Rahul Takyar is seeking a challenging position utilizing his skills as a junior draughtsman. He has over 2 years of experience in mechanical drafting for industrial plants including power, oil and gas. His experience includes preparing piping and instrumentation diagrams, general arrangement drawings, fabrication drawings, and structural designs. He has a technical diploma in mechanical drafting and is proficient in AutoCAD, Microstation, and ERP systems.
I have 2 years' experience in shobra co. for engineering industries and I work now as production engineer for Bedaya co. for stationary products. I have PMP preparation course and six-sigma course. I am good in AutoCAD and solid works engineering graphics. I am very good in English and fair in German
1. PROJECTS EXECUTED: OIL & GAS AS WELL AS BUILDING CONSTRUCTION PROJECTS ( AS A SUPERVISOR CIVIL)
1- Acting as a link between Civil Engineers and the Foreman & charge hand.
2- Execution of storm water trench, hot oil trench, electrical trench, post padding by sand for all pipelines, grade slab, paving, shim plate installation, anchor bolt installation in various foundations, pedestal casting and installation,
Manhole casting and installation, grouting of vessels and sewer pipe, fencing foundation casting and its installation.
3- Conducting Tool Box Talk on everyday basis on starting work Activity at site.
4- I can take permit of any work as per client specified specification and requirements.
5- I can execute any work in safe and in well-disciplined manners to give better output towards to achieve organization goals.
6- I can also execute more than 5 activities at a time on site by providing better output.
7- Assisting the site Foreman and charge hand in all site civil construction activities from foundation up to final finishing stage 8- Supervising all construction activities and providing technical inputs for construction and coordination with the site management.
9- Anchoring on-site construction activities to ensure completion of project within the time and cost parameters and effective resource utilization to maximize the output.
10- Checking the physical and chemical composition of materials such as concrete, brick, Block, Cement, aggregates (fine as well as coarse), Steel and plywood.
11- Calculation of materials for construction works at site.
12- Giving detailed notes on daily progress report to me superior about every day work.
13- Preparation of BBS, Supervision and Execution of Entire Civil works like Excavation, Backfilling, Compaction, Surface protection, Form work, Rebar work, Concreting Masonry work, Block work, plastering, Water proofing work Painting, Plumbing, Tiling and Flooring work.
• Well pad development and installation of foundation for pipelines.
I have 2 years' experience in shobra co. for engineering industries and I work now as production engineer for Bedaya co. for stationary products. I have PMP preparation course and six-sigma course. I am good in AutoCAD and solid works engineering graphics. I am very good in English and fair in German
1. PROJECTS EXECUTED: OIL & GAS AS WELL AS BUILDING CONSTRUCTION PROJECTS ( AS A SUPERVISOR CIVIL)
1- Acting as a link between Civil Engineers and the Foreman & charge hand.
2- Execution of storm water trench, hot oil trench, electrical trench, post padding by sand for all pipelines, grade slab, paving, shim plate installation, anchor bolt installation in various foundations, pedestal casting and installation,
Manhole casting and installation, grouting of vessels and sewer pipe, fencing foundation casting and its installation.
3- Conducting Tool Box Talk on everyday basis on starting work Activity at site.
4- I can take permit of any work as per client specified specification and requirements.
5- I can execute any work in safe and in well-disciplined manners to give better output towards to achieve organization goals.
6- I can also execute more than 5 activities at a time on site by providing better output.
7- Assisting the site Foreman and charge hand in all site civil construction activities from foundation up to final finishing stage 8- Supervising all construction activities and providing technical inputs for construction and coordination with the site management.
9- Anchoring on-site construction activities to ensure completion of project within the time and cost parameters and effective resource utilization to maximize the output.
10- Checking the physical and chemical composition of materials such as concrete, brick, Block, Cement, aggregates (fine as well as coarse), Steel and plywood.
11- Calculation of materials for construction works at site.
12- Giving detailed notes on daily progress report to me superior about every day work.
13- Preparation of BBS, Supervision and Execution of Entire Civil works like Excavation, Backfilling, Compaction, Surface protection, Form work, Rebar work, Concreting Masonry work, Block work, plastering, Water proofing work Painting, Plumbing, Tiling and Flooring work.
• Well pad development and installation of foundation for pipelines.
1. CURRICULUM VITAE
RAHUL TAKYAR 108, KNO.-842/217, ST NO.-09
(Mob: 9650567478) Saboli Extn.,Shahadara
E-mail- rahultakyar@ymail.com Delhi-110093
AIMS/OBJECTS :-
A challenging position that will allow me to utilize my skills.
To Work for a professionally managed company and to add value to the organization.
To develop my skills and abilities through handsome experience and learning for the best.
PROFESSIONAL EXPERIENCES :-
1. Currently working as a Jr. Draughtsman (Mech.) in M/s ISGEC Heavy
Engineering Ltd., Noida from March. 2010 to till date.
2. Worked with M/s Techno Instrumentation Pvt Ltd. as a ‘Jr. Draughtsman” from
Aug’09 to March’10.
COMPANY PROFILE :-
ISGEC Heavy Engineering Ltd., Noida leading in Industrial boilers and complete
sugar plant & equipments on turnkey basis. This unit is an ISO 9001 company in designing,
manufacturing, erection & commissioning of Industrial boilers & sugar plant.
JOB PROFILE :-
a.) Preparation of General Arrangement Drawings.
b.) Preparation of P&I Diagram as per specification given by client for
Power, Chemical plants, etc.
c.) Fabrication drawing of Feed Water Storage Tank, Deaerator, Manway
and General Arrangement Drawing, etc.
d.) Preparation of all types of structural drawings for Vessels.
e.) Having 1.5 years of Experience in Onshore projects in the field of
Oil and Gas,
Designation – Jr. Draughtsman
Job Responsibilities –
Foundations & Layouts: -
a.) Preparing plant layouts as per specification.
b.) Preparing structural G. A. and detail drawings.
2. c.) Preparing foundation drawing of all equipments.
Piping :-
f.) Preparing P&I Diagram as per specification for all over the plant.
g.) Preparing the layout of Process piping, Steam piping, Water piping etc…
Process house :-
a.) Preparing G. A. & Detail drawings of Evaporators, Juice heaters,
Syrup Sulphitor , Tanks, and other equipments Used in process house.
.b.) All types of fabrication drawing of all over plant.
Structure -
Preparing structural G. A. and detail drawings for all over plant.
QUALIFICATION
Academic :-
Passed 10th
From CBSE Board 2005
Passed 12th
From CBSE Board 2007
Technical :-
Passed I.T.I. in Draughtsman (Mech) from Nizamuddin securing 75.0% marks from 2007-
2009.
COMPUTER KNOWLEDGE
Auto CAD-2004,2006,2007, 2008, 2010.
MICROSTATION V8i, V8.
Basic knowledge of SP 3D.
MS Office 2003,2007
Good Knowledge for the Enterprise Resource Planning (BaaN).
Good Knowledge in Data Management of PLM.
PERSONAL DETAILS
Father’s Name : Late.Sh. Avinash kumar
Date of Birth : 25 March, 1989
Marital Status : Married
Permanent Address : 108, KNO.-842/217, ST NO.-09
Saboli Extn.
Shahdara, Delhi-110094
Place :
Date : (RAHUL TAKYAR)