡Do not wear oily or fuel stained clothing
that can catch fire.
¡Wear a hard hat, safety shoes, safety
glasses, filter mask, heavy gloves, ear
protection and other protective equipment
as required by job conditions. Wear
required appropriate equipment such as
safety glasses and filter mask when using
grinders, hammers or compressed air, as
metal fragments or other objects can fly
and cause serious injury.
¡Use hearing protection when operating the
machine. Loud prolonged noise can cause
hearing impairments, even the total loss
of hearing.
9. 9
SAFETY
General Precautions
Use a signal person and flagman
Know and use the hand signals required for
particular jobs and make sure who has the
responsibility for signaling.
¡All personnel must fully understand all the
signals.
¡The operator shall respond to signals only
from the appointed signal person, but shall
obey a stop signal at any time from
anyone.
¡The signal person must stand in a clearly
visible location when giving signals.
Provide a fire extinguisher and
first aid kit
¡Know where a fire extinguisher and first
aid kit are located and understand how to
use them.
¡Know how to contact emergency
assistance and first aid help.
Never remove safety equipment
¡Make sure all protective guards, canopies,
doors, etc., are in place and secure. Repair
or replace damaged components before
operating the machine.
¡Know how to use the safety lock lever, seat
belt and other safety equipment and use
them properly.
¡Never remove any safety equipment
except for service. Keep all safety
equipment in good operating condition.
10. 10
SAFETY
Be sure to lock the safety lock
lever before leaving the
operator’s seat
¡Before leaving the operator’s seat, raise
the safety lock lever to engage the lock
and stop the engine. If any controls should
be touched accidentally when the safety
lock lever is lowered, the machine will
move suddenly, and cause serious injury
or death.
¡Note that the dozer blade, boom swing
and auxiliary hydraulics controls are not
locked, even when the safety lock lever is
set to the lock position. Do not touch these
controls accidentally.
¡Before leaving the operator’s seat, lower
the working equipment, raise the safety
lock lever, and stop the engine. Also, be
sure to remove the key and take it with
you.
General Precautions
Avoid fire and explosion hazards
Keep flames away from fuel, hydraulic fluid,
oil, grease and antifreeze. Fuel is particularly
flammable and dangerous.
¡When handling these combustible
materials, keep lit cigarettes, matches,
lighters and other flames or sources of
flames away.
¡Do not smoke or permit open flames while
fueling or near fueling operations.
¡Never remove the fuel cap or refuel with
the engine running or hot. Never allow fuel
to spill on hot machine components.
¡Clean up spilled fuel, oil or other
flammable fluids immediately.
¡Check for fuel, oil or hydraulic fluid leaks.
Stop all leaks and clean the machine
before operating.
¡Do not cut or weld on pipes or tubes that
contain flammable fluids. Clean thoroughly
with nonflammable solvent before cutting
or welding.
¡Remove all trash or debris from the
machine. Make sure that oily rags or other
flammable material are not stored on the
machine.
¡Handle all solvents and dry chemicals
according to procedures identified on
manufacturers’containers. Work in a well-
ventilated area.
¡Never use fuel for cleaning purposes.
Always use a nonflammable solvent.
¡Store all flammable fluids and materials
in a safe and well-ventilated place.
11. 11
SAFETY
Exhaust fumes from the engine
can kill
¡Do not operate the engine in an enclosed
area without adequate ventilation.
¡If natural ventilation is poor, install
ventilators, fans, exhaust extension pipes
or other artificial venting devices.
Handling asbestos dust
Inhaling asbestos dust has been linked to
lung cancer. When handling materials which
may contain asbestos, take the following
precautions:
¡Never use compressed air for cleaning.
¡Avoid brushing or grinding of the materials.
¡For clean up, use wet methods or a
vacuum equipped with a high efficiency
particulate air (HEPA) filter.
¡Wear an approved respirator if there is no
other way to control the dust. When
working indoors, install a ventilation
system with a macro molecular filter.
Be careful not to get crushed or
cut
Never put your hands, feet or other parts of
your body between the upperstructure and
the undercarriage or tracks, between the
machine body and working equipment, or
between a cylinder and moving part.The size
of these gaps change when the machine
moves and if caught a person can suffer
severe injury or death.
Using optional products
¡Consult with a Takeuchi dealer before
installing optional attachments.
¡Do not use attachments that have not
been approved by Takeuchi or a Takeuchi
dealer. Doing so may compromise safety
or adversely affect the machine’s
operation or service life.
¡Takeuchi will not be held responsible for
any injuries, accidents or damage to its
products caused by the use of a non-
approved attachment.
Never modify the machine
Unauthorized modifications to this machine
can cause injury or death. Never make
unauthorized modifications to any part of this
machine.
General Precautions
12. 12
SAFETY
Preparing Precautions
Know the working area
Before starting operation, know the working
area to ensure safety.
¡Check the topography and ground
condition of the working area, or the
structure of the building when working
indoors, and take the necessary safety
measures in dangerous spots.
¡Note and avoid all hazards and
obstructions such as ditches, underground
lines, trees, cliffs, overhead electrical wires
or areas where there is danger of a slide.
¡Check with the local utilities for the
locations of buried gas and water pipes
and buried power cables. Determine jointly
what specific precautions must be taken
to insure safety.
¡When working on roads, be sure to take
into account the safety of pedestrians and
vehicles.
• Use a flagman and/or signals.
• Fence off the working area and prohibit
entry to unauthorized persons.
¡When working in water or crossing shallow
streams or creeks, check the depth of the
water, the solidity of the ground, and the
speed of the current beforehand. Make
sure the water is not deeper than the
allowable depth.
Refer to the section titled “Cautions on
Operating” for further instructions.
Alway keep the machine clean
¡Clean windows, mirrors and lights to
ensure good visibility.
¡Wipe off any oil, grease, mud, snow or
ice, to prevent accidents due to slipping.
¡Remove all loose objects stored in the
machine and all objects which do not
belong in or on the machine and its
equipment.
¡Remove any dirt, oil or grease from the
engine area, to prevent fires.
¡Clean the area around the operator’s seat,
removing any potential obstacles.
13. 13
SAFETY
Preparing Precautions
Perform inspection and
maintenance daily
Failure to notice or repair machine
irregularities or damage can lead to
accidents.
¡Before operating, perform the prescribed
inspections and make repairs immediately
should any irregularities be found.
¡If a failure that causes loss of control such
as steering, service brakes or engine
occurs, stop the machine motion as
quickly as possible, follow the shutdown
procedure, and keep machine securely
parked until the malfunction is corrected.
14. 14
SAFETY
Starting Precautions
Maintain three point contact
when mounting and dismounting
¡Do not jump on or off the machine. Never
attempt to mount or dismount a moving
machine.
¡When mounting and dismounting the cab,
first open the door fully to the locked
position and check that it does not move.
(For machines with cabs)
¡Always face the access system and
maintain a three point contact with the
recommended handrails and steps while
getting on and off the machine. Keep steps
and platform clean.
¡Never use the safety lock lever or control
levers as hand holds.
Clear the area of other persons
before starting the machine
Do not start the engine until you are sure it is
safe. Before starting, check or perform the
following.
¡Walk around the machine and warn all
personnel who may be servicing the
machine or are in the machine path. Do
not start until all personnel are clearly away
from the machine.
¡Check for any “DO NOT OPERATE” tags
or similar warning notices on the cab door,
controls or starter switch.
¡Sound horn to alert everyone around the
machine.
Start the engine from the
operator’s seat
¡Adjust, secure and latch the operator’s
seat.
¡Fasten the seat belt.
¡Check that the parking device is applied
and place all controls in the neutral
position.
¡Check that the safety lock lever is in the
lock position.
¡Clear the area of all persons.
¡Start and operate the engine from the
operator’s seat only.
¡Never attempt to start the engine by
shorting across the starter terminals.
15. 15
SAFETY
Starting Precautions
Starting with jumper cables
Use jumper cables only in the recommended
manner. Improper use of jumper cables can
result in battery explosion or unexpected
machine motion.
Refer to the section titled “If the Battery
Goes Dead” for proper instructions.
After starting the engine
After starting the engine, perform the
following operations and checks in a safe
place with no persons or obstacles in the
area. If any malfunctions are found, follow
the shutdown procedure and report the
malfunction.
¡Warm up the engine and hydraulic fluid.
¡Observe all gauges or warning
instruments for proper operation.
¡Listen for unusual noises.
¡Test engine speed control.
¡Operate each control to insure proper
operation.
In cold weather
¡Be careful of slippery conditions on
freezing ground, steps and hand holds.
¡In severe cold weather, do not touch any
metal parts of the machine with exposed
flesh, as flesh can freeze to the metal and
Cause injury.
¡Do not use ether or starting fluids on this
engine. These starting aids can cause
explosion and serious injury or death.
¡Warm up the engine and hydraulic fluid
before operating.
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. 16
SAFETY
Operating Precautions
Ensure good visibility
¡When working in dark places, turn on the
machine’s working lights and headlights
and/or provide extra stationary lighting if
necessary.
¡When visibility is poor due to severe
weather (fog, snow or rain), stop operating
the machine and wait until conditions
improves.
Do not permit riders on the
machine
¡Do not allow anyone to ride on any part of
the machine at any time while traveling.
¡Do not allow anyone to be on any part of
the machine while operating.
Check for safety in the
surrounding area before starting
¡Understand the machine limitations.
¡Use a signal person where clearances are
close or your vision is obstructed.
¡Never allow anyone to enter the slewing
(swing) radius and machine path.
¡Signal your intention to move by sounding
the horn.
¡There are blind spots to the rear of the
machine.
If necessary, swing the cab around before
backing up to check that the area is safe
and clear.
18. 17
SAFETY
Operating Precautions
Travel safety
¡Travel with the dozer blade up, the hoe
attachment folded as shown on the
diagram, and the bucket raised 30 to 40
cm (12 to 16 in.) from the ground.
¡Do not slew (swing) while traveling. If you
must operate the hoe attachment while
traveling, operate at speeds slow enough
so you have complete control at all times.
¡Avoid crossing over obstacles whenever
possible. If you must do so, keep the hoe
attachment close to the ground and travel
slowly. Never cross obstacles if they will
seriously tilt the machine (to an angle of
10° or greater).
¡On uneven ground, travel at low speed
and avoid accelerating, stopping or
changing directions abruptly.
¡When roading a machine, know and use
the signaling devices required on the
machine. Provide an escort for road travel
when required.
Check the position of the under-
carriage (tracks) before traveling
Before operating the travel levers, check to
make sure that the dozer blade is to the front
oft he operator’s seat. BEAWARE that when
the dozer blade is to the rear of the operator’s
seat, the travel levers operate in the opposite
direction to when the dozer blade is in the
front.
Fully extend the crawler width
when operating
Always operate the machine with the crawler
width at the maximum to increase machine
stability. The smaller the crawler width, the
greater the possibility the machine can tip
over. If it is absolutely necessary to operate
the machine with a narrow crawler width, do
so with great care.
Dozer blade
(12 to 16 in.)
E4A040
19. 18
SAFETY
Operating Precautions
Cautions on traveling on slopes
When traveling on slopes or grades, be
careful that the machine does not tip (roll)
over or slide.
¡Never exceed the machine’s stability
capabilities (maximum gradeability - 25°,
lateral tipping angle - 10°). Also note that
when actual working area conditions are
poor the machine’s stability capabilities
may be lower.
¡When traveling on slopes or grades, lower
the bucket to a height of 20 to 30 cm (8 to
12 in.) off the ground. In emergencies,
lower the bucket to the ground and stop
the machine.
¡When traveling on slopes or grades, move
slowly in first gear (low speed).
¡Do not travel down slopes in reverse.
¡On grass, dead leaves, wet metal or
frozen surfaces, the machine may slide
sideways even on very gentle slopes.
Make sure the machine never faces
sideways with respect to the slope.
¡Do not change directions or cross slopes
sideways. First return to a flat surface then
redirect the machine.
Operate on snow or ice with extra
care
¡When traveling on snow or frozen
surfaces, keep the machine travel speed
down and avoid accelerating, stopping or
changing directions abruptly.
¡Remember that the road shoulder, fences,
etc., may be buried in the snow and not
visible.
¡Lower the dozer blade when parked on
unsure ground conditions.
Descending
Dozer blade
(8 to 12 in.)
Climbing
(8 to 12 in.)