Editor: Eng. Mohamadreza Govahi
Mentor: Dr. Ehsan Borhani
Date of Presentation: Apr 2016, Semnan PN Univeristy
*Contents
~Introduction to MMCs
~Introduction to Aluminum MMCs (AMMCs)
~Ceramic Reinforcements in AMMCs
~Types and Morphology of Reinforcements
~Aluminum Nano-composites
~Producing Methods
~Comparison in Different Procedures
~Reviews of some Experiments And Researches
nFluids Nanoparticle Technology Additives for Drilling Fluids & Oil & Gas Ap...Dr. Jeff Forsyth
nFluids Inc. is an innovative Nanotechnology company that designs and manufactures nanoparticle additives for a variety of industrial challenges. The company was founded on cutting edge research and its technology is currently in the process of being fully commercialized.
nFluids design and manufacture nanoparticles using a bottom up approach which gives us fine control over the size, shape and functionality of the end product, offering a bespoke service to give our clients the products they need. nFluids technology is a true platform technology in that there are multiple applications, including Medical, Pharmaceutical, Construction and Oil & Gas eg.,
- Drilling
- Fracturing
- Lubrication
- Cementing
- Corrosion control
- Enhanced Oil Recovery
- Conformance control
- Oil & Water separation
- Marine & Land spillage
nFluids first commercial product (nForcer) is a nanoparticle drilling fluid additive which is compatible with all drilling fluid types, bringing the end user multiple benefits in one product with the potential to replace other products or form the backbone of the next generation in drilling fluids. In this respect nForcer is truly a disruptive technology. Key benefits are as follows
(1) Up to 70% reduction in drilling fluid loss during drilling: reducing the cost to the O&G operator
(2) Up to 60% increase in Well bore strengthening: weak wellbores lengthen the drilling process and add additional rig time cost, but the implications for re-fracturing, well integrity and well design are enormous.
(3) Up to 50% increase in Lubricity: allowing the operator to drill faster, reduce rig time cost whilst opening up other lubricity applications
(4) 15-20 % Less Oil on cuttings: reducing the environmental impact, oil can be recycled lowering the disposal costs
nFluids has successfully conducted 9 field pilots in Alberta and has signed a JDA with a global drilling fluid company.
Editor: Eng. Mohamadreza Govahi
Mentor: Dr. Ehsan Borhani
Date of Presentation: Apr 2016, Semnan PN Univeristy
*Contents
~Introduction to MMCs
~Introduction to Aluminum MMCs (AMMCs)
~Ceramic Reinforcements in AMMCs
~Types and Morphology of Reinforcements
~Aluminum Nano-composites
~Producing Methods
~Comparison in Different Procedures
~Reviews of some Experiments And Researches
nFluids Nanoparticle Technology Additives for Drilling Fluids & Oil & Gas Ap...Dr. Jeff Forsyth
nFluids Inc. is an innovative Nanotechnology company that designs and manufactures nanoparticle additives for a variety of industrial challenges. The company was founded on cutting edge research and its technology is currently in the process of being fully commercialized.
nFluids design and manufacture nanoparticles using a bottom up approach which gives us fine control over the size, shape and functionality of the end product, offering a bespoke service to give our clients the products they need. nFluids technology is a true platform technology in that there are multiple applications, including Medical, Pharmaceutical, Construction and Oil & Gas eg.,
- Drilling
- Fracturing
- Lubrication
- Cementing
- Corrosion control
- Enhanced Oil Recovery
- Conformance control
- Oil & Water separation
- Marine & Land spillage
nFluids first commercial product (nForcer) is a nanoparticle drilling fluid additive which is compatible with all drilling fluid types, bringing the end user multiple benefits in one product with the potential to replace other products or form the backbone of the next generation in drilling fluids. In this respect nForcer is truly a disruptive technology. Key benefits are as follows
(1) Up to 70% reduction in drilling fluid loss during drilling: reducing the cost to the O&G operator
(2) Up to 60% increase in Well bore strengthening: weak wellbores lengthen the drilling process and add additional rig time cost, but the implications for re-fracturing, well integrity and well design are enormous.
(3) Up to 50% increase in Lubricity: allowing the operator to drill faster, reduce rig time cost whilst opening up other lubricity applications
(4) 15-20 % Less Oil on cuttings: reducing the environmental impact, oil can be recycled lowering the disposal costs
nFluids has successfully conducted 9 field pilots in Alberta and has signed a JDA with a global drilling fluid company.
پجشنبه گذشته، بیست و ششم آذر ماه نودوچهار، هشتاد و پنجمین نشست گپ گرافیک، با سخنرانی حسین شیخ زادگان و حامد بهتاش در مبحث چاپ با موضوع یک قدم تا چاپ کار خود را آغاز کرد. در زیر بخشی از ارائهی وی آمده است:
باتوجه به اینکه امروزه هنرگرافیک به عنوان عامل موثر در گسترش صنعت محسوب میشود و بخشی از آن میباشد، گاها به عنوان فن گرافیک نیز تعریف میشود. بیشتر کارهای گرافیکی جهت کاربردی شدن و قابل استفاده قرارگرفتن، نیاز به گسترهای به نام چاپ دارد، که بدون اطلاع از این صنعت شاهد کاستیهایی در ارائه آثار گرافیکی خواهیم بود. ابتدا اطلاعات بنیادی چاپ مورد توجه قرار میگیرد.
-تفاوت رنگهای RGB و CMYK که رنگ CMYK اساس صنعت چاپ میباشد.
آشنایی با مفهوم ترام به عنوان کوچکترین جز صنعت چاپ
آشنایی با زوایا و خطاهای مربوط به آن مثلا مسئله پیچازی و اندازه و انواع شکل ترام و ترامهای مورد استفاده در چاپهای مختلف و خطاهای مربوط به ترام مثلا چاقی یا لاغری و رفع مشکلات آن
آشنایی با کلیات رجیستر و اهمیت و شناخت کلی آن و بحث کالربار
بعداز آشنایی با مفاهیم کلی چاپ، اکنون با خطاهای رایج در چاپ افست آشنا میشویم:
خطاهای مربوط به کالیبراسیون دستگاه ( میزان رنگ دهی در چاپ) که جهت اصلاح این خطا، استفاده از ترکیبهای مطمئن است.
خطای رجیستر یا روی همخوری چاپ که برای اصلاح این خطا ابتدا با مفهوم Overprint یا Multiplay آشنا شدیم و طریقه اجرای آن با روشهای مختلف مورد بررسی قرار دادیم.
سپس به بحث در مورد رنگهای پنتون، مخصوصا رنگهایی که جلای فلزی دارند بر روی کاغد و میزان پوششدهی آنها پرداخته شد.
در آخر جلسه، طریقه چیدمان فایلهای چاپی بر روی زینک یا پلیت مورد بررسی قرار گرفت.
سپس به پرسش و پاسخ های همکاران و دوستان عزیز پرداخته و جمعبندی نهایی انجام شد.
The way in which material is transferred from the tip of the consumable electrode into the weld pool has a significant influence on the overall performance of GMAW.
it affects process stability, spatter generation, weld quality and the positional capabilities of the process.
Phenomenological studies of the mode of metal transfer have been carried out using high-speed cine or stroboscopic cine and video techniques.
پجشنبه گذشته، بیست و ششم آذر ماه نودوچهار، هشتاد و پنجمین نشست گپ گرافیک، با سخنرانی حسین شیخ زادگان و حامد بهتاش در مبحث چاپ با موضوع یک قدم تا چاپ کار خود را آغاز کرد. در زیر بخشی از ارائهی وی آمده است:
باتوجه به اینکه امروزه هنرگرافیک به عنوان عامل موثر در گسترش صنعت محسوب میشود و بخشی از آن میباشد، گاها به عنوان فن گرافیک نیز تعریف میشود. بیشتر کارهای گرافیکی جهت کاربردی شدن و قابل استفاده قرارگرفتن، نیاز به گسترهای به نام چاپ دارد، که بدون اطلاع از این صنعت شاهد کاستیهایی در ارائه آثار گرافیکی خواهیم بود. ابتدا اطلاعات بنیادی چاپ مورد توجه قرار میگیرد.
-تفاوت رنگهای RGB و CMYK که رنگ CMYK اساس صنعت چاپ میباشد.
آشنایی با مفهوم ترام به عنوان کوچکترین جز صنعت چاپ
آشنایی با زوایا و خطاهای مربوط به آن مثلا مسئله پیچازی و اندازه و انواع شکل ترام و ترامهای مورد استفاده در چاپهای مختلف و خطاهای مربوط به ترام مثلا چاقی یا لاغری و رفع مشکلات آن
آشنایی با کلیات رجیستر و اهمیت و شناخت کلی آن و بحث کالربار
بعداز آشنایی با مفاهیم کلی چاپ، اکنون با خطاهای رایج در چاپ افست آشنا میشویم:
خطاهای مربوط به کالیبراسیون دستگاه ( میزان رنگ دهی در چاپ) که جهت اصلاح این خطا، استفاده از ترکیبهای مطمئن است.
خطای رجیستر یا روی همخوری چاپ که برای اصلاح این خطا ابتدا با مفهوم Overprint یا Multiplay آشنا شدیم و طریقه اجرای آن با روشهای مختلف مورد بررسی قرار دادیم.
سپس به بحث در مورد رنگهای پنتون، مخصوصا رنگهایی که جلای فلزی دارند بر روی کاغد و میزان پوششدهی آنها پرداخته شد.
در آخر جلسه، طریقه چیدمان فایلهای چاپی بر روی زینک یا پلیت مورد بررسی قرار گرفت.
سپس به پرسش و پاسخ های همکاران و دوستان عزیز پرداخته و جمعبندی نهایی انجام شد.
The way in which material is transferred from the tip of the consumable electrode into the weld pool has a significant influence on the overall performance of GMAW.
it affects process stability, spatter generation, weld quality and the positional capabilities of the process.
Phenomenological studies of the mode of metal transfer have been carried out using high-speed cine or stroboscopic cine and video techniques.