1) SMC provides pneumatic equipment, automation solutions, and engineering services for various industries including mining.
2) They have a large network of local branches across Australia to provide demonstrations, assistance with cost savings, and support.
3) SMC can customize solutions for specialized applications and harsh environments through their engineering division and manufacturing capabilities.
SMC Australia provides pneumatic components and automation solutions for food processing applications to help maintain food safety while improving performance and profits. Their pneumatic cylinders, air preparation equipment, and speed controls can increase productivity in packaging, processing, and automation without compromising sanitation requirements in the food industry.
Incorporated in 1995, SMC India is a 100% Subsidiary of SMC Corporation Japan, the WORLD'S LARGEST manufacturer of Pneumatics, Electro-pneumatics, Vacuum and Instrumentation components.
The document provides instructions for removing and installing various components of a Caterpillar 903C2 compact wheel loader engine, including:
- Removing the fuel manifold by removing bolts and disconnecting fuel injection lines.
- Removing fuel injection lines by disconnecting hoses and removing clamps and bolts.
- Removing the turbocharger by disconnecting hoses and removing mounting bolts.
- Removing the exhaust gas recirculation valve by removing mounting bolts and disconnecting hoses.
World Group Co. Middle East is a Lebanese company that has manufactured engine cooling system flushing and diagnostic machines since 1993. It produces a range of machines for flushing and diagnosing cooling systems for vehicles from motorcycles to heavy machinery. The document provides details on the various machine models, their specifications, and the diagnostic tools and cleaning products also offered by the company. It outlines the company's vision, mission, goals and commitment to quality and innovation in serving the engine cooling system industry.
World Group Co. Middle East manufactures engine cooling system flushing and diagnostic machines serving automotive and heavy duty industries. It provides a full range of machines from small personal vehicles up to heavy earth moving equipment. The document describes the company's product lines and features of various machine models aimed at different industry sectors. It emphasizes product quality, durability, and after-sales support in serving customers across multiple countries since 1993.
Afcm 2015 successful commissioning of ok mill at pt semen gresik v insiteCharlotte Backmann
FLSmidth presentation from the AFCM conference in Vietnam, 21-24 April 2015: Succesful commissioning of the OK vertical roller mill at PT Semen Gresik in Indonesia
Afcm 2015 successful commissioning of ok mill at pt semen gresik v insiteFLSmidth & Co. A/S.
Presentation from the AFCM cement conference taking place from 21-24 April in Hanoi, Vietnam: Successful commissioning of the OK vertical roller mill at PT Semen Gresik in Indonesia
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjekksemm
This document provides instructions for servicing components of a 973C track loader, including:
- Removing and installing the turbocharger, which involves disconnecting hoses, removing nuts and bolts, lifting the turbocharger off, and reversing steps to install.
- Removing and installing the exhaust manifold, which involves removing nuts and washers, disassembling the manifold into pieces, checking studs, installing new gaskets, and reassembling.
- General safety information is also provided, such as wearing protective equipment when working with refrigerant lines and avoiding contact with hot coolant.
SMC Australia provides pneumatic components and automation solutions for food processing applications to help maintain food safety while improving performance and profits. Their pneumatic cylinders, air preparation equipment, and speed controls can increase productivity in packaging, processing, and automation without compromising sanitation requirements in the food industry.
Incorporated in 1995, SMC India is a 100% Subsidiary of SMC Corporation Japan, the WORLD'S LARGEST manufacturer of Pneumatics, Electro-pneumatics, Vacuum and Instrumentation components.
The document provides instructions for removing and installing various components of a Caterpillar 903C2 compact wheel loader engine, including:
- Removing the fuel manifold by removing bolts and disconnecting fuel injection lines.
- Removing fuel injection lines by disconnecting hoses and removing clamps and bolts.
- Removing the turbocharger by disconnecting hoses and removing mounting bolts.
- Removing the exhaust gas recirculation valve by removing mounting bolts and disconnecting hoses.
World Group Co. Middle East is a Lebanese company that has manufactured engine cooling system flushing and diagnostic machines since 1993. It produces a range of machines for flushing and diagnosing cooling systems for vehicles from motorcycles to heavy machinery. The document provides details on the various machine models, their specifications, and the diagnostic tools and cleaning products also offered by the company. It outlines the company's vision, mission, goals and commitment to quality and innovation in serving the engine cooling system industry.
World Group Co. Middle East manufactures engine cooling system flushing and diagnostic machines serving automotive and heavy duty industries. It provides a full range of machines from small personal vehicles up to heavy earth moving equipment. The document describes the company's product lines and features of various machine models aimed at different industry sectors. It emphasizes product quality, durability, and after-sales support in serving customers across multiple countries since 1993.
Afcm 2015 successful commissioning of ok mill at pt semen gresik v insiteCharlotte Backmann
FLSmidth presentation from the AFCM conference in Vietnam, 21-24 April 2015: Succesful commissioning of the OK vertical roller mill at PT Semen Gresik in Indonesia
Afcm 2015 successful commissioning of ok mill at pt semen gresik v insiteFLSmidth & Co. A/S.
Presentation from the AFCM cement conference taking place from 21-24 April in Hanoi, Vietnam: Successful commissioning of the OK vertical roller mill at PT Semen Gresik in Indonesia
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjekksemm
This document provides instructions for servicing components of a 973C track loader, including:
- Removing and installing the turbocharger, which involves disconnecting hoses, removing nuts and bolts, lifting the turbocharger off, and reversing steps to install.
- Removing and installing the exhaust manifold, which involves removing nuts and washers, disassembling the manifold into pieces, checking studs, installing new gaskets, and reassembling.
- General safety information is also provided, such as wearing protective equipment when working with refrigerant lines and avoiding contact with hot coolant.
This document provides an overview of Multi Mech Company and its products and services. Some key points:
- Multi Mech is a large group of companies operating in the MENA region, specializing in heavy equipment for industries like aluminum, steel, oil and gas.
- They are the largest operator of aluminum and steel smelters in the region and hold patents for Doosan foundry/aluminum smelter product designs.
- Multi Mech supplies and services equipment through subsidiaries in various countries. They have ISO certifications and facilities in multiple countries, including a large spare parts facility.
- They provide equipment, maintenance, and project management services to major industries and clients. One example
This document summarizes information about SIMPAC, a Korean manufacturer of industrial machinery including presses, automation equipment, and casting machines. It provides an overview of SIMPAC's history since 1973, facilities and production capabilities, product portfolio, sales and references, quality certifications, and global service network with locations in China, India, and other countries. The document consists of details on the company's expansion, awards, financial performance, manufacturing processes, and major client industries.
WOM specializes in the manufacture of Cement Manifolds for a complete range of onshore and offshore applications. These Cement Manifolds are designed for heavy slurry and high pressure.
WOM is a global company that specializes in manufacturing manifolds and flow control equipment for the oil and gas industry. They produce choke and kill manifolds, standpipe manifolds, cement manifolds, and custom manifolds. These manifolds can incorporate valves, chokes, actuators and be designed for H2S environments up to 20,000 psi. WOM also provides components for manifolds like their patented Magnum gate valves, a variety of chokes, and pneumatic or hydraulic actuators.
WOM’s custom manifolds incorporate patented Magnum Dual-Seal technology per customer requirement. They are designed and constructed to provide unmatched quality at a cost-effective price to the customer.
The new Wärtsilä Sea-Master system collects real-time data, providing valuable information about the operational health of the tail shaft equipment helping customers to maximize up-time and lower life-cycle costs.
Standpipe Manifold, WOM Manifold Systems - Worldwide Oilfield Machinewomgroup
Worldwide Oilfield Machine (WOM) specializes in manufacturing manifolds and components for drilling, production, and testing applications onshore and offshore. WOM designs manifolds that can incorporate valves, chokes, and actuators up to 20,000 psi. They provide skid-mounted and automated packages complete with control panels. WOM manufactures a variety of manifolds including choke and kill manifolds, standpipe manifolds, cement manifolds, and custom designs to meet industry requirements.
WOM’s custom manifolds are designed and constructed to provide unmatched quality at a cost-effective price to the customer. WOM’s custom manifolds incorporate patented Magnum Dual-Seal technology per customer requirement.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjfkskefmem
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...ujjfjkskekmme
The document provides instructions for servicing components of a 973C track loader powered by a C9 engine, including removing and installing the turbocharger, exhaust manifold, and air inlet heater. Safety precautions are outlined, such as wearing protective equipment when working with refrigerant or hot coolant, and ensuring all fluids are contained. The removal and installation procedures provide illustrations and specify tools needed and torque specifications.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjkskekdmmenm
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...ufjjjdjkkskme
The document provides instructions for servicing components of a 973C track loader powered by a C9 engine, including removing and installing the turbocharger, exhaust manifold, and air inlet heater. Safety precautions are outlined, such as keeping parts clean, containing fluids, and wearing protective equipment when working with refrigerant lines or hot coolant. Tools needed and step-by-step instructions are provided for removing, installing, and reassembling each component.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fujsefkskekmm
The document provides instructions for servicing components of a 973C track loader powered by a C9 engine, including removing and installing the turbocharger, exhaust manifold, and air inlet heater. Safety precautions are outlined, such as wearing protective equipment when working with refrigerant or hot coolant, and ensuring all fluids are contained. Removal and installation procedures provide step-by-step instructions and require the use of specific tools.
This document provides information about Simetri Group, a Turkish manufacturing group with three factories located in different parts of Turkey. Simetri Group consists of Simetri Tanks in Düzce, Simetri Raf in Istanbul, and SHT in Istanbul. Simetri Tanks, located in Düzce on a 35,000 square meter site, produces over 800 types of metal parts and containers, mainly for the automotive industry, including fuel and oil tanks as well as body parts and fixtures. The document outlines Simetri Tanks' production capacities, export markets, turnover, quality policies and certifications, machinery, and long-term investment targets.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses and removing nuts and bolts.
- Removing and installing the exhaust manifold, which is assembled from three pieces, requiring removal of nuts and installation of new gaskets and nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections and ground strap and removing bolts to detach the air inlet elbow.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses, removing nuts and bolts, and lifting the turbocharger.
- Removing and installing the exhaust manifold, which requires removing nuts and washers, disassembling the manifold, installing gaskets, and tightening nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections, removing bolts, cleaning and applying primer and sealant to the joint face.
- The document provides instructions for removing and installing a turbocharger and exhaust manifold on a Caterpillar 973C track loader.
- To remove the turbocharger, disconnect the hose, remove bolts and tubes, and lift the turbocharger off using lifting equipment.
- To install the turbocharger, apply anti-seize compound, lift the turbocharger into place using lifting equipment, and install and tighten the nuts.
- To remove the exhaust manifold, remove nuts and spacers from studs and remove the manifold and gaskets. To install, check studs, install new gaskets with tabs up, and assemble and position the manifold on the cylinder head.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses, removing nuts and bolts, and lifting the turbocharger.
- Removing and installing the exhaust manifold, which requires removing nuts and washers, disassembling the manifold, installing gaskets, and tightening nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections, removing bolts, cleaning and applying primer and sealant to the heater.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses, removing nuts and bolts, and lifting the turbocharger.
- Removing and installing the exhaust manifold, which requires removing nuts and washers, disassembling the manifold, installing gaskets, and tightening nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections, removing bolts, cleaning and applying primer and sealant to the heater.
This document provides an overview of Multi Mech Company and its products and services. Some key points:
- Multi Mech is a large group of companies operating in the MENA region, specializing in heavy equipment for industries like aluminum, steel, oil and gas.
- They are the largest operator of aluminum and steel smelters in the region and hold patents for Doosan foundry/aluminum smelter product designs.
- Multi Mech supplies and services equipment through subsidiaries in various countries. They have ISO certifications and facilities in multiple countries, including a large spare parts facility.
- They provide equipment, maintenance, and project management services to major industries and clients. One example
This document summarizes information about SIMPAC, a Korean manufacturer of industrial machinery including presses, automation equipment, and casting machines. It provides an overview of SIMPAC's history since 1973, facilities and production capabilities, product portfolio, sales and references, quality certifications, and global service network with locations in China, India, and other countries. The document consists of details on the company's expansion, awards, financial performance, manufacturing processes, and major client industries.
WOM specializes in the manufacture of Cement Manifolds for a complete range of onshore and offshore applications. These Cement Manifolds are designed for heavy slurry and high pressure.
WOM is a global company that specializes in manufacturing manifolds and flow control equipment for the oil and gas industry. They produce choke and kill manifolds, standpipe manifolds, cement manifolds, and custom manifolds. These manifolds can incorporate valves, chokes, actuators and be designed for H2S environments up to 20,000 psi. WOM also provides components for manifolds like their patented Magnum gate valves, a variety of chokes, and pneumatic or hydraulic actuators.
WOM’s custom manifolds incorporate patented Magnum Dual-Seal technology per customer requirement. They are designed and constructed to provide unmatched quality at a cost-effective price to the customer.
The new Wärtsilä Sea-Master system collects real-time data, providing valuable information about the operational health of the tail shaft equipment helping customers to maximize up-time and lower life-cycle costs.
Standpipe Manifold, WOM Manifold Systems - Worldwide Oilfield Machinewomgroup
Worldwide Oilfield Machine (WOM) specializes in manufacturing manifolds and components for drilling, production, and testing applications onshore and offshore. WOM designs manifolds that can incorporate valves, chokes, and actuators up to 20,000 psi. They provide skid-mounted and automated packages complete with control panels. WOM manufactures a variety of manifolds including choke and kill manifolds, standpipe manifolds, cement manifolds, and custom designs to meet industry requirements.
WOM’s custom manifolds are designed and constructed to provide unmatched quality at a cost-effective price to the customer. WOM’s custom manifolds incorporate patented Magnum Dual-Seal technology per customer requirement.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjfkskefmem
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...ujjfjkskekmme
The document provides instructions for servicing components of a 973C track loader powered by a C9 engine, including removing and installing the turbocharger, exhaust manifold, and air inlet heater. Safety precautions are outlined, such as wearing protective equipment when working with refrigerant or hot coolant, and ensuring all fluids are contained. The removal and installation procedures provide illustrations and specify tools needed and torque specifications.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjkskekdmmenm
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...ufjjjdjkkskme
The document provides instructions for servicing components of a 973C track loader powered by a C9 engine, including removing and installing the turbocharger, exhaust manifold, and air inlet heater. Safety precautions are outlined, such as keeping parts clean, containing fluids, and wearing protective equipment when working with refrigerant lines or hot coolant. Tools needed and step-by-step instructions are provided for removing, installing, and reassembling each component.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fujsefkskekmm
The document provides instructions for servicing components of a 973C track loader powered by a C9 engine, including removing and installing the turbocharger, exhaust manifold, and air inlet heater. Safety precautions are outlined, such as wearing protective equipment when working with refrigerant or hot coolant, and ensuring all fluids are contained. Removal and installation procedures provide step-by-step instructions and require the use of specific tools.
This document provides information about Simetri Group, a Turkish manufacturing group with three factories located in different parts of Turkey. Simetri Group consists of Simetri Tanks in Düzce, Simetri Raf in Istanbul, and SHT in Istanbul. Simetri Tanks, located in Düzce on a 35,000 square meter site, produces over 800 types of metal parts and containers, mainly for the automotive industry, including fuel and oil tanks as well as body parts and fixtures. The document outlines Simetri Tanks' production capacities, export markets, turnover, quality policies and certifications, machinery, and long-term investment targets.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses and removing nuts and bolts.
- Removing and installing the exhaust manifold, which is assembled from three pieces, requiring removal of nuts and installation of new gaskets and nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections and ground strap and removing bolts to detach the air inlet elbow.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses, removing nuts and bolts, and lifting the turbocharger.
- Removing and installing the exhaust manifold, which requires removing nuts and washers, disassembling the manifold, installing gaskets, and tightening nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections, removing bolts, cleaning and applying primer and sealant to the joint face.
- The document provides instructions for removing and installing a turbocharger and exhaust manifold on a Caterpillar 973C track loader.
- To remove the turbocharger, disconnect the hose, remove bolts and tubes, and lift the turbocharger off using lifting equipment.
- To install the turbocharger, apply anti-seize compound, lift the turbocharger into place using lifting equipment, and install and tighten the nuts.
- To remove the exhaust manifold, remove nuts and spacers from studs and remove the manifold and gaskets. To install, check studs, install new gaskets with tabs up, and assemble and position the manifold on the cylinder head.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses, removing nuts and bolts, and lifting the turbocharger.
- Removing and installing the exhaust manifold, which requires removing nuts and washers, disassembling the manifold, installing gaskets, and tightening nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections, removing bolts, cleaning and applying primer and sealant to the heater.
This document provides instructions for servicing components of a Caterpillar 973C track loader powered by a C9 engine, including:
- Removing and installing the turbocharger, involving disconnecting hoses, removing nuts and bolts, and lifting the turbocharger.
- Removing and installing the exhaust manifold, which requires removing nuts and washers, disassembling the manifold, installing gaskets, and tightening nuts.
- Removing and installing the air inlet heater by disconnecting electrical connections, removing bolts, cleaning and applying primer and sealant to the heater.
1. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SMC & the Mining Industry
SMCandtheMiningIndustry
2. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SMC AUSTRALIA
Dedicated local branch support
THE LARGEST SUPPORT NETWORK IN AUSTRALIA
Sydney, NSW (Head Office)
Melbourne, VICTORIA
Adelaide, STH. AUSTRALIA
Perth, W. AUSTRALIA
Brisbane, QUEENSLAND
Townsville, QUEENSLAND
3. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SMC – RESEARCH & DEVELOPMENT
With Technical Centers located
in Japan, China, Europe and
the United States employing
over 1,400 engineers, SMC
can offer innovative and cost
effective solutions to its
customers through a product
range consisting of nearly
620,000 variations.
4. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SMC WORLD
SMC corporation has 63 subsidiary or affiliated companies across 50 nations, with
bases of operations in all major markets.
Japan, North America, Europe, Asia and Oceania
Components can be sourced from SMC subsidiary companies worldwide, with expert
support and after sales service provided through a network of local branches.
5. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
SMC has been providing pneumatic solutions to the resources sector since 1968 including
development of components to withstand some of the most aggressive environments known
to industry.
6. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
For accurate control
CS1 Heavy Duty Steel Cylinder fitted with IP8101 Positioner
Series CS1 air cylinder is SMC's largest bore cylinder. This series is available in bore sizes up
to 300mm and stroke lengths up to 1520mm. Additionally, the CS1 can be ordered auto-switch
capable. Other options include various mounting configurations, cushion for noise damping,
and lubrication optional.
7. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
Up to every challenge
Long Stroke CS1 Cylinders
The heavy duty CS1 range offers aluminum or steel tube with steel end covers. This
extremely robust pneumatic cylinder is preferred in mining and resource industries with
options such as mounted solenoid valves, position control and feedback or a range of
sensors mounted directly to the cylinder.
8. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
50% lighter than the CS1
CS2 Aluminum Large Bore Cylinder
Where weight is critical such as in transport applications, the CS2 range of large bore
cylinders offers all aluminum tube and end covers.
Reduced weight means more payload.
9. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
CPV ‘500’ Bore Cylinder with Smart Positioner
With bore sizes up to 500mm diameter and composite tube construction this cylinder
range has been designed for process valve actuations. Also available with position
control and feedback sensing as required.
10. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
C96 ISO Cylinder Ranges
If meeting ISO standards is a requirement, a new addition to the cylinder range is C96
and enlarge bore C95 expanding the ISO range bore size to 250mm. This cylinder is
available with a large range of mounting and clevis attachment options.
11. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
Custom Valve/Cylinder Application
For any special applications, the Technical Division of your nearest SMC outlet can assist
with the local design and manufacture of specialty large bore pneumatic cylinders to
meet most industry requirements
12. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
Cylinder with integral air reservoir - no requirement for
a separate air receiver to facilitate fail safe operation
Cylinder with integral transducer for
intrinsically safe operation
Cylinder, positioner and stainless steel control
cabinet arranged for marine water wash down
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
13. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
PNEUMATIC PRODUCTS SPECIFICALLY
DESIGNED FOR HARSH ENVIRONMENTS
1 2
3 4
5 6
Floatation Cells1
Laboratory Automation2
Coal Wagon Dump Doors3
Dart Valve Cylinders4
Cyclone Actuation5
Load Out Tunnel Cylinders6
14. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
The IP8101 is a rotary type smart positioner that will
control the accurate positioning of pneumatic
cylinders or process valves.
The cylinder or valve can be controlled accurately to
maintain any selected position between fully open and
fully closed as determined from your control system.
IP8100 Range
Safely isolate and lockout (LOTO) your compressed air
services. Use the AVL Slow Start and Isolation Valve.
Manual and Electric / Manual versions.
AVL
PROCESS PRODUCTS
FOR THE MINING INDUSTRY
15. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
Measure process air requirements, benchmark
and identify leakage easily with PF2A Flow
meters.
FLOW METERS
PROCESS PRODUCTS
FOR THE MINING INDUSTRY
Process valves with power saving coils.
Reduce energy and coil temperature
significantly. Improved valve performance
with VXE Valves.
PROCESS VALVES
16. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
COMPRESSED AIR PREPARATION
• Filtration to 0.01 micron
• Dew Point Suppression
• Pressure Regulation
• Pressure Drop Minimisation
• Flow Measurement
Filter Regulators Mainline Filtration
Shut-off Valves Fittings / Couplers Air Dryers
17. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
CONTROL SYSTEMS
SMC currently provides a range of pneumatic and
electric control cabinets to a wide variety of
manufacturing industries.
With Control divisions in all major centres of Australia
and New Zealand, SMC engineers will design to your
requirements.
18. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
CONTROL SYSTEMS
• Mining / Resource
• Water Industry
• Industrial
• Manufacturing
• Food and Pharmaceutical
• Transport
• Research
SUPPORTING ALL SECTORS
19. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
MINITEC
SMC products used in conjunction with MiniTec components can provide a large number of
customer solutions. The Minitec modular structural framing system is the fastest and easiest
assembled, cost effective t-slot construction system.
Ideal for building custom products as an alternative to welded steel frames.
The MiniTec Profile System has been proven in applications in virtually all industries.
Aluminum construction the fast, low cost way
20. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SMC provides a range of pneumatic and electric pick and place solutions and components. With a
strong background in industry automation
SMC has the capacity to provide automation solutions to your requirements.
SUMMARY – SMC SUPPORTS
ALL INDUSTRY
21. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY - SUPPLY & DELIVERY
SMC Engineering and design office employs 20 graduate engineers and a support team of
technicians creating CAD 3D models, 2D drawing and drafting.
22. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY - SUPPLY & DELIVERY
SMC factory and warehouse area (Sydney, Head office) now exceeds 21,000 (m2) thus
enabling SMC to provide you quick access to products and service.
23. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY - OUR APPROACH
TO INDUSTRY
• Specialist SMC teams of experts – Automotive, Electronic, Food and Packing and
Life Science
• Experts who understand the ‘real’ issues and demands of specific industry
sectors and specific industry applications
• A partnership approach – our people working with you
• One common goal – customer satisfaction
24. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY - OUR COMMITMENT
TO INNOVATION
• We are 100% committed to the design and development of highly innovative
products for industrial automation applications
• To provide our customers with cost effective ‘New Technology’ solutions
• To improve the operating performance of machines in automation applications
• To bring the benefits of new technology to the market
• To help ensure our customers’ business success
25. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY – SIMPLE &
SPECIAL OPTIONS
• Simple Options – Standard products which can be selected with customised
‘shopping list’ options and assembly possibilities
• Special Options – Standard products customised specifically and exclusively for
your exact needs and application
26. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY – HELPING TO MEET
GLOBAL MANUFACTURERS’ NEEDS
• A customer-centric approach – utilising our global engineering resources to help
reduce wastage and manufacturing costs
• A One-Stop-Shop: One supplier, a single solution
• Economies of scale – inventory stock held in our warehouses
• Product development specifically for your applications
27. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY – A GLOBAL COMMITMENT TO
QUALITY AND THE ENVIRONMENT
• ISO 9001 – International Quality Control and Quality Assurance System adopted
and extensively used throughout SMC subsidiaries
• Commitment to reduce environmentally harmful substances in our products
and manufacturing processes
28. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY – GLOBAL CUSTOMER
SUPPORT
• A specialist global SMC team – working for leading multi-national manufactures
• Selected SMC experts located around the world – working together to help
develop strategic partnership programs for multi-national organisations
• Specialist with a clear understanding of the issues and needs of multi-national
organisations and their manufacturing processes
29. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY – AN EXTENDED ARRAY
OF DOCUMENTATION
• Single product catalogues
• Quick to reference overview style catalogues
• Core information mid-level product catalogues
• Complete documentation
30. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY – ONLINE SUPPORT
• Online information on all our products
• Powerful search capabilities
• Online configurations and software tools
• CAD Downloads in all popular formats
31. For a demonstration & further information on how SMC can assist
you with cost savings contact your local SMC branch office or SMC
representative.
Customer Service: 1800 Pneumatics (1800 763 862)
About SMC
The Tools
Process
Air
Ctr Systems
MiniTec
Summary
Click topic to view
SMC Pneumatics (Australia) Pty LtdSMC and the Mining Industry
SMCandtheMiningIndustry
www.smcaus.com.au
SUMMARY - OUR APPROACH
TO INDUSTRY
• To provide our customers with outstanding service and support
• To develop new products and activities to help our customers achieve their goals
• To work closely with our customers as ‘trusted’ partners, not just ‘suppliers’
Our customers are the life blood of our organisation and their
success is inextricably linked hand-in-hand with ours!