During the course, we had to develop some projects and assemblies on CAD using the Advaced GT&D dimensioning system to label the work.
In the attachments are presented some of the final assembly and dimensions given to the products
During the course, we had to develop some projects and assemblies on CAD using the Advaced GT&D dimensioning system to label the work.
In the attachments are presented some of the final assembly and dimensions given to the products
Our most recent triangle cutter, which for years has been an optimum solution for fixed weight portion production for cheese types of different dimensions and density (“grana”, Leerdamer, Montasio, Asiago, and so forth), fulfils the present market requirements: higher productivity, reduction of scraping, remote connection for programming and data transfer.
Sbavatura intersezione fori sospensioni mezzi pesanti. Un cliente dell’industria automotive stava cercando una nuova soluzione per un problema di sbavatura e ci ha contattati. Per la produzione di sistemi di sospensione circa 10.000 fori venivano sbavati manualmente ogni anno. Era necessario migliorare questo processo, complesso e non sicuro. Attraverso un utensile della serie X-Bores della Heule, la soluzione per la sbavatura di fori intersecati è stata semplice.
Una volta implementato l’utensile Heule, il cliente è stato in grado di eliminare completamente il processo di sbavatura manuale. La lavorazione è diventata completamente automatizzata. Oggi il cliente può godere di un processo sicuro e stabile grazie agli utensili Heule.
Newsletter Lika Electronic luglio 2018 in italianoLika Electronic
Encoder assoluto ASB62 per motori gearless e servo. ASB62 è un encoder rotativo assoluto per il feedback di posizione e velocità in motori gearless e servo. L’albero sporgente conico e la flangia a espansione garantiscono un accoppiamento estremamente sicuro e senza il rischio di slittamenti.
During the course, we had to develop some projects and assemblies on CAD using the Advaced GT&D dimensioning system to label the work.
In the attachments are presented some of the final assembly and dimensions given to the products
Our most recent triangle cutter, which for years has been an optimum solution for fixed weight portion production for cheese types of different dimensions and density (“grana”, Leerdamer, Montasio, Asiago, and so forth), fulfils the present market requirements: higher productivity, reduction of scraping, remote connection for programming and data transfer.
Sbavatura intersezione fori sospensioni mezzi pesanti. Un cliente dell’industria automotive stava cercando una nuova soluzione per un problema di sbavatura e ci ha contattati. Per la produzione di sistemi di sospensione circa 10.000 fori venivano sbavati manualmente ogni anno. Era necessario migliorare questo processo, complesso e non sicuro. Attraverso un utensile della serie X-Bores della Heule, la soluzione per la sbavatura di fori intersecati è stata semplice.
Una volta implementato l’utensile Heule, il cliente è stato in grado di eliminare completamente il processo di sbavatura manuale. La lavorazione è diventata completamente automatizzata. Oggi il cliente può godere di un processo sicuro e stabile grazie agli utensili Heule.
Newsletter Lika Electronic luglio 2018 in italianoLika Electronic
Encoder assoluto ASB62 per motori gearless e servo. ASB62 è un encoder rotativo assoluto per il feedback di posizione e velocità in motori gearless e servo. L’albero sporgente conico e la flangia a espansione garantiscono un accoppiamento estremamente sicuro e senza il rischio di slittamenti.
Study of a Gear-Rack and links System: Equations, configuration and CAD designPietro Galli
The study dealt with the Designing of a mechanism form a starting configuration. Development of equations (Study of the motion and of the velocities), CAD files and engineer drawings (Using Solidworks)
Plant layout of a Warehouse for a big toys companyPietro Galli
The project dealt with the definition of all the characteristics of a Warehouse using the principles of the Kaizen and of Lean manufacturing. The main points of the analysis were the following:
• Definition of the optimal geographical area were to build the Warehouse considering the connections among cities that will be served.
• Definition of the flux of the goods
• Definition of the Industrial shelving needed considering the dimension and frequency of movement of the goods.
• Definition of the plant layout of the Warehouse considering the principle of Lean manufacturing and the safety norms.
• Definition of the Forklift trucks needed
• Definition of the personnel needed
• Definition of the proper heating system
• Definition of the light system
The calculus were performed using Excel and the plant layout using Autocad and Solidworks
PARROQUIA NUESTRA SEÑORA DE LOS DOLORES
MISA DOMINICAL NIÑOS
DE LA PASTORAL DE LOS NIÑOS
DOMINGO XV TO CICLO B, EVANGELIO SEGÚN SAN MARCOS 6, 7-13
A nosotros, como cristianos se nos ha encomendado la sagrada misión de continuar el mismo trabajo de Cristo.
Ser llamado por Dios y predicar su palabra no es cosa fácil.
La única manera de impulsar una "nueva evangelización" es purificar e intensificar esta
vinculación con Jesús. No habrá nueva evangelización si no hay nuevos
evangelizadores, y no habrá nuevos evangelizadores si no hay un contacto más vivo,
lúcido y apasionado con Jesús. Sin él haremos todo menos introducir su Espíritu en el
mundo.
PEREIRA – COLOMBIA
2012
Fuente: http://www.youtube.com/user/Escucharlavoz
SUSTAINABLE APPROACH OF RECYCLING PALM OIL MILL EFFLUENTUSING INTEGRATED BIO...SAJJAD KHUDHUR ABBAS
SUSTAINABLE APPROACH OF RECYCLING PALM OIL MILL EFFLUENTUSING INTEGRATED BIOFILM MEMBRANE FILTRATION SYSTEM FORINTERNAL PLANT USAGE
A biofilm is any group of microorganisms in which cells stick to each other and often these cells adhere to a surface. These adherent cells are frequently embedded within a self-produced matrix of extracellular polymeric substance (EPS).
Simulation of a small scale cogeneration system using a microturbinePietro Galli
The aim of the thesis was to develop an operating model of some sizes of Microturbines on the software eQuest.
Then used the model developed to simulate the installation of a Cogeneration (CHP) plant to satisfy the heat and electric demand of a school. The final step was to consider the economics of the investment and choosing which size and use of the turbine was the most convenient for the building.
The key topics of the project were the following:
• Collecting experimental data about some size of Microturbines
• Development of the turbine model for the software eQuest
• Development of the building following the ASHRAE standard
• Simulation of some size of Cogeneration Plants
• Analysis of the results of the simulations
• Energy auditing of the building and analysis of the cost of the current and new plant
• Choice of the best solution for the building
The thesis was developed in collaboration between Politecnico di Torino and the University of Illinois at Chicago, during the course of the double degree program TOP-UIC
Design of a Handle Mechanism (Solidworks)Pietro Galli
The project was developped on Solidworks and dealt with the costruction of an Hadle mechanism, the study of its motion and the Finite Element Analysis (FEA) of the assembly.
Bachelor's Thesis: Use of CAD technologies to optimize the productivity of a ...Pietro Galli
The Thesis was developed during the Internship at Plurigest SRL. It deals with one of the projects done during that experience. In particular the aim of this was to provide a plant layout for a Pellet Heating system.
All the components of the plant were designed on Solidworks and AutoCAD. Then was performed a study of the layout of the components in order to provide best solution in terms of space used and functioning.
If you’d like discover more about this project in the attachment there is the pdf version of the thesis (Italian language) and some pictures. For more info please contact me
The project included the realization on Soliworks of some tools to realize through 3D printing. The components had to respect some important characteristics in order to be being 3D printable
Pictures and drawings of the assembly are reported
In this project was realized a gear mechanism able to move and its motion was studied
In the attachment you can find some of the video of its motion and the pictures of the gears
Computation of a gearbox for a wind power plantPietro Galli
The project Computation of a Gearbox for a Wind Power Plant dealt with the study and the analysis of the Generator in order to provide data about the following characteristics
o Static Design of the gearbox:
Design of shaft 1
Design of bearings
Internal stresses
Safety factor
Design of shaft 2
o Fatigue analysis:
Shaft 1 section 3
Shaft 1 section 4
Shaft 2 section 1
Shaft 2 section 2
o Rolling bearings analysis, life and fatique:
Roller bearings C and D
Bearing E
Rating life_bearing D
Rating life_bearing E
o Spur gears analysis:
Computation of transmission ratio, pt and b
Tooth bending strength
Tooth surface fatigue strength
Solar Energy Equipment: Design of a solar plant for a buildingPietro Galli
The project dealt with the design of a solar plant heating-system for a building. The following analysis were performed:
• Data collection and preliminary design: (building characteristics and geographical information)
• Estimation of the how water demand
• Evaluation of the Irradiance:
• Computation of the volume of the hot storage tank and definition of its insulation
• Off-Design Calculations
• F-chart
• Thermal balance of the solar panel
• Heat exchanger analysis
• Exergy Analysis for each component of the plant (Collectors, Tank, Boiler)
• Economics and cost analysis
• Determination of the temperature profile of the thermal fluid along the pipe (Using MatLab)
Study of a Gear-Rack and links System: Equations, configuration and CAD designPietro Galli
The study dealt with the Designing of a mechanism form a starting configuration. Development of equations (Study of the motion and of the velocities), CAD files and engineer drawings (Using Solidworks)
Plant layout of a Warehouse for a big toys companyPietro Galli
The project dealt with the definition of all the characteristics of a Warehouse using the principles of the Kaizen and of Lean manufacturing. The main points of the analysis were the following:
• Definition of the optimal geographical area were to build the Warehouse considering the connections among cities that will be served.
• Definition of the flux of the goods
• Definition of the Industrial shelving needed considering the dimension and frequency of movement of the goods.
• Definition of the plant layout of the Warehouse considering the principle of Lean manufacturing and the safety norms.
• Definition of the Forklift trucks needed
• Definition of the personnel needed
• Definition of the proper heating system
• Definition of the light system
The calculus were performed using Excel and the plant layout using Autocad and Solidworks
PARROQUIA NUESTRA SEÑORA DE LOS DOLORES
MISA DOMINICAL NIÑOS
DE LA PASTORAL DE LOS NIÑOS
DOMINGO XV TO CICLO B, EVANGELIO SEGÚN SAN MARCOS 6, 7-13
A nosotros, como cristianos se nos ha encomendado la sagrada misión de continuar el mismo trabajo de Cristo.
Ser llamado por Dios y predicar su palabra no es cosa fácil.
La única manera de impulsar una "nueva evangelización" es purificar e intensificar esta
vinculación con Jesús. No habrá nueva evangelización si no hay nuevos
evangelizadores, y no habrá nuevos evangelizadores si no hay un contacto más vivo,
lúcido y apasionado con Jesús. Sin él haremos todo menos introducir su Espíritu en el
mundo.
PEREIRA – COLOMBIA
2012
Fuente: http://www.youtube.com/user/Escucharlavoz
SUSTAINABLE APPROACH OF RECYCLING PALM OIL MILL EFFLUENTUSING INTEGRATED BIO...SAJJAD KHUDHUR ABBAS
SUSTAINABLE APPROACH OF RECYCLING PALM OIL MILL EFFLUENTUSING INTEGRATED BIOFILM MEMBRANE FILTRATION SYSTEM FORINTERNAL PLANT USAGE
A biofilm is any group of microorganisms in which cells stick to each other and often these cells adhere to a surface. These adherent cells are frequently embedded within a self-produced matrix of extracellular polymeric substance (EPS).
Simulation of a small scale cogeneration system using a microturbinePietro Galli
The aim of the thesis was to develop an operating model of some sizes of Microturbines on the software eQuest.
Then used the model developed to simulate the installation of a Cogeneration (CHP) plant to satisfy the heat and electric demand of a school. The final step was to consider the economics of the investment and choosing which size and use of the turbine was the most convenient for the building.
The key topics of the project were the following:
• Collecting experimental data about some size of Microturbines
• Development of the turbine model for the software eQuest
• Development of the building following the ASHRAE standard
• Simulation of some size of Cogeneration Plants
• Analysis of the results of the simulations
• Energy auditing of the building and analysis of the cost of the current and new plant
• Choice of the best solution for the building
The thesis was developed in collaboration between Politecnico di Torino and the University of Illinois at Chicago, during the course of the double degree program TOP-UIC
Design of a Handle Mechanism (Solidworks)Pietro Galli
The project was developped on Solidworks and dealt with the costruction of an Hadle mechanism, the study of its motion and the Finite Element Analysis (FEA) of the assembly.
Bachelor's Thesis: Use of CAD technologies to optimize the productivity of a ...Pietro Galli
The Thesis was developed during the Internship at Plurigest SRL. It deals with one of the projects done during that experience. In particular the aim of this was to provide a plant layout for a Pellet Heating system.
All the components of the plant were designed on Solidworks and AutoCAD. Then was performed a study of the layout of the components in order to provide best solution in terms of space used and functioning.
If you’d like discover more about this project in the attachment there is the pdf version of the thesis (Italian language) and some pictures. For more info please contact me
The project included the realization on Soliworks of some tools to realize through 3D printing. The components had to respect some important characteristics in order to be being 3D printable
Pictures and drawings of the assembly are reported
In this project was realized a gear mechanism able to move and its motion was studied
In the attachment you can find some of the video of its motion and the pictures of the gears
Computation of a gearbox for a wind power plantPietro Galli
The project Computation of a Gearbox for a Wind Power Plant dealt with the study and the analysis of the Generator in order to provide data about the following characteristics
o Static Design of the gearbox:
Design of shaft 1
Design of bearings
Internal stresses
Safety factor
Design of shaft 2
o Fatigue analysis:
Shaft 1 section 3
Shaft 1 section 4
Shaft 2 section 1
Shaft 2 section 2
o Rolling bearings analysis, life and fatique:
Roller bearings C and D
Bearing E
Rating life_bearing D
Rating life_bearing E
o Spur gears analysis:
Computation of transmission ratio, pt and b
Tooth bending strength
Tooth surface fatigue strength
Solar Energy Equipment: Design of a solar plant for a buildingPietro Galli
The project dealt with the design of a solar plant heating-system for a building. The following analysis were performed:
• Data collection and preliminary design: (building characteristics and geographical information)
• Estimation of the how water demand
• Evaluation of the Irradiance:
• Computation of the volume of the hot storage tank and definition of its insulation
• Off-Design Calculations
• F-chart
• Thermal balance of the solar panel
• Heat exchanger analysis
• Exergy Analysis for each component of the plant (Collectors, Tank, Boiler)
• Economics and cost analysis
• Determination of the temperature profile of the thermal fluid along the pipe (Using MatLab)
Solar Energy Equipment: Design of a solar plant for a building
Some components dimensiond using GT&D
1. R24
120
R47
3x M
8
3x M5
A
A
SCALE 1 : 1
70
5,5
15
36
14
2x45°
32
H7
A-A
1 : 1
0.2 A
0.1 M A B
0.1
0.1 A B
0.2 A
B
C
A
Torino
di
Politecnico
ALLIEVO
Politecnico di Torino - Corso Duca degli Abruzzi, 24 - 10129 TORINO
MATERIALE
DESCRIZIONE
SQUADRA E CORSO
Q.TA'
SCALA
DATA
UNI EN 22768-mK
FOGLIO
Disegno N.
PESO (Kg)GRADO DI FINITURA
1:2
02/04/2015Supporto superiore
-
A3 1/1
0.5x45°
05/03/2015 15:37:53
Creato
( )
OGGETTO
Pietro Galli
SolidWorks Educational Edition.
For Instructional Use Only.
2. 90 g6
A
A
0.2 A
B
R6
15
65
5
G6
3
4
0,93x45°
M12
31
36,08
32 g6
0.1
0.1 A B
0.1 A B
0.2 B
A
C
Torino
di
Politecnico
ALLIEVO
Politecnico di Torino - Corso Duca degli Abruzzi, 24 - 10129 TORINO
MATERIALE
DESCRIZIONE
SQUADRA E CORSO
Q.TA'
SCALA
DATA
UNI EN 22768-mK
FOGLIO
Disegno N.
PESO (Kg)GRADO DI FINITURA
1:1
02/04/2015Flangia di bloccaggio
-
A3 1/1
0.5x45°
07/03/2015 18:07:14
Creato
( )
OGGETTO
Pietro Galli
SolidWorks Educational Edition.
For Instructional Use Only.
3. 4x 18
150
R47
3x 9
A
A
0.1 A B
0.1 A B
8,6
4x45°
6x45°
190
70
24
15
A-A
0.150.2
0.2 A
A
B
Torino
di
Politecnico
ALLIEVO
Politecnico di Torino - Corso Duca degli Abruzzi, 24 - 10129 TORINO
MATERIALE
DESCRIZIONE
SQUADRA E CORSO
Q.TA'
SCALA
DATA
UNI EN 22768-mK
FOGLIO
Disegno N.
PESO (Kg)GRADO DI FINITURA
1:2
02/04/2015Flangia_superiore
-
A3 1/1
0.5x45°
07/03/2015 16:32:47
Creato
( )
OGGETTO
Pietro Galli
SolidWorks Educational Edition.
For Instructional Use Only.
4. 4
p6
M12
1x45°
56
21 3
20
1x45°
28
12
12 f6
0.1
0.1 A0.2 A
0.1 A B
A
B
Torino
di
Politecnico
ALLIEVO
Politecnico di Torino - Corso Duca degli Abruzzi, 24 - 10129 TORINO
MATERIALE
DESCRIZIONE
SQUADRA E CORSO
Q.TA'
SCALA
DATA
UNI EN 22768-mK
FOGLIO
Disegno N.
PESO (Kg)GRADO DI FINITURA
2:1
02/04/2015Perno filettato
-
A3 1/1
0.5x45°
05/03/2015 16:42:47
Creato
( )
OGGETTO
Pietro Galli
SolidWorks Educational Edition.
For Instructional Use Only.
5. 3x 5,5
R24
B
B
0.1 A B
90°
2x45°
8
21
13
3
72
2,85
B-B
0.1
0.1 A
A
B
Torino
di
Politecnico
ALLIEVO
Politecnico di Torino - Corso Duca degli Abruzzi, 24 - 10129 TORINO
MATERIALE
DESCRIZIONE
SQUADRA E CORSO
Q.TA'
SCALA
DATA
UNI EN 22768-mK
FOGLIO
Disegno N.
PESO (Kg)GRADO DI FINITURA
2:1
02/04/2015Piastra superiore
-
A3 1/1
0.5x45°
05/03/2015 16:23:11
Creato
( )
OGGETTO
Pietro Galli
SolidWorks Educational Edition.
For Instructional Use Only.