This document is a check sheet for reporting the material performance and specifications of a fuel filter. It includes sections for supplier details, dimensional comparison to OE specifications, filter media details, seal details, and performance test data. The key details provided are the supplier and part number, dimensions, media type and properties, seal material and properties, burst pressure rating, and initial filtration efficiency results. Mandatory performance testing requirements are also listed.

1. SOP 7.3 R - Fuel filter check sheet
GUD HOLDINGS (PTY) LTD
CONTROL FORM
FUEL FILTER - MATERIAL PERFORMANCE REPORT
1 of 2
A
No.
1 Supplier Details
2 Suppliers Part No.
3 Country of Origin
4 OE Supplier (Yes / No)
5 OE Part Number
5 Competitors Part Number
B
1 Fitment of this filter to vehicle and or housing has been confirmed. (Y/N)
2 Filter height (mm)
3
Connection inlets (I) & outlets (O)
type & size
4 Thread size (mm)
5 Direction of flow
6 Shape of filter
C
1 Element type (Star / Wrap)
2 Filtration Area (cm²)
3 Number of Pleats
4 Pleat Size (height / width); Wrap media (Length x width) (mm)
5 Media type (Celulose, Celulose + Meltblown)
6 Media basis weight (g/m²)
7 Media thickness / corrugation depth (mm)
8 Maximum pore size (µm)
9 Average pore size (µm)
10 Air permeability to ISO 9237 @ 200 Pa (l/m².s)
11 Media Burst Strength (kPa)
D
1 Seal Type (Head seal, ADBV)
1.1 Sealing Materials (i.e NBR, ACM, VMQ)
1.2 Hardness, (Shore A)
1.3 Density, ISO 1183-1 A
1.4 Compression Set,DIN 57517 Part 1, 22h, 100°C, 40% comp
1.5 Heat resistance, ISO 188, 72h/168h, xxx°C
Change of hardness
Change of volume
1.6
Fuel resistance,
Liquid F acc. ISO1817 / FAM B acc. DIN51604 or Liquid 2 acc. ISO 1817
e.g. at 72h/168h, xxx°C,
Change of hardness
Change of volume
Material Details
Supplier Details
OE Data
Dimensional Comparison
Filter Media Details
Supplier Data
Rev: 06/13 Prepared By: Approved By:
Fuel Element Fuel Element
Hino 23401-1020 PF7572
N/a Yes
N/a
No
107.2
N/a
N/a
OSI
Element
5374.2
111
23.8
N/a
Celulose
150.8
N/a
N/a
103.4 Min
70
NBR
Head Seal
70 h @ 100°C
25
ASTM D573
ASTM D395 22 h @ 100°C MAX
N/a
ASTM D 471
N/a
N/a
N/a
70 h @ 100°C
-10 to +5
0 to +25
ASTM D 471
ASTM D 471
67 to 78
N/a
N/A
N/A
OSI
Element
N/A
N/a
N/a
78
193
106
24.8
Synthetic
104.3
5348.3
N/a
102.6

2. SOP 7.3 R - Fuel filter check sheet
GUD HOLDINGS (PTY) LTD
CONTROL FORM
FUEL FILTER - MATERIAL PERFORMANCE REPORT
2 of 2
E
1 Operating pressure (kPa)
2 Nominal flow rate (l/h)
3*
Burst test
ISO 4020 6.7 (kPa)
4*
Pulse Test
ISO 4020 6.8 (0 to xxx kPa, xxx cycles per min)
5*
Flow restriction @ nominal flow rate
ISO 4020 6.3 (kpa)
6*
Constructional integrity
ISO 2942 (kpa)
7*
Initial efficiency @ nominal flowrate
ISO 19438:2003 (4-10 min.)
at 4 µm[c] / 5 µm[c] / 10µm[c] (%)
8*
Filter life
ISO 4020 6.4 (min)
Flow rate: Nominal flow rate L/h
9*
Test for water separation efficiency @ nominal flowrate
ISO 4020 (%)
10* Test fluid viscosity (mm²/s)
Denotes Mandatory fields
* IF NOT TESTED TO ISO PLEASE SPECIFY TO WHICH INTERNATIONAL STANDARD TEST ARE CONDUCTED TOO.
Performance Data
Signature: Signature:
Test carried out by: Approved by:
Date: Date:
Rev: 06/13 Prepared By: Approved By:
N/a
N/a
N/a
N/a
N/a
454.2
N/a N/a
N/a N/a
43% / 55% / 93%
10.3 kpa / ISO 19438N/a
N/a
N/a
N/a
N/a N/a
17g Per ISO19438
N/a