The document provides instructions for attaching new informational tags to garments starting in Spring 2010. The tags are divided into two parts that are separated by a knurling. The large part is attached to the swing ticket, while the small part remains attached to the envelope. The instructions explain that tags should be removed by starting at the yellow part and separating at the knurling. When attaching the tag to the swing ticket, the sticker is placed so that the small second part remains hanging from the yellow side.

1. INFORMATIVE DOCUMENT - TAG
SABATINI spa
IT department
Help desk
Itdepartment@sabatini.it
+ 39 0587 606 437

2. INFORMATIVE DOCUMENT - TAG
Starting from SPRING 2010 we’ll
introduce new tags stickers
that identify the garment
(see image at page 1).
Beyond modifications about
information and razionalitazion,
the new tag also change in
dimension and type
of the support.
These variation need a
precise procedure
to attach the sticker to the swing ticket,
that we are going to explain
in this document.

3. INFORMATIVE DOCUMENT - TAG
TAG LAYOUT
the tag is divided (by a knurling) in two parts
th big part
has to be attach to swing ticket
the small part
will be attached (at the end of cycle)
on the envelope

4. INFORMATIVE DOCUMENT - TAG
FRONT
BACK
the red arrow stands for the knurling
(both on the white label and also on the yellow)

5. INFORMATIVE DOCUMENT - TAG
1
REMOVING
to correctly remove the tag,
start removing the sticker
from the yellow part
until the knurling (see pictures).
2
3

6. INFORMATIVE DOCUMENT - TAG
REMOVING
the final result has to be:

7. INFORMATIVE DOCUMENT - TAG
ATTACHMENT OF THE STICKER ON THE SWING
TICKET
the sticker has to be placed in a way
to afford that the second part of the tag
(the small one)
stays hanged-on with the yellow side
still attached.