The document describes several grease and lubricant products for industrial applications. It introduces TS-115 Corrosion Control Grease which resists corrosion from salt water, acids, or chemicals and has a high melting point over 500 degrees F. It also mentions TS-65 Multi Purpose Moly Grease for heavy duty uses like wheel bearings and chassis that withstands high temperatures. Finally, it outlines TS-209-0 O.G.L. Outside Gear Lubricant designed for heavily loaded slow moving gears that is resistant to water wash-out.

1. TS-115 Corrosion Control Grease TS-115 Corrosion Control Grease is a multipurpose, high temperature bearing and machinery grease for industrial applications where salt water, acid vapors, or chemicals cause corrosion. It has a high melting point, over 500 degrees F, and resists water washout. TS-65 Multi Purpose Moly Grease TS-65 M.P. Moly Grease is a multipurpose, semi-synthetic inorganic wheel bearing and chassis grease with moly. It is water insoluble and withstands high temperatures. TS-65 is an extreme pressure grease making it suitable for heavy duty industrial uses.

2. TS-209-0 O.G.L. Outside Gear Lubricant TS-209-0 O.G.L. Outside Gear Lubricant is an inorganic thickened, heavy duty, extreme pressure grease designed for spur and bull or rack and pinion gears with heavily loaded slow moving gears. Resistant to water wash-out. TS-210 EP open gear grease TS-210 SeaSafe(TM) Leg Dope and Cable Lube is an EP open gear grease that has passed for use in environmentally-sensitive waters, such as the Gulf of Mexico. It has excellent extreme pressure performance. TS-210 is environmentally and hygienically safe, but not biodegradable.

3. TS-70 Moly Paste TS-70 Moly Paste is a thread compound with 70% molybdenum disulfide, and is especially suitable for wet or corrosive conditions, including subsea applications. It has highly consistent torque values for makeup and breakout. TS-90 Mud Pump Additive TS-90 Moly Gear Concentrate is an additive for all types of gear oils to lower friction and to improve the film-forming abilities of the oil. It should be added to gear oils at a ratio mixture of 1:9