To re-box an ECO E/ERW machine, remove the packing materials and parts A, B, and C from the box. Place the machine into the box and fit part A along the left side. Fit part B and lower part C halfway into the box with the foot pedal on the rear ledge. Push the binding handle forward and lower part C fully before closing and sealing the lid with tape.

1. How to Re-box
ECO E/ERW

2. Open box and
Remove packing
Part A, B and C

4. Place machine in box.

6. Fit part A along left and
move machine to fit in cut out
in Part A

8. Fit part B

10. Fit part C half way down into
box

12. Reach in through the open
end of Part C and place foot
pedal on lower rear ledge of
part C

14. Push binding handle to from
of box. Lower part C down into
final position

15. Close lid of box
and seal with tape