This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland T6.180 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland T6.165 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland T6.175 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
New Holland T6.175 Dynamic Command STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, cab climate control, and more. Repair procedures are organized by system and component. The manual also includes fault codes for diagnosing issues.
New Holland T6.165 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, cab climate control, and more. Repair procedures are organized by system and component. The manual also includes fault codes for diagnosing issues.
New Holland T6.160 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, climate control, steering, brakes, hitches and 3-point linkage. The manual is intended to be used as a reference for technicians servicing these tractor models. It provides an overview of components, operating principles and troubleshooting information for each system.
New Holland T6.125 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
New Holland T6.145 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland T6.180 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland T6.165 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland T6.175 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
New Holland T6.175 Dynamic Command STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, cab climate control, and more. Repair procedures are organized by system and component. The manual also includes fault codes for diagnosing issues.
New Holland T6.165 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, cab climate control, and more. Repair procedures are organized by system and component. The manual also includes fault codes for diagnosing issues.
New Holland T6.160 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine and fuel system, transmission, axles, hydraulics, electrical system, climate control, steering, brakes, hitches and 3-point linkage. The manual is intended to be used as a reference for technicians servicing these tractor models. It provides an overview of components, operating principles and troubleshooting information for each system.
New Holland T6.125 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
New Holland T6.145 AutoCommand™ STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
JCB JS200JS210JS220 Tracked Excavator Service Repair Manual SN 01782453 to 01...ufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS160JS180 Tracked Excavator Service Repair Manual SN 01776500 to 0177749...ufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS145 Tracked Excavator Service Repair Manual SN 01786864 to 01788884.pdfufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS130 Tracked Excavator Service Repair Manual SN 01786463 to 01786863.pdfufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS115 Tracked Excavator Service Repair Manual SN01786452 to 01786462.pdfufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates, engine identification numbers, FOPS and ROPS data plates. It also provides tables of torque settings for zinc plated, Dacromet and metric grade fasteners used on JCB machines. Instructions are given to use the appropriate torque settings depending on the type of fastener.
JCB 535-67 Telescopic Handler Service Repair Manual SN 572775.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-120 Telescopic Handler Service Repair Manual SN 562601.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists specifications such as fluid types and quantities for items like the fuel tank, engine oil, transmission fluid, hydraulic fluid, grease points and more. Torque settings and schedules for servicing are also included.
JCB 530-110 Telescopic Handler Service Repair Manual SN 563359.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-95 Telescopic Handler Service Repair Manual SN564980.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists specifications such as fluid types and quantities for items like the fuel tank, engine oil, transmission fluid, hydraulic fluid, grease points and more. Torque settings and schedules for servicing are also included.
JCB 4DX Backhoe Loader Service Repair Manual.pdfufjsjekmdd8di
This service manual provides information on routine maintenance procedures for a JCB 4DX backhoe loader, including:
1. Greasing procedures for the loader arms, backhoe, front and rear axles, propshafts, clam shovel, and other components at regular intervals.
2. Procedures for cleaning the pre-cleaner and replacing the engine air filter elements.
3. Checking engine oil levels and changing the engine oil and filter.
4. Inspecting and adjusting tension on the fan belt as needed.
5. Additional sections cover coolant types, engine preservation when idle, oiling control levers, and other maintenance tasks.
JCB 1CX (series 1) Backhoe Loader Service Repair Manual SN751600 and up.pdfufjsjekmdd8di
This document provides information about identifying JCB machines and their components. It discusses machine identification plates that contain serial numbers for the machine and major units. It also describes typical engine identification numbers. The document outlines torque settings for different types of fasteners used on JCB machines, such as zinc plated and Dacromet fasteners. Tables are included that specify torque values based on fastener size, grade, and lubrication conditions.
New Holland T6.165 Dynamic Command STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
Clark GPX 50E Forklift Service Repair Manual.pdfufjsjekmdd8di
The service manual includes new information for overhauling the GM Vortec V-6 engine and new truck specifications. It also contains applicable sections carried over from the previous manual, SM593, with footers on those pages remaining unchanged. The manual provides maintenance and repair instructions for Clark lift trucks models GPX 35/40/50E.
Clark GPX 40 Forklift Service Repair Manual.pdfufjsjekmdd8di
The service manual includes new information for overhauling the GM Vortec V-6 engine and new truck specifications. It also contains applicable sections carried over from the previous manual, SM593, with footers on those pages remaining unchanged. The manual provides maintenance and repair instructions for Clark lift trucks models GPX 35/40/50E.
New Holland T6.175 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab components, and more. Repair procedures are organized by system with section numbers provided for each subsystem. The manual also includes an index of fault codes to assist with troubleshooting.
This document provides safety precautions and instructions for maintenance personnel working on a crawler loader. It outlines general safety rules including wearing protective equipment, blocking the machine securely before working underneath, releasing hydraulic pressure, and disconnecting the battery. The document describes hazards such as hot or pressurized components, moving parts, and working in the vicinity of the battery. Maintenance personnel are instructed to clean the work area, stop the engine, and secure any opened panels or covers.
New Holland T6.180 Dynamic Command STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
Clark GPX 35 Forklift Service Repair Manual.pdfufjsjekmdd8di
The service manual includes new information for overhauling the GM Vortec V-6 engine and new truck specifications. It also contains applicable sections carried over from the previous manual, SM593, with footers on those pages remaining unchanged. The manual provides maintenance and repair instructions for Clark lift trucks models GPX 35/40/50E.
1. Stop the engine and remove the key before performing any maintenance to prevent accidental starting. Attach a "DO NOT OPERATE" tag to controls.
2. Wear appropriate protective equipment like gloves, glasses and hearing protection when working on or around the machine.
3. Release all pressure from hydraulic systems before disconnecting lines or removing caps and filters to prevent fluid from spraying out under pressure.
New Holland T6.155 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
JCB JS200JS210JS220 Tracked Excavator Service Repair Manual SN 01782453 to 01...ufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS160JS180 Tracked Excavator Service Repair Manual SN 01776500 to 0177749...ufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS145 Tracked Excavator Service Repair Manual SN 01786864 to 01788884.pdfufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS130 Tracked Excavator Service Repair Manual SN 01786463 to 01786863.pdfufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates that contain the serial number and product identification number. It also describes typical identification numbers found on engine plates and other components. The document outlines torque settings for different types of fasteners used on JCB machines, distinguishing between zinc plated and Dacromet fasteners. Tables of torque settings are provided for UNF and metric grade bolts under lubricated and unlubricated conditions.
JCB JS115 Tracked Excavator Service Repair Manual SN01786452 to 01786462.pdfufjsjekmdd8di
This document provides information about identifying JCB excavator models and their components. It discusses machine identification plates, engine identification numbers, FOPS and ROPS data plates. It also provides tables of torque settings for zinc plated, Dacromet and metric grade fasteners used on JCB machines. Instructions are given to use the appropriate torque settings depending on the type of fastener.
JCB 535-67 Telescopic Handler Service Repair Manual SN 572775.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-120 Telescopic Handler Service Repair Manual SN 562601.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists specifications such as fluid types and quantities for items like the fuel tank, engine oil, transmission fluid, hydraulic fluid, grease points and more. Torque settings and schedules for servicing are also included.
JCB 530-110 Telescopic Handler Service Repair Manual SN 563359.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-95 Telescopic Handler Service Repair Manual SN564980.pdfufjsjekmdd8di
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists specifications such as fluid types and quantities for items like the fuel tank, engine oil, transmission fluid, hydraulic fluid, grease points and more. Torque settings and schedules for servicing are also included.
JCB 4DX Backhoe Loader Service Repair Manual.pdfufjsjekmdd8di
This service manual provides information on routine maintenance procedures for a JCB 4DX backhoe loader, including:
1. Greasing procedures for the loader arms, backhoe, front and rear axles, propshafts, clam shovel, and other components at regular intervals.
2. Procedures for cleaning the pre-cleaner and replacing the engine air filter elements.
3. Checking engine oil levels and changing the engine oil and filter.
4. Inspecting and adjusting tension on the fan belt as needed.
5. Additional sections cover coolant types, engine preservation when idle, oiling control levers, and other maintenance tasks.
JCB 1CX (series 1) Backhoe Loader Service Repair Manual SN751600 and up.pdfufjsjekmdd8di
This document provides information about identifying JCB machines and their components. It discusses machine identification plates that contain serial numbers for the machine and major units. It also describes typical engine identification numbers. The document outlines torque settings for different types of fasteners used on JCB machines, such as zinc plated and Dacromet fasteners. Tables are included that specify torque values based on fastener size, grade, and lubrication conditions.
New Holland T6.165 Dynamic Command STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
Clark GPX 50E Forklift Service Repair Manual.pdfufjsjekmdd8di
The service manual includes new information for overhauling the GM Vortec V-6 engine and new truck specifications. It also contains applicable sections carried over from the previous manual, SM593, with footers on those pages remaining unchanged. The manual provides maintenance and repair instructions for Clark lift trucks models GPX 35/40/50E.
Clark GPX 40 Forklift Service Repair Manual.pdfufjsjekmdd8di
The service manual includes new information for overhauling the GM Vortec V-6 engine and new truck specifications. It also contains applicable sections carried over from the previous manual, SM593, with footers on those pages remaining unchanged. The manual provides maintenance and repair instructions for Clark lift trucks models GPX 35/40/50E.
New Holland T6.175 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab components, and more. Repair procedures are organized by system with section numbers provided for each subsystem. The manual also includes an index of fault codes to assist with troubleshooting.
This document provides safety precautions and instructions for maintenance personnel working on a crawler loader. It outlines general safety rules including wearing protective equipment, blocking the machine securely before working underneath, releasing hydraulic pressure, and disconnecting the battery. The document describes hazards such as hot or pressurized components, moving parts, and working in the vicinity of the battery. Maintenance personnel are instructed to clean the work area, stop the engine, and secure any opened panels or covers.
New Holland T6.180 Dynamic Command STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
Clark GPX 35 Forklift Service Repair Manual.pdfufjsjekmdd8di
The service manual includes new information for overhauling the GM Vortec V-6 engine and new truck specifications. It also contains applicable sections carried over from the previous manual, SM593, with footers on those pages remaining unchanged. The manual provides maintenance and repair instructions for Clark lift trucks models GPX 35/40/50E.
1. Stop the engine and remove the key before performing any maintenance to prevent accidental starting. Attach a "DO NOT OPERATE" tag to controls.
2. Wear appropriate protective equipment like gloves, glasses and hearing protection when working on or around the machine.
3. Release all pressure from hydraulic systems before disconnecting lines or removing caps and filters to prevent fluid from spraying out under pressure.
New Holland T6.155 STAGE IV Tractor Service Repair Manual.pdfufjsjekmdd8di
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. SERVICE MANUAL
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666744 24/01/2020
EN
3. Link Product / Engine
Product Market Product Engine
T6.145 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
Europe F4DFE414W*B001
T6.155 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
Europe F4DFE414X*B001
T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
Europe F4DFE414Y*B001
T6.175 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
Europe F4DFE414Z*B001
T6.180 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*JEG01001 - ]
Europe F4DFE614G*B002
T6.125 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
Europe F4DFE414D*B002
T6.145 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
Europe F4DFE4134*B011
T6.145 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
Europe F4DFE414W*B001
T6.155 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
Europe F4DFE4133*B014
T6.155 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
Europe F4DFE414X*B001
T6.160 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
Europe F4DFE614B*B002
T6.165 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
Europe F4DFE4132*B010
T6.165 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
Europe F4DFE414Y*B001
51666744 24/01/2020
4. Product Market Product Engine
T6.175 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
Europe F4DFE4131*B015
T6.175 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
Europe F4DFE414Z*B001
T6.180 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
Europe F4DFE6132*B007
T6.180 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
Europe F4DFE614G*B002
51666744 24/01/2020
11. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND Sales and Service Networks.
51666744 24/01/2020
3
12. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
51666744 24/01/2020
4
13. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51666744 24/01/2020
9
14. SERVICE MANUAL
Engine
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666744 24/01/2020
10
15. Engine - Engine and crankcase
Engine - Remove
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
WE
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ]
WE
T6.145 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
WE
T6.155 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6155*HEG01001 - ]
WE
T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
WE
T6.160 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
WE
T6.165 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6165*HEG01001 - ]
WE
T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
WE
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ]
WE
T6.175 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
WE
T6.180 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6180*HEG01001 - ]
WE
T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
WE
Prior operation:
Discharge the air conditioning system, see Air conditioning - Discharging (50.200) Air conditioning - Evacuate
(50.200).
Prior operation:
Disconnect the battery, see Battery - Disconnect (55.302)
Prior operation:
Remove the left-hand fuel tank, see Fuel tank - Remove (10.216)
Prior operation:
Remove the engine hood, see Hood - Remove (90.100)
Prior operation:
Remove the front frame, see Front frame - Remove (39.100)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, see Selective Catalytic Reduction (SCR) muffler and cat-
alyst - Remove (10.500)
Prior operation:
Remove the coolant control valve, see Coolant control valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
51666744 24/01/2020
10.1 [10.001] / 3
16. Engine - Engine and crankcase
NOTICE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that
generate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors.
Avoid using these tools during any service procedure in close proximity of emission sensors. If the use of these tools
cannot be avoided, remove the sensors using extreme caution prior to performing any service procedure.
All Vehicles
1. Drain the transmission oil.
A. Remove the transmission housing drain plug and
drain the transmission oil into a suitable container.
B. Install the drain plug and torque to 68 – 82 N·m (50
– 60 lb ft).
BAIL14TR00962AB 1
2. Disconnect the oil cooler supply and return pipes.
BAIL14TR00882AB 2
3. Remove the oil cooler supply and return pipes.
BAIL14TR00883AB 3
51666744 24/01/2020
10.1 [10.001] / 4
17. Engine - Engine and crankcase
4. • Disconnect the alternator electrical connector.
• Disconnect the in-line electrical connector.
BAIL14TR00936AB 4
5. Remove the side panel mounting bracket.
BAIL14TR00937AB 5
6. Remove the starter motor shield.
A. Cut the cable ties.
B. Remove the starter motor shield retaining bolts.
BAIL14TR00938AB 6
7. Disconnect the starter motor electrical connectors.
BAIL14TR00884AB 7
51666744 24/01/2020
10.1 [10.001] / 5
18. Engine - Engine and crankcase
8. 1. Disconnect the starter motor negative terminal.
2. Disconnect the cab heater supply pipe.
3. Detach the cab heater supply pipe.
BAIL14TR00885AB 8
9. Detach the cab heater supply pipe.
BAIL14TR00886AB 9
10. Disconnect the block heater electrical connector (if fit-
ted).
BAIL14TR00887AB 10
11. Disconnect the heater supply hose from the rear of the
cylinder head.
BAIL12APH145AVA 11
51666744 24/01/2020
10.1 [10.001] / 6
19. Engine - Engine and crankcase
12. Disconnect the engine breather pipe.
BAIL14TR00888AB 12
13. 1. Disconnect the brake fluid reservoir electrical con-
nector.
2. Remove the brake fluid reservoir heat shield.
BAIL15TR00026AA 13
14. Detach the brake fluid reservoir and position it to one
side.
BAIL14TR00939AB 14
15. Disconnect the steering pipes.
NOTE: Mark the pipes to aid installation.
BAIL14TR00940AB 15
51666744 24/01/2020
10.1 [10.001] / 7
20. Engine - Engine and crankcase
16. Remove the fuel line.
BAIL14TR00941AB 16
17. 1. Disconnect the electrical connector (1).
2. Detach the wiring harness (2) from the bracket.
3. Remove the bracket.
BAIL14TR00943AB 17
18. Disconnect the A/C compressor high pressure pipe
and position it to one side.
BAIL14TR00970AB 18
19. Disconnect the water-in-fuel electrical connector.
BAIL14TR00948AB 19
51666744 24/01/2020
10.1 [10.001] / 8
21. Engine - Engine and crankcase
20. Disconnect the differential lock supply pipe.
BAIL14TR00949AB 20
21. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
3. Cut the cable tie.
NOTICE: Seal all openings using clean blanking plugs.
BAIL14TR00950AB 21
22. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
BAIL14TR00952AB 22
23. 1. Disconnect the intake air temperature (IAT) sen-
sor electrical connector.
2. Disconnect the air cleaner sensor electrical con-
nectors.
BAIL14TR00971AB 23
51666744 24/01/2020
10.1 [10.001] / 9
22. Engine - Engine and crankcase
24. Disconnect the DEF/ADBLUE® dosing module electri-
cal connector.
BAIL14TR00954AB 24
25. Disconnect the nitrogen oxide (NOx) module electrical
connector.
BAIL14TR00972AB 25
26. 1. Detach the wiring harness from the clips.
2. Disconnect the in-line electrical connector.
BAIL14TR00964AB 26
27. Detach the engine emission filter.
A. Disconnect the engine emission hose (1) from the
bottom of the engine emission filter.
B. Remove the engine emission filter retaining bolts
(2).
C. Detach the engine emission hose (3) from the
retaining clip.
BAIL14TR00973AC 27
51666744 24/01/2020
10.1 [10.001] / 10
23. Engine - Engine and crankcase
28. • Disconnect the coolant expansion tank lower hose.
• Disconnect the exhaust flap coolant hose.
• Disconnect the turbocharger air intake tube.
BAIL14TR00974AB 28
29. 1. Disconnect the coolant line from the DEF/
ADBLUE® dosing module.
2. Disconnect the DEF/ADBLUE® lines from the
DEF/ADBLUE® dosing module.
BAIL14TR00975AB 29
30. Remove the air cleaner frame retaining bolts.
BAIL14TR00976AB 30
31. With the aid of another technician, remove the air
cleaner frame.
BAIL14TR00986AB 31
51666744 24/01/2020
10.1 [10.001] / 11
24. Engine - Engine and crankcase
32. Remove the DEF/ADBLUE® lines.
BAIL14TR00977AB 32
33. 1. Disconnect the turbocharger oil pipes.
2. Disconnect the turbocharger electrical connector.
3.
BAIL14TR00978AB 33
34. 1. Disconnect the exhaust flap to turbocharger
clamp.
2. Remove the turbocharger mounting bracket re-
taining bolts.
BAIL14TR00987AB 34
35. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining nuts.
BAIL14TR00988AB 35
51666744 24/01/2020
10.1 [10.001] / 12
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Engine - Engine and crankcase
36. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining bolts.
3. Remove the engine upper frame retaining nuts.
BAIL14TR00989AB 36
37. Remove the engine upper frame retaining bolts.
BAIL14TR00990AB 37
38. Using suitable lifting equipment, remove the engine
upper frame and diesel oxidation catalyst (DOC) as-
sembly.
BAIL15TR00019AA 38
39. Remove the fuel line from the rear of the cylinder
head.
BAIL15TR00020AA 39
51666744 24/01/2020
10.1 [10.001] / 13
27. Engine - Engine and crankcase
40. Detach the grid heater relay and position it to one side.
BAIL15TR00021AA 40
41. Remove the engine rear frame right-hand side retain-
ing bolts.
BAIL15TR00022AA 41
42. Remove the engine rear frame.
BAIL15TR00023AA 42
43. Disconnect the steering motor pipes.
BAIL15TR00024AA 43
51666744 24/01/2020
10.1 [10.001] / 14
28. Engine - Engine and crankcase
44. Install three engine lifting eyes 380200013.
BAIL07APH141BVA 44
45. Remove the engine to transmission lower inner retain-
ing bolts.
BAIL14TR00968AB 45
46. Remove the engine to transmission lower outer retain-
ing bolts.
BAIL14TR00969AB 46
51666744 24/01/2020
10.1 [10.001] / 15