This document discusses key performance indicators (KPIs) for a product assistant position. It provides information on developing KPIs, including identifying key result areas, tasks, and methods for measuring results. The document recommends keeping the number of KPIs limited to 3-5, ensuring they are clearly linked to strategy and goals. Different types of KPIs are outlined such as leading indicators, lagging indicators, and qualitative vs. quantitative measures. Steps are provided for creating a KPI system tailored for a product assistant role.
Wirelessmobilechargingthroughmicrowaves2 r aviRavi Kumar
Â
WIRELESS CHARGING
INTRODUCTION  Always the recharging of mobile phone batteries has always been a problem for us.  This problem will be solved after our proposal………!!!!!!!!  In this paper a new proposal has been made so as to make the recharging of the mobile phones is done automatically as you talk in your mobile phone!
3.  The microwave signal is transmitted from the transmitter along with the message signal using special kind of antennas called slotted wave guide antenna at a frequency is 2.45 GHz  Thus the more you talk, the more is your mobile phone charged!!!!!!! This is new isn’t?!!
4. What Is Microwaves????? ï‚— Microwaves are good for transmitting information from one place to another because microwave energy can penetrate haze, light rain and snow, clouds, and smoke. ï‚— Shorter microwaves are used in remote sensing. ï‚— These microwaves are used for radar like the Doppler radar used in weather forecasts
5. Microwaves > Frequency Range: 3GHZ to 300GHZ > Remort Sensing. > Communication Industry. >2.45GHZ ISM Band.
6. TRANSMITTER DESIGN  The MAGNETRON is a self-contained microwave oscillator that operates differently from the linearbeam tubes, such as the TWT and the klystron.  ——Magnetron is used to produce high-power output required in radar and communications equipment  —Microwaves used in mobile communication are also produced by similar Oscillators
7. Magnetron - Construction
8. PRINCIPLE OF OPERATION
9. WHAT’S RECTANNAE??? What’s rectannae you are confused…….it’s nothing but the combination of rectifier and antenna. Antenna is to receive the microwave signal and it just feed the signal to rectifier . Rectifier is to convert the AC signal to PULSATING DC signal.
10. RECEIVER DESIGN ï‚— The basic addition to the mobile phone is going to be the rectenna. ï‚— A rectenna is a rectifying antenna, a special type of antenna that is used to directly convert microwave energy into DC electricity.
11. ADVANTAGES ï‚— Use of separate chargers is eliminated. ï‚— Electricity is saved ï‚— The phone can be charged anywhere anytime. ï‚— Wireless energy transfer can potentially recharge the mobile phones without chords. ï‚— Only one microwave transmitter can serve to all the service providers in that area. ï‚— The need of different types of chargers by different manufacturers is totally eliminated.
12. DISADVANTAGES ï‚— The transmitter and receiver also should be very powerful devices as the distance increases. ï‚— Slower Charging. ï‚— Wireless transmission of the energy causes some drastic effects to human body, because of its radiation. ï‚— More costly.
Wirelessmobilechargingthroughmicrowaves2 r aviRavi Kumar
Â
WIRELESS CHARGING
INTRODUCTION  Always the recharging of mobile phone batteries has always been a problem for us.  This problem will be solved after our proposal………!!!!!!!!  In this paper a new proposal has been made so as to make the recharging of the mobile phones is done automatically as you talk in your mobile phone!
3.  The microwave signal is transmitted from the transmitter along with the message signal using special kind of antennas called slotted wave guide antenna at a frequency is 2.45 GHz  Thus the more you talk, the more is your mobile phone charged!!!!!!! This is new isn’t?!!
4. What Is Microwaves????? ï‚— Microwaves are good for transmitting information from one place to another because microwave energy can penetrate haze, light rain and snow, clouds, and smoke. ï‚— Shorter microwaves are used in remote sensing. ï‚— These microwaves are used for radar like the Doppler radar used in weather forecasts
5. Microwaves > Frequency Range: 3GHZ to 300GHZ > Remort Sensing. > Communication Industry. >2.45GHZ ISM Band.
6. TRANSMITTER DESIGN  The MAGNETRON is a self-contained microwave oscillator that operates differently from the linearbeam tubes, such as the TWT and the klystron.  ——Magnetron is used to produce high-power output required in radar and communications equipment  —Microwaves used in mobile communication are also produced by similar Oscillators
7. Magnetron - Construction
8. PRINCIPLE OF OPERATION
9. WHAT’S RECTANNAE??? What’s rectannae you are confused…….it’s nothing but the combination of rectifier and antenna. Antenna is to receive the microwave signal and it just feed the signal to rectifier . Rectifier is to convert the AC signal to PULSATING DC signal.
10. RECEIVER DESIGN ï‚— The basic addition to the mobile phone is going to be the rectenna. ï‚— A rectenna is a rectifying antenna, a special type of antenna that is used to directly convert microwave energy into DC electricity.
11. ADVANTAGES ï‚— Use of separate chargers is eliminated. ï‚— Electricity is saved ï‚— The phone can be charged anywhere anytime. ï‚— Wireless energy transfer can potentially recharge the mobile phones without chords. ï‚— Only one microwave transmitter can serve to all the service providers in that area. ï‚— The need of different types of chargers by different manufacturers is totally eliminated.
12. DISADVANTAGES ï‚— The transmitter and receiver also should be very powerful devices as the distance increases. ï‚— Slower Charging. ï‚— Wireless transmission of the energy causes some drastic effects to human body, because of its radiation. ï‚— More costly.
Taxation, Non-Tax Revenue and Accountability: New Evidence Using New Cross-Country Data.
Resource curse, i.e. the theory stating that natural resource-rich countries that heavily rely on resource revenues are more likely to develop autocratic or dictatorial regimes, has been vastly investigated in the literature.
However, although there exists numerous numbers of cross-country studies of the political resource curse, conflicting results and inconsistencies continue to emerge after more than a decade. These inconsistencies can be attributed to imprecise indicators and poor data quality, inconsistent estimation methods, and failure at distinguishing alternative causal processes, linked to tax and non-tax revenue.
The main innovation of this paper is the use of the ICTD GRD to re-investigate the relationship between government revenues and democracy. Indeed, this new dataset allows for a clear decomposition of government revenue into tax and non-tax revenue, the latter being mainly composed of natural resource revenues. Then, multiple econometric estimation methods are employed to ensure better robustness of the results (including GMM, Mean-Group, Random and Fixed-Effect, and Logit Error Correction Model). Finally, a whole set of robustness checks are run with the inclusion of longer lags on the revenue variables, alternative measures of democracy and different time periods among others.
The authors find stronger evidence of the resource curse than previous studies as the impact of either tax reliance or non-tax revenue on democracy is negative and significant in all the specifications and methods.
The relationship between tax and democracy is more ambiguous, sometimes positive but most often insignificant. This may reflect a greater complexity of causal processes between those two variables. An important finding is that this relationship happens to operate over the long term, i.e. results are stronger with estimators that focus on longer-term changes in composition of government revenue, rather than short-term variation. Finally, the paper has been made easy to be replicated in order to allow for future comparisons using the ICTD GRD.
1. product assistant KPI
In this ppt file, you can ref KPI materials for product assistant position such as
product assistant list of KPIs, performance appraisal, job skills, KRAs, BSC…
If you need more KPI materials for product assistant,
please visit: kpi123.com/list-of-kpi-samples
Other materials from kpi123.com
• Top 28 performance appraisal forms
• 11 performance appraisal methods
• 1125 performance review phrases
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
Interview questions and answers – free download/ pdf and ppt file
2. Steps to create KPIs of product assistant
1. To build KPI system for this position, you can
follow the steps below:
2. Define operational objectives for Construction
technician monthly, quarterly, 6 months, yearly.
3. Identify Key Result Areas for the Construction
technician.
4. Identify tasks list.
5. Determine work procedure for each KRA, each
task.
6. Identify methods to measure the results of each
KRA, task, procedure.
7. Create Construction technician KPIs
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
Interview questions and answers – free download/ pdf and ppt file
3. Mistakes in creating product assistant KPIs
Building KPI system plays an important role in
evaluating job performance of individual parts,
divisions and the company’s objectives and
performance management system in general. The
development of KPI metrics help to create
measurement systems, information systems
throughout the organization.
1. When building KPI system, you should note the
following factors:
2. Do not create too many KPI, KPI be built around
3-5 KRAs.
3. KPI should change to suit each stage (depending
on your goals).
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
Interview questions and answers – free download/ pdf and ppt file
4. How to design product assistant KPIs
1. KPIs should be clearly linked to
the strategy, i.e. the things that
matter the most.
2. KPIs have to provide the answers
to our most important questions.
3. KPIs should be primarily designed
to empower employees and provide
them with the relevant information to
learn.
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
Interview questions and answers – free download/ pdf and ppt file
5. Interview questions and answers – free download/ pdf and ppt file
Types of KPIs:
1. Process KPIs - measure the efficiency or productivity of a business process. Examples -
Days to deliver an order.
2. Input KPIs - measure assets and resources invested in or used to generate business
results. Examples - Dollars spent on research and development, Funding for employee
training, Quality of raw materials.
3. Output KPIs - measure the financial and nonfinancial results of business activities.
Examples - Revenues, Number of new customers acquired.
4. Leading KPI - measure activities that have a significant effect on future performance. Drive
the performance of the outcome measure, being predictor of success or failure.
5. Lagging KPI - is a type of indicator that reflect the success or failure after an event has
been consumed. Such as most financial KPIs, measure the output of past activity.
6. Outcome KPI - Reflects overall results or impact of the business activity in terms of
generated benefits, as a quantification of performance. Examples are customer retention,
brand awareness.
7. Qualitative KPI - A descriptive characteristic, an opinion, a property or a trait.ï‚— Examples
are employee satisfaction through surveys which gives a qualitative report.
8. Quantitative KPI - A measurable characteristic, resulted by counting, adding, or averaging
numbers. Quantitative data is most common in measurement and therefore forms the
backbone of most KPIs.
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
6. Top KPI materials for product assistant
If you need more KPI materials for product
assistant,
please visit: kpi123.com/list-of-kpi-samples
Other materials from kpi123.com
•Top 28 performance appraisal forms
•11 performance appraisal methods
•1125 performance review phrases
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
Interview questions and answers – free download/ pdf and ppt file
7. Top KPI materials for product assistant
If you need more KPI materials for product
assistant,
please visit: kpi123.com/list-of-kpi-samples
Other materials from kpi123.com
•Top 28 performance appraisal forms
•11 performance appraisal methods
•1125 performance review phrases
Top materials: top sales KPIs, Top 28 performance appraisal forms, 11 performance appraisal methods
Interview questions and answers – free download/ pdf and ppt file