This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems. Safety warnings are provided, noting that maintenance and repair should only be performed by trained technicians using the proper tools and following the instructions carefully.
New holland td5030 tractor service repair manual instant downloadufdujjsjekkksem
This document is a service manual for New Holland TD series tractor models TD5010 through TD5050. It contains sections covering the general information, engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and cab. Each section includes specifications, troubleshooting information, removal and installation instructions, and overhaul procedures for the various systems on the tractors.
New holland td5050 tractor service repair manualuudjjjkskkmem
This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems.
New holland td5020 tractor service repair manual instant downloadufdujjsjekkksem
This document is a service manual for New Holland TD series tractor models TD5010 through TD5050. It contains sections covering the general information, engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and cab. Each section includes specifications, troubleshooting information, removal and installation instructions, and overhaul procedures for the various systems on the tractors.
New holland td5010 tractor service repair manual instant downloadufdujjsjekkksem
This document is a service manual for New Holland TD series tractor models TD5010 through TD5050. It contains sections covering the general information, engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and cab. Each section includes specifications, troubleshooting information, removal and installation instructions, and overhaul procedures for the various systems on the tractors.
New holland td60 d tractor service repair manualufusjejfjksekmm
This document is the service manual for TD60D-TD95D model tractors. It contains sections on general information, the engine, clutch, gearbox, transmission of motion, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, auxiliary equipment, electrical system, and cab. Each section provides specifications, removal and installation instructions, overhaul procedures, and troubleshooting information for the corresponding systems.
New holland w230 c wheel loader service repair manualfusjfjskekmsme
This document provides instructions for removing the engine from a wheel loader. It outlines 11 steps, which include draining fluids, disconnecting batteries and wiring harnesses, and using lifting straps to raise the hood. The goal is to safely remove the engine while properly marking and draining components to facilitate reinstallation. Key steps include draining the coolant and oil, disconnecting the batteries, and inserting a lifting bar through straps to raise the hood and access the engine.
New holland w110 d zbar tier4b wheel loader service repair manualfusjfjskekmsme
This service manual section provides instructions for removing the engine from a W110 D wheel loader. The key steps include draining fluids, disconnecting battery and wiring harnesses, and removing mounting hardware. Tags and labels are used to identify disconnected parts for reinstallation. Safety precautions are noted, such as using lifting straps when raising components.
New holland ts115 a tractor service repair manualfusjfjskekmsme
The document provides repair and service information for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A, T6010, T6020, T6030, T6050, and T6070. It contains sections on general safety, product identification, specifications, dimensions, and repair instructions for engine, transmission, brakes, hydraulics and other systems. Safety precautions are highlighted, including wearing proper protective equipment and following maintenance procedures only when the engine is off.
New holland td5030 tractor service repair manual instant downloadufdujjsjekkksem
This document is a service manual for New Holland TD series tractor models TD5010 through TD5050. It contains sections covering the general information, engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and cab. Each section includes specifications, troubleshooting information, removal and installation instructions, and overhaul procedures for the various systems on the tractors.
New holland td5050 tractor service repair manualuudjjjkskkmem
This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems.
New holland td5020 tractor service repair manual instant downloadufdujjsjekkksem
This document is a service manual for New Holland TD series tractor models TD5010 through TD5050. It contains sections covering the general information, engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and cab. Each section includes specifications, troubleshooting information, removal and installation instructions, and overhaul procedures for the various systems on the tractors.
New holland td5010 tractor service repair manual instant downloadufdujjsjekkksem
This document is a service manual for New Holland TD series tractor models TD5010 through TD5050. It contains sections covering the general information, engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and cab. Each section includes specifications, troubleshooting information, removal and installation instructions, and overhaul procedures for the various systems on the tractors.
New holland td60 d tractor service repair manualufusjejfjksekmm
This document is the service manual for TD60D-TD95D model tractors. It contains sections on general information, the engine, clutch, gearbox, transmission of motion, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, auxiliary equipment, electrical system, and cab. Each section provides specifications, removal and installation instructions, overhaul procedures, and troubleshooting information for the corresponding systems.
New holland w230 c wheel loader service repair manualfusjfjskekmsme
This document provides instructions for removing the engine from a wheel loader. It outlines 11 steps, which include draining fluids, disconnecting batteries and wiring harnesses, and using lifting straps to raise the hood. The goal is to safely remove the engine while properly marking and draining components to facilitate reinstallation. Key steps include draining the coolant and oil, disconnecting the batteries, and inserting a lifting bar through straps to raise the hood and access the engine.
New holland w110 d zbar tier4b wheel loader service repair manualfusjfjskekmsme
This service manual section provides instructions for removing the engine from a W110 D wheel loader. The key steps include draining fluids, disconnecting battery and wiring harnesses, and removing mounting hardware. Tags and labels are used to identify disconnected parts for reinstallation. Safety precautions are noted, such as using lifting straps when raising components.
New holland ts115 a tractor service repair manualfusjfjskekmsme
The document provides repair and service information for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A, T6010, T6020, T6030, T6050, and T6070. It contains sections on general safety, product identification, specifications, dimensions, and repair instructions for engine, transmission, brakes, hydraulics and other systems. Safety precautions are highlighted, including wearing proper protective equipment and following maintenance procedures only when the engine is off.
New holland tn85 fa tractor service repair manualfusjfjskekmsme
This document is a service manual for TN75FA-TN85FA-TN95FA tractors. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, diagrams, removal and installation instructions, and procedures for inspection and repair. The manual is intended exclusively for use by trained service technicians.
New holland tm190 tractor service repair manualfusjfjskekmsme
This document is a repair manual that provides instructions for servicing TM120, TM130, TM140, TM155, TM175, and TM190 tractors. It contains sections covering the general information, engine, clutch, transmission, drivelines, front and rear axles, brakes, hydraulics, steering, electrical systems, and cab. Safety precautions and maintenance instructions are provided throughout. The manual is intended solely for use by authorized service technicians according to the repair procedures specified.
New holland tk90 a tractor service repair manualfusjfjskekmsme
This document appears to be a repair manual for tractor models TK75VA, TK80A, TK80MA, TK90A, TK90MA, and TK100A. It contains sections on general instructions, safety procedures, the engine, clutch, transmissions, rear mechanical drive, braking system, hydraulics, steering, suspension, electrical systems, and emissions warranty information. The manual provides guidance on maintenance, repairs, proper installation of seals and bearings, and safety compliance.
New holland t6020 tractor service repair manualfusjfjskekmsme
The document is a service manual that covers hydraulic, pneumatic, electrical, and electronic systems for tractor models T6010 through T6070. It contains sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, brakes, frames, cabs, hitches, and more. Each section contains technical data, functional descriptions, diagnostics, and service procedures.
New holland t4040 supersteer tractor service repair manualfusjfjskekmsme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical system, platform/cab/bodywork, and technical support. Each section provides specifications, diagrams, removal and installation instructions, disassembly and assembly procedures, adjustments, and fault finding information for the various components.
New holland t9.565 tractor service repair manualfusjfjskekmsme
This service manual provides information for servicing the engines, fuel systems, air intake systems, cooling systems, exhaust systems, and other components of various tractor models. It includes specifications, maintenance procedures, and troubleshooting information to assist technicians in repairing components. The manual is intended to be used by qualified dealership personnel when performing maintenance and repairs.
New holland t9.530 tier 4 b (final) tractor service repair manualfusjfjskekmsme
This document contains safety guidelines for operating agricultural tractors and equipment. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Machine components should be inspected before operation and all guards kept in place. Proper shutdown and parking procedures help prevent injury or accidents.
New holland t9.505 [zcf200001 ] tractor service repair manualfusjfjskekmsme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components of the tractors.
New holland t9.450 [zdf200001 ] tractor service repair manualfusjfjskekmsme
This document is a service manual for Case IH T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 tractors. It provides instructions for removing and installing the engine and crankcase on the different tractor models, which include 9L tractors, 13L single turbo tractors, and 13L two stage turbocharger tractors. The manual also contains sections on other engine components like air cleaners, cooling systems, and exhaust systems.
New holland t8.350 powershift transmission (pst) tractor service repair manualfusjfjskekmsme
Plug or cap all ports and lines.
RAIL13TR04235AA 13
14. Remove the two bolts (1) securing the oil cooler
mounting bracket.
RAIL13TR04236AA 14
47794972 10/11/2014
10.1 [10.001] / 6
Engine - Engine and crankcase
15. Disconnect the harness connectors (1) for the fuel
pump and injectors.
RAIL13TR04238AA 15
16. Disconnect the fuel lines (1) from the fuel pump and
injectors. Plug or cap all lines.
RAIL13TR04239AA 16
17. Disconnect the harness connector (
New holland t8.320 tractor service repair manual (pin zfre03123 and above)fusjfjskekmsme
This document is a service manual for CNH Industrial T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM tractors with Powershift Transmissions (PST). The manual contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and drawbars, steering, wheels, tracks and track suspension, cab climate control, and electrical systems. Each section provides detailed information and specifications to service and repair the components.
New holland t4.85 tractor service repair manualfusjfjskekmsme
This document is a service manual for T4.85, T4.95, and T4.105 tractors. It contains over 200 sections covering all major systems of the tractors, including the engine, transmission, brakes, hydraulics, steering, electrical systems, and more. Each section provides information and instructions for servicing and repairing the various components. Safety guidelines are also provided at the beginning to help technicians perform repairs safely.
New holland t4.80 n tractor service repair manualfusjfjskekmsme
This document is a service manual that provides technical specifications and repair/maintenance instructions for various tractor models and components, including the engine, clutch, transmission, four-wheel drive system, front axle system, and other parts. It includes detailed sections on the engine and its systems, the clutch and transmission components, and the four-wheel drive and front axle assemblies. The manual also lists the engine used for each tractor model and market.
New holland ls160 skid steer loader service repair manual valid from serial n...fusjfjskekmsme
This document provides the table of contents for the repair manual for New Holland LS160 and LS170 skid steer loaders. It lists 10 sections that cover topics like the engine, transmission, brakes, hydraulics, frames, and electrical system. The summary also notes that the manual contains safety precautions and instructions for tasks like supporting the machine, operating the boom and cab, and craning the skid steer. Overall, the document outlines the organization and contents of the repair manual for servicing and maintaining the LS160 and LS170 skid steer loaders.
Hyster k005 (h5.00 xm europe) forklift service repair manualfusjfjskekmsme
This document provides repair instructions for various components of a forklift, including:
1. The counterweight can be removed using lifting eyebolts and a lifting device, taking precautions about stability and weight.
2. The hood can be removed by disconnecting gas cylinders and wiring, and must be properly adjusted upon installation for operator restraint.
3. The overhead guard is removed using lifting devices and fasteners, and its isolators should be inspected. LED backup lights are non-repairable units.
Hyster g004 (s120 fts) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for manual and electronic main control valves used in hydraulic lift trucks. It describes:
- There are two main control valve types - manual and electronic. Both are mounted to the cowl.
- The electronic main control valve incorporates an emergency lowering valve and is divided into steering control, lift/lower, tilt, auxiliary, and outlet sections.
- Removal procedures include disconnecting wiring harnesses and hydraulic hoses, removing the steering control unit, and removing O-rings from the main control valve.
Hyster f019 (h12.00 xm 12ec europe) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for a differential assembly. It describes removing the differential carrier from the axle housing and then disassembling the differential carrier. The main steps are:
1. Removing the differential carrier from the axle housing by draining oil, disconnecting drive shafts and brakes, and removing mounting bolts.
2. Removing the ring gear and main differential assembly from the carrier by taking off the bearing caps, adjusting rings, and thrust screw.
3. Removing the drive pinion and pinion carrier by securing the pinion with a bar, removing the mounting nuts and bolts, and lifting it out along with any shims.
The document provides detailed instructions for each
Hyster d138 (n50 fa) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for single and double reach carriages on lift trucks. It describes the components of the reach carriages including the inner and outer frames connected by scissor linkages. Procedures are provided for replacing components like forks, the load backrest extension, and removing and installing the side-shift frame. Detailed steps are outlined for tasks like disassembling and cleaning the side-shift frame components. Safety warnings and cautions are included throughout.
Hyster d024 (s135 ft) forklift service repair manualfusjfjskekmsme
This document provides instructions for repairing the hydraulic gear pump assembly for various lift truck models. It describes removing the pump from the transmission housing and draining hydraulic fluid from the tank. The pump is then disassembled by removing housings, seals, gears, and plates. Individual parts are cleaned, inspected for wear, and replaced as needed. Reassembly involves installing new seals and plates and reattaching the housings. Finally, the pump is reinstalled on the transmission housing with fittings attached to hydraulic lines.
Hyster c187 (s2.50 xl europe) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for alternators used in lift trucks. It describes two types of alternators - Type A and Type B. Type A alternators have a diode set and diode bridge, while Type B uses zener diodes in the diode bridge. The document includes cautions for repair, descriptions of alternator components and operation, and step-by-step instructions for removal, disassembly, cleaning, and reassembly of the alternators. Diagrams are provided showing views and components of the different alternator types.
New holland tn85 fa tractor service repair manualfusjfjskekmsme
This document is a service manual for TN75FA-TN85FA-TN95FA tractors. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, diagrams, removal and installation instructions, and procedures for inspection and repair. The manual is intended exclusively for use by trained service technicians.
New holland tm190 tractor service repair manualfusjfjskekmsme
This document is a repair manual that provides instructions for servicing TM120, TM130, TM140, TM155, TM175, and TM190 tractors. It contains sections covering the general information, engine, clutch, transmission, drivelines, front and rear axles, brakes, hydraulics, steering, electrical systems, and cab. Safety precautions and maintenance instructions are provided throughout. The manual is intended solely for use by authorized service technicians according to the repair procedures specified.
New holland tk90 a tractor service repair manualfusjfjskekmsme
This document appears to be a repair manual for tractor models TK75VA, TK80A, TK80MA, TK90A, TK90MA, and TK100A. It contains sections on general instructions, safety procedures, the engine, clutch, transmissions, rear mechanical drive, braking system, hydraulics, steering, suspension, electrical systems, and emissions warranty information. The manual provides guidance on maintenance, repairs, proper installation of seals and bearings, and safety compliance.
New holland t6020 tractor service repair manualfusjfjskekmsme
The document is a service manual that covers hydraulic, pneumatic, electrical, and electronic systems for tractor models T6010 through T6070. It contains sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, brakes, frames, cabs, hitches, and more. Each section contains technical data, functional descriptions, diagnostics, and service procedures.
New holland t4040 supersteer tractor service repair manualfusjfjskekmsme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections on general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical system, platform/cab/bodywork, and technical support. Each section provides specifications, diagrams, removal and installation instructions, disassembly and assembly procedures, adjustments, and fault finding information for the various components.
New holland t9.565 tractor service repair manualfusjfjskekmsme
This service manual provides information for servicing the engines, fuel systems, air intake systems, cooling systems, exhaust systems, and other components of various tractor models. It includes specifications, maintenance procedures, and troubleshooting information to assist technicians in repairing components. The manual is intended to be used by qualified dealership personnel when performing maintenance and repairs.
New holland t9.530 tier 4 b (final) tractor service repair manualfusjfjskekmsme
This document contains safety guidelines for operating agricultural tractors and equipment. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Machine components should be inspected before operation and all guards kept in place. Proper shutdown and parking procedures help prevent injury or accidents.
New holland t9.505 [zcf200001 ] tractor service repair manualfusjfjskekmsme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components of the tractors.
New holland t9.450 [zdf200001 ] tractor service repair manualfusjfjskekmsme
This document is a service manual for Case IH T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 tractors. It provides instructions for removing and installing the engine and crankcase on the different tractor models, which include 9L tractors, 13L single turbo tractors, and 13L two stage turbocharger tractors. The manual also contains sections on other engine components like air cleaners, cooling systems, and exhaust systems.
New holland t8.350 powershift transmission (pst) tractor service repair manualfusjfjskekmsme
Plug or cap all ports and lines.
RAIL13TR04235AA 13
14. Remove the two bolts (1) securing the oil cooler
mounting bracket.
RAIL13TR04236AA 14
47794972 10/11/2014
10.1 [10.001] / 6
Engine - Engine and crankcase
15. Disconnect the harness connectors (1) for the fuel
pump and injectors.
RAIL13TR04238AA 15
16. Disconnect the fuel lines (1) from the fuel pump and
injectors. Plug or cap all lines.
RAIL13TR04239AA 16
17. Disconnect the harness connector (
New holland t8.320 tractor service repair manual (pin zfre03123 and above)fusjfjskekmsme
This document is a service manual for CNH Industrial T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM tractors with Powershift Transmissions (PST). The manual contains sections covering the engine, power coupling, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and drawbars, steering, wheels, tracks and track suspension, cab climate control, and electrical systems. Each section provides detailed information and specifications to service and repair the components.
New holland t4.85 tractor service repair manualfusjfjskekmsme
This document is a service manual for T4.85, T4.95, and T4.105 tractors. It contains over 200 sections covering all major systems of the tractors, including the engine, transmission, brakes, hydraulics, steering, electrical systems, and more. Each section provides information and instructions for servicing and repairing the various components. Safety guidelines are also provided at the beginning to help technicians perform repairs safely.
New holland t4.80 n tractor service repair manualfusjfjskekmsme
This document is a service manual that provides technical specifications and repair/maintenance instructions for various tractor models and components, including the engine, clutch, transmission, four-wheel drive system, front axle system, and other parts. It includes detailed sections on the engine and its systems, the clutch and transmission components, and the four-wheel drive and front axle assemblies. The manual also lists the engine used for each tractor model and market.
New holland ls160 skid steer loader service repair manual valid from serial n...fusjfjskekmsme
This document provides the table of contents for the repair manual for New Holland LS160 and LS170 skid steer loaders. It lists 10 sections that cover topics like the engine, transmission, brakes, hydraulics, frames, and electrical system. The summary also notes that the manual contains safety precautions and instructions for tasks like supporting the machine, operating the boom and cab, and craning the skid steer. Overall, the document outlines the organization and contents of the repair manual for servicing and maintaining the LS160 and LS170 skid steer loaders.
Hyster k005 (h5.00 xm europe) forklift service repair manualfusjfjskekmsme
This document provides repair instructions for various components of a forklift, including:
1. The counterweight can be removed using lifting eyebolts and a lifting device, taking precautions about stability and weight.
2. The hood can be removed by disconnecting gas cylinders and wiring, and must be properly adjusted upon installation for operator restraint.
3. The overhead guard is removed using lifting devices and fasteners, and its isolators should be inspected. LED backup lights are non-repairable units.
Hyster g004 (s120 fts) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for manual and electronic main control valves used in hydraulic lift trucks. It describes:
- There are two main control valve types - manual and electronic. Both are mounted to the cowl.
- The electronic main control valve incorporates an emergency lowering valve and is divided into steering control, lift/lower, tilt, auxiliary, and outlet sections.
- Removal procedures include disconnecting wiring harnesses and hydraulic hoses, removing the steering control unit, and removing O-rings from the main control valve.
Hyster f019 (h12.00 xm 12ec europe) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for a differential assembly. It describes removing the differential carrier from the axle housing and then disassembling the differential carrier. The main steps are:
1. Removing the differential carrier from the axle housing by draining oil, disconnecting drive shafts and brakes, and removing mounting bolts.
2. Removing the ring gear and main differential assembly from the carrier by taking off the bearing caps, adjusting rings, and thrust screw.
3. Removing the drive pinion and pinion carrier by securing the pinion with a bar, removing the mounting nuts and bolts, and lifting it out along with any shims.
The document provides detailed instructions for each
Hyster d138 (n50 fa) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for single and double reach carriages on lift trucks. It describes the components of the reach carriages including the inner and outer frames connected by scissor linkages. Procedures are provided for replacing components like forks, the load backrest extension, and removing and installing the side-shift frame. Detailed steps are outlined for tasks like disassembling and cleaning the side-shift frame components. Safety warnings and cautions are included throughout.
Hyster d024 (s135 ft) forklift service repair manualfusjfjskekmsme
This document provides instructions for repairing the hydraulic gear pump assembly for various lift truck models. It describes removing the pump from the transmission housing and draining hydraulic fluid from the tank. The pump is then disassembled by removing housings, seals, gears, and plates. Individual parts are cleaned, inspected for wear, and replaced as needed. Reassembly involves installing new seals and plates and reattaching the housings. Finally, the pump is reinstalled on the transmission housing with fittings attached to hydraulic lines.
Hyster c187 (s2.50 xl europe) forklift service repair manualfusjfjskekmsme
This document provides repair procedures for alternators used in lift trucks. It describes two types of alternators - Type A and Type B. Type A alternators have a diode set and diode bridge, while Type B uses zener diodes in the diode bridge. The document includes cautions for repair, descriptions of alternator components and operation, and step-by-step instructions for removal, disassembly, cleaning, and reassembly of the alternators. Diagrams are provided showing views and components of the different alternator types.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
2. 84176561 - 03-2008
INTRODUCTION
- This manual is divided into sections identified by two-figure numbers and each section has independent
page numbering.
- The different sections can easily be found by consulting the table of contents on the following pages.
- The document number of the manual and the edition/update dates are given at the bottom of each page.
- Pages updated in the future will be identified by the same document number followed by an additional digit:
first standard manual edition 84176561A - 1st update 84176561A1 - 2nd update 84176561A2 - etc.
Updated pages can replace or supplement the pages of the standard manual; the necessary information for
the procedure by which to add or replace the pages is given on the frontispiece of the update.
An appropriately updated index will complete the publication.
If it is necessary to issue a new updated manual (2nd edition) this will have the document number 84176561B,
which indicates that the manual is composed of the standard version 87749051A complete with all the up‐
dates: 1st update 84176561A1 - 2nd update 84176561A2 - etc.
- The information contained in this manual was current on the date printed on each section. As
NEWăHOLLAND constantly improves its product range, some information may be out of date subsequent
to modifications implemented for technical or commercial reasons, or to meet legal requirements in different
countries.
In the event of conflicting information, consult the NEW HOLLAND Sales and Service Departments.
IMPORTANT WARNINGS
◊ All maintenance and repair work described in this manual must be performed exclusively by NEW HOLLAND
service technicians in strict accordance with the instructions given and using any specific tools necessary.
◊ Anyone who performs the operations described herein without strictly following the instructions is personally
responsible for resulting injury or damage to property.
◊ The Manufacturer and all organisations belonging to the Manufacturer's distribution network, including but
not restricted to national, regional or local distributors, will accept no responsibility for personal injury or dam‐
age to property caused by abnormal function of parts and/or components not approved by the Manufacturer,
including those used for maintenance and/or repair of the product manufactured or marketed by the Manufac‐
turer.
In any case, the product manufactured or marketed by the Manufacturer is covered by no guarantee of any
kind against personal injury or damage to property caused by abnormal function of parts and/or components
not approved by the Manufacturer.
TEXT AND ILLUSTRATIONS ARE THE PROPERTY
OF NEW HOLLAND
No part of the text or illustrations
may be reproduced
PRINTED IN TURKEY
NEW HOLLAND
SERVICE - Technical Publications & Special Tools
Part no. 84176561 - 03 - 2008
11. SECTION 00 - GENERAL - CHAPTER 1 1
84176561- 03 -2008
GENERAL INSTRUCTIONS
IMPORTANT NOTICE
All maintenance and repair operations described in this manual should be carried out exclusively by the NEW
HOLLAND authorised workshops. All instructions detailed should be carefully observed and special equipment
indicated should be used if necessary.
Everyone who carries out service operations described without carefully observing these prescriptions will be
directly responsible of deriving damages.
SHIMMING
At each adjustment, select adjusting shims, measure them individually using a micrometer and then sum up
recorded values. Do not rely on measuring the whole shimming set, which may be incorrect, or on rated value
indicated for each shim.
ROTATING SHAFT SEALS
To correctly install rotating shaft seals, observe the following instructions:
- Let the seal soak into the same oil as it will seal for at least half an hour before mounting;
- Thoroughly clean the shaft and ensure that the shaft working surface is not damaged;
- Place the sealing lip towards the fluid. In case of a hydrodynamic lip, consider the shaft rotation direction and
orient grooves in order that they deviate the fluid towards the inner side of the seal;
- Coat the sealing lip with a thin layer of lubricant (oil rather than grease) and fill with grease the gap between
the sealing lip and the dust lip of double lip seals;
- Insert the seal into its seat and press it down using a flat punch. Do no tap the seal with a hammer or a drift;
- Take care to insert the seal perpendicularly to its seat while you are pressing it. Once the seal is settled, ensure
that it contacts the thrust element if required.;
- To prevent damaging the sealing lip against the shaft, place a suitable protection during installation.
O RINGS
Lubricate the O rings before inserting them into their seats. This will prevent the O rings from rolling over and
twine during mounting which will jeopardise sealing.
SEALERS
Apply one of the following sealers: RTV SILMATE, RHODORSIL CAF 1, or LOCTITE PLASTIC GASKET over
the mating surfaces marked with an X.
Before applying the sealer, prepare the surface as follows:
- remove possible scales using a metal brush;
- thoroughly degrease the surfaces using one of the following cleaning agent: trichlorethylene, petrol or a water
and soda solution.
BEARINGS
It is advisable to heat the bearings to 80 to 90°C before mounting them on their shafts and cool them down before
inserting them into their seats with external tapping.
ROLL PINS
When fitting straight roll pins, ensure that the pin notch is oriented in the direction of the effort to stress the pin.
Coil roll pins can be installed in any position.
12. SECTION 00 - GENERAL - CHAPTER 1 3
84176561- 03 -2008
SAFETY RULES
PAY ATTENTION TO THIS SYMBOL
This warning symbol points out important messages involving personal safety.
Carefully read the safety rules contained herein and follow advised precautions to
avoid potential hazards and safeguard your safety and personal integrity.
In this manual you will find this symbol together with the following key-words:
WARNING - it gives warning about improper repair operations and deriving potential
consequences affecting the service technician's personal safety.
DANGER - it gives specific warning about potential dangers for personal safety of the
operator or other persons directly or indirectly involved.
TO PREVENT ACCIDENTS
Most accidents and personal injuries taking place in
workshops are due from non-observance of some
simple and essential prudential rule and safety pre‐
cautions. For this reason, IN MOST CASES THEY
CAN BE AVOIDED. It suffices to foresee possible
causes and act consequently with necessary caution
and care.
The possibility that an accident might occur with any
type of machines should not be disregarded, no mat‐
ter how well the machine in question was designed
and built.
A wise and careful service technician is the best pre‐
cautions against accidents.
Careful observance of this only basic precaution
would be enough to avoid many severe accidents.
DANGER: Never carry out any cleaning, lubrication
or maintenance operations when the engine is run‐
ning.
SAFETY RULES
GENERALITIES
◊ Carefully follow specified repair and mainte‐
nance procedures.
◊ Do not wear rings, wristwatches, jewels, unbut‐
toned or flapping clothing such as ties, torn
clothes, scarves, open jackets or shirts with open
zips which could get hold into moving parts. We
advise to use approved safety clothing such as
anti-slipping footwear, gloves, safety goggles,
helmets, etc.
◊ Never carry out any repair on the machine if
someone is sitting on the operator's seat, except
if they are certified operators to assist in the
operation to be carried out.
◊ Never operate the machine or use attachments
from a place other than sitting at the operator's
seat.
◊ Never carry out any operation on the machine
when the engine is running, except when specifi‐
cally indicated.
◊ Stop the engine and ensure that all pressure is
relieved from hydraulic circuits before removing
caps, covers, valves, etc.
◊ All repair and maintenance operations should be
carried out with the greatest care and attention.
◊ Service stairs and platforms used in a workshop
or in the field should be built in compliance with
the safety rules in force.
◊ Disconnect the batteries and label all controls to
warn that the tractor is being serviced. Block the
machine and all equipment which should be
raised.
◊ Never check or fill fuel tanks and accumulator
batteries, nor use starting liquid if you are smok‐
ing or near open flames as such fluids are flam‐
mable.
◊ Brakes are inoperative when they are manually
released for maintenance purposes. In such
cases, the machine should be kept constantly
under control using blocks or similar devices.
◊ The fuel filling gun should remain always in con‐
tact with the filler neck. Maintain this contact until
the fuel stops flowing into the tank to avoid pos‐
sible sparks due to static electricity buildup.
14. SECTION 10 - ENGINE - CHAPTER 1 3
84176561 - 03-2008
ENGINE TROUBLESHOOTING
Problems Possible Causes Solutions
Engine does not start. 1. Batteries partially discharged. Check and recharge batteries. Re‐
place if necessary.
2. Battery terminal connections cor‐
roded or loose.
Clean, inspect and tighten terminal
nuts. Replace terminals and nuts if
excessively corroded.
3. Injection pump timing incorrect. Adjust injection pump timing.
4. Impurities or water in fuel lines. Disconnect fuel lines from injection
pump and clean thoroughly. If
necessary clean and dry the fuel tank.
5. No fuel in tank. Fill tank.
6. Fuel supply pump malfunction. Check and replace pump if necess‐
ary.
7. Air in fuel system. Check fuel lines, unions, supply
pump, filters and injection pump for
air; then bleed the air from the circuit.
8. Starter motor faulty. Repair or replace starter motor.
9. Thermostarter faulty. Check and replace thermostarter if
necessary.
Engine stalls. 1. Idle speed too low. Adjust idle speed.
2. Injection pump delivery irregular. Check injection pump delivery on test
bench.
3. Impurities or water in fuel lines. Disconnect fuel lines from injection
pump and clean thoroughly. If
necessary clean and dry the fuel tank.
4. Fuel filters clogged. Replace the filter cartridges.
5. Incorrect valve - rocker arm
clearances.
Adjust the clearance between the
rocker arms and the valves.
6. Burnt or cracked valves. Replace the valves.
7. Air in fuel system. Check fuel lines, unions, supply
pump, filters and injection pump for
air; then bleed the air from the circuit.
8. Injection pump drive mechanism
damaged.
Replace damaged parts.
(continued)
15. 4 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
ENGINE TROUBLESHOOTING
(cont)
Problems Possible Causes Solutions
Engine overheating. 1. Coolant pump malfunction. Overhaul pump and replace if
necessary.
2. Thermostat faulty. Replace the thermostat.
3. Radiator inefficient. Remove internal deposits by flushing.
Check for leaks and repair.
4. Deposits in cylinder head and
crankcase coolant passages.
Flush out coolant system.
5. Coolant pump and fan drive belt
slack.
Check and adjust belt tension.
6. Coolant level low. Top up expansion tank with specified
coolant mixture.
7. Incorrect engine timing. Check and adjust engine timing.
8. Injection pump calibration incor‐
rect - delivering too much or too
little fuel.
Calibrate pump on test bench to va‐
lues specified in calibration tables.
9. Air filter clogged. Clean filter unit and replace filter el‐
ement if necessary.
Engine lacks power and
runs unevenly.
1. Injection pump timing incorrect. Adjust injection pump timing.
2. Auto advance regulator in injec‐
tion pump damaged.
Overhaul injection pump and adjust
on test bench to values specified in
calibration table.
3. Control valve journal worn. Overhaul injection pump and adjust
on test bench to values specified in
calibration table.
4. Injection pump delivery irregular. Overhaul injection pump and adjust
on test bench to values specified in
calibration table.
5. All-speed governor damaged. Overhaul injection pump and adjust
on test bench to values specified in
calibration table.
6. Injectors partially obstructed or
damaged.
Clean and overhaul injectors and ad‐
just pressure setting.
7. Impurities or water in fuel lines. Disconnect fuel lines from injection
pump and clean thoroughly. If
necessary clean and dry the fuel tank.
(continued)
16. SECTION 10 - ENGINE - CHAPTER 1 5
84176561 - 03-2008
ENGINE TROUBLESHOOTING
(cont)
Problems Possible Causes Solutions
8. Fuel supply pump damaged. Replace fuel supply pump.
9. Incorrect valve - rocker arm
clearances.
Adjust the clearance between the
rocker arms and the valves.
10. Cylinder compression low. Test compression and overhaul en‐
gine if necessary.
11. Air filter clogged. Clean filter unit and replace filter el‐
ement if necessary.
12. Tie-rod in linkage between accel‐
erator and injection pump incor‐
rectly adjusted.
Adjust to correct length.
13. Fast idling speed screw on injec‐
tion pump incorrectly adjusted.
Adjust fast idling speed screw.
Engine produces abnormal
knocking noises.
1. Injectors partially obstructed or
damaged.
Clean and overhaul injectors and ad‐
just pressure setting.
2. Impurities accumulating in fuel
lines.
Clean fuel lines and replace severely
dented pipes; clean injection pump if
necessary.
3. Injection pump timing incorrect. Adjust injection pump timing.
4. Crankshaft knocking due to ex‐
cessive play in one or more main
or big-end bearings or excessive
endfloat.
Re-grind crankshaft journals and
crankpins. Fit oversize shell bearings
and thrust washers.
5. Crankshaft out of balance. Check crankshaft alignment and bal‐
ance; replace if necessary.
6. Flywheel bolts loose. Replace any bolts that have worked
loose and tighten all bolts to the speci‐
fied preliminary and angular torque
values.
7. Connecting rod axes not parallel. Straighten connecting rods, check
axes parallelism; replace con rods if
necessary.
8. Pistons knock due to excessive
wear.
Rebore cylinder liners and fit oversize
pistons.
9. Noise caused by excessive play
of gudgeon pins in small-end and
piston bushings. Loose fit of
small-end bushing.
Fit oversize gudgeon pin, rebore pis‐
ton seats and small-end bushings.
Replace with new bushings.
10. Excessive tappet / valve noise. Check for broken springs or excess‐
ive play between valve stems and
guides, cam followers and bores; ad‐
just valve clearances.
(continued)
17. 6 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
ENGINE TROUBLESHOOTING
(cont)
Problems Possible Causes Solutions
Engine produces excessive
black or dark grey smoke.
1. Maximum delivery of injection
pump too high.
Calibrate pump on test bench to va‐
lues specified in calibration tables.
2. Injection pump delivery excess‐
ively retarded or automatic ad‐
vance regulator damaged.
Adjust injection pump timing or check
automatic advance regulator.
3. Injection pump delivery excess‐
ively advanced.
Adjust injection pump timing.
4. Injectors partially or totally ob‐
structed or incorrectly adjusted.
Clean and overhaul injectors and ad‐
just pressure setting; replace if
necessary.
5. Air filter clogged. Clean filter unit and replace filter el‐
ement if necessary.
6. Loss of engine compression due
to:
- piston rings sticking;
- cylinder liner wear;
- worn or incorrectly adjusted
valves.
Replace damaged parts or, if necess‐
ary, overhaul the engine.
7. High-pressure fuel lines dam‐
aged.
Inspect and replace if necessary.
Blue, grey-blue or grey-‐
white smoke.
1. Injection pump delivery excess‐
ively retarded or automatic ad‐
vance regulator damaged.
Adjust injection pump timing or check
automatic advance regulator.
2. Injectors obstructed or damaged. Clean, overhaul and calibrate injec‐
tors, replace if necessary.
3. Oil leaking past piston rings due
to sticking rings or cylinder liner
wear.
Replace damaged parts or, if necess‐
ary, overhaul the engine.
4. Oil leaking through the inlet valve
guides due to guide or valve stem
wear.
Overhaul cylinder head.
5. Engine does not reach correct
operating temperature (thermo‐
stat faulty).
Replace the thermostat.
Engine runs on after
switching off.
1. Engine stop electromagnet dam‐
aged.
Replace electromagnet.
2. All-speed governor damaged. Overhaul injection pump and adjust
on test bench to values specified in
calibration table.
18. SECTION 10 - ENGINE - CHAPTER 1 7
84176561 - 03-2008
Op. 10 001 10
ENGINE R.I.
DANGER
Lift and handle all heavy parts using suitable lifting
equipment.
Make sure that assemblies or parts are supported by
means of suitable slings and hooks. Check that no
one is in the vicinity of the load to be lifted.
CAUTION
Always use appropriate tools to align fixing holes.
NEVER USE FINGERS OR HANDS.
1. Disconnect the battery negative lead (1).
2. Drain the oil from the transmission-gearbox
housing.
3. Drain the cooling system.
1
4. Remove the exhaust pipe, attach lifting chains
(2) to the bonnet (1) and attach the chain to the
hoist.
2
2
5. Disconnect the electrical connection (1) of
bonnet.
3
19. 8 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
6. Detach the gas struts (1) from the bonnet.
4
7. Remove the four bonnet hinge bolts (1) and lift
the bonnet clear.
5
8. Remove the three retaining bolts (1) and the
guard (2) on the right-left hand side of the fan.
6
9. Unscrew the nut (1) from the weight retaining pin.
Remove the weights from the front support.
7
20. SECTION 10 - ENGINE - CHAPTER 1 9
84176561 - 03-2008
10. Unscrew the front central and rear retaining bolts
on the front axle shaft guard, then remove the
guard (1).
25038
1
8
11. Remove the circlip (2) and move the front sleeve
(1) in the direction indicated by the arrow until it
is released from the groove on the front axle.
1 2
25039
9
12. Remove the circlip (2) and move the rear sleeve
(1) in the direction indicated by the arrow until it
is released from the groove on the drive.
1
2
25040
10
13. Remove the propeller shaft central support (1)
retaining bolts and extract the shaft together with
the support.
1
25041
11
21. 10 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
14. Dicconnect the pressure pipe connection (1) of
the lift pump.
12
15. Disconnect the delivery lines of both hydraulic lift
pump (1) and hydrostatic steering pump (2).
13
16. Detach the cab heating pipes (1) and (2).
14
17. Detach the cab air-conditioning pipes (1) and
(2).
15
22. SECTION 10 - ENGINE - CHAPTER 1 11
84176561 - 03-2008
18. Extract the plastic fasteners (2) and detach the
diesel recovery pipe (3) and delivery pipe (4) to
the diesel pump (1). 3
4
16
19. Remove two metal clamps (1) and the rigid pipe
of drawing oil from the transmission housing via
lift pump.
17
20. Remove the electrical connection from the brake
fluid reservoir and take the brake fluid reservoir
(1) from the bracket.
18
21. Disconnect the steering oil delivery and return
hoses (1) and (2). Disconnect the steering
cylinder lines (3) and (4).
3
4
19
23. 12 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
22. Disconnect the delivery and return lines (1) to the
power steering cylinders.
20
23. Disconnect rear brakes oil distribution
connection pipes (1) and (2).
21
24. Disconnect brake distributor valve connections
(1) and (2).
3
22
25. Disconnect A/C compressor inlet (1) and outlet
(2) hoses.
23
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. SECTION 10 - ENGINE - CHAPTER 1 13
84176561 - 03-2008
26. Remove the fusebox (1) from the bonnet
support.
24
27. Remove the electrical oil pressure switch (1).
25
28. Remove the electrical connections of coolant
temperature sender (1).
26
29. Remove the electrical connection of pump
cut-out solenoid sender (1) and hydrostatic
steering pump oil pressure switch (2).
27
26. 14 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
30. Remove the retaining retaining clips (1) and
detach the flexible cables governing the hand
throttle and pedal throttle.
31. Remove the retaining clip (2) and detach the
throttle control tie-rod connected to the injection
pump.
28
32. Disconnect the electrical connection (1) between
the cab and the engine.
29
33. Disconnect the electrical connections from
starter motor (1).
30
34. Disconnect the electrical connections from
alternator (1).
31
27. SECTION 10 - ENGINE - CHAPTER 1 15
84176561 - 03-2008
35. Disconnect the electrical connection of water in
fuel sensor (1).
32
36. Disconnect the electrical connections of dryer
filter sensor (1).
33
37. Remove the electrical connection (1), air filter
clogging sensor (2) and AC compressor
electrical connection (3).
3
34
38. Remove the two retaining bolts and the support
together with relays protecting system (1).
35
28. 16 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
39. Remove the two connectors of the brake lights
switch (1).
36
40. Loosen the corresponding retaining clamps and
extract the pipes (1), (2), (3) and (4).
3
4
37
41. Loosen the corresponding retaining bolts and
remove the bracket (1).
38
42. Hitch the engine to the hoist with the chains
anchouring it to the attachments on the engine.
39
29. SECTION 10 - ENGINE - CHAPTER 1 17
84176561 - 03-2008
43. Position the movable tool for dismantling tractors
380000569 with the bracket 380000500 and
adapter plate 380000844 under the engine and
place a wooden block in between the points of
contact between the tool and tractor.
1
2
40
44. Extract the differential lock pedal retaining pin
from the drive shaft (1), remove the pedal and
footboard (2).
25043
1
2
41
45. Unscrew the nuts (1) and the bolts securing the
engine to the transmission. Access is through
the two slots in the cab floor.
1
42
46. Remove the remaining six retaining bolts at the
bottom and side.
43
30. 18 SECTION 10 - ENGINE - CHAPTER 1
84176561- 03-2008
47. Seperate the engine from the transmission with
the tool 380000569.
1 2
44
48. Remove the spacer located between the engine
and the transmission.
45
49. Insert the fixed under the balast support and
secure the front wheels with wooden blocks.
1 2
46
50. Loosen the corresponding retaining clamp (1)
and extract the pipes. And remove the bracket
(2).
47
31. SECTION 10 - ENGINE - CHAPTER 1 19
84176561 - 03-2008
51. Remove the bonnet support (1).
48
52. Loosen the retaining clamp and extract the pipe
(1) joining the coolant pump to the bottom of the
radiator.
49
53. Position a fixed stand (3) under the support of the
groove (1) of the front axle drive placing a
wooden plug (2) between the parts (3) and (1).
50
54. Remove the four bolts (2) fastening the front axle
support (1) to the engine (3).
51