This document provides instructions for building a model train track using PVC pipes and connectors. It lists the materials needed, which include different lengths of PVC pipes and elbow and T-shaped connectors. It then gives directions to cut the pipes to size, connect a 15-inch pipe to elbow connectors on both ends, add 8-inch pipes to those, and finish by attaching T-connectors and the remaining 8-inch pipes to complete the track.

2. Things you will need for this project:
1. One piece of 15 inch pipe
2. Six pieces of 8 inch pipe
3. Two elbow pvc connectors and two T pvc connectors
4. Measuring tape
5. Saw or PVC cutter
6. Marker

3. Buy a 10 foot piece of PVC
pipe and mark off one 15
inch piece and six 8 inch
pieces.

4. Cut the marked
sections.

5. Add the two elbow
connectors to the ends of
your 15 inch piece of PVC

7. Add one 8 inch
piece into each of
the open ends of
the elbow
connectors

9. Add the two
t-connectors
to the ends
of the 8 inch
sections

11. Add your last
four pieces of 8
inch PVC to the t-connectors

13. Train!