revit_practicing1
•
0 likes•43 views
The document is a floor plan showing dimensions and labels for rooms of a house. It includes a scale of 1/8 inch equals 1 foot. There are labels for a garage, master bedroom, closet, living room, master bathroom, dining room, and mud room. Ventilation details are also provided, such as dryer vents venting to the exterior and bath fans also venting outside. Insulation and footing details are included.
Report
Share
Report
Share
Download to read offline
Recommended
Demo Mansion sheet plans
This document contains architectural drawings for a residential building project titled "EL MANSION DEMO". It includes floor plans, furniture layouts, elevations, sections, and schedules for doors and rooms. The drawings were created in Autodesk Revit and depict two levels of floor plans, exterior elevations, and other building details. Miguel Zamarripa is listed as the author of the drawings.
plan
The document is a floor plan for a school building. It includes four classrooms ranging from 525 to 600 square feet. It also shows an office, storage areas, and toilets. Dimensions and notes provide additional information about room sizes, partitions, doors, and equipment.
Singapore Project. 35 36 North Canal Road
The document contains architectural plans for the Heng Fai Enterprises building located at 35-36 North Canal Road in Singapore. The plans show each floor of the building and include dimensions and descriptions of the various rooms. There are five storeys depicted with spaces allocated for offices, meeting rooms, a canteen, reception area, parking lot, and other facilities. Finishes and materials are specified, including concrete floors, walls, and ceilings along with glass walls and doors.
15-106 3
This document is an architectural design drawing for a proposed two-storey side extension with attached garage at an existing property. The drawing provides details of the proposed ground floor and first floor plans, including new windows, doors, walls and other structural elements. Dimensions and technical specifications are included to fully describe the proposed construction work.
SW-102-AAD - Layout with both skids
The document contains technical specifications and details for equipment, piping, and components for a jelly and flan plant layout including:
- Dimensions and specifications for tanks, pumps, pipes, mixers, and other equipment.
- Identification of low and high temperature process areas with operating temperatures ranging from 50/55°C to 70/75°C.
- Notes indicating the document is a Piping and Instrument Diagram and provides the title, customer information, and copyright details for the engineering drawing.
sem 2.5 measured drawings
This document provides a floor plan layout and details for an office building. It includes labels for various rooms, areas, and levels. It also includes door schedules, window details, ornament dimensions, and other architectural information. Key information presented includes layouts for the ground floor, first floor, and roof levels. Dimensions and other specifications are provided for doors, windows, and architectural features.
Rustomjee urbania acura brochure 780 Favista Real Estate
The document provides details of a residential property for sale located in Rustomjee Urbania near Majiwada, Thane. It includes specifications for a 2 BHK flat measuring 831 square feet priced at Rs. 7,500,000 with additional charges totaling Rs. 481,723. A payment schedule outlines 14 stages of payment totaling 100% of the cost to be paid over time, with a 20% down payment required. Floor plans and amenities of the residential project are also described.
revit_practicing
This document contains architectural drawings for a building project including front, rear, right, and left elevations at scales of 1/16"=1" and 1/8"=1". The drawings were created on October 24, 2016 at 3:41 PM and checked by someone other than the author.
Recommended
Demo Mansion sheet plans
This document contains architectural drawings for a residential building project titled "EL MANSION DEMO". It includes floor plans, furniture layouts, elevations, sections, and schedules for doors and rooms. The drawings were created in Autodesk Revit and depict two levels of floor plans, exterior elevations, and other building details. Miguel Zamarripa is listed as the author of the drawings.
plan
The document is a floor plan for a school building. It includes four classrooms ranging from 525 to 600 square feet. It also shows an office, storage areas, and toilets. Dimensions and notes provide additional information about room sizes, partitions, doors, and equipment.
Singapore Project. 35 36 North Canal Road
The document contains architectural plans for the Heng Fai Enterprises building located at 35-36 North Canal Road in Singapore. The plans show each floor of the building and include dimensions and descriptions of the various rooms. There are five storeys depicted with spaces allocated for offices, meeting rooms, a canteen, reception area, parking lot, and other facilities. Finishes and materials are specified, including concrete floors, walls, and ceilings along with glass walls and doors.
15-106 3
This document is an architectural design drawing for a proposed two-storey side extension with attached garage at an existing property. The drawing provides details of the proposed ground floor and first floor plans, including new windows, doors, walls and other structural elements. Dimensions and technical specifications are included to fully describe the proposed construction work.
SW-102-AAD - Layout with both skids
The document contains technical specifications and details for equipment, piping, and components for a jelly and flan plant layout including:
- Dimensions and specifications for tanks, pumps, pipes, mixers, and other equipment.
- Identification of low and high temperature process areas with operating temperatures ranging from 50/55°C to 70/75°C.
- Notes indicating the document is a Piping and Instrument Diagram and provides the title, customer information, and copyright details for the engineering drawing.
sem 2.5 measured drawings
This document provides a floor plan layout and details for an office building. It includes labels for various rooms, areas, and levels. It also includes door schedules, window details, ornament dimensions, and other architectural information. Key information presented includes layouts for the ground floor, first floor, and roof levels. Dimensions and other specifications are provided for doors, windows, and architectural features.
Rustomjee urbania acura brochure 780 Favista Real Estate
The document provides details of a residential property for sale located in Rustomjee Urbania near Majiwada, Thane. It includes specifications for a 2 BHK flat measuring 831 square feet priced at Rs. 7,500,000 with additional charges totaling Rs. 481,723. A payment schedule outlines 14 stages of payment totaling 100% of the cost to be paid over time, with a 20% down payment required. Floor plans and amenities of the residential project are also described.
revit_practicing
This document contains architectural drawings for a building project including front, rear, right, and left elevations at scales of 1/16"=1" and 1/8"=1". The drawings were created on October 24, 2016 at 3:41 PM and checked by someone other than the author.
Construction Document set
This document contains architectural drawings and notes for a building project located at 289 Tappan Street in Brookline, MA. It includes floor plans, elevations, and sections of the building showing wall types and materials. Notes provide information on construction requirements, dimensions, building codes, and specifications.
Civil and Architecture Portfolio
The document contains architectural drawings and details for a green house project. It includes a cover sheet, floor plans, elevations, schedules, sections and a site plan. The floor plans show the layout and dimensions of the first and second floors. The elevations depict the building from all four sides. Schedules list the doors, windows and other building components. Sections cut through the building to reveal structural details. The site plan orients the green house on the property.
Isbell Remodel - Schematic Pkg - Aug 13, 2015
The document includes plans and drawings for a master bath addition to an existing home. It shows schematic floor plans, framing plans, building sections, elevations, window schedules, and interior and exterior perspectives. The addition includes a master bath, walk-in closet, and lower roof extension over an existing loft area.
BEHRMANN_BROOKE MEDICAL OFFICES ID 312 FALL 2016
This document contains a cover sheet, general notes, and door schedule for a construction project. It lists various door hardware combinations and notes for the project, including that all doors and frames are to meet building standards unless noted otherwise. Door types include single glass, double glass, and single panel doors. The general notes provide requirements for items like silencers on door frames, undercutting doors, fire rated walls, and coordinating with other contractors.
AIA 2015-2016 PLAN SET
This document is a cover sheet and set of schedules for a student design project submission for a high school architecture design contest. It includes a sheet index, specifications for the "Vincent Vega Chalet" including its square footage and amenities. Floor plans, elevations, and sections are referenced. Schedules provide information on doors, windows, finishes, and other elements of the design. The design is for a vacation home in Mount Charleston, Nevada seeking to provide a welcoming environment for individuals to escape the city.
632 Lagina Trl - Sheet - A1-00 - FLOOR PLAN
The document is a floor plan for renovations to an existing market building. It shows the layout of new and existing spaces including a new meat department, covered cart area, restrooms, and grease interceptor. Notes provide information on lighting requirements, fire safety measures like extinguishers and exit signs, door hardware heights and egress, and materials like the concrete sealer. A door schedule lists existing door sizes and types.
ARCH 2121 Metro Dental JAS2016
This architectural drawing set provides plans, elevations, sections and details for a proposed dental office remodel project. The first page includes a title sheet with project information and a sheet index. Subsequent sheets include a floor plan showing room layout and dimensions, door and finish schedules, reflected ceiling plans, elevations, building sections and wall sections, as well as construction detail drawings.
More Related Content
Similar to revit_practicing1
Construction Document set
This document contains architectural drawings and notes for a building project located at 289 Tappan Street in Brookline, MA. It includes floor plans, elevations, and sections of the building showing wall types and materials. Notes provide information on construction requirements, dimensions, building codes, and specifications.
Civil and Architecture Portfolio
The document contains architectural drawings and details for a green house project. It includes a cover sheet, floor plans, elevations, schedules, sections and a site plan. The floor plans show the layout and dimensions of the first and second floors. The elevations depict the building from all four sides. Schedules list the doors, windows and other building components. Sections cut through the building to reveal structural details. The site plan orients the green house on the property.
Isbell Remodel - Schematic Pkg - Aug 13, 2015
The document includes plans and drawings for a master bath addition to an existing home. It shows schematic floor plans, framing plans, building sections, elevations, window schedules, and interior and exterior perspectives. The addition includes a master bath, walk-in closet, and lower roof extension over an existing loft area.
BEHRMANN_BROOKE MEDICAL OFFICES ID 312 FALL 2016
This document contains a cover sheet, general notes, and door schedule for a construction project. It lists various door hardware combinations and notes for the project, including that all doors and frames are to meet building standards unless noted otherwise. Door types include single glass, double glass, and single panel doors. The general notes provide requirements for items like silencers on door frames, undercutting doors, fire rated walls, and coordinating with other contractors.
AIA 2015-2016 PLAN SET
This document is a cover sheet and set of schedules for a student design project submission for a high school architecture design contest. It includes a sheet index, specifications for the "Vincent Vega Chalet" including its square footage and amenities. Floor plans, elevations, and sections are referenced. Schedules provide information on doors, windows, finishes, and other elements of the design. The design is for a vacation home in Mount Charleston, Nevada seeking to provide a welcoming environment for individuals to escape the city.
632 Lagina Trl - Sheet - A1-00 - FLOOR PLAN
The document is a floor plan for renovations to an existing market building. It shows the layout of new and existing spaces including a new meat department, covered cart area, restrooms, and grease interceptor. Notes provide information on lighting requirements, fire safety measures like extinguishers and exit signs, door hardware heights and egress, and materials like the concrete sealer. A door schedule lists existing door sizes and types.
ARCH 2121 Metro Dental JAS2016
This architectural drawing set provides plans, elevations, sections and details for a proposed dental office remodel project. The first page includes a title sheet with project information and a sheet index. Subsequent sheets include a floor plan showing room layout and dimensions, door and finish schedules, reflected ceiling plans, elevations, building sections and wall sections, as well as construction detail drawings.
Similar to revit_practicing1 (7)
revit_practicing1
- 1. 54' - 0" 30' - 0" 24' - 0" 15'-11"10'-0"13'-4" 41'-3" 1'-0"1'-0" 30' - 0" 11' - 0" 6' - 0" 13' - 0" 23'-0"18'-3" 41'-3" Garage 1 Master bdrm 2 Closet 3 Living 4 Master bthrm 5 Dining 6 Mud room 7 Scale Project number Date Drawn by Checked by www.autodesk.com/revit 1/8" = 1'-0" 10/24/20163:40:28PM A102 Main Floor Project Number Owner: THUONG Project Name Issue Date Author Checker VENTING SCHEDULE FOOTING SCHEDULE INSULATION SCHEDULE Dryers Vent Vent To Exterior All Bath Fans Vent To Exterior Range Hoods Vent Through Roof Dryers Vent Vent To Exterior All Bath Fans Vent To Exterior Range Hoods Vent Through Roof Garage walls 18''x9'' Min Bearing walls 20''x9'' Min Deck & Porches 18''x9'' Min House walls 20''x9'' Min ATTIC VENTILATION AREA / 300 PROVIDE 1MIN AIR GAP AT EAVE INSULATION BAFFEL TYP. AT ALL BAYS PROVIDE GAPBLE ATT GABLE END PROVIDE GALF ROOF VENT ON BACKSIDE OF ROOFLINE ABOVE CONDITION AREA MAIN FLOOR PLAN SCALE 1/8''=1'' No. Description Date