This document provides a catalog of wood profiles including casing, base, crowns, and other trim profiles. It lists profile names, product codes, materials (primed MDF, hemlock, FJ primed pine), and dimensions. It also provides some guidance on finishing, storing, and handling woodwork to protect it from moisture and sunlight. Profiles listed in black text are in stock, while grey text profiles may require 1-2 weeks lead time.

2. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale. 1
Table of Contents
Service - Quality - Integrity
Primed MDF, Hemlock & FJ
Primed Pine
Casing .................................... 2-5
Base........................................ 6-8
Crowns.................................. 9-10
Chair Rails................................ 11
Hand Rails................................ 11
Trims ........................................ 12
Rounds..................................... 13
Outside Corners........................ 13
Coves....................................... 14
Stops........................................ 14
OG & Moulded Batten............... 14
Bullnose, Lattice & Screen........... 15
Squares.................................... 15
Miscellaneous ........................... 16
Finish Lumber............................ 17
Unfinished woodwork is vulnerable! Apply
finish as soon as possible following the
manufacturer’s finishing instructions.
Never expose unpainted millwork to direct
sunlight!
Always protect unfinished millwork from
moist conditions. Never store on the ground,
on concrete, or where rain can blow in.
All mouldings should be stored horizontally
off the floor and in a dry location
It’s critical to protect millwork from direct sunlight prior
to finishing to avoid rapid drying and bleaching. Even
a few hours exposure to direct sunlight causes drying
and bleaching. Millwork must be stored in a dry area
away from excess heat. Never store on the ground, nor
allow wood to come into direct contact with concrete.
The natural tendency of concrete to absorb moisture
can create a “wicking” of moisture out of the air or the
ground and into the wood.
Mouldings must be acclimated
72 hours prior to installation, mouldings should be
unbundled and allowed to acclimate to the environment
in the room in which they will be installed, with a
controlled humidity level. The humidity at the time of
acclimation should be similar to the humidity expected
upon occupancy of the project.
Finishing
Light sanding is required prior to finishing. Follow
manufacturer’s recommended instructions for your
product type.
Care and handling of Millwork
Hardwoods
Casing ................................ 18-19
Base.................................... 20-21
Crowns..................................... 22
Bullnose.................................... 23
Squares.................................... 23
Quarter Rounds ........................ 23
Miscellaneous ...................... 24-25
Components.............................. 26
Components FJ Veneer............... 27
Finish Lumber............................ 28
Patterns .................................... 28
Radius Base Corners.................. 29
Rosettes .................................... 30
Plinth Blocks.............................. 30
Corners .................................... 30
Build - Up Suggestions............... 31
Index................................... 32-36

3. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
2
5020 Architrave
Primed MDF - F625020
1-1/8 x 5-1/4
Hemlock - H5020A
1-1/8 x 5-1/4
5000 Architrave
Primed MDF - F625000
1-1/4 x 3-3/4
Hemlock - H5000
1-3/16 x 3-3/4
1254 Architrave
Hemlock - H125475
1-1/4 x 4-3/4
410
Primed MDF - F620410
11/16 x 2-1/4
411
Primed MDF - F621411
3/4 x 3
Hemlock - H411
3/4 x 3
388
Primed MDF - F620388
11/16 x 3-1/4
49
Primed MDF - F520049
1 x 3-1/4
190 Traditional
Hemlock - H190
11/16 x 2-1/4
FJ Primed Pine - P320190
5/8 x 2-1/4
195 Traditional
Hemlock - H195
5/8 x 3-1/4
535
Primed MDF - F621535
3/4 x 3-1/2
Hemlock - H535
3/4 x 3-1/2
Primed MDF - Hemlock - FJ Primed Pine
Casing

4. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
3
120 Colonial
Hemlock - H120
9/16 x 2-1/4
002
Primed MDF - F620002
5/8 x 2-1/4
003
Primed MDF - F620003
11/16 x 3-1/4
FJ Primed Pine - P320150
5/8 x 3-1/4
444 Colonial
Primed MDF - F620444
9/16 x 3-1/8
Hemlock - H444
5/8 x 3-1/4
FJ Primed Pine - P620444A
5/8 x 3-1/8
Knotty Pine - P720444
5/8 x 3-1/4
3005 Beaded
Hemlock - H3005
1/2 x 1-1/2
FJ Primed Pine - P323005
1/2 x 1-9/16
350 Beaded
Hemlock - H350
9/16 x 2-1/4 312 Beaded
Primed MDF - F620312
5/8 x 3
233
Primed MDF - F620233
9/16 x 3-1/4
2000C Colonial
Hemlock - H2000C
11/16 x 2-1/2
2150 Casing
Hemlock - H2150
5/8 x 3-1/4
Primed MDF - F6202150
5/8 x 3-1/4
Primed MDF - Hemlock - FJ Primed Pine
Casing

5. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
4
3000 Bevel
Hemlock - H3000
1/2 x 1-1/2
FJ Primed - P323000
7/16 x 1-7/16
Golden Oak - DC300014GO
7/16 x 1-1/2
3002 Bevel
Hemlock - H3002
1/2 x 2-1/4
FJ Primed Pine - P323002
9/16 x 2-1/4
Golden Oak - DC300214GO
7/16 x 2-1/4
356 Colonial
Primed MDF - F620356
9/16 x 2-1/4
Hemlock - H356WM
5/8 x 2-1/4
FJ Primed Pine - P621356
5/8 x 2-1/4
Knotty Pine - P720356
5/8 x 2-1/4
Hemlock - H356VG
5/8 x 2-1/4
110 Sanitary
Hemlock - H110
9/16 x 1-1/2
130 Sanitary
Hemlock - H130
9/16 x 2-1/4
158 Bevel
Primed MDF - F620158
9/16 x 1-9/16
214 Bevel
Primed MDF - F620214
9/16 x 2-1/4
324 Bevel
Hemlock - H324WM
11/16 x 2-1/4
3014 Streamline
Hemlock - H3014
7/16 x 2-1/4
327 Streamline
Hemlock - H327
5/8 x 2-1/4
111 Victorian
Hemlock - H111
13/16 x 3-1/4
200 Victorian
FJ Primed Pine - P320200
5/8 x 3-1/2
19 Moulded
Primed MDF - F620019
9/16 x 2-1/4
Hemlock - H19
9/16 x 2-1/4
32 Step
FJ Primed Pine - P320032
5/8 x 2-1/4
34 Step
FJ Primed Pine - P320034
5/8 x 3-1/4
102 Step
Hemlock - H102
9/16 x 2-1/4
Primed MDF - Hemlock - FJ Primed Pine
Casing

6. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
5
1208 Beaded
Hemlock - H1208
11/16 x 2-1/2
FJ Primed Pine - P321208
11/16 x 2-1/2
140 Moulded
Hemlock - H140
5/8 x 2-1/2
FJ Primed Pine - P320140
5/8 x 2-1/2
338 Howe
Primed MDF - F620338
1 x 3-1/4
472 E2E Bullnose
Hemlock -VG - H472VG
5/8 x 2-1/4
473 E2E Bullnose
Primed MDF - F620473
9/16 x 2-1/4
494 E2E Bullnose
Primed MDF - F620494
1/2 x 3-1/4
495 E2E Bullnose
Hemlock - VG - H495VG
5/8 x 3-1/4
Primed MDF - F520495
11/16 x 3-1/2
CVG Fir - F120495
5/8 x 3-1/2
100 E2E Bullnose
Hemlock - H100D
9/16 x 1-1/2
1 E2E Bullnose
Hemlock - H1
7/16 x 2-1/4
175 E2E Bullnose
Hemlock - H175
1/2 x 2-1/4
Hemlock - H175VG
1/2 x 2-1/4
908 Reed
Primed MDF - F620908
9/16 x 3-1/2
1000 Fluted
Primed MDF - F421000
5/8 x 3-3/8
1001 Fluted & Reed
Hemlock - H1001
11/16 x 3-1/4
3125 Fluted & Reed
FJ Primed Pine - P323125
9/16 x 3-1/4
3130 Fluted & Reed
FJ Primed Pine - P323130
9/16 x 2-1/4
Primed MDF - Hemlock - FJ Primed Pine
Casing

7. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
6
Base
234
Primed MDF - F610234
9/16 x 5-1/2
412 Cambridge
Primed MDF - F610412
9/16 x 4-1/2
243
Primed MDF - F610243
1/2 x 4-1/4
211 Victorian
Hemlock - H211
3/4 x 4-1/4
326
Primed MDF - F610326
9/16 x 3-3/8
545
Primed MDF - F611545
5/8 x 5
Hemlock - H545
11/16 x 5
208
FJ Primed Pine - P310208
9/16 x 3-1/4
3000C Colonial
Hemlock - H3000C
5/8 x 3-1/4
Primed MDF - Hemlock - FJ Primed Pine

8. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
7
Base
6688
Primed MDF - F6106688
9/16 x 6-1/4
618 Moulded
Primed MDF - F610618
9/16 x 5-1/4
Hemlock - H618
1/2 x 5-1/4
FJ Primed Pine - P610618
9/16 x 5-1/4
285
Hemlock - H285VG
1/2 x 5-1/4
625 Moulded
Hemlock - H625
7/16 x 2-1/4
FJ Primed Pine - P310625
7/16 x 2-1/4
623 Moulded
Primed MDF - F610623
1/2 x 3-1/4
FJ Primed Pine - P310623A
7/16 x 3-1/4
Hemlock - H623
7/16 x 3-1/4
Knotty Pine - P710623
1/2 x 3-1/4
622 Moulded
Primed MDF - F610622
1/2 x 2-1/2
260 Colonial
Hemlock - H260
3/8 x 3-1/4
653 Gingerbread
Hemlock - H653
7/16 x 3-1/4
FJ Primed Pine - P310653
3/8 x 3-1/4
663 Gingerbread
Hemlock - H663
7/16 x 4-1/4
673 Gingerbread
Hemlock - H673
7/16 x 5-1/4
714 Gingerbread
FJ Primed Pine - P310714
9/16 x 4-1/8
716 Gingerbread
FJ Primed Pine - P310716
9/16 x 4-5/8
Primed MDF - Hemlock - FJ Primed Pine

9. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
8
Base
218 Sierra
Primed MDF - F610218
9/16 x 5-1/4
714 Sierra
Primed MDF - F610714
9/16 x 7-1/4
215 Sierra
Primed MDF - F610215
1/2 x 3-1/8
261 Single Bullnose
Primed MDF - F610261
1/2 x 3-1/4
473 Single Bullnose
Hemlock-VG - H473VG
1/2 x 3-1/2
496 Single Bullnose
Hemlock-VG - H496VG
9/16 x 5-3/8
CVG Fir - F110496
9/16 x 5-3/8
230 Combo
Hemlock - H230
5/8 x 2-1/4
41 Streamline
Hemlock - H41
7/16 x 2-1/4
250 Streamline
Hemlock - H250
7/16 x 2-1/2
3102 Streamline
Hemlock - H3102
7/16 x 3-1/4
210 Sanitary
Hemlock - H210
3/8 x 1-1/2
240 Sanitary
Hemlock - H240
3/8 x 2-1/4
515 Sanitary
Hemlock - H515
1/2 x 1-9/16
Primed MDF - Hemlock - FJ Primed Pine

10. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
9
Crowns
47
FJ Primed Pine - P340047
5/8 x 4-3/4
54
Hemlock - H54
1/2 x 2-1/4
FJ Primed Pine - P330054
9/16 x 2-1/4
49
Primed MDF - F630049
9/16 x 3-5/8
Hemlock - H49
1/2 x 3-1/4
FJ Primed Pine - P330049
9/16 x 3-5/8
50
Hemlock - H50
1/2 x 3-7/16
48
Primed MDF - F630048
9/16 x 4-1/4
Hemlock - H48
1/2 x 4-1/4
47A
FJ Primed Pine - P330047A
9/16 x 4-5/8
46
Primed MDF - 9/16 x
5-1/4
F630046
51
FJ Primed Pine - P330051
9/16 x 3-1/4
75 Bed Mould
Hemlock - H75
1/2 x 1-5/8
311 Bed Mould
Hemlock - H311
1/2 x 2-5/8
248
FJ Primed Pine - P333248
1-1/4 x 2-1/4
3242
Hemlock - H3242
1/2 x 11/16
3244
Hemlock - H3244
9/16 x 1-1/4
FJ Primed Pine - 5/8 x 1-1/4
P333244
3248
FJ Primed Pine - P333248
1-1/4 x 2-1/4
Primed MDF - Hemlock - FJ Primed Pine

11. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
10
Crowns
413
Primed MDF - F630413
1-1/4 x 6-5/16
412
Primed MDF - F630412
5/8 x 4-1/2
417
Primed MDF - F630417A
1-1/4 x 3-7/8
911 Lintel Mould
Hemlock - H911D
1-1/4 x 2-1/4 912 Lintel Mould
Primed MDF - F520912
1-1/2 x 2-1/4
712 Classic Crown
FJ Primed Pine - P330712
11/16 x 4-1/2
Primed MDF - Hemlock - FJ Primed Pine

12. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
11
Chair Rails
390
Hemlock - H390
5/8 x 2-7/16
FJ Primed Pine - P330390
11/16 x 2-5/8
297
Primed MDF - F533297
11/16 x 3 397
Primed MDF - F633397
1 x 3-1/2
Hand Rails
3507
Hemlock - H3507
1-1/16 x 2-1/4
231
Hemlock - H231
1-7/16 X 1-5/8
Primed MDF - Hemlock - FJ Primed Pine

13. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
12
Trims
352 Corners
FJ Primed Pine - P340352
90 Degree
45 Corners
FJ Primed Pine - P340045
45 Degree
1030 Drip Cap
Hemlock - H1030
3/4 x 1-5/8
1031 Drip Cap Water Table
Hemlock - H1031
1-3/8 x 3 180 Brickmould
Hemlock - H180
1-3/16 x 2
FJ Primed Pine - P320180
1-1/4 x 2
CVG Fir - F120180
1-1/4 x 2
440 Shingle Mould
Hemlock - H440
5/8 x 1-1/2
442 Shake Mould
Hemlock - H442
1-1/4 x 2-1/4
FJ Primed Pine - P320442
1-1/4 x 2-1/4
953 Opening Trim
Hemlock - H953WM
7/16 x 1-5/16
FJ Primed Pine - P350953
7/16 x 1-3/8
Primed MDF - F530953
7/16 x 1-5/16
1020 I.S. Back Band
Hemlock - H1020
3/4 x 1-1/16
1021 O.S. Back Band
Hemlock - H1021
1-1/16 x 1-1/16
Primed MDF - Hemlock - FJ Primed Pine

14. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
13
Rounds
Outside Corners
3222 Full Round
Hemlock - H3222
11/16 Dia.
3226 Full Round
Hemlock - H3226
1-5/16 Dia.
3228 Full Round
Hemlock - H3228
1-1/2 Dia.
3202 Quarter Round
Hemlock - H3202
1/2 x 1/2
3206 Quarter Round
Hemlock - H3206
11/16 x 11/16
325 Quarter Round
Hemlock - H325
1 x 1
106 Quarter Round
FJ Primed Pine- P340106
11/16 x 11/16
3200 Quarter Round
Hemlock - H3200
1/4 x 1/4
3201 Quarter Round
Hemlock - H3201
3/8 x 3/8
108 Quarter Round
FJ Primed Pine - P340108
1/2 x 1/2
3288 Base Shoe
Hemlock - H3288
7/16 x 11/16
126 Base Shoe
FJ Primed Pine - P310126
1/2 x 3/4
3212 Half Round
Hemlock - H3212
5/16 x 3/4
3280 OS Corner
Hemlock - H3280
1-1/16 x 1-1/16
204 OS Corner
Hemlock - H204
1-1/4 x 1-1/4
3282 OS Corner
Hemlock - H3282
11/16 x 11/16
205 OS Corner
FJ Primed Pine - P340205
1-1/8 x 1-1/8
206 OS Corner
FJ Primed Pine - P340206
3/4 x 3/4
202 OS Corner
Hemlock - H202
1-1/16 x 1-1/16
FJ Primed Pine - P340202
1-1/16 x 1-1/16
Primed MDF - Hemlock - FJ Primed Pine

15. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
14
Coves
334
Hemlock - H334
1/2 x 1-1/2
3260
Hemlock - H3260
1/2 x 1/2
3264
Hemlock - H3264
11/16 x 11/16
93
FJ Primed Pine - P340093
3/4 x 3/4
85
FJ Primed Pine - P340085
9/16 x 1-3/4
305
Hemlock - H305
5/8 x 2-5/8
306
Hemlock - H306
5/8 x 3-1/2
Stop, OG & Moulded Batten
417 OG Stop
Hemlock - H417
3/8 x 3/4
418 OG Stop
Hemlock - H418
7/16 x 1-1/8
419 OG Stop
Hemlock - H419
7/16 x 1-5/16
420 OG Stop
Hemlock - H420
7/16 x 1-5/8
936 OG Stop
Hemlock - H936
3/8 x 1-3/8
FJ Primed Pine - P350936
7/16 x 1-3/8
1050 Moulded Batten
Hemlock - H1050
3/8 x 1-5/16
Primed MDF - Hemlock - FJ Primed Pine

16. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
15
Bullnose & Squares
869 Bullnose Stop
Hemlock - H869
7/16 x 1-1/16
866 Bullnose Stop
Hemlock - H866
7/16 x 1-5/16
865 Bullnose Stop
Hemlock - H865
7/16 x 1-1/2
413 Bullnose Stop
Hemlock - H413
7/16 x 1-5/8
887 Bullnose Stop
Hemlock - H887
3/8 x 1-1/4
FJ Primed Pine - P350887
3/8 x 1-1/4
3422 Bullnose Stop
Hemlock - H3422
5/16 x 1-3/16
425 Garage Door Stop
Hemlock - H425
9/16 x 2-1/4
142 Screen Flat
FJ Primed Pine - P340142
1/4 x 3/4
254 Parting Strip
FJ Primed Pine - P340254
1/2 x 3/4
268 Lattice
Hemlock - H268
1/4 x 1-1/8
267 Lattice
Hemlock - H267
1/4 x 1-3/8
FJ Primed Pine - P340267
9/32 x 1-3/8
266 Lattice
Hemlock - H266
1/4 x 1-5/8
264 Lattice
Hemlock - H264
1/4 x 2-1/4
3274 Screen Flat
Hemlock - H3274
1/4 x 3/4
3516 Square
Hemlock - H3516
11/16 x 11/16
3517 Square
Hemlock - H3517
1-1/16 x 1-1/16
3428 Parting Strip
Hemlock - H3428
7/16 x 11/16
13 Beaded Screen
Hemlock - H13
1/4 x 3/4
Primed MDF - Hemlock - FJ Primed Pine

17. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
16
Miscellaneous
300C Wainscot Cap
Primed MDF - F490300C
3/4 x 2
292 Wainscot Cap
Hemlock - H292
9/16 x 1-1/8
163 Base Cap
Hemlock - H163
11/16 x 1-3/8
Primed MDF - F510163
11/16 x 1-3/8
701 Panel Cap
Hemlock - H701
5/8 x 1-1/4
182 Panel Mould
Hemlock - H182
9/16 x 1-1/2
995 Cant Strip
Solid Pine - P190995
3/4 x 3/4
696 Window Stool
Primed MDF - F670696
11/16 x 6-9/16
703 Floor Cap
Hemlock - H703
1/2 x 3/4
1010 Picture Mould
Hemlock - H1010
11/16 x 1-5/8
954 Window Stop
Primed MDF - F540954
5/8 x 1-5/16
Hemlock - H954
1/2 x 1-1/8
1130 Panel Mould
Hemlock - H1130
1/2 x 1
T & G Paneling
Hemlock - HBP5804
5/8 x 3-3/8
705 Base Cap
Hemlock - H705
3/4 x 1-1/8
Primed MDF - Hemlock - FJ Primed Pine

18. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
17
Finish Lumber
Size Lengths Code
1/2 X 4 16’ F660124
1/2 X 6 16’ F660126
1/2 X 8 16’ F660128
1 X 2 8’, 10’, 12’, 16’ F661102
1 X 3 8’, 10’, 12’, 16’ F661103
1 X 4 8’, 10’, 12’, 16’ F661104
1 X 5 8’, 10’, 12’, 16’ F661105
Size Lengths Code
1 X 6 8’, 10’, 12’, 16’ F661106
1 X 7 8’, 16’ F661107
1 X 8 8’, 10’, 12’, 16’ F661108
1 X 10 8’, 10’, 12’, 16’ F661110
1 X 12 8’, 10’, 12’, 16’ F661112
5/4 x 4 16’ F660544
5/4 x 6 16’ F660546
5/4 x 8 16’ F660548
PRIMED MDF:
VG S4S - C BTR
SIZE CODE SIZE CODE SIZE CODE SIZE CODE
1 x 2
1 x 3
1 x 4
1 x 5
1 x 6
1 x 7
HBCVG102
HBCVG103
HBCVG104
HBCVG105
HBCVG106
HBCVG107
1 x 8
1 x 10
1 x 12
5/4 x 6
5/4 x 8
HBCVG108
HBCVG110
HBCVG112
HBCVG546
HBCVG548
1/4 X 4
1/4 X 6
1/2 x 4
1/2 x 6
1 x 2
1 x 3
1 x 4
H104MC
H106MC
HBCB.504
HBCB.506
HBCB102
HBCB103
HBCB104
1 x 5
1 x 6
1 x 8
1 x 10
1 x 12
2 x 2
HBCB105
HBCB106
HBCB108
HBCB110
HBCB112
HBCD202
MGS4S - C BTR MIX GRAIN
HEMLOCK FINISH:
C BTR VERTICAL GRAIN
1 x 2 FVGC102 2 x 3 FVGC203
1 x 3 FVGC103 2 x 4 FVGC204
1 x 4 FVGC104 2 x 6 FVGC206
1 x 5 FVGC105 2 x 8 FVGC208
1 x 6 FVGC106 2 x 10 FVGC210
1 x 8 FVGC108 2 x 12 FVGC212
1 x 10 FVGC110
1 x 12 FVGC112
C Btr Mix Grain
2 x 2 FMGC202
4 x 4 FMGC404
T & G Flooring
1 x 4 FVGTG104
C Btr Vertical Grain
1/2 x 4 FVGC.504 5/4 x 4 FVGC5404
1/2 x 6 FVGC.506 5/4 x 6 FVGC5406
1/2 x 8 FVGC.508 5/4 x 8 FVGC5408
S4S BOARDS: VG FIR FINISH:
SIZE CODE LENGTHS
1 x 3
1 x 4
1 x 5
1 x 6
1 x 8
1 x 10
1 x 12
F460103
F460104
F460105
F460106
F460108
F460110
F460112
16’
16’
16’
16’
16’
16’
16’
MDF REGULAR:
SIZE CODE LENGTHS
1 x 2
1 x 3
1 x 4
1 x 5
1 x 6
1 x 8
1 x 10
1 x 12
P36310216
P36310316
P36310416
P36310516
P36310616
P36310816
P36311016
P36311216
16’
16’
16’
16’
16’
16’
16’
16’
FJ PRIMED PINE:
SIZE CODE SPECIE
1 x 4
1 x 4
1 x 5
1 x 5
1 x 6
1 x 6
1 x 7
1 x 8
1 x 8
DCBD104GO
DCBD104SO
DCBD105GO
DCBD105SO
DCBD106GO
DCBD106SO
DCBD107GO
DCBD108GO
DCBD108SO
GOLDEN OAK
STRAND OAK
GOLDEN OAK
STRAND OAK
GOLDEN OAK
STRAND OAK
GOLDEN OAK
GOLDEN OAK
STRAND OAK
PREFINISHED S4S:
Primed MDF - Hemlock - FJ Primed Pine

19. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
18
16
Cherry - C120016
3/4 x 3-1/2
Knotty Alder - A120016K
3/4 x 3-1/2
Maple - M820016
3/4 x 3-1/2
39
Cherry - C120039
11/16 x 3-1/4
Knotty Alder - A120039K
11/16 x 3-1/4
Maple - M820039
11/16 x 3-1/4
60
Cherry - C120060
3/4 x 3
Knotty Alder - A120060K
3/4 x 3
Maple - M820060
3/4 x 3
65
Knotty Alder - A120065K
13/16 x 3-1/4
Maple - M820065
13/16 x 3-1/4
62
Cherry - C120062
3/4 x 2-3/4
Knotty Alder - A120062K
3/4 x 2-3/4
Maple - M820062
3/4 x 2-3/4
57
Cherry - C120057
7/8 x 3-1/2
Knotty Alder - A120057K
7/8 x 3-1/2
Maple - M820057
7/8 x 3-1/2
1403
Knotty Alder - A121403K
5/8 x 3-1/4
Casing

20. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
19
312 Beaded
Knotty Alder - A120312K
11/16 x 3
535
Knotty Alder - A120535K
11/16 x 3-1/2
1002
Knotty Alder - A121002K
5/8 x 2-1/4
1003
Knotty Alder - A121003K
5/8 x 3-1/4
495
Knotty Alder - A120495K
1 x 4
356 Colonial
Oak Veneer - O320356
1/2 x 2-3/16
Golden Oak - DC35614GO
7/16 x 2-1/4
Strand Oak - DC35614SO
7/16 x 2-1/4
Knotty Alder - A120356K
11/16 x 2-1/4
Oak - O120356
1/2 x 2-1/4
444 Colonial
Oak Veneer - O320444
5/8 x 3-1/4
F115 Colonial
Oak - O120115
1/2 x 2-1/4
5475 Architrave
Knotty Alder - A125475K
1-1/16 x 4-3/4
324 Bevel
Oak Veneer - O320324
1/2 x 2-1/4
Oak - O120324B
1/2 x 1-9/16
Oak - O120324
1/2 x 2-1/4
307 Bevel
Oak Veneer - O320307
1/2 x 1-1/2
F113 Bevel
Oak - O120113
7/16 x 2-1/4
5575 Architrave Modified
Knotty Alder - A125575K
1-1/16 x 5-3/4
Casing

21. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
20
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
20
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
HH ddd ddddHH ddd dddd
Service - Quality - Integrity
20
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
20
Base
620
Knotty Alder - A110620K
9/16 x 4-1/4
Maple - M810620
9/16 x 4-1/4
85
Cherry - C110085
3/4 x 4-1/4
Knotty Alder - A110085K
3/4 x 4-1/4
Maple - M810085
3/4 x 4-1/4
90
Cherry - C110090
9/16 x 4-1/2
Knotty Alder - A110090K
9/16 x 4-1/2
Maple - M810090
9/16 x 4-1/2
633 O.G. Colonial
Oak Veneer - O310633
1/2 x 3-1/4
634 O.G. Colonial
Oak - O110634
3/8 x 2-3/4
724 Streamline
Oak - O110724
3/8 x 2-3/4
623
Knotty Alder - A110623K
1/2 x 3-1/4
618
Knotty Alder - A110618K
1/2 x 5-1/4

22. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
21
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
21
Service - Quality - Integrity
HHHHH dddd ddHHHHH dddd dd
Service - Quality - IntegrityService - Quality - Integrity
49
Cherry - C110B49
9/16 x 4-1/4
Knotty Alder - A110B49K
9/16 x 4-1/4
Maple - M810B49
9/16 x 4-1/4
31
Cherry - C110B31
9/16 x 4-1/4
Knotty Alder - A110B31K
9/16 x 4-1/4
Maple - M810B31
9/16 x 4-1/4
545
Knotty Alder - A110545K
5/8 x 5
412 Victorian
Knotty Alder - A110412K
9/16 x 4-1/2
400
Knotty Alder - A112400K
5/8 x 4
1013
Knotty Alder - A111013K
1/2 x 3-1/4
1015
Knotty Alder - A111015K
1/2 x 5-1/4
1414
Knotty Alder - A111414K
1/2 x 4-1/4
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale. 21
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale. 21
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale. 21
Base

23. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
22
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
HH ddd dddd
Service - Quality - Integrity
22
Crowns
911 Lintel Mould
Knotty Alder - A140911K
1-1/4 x 2-1/4
514
Knotty Alder - A130514K
1-1/4 x 5-1/4
1045
Knotty Alder - A131045K
11/16 x 5-1/4
1048
Knotty Alder - A131048K
11/16 x 4-1/4
51
Oak Veneer - O330051
9/16 x 3-1/4
Knotty Alder - A131051K
11/16 x 3-1/4
637- Crown
Oak - O130637
3/4 x 5-1/4
638- Dentil
Oak - O130638
5/8 x 1

24. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
23
HHHHH dddd dd
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
23
Miscellaneous
239 Square
Oak - O160239
3/4 x 3/4
520 Flat Screen
Oak - O140520
1/4 x 3/4
430 Flat Screen
Knotty Alder - A140430K
1/4 x 3/4
661 Quarter Round
Oak - O140661
3/4 x 3/4
662 Quarter Round
Oak - O140662
1/2 x 1/2
105 Quarter Round
Superior Alder - A140105S
3/4 x 3/4
111 Quarter Round
Superior Alder - A140111S
5/16 x 5/16
200 Base Shoe
Oak - 0110200
7/16 x 3/4

25. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
24
Miscellaneous
953 Opening Trim
Superior Alder - A150953S
1/2 x 1-3/8
180 Brickmould
Knotty Alder - A120180K
1-1/4 x 2
Cherry - C120180
1-1/4 x 2
329 Counter Edge
Oak - O193290
3/8 x 1-1/4
440 Counter Edge
Oak - O190440
3/8 x 1-1/2
4421 Counter Edge
Oak - O1904421
3/8 x 1-3/4
431 Backsplash
Oak -O190431
9/16 x 3-1/2
382 OS Corner
Knotty Alder - A140382
1-1/4 x 1-1/4
651 OS Corner
Oak - O140651
3/4 x 3/4
652 OS Corner
Oak - O140652
1-1/6 x 1-1/6
1518 Backband
Cherry - C1201518
1-1/2 x 1-1/8
Knotty Alder - A121518K
1-1/2 x 1-1/8
Maple - M8201518
1-1/2 x 1-1/8

26. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
25
Miscellaneous
20 Wainscot Cap
Oak - O140020
5/8 x 1-3/4
705 Panel Cap
Knotty Alder - A140705K
3/4 x 1-1/8
101 Wainscot Cap
Oak - O190101
15/16 x 1-5/8
601 Cove
Oak - O140601
3/4 x 3/4
93 Cove
Superior Alder - A140093S
3/4 x 3/4
703 Floor Cap
Knotty Alder - A140703K
1/2 x 3/4 451 Lip Moulding
Oak - O140451
3/4 x 1-1/4

27. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
26
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
HH ddd dddd
Service - Quality - Integrity
26
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey.
Components Hardwoods
887 Bullnose Stop
Mahogany - M877
3/8 x 1-1/4
Oak Veneer - O350887
3/8 x 1-1/4
Cherry - C15088770
7/16 x 1-1/4
Maple - M85088770
7/16 x 1-1/4
774 Solid Stop
Maple - M85077470
1/2 x 1-11/16
Cherry - C15077480
1/2 x 1-11/16
Maple - M85077480
1/2 x 1-11/16
1-3/4 Kerfed Ext. Astragal
Cherry - C190130807
1-5/16 x 7
Cherry - C190130808
1-5/16 x 8
Knotty Alder - DFASTSKKA8
1-5/16 x 8
Interior Astragal
Superior Knotty Alder - DFASTSKA8
1-3/8 x 8
Cherry - C19013808
1-3/8 x 8
Knotty Alder - DFASTKA
1-3/8 X 8
866 Bullnose Stop
Knotty Alder - A150866K
1/2 x 1-3/8
301 Bullnose Stop
Oak - O150301
3/8 x 1-1/16
936 Colonial Stop
Knotty Alder - A150936K
1/2 x 1-3/8

28. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
27
HHHHH dddd dd
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
27
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey.
Components FJ Veneer
774 Stop
Cherry - CV5077407
1/2 x 1-11/16 x 86
Maple - MPV5077407
1/2 x 1-11/16 x 86
Alder Select - ASV5077407
1/2 x 1-11/16 x 86
Cherry - CV5077408
1/2 x 1-11/16 x 99
Maple - MPV5077408
1/2 x 1-11/16 x 99
Fir - FV5077408
1/2 x 1-11/16 x 99
916 Stop
Cherry - CV5091607
3/8 x 1-3/8 x 86
Maple - MPV5091607
3/8 x 1-3/8 x 86
Fir - FV5091607
3/8 x 1-3/8 x 86
Alder Select - ASV5091607
3/8 x 1-3/8 x 86
180 Brickmould
Meranti - MV20180
1-1/4 x 2
887 Stop
Cherry - CV5088707
7/16 x 1-1/4 x 86
Maple - MPV5088707
7/16 x 1-1/4 x 86
Oak Veneer - O350887
3/8 x 1-1/4
Strand Oak - DCSTP
3/8 x 1-1/4
Golden Oak - DCSTP
3/8 x 1-1/4
Cherry - CV5088708
7/16 x 1-1/4 x 99
Maple - MPV5088708
7/16 x 1-1/4 x 99
Fir - FV5088707
7/16 x 1-1/4 x 86
Alder Select - ASV5088707
7/16 x 1-1/4 x 86
937 Stop
Cherry - CV5093707
3/8 x 1-3/8 x 86
Maple - MPV5093707
3/8 x 1-3/8 x 86
Fir - FV5093707
3/8 x 1-3/8 x 86
Alder Select - ASV5093707
3/8 x 1-3/8 x 86

29. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
28
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
HH ddd dddd
Service - Quality - Integrity
28
Finish Lumber
Description Dimensions Lengths Code
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
Knotty Alder S4S
1 x 3
1 x 4
1 x 5
1 x 6
1 x 8
1 x 10
1 x 12
5/4 x 4
5/4 x 5
5/4 x 6
5/4 x 8
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
6 - 10 R/L
A160103K
A160104K
A160105K
A160106K
A160108K
A160110K
A160112K
A160544K
A160545K
A160546K
A160548K
Description Dimensions Lengths Code
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
S4S Oak
1 x 2
1 x 3
1 x 4
1 x 5
1 x 6
1 x 8
1 x 10
1 x 12
2 x 2
2 x 4
2 x 6
6, 8, 10, 12
6, 8, 10, 12
6, 8, 10, 12
6, 8, 10, 12
6, 8, 10, 12
6, 8, 10, 12
6, 8, 10, 12
6, 8, 10, 12
8, 10, 12
8, 10, 12
8, 10, 12
O BD102
O BD103
O BD104
O BD105
O BD106
O BD108
O BD110
O BD112
O DI202
O DI204
O DI206
KNOTTY ALDER:
RED OAK SQUARE EDGE:
All Bevel and T&G profiles are Kiln Dried and sold R/L Tally only.
FJ are sold with Trim Backs
Patterns: Pine, Cedar, Hemlock, Knotty Alder & Fir
Ceiling
Hemlock - HBP5804
5/8 x 3-3/8 Ceiling
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey.

30. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
Hardwoods
29
HHHHH dddd dd
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
29
Radius Base Corners
Item # Description For Use With PCS/CTN
H C356BOR
H C356DUL
H C1208BOR
H C444BOR
H C444UL
H C444ABOR
5/8” x 2-1/4” Hemlock Colonial
9/16” x 2-1/4” Paint Grade
11/16: X 2-1/2” Hemlock Colonial
5/8” x 3-1/4” Hemlock Colonial
9/16” x 3-1/8” Paint Grade 3-1/8”
5/8” x 3-1/8” Paint Grade
Hemlock H 356WM, MDF 356, FJ Primed 356
Primed MDF 356
Hemlock H 1208, FJ Primed 1208
Hemlock H 444
Primed MDF 444
FJ Primed 444A
50
50
50
50
50
50
Item # Description For Use With PCS/CTN
H C623BOR
H C623UL
H C716PBOR
7/16” x 3-1/4” Hemlock O.G.
9/16” x 3-1/4” Paint Grade O.G.
9/16” x 4-5/8” Paint Grade Gingerbread
Hemlock H 623
UL 623
FJ Primed 716
50
50
50
3/4” RADIUS BASE CORNERS3/4” RADIUS BASE CORNERS
3/4” RADIUS BASE CORNERS
For applications needing 3/4” RADIUS OS BASE CORNER piece (for casing profiles), we offer:
For applications needing 3/4” RADIUS OS BASE CORNER piece (for base profiles), we offer:
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey.

31. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
30
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.30
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.30
Item # Description For Use With PCS/CTN
H CSCSGSM
H CSCSGM
3/4” x 2-3/4” x 2-3/4” W. Maple
3/4” x 3-1/2” x 3-1/2” W. Maple
Hemlock Stain, Paint Grade
Hemlock Stain, Paint Grade
200
100
Item # Description For Use With PCS/CTN
H CPBM 3/4” x 3-1/2” x 6-1/2” W. Maple Hemlock Stain, Paint Grade 50
Item # Description For Use With PCS/CTN
H CUBI
H CUBO
H CUBOR
3/4” x 7-1/4” Hemlock ISC
3/4” x 7-1/4” Hemlock Square OSC
3/4” x 7-1/4” Hemlock Radius OSC
All Base Profiles
All Base Profiles, 90° OSC Walls
All Base Profiles, 3/4” Radius OSC
100
50
50
ROSETTES
PLINTH BLOCKS
UNIVERSAL INSIDE & OUTSIDE CORNERS
For applications needing ROSETTES, we offer:
For applications needing PLINTH BLOCKS, we offer:
For applications needing UNIVERSAL INSIDE OR OUTSIDE CORNER piece (for base profiles), we offer:
Rosettes, Plinth Blocks & Corners
Illustrations are not to scale.30
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey.

32. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
31
Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale. 31
H912 LINTEL
HBCVG104
H865
H911
LINTEL
HBCVG103
H936
H912
LINTEL
HBCVG104
H936
410 Colonial Casing - 11/16” x 2-1/4”
473 Bullnose Casing - 11/16” x 2-1/4”
3212 Half Round - 3/4”
49 Casing - 1” x 3-1/4”
887 Stop - 7/16” x 1-1/4”
218 Sierra Base - 9/16” x 5-1/4”
49 Colonial Crown - 9/16” x 3-5/8”
215 Sierra Base - 1/2” x 3-1/8”
1 x 3 primed E2E - 11-1/16” x 2-1/2”
1 x 10 Primed E2E - 11/16” x 9-1/4”
1 x 3 Primed E2E - 11/16” x 2-1/2”
413 Beaded Crown - 1-1/4” x 6-5/16”
338 Howe Casing 1” x 3-1/4”
Build - Up Suggestions
Chair Rail Build-Ups
Mantel Build-Ups

33. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
32
Index
HEMLOCK
Pattern # Profile Page #
1 casing 5
13 beaded screen 15
19 casing 4
41 base 8
48 crown 9
49 crown 9
50 crown 9
54 crown 9
75 crown 9
100 casing 5
102 casing 4
110 casing 4
111 casing 4
120 casing 3
130 casing 4
133 flat astragal 16
140 casing 5
163 base cap 16
175 casing 5
175 vg casing 5
180 brick mould 12
182 panel mould 16
190 casing 2
195 casing 2
202 outside corner 13
204 outside corner 13
210 base 8
211 base 6
230 base 8
231 hand rail 11
240 base 8
250 base 8
260 base 7
264 lattice 15
266 lattice 15
267 lattice 15
268 lattice 15
285 base 7
292 wainscot cap 16
305 cove 14
HEMLOCK
Pattern # Profile Page #
306 cove 14
311 crown 9
324 casing 4
325 quarter round 13
327 casing 4
334 cove 14
350 casing 3
356 casing 4
356 vg casing 4
390 chair rail 11
411 casing 2
413 stop 15
417 o.g. stop 14
418 o.g. stop 14
419 o.g. stop 14
420 o.g. stop 14
425 garage dr stop 15
440 shingle mould 12
442 shake mould 12
444 casing 3
472 casing 5
473 vg base 8
495 vg casing 5
496 vg base 8
515 base 8
535 casing 2
545 base 6
618 base 7
623 base 7
625 base 7
653 base 7
663 base 7
673 base 7
701 panel cap 16
703 floor cap 16
705 base cap 16
865 stop 15
866 stop 15
869 stop 15
887 stop 15
911 lintel 10
HEMLOCK
Pattern # Profile Page #
936 o.g. stop 14
953 opening trim 12
954 window stop 16
1001 casing 5
1010 picture mould 16
1020 back band 12
1021 back band 12
1030 drip cap 12
1031 drip cap 12
1050 batten 14
1130 panel mould 16
1208 casing 5
1254 architrave 2
2000c casing 3
2150 casing 3
3000 casing 4
3000c base 6
3002 casing 4
3005 casing 3
3014 casing 4
3102 base 8
3200 quarter round 13
3201 quarter round 13
3202 quarter round 13
3206 quarter round 13
3212 half round 13
3222 full round 13
3226 full round 13
3228 full round 13
3242 crown 9
3244 crown 9
3260 cove 14
3264 cove 14
3274 screen mould 15
3280 outside corner 13
3282 outside corner 13
3288 base shoe 13
3422 stop 15
3428 parting strip 15
3507 hand rail 11
3516 square 15

34. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
33
Index
HEMLOCK
Pattern # Profile Page #
3517 square 15
5000 architrave 2
5020a architrave 2
1/4 x 4 mg s4s board 17
1/4 x 6 mg s4s board 17
1/2 x 4 mg s4s board 17
1/2 x 6 mg s4s board 17
1 x 2 mg s4s board 17
1 x 2 vg s4s board 17
1 x 3 mg s4s board 17
1 x 3 vg s4s board 17
1 x 4 mg s4s board 17
1 x 4 vg s4s board 17
1 x 5 mg s4s board 17
1 x 5 vg s4s board 17
1 x 6 mg s4s board 17
1 x 6 vg s4s board 17
1 x 7 vg s4s board 17
1 x 8 mg s4s board 17
1 x 8 vg s4s board 17
1 x 10 mg s4s board 17
1 x 10 vg s4s board 17
1 x 12 mg s4s board 17
1 x 12 vg s4s board 17
5/4 x 6 vg s4s board 17
5/4 x 8 vg s4s board 17
2 x 2 mg s4s board 17
t & g panel paneling 16
Primed MDF
Pattern # Profile Page #
002 casing 3
003 casing 3
19 casing 4
46 crown 9
48 crown 9
49 casing 2
49 crown 9
158 casing 4
163 base cap 16
Primed MDF
Pattern # Profile Page #
214 casing 4
215 base 8
218 base 8
233 casing 3
234 base 6
243 base 6
261 base 8
300c wainscot cap 16
312 casing 3
326 base 6
338 casing 5
356 casing 4
388 casing 2
390 chair rail 11
397 chair rail 11
410 casing 2
411 casing 2
412 casing 6
412 crown 10
413 crown 10
417 crown 10
444 casing 3
473 casing 5
494 casing 5
495 casing 5
535 casing 2
545 casing 6
618 casing 7
622 base 7
623 base 7
696 window stool 16
714 base 8
908 casing 5
912 lintel 10
953 opening trim 12
954 window stop 16
1000 casing 5
2150 casing 3
5000 architrave 2
5020 architrave 2
6688 casing 7
Primed MDF
Pattern # Profile Page #
1/2 x 4 s4s board 17
1/2 x 6 s4s board 17
1/2 x 8 s4s board 17
1 x 2 s4s board 17
1 x 3 s4s board 17
1 x 4 s4s board 17
1 x 5 s4s board 17
1 x 6 s4s board 17
1 x 7 s4s board 17
1 x 8 s4s board 17
1 x 10 s4s board 17
1 x 12 s4s board 17
5/4 x 4 s4s board 17
5/4 x 6 s4s board 17
5/4 x 8 s4s board 17
KNOTTY ALDER
Pattern # Profile Page #
16 casing 18
31 base 21
39 casing 18
49 base 21
51 crown 22
57 casing 18
60 casing 18
62 casing 18
65 casing 18
85 base 20
90 base 20
93 cove 25
105 quarter round 23
111 quarter round 23
180 brick mould 24
312 casing 19
356 casing 19
382 outside corner 24
400 base 21
412 base 21
430 screen mould 23

35. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
34
Index
KNOTTY ALDER
Pattern # Profile Page #
495 casing 19
514 crown 22
535 casing 19
545 base 21
618 base 20
620 base 20
623 base 20
703 floor cap 25
705 panel cap 25
866 stop 26
911 lentil mould 22
936 o.g. stop 26
953 opening trim 24
1002 casing 19
1003 casing 19
1013 base 21
1015 base 21
1045 crown 22
1048 crown 22
1403 casing 18
1414 base 21
1518 backband 24
5475 architrave 19
5575 architrave 19
1 x 3 s4s boards 28
1 x 4 s4s boards 28
1 x 5 s4s boards 28
1 x 6 s4s boards 28
1 x 8 s4s boards 28
1 x 10 s4s boards 28
1 x 12 s4s boards 28
5/4 x 4 s4s boards 28
5/4 x 5 s4s boards 28
5/4 x 6 s4s boards 28
5/4 x 8 s4s boards 28
FINGER JOINT PRIMED PINE
Pattern # Profile Page #
003 casing 3
32 casing 4
FINGER JOINT PRIMED PINE
Pattern # Profile Page #
34 casing 4
45 outside corner 12
47 crown 9
47 crown 9
49 crown 9
51 crown 9
54 crown 9
85 cove 14
93 cove 14
106 quarter round 13
108 quarter round 13
126 base shoe 13
140 casing 5
142 screen mould 15
180 brick mould 12
190 casing 2
200 casing 4
202 outside corner 13
205 outside corner 13
206 outside corner 13
208 base 6
248 crown 9
254 parting stop 15
267 lattice 15
297 chair rail 11
352 outside corner 12
356 casing 4
390 chair rail 11
442 shake mould 12
444 casing 3
618 base 7
623 base 7
625 base 7
653 base 7
712 crown 10
714 base 7
716 base 7
887 stop 15
936 o.g. stop 14
FINGER JOINT PRIMED PINE
Pattern # Profile Page #
953 opening trim 12
1208 casing 5
3000 casing 4
3002 casing 4
3005 casing 3
3125 casing 5
3130 casing 5
3244 crown 9
3248 crown 9
1 x 2 s4s boards 17
1 x 3 s4s boards 17
1 x 4 s4s boards 17
1 x 5 s4s boards 17
1 x 6 s4s boards 17
1 x 8 s4s boards 17
1 x 10 s4s boards 17
1 x 12 s4s boards 17
OAK
Pattern # Profile Page #
20 wainscot cap 25
101 wainscot cap 25
113 casing 19
115 casing 19
200 base shoe 23
239 square 23
301 stop 26
324 casing 19
324b casing 19
329 counter edge 24
356 casing 19
431 backsplash 24
440 counter edge 24
451 lip mould 25
520 screen mould 23
601 cove 25
634 base 20
637 crown 22
638 dentil 22

36. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
35
Index
OAK
Pattern # Profile Page #
651 outside corner 24
652 outside corner 24
661 quarter round 23
662 quarter round 23
724 base 20
4421 counter edge 24
1 x 2 s4s boards 28
1 x 3 s4s boards 28
1 x 4 s4s boards 28
1 x 5 s4s boards 28
1 x 6 s4s boards 28
1 x 8 s4s boards 28
1 x 10 s4s boards 28
1 x 12 s4s boards 28
2 x 2 s4s boards 28
2 x 4 s4s boards 28
2 x 6 s4s boards 28
CHERRY
Pattern # Profile Page #
16 casing 18
31 base 21
39 casing 18
49 base 21
57 casing 18
60 casing 18
62 casing 18
85 base 20
90 base 20
180 brickmould 24
774 stop 26
887 stop 26
1518 back band 24
MAPLE
Pattern # Profile Page #
16 casing 18
31 base 21
39 casing 18
49 base 21
57 casing 18
60 casing 18
62 casing 18
65 casing 18
85 base 20
90 base 20
620 base 20
774 stop 26
887 stop 26
1518 back band 24
VG FIR
Pattern# Profile Page#
1/2 x 4 s4s boards 17
1/2 x 6 s4s boards 17
1/2 x 8 s4s boards 17
1 x 2 s4s boards 17
1 x 3 s4s boards 17
1 x 4 s4s boards 17
1 x 4 flooring t & g flooring 17
1 x 5 s4s boards 17
1 x 6 s4s boards 17
1 x 8 s4s boards 17
1 x 10 s4s boards 17
1 x 12 s4s boards 17
5/4 x 4 s4s boards 17
5/4 x 6 s4s boards 17
5/4 x 8 s4s boards 17
2 x 2 s4s boards 17
2 x 3 s4s boards 17
2 x 4 s4s boards 17
2 x 6 s4s boards 17
2 x 8 s4s boards 17
2 x 10 s4s boards 17
2 x 12 s4s boards 17
4 x 4 s4s boards 17

37. Profiles with Black text are in stock at Spokane.
Allow 1-2 weeks for profiles in grey. Illustrations are not to scale.
Service - Quality - Integrity
36
Index
MISC.
Pattern # Profile Specie Page #
51 crown oak veneer 22
180 brick mould v.g. fir 12
180 brick mould mahogany veneer 27
307 casing oak veneer 19
324 casing oak veneer 19
356 casing knotty pine 4
356 casing oak veneer 19
356 casing golden oak 19
356 casing strand oak 19
444 casing knotty pine 3
444 casing oak veneer 19
495 casing v.g. fir 5
496 base v.g. fir 8
623 base knotty pine 7
633 base oak veneer 20
774 stop cherry veneer 27
774 stop maple veneer 27
774 stop select alder veneer 27
774 stop fir veneer 27
887 stop oak veneer 26
887 stop mahogany 26
887 stop cherry veneer 27
887 stop maple veneer 27
887 stop oak veneer 27
887 stop fir veneer 27
887 stop select alder veneer 27
916 stop cherry veneer 27
916 stop maple veneer 27
916 stop fir veneer 27
916 stop select alder veneer 27
937 stop cherry veneer 27
937 stop maple veneer 27
937 stop fir veneer 27
937 stop select alder veneer 27
995 cant strip solid pine 16
3000 casing golden oak 4
3002 casing golden oak 4
1 x 3 s4s boards regular mdf 17
1 x 4 s4s boards golden oak 17
1 x 4 s4s boards strand oak 17
MISC.
Pattern # Profile Specie Page #
1 x 4 s4s boards regular mdf 17
1 x 5 s4s boards golden oak 17
1 x 5 s4s boards strand oak 17
1 x 5 s4s boards regular mdf 17
1 x 6 s4s boards golden oak 17
1 x 6 s4s boards strand oak 17
1 x 6 s4s boards regular mdf 17
1 x 7 s4s boards golden oak 17
1 x 8 s4s boards golden oak 17
1 x 8 s4s boards strand oak 17
1 x 8 s4s boards regular mdf 17
1 x 10 s4s boards regular mdf 17
1 x 12 s4s boards regular mdf 17
Notes