Resume of Mostafa(rev.9)

of 12
Objective To build up dynamic career as a Mechatronics Engineer, utilizing my academic background as
well as experience to help my company and my country.
KeyQualification Total over 13 years of experience in different Engineering field and different countries. One &
huff years in Qatar with international Engineering & Construction Company and 11 years in
Bangladesh.
I have completed, B.Sc. in Mechatronics Engineering
Experienced user of AutoCAD & 3ds MAX, also familiar with Lumion, Adobe Photoshop,
CorelDraw, Corel video studio, Adobe Audition, LOGO soft Comfort, MS Word and MS Power
point.
Experienced in Mechanical & architected detailed drafting of 2D, 3D & Isometric design, using
by AutoCAD software.
Experienced in Presentation of Animation & Prospective Visualization (interior & Exterior),
using by 3ds MAX
Experienced in PLC Programming for Automation System, using by LOGO soft Comfort
software.
Checking of all preliminary drawing Tender drawing and Construction Drawing.
Academic
Details
2012
B.Sc. in Mechatronics Engineering
CGPA - 3.22
World University of Bangladesh (WUB)
Govt. & University grand commotion (UGC) Approved, Dhaka, Bangladesh.
1998
Diploma in Power Engineering (Automobile)
First Division
Kushtia Polytechnic Institute, Kushtia.
Bangladesh Technical Education Board (BTEB), Dhaka, Bangladesh.
1995
Secondary School Certificate (Arts)
First Division
Kasbiamajil A.H. High School
Dhaka Education Board, Bangladesh
Mailing Address:
Md. Golam Mostafa
Mechanical Engineer
Development Design Consultant Ltd.
47 Mohakhali C/A, Dhaka-1212, Bangladesh
Mobile Bangladesh: 0088-01712220842,
E-mail: golam_mostafa34@yahoo.com
Résumé of
MUHAMMAD GOLAM MOSTAFA

of 12
Workexperience From April 2011 to Till Date
Development Design Consultant Ltd.
47 Mohakhali C/A, Dhaka-1212, Bangladesh
Job status : Mechanical Engineer & Project Coordinator
Code No : 04-604
Description of Project :
Name of assignment or project : Feasibility Study and Detail Engineering Design of
Ganges Barrage Study Project
Consultant : Development Design Consultant Ltd.
In Association with
BETS, BCL, ACE (BAN), DIVINE Associates, ACE
(PAK), NASPAK, SMEC (AUS) & CWRC (CHINA)
Client : Bangladesh Water Development Board
Location : Pangsha, Rajbari, Bangladesh
Main project features : Allied structures, embankments, hydraulic structures,
barrage & allied structures, reservoir, guide bunds,
RTWs, irrigation and drainage systems, hydraulic
structures, regulators, sluice gates, flood
embankments, navigation lock, fish pass, hydropower
plant, gas transmission line etc.
Job Responsibility:
As a Mechanical Engineer I use to design the various assignments assigned to Development
Design Consultant Ltd. I participated and participating are described below:
Mechanical Works:
I have tasked the mechanical equipment of
ganges Barrage Study Project including Radial
gates, Slide fixed wheel gates, Stoplogs, hoisting
system, gantry cranes, mobile crane and overhead
bridge cranes ect.
Architectural design Works:
I have done the Architectural design of ganges
Barrage, barrage facilities area, tourism area,
workshop Area ect. I have also completed the
animated visualization of ganges Barrage.
Coordinating Tasks:
 Support Project consultants with Project
Technical tasks.
 Co-ordinates team activities to ensure that
 projects meet goals of timing, quality.
 Performing general administrative duties for a
unit management team and broader team when
required.
 Prepare technical project report.
 Monitoring and administration of time reports.
 Manage Team meeting ,workshop,
Teambuilding, internal conferences.
 Prepare presentations, briefing papers for
meetings.

of 12
From January 2008 – April 2011
Sanmar Properties Ltd.
58, Agrabad C/A, Chittagong-4100, Bangladesh.
Job status: CAD Engineer
Job Location: Dhaka, Bangladesh
Job Responsibility:
As a CAD Engineer I use to design the various assignments assigned to
Sanmar Properties Ltd. I participated and participating are described below:
Sanmar (Design and Development Deportment):
Worked as CAD Technician various Architectural design in Draw 2D, 3D & 3D studio Max of
various national and private projects as follows:
Shovana:
Worked as Exterior 3D of 15-storied Residential
Apartment Building at Nondankakon, Chittagong,
Bangladesh.
Tasnim:
Apartment Building at Nizam road, Chittagong,
Bangladesh.
Hatkhola Commercial:
Worked as Exterior 3D of 15-storied Shopping cum
Residential Apartment Complex Building at Dhaka,
Bangladesh.
Ali General Hospital:
Worked as Exterior 3D of 10-storied Privet
Hospital at Dhaka, Bangladesh
Panchlaish:
Apartment Building at Chittagong, Bangladesh.

of 12
Sanmar Tower-1:
Worked as Exterior 3D of 18-storied Office Building
of Sanmar Properties limited at Chittagong,
Bangladesh.
Sanmar Sierra:
RL Parkview:
Mohanagar:
Worked as Exterior 3D of Various storied
Residential & commercial Apartment Building
Complex at Chittagong, Bangladesh.
Garden Grove:
Apartment Building at Nazam Road, Chittagong,
Bangladesh.
Azam Elanza:
Apartment Building at Nasirabad, Chittagong,
Bangladesh.
Golf Drive Renge:
3D Animation of Golf Driver Range at Chittagong,
Bangladesh.

of 12
Probortok:
Worked as Exterior 3D Presentation of 12-storied
commercial come Residential Building at Nasirabad
Chittagong, Bangladesh.
Sanmar Tower-2:
Worked as Exterior 3D of 14-storied Office Building
of Sanmar Properties limited at Gulshan-2, Dhaka,
Bangladesh.
Grand Karim:
Building at Khulshi, Chittagong, Bangladesh.
Santino:
Building at 76, Devpahar, College Road,
Amadora:
Building at 56 KB Abdus Sattar Road, Rahmatgonj,
Mandira:
Worked as Exterior 3D and Working Drawing Detail
of 6-storied Residential Building at 27, Schtist Babu
Lane, Patharghata, Chittagong, Bangladesh.
Ocean City:
Worked as Exterior & interior 3D and Detail working
plan of Lift lobby, Office dining and toilet of Sanmar
Properties limited at Chittagong, Bangladesh.

of 12
Monabi:
Worked as interior 3D of Bed Room, Living Room,
Kitchen, Toilet and Reception of apartment at
Khulshi, Chittagong, Bangladesh.
Mayfair:
Worked as interior 3D of Bed Room, Living Room,
Kitchen, Toilet and Reception Building at Khulshi,
Magnolia Reception:
Worked as interior 3D of Reception of apartment at
Floriana Receiption:
Montoro Reception:
Park Velly Reception:
Silver Spring Reception:

of 12
Casablanca Reception:
From September 2006 – November 2007
IWI Limited. Ras Laffan, Qatar.
Job status: CAD & Piping Engineer
Description of Project :
Employer : GS-DAEWOO Engineering & Construction
Contractor Job No. : EPSCC1/ EPSCC2
Contractor Job No. : 7S19
Project Name : Laffan Refinery Project
Owner : Qatar Petroleum
Company : Qatar Gas
Site : Ras Laffan Industrial City, State of Qatar
The $800 mm project is a joint venture of QP
(80%), Exxon Mobil (10%) and Total (10%). It has
planned processing capacity of 146,000 barrels per
day (bpd) of gas condensates. Laffan Refinery, is a
100% export oriented project, will produce LPG,
naphtha, heavy naphtha, kerosene and butane
using North Field condensate.
Job Responsibility:
As a CAD Engineer, I used to design various assignments which are assigned by GS-
DAEWOO Sub Contractor IWI, I participated and participating are described below:
IWI Qatar (Fabrication Shop):
Working as CAD Engineer various piping & Work Shop design in Draw 2D, 3D, 3DstudioMax &
Pas Program Operating in this Project as follows below:
2D, 3D & detailing design IWI fabrication SS work
shop at Ras Laffan, Qatar.
3D of MANIFOLD SKETCH FOR HYDRO TEST
(G-HTM-01)
Pas Program:
I am Working as minted & inputted the Drawing control, Pipe joint, Pipe spool, spool material
etc, in the pas program.

of 12
From September 1999 to September 2006
Development Design Consultant Ltd. Dhaka, Bangladesh.
Job status: CAD Technician
Job Responsibility:
As a CAD Technician I use to design the various assignments assigned to DDC. Some
projects I participated and participating are described below
DDC Centre (Architectural Section):
Worked as CAD Technician various Architectural design in Draw 2D, 3D & 3DstudioMax of
various national and private projects as follows:
Redesign, 3D of 20-storied Health Bhaban under
Ministry of Health, Family Planning and Welfare at
Mohakhali, Dhaka,
3D of 15-storied Building, Dhaka Stock Exchange,
Bangladesh
3D Animation of Flyover and RAJDHANI
UNNAYAN KARTRIPAKKHA (RAJUK) at Kuril
Intersection, Dhaka.
3D of 13-storied Corporate Office Building of Delta
life insurance company limited at Plot No. 37, Road
No. 45, Gulshan North Commercial Area. Dhaka.
3D of 15-storied Bangladesh Cancer Hospital and
Welfare Home at 52/C Darus Salam, Mirpur,
Dhaka-1216. Under MINISTRY OF HALTCH.

of 12
3D of 8-storied Bangladesh Bank Training
Academy Complex at Mirpur Dhaka of
BANGLADESH BANK.
3D of 8-storied Bangladesh Bank at Barisal of
BANGLADESH BANK.
3D of 20-storied Family Planning Services Bhaban
at Kawran Bazar, Dhaka. Under MINISTRY OF
HEALTH AND FAMILY WELFARE.
3D of 17-storied IEB Bhaban under Institute of
Engineers Bangladesh (IEB), Ramna, Dhaka.
3D of Three Railway station building (Srimangal,
Bharmanbaria and Kulaura) under Government of
the People’s republic of Bangladesh Ministry of
Communication, Roads and Railway Division
BANGLADESH RAILWAY Office of the E.N.C.
Project. Chittagong.
3D Animation of 20-storied Health and Population
Bhaban under Ministry of Health, Family Planning
and Welfare at Mohakhali, Dhaka,

of 12
3D Animation of 10-storied Shopping cum
Residential Apartment Complex for teachers of
Dhaka University at campus premises.
3D Animation of Atrium space of 5-Star Hotel
Sheraton, Dhaka, Bangladesh under the project
Expansion of Dhaka Sheraton Hotel.
 Preparation of 2D & 3D Drawings for proposal of International Competition on Duxton
Plain Housing Project under Singapore National Housing Board.
 Preparation of 2D Working Drawings for Mechanical, Fire Fighting and Air Conditioning
systems of 12-storied Office Building for Bangladesh Bank, Barisal.
 Preparation of 2D Working Drawings for Mechanical, Fire Fighting and Air Conditioning
systems for proposed 12-Storied New Academic Building of Bangladesh University of
Engineering & Technology (BUET), Palashi, Dhaka.
S1-CMMU PACKAGE:
Working as CAD Technician in the design of S1-CMMU PACKAGE: Baseline/ Repeat survey
of existing health & family welfare. Government of the People’s Republic of Bangladesh.
THREE BRIDGE PROJECT:
Working as CAD Technician in the design of three bridges project which include 1.63km
Mukterpur bridge on Dhaka Munshiganj road, 423m length Third Buriganga bridge at Bashila,
and 302m length Second Sitalakhya bridge at Demra.
Cemex Cement (BD) Limited:
Worked as CAD Specialist in the Cement Factory project at Mahmudnagar, Narayanganj for
Cemex Cement (BD) Ltd. and responsible for the structural drawing of steel structures & truss
for conveyor belt, jetty, silo, production room, office building etc. using AutoCAD Software.
Bhairab Bridge Project:
Worked as CAD Specialist in the design of Bhairab bridges project witch toll plaza building that
is, canopy, police station, control and maintenance building, substation, and control of Bhairab
bridge. Responsible for the Structural and Architectural system drawing using AutoCAD
Software.
The City Bank Limited:
Worked as CAD Specialist in the design of proposed 35-storied office building of The City Bank
Ltd. at Dilkusha, Dhaka and responsible for the layout plans, structural and service drawings
using AutoCAD Software.
Palli Karma Shahayak Foundation (PKSF):
Worked as CAD Specialist for Corporate Proposed 21 Storied Office Complex of Palli Karma
Sahayak Foundation (PKSF) at Agargaon, Dhaka. And responsible for the Structural and
Mechanical system drawing using AutoCAD Software

of 12
Bangladesh General Insurance Company (BGIC):
Worked as CAD Specialist for Corporate Proposed 20 Storied commercial Building of
Bangladesh General Insurance Company (BGIC) at Topkhana Road, Dhaka. And responsible
for the structural drawing using AutoCAD Software.
Rupsha Bridge Project:
Worked as CAD Technician for Rupsa Bridge Construction Project Preparation of the detail
drawing of Main Bridge, Canal Bridge, Box Culvert and Roads using Auto CAD Software; A
Joint venture between Leading Consultant DDC Ltd. (Bangladesh), PACIFIC CONSULTANT
INTERNATIONAL (Japan) and CONSULTING ENGINEERS SERVICES (India).
Other Experiences CATSEL
Computer Aided Technical Service Ltd:
Working as my personal office responsibilities of making Architect, engineering, GIS &
Graphics. Presentation drawings using AutoCAD 2D, 3D, CorelDraw, Adobe Photoshop & 3D
Studio Max from: June 2003 to till date.
Some projects I participated and participating are described below.
Vestige Architects, Dhaka, Bangladesh:
Working as part time Architect with responsibilities of making presentation drawings using
AutoCAD 2D, 3D, CorelDraw & 3D Studio Max from: October 2002 to March 2003.
Consulting Services Associates Limited, Dhaka, Bangladesh:
Working as part time Architect with responsibilities of making presentation drawings using
AutoCAD 2D, 3D, CorelDraw & 3D Studio Max from: September 2001 to September 2002.
ACS. Computers, Dhaka, Bangladesh:
Worked as part time teacher/instructor of AutoCAD 2D, 3D & 3D Studio Max to trainees of
Graduate and Diploma Engineers to from: February 2000 to July 2001.

of 12
Training Attended Industrial Attachment:
Successfully attended and completed industrial attachment at Kushtia Sugar Mill for two
months.
ComputerSkills Software and Packages:
Experienced user of AutoCAD & 3ds MAX, also familiar with Lumion, Adobe Photoshop,
CorelDraw, LOGO soft Comfort, MS Word and MS Power point. Trained from DEVELOPMENT
DESIGN CONSULTANT LTD. in Bangladesh.
Languages Speak, Read and Write: Bengali & English.
Personal Details Father’s Name : Md. Golam Noki
Mother’s Name : Mrs. Ambia Begum
Date of Birth : 30th December, 1979
Nationality : Bangladeshi (by birth)
Religion : Islam (Sunni)
Sex : Male
Marital Status : Married
References 1. AKM NASIRUDDIN
DIRECTOR
Development Design Consultants Limited.
Tel : Off. 8815231
PABX 8822980, 9883374
Res. 9661689
Mobile : 018-240588
Fax : 880-2-8810337
E-mail : ddcl@biib.net, ddcl@bdonline.com
2. Ishtiak Ahmed Ttaslim
Principal Architect
Design & Development Department
Sanmar Properties Ltd.
Tel : Off. 088-02-8836944, 088-02-9892120, EXT. 119
Mobile : 088-01713376431
E-mail : taslim_68@yahoo.com
Declaration of Authenticity:
I certify that all information stated in the curriculum vitae is true and complete to the best of my knowledge. If required
and where applicable, this information can be supported by appropriate & authentic certificates/papers.
Muhammad Golam Mostafa

Resume of Mostafa(rev.9)

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to Resume of Mostafa(rev.9)

Similar to Resume of Mostafa(rev.9) (20)

Resume of Mostafa(rev.9)