Rui Yao is seeking a full-time engineering position starting in 2015 utilizing his chemical engineering degree and skills. He has a B.S. in Chemical Engineering from The Ohio State University with a 3.02 GPA. His internship experience includes working as an Associate Product Engineer at SK&F of GlaxoSmithKline in China where he conducted production planning, safety inspections, sieve analysis, and product quality analysis. Rui is fluent in English and Chinese and has experience using MATLAB, CHEMCAD, COMSOL, SolidWorks, and JMP. His academic projects include senior design projects testing adhesive films and unit operation experiments in liquid-liquid extraction and mixing.

1. Rui Yao
Ryao1989@gmail.com | 731 N Azusa ave West Covina, CA 91791 | 567- 525-9169
OBJECTIVE
Engineering full-time opportunity starting 2015 utilizing technical knowledge and skills obtained in chemical engineering
coursework.
EDUCATION
The Ohio State University, Columbus, Ohio Overall GPA (4.00 scale): 3.02
B.S. Chemical Engineering, August 2012 - December 2014
The University of Findlay, Findlay, OH
August 2010 - May 2012 (transferred out)
INTERNSHIP EXPERIENCE
Associate Product Engineer at SK&F of GlaxoSmithKline, Tianjin, China (June, 2014 - July 2014)
- Responsible for production planning and production safety
- Conducted a GMP self-inspection of the company site and generated a report after the inspection
- Analyzed the sieve used in industry, provided a new data set for the sieves based on the current ISO
- Analyzed product quality using multiple sieves and vibration sifter
- Served as interpreter for visitors from U.K
QUALIFICATIONS
- Extensive use of MATLAB
- Introductory experience with Chemical Engineering software : CHEMCAD , COMSOL
- Introductory experience with SolidWork, JMP
- Fluent in English and Chinese
ACADEMIC ENGINEERING PROJECTS
Senior Design Project, October 2014
- Collaborated with four students to design a test measure the failure rate of an adhesive film, a product of Entrotech.
- Tested the film under different conditions:dwell temperature, dwell time, peel rate, prestress.
- Response for data collection and documentation throughout experiment.
- Found adhesive films had high failure rate in high prestress and high temperature conditions .
- Presented the results to professor, class, and company.
Unit Operation Lab, May 2014
- Collaborated with three students to conduct four biotechnology experiments including: liquid-liquid extraction,
plate heat ex-changer, mixing dynamic, adsorption.
- Collected and documented data throughout each experiment.
- Utilized MATLAB and CHEMCAD to scale-up the unit in order to predict a real-life production efficiency.
- Inspected eight other supplemental experiments widely used in chemical production.
Ventilator Simulation Design project, October - November, 2013
- Design a ventilator model, simulated an air flow in a room.
- Utilized COMSOL to draw the geometry of a room including a ventilator; generated a flow profile of the
air in the room.
- Provided the documentation throughout the project, delivered a presentation to the whole classmates.
Advanced Energy Vehicle Designed Project, February - April, 2013
- Collaborated with two students to build a small autonomous, electric motor-powered, propeller-driven vehicle
that maneuvered along a monorail track system.
- Utilized MATLAB and Arduino to control the vehicle velocity and moving direction.
ACTIVIITIES AND INTERSTES
- Active member of Chinese Students and Scholars Society (CSSS) in OSU, Columbus ,April 2013 .
- Event coordinator of Chinese Student Association (CSA), The University of Findlay 2010-2012.