Monica becker turi cont ed - session c green materials for turi websitezevoush
2012 presentation on Innovative Business / University Partnership: The Safer Plasticizer Assessment Project - Project for the Green Chemistry & Commerce Council (GC3)
Possibilities and limitations of using production waste123Pratik Surve
Diab has production waste such as PET and PES possibly can be used in the manufacturing. It is prime responsibility of every industry to make proper policies to reduce production waste materials and play their role in this sustainability.
Now in this thesis, the company Diab in collaboration with Miljöbron Skåne
wants to use their production waste thermoplastic polymer materials (PET & PES) in Additive Manufacturing and play their role for balanced sustainability.
Monica becker turi cont ed - session c green materials for turi websitezevoush
2012 presentation on Innovative Business / University Partnership: The Safer Plasticizer Assessment Project - Project for the Green Chemistry & Commerce Council (GC3)
Possibilities and limitations of using production waste123Pratik Surve
Diab has production waste such as PET and PES possibly can be used in the manufacturing. It is prime responsibility of every industry to make proper policies to reduce production waste materials and play their role in this sustainability.
Now in this thesis, the company Diab in collaboration with Miljöbron Skåne
wants to use their production waste thermoplastic polymer materials (PET & PES) in Additive Manufacturing and play their role for balanced sustainability.
Plastic Extrusion, Moulding and Mould Designs (Plasma Films, Acrylic Fabrication, Design, Gas Injection Moulding, Thin Walled Injection Moulding, Injection Moulding, Blow Molding, Extrusion, Transfer Molding, Reinforcements for Thermosets, Welding Plastics, Carving Plastics)
Plastics extrusion is a high-volume manufacturing process in which raw plastic is melted and formed into a continuous profile. Extrusion produces items such as pipe/tubing, weather stripping, fencing, deck railings, window frames, plastic films and sheeting, thermoplastic coatings, and wire insulation.
See more
https://goo.gl/IjHE14
https://goo.gl/AefgZo
https://goo.gl/g1bXnK
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Plastics Extrusion, Plastic Extrusion Machines, Plastic Extrusion Process, Extrusion Moulding Process, Plastic Extrusion Plants, Industrial Plastic Extrusion, Plastic Extrusion Line, Plastic Moulding, Plastic Moulding Business, Products For Plastic Injection Moulding, Plastic Moulding Process, Injection Molding Process, Plastic Injection Molding Machines, Plastic Mould Design, Plastics Injection Mould Design, Injection Moulding Design Guide, Product Design for Plastic Moulding, Design for Injection Moulding, Preparation of Plasma Films, Transport Phenomena in Polymer Films, Acrylic Fabrication, Reinforcements for Thermosets, Miscellaneous Thermoplastic Process, Compression and Transfer Molding, Disciplined Process Stategy for Injection Moulding, Injection Molding, Blow Molding, Extrusion, Newly Developed Injection Moulding Technology, Injection Moulding, Plastic Injection Moulding Environment in India, Tiebarless and 2-Platen Injection Moulding Machines, Thin Walled Injection Moulding, Mold Cooling Best Bet for High Profits, Gas Injectionmoulding Technology, Mould Materials and Processing Methods, Laminate Composition, Reinforcements for Filament Winding, Fiberglass Technology, Making Glass Fibers, Glass Composition, Glass Fabric Construction and Weaves, Plastisol Molding, Injection Molding Machines, Injection Unit, Mold Clamping Unit, Functions of Mold Components, Injection Moulding Technique, Economical Production of Parts, Thermosetting Materials and Elastomers, Tiebarless Machine, Two-Shot Moulding Process, Assisted Injection Moulding Process, Hand Injection Moulds, Single Cavity Two Plate Moulds, Multi Cavity Moulds, Three Plate Moulds, Multi Colour Moulds, Making of Glass Fiber, Glass Fiber Manufacture, Glass Fiber Manufacturing Process, Glass Fiber Manufacturing, Making Glass Fibers, Method for Making Fiber Glass, Npcs, Niir, Process Technology Books, Business Consultancy, Business Consultant
Manufacture of Plastic Films, HDPE and Thermoset Plastics Ajjay Kumar Gupta
Manufacture of Plastic Films, HDPE and Thermoset Plastics (Bopp Films, Polyester Films, Polyolefins, Polypropylene, Vinyls, Polyvinyl Acetate, Expanded Films, Vinyl Ester Resins, Unsaturated Polyesters, Thermoset Polyurethanes, Polyurethane Coatings, Lamination, Thermoforming, Thermoplastic Polymers)
Plastic film is a thin continuous polymeric material. Thicker plastic material is often called a “sheet”. These thin plastic membranes are used to separate areas or volumes, to hold items, to act as barriers, or as printable surfaces.
Plastic films are used in a wide variety of applications. These include: packaging, plastic bags, labels, building construction, landscaping, electrical fabrication, photographic film, film stock for movies, video tape, etc.
See more
https://goo.gl/5pMkUl
https://goo.gl/7PxKYG
https://goo.gl/jw5rJa
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Volatiles From Plastic Manufacturing Process, Production of Plastic Films, Plastic Manufacturing Process, Plastic Extrusion and Manufacturing Process, Plastic Extrusion Process, Plastic Film Manufacturing, Production Process of Plastic Film, Plastic Film and Extrusion Equipment, Thermoset Plastic Manufacturing Process, Plastic Film Manufacture, Production of Plastic Films, Process for Production of Plastic Films, Plastic Films Production, Plastic Film Manufacturing Business Plan, Business Plan on Plastic Film Manufacturing, Starting Plastic Film Manufacturing Business, Profitable Plastic Film Manufacturing Business, Start Small Plastic Film Manufacturing Business, High Density (HDPE) Production, High Density Polyethylene Manufacturing Process, Manufacturing Process for HDPE, HDPE/PP Bags Manufacturing Plant, Thermoset Processing, Plastic Manufacturing Methods, Thermoplastic Processing Methods, How are Thermosetting Plastics Made, Methods of Manufacturing Thermoplastic, Thermosetting Plastics, Manufacturing Process of Thermosetting Plastics, Business Plan on Thermosetting Plastics Manufacturing, Starting Thermosetting Plastics Manufacturing Business, Thermosetting Plastics Manufacturing Business, Thermosetting Plastics Manufacturing Business Plan, How to Start Thermosetting Plastics Manufacturing Industry, Thermoplastic and Thermoset Processing Methods, BOPP Film Production Line, BOPP Film Production, Biaxially Oriented Polypropylene Films, Bopp Film Manufacturing Process, Bopp Film Plant, Biaxially Oriented Film Production, BOPP Film Production Plant, Extrusion of Film, Water Cooled Polypropylene Film, Plastics Net From Film, Pouch Making Equipment, Sachet Making Machines, Process for Manufacturing Unsaturated Polyester Resins
Patrick Plastics has established itself has the leading solutions provider for custom plastic components.
Patrick Plastics creativity, flexibility and an unique approach to manufacturing solutions allows us to provide plastic solutions for our customers’ plastic designs.
On July 10th Innovate UK and the KTN held a business innovation day to showcase 30 of the Innovate UK projects that are currently active in the area of Additive Manufacturing. The presentations and pitches made on the day are now available to download. Topic 6 focuses on New Materials and Conductive Components.
central institute of plastics engineering & technology is an autonomous body under ministry of chemicals & fertilizers. Govt. of India offer various of services in the plastics field like higher education, research & development, consultancy & project work in the plastics field
The report provides a complete roadmap for setting up a Plastic Pyrolysis Manufacturing Plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Plastics have woven their way into our daily lives and now pose a tremendous threat to the environment. Over a 100 million tonnes of plastics are produced annually worldwide, and the used products have become a common feature at over flowing bins and landfills. Though work has been done to make futuristic biodegradable plastics, there have not been many conclusive steps towards cleaning up the existing problem. Here, the process of converting waste plastic into value added fuels is explained as a viable solution for recycling of plastics. Thus two universal problems such as problems of waste plastic and problems of fuel shortage are being tackled simultaneously. In this study, plastic wastes (High density polyethylene) were used for the pyrolysis to get fuel oil that has the same physical properties as the fuels like petrol, diesel etc. Pyrolysis runs without oxygen and in high temperature of about 300°C which is why a reactor was fabricated to provide the required temperature for the reaction. Converting waste plastics into fuel hold great promise for both the environmental and economic scenarios. Thus, the process of converting plastics to fuel has now turned the problems into an opportunity to make wealth from waste. The hazards of plastic waste is well known to us. The conversion of oil from plastic has dual benefits. First of all the oil produced can be used as a fuel for domestic purposes and also in vehicles and industries when further refined. Secondly the various types of pollution caused due to waste plastics can be minimized. Plastic in the first place is manufactured from natural gas specifically from ethane which is a constituent of natural gas. Therefore the waste plastic can be converted back into it. For the process of conversion a machine can be used which will heat the plastic to a temperature so that it melts and does not burns.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
More Related Content
Similar to PCN [PLASTICS CONSULTANCY NETWORK] buyers guide 2020
Plastic Extrusion, Moulding and Mould Designs (Plasma Films, Acrylic Fabrication, Design, Gas Injection Moulding, Thin Walled Injection Moulding, Injection Moulding, Blow Molding, Extrusion, Transfer Molding, Reinforcements for Thermosets, Welding Plastics, Carving Plastics)
Plastics extrusion is a high-volume manufacturing process in which raw plastic is melted and formed into a continuous profile. Extrusion produces items such as pipe/tubing, weather stripping, fencing, deck railings, window frames, plastic films and sheeting, thermoplastic coatings, and wire insulation.
See more
https://goo.gl/IjHE14
https://goo.gl/AefgZo
https://goo.gl/g1bXnK
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Plastics Extrusion, Plastic Extrusion Machines, Plastic Extrusion Process, Extrusion Moulding Process, Plastic Extrusion Plants, Industrial Plastic Extrusion, Plastic Extrusion Line, Plastic Moulding, Plastic Moulding Business, Products For Plastic Injection Moulding, Plastic Moulding Process, Injection Molding Process, Plastic Injection Molding Machines, Plastic Mould Design, Plastics Injection Mould Design, Injection Moulding Design Guide, Product Design for Plastic Moulding, Design for Injection Moulding, Preparation of Plasma Films, Transport Phenomena in Polymer Films, Acrylic Fabrication, Reinforcements for Thermosets, Miscellaneous Thermoplastic Process, Compression and Transfer Molding, Disciplined Process Stategy for Injection Moulding, Injection Molding, Blow Molding, Extrusion, Newly Developed Injection Moulding Technology, Injection Moulding, Plastic Injection Moulding Environment in India, Tiebarless and 2-Platen Injection Moulding Machines, Thin Walled Injection Moulding, Mold Cooling Best Bet for High Profits, Gas Injectionmoulding Technology, Mould Materials and Processing Methods, Laminate Composition, Reinforcements for Filament Winding, Fiberglass Technology, Making Glass Fibers, Glass Composition, Glass Fabric Construction and Weaves, Plastisol Molding, Injection Molding Machines, Injection Unit, Mold Clamping Unit, Functions of Mold Components, Injection Moulding Technique, Economical Production of Parts, Thermosetting Materials and Elastomers, Tiebarless Machine, Two-Shot Moulding Process, Assisted Injection Moulding Process, Hand Injection Moulds, Single Cavity Two Plate Moulds, Multi Cavity Moulds, Three Plate Moulds, Multi Colour Moulds, Making of Glass Fiber, Glass Fiber Manufacture, Glass Fiber Manufacturing Process, Glass Fiber Manufacturing, Making Glass Fibers, Method for Making Fiber Glass, Npcs, Niir, Process Technology Books, Business Consultancy, Business Consultant
Manufacture of Plastic Films, HDPE and Thermoset Plastics Ajjay Kumar Gupta
Manufacture of Plastic Films, HDPE and Thermoset Plastics (Bopp Films, Polyester Films, Polyolefins, Polypropylene, Vinyls, Polyvinyl Acetate, Expanded Films, Vinyl Ester Resins, Unsaturated Polyesters, Thermoset Polyurethanes, Polyurethane Coatings, Lamination, Thermoforming, Thermoplastic Polymers)
Plastic film is a thin continuous polymeric material. Thicker plastic material is often called a “sheet”. These thin plastic membranes are used to separate areas or volumes, to hold items, to act as barriers, or as printable surfaces.
Plastic films are used in a wide variety of applications. These include: packaging, plastic bags, labels, building construction, landscaping, electrical fabrication, photographic film, film stock for movies, video tape, etc.
See more
https://goo.gl/5pMkUl
https://goo.gl/7PxKYG
https://goo.gl/jw5rJa
Contact us:
Niir Project Consultancy Services
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Tags
Volatiles From Plastic Manufacturing Process, Production of Plastic Films, Plastic Manufacturing Process, Plastic Extrusion and Manufacturing Process, Plastic Extrusion Process, Plastic Film Manufacturing, Production Process of Plastic Film, Plastic Film and Extrusion Equipment, Thermoset Plastic Manufacturing Process, Plastic Film Manufacture, Production of Plastic Films, Process for Production of Plastic Films, Plastic Films Production, Plastic Film Manufacturing Business Plan, Business Plan on Plastic Film Manufacturing, Starting Plastic Film Manufacturing Business, Profitable Plastic Film Manufacturing Business, Start Small Plastic Film Manufacturing Business, High Density (HDPE) Production, High Density Polyethylene Manufacturing Process, Manufacturing Process for HDPE, HDPE/PP Bags Manufacturing Plant, Thermoset Processing, Plastic Manufacturing Methods, Thermoplastic Processing Methods, How are Thermosetting Plastics Made, Methods of Manufacturing Thermoplastic, Thermosetting Plastics, Manufacturing Process of Thermosetting Plastics, Business Plan on Thermosetting Plastics Manufacturing, Starting Thermosetting Plastics Manufacturing Business, Thermosetting Plastics Manufacturing Business, Thermosetting Plastics Manufacturing Business Plan, How to Start Thermosetting Plastics Manufacturing Industry, Thermoplastic and Thermoset Processing Methods, BOPP Film Production Line, BOPP Film Production, Biaxially Oriented Polypropylene Films, Bopp Film Manufacturing Process, Bopp Film Plant, Biaxially Oriented Film Production, BOPP Film Production Plant, Extrusion of Film, Water Cooled Polypropylene Film, Plastics Net From Film, Pouch Making Equipment, Sachet Making Machines, Process for Manufacturing Unsaturated Polyester Resins
Patrick Plastics has established itself has the leading solutions provider for custom plastic components.
Patrick Plastics creativity, flexibility and an unique approach to manufacturing solutions allows us to provide plastic solutions for our customers’ plastic designs.
On July 10th Innovate UK and the KTN held a business innovation day to showcase 30 of the Innovate UK projects that are currently active in the area of Additive Manufacturing. The presentations and pitches made on the day are now available to download. Topic 6 focuses on New Materials and Conductive Components.
central institute of plastics engineering & technology is an autonomous body under ministry of chemicals & fertilizers. Govt. of India offer various of services in the plastics field like higher education, research & development, consultancy & project work in the plastics field
The report provides a complete roadmap for setting up a Plastic Pyrolysis Manufacturing Plant. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Plastics have woven their way into our daily lives and now pose a tremendous threat to the environment. Over a 100 million tonnes of plastics are produced annually worldwide, and the used products have become a common feature at over flowing bins and landfills. Though work has been done to make futuristic biodegradable plastics, there have not been many conclusive steps towards cleaning up the existing problem. Here, the process of converting waste plastic into value added fuels is explained as a viable solution for recycling of plastics. Thus two universal problems such as problems of waste plastic and problems of fuel shortage are being tackled simultaneously. In this study, plastic wastes (High density polyethylene) were used for the pyrolysis to get fuel oil that has the same physical properties as the fuels like petrol, diesel etc. Pyrolysis runs without oxygen and in high temperature of about 300°C which is why a reactor was fabricated to provide the required temperature for the reaction. Converting waste plastics into fuel hold great promise for both the environmental and economic scenarios. Thus, the process of converting plastics to fuel has now turned the problems into an opportunity to make wealth from waste. The hazards of plastic waste is well known to us. The conversion of oil from plastic has dual benefits. First of all the oil produced can be used as a fuel for domestic purposes and also in vehicles and industries when further refined. Secondly the various types of pollution caused due to waste plastics can be minimized. Plastic in the first place is manufactured from natural gas specifically from ethane which is a constituent of natural gas. Therefore the waste plastic can be converted back into it. For the process of conversion a machine can be used which will heat the plastic to a temperature so that it melts and does not burns.
Similar to PCN [PLASTICS CONSULTANCY NETWORK] buyers guide 2020 (20)
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Kseniya Leshchenko: Shared development support service model as the way to ma...Lviv Startup Club
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
2. What we do (at a glance)
• Graham Chetwood: Cost reduction from improved purchasing.
• Terence Cooper: Bioplastics, sustainable packaging, recycling &
recovery.
• Peter Cox: Extrusion & multi-layered plastics.
• Peter Cracknell: High-quality on site polymer training &
consultancy services.
• Gerhard Crossman: Turnaround & process improvements,
change management.
• John Duncan: Thermal, dynamic mechanical & dielectric
analysis.
• Keith Freegard: Recycling and environmental
• John Gearing: Thermal testing.
• John Gibbins: Recycling from materials to equipment.
• Sarah Greenwood: Packaging.
• Trevor Hutley: Global polymer industry, research & innovation
advisor.
• Michail Kalloudis: Testing, research/development & failure
analysis.
• Robin Kent: Energy surveys & energy management.
• Pravin Mistry: Global: mergers & acquisitions, recruitment,
chairman, SHEQ systems.
• Mike Newey: Extrusion specialist, tool design and training.
• Jeremy Pingstone: Injection moulding. Education, skills &
apprenticeships.
• Fabrizio Rizzato: Thermoset polyurethanes from chemistry to
equipment.
• Eddie Sheridan: Market research, materials, packaging &
improvement.
• Bernard Sinclair: Product design.
• Robert Tomlinson: Providing solutions to processing problems.
3. 3 Plastics Consultancy Network
Why use the PCN?
The PCN is a professional network of the best independent plastics
consultants in the world.
Every PCN member is an independent, highly qualified and
experienced plastics consultant.
PCN members are not only located around the world but also work
around the world.
Membership is controlled and is restricted to professional consultants.
All PCN members have a proven track record in plastics consultancy
and years of experience in industry. They can bring this experience to
your company at a fraction of the cost of hiring in-house resources.
All PCN members are committed to helping their clients find effective
solutions, actively, quickly, creatively and at minimum cost.
Selecting a PCN member consultant guarantees a professional
response to a professional need.
The PCN - for all you need to know about plastics, from the experts.
www.pcn.org
pcn
PLASTICS
CONSULTANCY
NETWORK
5. 5 Plastics Consultancy Network
Business
improvement
Environmental
Expertwitness
Export&import
Marketresearch
M&A
Automotive
General
Medical
Packaging
3Dprinting&
additivemanufacturing
Authoring
Degradation
Projectmanagement
Recruitment
Troubleshooting
Training
Graham Chetwood
● ● ● ● ●
Terence Cooper
● ● ● ●
Peter Cox
● ●
Peter Cracknell
● ●
Gerhard Crossman
● ●
John Duncan
● ● ●
Keith Freegard
● ●
John Gearing
John Gibbins
● ● ●
Sarah Greenwood
● ● ● ●
Trevor Hutley
● ● ●
Michail Kalloudis
● ●
Robin Kent
● ● ● ●
Pravin Mistry
● ● ●
Mike Newey
●
Jeremy Pingstone
● ● ● ●
Fabrizio Rizzato
● ●
Eddie Sheridan
● ● ● ●
Bernard Sinclair
● ● ●
Robert Tomlinson
● ●
Commercial Markets Other skills
www.pcn.org
6. 6Plastics Consultancy Network
Dr. Terence A. Cooper
ARGO Group International, 15 Stage Road, Newark, DE 19711-4001, USA
Tel: +1 302 366 8764
Mobile: +1 302 420 9467
ARGO Group International, 11 Offley Road, Sandbach, CW11 1GY, UK
Tel: +44 (0) 2032 860 930
Mobile: +44 (0) 7963 006 941
E-mail: tacooper@argopolytech.com
Web: www.pcn.org/Cooper.htm
Specialities; Materials & formulation, Applications & markets, Compounding, Environment &
sustainability, Biobased, Renewable, (Bio)degradable, Compostable & Water soluble plastics,
Functional polymers/blends, Packaging, Recycling and Recovery.
ARGO Group is a global polymer consultancy providing specialized services in chemical and polymer
science, materials technology and market and applications development in North America, Europe,
Japan and other international markets. We provide services globally in the
following areas:
New product, process, market and applications development in bioplastics (biobased, renewable,
biodegradable and compostable) and water-soluble plastics.
• Polymer and plastics formulation, compound and process development.
• Development of biofuels, biobased and renewable chemicals, monomers and plastics.
• Packaging technology, package design and use, environmental issues and sustainability.
• Recycling and recovery technology and end-of-cycle processes (waste-to-energy, fuels,
monomers and downstream chemicals).
• Strategic market analysis and research, development and technology portfolio evaluation.
Graham Chetwood
SSC Consult, 88 Route de St Nom, 78620 L’Etang La Ville, France
Tel: +33 (0) 139 16 44 73
Mobile: +33 (0) 625 00 23 77
E-mail: gchetwood@ssc-consult.eu
Web: www.ssc-consult.eu
Specialities; Business improvement, Export and import, Market research, Packaging, Project
management.
7. 7 Plastics Consultancy Network
Dr. Peter Cox
Peter Cox Associates, 19A Oxford Street, Lambourn, Berks, RG17 8XS, UK
Tel: +44 (0) 1488 720 27
Mobile: +44 (0) 7713 608 302
E-mail: drpeter.cox@pca-materials.com
Web: www.pca-materials.com
Specialities; Extrusion (Mono and Multilayer, Pipe and Tube), Expert witness, Training, Packaging
Products, Blow moulding (Multilayer).
Peter Cox Associates is a leading consultancy for multilayer extrusion structures and polymer related
properties. We provide the following services:
• Advice on structures required for multilayer products.
• Extrusion -Mono and Multilayer pipe (especially multilayer structures as used in cold/hot
water applications) and tube.
• The design of extrusion dieheads to produce multilayer products for extrusion and blow
moulding applications including recycling applications.
• In house teaching on single screw extrusion and product lines.
• Technical consultancy on extrusion and polymer issues.
• Rheology and melt properties of polymers.
• Training for extrusion technology applications.
• Training for the properties of multilayer and laminated structures and how to manufacture
them including extrusion by sheet, cast and blown film or tube and blow moulding and
laminating.
• Expert witness reports on polymer products and production means.
Peter Cracknell
PSC Associates, 9 Saffron Close, Shoreham-by-Sea, West Sussex, BN43 6JF, UK
Tel: +44 (0) 1273 885 914
E-mail: peter.cracknell3@ntlworld.com.
Web: www.pcn.org/Cracknell.htm
Specialities; Materials, Tooling, Expert Witness, Troubleshooting, Training.
PSC Associates is a leading online training company, delivering polymer engineering degree modules
in Plastic Materials and Plastic Part Design for a number of universities and companies worldwide.
Our services include:
• Onsite Plastic Materials Training, including: Commodity, Engineering and High Performance
Plastics. Plastic injection mould design and plastic part design courses.
• Assessment of training requirement, design and delivery of bespoke onsite short courses
within the UK and overseas.
• Consultancy and Troubleshooting on Injection Moulding, Vacuum Forming, Processing/Tooling
and Plastics Materials Selection.
• Expert Witness reporting on Mould Tooling, Plastic Part Design and Plastic Materials selection.
Many years of experience working in the polymer Automotive, Medical, Aerospace and Packaging
sectors.
PSC
Associates
8. 8Plastics Consultancy Network
Dr. John Duncan
Lacerta Technology Ltd., 80 Hathern Road, Shepshed, Leicestershire, LE12 9GX, UK
Tel: +44 (0) 1509 828 890
E-mail: john.duncan@lacerta-technology.com
Web: www.lacerta-analytical.com
Specialities; Analysis, Materials, Testing, Training, Instrument servicing.
Lacerta Technology offers Contract Research for assistance and advice on materials’ development
and characterisation of mechanical and thermal properties over a wide temperature range and in
controlled environments, for example air, nitrogen, fluid immersion and varying relative humidity.
Dynamic mechanical and dielectric analysis are particularly sensitive to changes in polymeric
structure in the solid state, for example with blends, the effect of cooling rate and the degree of cure
for thermoset resins. Detailed analysis can assist in the optimisation of processing conditions.
Contract thermal analysis work, using the following techniques: DSC, DMA & DETA and the novel
identiPol QA, specifically designed for Quality Assurance in the plastics’ industry.
Our reputation is well known in the field of Thermal Analysis.
• Test method development.
• Practical use temperatures.
• Studies of blended materials.
• Degree of cure studies.
• Composite materials measurement.
• Deformation mechanisms in plastics.
Gerhard Crossman
Forester Business Consulting Ltd., 1 Church Lane, Sproughton, Suffolk IP8 3BA, UK
Tel: +44 (0) 1473 463 440
Mobile: +44 (0) 7889 034 975
E-mail: gcrossman@fbc-ltd.com
Web: www. fbc-ltd.com
Specialities; Extrusion and injection moulding (PVC, PE, PP, GRP), Building products, Packaging
products, general business advice for profitability improvements and turnarounds, Project
management and LEAN support.
"Helping your business succeed" - not just under challenging economical conditions.
For more than 20 years we provide professional strategic business advice on successful business
transformation and sustainable operational performance improvements for the European industry.
Main areas of activity range from hard and soft plastics processing to food and pharma packaging.
Our focus is on maintaining operational excellence through sustainable operational and financial
improvements and long-term partnerships with our international client base.
For more information and a full project list please visit either our website www.fbc-ltd.com or my
personal profiles on LinkedIn or Xing.
We look forward to your enquiry.
9. 9 Plastics Consultancy Network
John Gearing
Gearing Scientific Ltd., The Old Rectory, Seven Sisters Road, St Lawrence, Isle of Wight,
PO38 1UZ, UK.
Tel 1: +44 (0) 1983 852 211
E-mail: gearingsci@yahoo.com (email is always better for a quick response)
Web: www.gearingscientific.net
Specialities; Analysis / Testing: Particularly thermal conductivity and specific heat for any polymer
or composite. DMA/DMTA for Tg's. TMA for measuring thermal expansion of plastics and composite
and other materials. TGA for degradation at elevated temperatures.
Gearing Scientific Ltd is a contract test house for thermal testing:
• Thermal conductivity testing.
• Thermal expansion on a TMA of solids.
• DMA/DMTA testing for Tg of composites and polymers and relative stiffness.
• DSC and TGA.
• GPC calibration standards.
Gearing Scientific Ltd have over 30 years experience of DMA / DMTA testing of polymers and
composites for the glass transitions (Tg’s) and relative stiffness at certain vibration frequencies. From
<<-100°C up to as high as is needed.
Over 35 years experience of thermal conductivity testing from 0 to 250°C (or less for some
materials!) using one of 6 different apparatus here in our lab. From vacuum panels to any plastic or
rubber or composite material. Also Cp of composite panels. Solids and liquids and gels etc.
TMA testing for the co-efficient of thermal expansion (CTE) of solids from -150 to 1000°C. GPC
calibration standards, and research co-polymers from N America at reduced prices.
Keith Freegard
KFC Limited, 2 Manor Court Rd, Ealing W7 3EL, UK
Tel: +44 (0) 208 567 1452
Mobile: +44 (0) 7867 526 768
E-mail: keith@freegard.net
Web: www.freegard.net
Specialities; Materials selection, Product design, Equipment, Mixing and compounding, Melt
filtration, Testing, Environmental and recycling, Expert witness and legal, Legislative and regulatory,
Marketing and market research, Strategic planning and forecasting, Automotive, Electrical and
electrochemical, Packaging, Benchmarking, Project management.
10. 10Plastics Consultancy Network
Sarah Greenwood
Sarah Greenwood Packaging, BBIC, Innovation Way, Barnsley, S75 1JL, UK.
Tel: +44 (0) 1226 249 590
Mobile: +44 (0) 7826 791 045
E-mail: sarah@scgreenwood.co.uk
Web: www.scgreenwood.co.uk
Specialities; Packaging Construction, Barrier Materials, Sustainable Materials, Blown Film Extrusion,
Packaging Films, Packing Operations, Thermoforming, Printing, Injection Moulding, Blow Moulding,
Value Engineering, Procurement, Environmental Policy, Packaging, Automotive, Project
Management, Problem Solving, Testing, Line trials, Process Optimisation, Product Development.
Sarah Greenwood, BSc(Hons), MSc(Eng), MIMMM, APkgPrf.
A Polymer Technologist, Sarah has worked and contributed to the development of car disc brake pads
for T&N and high performance packaging films for BP. She has held demanding technical positions in
all aspects of the packaging supply chain with Mars, Sun Branding Solutions, Asda and Fox’s Biscuits.
Sarah now works with companies from start-ups to blue-chips on all aspects of innovation,
specification and problem solving.
She holds an MSc(Eng) in Polymers and Polymer Composites, is an Accredited Packaging Professional
and is a Member of IOM3.
John Gibbins
International Environmental Solutions Ltd., Ashleigh House, The Oaks,
Wembdon Rise, Wembdon, Bridgwater Somerset, TA6 7QL, UK
Tel: +44 (0) 1278 423 544
Mobile: +44 (0) 7860 688 544
E-mail: john@internationalenvironmentalsolutions.co.uk
Web: www.internationalenvironmentalsolutions.co.uk
Specialities;
• We are global, plastics reprocessing production consultants.
• We specialise in mergers and acquisitions.
• We buy, sell and source plastic materials for extruders, moulders and other processes.
• We offer single machinery, tooling and complete process lines for recycling plastics.
• We offer all ancillary equipment including: handling, extraction, washing, sorting, cleaning,
metal removal, loading, storage, dosing, blending, bagging, weighing, testing, etc.
• We offer complete recycling solutions to the recycling industry from design to full production.
• We can source suitable factory units and plant layout.
• We can obtain all licences.
• We offer full training at all levels.
• We offer toll processing.
• We offer warehousing and distribution.
• We offer a complete range of recycled, off-spec, virgin and additives.
• We consult on waste reduction, alternative materials.
11. 11 Plastics Consultancy Network
Dr. Michail Kalloudis
Impact Solutions Ltd., 16 Abbotsinch Road, Grangemouth, FK3 9UX, UK
Tel: +44 (0) 1324 489 182
E-mail: Michail.Kalloudis@impact-solutions.co.uk
Web: www.impact-solutions.co.uk
Specialities; Testing, Characterisation and Development of Polymers, Plastics and Composites;
Failure analysis and expert witness, Polymer Lab building and Polymer Training.
Expert in Testing and Characterisation of Plastic and Composites. Strong experience in Polymer
Research & Development as well as failure analysis in polymer-based materials.
• Material Scientist, with a PhD on polymer physics and more than 8 years of experience in the
development and characterisation of materials.
• Project Manager in long and short-term material development projects and initiated
collaborations with top research institutes and international companies
• Member of the IUPAC sub-committee of the Structure and Properties of Commercial Polymers
• Strong background in advanced materials such as composites, biomaterials, polymer etc.
Dr. Trevor J. Hutley
Arrabon Technologies Limited, Esuley, The Street, Hapton, NR15 1AD, UK
Tel: +44 (0) 1508 488 265
Mobile: +44 (0) 7895 012 902
E-mail: TrevorHutley@consultant.com
Web: www.pcn.org/Hutley.htm
Specialities; Global polymer industry specialist; Formulation, Materials, Additives,
Compounding, Product development, Technology transfer, Technology commercialisation,
Market research, Problem solving, Strategic thinking, Training.
Dr Trevor Hutley is a recognised polymer expert, an invited conference speaker and moderator, with
a passion for teaching, who has broad experience in the global polymer and petrochemical industry,
across many companies and organisations, in many pioneering and complex situations.
An unusual combination of broad and deep technology and science knowledge, combined with
finance, marketing, manufacturing and business experience. An advisor on research & innovation.
linkedin.com/in/trevorhutley
12. 12Plastics Consultancy Network
Pravin S Mistry
PREA Ltd. PREA House, Manchester, M43 0AB UK
Tel: +44 (0) 161 207 8007
Mobile: +44 (0)7810 882 339
E-mail: prea@prea.co.uk
Web: www.prea.co.uk
A leading global manufacturing consultancy:
• Merger & Acquisitions, Buying and Selling Companies.
• Preparing Companies for sale.
• Companies in Distress.
• Chairman Guidance.
• Restructuring. Growth Strategy.
• Polymer Technical Consultancy, Plastics, Rubber, Composites, Adhesives, Polyurethanes.
• Recruitment.
• SHEQ - Health & Safety, Quality, Environmental Systems, Implementation, Management
Auditing.
We have been established for over 25 years and operate in UK/ Europe, Nordics, Scandinavia,
Switzerland, North America, Canada, South America. Middle East, Africa, India, China, Australia and
New Zealand.
Please contact us in confidence. We are available 7 days a week.
Dr. Robin Kent
Tangram Technology Ltd., 33 Gaping Lane, Hitchin, SG5 2JE, UK
Tel: +44 (0) 1462 437 686
Mobile: +44 (0) 7801 531 268
E-mail: pcn@tangram.co.uk
Web: www.tangram.co.uk
Specialities; Materials, Injection moulding, Extrusion, Environmental, Energy surveys and energy
management for plastics processors, Carbon footprinting for plastics processors and products, Cost
management for plastics processors, Quality management for plastics processors, Building products,
Authoring, Training, Project management.
Tangram are a leading international consultancy for energy management in plastics processing. We
provide the following services:
• Energy surveys for plastics processors.
• Energy management training for plastics processors.
• Technical authoring services.
• Quality management for plastics processors.
• Cost management for plastics processors.
We are experts in reducing energy use in plastics processing and work with large international
processors on corporate programmes to reduce energy use, save money and improve the carbon
footprint of operations.
13. 13 Plastics Consultancy Network
Mike Newey
Mike Newey Consultancy Services, 148 High Street, Pensford, Bristol BS39 4BH
Tel: +44 (0)1761 490 777
Mobile: +44 (0) 7432 137946
E-mail: mike@mncs2011.plus.com
Web: www.pcn.org/Newey.htm
Specialities; Profile, pipe and sheet extrusion and extrusion training. Tooling design, process design,
equipment specification and procurement. Plant design and set up, project management, product
development and material development. R&D Tax Credits and Expert Witness.
Mike Newey Consultancy Services is a technical consultancy specialising in Plastic extrusion and
compounding. We provide the following services:
• Profile, pipe and sheet extrusion.
• Tooling design.
• Small scale compounding and compound development.
• Process training.
• Feasibility studies.
• R&D Tax credit claims.
With over 40 of experience in the plastics industry, our specialisation is innovation in extrusion and
compounding, starting with 25 years in production and works management, 15 years in Research
and Development and an independent consultant since 2011.
We have specific experience in compounding specialist formulations and extruding many types of
thermoplastics from very high specification engineering thermoplastics to lower cost commodity
materials.
Pravin S Mistry
Chemical and Polymer Recruitment Solutions Ltd., PREA Ltd. PREA House, Manchester,
M43 0AB UK
Tel: +44 (0) 161 207 8007
Mobile: +44 (0)7810 882 339
E-mail: recruitment@prea.co.uk
Web: www.chemicalandpolymer-recruitmentsolutions.com
We are an International Recruitment Specialist company for the Chemical and Polymer (Plastics
Rubber, Composites, Polyurethane, Adhesives & Textile) industry.
Our headquarters are based in the UK and through our worldwide offices we have a continual pipeline
of candidates looking for jobs and employers looking to fill vacancies.
A few examples of our assignments are as follows:
• Executive Search: Chairman, CEO, Managing Director, Financial Director, Sales Director,
Operations Directors, Quality Directors, Technical Directors.
• Managers: Sales, Operation / Production, Quality, Technical, HSE.
• Technical: Colourist, Technologist, Sales, Quality Production, Technical Service, Technical
Sales, Marketing, Engineering.
• Assistance with CV writing.
• We also offer an outplacement service to candidates through the employers.
We have been established for over 25 years and operate in UK/ Europe, Nordics, Scandinavia,
Switzerland, North America, Canada, South America. Middle East, Africa, India, China, Australia and
New Zealand.
Please contact us in confidence. We are available 7 days a week.
14. 14Plastics Consultancy Network
Fabrizio Rizzato/Petra Mickova
Fabrizio Rizzato: Alea s.n.c. di Rizzato Fabrizio & Mickova Petra, Via Prà
Secco 137/A36010 Carrè (VI) - Italy
Tel: +39 334 990 12 30
E-mail: frizzato@aleapur.com or pmickova@aleapur.com
Web: www.aleapur.com
Skype™: frizzato.aleapur
Specialities; POLYURETHANES: Additives & property modification, analysis, materials selection,
product design, product engineering, tool design and sourcing, material development, fine tuning of
thermoset polyurethanes. Equipment, foam moulding, health and safety and training, quality
assurance, thermoset pouring and injection. Finishing and decorating, testing. Marketing and market
research. Automotive, biomedical, general products, furniture, shoe industry. Literature and patent
search, project management, training, trouble shooting.
ALEA is dedicated to POLYURETHANES and guarantees to its customers consultancy and support
during all the stages of the production processes:
• Start-up and fine tuning of productions related to polyurethane articles.
• Development and fine tuning of PUR systems.
• Commercial distribution (equipment, chemicals, tools).
Jeremy Pingstone
ITS Plastics Ltd., UK
Tel: +44 (0) 1905 770 868
E-mail: jeremy@itsplastics.com
Web: www.itsplastics.com
Specialities; Injection Moulding, Sequential/Cascade Moulding, Project Management, Trouble
Shooting, Materials, Market Research, Training, Equipment Agent.
• Established 1997.
• Over 35 years experience in Injection Moulding, including project management, technical
support, process optimisation, general trouble shooting.
• Application development support.
• Project management from design to full production.
• Computer aided filing simulation on request.
• Consultancy for polymer related products and materials.
• Agent for process control and monitoring systems – UK & Ireland.
• Representation for hot runner systems – UK & Ireland.
• Specialist in education, skills and apprenticeships for polymer industry.
ITS-Plastics Ltd
15. 15 Plastics Consultancy Network
Bernard Sinclair
Product Engineering Associates, 11 Kerrison Road, Ealing, London, W5 5NW, UK
Tel: +44 (0) 20 8566 3456
E-mail: enquiries@prodeng.co.uk
Web: www.prodeng.co.uk
Specialities; Product Engineering, Product Design, Development and Troubleshooting (relating to
new and existing products), Injection Moulding, Roto Moulding, Blow Moulding and Thermoforming,
Expert Witness (Mechanical Design, Intellectual Property and Disputes).
Bernard Sinclair has undertaken a number of expert witness and legal assignments. These mainly
relate to disputes in connection with product design, intellectual properly or mechanical design
(Haberman and V & A Marketing vs Jackel International: Non-spill toddler cup Anywayup Cup, Blue
Gentian vs Tristar Products: Expandable Garden Hose - X Hose).
Clients for projects of this kind include:
Freshfields, Dibb Lupton Alsop (DLA), Millbank, Tweed, Hadley and McCloy, Bates, Wells and
Braithwaite, BNFL and Birmingham Alliance/Hammerson UK Properties, DWF LLP, Bristows and
Freshfields.
Eddie Sheridan
Edwin G Fisher Associates, 41 Walton Road, Bushey, Herts. WD23 2JD, UK
Tel: +44 (0) 1923 237 160
E-mail: info@egfa.co.uk
Web: www.egfa.co.uk
Specialities; Materials, Business improvement, Environmental, Market research, Technology
transfer, Packaging, Foam, Surveillance of new products, processes and technology, Mergers and
Acquisitions.
Edwin G Fisher Associates is a long established consultancy to the plastics and rubber industry. The
consultancy’s strength is in the area of business strategy. The organisation offers assistance in
techno-economic studies, marketing, market research, diversification, new product and technology
searches, feasibility studies, acquisition studies and licensing. Particular experience is available in
plastics, polymers, elastomers, paints, chemicals and packaging.
The consultancy assists clients with the development of their business activities by offering services
tailored to meet specific requirements and budget considerations whilst gaining maximum
effectiveness by close co-operation. Services provided include;
• Market research and forecasting.
• Business strategy.
• New product surveillance.
• Future trend analysis.
• Plastic packaging.
• Feasibility studies.
Since it was founded the organisation has worked with corporations world-wide.
16. 16Plastics Consultancy Network
Robert Tomlinson
Plastic Moulding Solutions, 19 Leander Close, Sutton-in-Ashfield, Nottinghamshire, NG17
5BF, UK
Tel: +44 (0) 1623 452 639
Mobile: +44 (0) 7769 555 685
E-mail: Robert@plasticmouldingsolutions.co.uk
Web: www.plasticmouldingsolutions.co.uk
Specialities; Injection moulding, All blow moulding processes, Mould tooling, Decoration of plastics,
Problem solving, Trouble shooting, Cost reduction, Interim management, Project management,
Merger & Acquisition, Technical due diligence, Technical reports and appraisals. All market sectors
served including packaging and medical.
Plastic Moulding Solutions is a consultancy aimed at solving all of the common moulding issues that a
company can have and provides the following services:
• Problem solving.
• Technical appraisals and audits.
• New product development.
• Injection moulding.
• All types of blow moulding.
18. 18Plastics Consultancy Network
The most experienced experts in the plastics industry
could be part of your team tomorrow!
More and more successful companies are shedding peripheral activities
to enable them to concentrate on their core expertise, and when they
need up to date specialised knowledge, they call in the acknowledged
experts. World-leading companies do this for lawyers, catering and
transport and when the expertise required involves plastics they call in
the best available - from the Plastics Consultancy Network.
Consultants can form a vital part of any management team. They can
be a valuable resource to be used as required. Unlike full-time staff,
they are not a permanent and significant overhead cost. They are a
variable and controllable cost to be used only as and when required.
There are few businesses today that are not exposed to global
influences. The Plastics Consultancy Network has members throughout
the world and individual members can tap into knowledge to provide
both global and local solutions to major or local issues.
The PCN is not a general management consultancy; it is a specialist
group of independent plastics experts. The complete focus on plastics
means members can share the knowledge and information generated
from many years of experience in all areas of the polymer industry.
Our commitment is to helping clients find effective solutions, actively,
quickly, creatively and at minimal cost.
PCN members can work as individuals or in project teams, the PCN
exists to enable your project, however large or small to be accurately
directed at the most appropriate consultant.
To find out more about how the PCN can help you or to apply for
membership, visit the PCN website at www.pcn.org.
The essential support team is available to you today.
19. What we do (at a glance)
• Graham Chetwood: Cost reduction from improved purchasing.
• Terence Cooper: Bioplastics, sustainable packaging, recycling &
recovery.
• Peter Cox: Extrusion & multi-layered plastics.
• Peter Cracknell: High-quality on site polymer training &
consultancy services.
• Gerhard Crossman: Turnaround & process improvements,
change management.
• John Duncan: Thermal, dynamic mechanical & dielectric
analysis.
• Keith Freegard: Recycling and environmental
• John Gearing: Thermal testing.
• John Gibbins: Recycling from materials to equipment.
• Sarah Greenwood: Packaging.
• Trevor Hutley: Global polymer industry, research & innovation
advisor.
• Michail Kalloudis: Testing, research/development & failure
analysis.
• Robin Kent: Energy surveys & energy management.
• Pravin Mistry: Global: mergers & acquisitions, recruitment,
chairman, SHEQ systems.
• Mike Newey: Extrusion specialist, tool design and training.
• Jeremy Pingstone: Injection moulding. Education, skills &
apprenticeships.
• Fabrizio Rizzato: Thermoset polyurethanes from chemistry to
equipment.
• Eddie Sheridan: Market research, materials, packaging &
improvement.
• Bernard Sinclair: Product design.
• Robert Tomlinson: Providing solutions to processing problems.