Steps to Replace a
Windshield
Introduction
 Windshields are a very important part of
the car.
 They provide an unobstructed and clear
view of the road ahead.
 Some cracks in the windshield cannot be
repaired and therefore, the windshield must
be replaced.
 The following slides talk about the steps to
replace a windshield.
Removing The Old Windshield
 Remove plastic mouldings, if there are any,
from around the windshield.
 Cut the adhesive to remove the mould.
 Gently push the damaged windshield from
inside the car.
 Remove the adhesive, and clean the frame with
plain water & a brush.
Choosing Appropriate Windshield
 Measure the windshield’s size to ensure a
proper fit for your car.
 Choose the windshield wisely as it protects
the passengers during an accident.
Apply Bead of Urethane
 As windshield forms an integral part of
the structure, always use good quality
adhesive.
 Before applying adhesive make sure that
there are no dust particles trapped in the
frame.
 Carefully lay the bead of urethane. Avoid
stops and move your hand at a constant
speed.
Install the Windshield
 Be extra careful while placing the windshield
on the frame.
 Make sure that the windshield is aligned in
accordance with the adhesive that has been
applied.
 Allow the urethane to dry and set.
Connect With Us
Website: http://www.windshieldexperts.com/
Facebook: https://www.facebook.com/pages/Windshield-Experts/
Twitter: https://twitter.com/WindshieldExprt
LinkedIn: https://www.linkedin.com/company/shield-autoglass-limited?
Google+:https://plus.google.com/b/113161039486053469318/11316103948605346931
8/posts
Pinterest: https://www.pinterest.com/windshieldexpts/
Call Us: 1800-102-6364

Steps to replace windshield

  • 1.
    Steps to Replacea Windshield
  • 2.
    Introduction  Windshields area very important part of the car.  They provide an unobstructed and clear view of the road ahead.  Some cracks in the windshield cannot be repaired and therefore, the windshield must be replaced.  The following slides talk about the steps to replace a windshield.
  • 3.
    Removing The OldWindshield  Remove plastic mouldings, if there are any, from around the windshield.  Cut the adhesive to remove the mould.  Gently push the damaged windshield from inside the car.  Remove the adhesive, and clean the frame with plain water & a brush.
  • 4.
    Choosing Appropriate Windshield Measure the windshield’s size to ensure a proper fit for your car.  Choose the windshield wisely as it protects the passengers during an accident.
  • 5.
    Apply Bead ofUrethane  As windshield forms an integral part of the structure, always use good quality adhesive.  Before applying adhesive make sure that there are no dust particles trapped in the frame.  Carefully lay the bead of urethane. Avoid stops and move your hand at a constant speed.
  • 6.
    Install the Windshield Be extra careful while placing the windshield on the frame.  Make sure that the windshield is aligned in accordance with the adhesive that has been applied.  Allow the urethane to dry and set.
  • 7.
    Connect With Us Website:http://www.windshieldexperts.com/ Facebook: https://www.facebook.com/pages/Windshield-Experts/ Twitter: https://twitter.com/WindshieldExprt LinkedIn: https://www.linkedin.com/company/shield-autoglass-limited? Google+:https://plus.google.com/b/113161039486053469318/11316103948605346931 8/posts Pinterest: https://www.pinterest.com/windshieldexpts/ Call Us: 1800-102-6364