The document outlines 13 steps for replacing an electrical outlet, beginning with turning off the circuit breaker and verifying no voltage. It instructs removing the old outlet, disconnecting the ground, white and black wires, and attaching them to the corresponding screws on the new outlet. The final steps are installing the new outlet in the box, replacing the cover, turning the breaker back on, and verifying correct operation.

1. Welcome to this presentationWelcome to this presentation
on replacing an electricalon replacing an electrical
outletoutlet

2. Step 1Step 1
Go the electrical panel and turn off the
breaker that controls the outlet that you want
to replace.

3. Step 2Step 2
Using a test meter, verify that there is no
voltage at the outlet.

4. Step 3Step 3
Remove the electrical outlet cover.

5. Step 4Step 4
Remove the electrical outlet.

6. Step 5Step 5
Remove the first wire from the outlet.

7. Step 6Step 6
Remove the other wire from the outlet.

8. Step 7Step 7
Remove the ground wire from the outlet. All
wires are now removed from the old outlet.

9. Step 8Step 8
On the new outlet, attach the ground wire to
the green-colored screw.

10. Step 9Step 9
Attach the white wire to the silver-colored
screw on the outlet.

11. Step 10Step 10
Attach the black wire to the bronze-colored
screw on the outlet.

12. Step 11Step 11
Install the new outlet into the electrical box.

13. Step 12Step 12
Replace the electrical outlet cover.

14. Step 13Step 13
Turn on the breaker that controls the outlet
and verify correct operation.

15. Congratulations!Congratulations!
You have safely and successfully replaced
an electrical outlet.