The document provides information about Tedea-Huntleigh's Model 1430 damped load cell for rotary filling machines. It has capacities of 3 kg, 17 lbs, and 23 lbs and is constructed of stainless steel. The load cell is designed to reduce weighing errors from dynamic forces on rotary liquid filling machines and can operate at rotational speeds up to 13 rpm at a 1 meter radius. It has adjustable viscous damping for shorter settling times and faster machine cycles.
The document is a technical specification sheet for Sensortronics Model 65083H hermetically sealed stainless steel shear beam load cell. It provides details on:
- Rated capacities from 1000 to 10,000 pounds or 500kg to 5 metric tons
- Stainless steel welded seal construction providing IP68 protection
- Accuracy ratings of NTEP Class III and IIIL as well as OIML R60
- Suitable for use in harsh industrial environments like food/chemical processing
This document summarizes information about the Tedea-Huntleigh Model 1030 low profile single-point load cell. It can measure capacities from 2-15 kg and features an aluminum construction, IP65 protection, and optional hazardous area approval. It is well-suited for bench scales, counting scales, and grocery scales due to its accurate and low-cost design. The document provides specifications, dimensions, wiring diagrams, and other technical details.
The document describes Tedea-Huntleigh's Models 1040 and 1041 low capacity single-point aluminum load cells. The load cells have capacities between 5-100 kg, are made of aluminum, and have IP65 protection rating. They are designed for direct mounting on low cost weighing platforms and are well suited for use in retail, bench, and counting scales. The document provides specifications, dimensions, wiring diagrams, and other details of the load cell models.
This document summarizes the specifications and features of the Tedea-Huntleigh Model 1002 aluminum single-point load cell. Key points include:
- It has capacities from 0.5-20 kg and is suitable for small scales and grocery scales.
- The load cell is made of aluminum, has IP66 protection, and a single-point 200 x 200 mm platform.
- Optional 1000-ohm strain gages make it suitable for battery-powered equipment.
- Typical applications include packing machines, filling machines, and low-force medical applications.
The document summarizes a stainless steel, single-column compression load cell model 65114 for weighing applications such as truck scales, tanks, bins, and hoppers. It has a rated capacity of 50,000 to 100,000 pounds or 25 to 50 metric tons. The load cell features stainless steel welded seal construction, IP67 environmental protection rating, optional fully hermetic sealing, and approval for legal-for-trade applications. It is designed for use in rugged outdoor environments.
This document provides information about the Tedea-Huntleigh Model 3520 Stainless Steel Shear Beam Load Cell. It has capacities from 500-2000 kg, is constructed of stainless steel, and is sealed to IP67. It is designed for use in low profile platforms, pallet scales, tank and silo weighing, and food industry platforms. The load cell has high immunity to shock or side loading and high accuracy up to 6000 divisions. It provides a low profile design ideal for modern industrial scales.
The document provides information about the Sensortronics Model 65083 stainless steel, welded seal shear beam load cell. It summarizes the key features, applications, description, specifications, and outlines dimensions. The load cell is designed for use in hostile environments, has an IP68 environmental protection rating, and capacities ranging from 1000 to 20,000 pounds. It provides high accuracy measurement suitable for platform scales, tanks, silos, and other industrial weighing applications.
The document provides information about Tedea-Huntleigh's Model 1430 damped load cell for rotary filling machines. It has capacities of 3 kg, 17 lbs, and 23 lbs and is constructed of stainless steel. The load cell is designed to reduce weighing errors from dynamic forces on rotary liquid filling machines and can operate at rotational speeds up to 13 rpm at a 1 meter radius. It has adjustable viscous damping for shorter settling times and faster machine cycles.
The document is a technical specification sheet for Sensortronics Model 65083H hermetically sealed stainless steel shear beam load cell. It provides details on:
- Rated capacities from 1000 to 10,000 pounds or 500kg to 5 metric tons
- Stainless steel welded seal construction providing IP68 protection
- Accuracy ratings of NTEP Class III and IIIL as well as OIML R60
- Suitable for use in harsh industrial environments like food/chemical processing
This document summarizes information about the Tedea-Huntleigh Model 1030 low profile single-point load cell. It can measure capacities from 2-15 kg and features an aluminum construction, IP65 protection, and optional hazardous area approval. It is well-suited for bench scales, counting scales, and grocery scales due to its accurate and low-cost design. The document provides specifications, dimensions, wiring diagrams, and other technical details.
The document describes Tedea-Huntleigh's Models 1040 and 1041 low capacity single-point aluminum load cells. The load cells have capacities between 5-100 kg, are made of aluminum, and have IP65 protection rating. They are designed for direct mounting on low cost weighing platforms and are well suited for use in retail, bench, and counting scales. The document provides specifications, dimensions, wiring diagrams, and other details of the load cell models.
This document summarizes the specifications and features of the Tedea-Huntleigh Model 1002 aluminum single-point load cell. Key points include:
- It has capacities from 0.5-20 kg and is suitable for small scales and grocery scales.
- The load cell is made of aluminum, has IP66 protection, and a single-point 200 x 200 mm platform.
- Optional 1000-ohm strain gages make it suitable for battery-powered equipment.
- Typical applications include packing machines, filling machines, and low-force medical applications.
The document summarizes a stainless steel, single-column compression load cell model 65114 for weighing applications such as truck scales, tanks, bins, and hoppers. It has a rated capacity of 50,000 to 100,000 pounds or 25 to 50 metric tons. The load cell features stainless steel welded seal construction, IP67 environmental protection rating, optional fully hermetic sealing, and approval for legal-for-trade applications. It is designed for use in rugged outdoor environments.
This document provides information about the Tedea-Huntleigh Model 3520 Stainless Steel Shear Beam Load Cell. It has capacities from 500-2000 kg, is constructed of stainless steel, and is sealed to IP67. It is designed for use in low profile platforms, pallet scales, tank and silo weighing, and food industry platforms. The load cell has high immunity to shock or side loading and high accuracy up to 6000 divisions. It provides a low profile design ideal for modern industrial scales.
The document provides information about the Sensortronics Model 65083 stainless steel, welded seal shear beam load cell. It summarizes the key features, applications, description, specifications, and outlines dimensions. The load cell is designed for use in hostile environments, has an IP68 environmental protection rating, and capacities ranging from 1000 to 20,000 pounds. It provides high accuracy measurement suitable for platform scales, tanks, silos, and other industrial weighing applications.
This document summarizes a load cell product from Tedea-Huntleigh. It provides specifications for a stainless steel S-type load cell model 620 with capacities ranging from 500 to 5000 kg. It details the load cell's features such as stainless steel construction, IP68 sealing, and approvals. Dimensions, technical specifications, and mounting thread options are provided. The document also includes disclaimer information from Vishay Precision Group.
This document lists various types of chafing dishes, soup warmers, and other catering equipment including their sizes, capacities, and product codes. It includes round, oval, and square stainless steel chafing dishes, electric chafing dishes, glass lidded electric soup warmers, stainless steel steam boats, casserole stands, and electric water urns and boilers. Specifications such as dimensions, liters or liter capacity, packaging, and article numbers are provided for each product.
This document provides information on the Model 65040 Double-Ended Shear Beam Load Cell from Sensortronics. It is designed for use in certified truck and rail scales with capacities from 25,000 to 125,000 pounds. Key features include its center supported external pivot loading design, IP67 sealing, and intrinsic safety certification allowing use in explosive environments. It provides high accuracy measurement suitable for legal trade applications.
The document provides information about load cell mounting assemblies called CellMate. It summarizes that CellMate assemblies simplify load cell installation on vessels like tanks and silos. They are available in three models to accommodate different load cell models and capacities ranging from 5 to 5000 kg. CellMate provides protection for load cells and maintains a permanent safety system to reduce damage. It has features like stainless steel construction, internal jacking for easy load cell installation and replacement, and cable protection.
This document lists specifications for various leveling feet, including the part number, item number, description, maximum force, and effective date. Specifically, it provides details on 13 different leveling feet, identifying their type (B-type, EX B-type, S-type), sizing standard (metric or imperial), thread size, intended application (coarse or fine), and maximum supported force. The effective date for all listed leveling feet is October 13, 2014.
This document provides information on the Tedea-Huntleigh Model 1260 aluminum high capacity single-point load cell. It has capacities from 50-635 kg, is constructed of aluminum, and has an IP66 rating. It is designed for direct mounting of large platforms for use in applications such as large platform scales, hanging scales, and check weighing. The document provides details on specifications, dimensions, wiring, and approval ratings.
The document describes the Tedea-Huntleigh Model 250 load cell, which is used in elevators for safety, traffic control, and energy saving purposes. It is a low-profile, pancake-type load cell with a built-in amplifier that is commonly placed between the inner and outer elevator cages. The load cell senses the weight in the elevator and transmits this information to the control system. It is used as an overload sensor for safety, to determine which elevator to send for traffic control, and to provide information to energy saving algorithms in the control system.
This document provides specifications for the Tedea-Huntleigh Model 327 compact tension/compression load cell. It can measure up to 550 lbs in tension or compression. It is constructed of anodized aluminum and has an IP65 rating. It is suitable for small scale applications where minimal installation height is required such as hanging scales or general force measurement. Dimensions and specifications are provided, along with wiring diagrams.
This document provides information on the Tedea-Huntleigh Model 1330 aluminum single-point load cell. It can measure loads between 500-1000 kg and features an IP66-rated aluminum construction. It is designed to directly mount weighing platforms up to 800 x 800 mm for uses such as floor scales, hanging scales, and check weighing. The document provides specifications, dimensions, wiring diagrams, and other technical details.
2008 Plastic Packaging in the Beverage MarketDean Bellefleur
This document provides a summary of the global market for consumer packaging and plastic packaging and blow moulding processes. It discusses:
1) The global market for consumer packaging in 2006 was worth close to $400 billion and is estimated to grow to over $470 billion by 2010.
2) Plastic blow moulding processes like stretch blow moulding and extrusion blow moulding are commonly used to produce plastic bottles for beverages.
3) The document outlines opportunities in developing compostable plastics like PLA and addressing public health concerns around Bisphenol A in plastic packaging.
This document summarizes a load cell product from Tedea-Huntleigh. It provides specifications for a stainless steel S-type load cell model 620 with capacities ranging from 500 to 5000 kg. It details the load cell's features such as stainless steel construction, IP68 sealing, and approvals. Dimensions, technical specifications, and mounting thread options are provided. The document also includes disclaimer information from Vishay Precision Group.
This document lists various types of chafing dishes, soup warmers, and other catering equipment including their sizes, capacities, and product codes. It includes round, oval, and square stainless steel chafing dishes, electric chafing dishes, glass lidded electric soup warmers, stainless steel steam boats, casserole stands, and electric water urns and boilers. Specifications such as dimensions, liters or liter capacity, packaging, and article numbers are provided for each product.
This document provides information on the Model 65040 Double-Ended Shear Beam Load Cell from Sensortronics. It is designed for use in certified truck and rail scales with capacities from 25,000 to 125,000 pounds. Key features include its center supported external pivot loading design, IP67 sealing, and intrinsic safety certification allowing use in explosive environments. It provides high accuracy measurement suitable for legal trade applications.
The document provides information about load cell mounting assemblies called CellMate. It summarizes that CellMate assemblies simplify load cell installation on vessels like tanks and silos. They are available in three models to accommodate different load cell models and capacities ranging from 5 to 5000 kg. CellMate provides protection for load cells and maintains a permanent safety system to reduce damage. It has features like stainless steel construction, internal jacking for easy load cell installation and replacement, and cable protection.
This document lists specifications for various leveling feet, including the part number, item number, description, maximum force, and effective date. Specifically, it provides details on 13 different leveling feet, identifying their type (B-type, EX B-type, S-type), sizing standard (metric or imperial), thread size, intended application (coarse or fine), and maximum supported force. The effective date for all listed leveling feet is October 13, 2014.
This document provides information on the Tedea-Huntleigh Model 1260 aluminum high capacity single-point load cell. It has capacities from 50-635 kg, is constructed of aluminum, and has an IP66 rating. It is designed for direct mounting of large platforms for use in applications such as large platform scales, hanging scales, and check weighing. The document provides details on specifications, dimensions, wiring, and approval ratings.
The document describes the Tedea-Huntleigh Model 250 load cell, which is used in elevators for safety, traffic control, and energy saving purposes. It is a low-profile, pancake-type load cell with a built-in amplifier that is commonly placed between the inner and outer elevator cages. The load cell senses the weight in the elevator and transmits this information to the control system. It is used as an overload sensor for safety, to determine which elevator to send for traffic control, and to provide information to energy saving algorithms in the control system.
This document provides specifications for the Tedea-Huntleigh Model 327 compact tension/compression load cell. It can measure up to 550 lbs in tension or compression. It is constructed of anodized aluminum and has an IP65 rating. It is suitable for small scale applications where minimal installation height is required such as hanging scales or general force measurement. Dimensions and specifications are provided, along with wiring diagrams.
This document provides information on the Tedea-Huntleigh Model 1330 aluminum single-point load cell. It can measure loads between 500-1000 kg and features an IP66-rated aluminum construction. It is designed to directly mount weighing platforms up to 800 x 800 mm for uses such as floor scales, hanging scales, and check weighing. The document provides specifications, dimensions, wiring diagrams, and other technical details.
2008 Plastic Packaging in the Beverage MarketDean Bellefleur
This document provides a summary of the global market for consumer packaging and plastic packaging and blow moulding processes. It discusses:
1) The global market for consumer packaging in 2006 was worth close to $400 billion and is estimated to grow to over $470 billion by 2010.
2) Plastic blow moulding processes like stretch blow moulding and extrusion blow moulding are commonly used to produce plastic bottles for beverages.
3) The document outlines opportunities in developing compostable plastics like PLA and addressing public health concerns around Bisphenol A in plastic packaging.
1. PLASTIC HI-BALL
透明玉晶杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
400 (14) 12 / 96 AS-1034
EFFECTIVE FROM:19032010
PLASTIC LONG DRINK
透明12角杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
400 (14) 12 / 144 AS-1049
PLASTIC LONG DRINK
透明正棱杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
144 (12) 12 / 342 AS-1050
PLASTIC LONG DRINK
透明香密水杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
400 (14) 12 / 96 AS-1027
2. PLASTIC LONG DRINK
透明王子冷水杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
484.5 (17) 12 / 96 AS-1021
EFFECTIVE FROM:28072010
PLASTIC LONG DRINK
透明太空杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
541.5 (19) 12 / 96 AS-1017
PLASTIC LONG DRINK
透明香槟杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
242.25 (8.5) 12 / 96 AS-1029
PLASTIC LONG DRINK
透明水杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
400 (14) 12 / 144 AS-1067
3. TRANSPARENT PLASTIC SUNDAE
透明高脚杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
370.5 (13) 12 / 96 AS-1038
EFFECTIVE FROM:28072010
PLASTIC BEER MUG
透明啤酒杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
769.5 (27) 6 / 72 AS-1070
PLASTIC BEER MUG
透明啤酒杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
456 (16) 6 / 72 AS-1068
PLASTIC DRINKING MUG
透明水密口杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
456 (16) 12 / 96 AS-1025
4. PLASTIC SHORT GLASS
透明花璃冷水杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
342 (12) 6 / 72 AS-1018
EFFECTIVE FROM:28072010
PLASTIC LONG DRINK
透明花猫杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
384.75 (13.5) 12 / 96 AS-1031
PLASTIC ICE CREAM CUP
透明六花杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
228 (8) 12 / 144 AS-1040
PLASTIC SHORT GLASS
小高脚杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
200 (7) 12 / 144 AS-1028
5. PLASTIC RED WINE GLASS
红梅杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
400 (13.5) 12 / 144 AS-1032
EFFECTIVE FROM:28072010
PLASTIC WINE GLASS
啤酒杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
360 (12) 24 / 192 AS-1039
PLASTIC ICE TEA CUP
冷饮杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
420 (14) 12 / 144 AS-1071
PLASTIC COCKTAIL GLASS
透明鸡尾酒杯
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
400 (14) - / 24 PN146(MMA)
6. PLASTIC BANANA SPLIT DISH
香蕉船
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
228 (8) 24 / 288 AS-1045
EFFECTIVE FROM:28072010
PLASTIC BOWL
精美小碗
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
199.5 (7) 24 / 288 AS-1006
PLASTIC CUP
SIZE LIT PKG. PCS ART NO
IN / CTN
0.2 - / 432 KT-77
胶身耳杯
PLASTIC BOWL
SIZE ML (OZ) PKG. PCS ART NO
IN / CTN
171 (6) 36 / 432 AS-1005
精美小碗