This document is a service manual that contains contents, introduction, and safety rules sections. It provides information on various tractor systems including primary and secondary hydraulic power systems, pneumatic systems, electrical systems, engine systems, power train systems, travelling systems, and working arm systems. The introduction section emphasizes the importance of following safety procedures and instructions when performing maintenance or repairs. It outlines general safety rules regarding personal protective equipment, working on a running engine, lifting heavy components, and cleaning up spills.
Case ih puma 165 tractor service repair manualfkksejfjskemm
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
New holland td3.50 tractor service repair manualufusjejfjksekmm
This document provides a service manual for removing an engine from a tractor. It outlines 31 steps to disconnect all electrical connections, fluid lines, and mounting hardware. Safety warnings are provided to lift heavy components carefully, use tools to avoid pinching hazards, and to support the engine and transmission during removal. The process involves draining coolant, removing guards, disconnecting sensors, pumps, and the 4WD shaft before lowering the engine from the tractor using stands.
Case ih farmall 105 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
New holland t5030 tractor service repair manualfujdjffjkskemme
The document provides information on tractor engines, including general specifications, torque specifications, special tools, and an engine view diagram. It covers topics such as the engine model, cooling system, lubrication system, fuel system, intake and exhaust systems. Key components discussed include the cylinder block, cylinder head, pistons, crankshaft, camshaft, valves and valve train.
Case ih puma 195 tractor service repair manualdufjsfjkskekem
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on components, specifications, and repair procedures for the primary hydraulic power system, secondary hydraulic power system, hydraulic command system, pneumatic system, electrical power system, and electronic system. Special tools required for working on the hydraulic systems are also listed.
Case ih puma 180 tractor service repair manualdufjsfjkskekem
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on components, specifications, and repair procedures for the primary hydraulic power system, secondary hydraulic power system, hydraulic command system, pneumatic system, electrical power system, and electronic system. Special tools required for working on the hydraulic systems are also listed.
Case ih puma 210 tractor service repair manualufjsjekskem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
Case ih puma 210 tractor service repair manualdufjsfjkskekem
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel/injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body/structure (frame, user platform, environment control), and working arm systems (hitches). The introduction provides safety rules for working on the tractor.
Case ih puma 165 tractor service repair manualfkksejfjskemm
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
New holland td3.50 tractor service repair manualufusjejfjksekmm
This document provides a service manual for removing an engine from a tractor. It outlines 31 steps to disconnect all electrical connections, fluid lines, and mounting hardware. Safety warnings are provided to lift heavy components carefully, use tools to avoid pinching hazards, and to support the engine and transmission during removal. The process involves draining coolant, removing guards, disconnecting sensors, pumps, and the 4WD shaft before lowering the engine from the tractor using stands.
Case ih farmall 105 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
New holland t5030 tractor service repair manualfujdjffjkskemme
The document provides information on tractor engines, including general specifications, torque specifications, special tools, and an engine view diagram. It covers topics such as the engine model, cooling system, lubrication system, fuel system, intake and exhaust systems. Key components discussed include the cylinder block, cylinder head, pistons, crankshaft, camshaft, valves and valve train.
Case ih puma 195 tractor service repair manualdufjsfjkskekem
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on components, specifications, and repair procedures for the primary hydraulic power system, secondary hydraulic power system, hydraulic command system, pneumatic system, electrical power system, and electronic system. Special tools required for working on the hydraulic systems are also listed.
Case ih puma 180 tractor service repair manualdufjsfjkskekem
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on components, specifications, and repair procedures for the primary hydraulic power system, secondary hydraulic power system, hydraulic command system, pneumatic system, electrical power system, and electronic system. Special tools required for working on the hydraulic systems are also listed.
Case ih puma 210 tractor service repair manualufjsjekskem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
Case ih puma 210 tractor service repair manualdufjsfjkskekem
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel/injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body/structure (frame, user platform, environment control), and working arm systems (hitches). The introduction provides safety rules for working on the tractor.
Case ih puma 165 tractor service repair manualdufjsfjkskekem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
Case ih puma 180 tractor service repair manualfkksejfjskemm
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on components, specifications, and repair procedures for the primary hydraulic power system, secondary hydraulic power system, hydraulic command system, pneumatic system, electrical power system, and electronic system. Special tools required for working on the hydraulic systems are also listed.
Case ih puma 195 tractor service repair manualufjsjekskem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
CASE IH PUMA 180 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on primary and secondary hydraulic power systems, hydraulic and pneumatic components, electrical and electronic systems, engines, transmissions, axles, steering, brakes, suspensions, frames, operator platforms and hitches. The document also lists special tools needed for working on hydraulic system components.
CASE IH PUMA 165 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 210 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It covers components like the engine, fuel system, transmission, axles, steering, brakes, hitch and other systems. Special tools are also listed for working on hydraulic components and systems.
CASE IH PUMA 195 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
CASE IH PUMA 180 Tractor Service Repair Manual.pdff8usejkddmmd
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
CASE IH PUMA 210 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
CASE IH PUMA 195 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
CASE IH PUMA 165 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
CASE IH PUMA 210 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
CASE IH PUMA 195 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
CASE IH PUMA 180 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 165 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
CASE IH PUMA 195 Tractor Service Repair Manual Instant Download.pdfhuanbu41474704
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 195 Tractor Service Repair Manual Instant Download.pdfruan49549560
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 165 Tractor Service Repair Manual Instant Download.pdfhuanbu41474704
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on primary and secondary hydraulic power systems, hydraulic and pneumatic components, electrical and electronic systems, engines, transmissions, axles, steering, brakes, suspensions, frames, operator platforms and hitches. The document also lists special tools needed for working on hydraulic system components.
Mc cormick t series compact (2001 2009) - ct00 - t60f tractor service repair ...ifosodkmsme
This document contains parts lists and component information for repairing and replacing parts for tractor models. It includes lists of components, reference numbers, part numbers, descriptions and other technical specifications. Quantity requirements and application details are provided for components that may be needed for different tractor models or serial number ranges.
Mc cormick g max tier 3 new cab (2012- ) - rp75 - 125 tractor service repair ...ifosodkmsme
This document provides exploded diagrams and part lists for engine components of a McCormick G-MAX Tier 3 tractor, including the cylinder head, crankcase, pistons, connecting rods, camshaft, fuel pump, and other parts. Each component drawing includes reference numbers linked to replacement part numbers and quantities needed. The summary provides high-level information on the content and purpose of the document in 3 sentences or less.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 145 tractor service repair...ifosodkmsme
This document provides parts information for an Iveco G-MAX engine. It includes exploded diagrams of engine components and lists replacement parts with corresponding part numbers. The parts listed are for the engine block, cylinder head, valve train, fuel system, turbocharger, and other internal engine components. Specifications are provided for markets in North America and Europe.
Mc cormick g max (2008- ) - rp72 - 160 tractor service repair manualifosodkmsme
This document contains parts lists and technical specifications for components of an engine. It includes identification numbers, names and descriptions of parts like pistons, liners, gears, seals, valves and other engine components. Quantities, replacement codes and other technical details are provided for servicing and ordering the correct replacement parts.
More Related Content
Similar to New holland t7060 tractor service repair manual
Case ih puma 165 tractor service repair manualdufjsfjkskekem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
Case ih puma 180 tractor service repair manualfkksejfjskemm
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on components, specifications, and repair procedures for the primary hydraulic power system, secondary hydraulic power system, hydraulic command system, pneumatic system, electrical power system, and electronic system. Special tools required for working on the hydraulic systems are also listed.
Case ih puma 195 tractor service repair manualufjsjekskem
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
CASE IH PUMA 180 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on primary and secondary hydraulic power systems, hydraulic and pneumatic components, electrical and electronic systems, engines, transmissions, axles, steering, brakes, suspensions, frames, operator platforms and hitches. The document also lists special tools needed for working on hydraulic system components.
CASE IH PUMA 165 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 210 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It covers components like the engine, fuel system, transmission, axles, steering, brakes, hitch and other systems. Special tools are also listed for working on hydraulic components and systems.
CASE IH PUMA 195 Tractor Service Repair Manual.pdfufjiskemd8ud
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
CASE IH PUMA 180 Tractor Service Repair Manual.pdff8usejkddmmd
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
CASE IH PUMA 210 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
CASE IH PUMA 195 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
CASE IH PUMA 165 Tractor Service Repair Manual.pdff8usejkddmmd
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
CASE IH PUMA 210 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is a service manual for Case IH PUMA tractors that contains sections covering the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. The introduction provides safety rules for working on the tractor.
CASE IH PUMA 195 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is a service manual that contains information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It provides information on special tools needed for maintenance and repair of components within these various systems.
CASE IH PUMA 180 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 165 Tractor Service Repair Manual.pdffusekkdmdmd8i
This document is the service manual for Case IH PUMA tractors models 165, 180, 195, 210. It contains sections on the tractor's distribution systems, power systems (primary hydraulic, secondary hydraulic, pneumatic, electrical), electronic systems, power production systems (engine, fuel injection, air intake, exhaust, cooling, lubrication, starting), powertrain (transmission, reducers, PTOs), travelling systems (axles, steering, brakes, suspension, wheels), body and structure, user platform, environment control, and working arm/hitch. Safety rules are provided at the beginning regarding personal safety during maintenance and repair.
CASE IH PUMA 195 Tractor Service Repair Manual Instant Download.pdfhuanbu41474704
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 195 Tractor Service Repair Manual Instant Download.pdfruan49549560
This document is a service manual that provides information on the distribution systems for a tractor model. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, pneumatic system, electrical and electronic systems. It also covers the power production, power train, travelling, body and structure, and working arm systems of the tractor. Special tools are listed for working on the primary hydraulic power system.
CASE IH PUMA 165 Tractor Service Repair Manual Instant Download.pdfhuanbu41474704
This document is a service manual that contains sections covering the distribution systems, power production, power train, travelling, body and structure, and working arm systems of Case IH PUMA tractors. It provides information on primary and secondary hydraulic power systems, hydraulic and pneumatic components, electrical and electronic systems, engines, transmissions, axles, steering, brakes, suspensions, frames, operator platforms and hitches. The document also lists special tools needed for working on hydraulic system components.
Similar to New holland t7060 tractor service repair manual (18)
Mc cormick t series compact (2001 2009) - ct00 - t60f tractor service repair ...ifosodkmsme
This document contains parts lists and component information for repairing and replacing parts for tractor models. It includes lists of components, reference numbers, part numbers, descriptions and other technical specifications. Quantity requirements and application details are provided for components that may be needed for different tractor models or serial number ranges.
Mc cormick g max tier 3 new cab (2012- ) - rp75 - 125 tractor service repair ...ifosodkmsme
This document provides exploded diagrams and part lists for engine components of a McCormick G-MAX Tier 3 tractor, including the cylinder head, crankcase, pistons, connecting rods, camshaft, fuel pump, and other parts. Each component drawing includes reference numbers linked to replacement part numbers and quantities needed. The summary provides high-level information on the content and purpose of the document in 3 sentences or less.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 145 tractor service repair...ifosodkmsme
This document provides parts information for an Iveco G-MAX engine. It includes exploded diagrams of engine components and lists replacement parts with corresponding part numbers. The parts listed are for the engine block, cylinder head, valve train, fuel system, turbocharger, and other internal engine components. Specifications are provided for markets in North America and Europe.
Mc cormick g max (2008- ) - rp72 - 160 tractor service repair manualifosodkmsme
This document contains parts lists and technical specifications for components of an engine. It includes identification numbers, names and descriptions of parts like pistons, liners, gears, seals, valves and other engine components. Quantities, replacement codes and other technical details are provided for servicing and ordering the correct replacement parts.
Mc cormick gm tier 3 (2009 ) - rs12 - 55 tractor service repair manualifosodkmsme
This document contains parts lists and assembly instructions for engine components. It lists over 60 individual parts, including bolts, plugs, gaskets, pistons, rods, bearings, and other engine parts. For each part it specifies the part number, quantity needed, and tasks associated with the part like replacement or overhaul. It also includes assembly notes and specifies the tractor model and year the parts are associated with.
Mc cormick gm tier 3 (2009 ) - rs12 - 50 tractor service repair manualifosodkmsme
This document provides a list of components for repairing or replacing parts of a tractor transmission. It includes over 50 individual parts needed for the transmission assembly/overhaul, with details like part numbers, descriptions, quantities and replacement instructions. Each part is labeled as related to the transmission assembly ("T-A"). The list is accompanied by notes about component identification, quantity breakdowns for tractor models, and references to other pages or manuals.
Mc cormick gm tier 3 (2009 ) - rs12 - 45 tractor service repair manualifosodkmsme
This document provides a list of components for engine replacement or overhaul for a tractor model. It includes over 50 individual part items, each with details like part number, description, quantity needed and application (e.g. engine T-A). The parts are for systems like the cylinder head, pistons, flywheel, fuel pump and injection components. Precision replacement parts are also indicated for proper sizing (e.g. oversized or undersized variants). The document appears to be from a repair manual or parts catalog to facilitate maintenance and repairs for this tractor model.
Mc cormick gm tier 3 (2009 ) - rs12 - 40 tractor service repair manualifosodkmsme
This document contains parts lists and assembly diagrams for components of an agricultural tractor. It includes lists of replacement parts for engines, transmissions, hydraulics, and other systems. Each part is identified by number and name, and specifies whether it is for tractor model T-A or T-B. Quantity required and installation notes are also provided. The parts appear to be for a GM tier 3 tractor from 2009 or later.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm55 tractor service repair ...ifosodkmsme
This document contains parts listings and information for engine components. It includes listings of over 30 individual parts for an engine, with information on each part including part number, description, quantity, and whether it is for tractor models T-A or T-B. The document also provides identifying information at the top, including the tractor model series and manufacturer.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm50 tractor service repair ...ifosodkmsme
This document contains parts lists and assembly instructions for engine components of GM Series Tier 2 tractors from 2003-2008. It includes over 50 individual part numbers with descriptions of engine parts like pistons, rods, bearings, gaskets, plugs, bolts and other hardware. Quantity requirements and replacement part identifiers are provided. The parts are grouped according to their location in the engine and assembly sequence.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f105 gexl tractor service repair m...ifosodkmsme
This document contains a list of engine components with corresponding part numbers. It includes items like cylinder blocks, pistons, gears, pumps, nozzles and other engine parts. Quantities and references to other part numbers are provided. The document also notes that some items are replacements or not serviced and should be ordered. It relates to a Perkins engine that is part of a McCormick tractor.
Mc cormick fxl tier 3 (2008 2009) - rp53 - f100 gexl tractor service repair m...ifosodkmsme
This document contains a list of engine components with identification numbers, descriptions, and other technical specifications. It includes items like cylinder blocks, pistons, gears, shafts, gaskets, screws and other parts. Each item lists the reference number, quantity, identification code and other information. The document appears to be an inventory or parts listing for an engine, with details to help with ordering or identifying replacement components.
Massey ferguson mf8130 tractor parts catalogue manualifosodkmsme
This document provides exploded view diagrams and part lists for components of a Massey Ferguson 8130 tractor engine, including the cylinder block, crankshaft, cylinder head, rocker shaft, and turbocharger. It lists over 50 individual parts for each assembly, along with part numbers, quantities, descriptions, and notes. The diagrams show the assembly of components and their positions relative to each other.
Massey ferguson mf8120 tractor parts catalogue manualifosodkmsme
This document provides parts information for the cylinder head of a Massey Ferguson 8120 tractor. It contains 51 numbered items describing the individual parts that make up the cylinder head assembly, including the head, guides, plugs, seals, springs, caps, inserts, valves and screws. The document specifies the part numbers, quantities and any replacement comments for each part listed.
Massey ferguson mf7724 mf7724 s tractor (dyna vt) (f092038 9999999) or (m77...ifosodkmsme
This document contains parts listings and diagrams for a Massey Ferguson 7724/7724S tractor engine. It includes over 20 pages detailing over 150 individual engine parts, grouped by location in the engine (cylinder block, timing gears, flywheel, crankshaft, etc.). Each part is listed by number, name, quantity used, and other identifying information. Diagrams are provided to illustrate where each part is located in the engine.
Kubota b2410 hsdb tractor parts catalogue manualifosodkmsme
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability codes. It also provides notes about country codes that may be included.
Kubota b2410 hsd tractor parts catalogue manualifosodkmsme
This parts book page provides information on crankcase parts for a tractor model. It lists 20 individual parts that make up the crankcase assembly, including the composite crankcase, caps, plugs, pins, bushes and bolts. Specifications are provided such as part number, description, quantity used, serial number applicability, interchangeability, remarks and weight.
Kubota b2400 hse tractor parts catalogue manualifosodkmsme
The document provides instructions and definitions for parts books. It lists the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and explains what parts are different in other countries. The bottom section is an index of parts for a B2400HSE tractor model organized by system and subsystems.
Komatsu wa200 pz 6 wheel loader service repair manual sn70136 and upifosodkmsme
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA200-6 and WA200PZ-6.
- Sections include specifications, maintenance procedures, testing and adjustments, troubleshooting, and electrical systems.
- The manual contains diagrams of systems like the engine, power train, steering, brakes, hydraulics, and electrical wiring.
- Troubleshooting sections provide failure codes, testing procedures, and potential causes of issues.
Komatsu wa200 pz 6 wheel loader service repair manual (sn 70001 and up)ifosodkmsme
This document provides a shop manual for wheel loaders models WA200 and WA200PZ-6. It contains sections on specifications, maintenance standards, testing and adjusting procedures, and troubleshooting. The manual covers the engine and cooling system, power train, steering, brakes, undercarriage, hydraulics, work equipment, cab, electrical systems, standard values, and more. Troubleshooting sections include failure code tables, general troubleshooting information, and procedures for addressing individual failure codes displayed on the machine monitor.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
6. INTRODUCTION
Safety rules
IMPORTANT NOTICE
All maintenance and repair operations described in this manual should be carried out exclusively by authorised work-
shops. All instructions should be carefully observed and special equipment where indicated should be used.
Anyone who carries out service operations described without carefully observing these instructions will be directly
responsible for any damage caused.
NOTES FOR EQUIPMENT
Equipment shown in this manual is:
• designed expressly for use on these tractors;
• necessary to make a reliable repair;
• accurately built and strictly tested to offer efficient and long-lasting working life.
NOTICES
The words “front”, “rear”, “right hand”, and “left hand” refer to the different parts as seen from the operator’s seat
oriented to the normal direction of movement of the tractor.
SAFETY RULES
PAY ATTENTION TO THIS SYMBOL
This warning symbol points out important messages involving personal
safety. Carefully read the safety rules contained herein and follow advised
precautions to avoid potential hazards and safeguard your safety.
In this manual you will find this symbol together with the following
key-words:
WARNING -it gives warning about improper repair operations and potential
consequences affecting the service technician’s personal safety.
DANGER - it gives specific warning about potential dangers for personal
safety of the operator or other persons directly or indirectly involved in
the operation.
TO PREVENT ACCIDENTS
Most accidents and personal injuries taking place in workshops are due from non-observance of some essential rules
and safety precautions.
The possibility that an accident might occur with any type of machines should not be disregarded, no matter how well
the machine in question was designed and built.
A wise and careful service technician is the best precautions against accidents.
Careful observance of this basic precaution would be enough to avoid many severe accidents.
DANGER
Never carry out any cleaning, lubrication or maintenance operations when the engine is running.
B013
SAFETY RULES
Generalities
• Carefully follow specified repair and maintenance procedures.
87628084_B 28/07/2009
3
7. INTRODUCTION
• Do not wear rings, wristwatches, jewels, unbuttoned or flapping clothing such as ties, torn clothes, scarves, open
jackets or shirts with open zips which could get caught on moving parts. Use approved safety clothing such as
anti-slipping footwear, gloves, safety goggles, helmets, etc.
• Wear safety glasses with side guards when cleaning parts using compressed air.
• Damaged or frayed wires and chains are unreliable. Do not use them for lifting or towing.
• Wear suitable protection such as approved eye protection, helmets, special clothing, gloves and footwear when-
ever welding. All persons standing in the vicinity of the welding process should wear approved eye protection.
NEVER LOOK AT THE WELDING ARC IF YOUR EYES ARE NOT SUITABLY PROTECTED.
• Never carry out any repair on the machine if someone is sitting on the operator’s seat, except if they are qualified
operators assisting in the operation to be carried out.
• Never operate the machine or use attachments from a place other than sitting at the operator’s seat or at the side
of the machine when operating the fender switches.
• Never carry out any operation on the machine when the engine is running, except when specifically indicated. Stop
the engine and ensure that all pressure is relieved from hydraulic circuits before removing caps, covers, valves,
etc.
• All repair and maintenance operations should be carried out with the greatest care and attention.
• Disconnect the batteries and label all controls to warn that the tractor is being serviced. Block the machine and all
equipment which should be raised.
• Never check or fill fuel tanks or batteries, nor use starting liquid if you are smoking or near open flames as such
fluids are flammable.
• The fuel filling gun should always remain in contact with the filler neck. Maintain this contact until the fuel stops
flowing into the tank to avoid possible sparks due to static electricity build-up.
• To transfer a failed tractor, use a trailer or a low loading platform trolley if available.
• To load and unload the machine from the transportation means, select a flat area providing a firm support to the
trailer or truck wheels. Firmly tie the machine to the truck or trailer platform and block wheels as required by the
transporter.
• Always use lifting equipment of appropriate capacity to lift or move heavy components.
• Chains should always be safely fastened. Ensure that fastening device is strong enough to hold the load foreseen.
No persons should stand near the fastening point.
• The working area should be always kept CLEAN and DRY. Immediately clean any spillage of water or oil.
• Never use gasoline, diesel oil or other flammable liquids as cleaning agents. Use non-flammable non-toxic pro-
prietary solvents.
• Do not pile up grease or oil soaked rags, as they constitute a great fire hazard. Always place them into a metal
container.
START UP
• Never run the engine in confined spaces which are not equipped with adequate ventilation for exhaust gas extrac-
tion.
• Never bring your head, body, arms, legs, feet, hands, fingers near fans or rotating belts.
ENGINE
• Always loosen the radiator cap very slowly before removing it to allow pressure in the system to dissipate. Coolant
should be topped up only when the engine is stopped.
• Do not fill up fuel tank when the engine is running.
• Never adjust the fuel injection pump when the tractor is moving.
• Never lubricate the tractor when the engine is running.
ELECTRICAL SYSTEMS
• If it is necessary to use auxiliary batteries, cables must be connected at both sides as follows: (+) to (+) and (-) to
(-). Avoid short-circuiting the terminals. GAS RELEASED FROM BATTERIES IS HIGHLY FLAMMABLE. During
87628084_B 28/07/2009
4
9. Contents
DISTRIBUTION SYSTEMS - A
PRIMARY HYDRAULIC POWER SYSTEM................................................. A.10.A
T7030 , T7040 , T7050 , T7060
PRIMARY HYDRAULIC POWER SYSTEM Closed center mechanical remote valve ...... A.10.B
T7030 with Sidewinder Z9BG40001-, T7030 without Sidewinder, T7040 with Sidewinder Z9BG40001-, T7040 without Sidewinder, T7050
with Sidewinder Z9BG40001-, T7050 without Sidewinder, T7060 with Sidewinder Z9BG40001-, T7060 without Sidewinder
PRIMARY HYDRAULIC POWER SYSTEM Electro-hydraulic remote valve................ A.10.C
T7030 without Sidewinder, T7040 without Sidewinder, T7050 without Sidewinder, T7060 without Sidewinder
PRIMARY HYDRAULIC POWER SYSTEM Electro-hydraulic remote valve................ A.10.C
T7030 with Sidewinder Z9BG40001-, T7040 with Sidewinder Z9BG40001-, T7050 with Sidewinder Z9BG40001-, T7060 with Sidewinder
Z9BG40001-
SECONDARY HYDRAULIC POWER SYSTEM............................................. A.12.A
T7030 , T7040 , T7050 , T7060
HYDRAULIC COMMAND SYSTEM......................................................... A.14.A
T7030 , T7040 , T7050 , T7060
PNEUMATIC SYSTEM ...................................................................... A.20.A
T7030 , T7040 , T7050 , T7060
ELECTRICAL POWER SYSTEM ........................................................... A.30.A
T7030 without Sidewinder, T7040 without Sidewinder, T7050 without Sidewinder, T7060 without Sidewinder
ELECTRICAL POWER SYSTEM ........................................................... A.30.A
T7030 with Sidewinder Z9BG40001-, T7040 with Sidewinder Z9BG40001-, T7050 with Sidewinder Z9BG40001-, T7060 with Sidewinder
Z9BG40001-
ELECTRONIC SYSTEM .................................................................... A.50.A
T7030 , T7040 , T7050 , T7060
FAULT CODES .............................................................................. A.50.A
T7030 , T7040 , T7050 , T7060
87628084_B 28/07/2009
A
10. DISTRIBUTION SYSTEMS - A
PRIMARY HYDRAULIC POWER SYSTEM - 10.A
T7030
T7040
T7050
T7060
87628084_B 28/07/2009
A.10.A / 1
13. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Special tools
DESCRIPTION PART NUMBER
Tee adaptor 11/16 ORFS female x 11/16 ORFS male x
7/16 UNF female
297600*
Tee adaptor 7/16 JIC female x 7/16 JIC male x 7/16 UNF
female
297601*
Adaptor M10 banjo x 7/16 UNF female 297602*
Tee adaptor 9/16 ORFS female x 9/16 ORFS male x
7/16 UNF female
297603*
Blanking Cap 9/16 ORFS 297604*
Blanking Cap 7/16 ORFS 297605*
Adaptor 7/16 UNF female x 1/2 BSP male 297606*
Adaptor 7/16 UNF female x M12 x 1.5p male 297607*
Adaptor 7/16 UNF female x M14 x 1.5p male 297608*
Adaptor M14 banjo x M14 x 1.5p female 297609*
Tee adaptor 7/16 UNF female x 1/4 BSP hose tail x 1/2
hose
297610*
7/16 UNF male Quick release adaptor 297240*
Adaptor M10 x 1.0p x 7/16 UNF female 297404*
Tee adaptor 1” ORFS female x 1” ORFS male x 7/16
UNF female
380000517
Blanking Cap 11/16 ORFS 297671*
Pressure Gauge 0–10 bar 293241#
Pressure Gauge 0–40 bar (5 off) 293242#
Pressure Gauge 0–250 bar 293244#
Remote valve coupling 5101741
or 293449#
Quick release adaptor 291924
Pressure gauge hose 292246#
1/8 NPT fitting to attach hose 292246 to gauge 291927#
Adaptor M10 x 1.0p x 7/16 JIC male (enables use of
gauges with 7/16 JIC hoses if used)
297417
diagnostic switch 295041
Bypass connector 295044
Trailer brake fitting 293190#
Flow Meter 120 ltr/min minimum (procure locally)
* Part of hydraulic adaptor kit 297611
# Part of hydraulic pressure test kit 292870
Remote Valve check valve removal tool 380002720
87628084_B 28/07/2009
A.10.A / 4
14. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Power beyond - Torque
BAIL06CCM056ASA 1
Power Beyond Torque Sequence
BAIL06CCM180ASA 2
Power Beyond Coupler Torques
Refer to : Power beyond - Install (A.10.A)
87628084_B 28/07/2009
A.10.A / 5
15. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump Variable displacement pump - General specification
Load Sensed Variable Displacement Piston Pump ( 120/150 Ltr/Min)
Type Variable Flow Piston Pump
(Swash Plate Controlled)
Rotation Clockwise
Pump Speed@ 2200 erpm 2662 rpm
Output @ 2200 erpm Standard Flow 120 Ltr/min
26.4 Imp Galls/min
31.7 US Galls/min
Output @ 2200 erpm Hi- Flow 150 Ltr/min
32.9 Imp Galls/min
39.6 US Galls/min
Standby Pressure (Low Pressure
Standby)
26±1 bar ( 377±15 lbf.in2)
Maximum System Pressure (High
Pressure Standby)
210±5 bar ( 3046±73 lbf/in2)
Charge Pressure Filter Relief Valve 6 bar
Charge System Pressure 3 bar
87628084_B 28/07/2009
A.10.A / 6
16. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump Variable displacement pump - Torque
BAIL06CCM041GSA 1
87628084_B 28/07/2009
A.10.A / 7
17. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Charge pump - General specification
Charge Pump ( 106 Ltr/Min )
Type Gear Type Pump
Charge Pressure Filter Dump Valve Crack open @ 6.9 bar ( 100 lbf/in2)
Fully Open @ 12.4 bar ( 180 lbf/in2)
Charge Pressure Minimum 1.6 - 3.4 bar ( 23 - 50
lbf/in2)
@ 2100 rev/min and variable flow
piston pump ‘On Load’
Charge Pressure Switch Close @ 0.55 - 0.82 bar ( 8 - 12
lbf/in2)
Making charge pressure warning light
flash
87628084_B 28/07/2009
A.10.A / 8
18. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Static description
The hydraulic system comprises the following oil circuits:-
High pressure circuit
Hydraulic rear powerlift
Remote valves
Trailer brake system (where fitted)
Front axle suspension (where fitted)
Oil circuit of the steering hydraulics
Steering pump and steering cylinder
Control valve of the Fast Steer (where fitted)
Low pressure circuit
Engine PTO
Differential lock
All wheel drive
Actuation of transmission couplings and synchroniser units
Front axle servobrake
Engagement of the crawler gear
Servo-actuated main brake cylinder
Front PTO (where fitted)
Layout of the lubrication system
PTO coupling
Transmission coupling
Transmission shaft pressure lubrication
Bearing of the pump drive pinion
Lifting shaft of the hydraulic powerlift
The high pressure circuit is a closed Load Sensing system and is configured differently according to the variants in
equipment for each tractor model.
Steering circuit, low pressure and lubrication circuits are an open system, in models with SuperSteer front axle the
steering circuit is however configured as dynamic Load Sensing hydraulics.
VARIATIONS IN EQUIPMENT IN THE TRACTOR HYDRAULICS
Transmission High pressure
hydraulic system
Hydraulic pump Hydraulic powerlift Remote valves
Power Command
transmission
Closed system 120 L/min CCLS
variable displacement
pump
150 L/min "Hi Flow"
axial piston variable
displacement pump
Electronic powerlift
control
Closed system
87628084_B 28/07/2009
A.10.A / 9
19. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
CCLS axial piston variable displacement pump (1).
Figure 1 2
BAIL06CCM104ASA 1
BAIL08CVT085ASA 2
The high-pressure hydraulic pumps in the Load Sensing version with closed circuit can be differentiated by the serial
numbers on the plate above the pump:-
Figure 3 shows the rating plate of the 150 l/min (39.6 US gpm) pump.
BAIL06CCM082ASA 3
Figure 4 shows the rating plate of the 120 l/min (31.7 US gpm) pump.
87628084_B 28/07/2009
A.10.A / 10
20. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BAIL06CCM083ASA 4
87628084_B 28/07/2009
A.10.A / 11
21. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Closed Centre remote valves and electronic powerlift control (1).
BAIL06CCM057ASA 5
Operating the electronic powerlift control
In tractors that are equipped with an electronic hydraulic powerlift control, all controls for the hydraulics are gathered
together on one operating panel.
(1). Rotary control for draft control response sensitivity
(2). Lowering speed rotary control
(3). Rotary control for height limit control
(4). Rotary control for wheel slip control
BAIL09CCM089AVA 7
The control for the powerlift position control, the rapid control switch in the cab, and the controls for traction control
make operation of the EPC simple.
BAIL06CCM152ASA 8
87628084_B 28/07/2009
A.10.A / 12
22. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BRL6333B 9
87628084_B 28/07/2009
A.10.A / 13
23. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
The Raise and Lower functions of the powerlift with EPC can be actuated via the transmission lever..
BAIL06CCM154ASA 10
BAIL09CCM066AVA 11
The tractors can also be fitted with electrohydraulic remote valves (1).
BAIL06CCM085ASA 12
87628084_B 28/07/2009
A.10.A / 14
24. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Another optional version is mechanically-operated remote valves with adjustable locking (2) and flow rate regulators
(1).
BAIL06CCM086ASA 14
For implements that require a continual oil flow from the tractor's hydraulic system, the connection of a Power-beyond
valve segment on the control unit block is provided with oil couplings (1), (2) and (3).
BAIL06CCM054ASA 15
87628084_B 28/07/2009
A.10.A / 15
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
HIGH PRESSURE HYDRAULIC SYSTEM IN LOAD SENSING VERSION WITH CLOSED CIR-
CUIT
BAIL06CCM010GSA 16
1 Electrohydraulic remote valves 2 EPC control valve
3 Return pipe to the oil reservoir 4 Low pressure oil supply
5 To the lifting cylinders 6 Pump flow to electrohydr. remote valve and EPC
7 Flow control valve 8 Variable displacement pump
9 Trailer brake valve 10 Pressure-reducer priority valve
11 To the lifting cylinders 12 Load Sensing line from EPC control valve and
electrohydr. remote valves
The basic principle of the Closed Centre high-pressure hydraulic system in the Load Sensing version with variable
displacement pump is the availability of a needs-based oil flow. This makes possible simultaneous actuation of trailer
brake system, hydraulic powerlift, remote valves and - where fitted - the front axle suspension. The Load Sensing
variable displacement pump offers important advantages with regard to the reduction of engine power loss compared
87628084_B 28/07/2009
A.10.A / 16
27. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
to open-circuit systems, in which a higher oil volume flow, which is often clearly above the required amount, is contin-
ually pumped around the hydraulic system.
BAIL06CCM011GSA 17
1 EPC control valve 2 Low pressure oil supply
3 Return pipe to the oil reservoir 4 Flow control valve
5 Oil pressure of the steering hydraulics oil pump 6 Variable displacement pump
7 Load Sensing line to the pressure reducer priority valve 8 Pressure-reducer priority valve
9 Trailer brake valve 10 Pump flow to electrohydr. remote valve and EPC
11 To the oil coupling of the trailer brake 12 Oil pressure to the lifting cylinders
13Load Sensing line from EPC control valve and
electrohydr. remote valves
87628084_B 28/07/2009
A.10.A / 17
28. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
The high-pressure circuit illustrated in PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic schema (A.10.A) com-
prises the following components:
Hydraulic pump unit
The Load Sensing valve with pressure and oil flow control valves, oil pump and priority valve for the steering hydraulics,
intake filter and main oil filter as well as various electrical switches are integrated in the high-pressure variable dis-
placement pump.
Figure 18 shows the main pump unit.
NOTE: The oil pump for the steering hydraulics is shown separately to the main pump unit.
BSD2182A_559 18
The Load Sensing valve block consists of a high-pressure control valve (1) and an oil flow control valve. The Load Sensing
valve receives hydraulic control signals from the driven components and transmits these to the oil pump, which then matches
the supply volume to the system's requirement for oil.
The Load Sensing valve block is illustrated in Figure 19.
BSD2167A_561 19
87628084_B 28/07/2009
A.10.A / 18
29. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Priority valve
The priority valve (1) on the top of the main oil pump channels high-pressure oil to the control block and to the trailer
brake valve (where fitted). It also supplies the low-pressure control valve with low-pressure oil. If a front axle suspen-
sion is installed, a levelling valve (2) is mounted on the priority valve, which delivers an oil flow to the control valve for
the suspension (Figure 28) and to the cylinder.
BAIL06CCM091ASA 20
Steering hydraulics oil pump
Figure 21 shows the oil pump for the steering hydraulics.
The oil pump for the steering hydraulics is configured as a separate unit, but it is also driven by the same geared
wheel as the main oil pump.
1. Oil pump for the steering hydraulics
2. Connection to the control pump
3. Line to the oil cooler
BAIL06CCM084ASA 21
87628084_B 28/07/2009
A.10.A / 19
30. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Control valve of the Fast Steer (where fitted)
The Fast Steer , which is available as an optional extra, supplies increased responsiveness from the steering, when
needed, e. g. during front loader operations.
From the straight ahead position, Fast Steer, will provide full right or left-hand steering lock with a 8 ° movement of
the steering wheel.
BAIL06CCM076ASA 22
Trailer brake valve
The trailer brake valve is under the cab and is mounted on the priority valve at the top of the main pump unit. The
trailer brake valve allows pressure oil to flow to the trailer brake system, when both of the tractor's brake pedals are
depressed.
Figure 23 shows the trailer brake valve.
BAIL06CCM087ASA 23
87628084_B 28/07/2009
A.10.A / 20