This document is a service manual for TN75FA-TN85FA-TN95FA tractors. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, diagrams, removal and installation instructions, and procedures for inspection and repair. The manual is intended exclusively for use by trained New Holland technicians.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
This article is all about what AI trends will emerge in the field of creative operations in 2024. All the marketers and brand builders should be aware of these trends for their further use and save themselves some time!
A report by thenetworkone and Kurio.
The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).
Trends In Paid Search: Navigating The Digital Landscape In 2024Search Engine Journal
The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands.
It’s important that you’re ready to implement new strategies in 2024.
Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024.
You’ll learn:
- The latest trends in AI and automation, and what this means for an evolving paid search ecosystem.
- New developments in privacy and data regulation.
- Emerging ad formats that are expected to make an impact next year.
Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape.
If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.
5 Public speaking tips from TED - Visualized summarySpeakerHub
From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world.
With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively.
The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage.
Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience.
See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers
See the original article on Forbes here:
http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b
ChatGPT and the Future of Work - Clark Boyd Clark Boyd
Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world.
Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance.
For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age.
Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.
A brief introduction to DataScience with explaining of the concepts, algorithms, machine learning, supervised and unsupervised learning, clustering, statistics, data preprocessing, real-world applications etc.
It's part of a Data Science Corner Campaign where I will be discussing the fundamentals of DataScience, AIML, Statistics etc.
Time Management & Productivity - Best PracticesVit Horky
Here's my presentation on by proven best practices how to manage your work time effectively and how to improve your productivity. It includes practical tips and how to use tools such as Slack, Google Apps, Hubspot, Google Calendar, Gmail and others.
The six step guide to practical project managementMindGenius
The six step guide to practical project management
If you think managing projects is too difficult, think again.
We’ve stripped back project management processes to the
basics – to make it quicker and easier, without sacrificing
the vital ingredients for success.
“If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.”
Dr Andrew Makar, Tactical Project Management
2. INTRODUCTION
– This manual is divided into sections identified by two–figure numbers and each section has independent
page numbering.
For easy reference, these sections have the same numbers and names as the Repairs Rate Book sections.
– The different sections can easily be found by consulting the table of contents on the following pages.
– The document number of the manual and the edition/update dates are given at the bottom of each page.
– Pages updated in the future will be identified by the same document number followed by a two–figure update
number (e.g.: 1st Update 603.54.451.01; 2nd Update 603.54.451.02; etc.) and by the corresponding issue
date.
These pages will be supplemented by a reprint of the updated contents page.
– The information contained in this manual was current on the date printed on each section. As
NEW HOLLAND constantly improves its product range, some information may be out of date subsequent
to modifications implemented for technical or commercial reasons, or to meet legal requirements in different
countries.
In the event of conflicting information, consult the NEW HOLLAND Sales and Service Departments.
IMPORTANT WARNINGS
– All maintenance and repair work described in this manual must be performed exclusively by NEW HOLLAND
service technicians, in strict accordance with the instructions given and using any specific tools necessary.
– Anyone performing the operations described herein without strictly following the instructions is personally
responsible for any eventual injury or damage to property.
– The Manufacturer and all organisations belonging to the Manufacturer’s distribution network, including but
not restricted to national, regional or local distributors, will accept no responsibility for personal injury or dam-
age to property caused by abnormal function of parts and/or components not approved by the Manufacturer,
including those used for maintenance and/or repair of the product manufactured or marketed by the Manu-
facturer.
In any case, the product manufactured or marketed by the Manufacturer is covered by no guarantee of any
kind against personal injury or damage to property caused by abnormal function of parts and/or components
not approved by the Manufacturer.
TEXT AND ILLUSTRATIONS ARE THE PROPERTY OF
CNH ITALIA S.P.A.
No part of the text or illustrations
may be reproduced
PRINTED IN ITALY
CNH ITALIA S.p.A. – Viale delle Nazioni, 55 – 41100 MODENA – Italy
TECHNICAL SUPPORT – Technical Information
Print No. 603.54.451.00 – 01 – 2004 – 200
13. SECTION 00 -- GENERAL GUIDELINES -- CHAPTER 1 1
603.54.451.00 -- 01 -- 2004
GENERAL INSTRUCTIONS
IMPORTANT NOTICE
All maintenance and repair work described in this manual must be performed exclusively by NEW HOLLAND
service technicians, in strict accordance with the instructions given and using any specific tools necessary.
Anyone performing the operations described herein without strictly following the instructions is personally re-
sponsible for any eventual injury or damage to property.
BATTERY
Before carrying out any kind of service operation disconnect and isolate the battery negative lead, unless other-
wise requested for specific operations (e.g.: operations requiring the engine to be running), after which it is
necessary to disconnect the above--mentioned lead to complete the work.
SHIMMING
For each adjustment operation, select adjusting shims and measure individually using a micrometer, then add
up the recorded values. Do not rely on measuring the entire shimming set, which may be incorrect, or the rated
value indicated for each shim.
ROTATING SHAFT SEALS
For correct rotating shaft seal installation, proceed as follows:
-- before assembly, allow the seal to soak in the oil it will be sealing for at least thirty minutes;
-- thoroughly clean the shaft and check that the working surface on the shaft is not damaged;
-- position the sealing lip facing the fluid; with hydrodynamic lips, take into consideration the shaft rotation direc-
tion and position the grooves so that they will deviate the fluid towards the inner side of the seal;
-- coat the sealing lip with a thin layer of lubricant (use oil rather than grease) and fill the gap between the sealing
lip and the dust lip on double lip seals with grease;
-- insert the seal in its seat and press down using a flat punch; do not tap the seal with a hammer or mallet;
-- whilst inserting the seal, check that the it is perpendicular to the seat; once settled, make sure that it makes
contact with the thrust element, if required;
-- to prevent damaging the seal lip on the shaft, position a protective guard during installation operations.
“O--RING” SEALS
Lubricate the O--RING seals before inserting them in the seats, this will prevent them from overturning and twist-
ing, which would jeopardise sealing efficiency.
SEALING COMPOUNDS
Apply one of the following sealing compounds on the mating surfaces marked with an X: RTV SILMATE, RHO-
DORSIL CAF 1 or LOCTITE PLASTIC GASKET.
Before applying the sealing compound, prepare the surfaces as follows:
-- remove any incrustations using a wire brush;
-- thoroughly de--grease the surfaces using one of the following cleaning agents: trichlorethylene, petrol or a
water and soda solution.
BEARINGS
When installing bearings it is advised to:
-- heat the bearings to 176 to 194 °F (80 to 90 °C) before fitting on the shafts;
-- allow the bearings to cool before installing them from the outside.
14. 2 SECTION 00 -- GENERAL GUIDELINES -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
SPRING PINS
When fitting split socket elastic pins, ensure that the pin notch is positioned in the direction of the force required
to stress the pin.
Spiral spring pins do not require special positioning.
SPARE PARTS
Use genuine parts only.
Only genuine spare parts guarantee the same quality, duration and safety as they are the same parts that are
assembled during production.
Only genuine parts can offer this guarantee.
When ordering spare parts, always provide the following information:
-- tractor model (commercial name) and frame number;
-- engine type and number;
-- part number of the ordered part, which can be found in the “Microfiches” or the “Spare Parts Catalogue”, used
for order processing.
TOOLS
The tools that NEW HOLLAND propose and illustrate in this manual are:
-- specifically researched and designed for use with NEW HOLLAND vehicles;
-- essential for reliable repair operations;
-- accurately built and rigorously tested so as to offer efficient and long--lasting operation.
By using these tools, repair personnel will benefit from:
-- operating in optimal technical conditions;
-- obtaining the best results;
-- saving time and effort;
-- working in safe conditions.
IMPORTANT NOTES
Wear limit values indicated for certain parts are recommended, but not binding. The terms “front”, “rear”, “right--
hand” and “left--hand” (when referred to different parts) are intended as seen from the driving position with the
vehicle in the normal direction of movement.
MOVING THE TRACTOR WITH THE BATTERY REMOVED
External power supply cables should only be connected to the respective positive and negative cable terminals,
using efficient clamps that guarantee adequate and secure contact.
Disconnect all services (lights, windshield wipers, etc.) before starting the vehicle.
If the vehicle electrical system requires checking, carry out operations with the power supply connected; once
checking is completed, disconnect all services and switch off the power supply before disconnecting the cables.
15. SECTION 00 -- GENERAL GUIDELINES -- CHAPTER 1 3
603.54.451.00 -- 01 -- 2004
SAFETY REGULATIONS
PAY ATTENTION TO THIS SYMBOL
This warning symbol points out important messages
concerning your safety.
Carefully read the following safety regulations and
observe advised precautions in order to avoid poten-
tial hazards and safeguard your health and safety.
In this manual the symbol is accompanied by the fol-
lowing key--words:
CAUTION -- Warnings concerning unsuitable repair
operations that may jeopardise the safety of Service
personnel.
DANGER -- Specific warnings concerning potential
hazards for operator safety or for other persons di-
rectly or indirectly involved.
ACCIDENT PREVENTION
Most accidents or injuries that occur in workshops
are the result of non--observance of simple and fun-
damental safety regulations. For this reason, IN
MOST CASES THESE ACCIDENTS CAN BE
AVOIDED by foreseeing possible causes and conse-
quently acting with the necessary caution and care.
Accidents may occur with all types of vehicle, regard-
less of how well it was designed and built.
A careful and judicious service technician is the best
guarantee against accidents.
Precise observance of the most basic safety rule is
normally sufficient to avoid many serious accidents.
DANGER. Never carry out any cleaning, lubrication
or maintenance operations when the engine is run-
ning.
SAFETY REGULATIONS
GENERAL GUIDELINES
-- Carefully follow specified repair and mainten-
ance procedures.
-- Do not wear rings, wristwatches, jewellery, un-
buttoned or loose articles of clothing such as:
ties, torn clothing, scarves, open jackets or shirts
with open zips that may remain entangled in
moving parts. It is advised to wear approved
safety clothing, e.g.: non--slip footwear, gloves,
safety goggles, helmets, etc.
-- Do not carry out repair operations with someone
sitting in the driver’s seat, unless the person is a
trained technician who is assisting with the oper-
ation in question.
1
-- Do not operate the vehicle or use any of the im-
plements from different positions, other than the
driver’s seat.
-- Do not carry out operations on the vehicle with
the engine running, unless specifically indicated.
-- Stop the engine and check that the hydraulic cir-
cuits are pressure--free before removing caps,
covers, valves, etc.
-- All repair and maintenance operations must be
carried out using extreme care and attention.
-- Service steps and platforms used in a workshop
or in the field should be built in compliance with
the safety rules in force.
-- Disconnect the batteries and label all controls to
indicate that the vehicle is being serviced. Any
parts that are to be raised must be locked in posi-
tion.
-- Do not check or fill fuel tanks, accumulator bat-
teries, nor use starting liquid when smoking or
near naked flames, as these fluids are inflam-
mable.
-- Brakes are inoperative when manually released
for repair or maintenance purposes. Use blocks
or similar devices to control the machine in these
conditions.
-- The fuel nozzle should always be in contact with
the filling aperture. Maintain this position until fill-
ing operations are completed in order to avoid
possible sparks caused by the accumulation of
static electricity.
16. 4 SECTION 00 -- GENERAL GUIDELINES -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
-- Only use specified towing points for towing the
tractor. Connect parts carefully. Make sure that
all pins and/or locks are secured in position be-
fore applying traction. Never remain near the
towing bars, cables or chains that are operating
under load.
-- Transport vehicles that cannot be driven using a
trailer or a low--loading platform trolley, if avail-
able.
-- When loading or unloading the vehicle from the
trailer (or other means of transport), select a flat
area capable of sustaining the trailer or truck
wheels. Firmly secure the tractor to the truck or
trailer and lock the wheels in the position used by
the carrier.
-- Electric heaters, battery--chargers and similar
equipment must only be powered by auxiliary
power supplies with efficient ground insulation to
avoid electrical shock hazards.
-- Always use suitable hoisting or lifting devices
when raising or moving heavy parts.
-- Take extra care if bystanders are present.
-- Never pour petrol or diesel oil into open, wide or
low containers.
-- Never use petrol, diesel oil or other inflammable
liquids as cleaning agents. Use non--inflam-
mable, non toxic commercially available sol-
vents.
-- Wear safety goggles with side guards when
cleaning parts with compressed air.
-- Limit the air pressure to a maximum of 30.45 psi
(2.1 bar), according to local regulations.
-- Do not run the engine in confined spaces without
suitable ventilation.
-- Do not smoke, use naked flames, or cause
sparks in the area when fuel filling or handling
highly inflammable liquids.
-- Never use naked flames for lighting when work-
ing on the machine or checking for leaks.
-- All movements must be carried out carefully
when working under, on or near the vehicle.
Wear protective equipment: helmets, goggles
and special footwear.
-- When carrying out checks with the engine run-
ning, request the assistance of an operator in the
driver’s seat. The operator must maintain visual
contact with the service technician at all times.
-- If operating outside the workshop, position the
vehicle on a flat surface and lock in position. If
working on a slope, lock the vehicle in position.
Move to a flat area as soon as is safely possible.
-- Damaged or bent chains or cables are unreliable.
Do not use them for lifting or towing. Always use
suitable protective gloves when handling chains
or cables.
-- Chains should always be safely secured. Make
sure that the hitch--up point is capable of sustain-
ing the load in question. Keep the area near the
hitch--up point, chains or cables free of all by-
standers.
-- Maintenance and repair operations must be car-
ried out in a CLEAN and DRY area. Eliminate any
water or oil spillage immediately.
-- Do not create piles of oil or grease--soaked rags
as they represent a serious fire hazard. Always
place them into a metal container.
Before starting the tractor or its attachments,
check, adjust and block the operator’s seat. Also
check that there are no persons within the tractor
or implement range of action.
-- Do not keep into your pockets any object which
might fall unobserved into the tractor’s inner
compartments.
-- In the presence of protruding metal parts, use
protective goggles or goggles with side guards,
helmets, special footwear and gloves.
-- When welding, use protective safety devices:
tinted safety goggles, helmets, special overalls,
gloves and footwear. All persons present in the
area where welding is taking place must wear
tinted goggles. NEVER LOOK DIRECTLY AT
THE WELDING ARC WITHOUT SUITABLE EYE
PROTECTION.
-- Metal cables tend to fray with repeated use. Al-
ways use suitable protective devices (gloves,
goggles, etc.) when handling cables.
-- Handle all parts carefully. Do not put your hands
or fingers between moving parts. Always wear
suitable safety clothing -- safety goggles, gloves
and shoes.
22. SECTION 10 -- ENGINE -- CHAPTER 1 31
603.54.451.00 -- 01 -- 2004
Op. 10 001 10
ENGINE Removal--Installation
DANGER
Lift and handle all heavy parts using suitable lifting
equipment.
Make sure that assemblies or parts are supported by
means of suitable slings and hooks. Check that no
one is in the vicinity of the load to be lifted.
CAUTION
Always use appropriate tools to align fixing holes.
NEVER USE FINGERS OR HANDS.
1. Remove the cab following the instructions in
Section 90 Chapter 1.
2. Drain the oil from the rear transmission--gearbox
housing.
3. Unscrew the clamps and disconnect the fuel re-
turn hose (1) to the tank (2) and the fuel supply
pump inlet hose.
25659
1
2
7
4. Remove the retaining bolts and detach the rear
guard (1).
25643
1
8
5. Position bracket 380001613 (1) and secure it to
the engine and axle.
25544
1
9
23. 32 SECTION 10 -- ENGINE -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
6. Unscrew the two rear nuts (1) retaining the front
guard. 1
25644
10
7. Position a hydraulic jack under the front guard.
Unscrew the bolts (3) securing the brackets (1
and 2) and the screw retaining the bottom pivot
pin (4). Extract this pin and remove the above--
mentioned bracket (2).
25547
1
234
11
8. Extract the two rear screws and lower the hy-
draulic jack. Retrieve the guard (1) and bracket
(2).
1 2
25645
12
9. Remove the circlip (2) and move the rear sleeve
forwards (1). 1 2
25646
13
24. SECTION 10 -- ENGINE -- CHAPTER 1 33
603.54.451.00 -- 01 -- 2004
10. Remove the circlip (2) and move the front sleeve
forwards (1).
25647
1 2
14
11. Unscrew the bolts retaining the bearing support
(1) to the clutch housing and retrieve the drive
shaft together with the support.
25648
1
15
12. Disconnect the service control valve supply pipe
(1) and the front differential locking control pipe
(2).
25660
1
2
16
13. Disconnect the service brake control pipe (1) and
trailer brake valve control pipe (2). 1
2
25661
17
25. 34 SECTION 10 -- ENGINE -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
14. Remove the drain plug (1) and retrieve the diesel
in a suitable container.
25629
1
18
15. Disconnect the trailer brake control pipe (1) and
the pipe (2) connecting the auxiliary control
valves to the lift control valve.
16. Unscrew the clamp and disconnect the hydraulic
pump inlet pipe (1).
25662
1
2
3
19
17. Loosen the clamp and detach the sleeve (1) from
the relevant pipe, which you should then detach
from the front tank and remove.
25630
1
20
18. Unscrew the relevant clamps, detach the ther-
mostarter connections and remove the sleeve
(1) coupling the air filter to the intake manifold.
1
25663
21
26. SECTION 10 -- ENGINE -- CHAPTER 1 35
603.54.451.00 -- 01 -- 2004
19. Detach the sleeves (1 and 3) from the radiator
and unscrew the bracket (2) securing theradiator
to the engine.
20. Place a fixed stand under the engine, taking care
not to dent the oil sump plating.
25664
1
2
3
22
21. Connect a nylon rope (2) to the axle support and
to the hoist. Tension the rope and detach the
union (1) from the front hydraulic pump.
25665
1
2
23
22. Remove the retaining bolts (1) from both of them
and detach the axle support.
25666
1
24
23. Remove the bolts, retaining clamps and exhaust
silencer assembly (1). 1
25667
25
27. 36 SECTION 10 -- ENGINE -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
24. Loosen the clamp (3), unscrew the retaining
bolts (1) and remove the vapour recirculation de-
vice (2).
25668
1 2 3
26
25. Place a fixed stand under the clutch housing.
Connect a chain to the engine and hoist. Tension
the chain. Unscrew the bolts (1) securing the en-
gine to the clutch housing and remove the en-
gine.
26. Refit the engine taking the following into con-
sideration
CAUTION
Always use appropriate tools to align fixing holes.
NEVER USE FINGERS OR HANDS.
25669
1
27
-- Apply the torque settings listed on page 20.
-- Before refitting the engine to the clutch box care-
fully clean the mating surfaces and apply sealing
compound (0.0787 in. (2 mm) diameter), accord-
ing to the diagram shown Section 21, Chapter 1,
page 34.
-- Fit the engine on the clutch casing.
-- Fit the vapour recirculation device.
-- Fit the exhaust silencer assembly.
-- Refit the axle support to the engine and fit the
union on the front hydraulic pump.
-- Connect and secure the sleeves to the radiator.
Lock the bracket securing the radiator to the en-
gine.
-- Fit the sleeve connecting the air filterto theintake
manifold.
-- Fit the fuel tank connection piping.
-- Connect the hydraulic pump inlet piping and the
pipes governing the trailer brake and connecting
the auxiliary control valves to the lift.
-- Fit the fuel tank plug.
-- Connect the service brake and trailer brake valve
control pipes.
-- Connect the differential lock and service control
valve supply pipes.
-- Refit the drive shaft and relevant guards.
-- Remove bracket 380001613 securing the engine
and front axle.
-- Refit the fuel inlet and return pipes.
-- Screw the drain plugs onto the transmission
housing and onto the diesel tank and replenish
them (for the prescribed product and quantity,
see page 6 sect. 00).
-- Refit the cab following the instructions in Sec-
tion 90, Chapter 1.
28. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
29. SECTION 10 -- ENGINE -- CHAPTER 1 37
603.54.451.00 -- 01 -- 2004
Op. 10 001 54
ENGINE Disassembly -- Assembly
CAUTION
Handle all parts carefully.
Do not put your hands or fingers between parts.
Wear the prescribed safety clothing, including
goggles, gloves and safety footwear.
Proceed as follows.
1. Disconnect the pipe (1) from the seat of the ther-
mostatic valve, loosen the bolts securing the al-
ternator and remove the fan drive belt (2). 25670
1
2
28
2. Remove the retaining bolts and retrieve the fan
(1), spacer and driving pulley (2). Detach the re-
turn pipe (3) from the coolant pump.
25671
1 2
3
29
3. Take out the retaining bolts and remove the cool-
ant pump (1).
25672
1
30
4. Take out the retaining bolts and detach the cool-
ant pump support (1).
25673
1
31
30. 38 SECTION 10 -- ENGINE -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
5. Secure the bracket (1), series 380000313, to the
engine and lock this on the rotary stand
380000301.
25674
1
32
6. Disconnect the pipes (1 and 2) from the crank-
case and from the hydraulic pump governing the
services.
25675
1
2
33
7. Disconnect the thermostarter supply pipe (1) and
the return pipe (2) from the thermostarter and
from the injectors.
25676
1 2
34
8. Unscrew the unions (2 and 3) from the injection
pump and from the fuel pump. Take out the re-
taining bolts and remove the fuel filter (1) to-
gether with the support and pipes.
25677
1 2
3
35
31. SECTION 10 -- ENGINE -- CHAPTER 1 39
603.54.451.00 -- 01 -- 2004
9. Unscrew the retaining bolts and remove the ther-
mostatic valve assembly (1). 1
25678
36
10. Unscrew the retaining bolts and remove the al-
ternator (1) together with the support (2).
25679
1
2
37
11. Unscrew the retaining bolts and remove the ex-
haust manifold (1).
12. Unscrew the engine oil filter (2).
25680
1 2
38
13. Disconnect the pipes (2) from the injection pump
and from the injectors.
14. Unscrew the retaining bolts and remove the inlet
manifold (1).
25681
1
2
39
32. 40 SECTION 10 -- ENGINE -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
15. Unscrew the pump retaining bolts (1).
25682
1
40
16. Remove the cover (1) to access the injection
pump gear compartment.
25683
1
41
17. Unscrew the nut securing the injection pump to
the gear (1).
18. Extract the injection pump driving gear using the
tool 380000322 (2) and retrieve the injection
pump with the Woodruff key.
1 2
25684
42
19. Unscrew the retaining nuts (1) and retrieve the
fuel pump (2) together with the support.
25685
1 2
43
33. SECTION 10 -- ENGINE -- CHAPTER 1 41
603.54.451.00 -- 01 -- 2004
20. Disconnect the piping (1) from the filter, unscrew
the bolts securing the pressure relief valve as-
sembly (2) and remove it.
25686
1 2
44
21. Take out the retaining bolts and detach the hy-
draulic pump (1) along with the oil filter (2).
2
25687
1
45
22. Take out the retaining bolts and remove the lift
hydraulic pump (1).
25688
1
46
23. Take out the retaining bolts and remove the
starter motor (1).
25689
1
47
34. 42 SECTION 10 -- ENGINE -- CHAPTER 1
603.54.451.00 -- 01 -- 2004
24. Remove the injector mounting nuts, the under-
lying spherical washers, then the supports and
the injectors themselves.
25. Remove the retaining bolts (1), washers and
seal, then remove the rocker housing cover (2)
and seal.
25098
2
1
48
26. Remove the rocker shaft retaining bolts (2), then
remove the entire rocker shaft assembly (1).
25099
1 2
49
27. Remove the valve collets (1) and extract the pu-
shrods (2).
25100
21
50
28. Unscrew the cylinder head bolts (1) and remove
the head using a hoist and lifting hook
380000216.
29. Remove the cylinder head gasket.
25101 1
51