This location is a faded white wall in Stoke Poges, England. The wall represents typical areas where the target audience lives. The location is safe and secure with no hazards. The document's author chose this location to portray images the target audience can relate to and feel the magazine is at their level.

1. Location 1
For my first location I have chosen
a faded white wall. The location
of the wall is in Stoke Poges. The
wall itself is in a safe and secure
area with no potential hazards.
The reason I have chosen this
location is because it represents
locations across the country that
my target audience live around.
By enforcing this and portraying
images that my target audience
can relate to the target audience
can relate to the magazine and
will feel as though the magazine is
on the same level as them

2. ACTIVITY IS THE LOCATION SUITABLE FOR PRODUCTION? ADDITIONAL COMMENTS
Look around the location.
Natural area, safe and secure location
Talk to people there, organise filming permissions.
My land, therefore do not need permission
Identify the equipment you need to use. Camera
Model
BMX
Clothing
Examine and identify any potential health and safety issues
(Both people and equipment related issues e.g. crowd numbers being controlled; using safe cabling Area is outside and is in a safe location. My self and
practises and video equipment being set up in a sensible location that does not block access points or that the model were in safe positions throughout the shoot
damages the environment or frightens livestock) and the shoot itself was carried out safely and securely
Check the position of the sun and lighting conditions.
On the day of the shoot the weather was warm and
sunny so had to look for best location for best and
most efficient use of lighting
Look for interesting shots and camera angles. High angle
Over the shoulder
Long shot
Check the electricity supply. (For the majority of exterior locations you will be using battery power) Not much electricity used. Only that of the camera
Do a test sound/video recording and check for potential noise problems (traffic noise may be a problem; Area was in a quiet location, roads weren't near the
is a location on a main flight path to an airport?) location so there were no interruptions
Confirm times and dates with technical crew/actors or anybody you are interviewing, etc.
Discussed times etc over the phone and when the
model arrived at the location
Arrange car parking, access, loading, security, where possible.
was plenty of parking spaces, private land so was
secure as well.
Make sure everybody concerned with your video production knows what is happening and what is
expected of them when on location. everyone who was involved was informed on what

3. Location 2
The second location I have chosen
is again located in Stoke Poges.
The as to why I have chosen this
location is because like my
previous image, the majority of
my target audience have had to
or have grown up in areas like this
and I think that my target
audience will look onto the front
cover or contents page or Double
page spread and will be able to
relate to the model featuring in
the magazine

4. ACTIVITY IS THE LOCATION SUITABLE FOR PRODUCTION? ADDITIONAL COMMENTS
Look around the location.
Natural area, safe and secure location
Talk to people there, organise filming permissions.
My land, therefore do not need permission
Identify the equipment you need to use. Camera
Model
Clothing
Examine and identify any potential health and safety issues
(Both people and equipment related issues e.g. crowd numbers being controlled; using safe cabling Area is outside and is in a safe location. My self and
practises and video equipment being set up in a sensible location that does not block access points or that the model were in safe positions throughout the shoot
damages the environment or frightens livestock) and the shoot itself was carried out safely and securely
Check the position of the sun and lighting conditions.
On the day of the shoot the weather was warm and
the sun was setting so had to look for best location for
best and most efficient use of lighting
Look for interesting shots and camera angles. For this specific shoot I used the Long shot
Check the electricity supply. (For the majority of exterior locations you will be using battery power) Not much electricity used. Only that of the camera
Do a test sound/video recording and check for potential noise problems (traffic noise may be a problem; Area was in a quiet location, roads weren't near the
is a location on a main flight path to an airport?) location so there were no interruptions, only sounds
of natural features such as animals etc
Confirm times and dates with technical crew/actors or anybody you are interviewing, etc.
Discussed times etc over the phone and in person and
when the model arrived at the location
Arrange car parking, access, loading, security, where possible.
was plenty of parking spaces, private land so was
secure as well. However model does not drive so was
not neccessary
Make sure everybody concerned with your video production knows what is happening and what is
expected of them when on location. everyone who was involved was informed on what
was happening at all times.

5. Location 3
This location came across me
when I was carrying out my
photo shoot. I think that it
represents the wilderness and
can relate to some of my
target audience, by this I
mean that some of my target
audience will be from poverty
stricken areas and this
destination can relate to
them.

6. ACTIVITY IS THE LOCATION SUITABLE FOR PRODUCTION? ADDITIONAL COMMENTS
Look around the location.
Natural area, safe and secure location
Talk to people there, organise filming permissions.
My land, therefore do not need permission
Identify the equipment you need to use. Camera
Model
Clothing
Examine and identify any potential health and safety issues
(Both people and equipment related issues e.g. crowd numbers being controlled; using safe cabling Area is outside and is in a safe location. The model
practises and video equipment being set up in a sensible location that does not block access points or that were in safe positions throughout the shoot and the
damages the environment or frightens livestock) shoot itself was carried out safely and securely.
However I was standing on a scaffolding unit. However
I checked the unit thoroughly and it was safe and
secure.
Check the position of the sun and lighting conditions.
On the day of the shoot the weather was warm and
sun was setting so had to look for best location for
best and most efficient use of lighting
Look for interesting shots and camera angles. High angle
Over the shoulder
Long shot
Check the electricity supply. (For the majority of exterior locations you will be using battery power) Not much electricity used. Only that of the camera
Do a test sound/video recording and check for potential noise problems (traffic noise may be a problem; Area was in a quiet location, roads weren't near the
is a location on a main flight path to an airport?) location so there were no interruptions
Confirm times and dates with technical crew/actors or anybody you are interviewing, etc.
Discussed times etc over the phone and when the
model arrived at the location
Arrange car parking, access, loading, security, where possible.
Model did not drive so space was not needed and the
location itself was safe and secure.
Make sure everybody concerned with your video production knows what is happening and what is
expected of them when on location. everyone who was involved was informed on what
was happening at all times.

7. Reflection
• When starting my planning the first thing I felt I needed to do was to organise the planning itself. By this I
mean sort out everything and place it into a chart, this gives me an opportunity to sort everything out and
it also gave me time to carry out the planning section. I then organised my models I new some people that
I thought would fit well into my chosen genre, and they agreed to model for me. I told them what they
needed to do etc. I then organised the location of the shoot and told the models where the shoot was. The
shoot itself is in a quiet location and is out of the way of dangerous hazards. I then organised some
costumes and props for my models. I needed clothing that would fit my genre and I my self wear clothing
that people form my chosen genre wear so sorted that out. When on location I completed by Reece forms
thoroughly so that there were not any problems or dangerous hazards. Throughout the week I completed
the other various and important features that were needed when completing the planning such as the flat
plan of my magazine and mock ups of my front cover, contents page and my double page spread. When
creating my flat plan I used techniques that I thought would entertain and amuse my target audience.
Throughout planning I have learnt and discovered a lot more about the planning of magazines and other
various elements that occur in the planning stage of my task.