Brendan David McCown has achieved numerous qualifications and standards related to aeronautical engineering, including National Certificates in Aeronautical Engineering for Aircraft Powerplant, Aircraft Mechanical, and Aircraft Structures. He has achieved standards from Level 1 to Level 6, with the majority at Levels 3, 4, and 6, demonstrating extensive knowledge and skills in areas such as aircraft materials, engines, structures, systems, and certification processes for maintenance.
The document is an examination results notification for an API-510 Pressure Vessel Inspector Certification exam. It provides an analysis of the examinee's performance in each major section of the exam by showing the percentage of questions answered correctly in each section. It then states that the examinee achieved a passing score of 106, which met the passing score of 86, and congratulates them on passing the exam.
El documento habla sobre Martha y una prueba. No proporciona suficiente contexto o detalles para generar un resumen más allá de esto en 3 oraciones o menos.
El documento describe la retirada del general José Miguel Carrera y sus tropas en 1820 luego de una batalla contra las fuerzas chilenas. Algunos oficiales traicionaron a Carrera y se amotinaron, entregándolo junto a otros oficiales a las autoridades de Mendoza. Carrera y el coronel Benavente fueron encarcelados con grilletes y maltratados. El comandante de las fuerzas de Mendoza, Albín Gutiérrez, tenía un pasado humilde como arriero y pulpero antes de convertirse en un importante comerciante de v
The document is an examination results notification for an API-510 Pressure Vessel Inspector Certification exam. It provides an analysis of the examinee's performance in each major section of the exam by showing the percentage of questions answered correctly in each section. It then states that the examinee achieved a passing score of 106, which met the passing score of 86, and congratulates them on passing the exam.
El documento habla sobre Martha y una prueba. No proporciona suficiente contexto o detalles para generar un resumen más allá de esto en 3 oraciones o menos.
El documento describe la retirada del general José Miguel Carrera y sus tropas en 1820 luego de una batalla contra las fuerzas chilenas. Algunos oficiales traicionaron a Carrera y se amotinaron, entregándolo junto a otros oficiales a las autoridades de Mendoza. Carrera y el coronel Benavente fueron encarcelados con grilletes y maltratados. El comandante de las fuerzas de Mendoza, Albín Gutiérrez, tenía un pasado humilde como arriero y pulpero antes de convertirse en un importante comerciante de v
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Este documento ofrece consejos sobre cómo mejorar la lectura en voz alta y fomentar el hábito de la lectura entre niños y jóvenes. Explica que la mejor manera de aprender a leer es leyendo, y que se debe leer en voz alta con frecuencia en familia y en la escuela de manera divertida y sin presión. También describe las diferentes etapas del desarrollo lector de los niños y los tipos de libros más adecuados para cada edad, con el objetivo final de formar lectores autónomos que disfr
El trabajo mismo, siete capitulos de "La Faz social del
Pueblo Araucano", bo necesita recomendación. de su fuente
mas intachable podemos desear para conocer la etnologia y
el folklore mapuche que las descripciones dados por un hijo
de la misma nacion?
El documento describe varios tipos de plantas xerofitas o adaptadas a la sequía, incluyendo cactus, suculentas, nopales, visnagas y otras. Estas plantas presentan adaptaciones como espinas, hojas carnosas, almacenamiento de agua y ubicaciones en desiertos que les permiten sobrevivir con poca agua. Se mencionan varias familias botánicas como Cactaceae, Crassulaceae, Euphorbiaceae y otras que incluyen plantas suculentas.
Este documento presenta un resumen de la memoria escrita por William Yates sobre las guerras civiles argentinas de 1820 y 1821, en las que participó José Miguel Carrera. La memoria de Yates fue publicada originalmente en inglés como un apéndice en el Diario de María Graham. El texto también discute las traducciones y usos previos de la memoria de Yates por historiadores argentinos y chilenos. Finalmente, analiza la traducción al español realizada en 1888 por Luis L. Domínguez.
This unofficial student transcript summarizes Stuart James Nevin's academic record and achievement in obtaining a Master of Engineering in Mechanical Engineering from The Queen's University of Belfast. It details his course of study from 2010 to 2015, including marks obtained in modules across 6 academic years of undergraduate and postgraduate study in Mechanical and Manufacturing Engineering and Mechanical Engineering. The transcript notes that Stuart graduated with First Class Honours and was awarded his Master's degree in June 2015.
This document is a diploma supplement for Matiss Zarins from Business Academy Aarhus. It provides details about his completed Automotive Technology program, including information about the courses and exams taken between the 1st and 4th terms, an internship completed at SIAdomenikks in Riga, Latvia, and a final project on lean work environments. The supplement also describes the program's structure, level, length, requirements, grading scheme, and access to further study opportunities.
The document discusses accreditation in engineering education. It outlines the three steps in developing as an engineering professional: 1) obtaining an accredited educational qualification, 2) gaining professional registration after formative development, and 3) qualifying for an international register. International agreements like the Washington, Sydney, and Dublin Accords provide mutual recognition of accredited qualifications between countries. The Federation of Engineering Institutions of Asia and the Pacific (FEIAP) works to raise engineering education standards across Asia and the Pacific through guidelines. Accreditation helps ensure continuous improvement in education quality and developing skilled human resources for countries.
This document is an official transcript from the University of Bradford confirming that Ali Masood completed a Bachelor of Engineering in Electrical and Electronic Engineering with First Class Honours from Namal College. It details his personal information, qualification details, module results and credits over several levels, and certification from the Academic Registrar. The transcript explains the University's regulations regarding modules, credits, progression requirements, and award classifications.
This document provides a summary of Charles C. Uwakwe's qualifications and experience. He has a Master's degree in Computer Security and over 5 GWO certifications. He has experience working in rope access, rigging, security, and facilities maintenance. He is seeking new opportunities that make use of his computer skills, certifications, and willingness to travel for work.
Gopalakrishnan S is applying for an engineer position in aerospace and aircraft manufacturing. He has over 6 years of experience working in machining processes and aerospace manufacturing. He has skills in production planning, process setup and control, supplier relationship management, and ensuring compliance with quality standards like AS9100 and NADCAP. Gopalakrishnan is interested in the position due to the company's reputation and the opportunity to contribute to the growing field of aircraft manufacturing using his expertise.
Muhammad Shahbaz is a mechanical engineer with over 4 years of experience in the upstream oil and gas industry. He has worked as a mechanical engineer for Pipelink Construction Pvt. Limited since 2014 and as a QC engineer for Marathon Construction Company from 2012 to 2014. His responsibilities have included supervising piping and pipeline fabrication and installation, ensuring safety compliance, and documenting and handing over projects to clients.
This document provides information on the Diploma in Mechanical Engineering program offered by INTEC College. The 240-credit program takes 24 months to complete and covers topics like mechanical engineering, mechanics, mathematics, production planning and control, materials testing, and communication. Successful graduates will have the skills and knowledge to engage in more advanced mechanical engineering studies or related careers. Students are assessed through formative, summative, and project assignments and must pass the final integrated assessments to receive the Diploma in Mechanical Engineering.
This document summarizes fuel consumption and emissions tests of the HydraGenTM technology from Dynacert conducted by FPInnovations PIT Group. Two international tractor-trailer combinations were tested - a test vehicle equipped with HydraGenTM and a baseline control vehicle. Fuel consumption was measured by weighing portable fuel tanks before and after repeated 100km test runs. Emissions of CO, CO2, NOx and THC were also measured from the test vehicle using a portable emissions measurement system. Test results showed reductions in fuel consumption and emissions when the test vehicle was operated with HydraGenTM compared to the baseline vehicle without the technology.
The document is a cover letter and resume submitted by Linu Salam for a position as an HSE Officer. Linu has over 7 years of experience in HSE and safety roles. He currently works as an HSE Officer for Drake & Scull International in Qatar and has previous experience as a Safety Officer and in airport operations roles. Linu has several safety and technical certifications and seeks to leverage his qualifications and experience for a new position.
The document provides information about the Level 6 Graduate Diploma in Engineering offered by City & Guilds, including the qualification structure, assessment methods, and units. Learners must complete core units in their chosen pathway plus optional units. The pathways include civil, electrical, electronic and telecommunications, information technology, and mechanical engineering. Successful completion qualifies learners for registration as an Incorporated Engineer with some professional bodies.
There is high demand for oil and gas safety engineers in India and abroad due to limited training programs. National Safety Academy offers a one-year diploma in oil and gas safety engineering to train professionals for jobs as safety officers, fire officers, and fire engineers. The academy has placement success due to recruiting by organizations in India and globally, and graduates are employed around the world in the safety field.
1) The document discusses technical and vocational education in Bangladesh, outlining certificates, diplomas, and degrees offered as well as enrollment numbers and expenditures.
2) It highlights challenges including quality assurance, accountability, governance, and sustainability issues.
3) The government of Bangladesh is working to improve TVET through updating curricula, increasing monitoring, strengthening industry partnerships, and developing teachers' skills.
The document provides details on an individual's qualifications and experience for the position of E&I Q.C. Inspector. It includes personal information, education history with a Bachelor's degree in Electrical Engineering, over 17 years of experience in various roles and locations, areas of expertise, and descriptions of past roles performing quality control inspections and ensuring compliance with standards and specifications on engineering projects in countries like the UAE, Qatar, Saudi Arabia, Indonesia, and the Philippines.
03_Field HSE Mgr. - Jemmy V. Talatagod (Updated 2016.03.08Jemmy Talatagod
This resume is for Jemmy V. Talatagod, who is applying for the position of Field EHSS Manager. The candidate has over 20 years of experience in their current role and 6 years and 3 months of experience in the proposed position. They are currently employed as the Field HSE Manager for JGC Gulf International Co. Ltd. in Jubail, Saudi Arabia. The candidate's experience includes roles as an HSE Superintendent/Directorate HSE Advisor and Safety Supervisor and Officer for various companies in Saudi Arabia and the Philippines. They hold numerous safety certifications and have a background in Chemical Engineering and Biblical Studies.
This document provides information about competency standards and certification levels in technical vocational education and training (TVET) in the Philippines. It defines key terms like competency standards, basic and common units of competency, and describes the four certification levels (NC I to NC IV). It also outlines sample curricula for TVET specializations in arts and trades, agriculture, and fishery for the K to 12 program. Timetables for automotive and motorcycle servicing courses are included.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Este documento ofrece consejos sobre cómo mejorar la lectura en voz alta y fomentar el hábito de la lectura entre niños y jóvenes. Explica que la mejor manera de aprender a leer es leyendo, y que se debe leer en voz alta con frecuencia en familia y en la escuela de manera divertida y sin presión. También describe las diferentes etapas del desarrollo lector de los niños y los tipos de libros más adecuados para cada edad, con el objetivo final de formar lectores autónomos que disfr
El trabajo mismo, siete capitulos de "La Faz social del
Pueblo Araucano", bo necesita recomendación. de su fuente
mas intachable podemos desear para conocer la etnologia y
el folklore mapuche que las descripciones dados por un hijo
de la misma nacion?
El documento describe varios tipos de plantas xerofitas o adaptadas a la sequía, incluyendo cactus, suculentas, nopales, visnagas y otras. Estas plantas presentan adaptaciones como espinas, hojas carnosas, almacenamiento de agua y ubicaciones en desiertos que les permiten sobrevivir con poca agua. Se mencionan varias familias botánicas como Cactaceae, Crassulaceae, Euphorbiaceae y otras que incluyen plantas suculentas.
Este documento presenta un resumen de la memoria escrita por William Yates sobre las guerras civiles argentinas de 1820 y 1821, en las que participó José Miguel Carrera. La memoria de Yates fue publicada originalmente en inglés como un apéndice en el Diario de María Graham. El texto también discute las traducciones y usos previos de la memoria de Yates por historiadores argentinos y chilenos. Finalmente, analiza la traducción al español realizada en 1888 por Luis L. Domínguez.
This unofficial student transcript summarizes Stuart James Nevin's academic record and achievement in obtaining a Master of Engineering in Mechanical Engineering from The Queen's University of Belfast. It details his course of study from 2010 to 2015, including marks obtained in modules across 6 academic years of undergraduate and postgraduate study in Mechanical and Manufacturing Engineering and Mechanical Engineering. The transcript notes that Stuart graduated with First Class Honours and was awarded his Master's degree in June 2015.
This document is a diploma supplement for Matiss Zarins from Business Academy Aarhus. It provides details about his completed Automotive Technology program, including information about the courses and exams taken between the 1st and 4th terms, an internship completed at SIAdomenikks in Riga, Latvia, and a final project on lean work environments. The supplement also describes the program's structure, level, length, requirements, grading scheme, and access to further study opportunities.
The document discusses accreditation in engineering education. It outlines the three steps in developing as an engineering professional: 1) obtaining an accredited educational qualification, 2) gaining professional registration after formative development, and 3) qualifying for an international register. International agreements like the Washington, Sydney, and Dublin Accords provide mutual recognition of accredited qualifications between countries. The Federation of Engineering Institutions of Asia and the Pacific (FEIAP) works to raise engineering education standards across Asia and the Pacific through guidelines. Accreditation helps ensure continuous improvement in education quality and developing skilled human resources for countries.
This document is an official transcript from the University of Bradford confirming that Ali Masood completed a Bachelor of Engineering in Electrical and Electronic Engineering with First Class Honours from Namal College. It details his personal information, qualification details, module results and credits over several levels, and certification from the Academic Registrar. The transcript explains the University's regulations regarding modules, credits, progression requirements, and award classifications.
This document provides a summary of Charles C. Uwakwe's qualifications and experience. He has a Master's degree in Computer Security and over 5 GWO certifications. He has experience working in rope access, rigging, security, and facilities maintenance. He is seeking new opportunities that make use of his computer skills, certifications, and willingness to travel for work.
Gopalakrishnan S is applying for an engineer position in aerospace and aircraft manufacturing. He has over 6 years of experience working in machining processes and aerospace manufacturing. He has skills in production planning, process setup and control, supplier relationship management, and ensuring compliance with quality standards like AS9100 and NADCAP. Gopalakrishnan is interested in the position due to the company's reputation and the opportunity to contribute to the growing field of aircraft manufacturing using his expertise.
Muhammad Shahbaz is a mechanical engineer with over 4 years of experience in the upstream oil and gas industry. He has worked as a mechanical engineer for Pipelink Construction Pvt. Limited since 2014 and as a QC engineer for Marathon Construction Company from 2012 to 2014. His responsibilities have included supervising piping and pipeline fabrication and installation, ensuring safety compliance, and documenting and handing over projects to clients.
This document provides information on the Diploma in Mechanical Engineering program offered by INTEC College. The 240-credit program takes 24 months to complete and covers topics like mechanical engineering, mechanics, mathematics, production planning and control, materials testing, and communication. Successful graduates will have the skills and knowledge to engage in more advanced mechanical engineering studies or related careers. Students are assessed through formative, summative, and project assignments and must pass the final integrated assessments to receive the Diploma in Mechanical Engineering.
This document summarizes fuel consumption and emissions tests of the HydraGenTM technology from Dynacert conducted by FPInnovations PIT Group. Two international tractor-trailer combinations were tested - a test vehicle equipped with HydraGenTM and a baseline control vehicle. Fuel consumption was measured by weighing portable fuel tanks before and after repeated 100km test runs. Emissions of CO, CO2, NOx and THC were also measured from the test vehicle using a portable emissions measurement system. Test results showed reductions in fuel consumption and emissions when the test vehicle was operated with HydraGenTM compared to the baseline vehicle without the technology.
The document is a cover letter and resume submitted by Linu Salam for a position as an HSE Officer. Linu has over 7 years of experience in HSE and safety roles. He currently works as an HSE Officer for Drake & Scull International in Qatar and has previous experience as a Safety Officer and in airport operations roles. Linu has several safety and technical certifications and seeks to leverage his qualifications and experience for a new position.
The document provides information about the Level 6 Graduate Diploma in Engineering offered by City & Guilds, including the qualification structure, assessment methods, and units. Learners must complete core units in their chosen pathway plus optional units. The pathways include civil, electrical, electronic and telecommunications, information technology, and mechanical engineering. Successful completion qualifies learners for registration as an Incorporated Engineer with some professional bodies.
There is high demand for oil and gas safety engineers in India and abroad due to limited training programs. National Safety Academy offers a one-year diploma in oil and gas safety engineering to train professionals for jobs as safety officers, fire officers, and fire engineers. The academy has placement success due to recruiting by organizations in India and globally, and graduates are employed around the world in the safety field.
1) The document discusses technical and vocational education in Bangladesh, outlining certificates, diplomas, and degrees offered as well as enrollment numbers and expenditures.
2) It highlights challenges including quality assurance, accountability, governance, and sustainability issues.
3) The government of Bangladesh is working to improve TVET through updating curricula, increasing monitoring, strengthening industry partnerships, and developing teachers' skills.
The document provides details on an individual's qualifications and experience for the position of E&I Q.C. Inspector. It includes personal information, education history with a Bachelor's degree in Electrical Engineering, over 17 years of experience in various roles and locations, areas of expertise, and descriptions of past roles performing quality control inspections and ensuring compliance with standards and specifications on engineering projects in countries like the UAE, Qatar, Saudi Arabia, Indonesia, and the Philippines.
03_Field HSE Mgr. - Jemmy V. Talatagod (Updated 2016.03.08Jemmy Talatagod
This resume is for Jemmy V. Talatagod, who is applying for the position of Field EHSS Manager. The candidate has over 20 years of experience in their current role and 6 years and 3 months of experience in the proposed position. They are currently employed as the Field HSE Manager for JGC Gulf International Co. Ltd. in Jubail, Saudi Arabia. The candidate's experience includes roles as an HSE Superintendent/Directorate HSE Advisor and Safety Supervisor and Officer for various companies in Saudi Arabia and the Philippines. They hold numerous safety certifications and have a background in Chemical Engineering and Biblical Studies.
This document provides information about competency standards and certification levels in technical vocational education and training (TVET) in the Philippines. It defines key terms like competency standards, basic and common units of competency, and describes the four certification levels (NC I to NC IV). It also outlines sample curricula for TVET specializations in arts and trades, agriculture, and fishery for the K to 12 program. Timetables for automotive and motorcycle servicing courses are included.
This document is an official transcript for Tay Kok Hua that shows he was conferred an Advanced Certificate in Training and Assessment on January 6, 2016 by the Institute for Adult Learning. The transcript lists the six competency units he completed along with the assessment dates and results, showing he was competent in all units. The transcript includes information about the Singapore Workforce Skills Qualifications System and explanations of grades.
Mohamed ElBorgi has successfully completed a RigPass safety orientation and training course from R300843t*A:-IJEl]JF|?Ctl\I tn3g. The course was instructor-led, took place in IRAQ, and was completed on 03 FEB 2015. RigPass is IADC's accreditation program for safety courses designed to enhance worker safety and environmental protection in the land and offshore drilling industries.
This document provides information about an Advanced Diploma of Mechanical Engineering Technology program offered by EIT. The 18-month program focuses on practical skills through online webinars, simulations, and self-study assignments. It covers topics like fundamentals of mechanical engineering, applications, energy systems, industrial automation, and management. The program aims to provide in-demand skills for mechanical technicians, engineers, and others in related fields.
CHAMP Year 1 Outcomes Leadership Committee December 5 2014cccschamp
The document summarizes the first year progress of the CHAMP workforce development program across multiple Colorado community colleges. It outlines programs ready for enrollment, courses delivered, equipment purchased, and funding spent. Overall, it found that while progress was made in developing programs and purchasing equipment, more work remains to be done to meet initial targets across the colleges during the first year of the program.
Similar to Record of Achievement [ NZQA ] BrendanMcCown (20)
CHAMP Year 1 Outcomes Leadership Committee December 5 2014
Record of Achievement [ NZQA ] BrendanMcCown
1. 4/29/2016 Record of Achievement [ NZQA ]
https://secure.nzqa.govt.nz/forproviders/tertiary/rol/results.do?rolId=1062359&print=true 1/4
Vocational Pathways details
Record of Achievement
McCown, Brendan David
National Student Number (NSN): 1062359
This information is provided for use by the providers and learners. It is not an official transcript.
Qualification and Achievement Summary
New Zealand Qualifications Framework Registered Qualifications
National Certificate in Aeronautical Engineering, Aircraft Powerplant 10 April 2013
National Certificate in Aeronautical Engineering, Aircraft Mechanical 20 March 2012
National Certificate in Aeronautical Engineering, Aircraft Structures 15 December 2011
National Certificate in Aeronautical Engineering (Related Technology) 19 November 2010
Standards Achieved
To display this report sorted by Standard number click the link in the heading.
Subfield
Standard
Number
Title CreditsResultDate
Aeronautical Engineering
Level 6 20902
Apply knowledge of avionics to the certification of aeronautical
maintenance
25 A
11 January
2016
20896
Apply knowledge of aircraft materials to the certification of
aeronautical maintenance
25 A
11 January
2016
20904
Apply knowledge of air law to the certification of aeronautical
maintenance
25 A
4
November
2015
21060
Apply knowledge of human factors to the certification of
aeronautical maintenance
20 A
4
November
2015
20901
Apply knowledge of turbine engines to the certification of
aeronautical maintenance
25 A
4
November
2015
20897
Apply knowledge of basic aeroplanes to the certification of
aeronautical maintenance
20 A
12
December
2014
20895
Apply knowledge of aircraft engineering to the certification of
aeronautical maintenance
20 A
12
December
2014
20898
Apply knowledge of pressurised aeroplanes to the certification of
aeronautical maintenance
25 A
12
December
2014
26964
Apply knowledge of electrical fundamentals to the certification of
aeronautical maintenance
20 A
12
December
2014
Level 4 3407 Maintain aircraft fire protection systems 4 A
18
September
2012
2. 4/29/2016 Record of Achievement [ NZQA ]
https://secure.nzqa.govt.nz/forproviders/tertiary/rol/results.do?rolId=1062359&print=true 2/4
2012
3405 Maintain aircraft engine fuel systems 8 A
17
September
2012
3406 Maintain aircraft engine lubrication systems 4 A
25 July
2012
3408 Maintain aircraft gearboxes and/or transmissions 15 A
24 July
2012
3920 Maintain aircraft fuel storage and distribution systems 12 A
1 June
2012
3403 Inspect aircraft engines 6 A
20 March
2012
3921 Maintain aircraft landing gear systems 12 A
28
February
2012
3413 Maintain aircraft gas turbine powerplants 20 A
28
February
2012
3922 Maintain aircraft hydraulic systems 12 A
3 February
2012
3412 Maintain aircraft gas turbine engine thrust reverser systems 4 A
3 February
2012
3919 Maintain aircraft mechanical flight control systems 12 A
9
December
2011
3918 Maintain aircraft air conditioning and pressurisation systems 12 A
9
December
2011
4070 Shape aeronautical sheet metals by cutting 5 A
12
September
2011
4023
Fabricate and repair composite aeronautical components at room
temperature
40 A
27 May
2011
4075 Repair and/or modify aircraft metal structure 15 A
3 March
2011
4003 Fabricate and/or repair aircraft carpets 8 A
26 April
2010
4072 Fold aeronautical sheet metal 3 A
16
December
2009
4074 Visually inspect aircraft metal and composite structures 5 A
2
November
2009
Level 3 3911 Replenish aircraft hydraulic systems 2 A
7
December
2012
3908 Replenish aircraft undercarriage oleos (shock struts) 2 A
7
December
2012
4033 Form aeronautical sheet metals by rolling 3 A
3 March
2011
4081 Form aeronautical sheet metals by shrinking and stretching 8 A
3 March
2011
3. 4/29/2016 Record of Achievement [ NZQA ]
https://secure.nzqa.govt.nz/forproviders/tertiary/rol/results.do?rolId=1062359&print=true 3/4
3896
Select, use, and maintain aeronautical engineering tools and
equipment
10 A
16
December
2009
7241
Demonstrate knowledge of aircraft powerplant maintenance
practices
6 A
19
November
2009
7240
Demonstrate knowledge of aircraft powerplant repair and
overhaul practices
6 A
19
November
2009
3895 Apply aeronautical engineering maintenance practices 20 A
2
November
2009
3906 Service fixed wing aircraft 4 A
23
September
2009
3907 Carry out aircraft ground handling 4 A
23
September
2009
3894 Use aeronautical industry publications and documentation 6 A
16
September
2009
7244
Demonstrate knowledge of electrical and electronic applications
to aircraft mechanical systems
11 A
18 August
2009
7243
Demonstrate knowledge of aircraft mechanical system
maintenance practices
12 A
29 July
2009
7242
Demonstrate knowledge of aircraft mechanical component repair
and overhaul practices
8 A
29 July
2009
Level 2 5428
Demonstrate knowledge of aircraft construction and maintenance
practices
14 A
19
November
2009
Core Generic
Level 2 4252 Produce a targeted resume 2 A
2 August
2009
7117 Produce a plan to enhance own learning 2 A
5 March
2009
Level 1 504 Produce a CV (curriculum vitae) 2 A
2 August
2009
4249 Demonstrate care and timeliness as an employee 3 A
5 March
2009
Food and Related Products Processing
Level 2 7756
Handle chemicals safely in food and related product production
environments
2 A
21 May
2003
Health Studies
Level 3 6400 Manage first aid in emergency situations 2 A
12 March
2009
Level 2 6401 Provide first aid 1 A
12 March
2009
Level 1 6402 Provide resuscitation level 2 1 A
12 March
2009
Mechanical Engineering
Level 2 4435
Select, use, and care for engineering dimensional measuring
equipment 3 A
17
September
2009
4. 4/29/2016 Record of Achievement [ NZQA ]
https://secure.nzqa.govt.nz/forproviders/tertiary/rol/results.do?rolId=1062359&print=true 4/4
2009
2395 Select, use and care for, engineering hand tools 4 A
16
September
2009
21912 Apply safe working practices on an engineering worksite 2 A
14 May
2009
4432
Demonstrate knowledge of, and convert, units of measure used
in engineering
2 A
10 March
2009
21911 Demonstrate knowledge of safety on engineering worksites 1 A
2 March
2009
Level 1 4433
Select, use, and care for simple measuring devices used in
engineering
2 A
17
September
2009
Return to normal version of these results.