This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with component level details provided. The manual is intended to be used as a technical reference for technicians servicing Case IH T6 tractors.
Caterpillar cat 962 g wheel loader (prefix 7bw) service repair manual (7bw000...udjjjsjekkdm
This document provides instructions for assembling and disassembling the torque converter and transmission on a Caterpillar 962G wheel loader. It describes 38 steps to assemble the torque converter, including installing bearings, seals, gears, and housing components in the proper order and torque specifications. It also describes separating the transmission from the torque converter and output gears, as well as 11 steps for disassembling the transmission planetary, including removing clutch plates, seals, and housing components. The document contains diagrams illustrating each step for servicing these powertrain components.
Case tv450 tier 4 b (final) alpha series compact track loader service repair ...udjjjsjekkdm
This service manual provides information for servicing the TV450 Tier 4B (final) compact track loader. It contains sections covering the engine, power coupling, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform and bodywork. The document provides detailed procedures, part numbers, and diagrams for maintenance and repair of the machine.
New holland t6.145 stage iv tractor service repair manualudjjjsjekkdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with section numbers provided for each subsystem. The manual also includes an introduction, contents listing, and fault code sections.
New holland t6.145 dynamic command stage iv tractor service repair manualudjjjsjekkdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, steering, brakes, HVAC, and other components. The manual includes sections on maintenance, troubleshooting, removal and installation procedures.
New holland 9090 x side conveyor grape harvester service repair manual (europe)udjjjsjekkdm
This service manual provides information on servicing the following components of 9090X grape harvesters:
- The engine and crankcase, including the engine frame, flex disc, pumps, and servo belt.
- The fuel system, including the fuel tanks.
- The cooling system, including coolant, radiators, and the water pump.
- Exhaust treatment systems like selective catalytic reduction.
- Additional engine systems such as the air cleaner, lubrication, and electrical starting.
It also covers servicing hydraulic, electrical, cab climate control, and other harvester systems. The manual is intended
to be used by qualified service technicians and includes part numbers, diagrams, and maintenance procedures.
New holland 9090 x olive tier 3 grape harvester service repair manualudjjjsjekkdm
This service manual provides information for servicing and repairing the 9090X Olive Side Conveyor TIER 3 agricultural machine. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and safety procedures. The manual contains detailed component information, diagrams, specifications, and repair instructions.
New holland 9090 x olive side conveyor tier 3 grape harvester service repair ...udjjjsjekkdm
This service manual provides information for servicing and repairing the 9090X Olive Side Conveyor TIER 3 agricultural machine. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and safety rules. The manual contains part numbers, diagrams, specifications, and repair instructions for maintaining and fixing issues with the various components and systems of the 9090X Olive Side Conveyor TIER 3.
New holland 9090 x olive side conveyor grape harvester service repair manual ...udjjjsjekkdm
Support the air filter and frame assembly.
2. Loosen the air filter clamp (1).
3. Remove the air filter and frame assembly.
COIL14GR00228AC 11
12. 1. Disconnect the fuel supply line (1).
2. Disconnect the fuel return line (2).
3. Disconnect the electrical connector (3).
COIL14GR00229AC 12
13. 1. Disconnect the fuel supply line (1).
2. Disconnect the fuel return line (2).
3. Disconnect the electrical connector (3).
COIL14GR00230AC 13
51697893 01/11/2019
10.1 [10.
Caterpillar cat 962 g wheel loader (prefix 7bw) service repair manual (7bw000...udjjjsjekkdm
This document provides instructions for assembling and disassembling the torque converter and transmission on a Caterpillar 962G wheel loader. It describes 38 steps to assemble the torque converter, including installing bearings, seals, gears, and housing components in the proper order and torque specifications. It also describes separating the transmission from the torque converter and output gears, as well as 11 steps for disassembling the transmission planetary, including removing clutch plates, seals, and housing components. The document contains diagrams illustrating each step for servicing these powertrain components.
Case tv450 tier 4 b (final) alpha series compact track loader service repair ...udjjjsjekkdm
This service manual provides information for servicing the TV450 Tier 4B (final) compact track loader. It contains sections covering the engine, power coupling, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform and bodywork. The document provides detailed procedures, part numbers, and diagrams for maintenance and repair of the machine.
New holland t6.145 stage iv tractor service repair manualudjjjsjekkdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, cab climate control and more. Repair procedures are organized by system with section numbers provided for each subsystem. The manual also includes an introduction, contents listing, and fault code sections.
New holland t6.145 dynamic command stage iv tractor service repair manualudjjjsjekkdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor including the engine, transmission, axles, hydraulics, electrical systems, steering, brakes, HVAC, and other components. The manual includes sections on maintenance, troubleshooting, removal and installation procedures.
New holland 9090 x side conveyor grape harvester service repair manual (europe)udjjjsjekkdm
This service manual provides information on servicing the following components of 9090X grape harvesters:
- The engine and crankcase, including the engine frame, flex disc, pumps, and servo belt.
- The fuel system, including the fuel tanks.
- The cooling system, including coolant, radiators, and the water pump.
- Exhaust treatment systems like selective catalytic reduction.
- Additional engine systems such as the air cleaner, lubrication, and electrical starting.
It also covers servicing hydraulic, electrical, cab climate control, and other harvester systems. The manual is intended
to be used by qualified service technicians and includes part numbers, diagrams, and maintenance procedures.
New holland 9090 x olive tier 3 grape harvester service repair manualudjjjsjekkdm
This service manual provides information for servicing and repairing the 9090X Olive Side Conveyor TIER 3 agricultural machine. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and safety procedures. The manual contains detailed component information, diagrams, specifications, and repair instructions.
New holland 9090 x olive side conveyor tier 3 grape harvester service repair ...udjjjsjekkdm
This service manual provides information for servicing and repairing the 9090X Olive Side Conveyor TIER 3 agricultural machine. It includes sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and safety rules. The manual contains part numbers, diagrams, specifications, and repair instructions for maintaining and fixing issues with the various components and systems of the 9090X Olive Side Conveyor TIER 3.
New holland 9090 x olive side conveyor grape harvester service repair manual ...udjjjsjekkdm
Support the air filter and frame assembly.
2. Loosen the air filter clamp (1).
3. Remove the air filter and frame assembly.
COIL14GR00228AC 11
12. 1. Disconnect the fuel supply line (1).
2. Disconnect the fuel return line (2).
3. Disconnect the electrical connector (3).
COIL14GR00229AC 12
13. 1. Disconnect the fuel supply line (1).
2. Disconnect the fuel return line (2).
3. Disconnect the electrical connector (3).
COIL14GR00230AC 13
51697893 01/11/2019
10.1 [10.
This service manual provides descriptions of the major systems of the Komatsu PC5500 hydraulic excavator. It describes the construction and functions of the main assembly groups, including:
1. The superstructure, which contains the operator's cab, engines, hydraulic components, fuel and oil reservoirs, and counterweight.
2. The hydraulic oil cooler and radiators that are used to cool engine oil and hydraulic fluid.
3. The fuel tank and hydraulic oil reservoir that supply fuel and hydraulic fluid to the machine.
The manual explains how to find information on specific components and functions, and provides illustrations and part numbers to aid in maintenance and repairs. It is intended to help technicians service the machine safely and effectively
The document provides information on the drive assembly of a hydraulic mining shovel, including:
1. The drive unit consists of two engines and two pump distributor gears bolted to the power frame, with flexible couplings connecting the engines to the gears.
2. The engine and pump distributor gear mounts include flexible bearings to absorb vibrations, with instructions provided to check the mounts and bearings.
3. The flexible couplings between the engines and gears help reduce torsional vibrations using leaf springs and oil damping.
4. The air filter system includes main and safety filter elements monitored by a maintenance switch.
The document is a service manual for a hydraulic mining shovel. It provides instructions for assembly, maintenance, and repair of the machine's major systems. The manual includes sections on technical data, assembly procedures, components, pumps, hydraulics, and electrical systems. Safety notices are provided at the beginning to ensure safe service and repair techniques.
The document is a service manual for a hydraulic mining shovel. It provides instructions for assembly, maintenance, and repair of the machine's major systems. The manual includes sections on technical data, assembly procedures, components, pumps, hydraulics, and other systems. Safety notices are included at the beginning to warn technicians of hazards involved with service and repair work.
This service manual provides instructions for servicing and maintaining a Komatsu PC4000-6 hydraulic mining shovel. It contains sections on technical specifications, assembly procedures, components, hydraulic and electrical systems, lubrication systems, and safety notices. Each section includes detailed tables of contents to help technicians find the information they need. Komatsu recommends contacting your distributor for the latest revision if revising this publication.
This service manual provides instructions for servicing a Komatsu PC4000-6 hydraulic mining shovel. It contains sections on the machine's main assembly groups, technical data, assembly procedures, components, hydraulic and electrical systems, lubrication systems, and appendices. Each section includes detailed tables of contents to help technicians easily find the information they need. The manual corresponds to the state of the machine's development at the time of publication.
Kioti daedong dk902 c tractor service repair manualudjjjsjekkdm
The document is a workshop manual for DK752C/DK902C tractors. It provides specifications, service procedures, and repair instructions for the tractors. The manual contains chapters covering safety, the engine, clutch, transmission, rear axle, brakes, front axle, steering, hydraulics, electrical systems, cabin, air conditioning, and an index. Safety is the first chapter and emphasizes wearing protective equipment, avoiding fires, and being cautious of high pressure systems and hazardous materials. The engine chapter provides the engine specifications, component details, lubrication and other systems. Tightening torques are also included.
Kioti daedong dk752 c tractor service repair manualudjjjsjekkdm
The document is a workshop manual for DK752C/DK902C tractors. It provides specifications, service procedures, and repair instructions for the tractors. The manual contains chapters covering safety, the engine, clutch, transmission, rear axle, brakes, front axle, steering, hydraulics, electrical systems, cabin, air conditioning, and an index. Safety is the first chapter and emphasizes proper protective equipment, fire prevention, and handling hazardous materials safely. The engine chapter provides the engine specifications, component details, lubrication and other systems. Tightening torques are also included.
Kawasaki 115 z7 wheel loader service repair manualudjjjsjekkdm
The document provides instructions to remove and install the cab assembly on a wheel loader. Key steps include:
- Disconnecting electrical and hydraulic connections and removing mounting bolts and nuts.
- Using slings and eyebolts to lift the heavy cab assembly off the rear chassis and place it on wooden blocks.
- Reversing the removal steps to install the cab assembly, reconnecting all electrical and hydraulic components and tightening mounting hardware. Precautions are listed to handle the heavy weight safely and properly bleed air from lines.
This document is a parts catalog for a 115Z7 wheel loader powered by an ISUZU 6WG1 engine. It lists parts for the rear axle, propeller shaft, power train, engine, cooling system, fuel system, air intake system, exhaust system, cab, chassis, hydraulic system, electrical system, and other components. The parts are organized by component and include the part name and number.
Jcb 525 58 and 525-67 basic servo options telescopic handler service repair m...udjjjsjekkdm
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
Jcb 525 58 and 525-58 farm special telescopic handler service repair manual s...udjjjsjekkdm
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
Jcb 446 wheeled loading shovel service repair manual sn 540000 to 540011udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It begins with important notices about reading the operator's manual and understanding safety warnings. There is then a safety check list covering general safety, operating safety, and maintenance safety. The document also describes safety labels found on the machines and provides their part numbers. The goal is to inform service technicians of hazards involved with working on these machines so that injuries can be prevented.
Jcb 437 wheeled loading shovel service repair manual sn 533001udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It begins with important notices about reading the operator's manual and understanding safety warnings. There is then a safety check list covering general safety, operating safety, and maintenance safety. The document also identifies and provides part numbers for safety labels found on the machines. Maintaining safety is critical for protecting yourself and others from injury when operating or servicing these machines.
Jcb 436 wheeled loading shovel service repair manual sn 533001udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It discusses the importance of following safety warnings and guidelines to prevent injury to yourself and others. Specific safety topics covered include general safety practices, operating safely, and maintenance safety. Safety labels on the machine are also described to ensure proper understanding of hazard warnings. Maintaining awareness of all safety notices is critical for working on these machines.
Jcb 435 wheeled loading shovel service repair manual sn 533001udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It discusses the importance of following safety warnings and guidelines to prevent injury to operators and others. Specific safety topics covered include general safety practices, operating safely, and maintenance safety. Safety labels on the machine are also described to ensure proper understanding of hazards. Overall the document stresses prioritizing safety above all else when working on or operating JCB wheeled loading shovels.
Caterpillar cat 962 h wheel loader (prefix ssa) service repair manual (ssa000...udjjjsjekkdm
This document provides instructions for assembling and disassembling components of the torque converter and transmission for a Caterpillar 962H wheel loader. It describes in detail the 29 steps to disassemble the transmission planetary, including removing housing components, seals, gears, shafts, and other internal parts. Tools required are listed. Pictures and diagrams accompany each step for clarity. The overall document provides a comprehensive technical service manual for servicing the power train of this wheel loader model.
Caterpillar cat 962 h wheel loader (prefix mal) service repair manual (mal000...udjjjsjekkdm
The document provides instructions for separating the torque converter from the transmission and output transfer gears of a 962H wheel loader. It is a 3-part process:
1. Remove the torque converter, transmission, and output transfer gears as a unit from the vehicle.
2. Attach lifting brackets and carefully separate the torque converter from the transmission and output transfer gears.
3. Finish disassembling the individual components of the torque converter for inspection or replacement of parts. Cleanliness is important during disassembly and reassembly to prevent contamination.
Caterpillar cat 962 h wheel loader (prefix m3g) service repair manual (m3g000...udjjjsjekkdm
This document provides instructions for disassembling and assembling the piston pump of a 962H wheel loader. It gives detailed steps for disassembling components like valves, spools, plugs, springs, and bearings. It then describes the assembly process in reverse order, noting things like applying the correct torque to bolts and checking axial shaft end play. The overall document provides a technical service manual for maintenance and repair work on the loader's steering pump.
Caterpillar cat 962 h wheel loader (prefix k6k) service repair manual (k6k000...udjjjsjekkdm
The document provides instructions for disassembling and assembling the pilot valve of the command control steering system on a 962H wheel loader. The removal procedure involves releasing system pressure, disconnecting hoses and removing bolts to access the pilot valve. Disassembly of the pilot valve includes removing O-rings, springs, and using tools to separate components. Assembly is the reverse of disassembly, applying clean oil to seals and torquing bolts to specification. Special care and tools are required when handling springs.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
This service manual provides descriptions of the major systems of the Komatsu PC5500 hydraulic excavator. It describes the construction and functions of the main assembly groups, including:
1. The superstructure, which contains the operator's cab, engines, hydraulic components, fuel and oil reservoirs, and counterweight.
2. The hydraulic oil cooler and radiators that are used to cool engine oil and hydraulic fluid.
3. The fuel tank and hydraulic oil reservoir that supply fuel and hydraulic fluid to the machine.
The manual explains how to find information on specific components and functions, and provides illustrations and part numbers to aid in maintenance and repairs. It is intended to help technicians service the machine safely and effectively
The document provides information on the drive assembly of a hydraulic mining shovel, including:
1. The drive unit consists of two engines and two pump distributor gears bolted to the power frame, with flexible couplings connecting the engines to the gears.
2. The engine and pump distributor gear mounts include flexible bearings to absorb vibrations, with instructions provided to check the mounts and bearings.
3. The flexible couplings between the engines and gears help reduce torsional vibrations using leaf springs and oil damping.
4. The air filter system includes main and safety filter elements monitored by a maintenance switch.
The document is a service manual for a hydraulic mining shovel. It provides instructions for assembly, maintenance, and repair of the machine's major systems. The manual includes sections on technical data, assembly procedures, components, pumps, hydraulics, and electrical systems. Safety notices are provided at the beginning to ensure safe service and repair techniques.
The document is a service manual for a hydraulic mining shovel. It provides instructions for assembly, maintenance, and repair of the machine's major systems. The manual includes sections on technical data, assembly procedures, components, pumps, hydraulics, and other systems. Safety notices are included at the beginning to warn technicians of hazards involved with service and repair work.
This service manual provides instructions for servicing and maintaining a Komatsu PC4000-6 hydraulic mining shovel. It contains sections on technical specifications, assembly procedures, components, hydraulic and electrical systems, lubrication systems, and safety notices. Each section includes detailed tables of contents to help technicians find the information they need. Komatsu recommends contacting your distributor for the latest revision if revising this publication.
This service manual provides instructions for servicing a Komatsu PC4000-6 hydraulic mining shovel. It contains sections on the machine's main assembly groups, technical data, assembly procedures, components, hydraulic and electrical systems, lubrication systems, and appendices. Each section includes detailed tables of contents to help technicians easily find the information they need. The manual corresponds to the state of the machine's development at the time of publication.
Kioti daedong dk902 c tractor service repair manualudjjjsjekkdm
The document is a workshop manual for DK752C/DK902C tractors. It provides specifications, service procedures, and repair instructions for the tractors. The manual contains chapters covering safety, the engine, clutch, transmission, rear axle, brakes, front axle, steering, hydraulics, electrical systems, cabin, air conditioning, and an index. Safety is the first chapter and emphasizes wearing protective equipment, avoiding fires, and being cautious of high pressure systems and hazardous materials. The engine chapter provides the engine specifications, component details, lubrication and other systems. Tightening torques are also included.
Kioti daedong dk752 c tractor service repair manualudjjjsjekkdm
The document is a workshop manual for DK752C/DK902C tractors. It provides specifications, service procedures, and repair instructions for the tractors. The manual contains chapters covering safety, the engine, clutch, transmission, rear axle, brakes, front axle, steering, hydraulics, electrical systems, cabin, air conditioning, and an index. Safety is the first chapter and emphasizes proper protective equipment, fire prevention, and handling hazardous materials safely. The engine chapter provides the engine specifications, component details, lubrication and other systems. Tightening torques are also included.
Kawasaki 115 z7 wheel loader service repair manualudjjjsjekkdm
The document provides instructions to remove and install the cab assembly on a wheel loader. Key steps include:
- Disconnecting electrical and hydraulic connections and removing mounting bolts and nuts.
- Using slings and eyebolts to lift the heavy cab assembly off the rear chassis and place it on wooden blocks.
- Reversing the removal steps to install the cab assembly, reconnecting all electrical and hydraulic components and tightening mounting hardware. Precautions are listed to handle the heavy weight safely and properly bleed air from lines.
This document is a parts catalog for a 115Z7 wheel loader powered by an ISUZU 6WG1 engine. It lists parts for the rear axle, propeller shaft, power train, engine, cooling system, fuel system, air intake system, exhaust system, cab, chassis, hydraulic system, electrical system, and other components. The parts are organized by component and include the part name and number.
Jcb 525 58 and 525-67 basic servo options telescopic handler service repair m...udjjjsjekkdm
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
Jcb 525 58 and 525-58 farm special telescopic handler service repair manual s...udjjjsjekkdm
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
Jcb 446 wheeled loading shovel service repair manual sn 540000 to 540011udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It begins with important notices about reading the operator's manual and understanding safety warnings. There is then a safety check list covering general safety, operating safety, and maintenance safety. The document also describes safety labels found on the machines and provides their part numbers. The goal is to inform service technicians of hazards involved with working on these machines so that injuries can be prevented.
Jcb 437 wheeled loading shovel service repair manual sn 533001udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It begins with important notices about reading the operator's manual and understanding safety warnings. There is then a safety check list covering general safety, operating safety, and maintenance safety. The document also identifies and provides part numbers for safety labels found on the machines. Maintaining safety is critical for protecting yourself and others from injury when operating or servicing these machines.
Jcb 436 wheeled loading shovel service repair manual sn 533001udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It discusses the importance of following safety warnings and guidelines to prevent injury to yourself and others. Specific safety topics covered include general safety practices, operating safely, and maintenance safety. Safety labels on the machine are also described to ensure proper understanding of hazard warnings. Maintaining awareness of all safety notices is critical for working on these machines.
Jcb 435 wheeled loading shovel service repair manual sn 533001udjjjsjekkdm
This document provides safety information for working on JCB wheeled loading shovels. It discusses the importance of following safety warnings and guidelines to prevent injury to operators and others. Specific safety topics covered include general safety practices, operating safely, and maintenance safety. Safety labels on the machine are also described to ensure proper understanding of hazards. Overall the document stresses prioritizing safety above all else when working on or operating JCB wheeled loading shovels.
Caterpillar cat 962 h wheel loader (prefix ssa) service repair manual (ssa000...udjjjsjekkdm
This document provides instructions for assembling and disassembling components of the torque converter and transmission for a Caterpillar 962H wheel loader. It describes in detail the 29 steps to disassemble the transmission planetary, including removing housing components, seals, gears, shafts, and other internal parts. Tools required are listed. Pictures and diagrams accompany each step for clarity. The overall document provides a comprehensive technical service manual for servicing the power train of this wheel loader model.
Caterpillar cat 962 h wheel loader (prefix mal) service repair manual (mal000...udjjjsjekkdm
The document provides instructions for separating the torque converter from the transmission and output transfer gears of a 962H wheel loader. It is a 3-part process:
1. Remove the torque converter, transmission, and output transfer gears as a unit from the vehicle.
2. Attach lifting brackets and carefully separate the torque converter from the transmission and output transfer gears.
3. Finish disassembling the individual components of the torque converter for inspection or replacement of parts. Cleanliness is important during disassembly and reassembly to prevent contamination.
Caterpillar cat 962 h wheel loader (prefix m3g) service repair manual (m3g000...udjjjsjekkdm
This document provides instructions for disassembling and assembling the piston pump of a 962H wheel loader. It gives detailed steps for disassembling components like valves, spools, plugs, springs, and bearings. It then describes the assembly process in reverse order, noting things like applying the correct torque to bolts and checking axial shaft end play. The overall document provides a technical service manual for maintenance and repair work on the loader's steering pump.
Caterpillar cat 962 h wheel loader (prefix k6k) service repair manual (k6k000...udjjjsjekkdm
The document provides instructions for disassembling and assembling the pilot valve of the command control steering system on a 962H wheel loader. The removal procedure involves releasing system pressure, disconnecting hoses and removing bolts to access the pilot valve. Disassembly of the pilot valve includes removing O-rings, springs, and using tools to separate components. Assembly is the reverse of disassembly, applying clean oil to seals and torquing bolts to specification. Special care and tools are required when handling springs.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. SERVICE MANUAL
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666744 24/01/2020
EN
3. Link Product / Engine
Product Market Product Engine
T6.145 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
Europe F4DFE414W*B001
T6.155 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
Europe F4DFE414X*B001
T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
Europe F4DFE414Y*B001
T6.175 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
Europe F4DFE414Z*B001
T6.180 AutoCommand™
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*JEG01001 - ]
Europe F4DFE614G*B002
T6.125 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
Europe F4DFE414D*B002
T6.145 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
Europe F4DFE4134*B011
T6.145 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
Europe F4DFE414W*B001
T6.155 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
Europe F4DFE4133*B014
T6.155 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
Europe F4DFE414X*B001
T6.160 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
Europe F4DFE614B*B002
T6.165 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
Europe F4DFE4132*B010
T6.165 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
Europe F4DFE414Y*B001
51666744 24/01/2020
4. Product Market Product Engine
T6.175 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
Europe F4DFE4131*B015
T6.175 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
Europe F4DFE414Z*B001
T6.180 Standard - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
Europe F4DFE6132*B007
T6.180 Dynamic Command
Sidewinder II - TIER 4B (FINAL)
and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
Europe F4DFE614G*B002
51666744 24/01/2020
11. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND Sales and Service Networks.
51666744 24/01/2020
3
12. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
51666744 24/01/2020
4
13. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51666744 24/01/2020
9
14. SERVICE MANUAL
Engine
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ], T6.145 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ],
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ], T6.145 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6145*HEG01001 - ], T6.155
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6155*HEG01001 - ], T6.155 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6155*HEG01001
- ], T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ], T6.160 Standard - TIER 4B (FINAL) and STAGE
IV (Mother Regulation) [HACT6160*KEG01001 - ], T6.165 AutoCommand™
Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.165 Dynamic Command Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6165*HEG01001 -
], T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ], T6.175 AutoCommand™ Sidewinder II - TIER
4B (FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ],
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ], T6.175 Standard - TIER 4B
(FINAL) and STAGE IV (Mother Regulation) [HACT6175*HEG01001 - ], T6.180
AutoCommand™ Sidewinder II - TIER 4B (FINAL) and STAGE IV (Mother
Regulation) [HACT6180*JEG01001 - ], T6.180 Dynamic Command Sidewinder
II - TIER 4B (FINAL) and STAGE IV (Mother Regulation) [HACT6180*HEG01001
- ], T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
51666744 24/01/2020
10
15. Engine - Engine and crankcase
Engine - Remove
T6.125 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6125*HEG01001 - ]
WE
T6.145 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6145*HEG01001 - ]
WE
T6.145 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6145*HEG01001 - ]
WE
T6.155 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6155*HEG01001 - ]
WE
T6.155 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6155*HEG01001 - ]
WE
T6.160 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6160*KEG01001 - ]
WE
T6.165 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6165*HEG01001 - ]
WE
T6.165 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6165*HEG01001 - ]
WE
T6.175 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6175*HEG01001 - ]
WE
T6.175 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6175*HEG01001 - ]
WE
T6.180 Dynamic Command Sidewinder II - TIER 4B (FINAL) and STAGE IV
(Mother Regulation) [HACT6180*HEG01001 - ]
WE
T6.180 Standard - TIER 4B (FINAL) and STAGE IV (Mother Regulation)
[HACT6180*HEG01001 - ]
WE
Prior operation:
Discharge the air conditioning system, see Air conditioning - Discharging (50.200) Air conditioning - Evacuate
(50.200).
Prior operation:
Disconnect the battery, see Battery - Disconnect (55.302)
Prior operation:
Remove the left-hand fuel tank, see Fuel tank - Remove (10.216)
Prior operation:
Remove the engine hood, see Hood - Remove (90.100)
Prior operation:
Remove the front frame, see Front frame - Remove (39.100)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, see Selective Catalytic Reduction (SCR) muffler and cat-
alyst - Remove (10.500)
Prior operation:
Remove the coolant control valve, see Coolant control valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
51666744 24/01/2020
10.1 [10.001] / 3
16. Engine - Engine and crankcase
NOTICE: Emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that
generate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors.
Avoid using these tools during any service procedure in close proximity of emission sensors. If the use of these tools
cannot be avoided, remove the sensors using extreme caution prior to performing any service procedure.
All Vehicles
1. Drain the transmission oil.
A. Remove the transmission housing drain plug and
drain the transmission oil into a suitable container.
B. Install the drain plug and torque to 68 – 82 N·m (50
– 60 lb ft).
BAIL14TR00962AB 1
2. Disconnect the oil cooler supply and return pipes.
BAIL14TR00882AB 2
3. Remove the oil cooler supply and return pipes.
BAIL14TR00883AB 3
51666744 24/01/2020
10.1 [10.001] / 4
17. Engine - Engine and crankcase
4. • Disconnect the alternator electrical connector.
• Disconnect the in-line electrical connector.
BAIL14TR00936AB 4
5. Remove the side panel mounting bracket.
BAIL14TR00937AB 5
6. Remove the starter motor shield.
A. Cut the cable ties.
B. Remove the starter motor shield retaining bolts.
BAIL14TR00938AB 6
7. Disconnect the starter motor electrical connectors.
BAIL14TR00884AB 7
51666744 24/01/2020
10.1 [10.001] / 5
18. Engine - Engine and crankcase
8. 1. Disconnect the starter motor negative terminal.
2. Disconnect the cab heater supply pipe.
3. Detach the cab heater supply pipe.
BAIL14TR00885AB 8
9. Detach the cab heater supply pipe.
BAIL14TR00886AB 9
10. Disconnect the block heater electrical connector (if fit-
ted).
BAIL14TR00887AB 10
11. Disconnect the heater supply hose from the rear of the
cylinder head.
BAIL12APH145AVA 11
51666744 24/01/2020
10.1 [10.001] / 6
19. Engine - Engine and crankcase
12. Disconnect the engine breather pipe.
BAIL14TR00888AB 12
13. 1. Disconnect the brake fluid reservoir electrical con-
nector.
2. Remove the brake fluid reservoir heat shield.
BAIL15TR00026AA 13
14. Detach the brake fluid reservoir and position it to one
side.
BAIL14TR00939AB 14
15. Disconnect the steering pipes.
NOTE: Mark the pipes to aid installation.
BAIL14TR00940AB 15
51666744 24/01/2020
10.1 [10.001] / 7
20. Engine - Engine and crankcase
16. Remove the fuel line.
BAIL14TR00941AB 16
17. 1. Disconnect the electrical connector (1).
2. Detach the wiring harness (2) from the bracket.
3. Remove the bracket.
BAIL14TR00943AB 17
18. Disconnect the A/C compressor high pressure pipe
and position it to one side.
BAIL14TR00970AB 18
19. Disconnect the water-in-fuel electrical connector.
BAIL14TR00948AB 19
51666744 24/01/2020
10.1 [10.001] / 8
21. Engine - Engine and crankcase
20. Disconnect the differential lock supply pipe.
BAIL14TR00949AB 20
21. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
3. Cut the cable tie.
NOTICE: Seal all openings using clean blanking plugs.
BAIL14TR00950AB 21
22. 1. Disconnect the in-line electrical connector.
2. Detach the wiring harness from the clip.
BAIL14TR00952AB 22
23. 1. Disconnect the intake air temperature (IAT) sen-
sor electrical connector.
2. Disconnect the air cleaner sensor electrical con-
nectors.
BAIL14TR00971AB 23
51666744 24/01/2020
10.1 [10.001] / 9
22. Engine - Engine and crankcase
24. Disconnect the DEF/ADBLUE® dosing module electri-
cal connector.
BAIL14TR00954AB 24
25. Disconnect the nitrogen oxide (NOx) module electrical
connector.
BAIL14TR00972AB 25
26. 1. Detach the wiring harness from the clips.
2. Disconnect the in-line electrical connector.
BAIL14TR00964AB 26
27. Detach the engine emission filter.
A. Disconnect the engine emission hose (1) from the
bottom of the engine emission filter.
B. Remove the engine emission filter retaining bolts
(2).
C. Detach the engine emission hose (3) from the
retaining clip.
BAIL14TR00973AC 27
51666744 24/01/2020
10.1 [10.001] / 10
23. Engine - Engine and crankcase
28. • Disconnect the coolant expansion tank lower hose.
• Disconnect the exhaust flap coolant hose.
• Disconnect the turbocharger air intake tube.
BAIL14TR00974AB 28
29. 1. Disconnect the coolant line from the DEF/
ADBLUE® dosing module.
2. Disconnect the DEF/ADBLUE® lines from the
DEF/ADBLUE® dosing module.
BAIL14TR00975AB 29
30. Remove the air cleaner frame retaining bolts.
BAIL14TR00976AB 30
31. With the aid of another technician, remove the air
cleaner frame.
BAIL14TR00986AB 31
51666744 24/01/2020
10.1 [10.001] / 11
24. Engine - Engine and crankcase
32. Remove the DEF/ADBLUE® lines.
BAIL14TR00977AB 32
33. 1. Disconnect the turbocharger oil pipes.
2. Disconnect the turbocharger electrical connector.
3.
BAIL14TR00978AB 33
34. 1. Disconnect the exhaust flap to turbocharger
clamp.
2. Remove the turbocharger mounting bracket re-
taining bolts.
BAIL14TR00987AB 34
35. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining nuts.
BAIL14TR00988AB 35
51666744 24/01/2020
10.1 [10.001] / 12
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Engine - Engine and crankcase
36. 1. Remove the engine upper frame retaining bolt.
2. Remove the engine upper frame retaining bolts.
3. Remove the engine upper frame retaining nuts.
BAIL14TR00989AB 36
37. Remove the engine upper frame retaining bolts.
BAIL14TR00990AB 37
38. Using suitable lifting equipment, remove the engine
upper frame and diesel oxidation catalyst (DOC) as-
sembly.
BAIL15TR00019AA 38
39. Remove the fuel line from the rear of the cylinder
head.
BAIL15TR00020AA 39
51666744 24/01/2020
10.1 [10.001] / 13
27. Engine - Engine and crankcase
40. Detach the grid heater relay and position it to one side.
BAIL15TR00021AA 40
41. Remove the engine rear frame right-hand side retain-
ing bolts.
BAIL15TR00022AA 41
42. Remove the engine rear frame.
BAIL15TR00023AA 42
43. Disconnect the steering motor pipes.
BAIL15TR00024AA 43
51666744 24/01/2020
10.1 [10.001] / 14
28. Engine - Engine and crankcase
44. Install three engine lifting eyes 380200013.
BAIL07APH141BVA 44
45. Remove the engine to transmission lower inner retain-
ing bolts.
BAIL14TR00968AB 45
46. Remove the engine to transmission lower outer retain-
ing bolts.
BAIL14TR00969AB 46
51666744 24/01/2020
10.1 [10.001] / 15