This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections for general guidelines, the engine, clutch, transmissions, drive lines, mechanical transmissions, power take-off, brakes, hydraulics, steering, axles and wheels, air conditioning, electrical systems, and the platform/bodywork. Each section provides specifications, diagrams, removal and installation instructions, and troubleshooting information for repair and maintenance of components.
New holland w190 c tier 4 wheel loader service repair manualfujsjfkksekmme
The document provides instructions to remove the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator cap and draining coolant, loosening hydraulic lines, removing the hood, disconnecting wiring harnesses, and removing intake hoses from the engine. The engine is then ready to be lifted out of the machine.
New holland ts125 a tractor service repair manualfujsjfkksekmme
This document provides sections and page numbers for the repair manual for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A and T6010, T6020, T6030, T6050, T6070. It lists 15 sections that are included in the repair manual, such as the engine, clutch, transmission, braking system, and electrical system. It also provides some notes for locating repair information for the new T6000 tractor models within the manual.
New holland tl70 a tractor service repair manualfujsjfkksekmme
This document is a service manual for tractor models TL70A through TL100A. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, views of components, troubleshooting information, and procedures for removal, installation, overhaul, and adjustment of parts.
New holland tk4060 tractor service repair manualfujsjfkksekmme
This service manual provides maintenance and repair instructions for various tractor models including the TK4020F, TK4040, and TK4060. The manual includes sections on the engine, clutch, transmission, rear axle, power take-off, brakes, hydraulics, steering, tracks, electrical systems, and cab/body. The document provides detailed procedures and specifications for removing and servicing components of the tractors.
New holland tk4050 m tractor service repair manualfujsjfkksekmme
This service manual section provides instructions for removing the engine from tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. The removal process requires first removing the clutch and then draining fluids before detaching various engine components and pipes. Safety precautions are provided, and notes call out differences when removing engines with NEF versus F5A configurations.
New holland tk90 ma tractor service repair manualfujsjfkksekmme
This document appears to be a repair manual for tractor models TK75VA, TK80A, TK80MA, TK90A, TK90MA, and TK100A. It contains sections on general instructions, safety procedures, the engine, clutch, transmissions, rear mechanical drive, braking system, hydraulics, steering, suspension, electrical systems and more. The manual provides information on maintenance, repairs, proper safety practices and component replacement for the specified tractor models.
New holland td5020 tractor service repair manualfujsjfkksekmme
This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems on the tractors. Safety warnings are provided at the beginning noting that only qualified technicians should perform repairs using the proper tools and following the instructions carefully.
New holland td5.95 tractor service repair manualfujsjfkksekmme
This document provides a service manual for tractor models TD5.85, TD5.95, TD5.105, and TD5.115. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform/cab/bodywork. The introduction section notes that all maintenance should be done by authorized workshops and that special equipment may be required. It provides instructions on shimming, installing rotating seals, using O-rings, applying sealers, installing bearings, and fitting roll pins.
New holland w190 c tier 4 wheel loader service repair manualfujsjfkksekmme
The document provides instructions to remove the engine from a W190C Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator cap and draining coolant, loosening hydraulic lines, removing the hood, disconnecting wiring harnesses, and removing intake hoses from the engine. The engine is then ready to be lifted out of the machine.
New holland ts125 a tractor service repair manualfujsjfkksekmme
This document provides sections and page numbers for the repair manual for tractor models TS100A, TS110A, TS115A, TS125A, TS130A, TS135A and T6010, T6020, T6030, T6050, T6070. It lists 15 sections that are included in the repair manual, such as the engine, clutch, transmission, braking system, and electrical system. It also provides some notes for locating repair information for the new T6000 tractor models within the manual.
New holland tl70 a tractor service repair manualfujsjfkksekmme
This document is a service manual for tractor models TL70A through TL100A. It contains sections on general guidelines, the engine, clutch, transmissions, and other systems. Each section provides specifications, views of components, troubleshooting information, and procedures for removal, installation, overhaul, and adjustment of parts.
New holland tk4060 tractor service repair manualfujsjfkksekmme
This service manual provides maintenance and repair instructions for various tractor models including the TK4020F, TK4040, and TK4060. The manual includes sections on the engine, clutch, transmission, rear axle, power take-off, brakes, hydraulics, steering, tracks, electrical systems, and cab/body. The document provides detailed procedures and specifications for removing and servicing components of the tractors.
New holland tk4050 m tractor service repair manualfujsjfkksekmme
This service manual section provides instructions for removing the engine from tractor models TK4020F, TK4020V, TK4030F, TK4030V, TK4030, TK4040M, TK4040, TK4050M, TK4050, and TK4060. The removal process requires first removing the clutch and then draining fluids before detaching various engine components and pipes. Safety precautions are provided, and notes call out differences when removing engines with NEF versus F5A configurations.
New holland tk90 ma tractor service repair manualfujsjfkksekmme
This document appears to be a repair manual for tractor models TK75VA, TK80A, TK80MA, TK90A, TK90MA, and TK100A. It contains sections on general instructions, safety procedures, the engine, clutch, transmissions, rear mechanical drive, braking system, hydraulics, steering, suspension, electrical systems and more. The manual provides information on maintenance, repairs, proper safety practices and component replacement for the specified tractor models.
New holland td5020 tractor service repair manualfujsjfkksekmme
This document is a service manual for TD series tractor models TD5010 through TD5050. It contains sections covering general information, the engine, clutch, gearbox, transmission, brakes, hydraulics, steering, axles, auxiliary equipment, electrical systems, and the cab. Each section provides specifications, diagrams, troubleshooting information, removal and installation instructions, and repair procedures for the various systems on the tractors. Safety warnings are provided at the beginning noting that only qualified technicians should perform repairs using the proper tools and following the instructions carefully.
New holland td5.95 tractor service repair manualfujsjfkksekmme
This document provides a service manual for tractor models TD5.85, TD5.95, TD5.105, and TD5.115. It contains sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform/cab/bodywork. The introduction section notes that all maintenance should be done by authorized workshops and that special equipment may be required. It provides instructions on shimming, installing rotating seals, using O-rings, applying sealers, installing bearings, and fitting roll pins.
New holland t6030 tractor service repair manualfujsjfkksekmme
The document is a service manual that provides technical specifications, diagrams, and repair instructions for the hydraulic, pneumatic, electrical, and electronic systems of tractor models T6010 through T6070. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, electrical power system, electronic systems, and fault codes. The primary hydraulic power system section provides specifications, diagrams, and descriptions of fixed and variable displacement hydraulic pumps and the charge pump.
New holland t4050 deluxe tractor service repair manualfujsjfkksekmme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections for general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical system, platform/cab/bodywork, and technical support. Each section provides specifications, diagrams, removal and installation instructions, disassembly and assembly procedures, adjustments, and other maintenance information.
New holland t9.600 tractor service repair manualfujsjfkksekmme
This document is a service manual that provides information on servicing various systems for tractor models T9.435, T9.480, T9.530, T9.565, T9.600, T9.645, and T9.700, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components. It contains sections on safety, torque specifications, and basic instructions for shop and assembly work. The manual is intended to guide maintenance and repairs on these tractor models.
New holland t9.600 tier 4 b (final) tractor service repair manualfujsjfkksekmme
This document is a service manual for T9 series tractors that provides information on engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, platform, cab, and decals. The manual contains sections covering components, systems, and troubleshooting fault codes. It is intended to aid technicians in servicing and repairing components of the T9 series tractors.
New holland t9.565 tier 4 b (final) tractor service repair manualfujsjfkksekmme
This document contains safety guidelines for operating agricultural tractors and machinery. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Guards and shields should remain in place and areas under raised equipment should be avoided. Proper startup and shutdown procedures are described.
New holland t9.560 [zcf200001 ] tractor service repair manualfujsjfkksekmme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components.
New holland t9.505 [zdf200001 ] tractor service repair manualfujsjfkksekmme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components.
New holland t8.380 powershift transmission (pst) tractor service repair manualfujsjfkksekmme
Plug or cap all ports and lines.
RAIL13TR04235AA 13
14. Remove the two bolts (1) securing the oil cooler
mounting bracket.
RAIL13TR04236AA 14
47794972 10/11/2014
10.1 [10.001] / 6
Engine - Engine and crankcase
15. Disconnect the harness connectors (1) for the fuel
pump and injectors.
RAIL13TR04238AA 15
16. Disconnect the fuel lines (1) from the fuel pump and
injectors. Plug or cap all lines.
RAIL13TR04239AA 16
17. Disconnect the harness connector (
New holland t8.350 tractor service repair manual (pin zfre03123 and above)fujsjfkksekmme
This document is a service manual that provides instructions and specifications for servicing tractor components, including the engine, transmission, axles, hydraulics, electrical systems, and more. It covers tractor models T8.320, T8.350, T8.380, T8.410, and their variations, from PIN ZFRE03123 and above. The manual is divided into sections for each major component and includes diagrams, part numbers, specifications, and repair procedures.
New holland t4.95 tractor service repair manualfujsjfkksekmme
This document is a service manual for T4.85, T4.95, and T4.105 tractors. It contains over 200 sections covering all major systems of the tractors, including the engine, transmission, brakes, hydraulics, steering, electrical systems, and more. Each section provides information and instructions for servicing and repairing the various components. Safety guidelines are also provided at the beginning to help technicians perform repairs safely.
New holland t4.80 v tractor service repair manualfujsjfkksekmme
This document is a service manual that provides technical specifications and repair/maintenance instructions for various tractor models and components, including the engine, clutch, transmission, four-wheel drive system, front axle system, and other parts. It includes identification information, engine details, a table linking product codes to markets and engine types, and an outline of the manual's contents organized by component.
New holland ls170 skid steer loader service repair manual valid from serial n...fujsjfkksekmme
This document provides a table of contents for the repair manual for New Holland LS160 and LS170 skid steer loaders. It lists 10 main sections that are covered in the manual, including the engine, transmission, brakes, hydraulic system, frames, and electrical system. It provides the part number for the complete repair manual and notes that not all sections may apply to each model. The document includes the company and copyright information at the bottom.
Hyster k005 (h4.50 xm europe) forklift service repair manualfujsjfkksekmme
This document provides repair instructions for various components of a forklift, including:
1. The counterweight can be removed using lifting eyebolts and a lifting device, taking precautions about stability and weight.
2. The hood is attached with hinges and gas struts, and the latch needs adjustment to ensure proper operation of safety systems.
3. The overhead guard is attached with bolts and needs to be securely fastened for safe operation; LED backup lights are non-repairable units.
Hyster g004 (s120 ftprs) forklift service repair manualfujsjfkksekmme
This document provides repair procedures for manual and electronic main control valves used in hydraulic lift trucks. It describes:
- There are two main control valve types - manual and electronic. Both are mounted to the cowl.
- The electronic main control valve incorporates an emergency lowering valve and is divided into steering control, lift/lower, tilt, auxiliary, and outlet sections.
- Removal procedures include disconnecting wiring harnesses and hydraulic hoses, removing the steering control unit, and removing O-rings from the main control valve.
Hyster f019 (h10.00 xm 12ec europe) forklift service repair manualfujsjfkksekmme
This document provides repair procedures for a differential assembly. It describes removing the differential carrier from the axle housing and then disassembling the differential carrier. The main steps are:
1. Removing the differential carrier from the axle housing by draining oil, disconnecting drive shafts and brakes, and removing mounting bolts.
2. Removing the ring gear and main differential assembly from the carrier by taking off the bearing caps, adjusting rings, and thrust screw.
3. Removing the drive pinion and pinion carrier by securing the pinion with a bar, removing the mounting nuts and bolts, and lifting it out along with any shims.
The document provides detailed instructions for each
Hyster d138 (n45 fr) forklift service repair manualfujsjfkksekmme
This document provides repair procedures for single and double reach carriages on lift trucks. It describes the components of the reach carriages including the inner and outer frames connected by scissor linkages. Procedures are provided for replacing components like forks, the load backrest extension, and removing and installing the side-shift frame. Detailed steps are outlined for tasks like disassembling and cleaning the side-shift frame components. Safety warnings and cautions are included throughout.
Hyster c187 (s2.00 xl europe) forklift service repair manualfujsjfkksekmme
The document provides repair procedures and descriptions for alternators used in lift trucks. It contains:
- Cautions for working on electrical components to avoid damage.
- Descriptions of alternator parts and how they work to generate current and regulate voltage.
- Steps for removing, disassembling, cleaning, and reassembling Type A alternators, including replacing bearings, brushes, and other parts.
1967 johnson evinrude outboard 18 hp service repair manualfujsjfkksekmme
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Hyster c004 (s60 e) forklift service repair manualfujsjfkksekmme
The document provides descriptions and repair procedures for steering axles on various lift truck models. It describes the components of the steering axle assembly including the axle frame, steering cylinder, spindle assemblies, and pivot or mount. Repair procedures are provided for steering axles with different mount types, including stub shaft mounts and rubber mounts. The procedures cover removal and installation of the steering axle assembly, connecting hydraulic lines, and bleeding air from the steering system. Safety warnings are also provided when putting lift trucks on blocks or stands for maintenance and repair work.
1967 johnson evinrude outboard 15 hp service repair manualfujsjfkksekmme
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
New holland t6030 tractor service repair manualfujsjfkksekmme
The document is a service manual that provides technical specifications, diagrams, and repair instructions for the hydraulic, pneumatic, electrical, and electronic systems of tractor models T6010 through T6070. It includes sections on the primary and secondary hydraulic power systems, hydraulic command system, electrical power system, electronic systems, and fault codes. The primary hydraulic power system section provides specifications, diagrams, and descriptions of fixed and variable displacement hydraulic pumps and the charge pump.
New holland t4050 deluxe tractor service repair manualfujsjfkksekmme
This document is a service manual for T4020, T4030, T4040, and T4050 tractor models. It contains sections for general guidelines, the engine, clutch, transmissions, drive lines, front and rear mechanical transmissions, power take-off, brakes, hydraulic systems, steering, axle and wheels, cab air conditioning, electrical system, platform/cab/bodywork, and technical support. Each section provides specifications, diagrams, removal and installation instructions, disassembly and assembly procedures, adjustments, and other maintenance information.
New holland t9.600 tractor service repair manualfujsjfkksekmme
This document is a service manual that provides information on servicing various systems for tractor models T9.435, T9.480, T9.530, T9.565, T9.600, T9.645, and T9.700, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components. It contains sections on safety, torque specifications, and basic instructions for shop and assembly work. The manual is intended to guide maintenance and repairs on these tractor models.
New holland t9.600 tier 4 b (final) tractor service repair manualfujsjfkksekmme
This document is a service manual for T9 series tractors that provides information on engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, platform, cab, and decals. The manual contains sections covering components, systems, and troubleshooting fault codes. It is intended to aid technicians in servicing and repairing components of the T9 series tractors.
New holland t9.565 tier 4 b (final) tractor service repair manualfujsjfkksekmme
This document contains safety guidelines for operating agricultural tractors and machinery. It outlines general safety rules regarding slopes, passengers, impaired operation, hitching implements, overhead hazards, and more. Personal protective equipment is recommended. Guards and shields should remain in place and areas under raised equipment should be avoided. Proper startup and shutdown procedures are described.
New holland t9.560 [zcf200001 ] tractor service repair manualfujsjfkksekmme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components.
New holland t9.505 [zdf200001 ] tractor service repair manualfujsjfkksekmme
This document is a service manual for CNH America LLC tractor models T9.390, T9.450, T9.505, T9.560, T9.615, and T9.670 from PIN ZCF200001 and above and PIN ZDF200001 and above. The manual contains safety rules, instructions for servicing and assembly, product identification information, torque specifications, and sections covering the engine, transmission, axles, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components.
New holland t8.380 powershift transmission (pst) tractor service repair manualfujsjfkksekmme
Plug or cap all ports and lines.
RAIL13TR04235AA 13
14. Remove the two bolts (1) securing the oil cooler
mounting bracket.
RAIL13TR04236AA 14
47794972 10/11/2014
10.1 [10.001] / 6
Engine - Engine and crankcase
15. Disconnect the harness connectors (1) for the fuel
pump and injectors.
RAIL13TR04238AA 15
16. Disconnect the fuel lines (1) from the fuel pump and
injectors. Plug or cap all lines.
RAIL13TR04239AA 16
17. Disconnect the harness connector (
New holland t8.350 tractor service repair manual (pin zfre03123 and above)fujsjfkksekmme
This document is a service manual that provides instructions and specifications for servicing tractor components, including the engine, transmission, axles, hydraulics, electrical systems, and more. It covers tractor models T8.320, T8.350, T8.380, T8.410, and their variations, from PIN ZFRE03123 and above. The manual is divided into sections for each major component and includes diagrams, part numbers, specifications, and repair procedures.
New holland t4.95 tractor service repair manualfujsjfkksekmme
This document is a service manual for T4.85, T4.95, and T4.105 tractors. It contains over 200 sections covering all major systems of the tractors, including the engine, transmission, brakes, hydraulics, steering, electrical systems, and more. Each section provides information and instructions for servicing and repairing the various components. Safety guidelines are also provided at the beginning to help technicians perform repairs safely.
New holland t4.80 v tractor service repair manualfujsjfkksekmme
This document is a service manual that provides technical specifications and repair/maintenance instructions for various tractor models and components, including the engine, clutch, transmission, four-wheel drive system, front axle system, and other parts. It includes identification information, engine details, a table linking product codes to markets and engine types, and an outline of the manual's contents organized by component.
New holland ls170 skid steer loader service repair manual valid from serial n...fujsjfkksekmme
This document provides a table of contents for the repair manual for New Holland LS160 and LS170 skid steer loaders. It lists 10 main sections that are covered in the manual, including the engine, transmission, brakes, hydraulic system, frames, and electrical system. It provides the part number for the complete repair manual and notes that not all sections may apply to each model. The document includes the company and copyright information at the bottom.
Hyster k005 (h4.50 xm europe) forklift service repair manualfujsjfkksekmme
This document provides repair instructions for various components of a forklift, including:
1. The counterweight can be removed using lifting eyebolts and a lifting device, taking precautions about stability and weight.
2. The hood is attached with hinges and gas struts, and the latch needs adjustment to ensure proper operation of safety systems.
3. The overhead guard is attached with bolts and needs to be securely fastened for safe operation; LED backup lights are non-repairable units.
Hyster g004 (s120 ftprs) forklift service repair manualfujsjfkksekmme
This document provides repair procedures for manual and electronic main control valves used in hydraulic lift trucks. It describes:
- There are two main control valve types - manual and electronic. Both are mounted to the cowl.
- The electronic main control valve incorporates an emergency lowering valve and is divided into steering control, lift/lower, tilt, auxiliary, and outlet sections.
- Removal procedures include disconnecting wiring harnesses and hydraulic hoses, removing the steering control unit, and removing O-rings from the main control valve.
Hyster f019 (h10.00 xm 12ec europe) forklift service repair manualfujsjfkksekmme
This document provides repair procedures for a differential assembly. It describes removing the differential carrier from the axle housing and then disassembling the differential carrier. The main steps are:
1. Removing the differential carrier from the axle housing by draining oil, disconnecting drive shafts and brakes, and removing mounting bolts.
2. Removing the ring gear and main differential assembly from the carrier by taking off the bearing caps, adjusting rings, and thrust screw.
3. Removing the drive pinion and pinion carrier by securing the pinion with a bar, removing the mounting nuts and bolts, and lifting it out along with any shims.
The document provides detailed instructions for each
Hyster d138 (n45 fr) forklift service repair manualfujsjfkksekmme
This document provides repair procedures for single and double reach carriages on lift trucks. It describes the components of the reach carriages including the inner and outer frames connected by scissor linkages. Procedures are provided for replacing components like forks, the load backrest extension, and removing and installing the side-shift frame. Detailed steps are outlined for tasks like disassembling and cleaning the side-shift frame components. Safety warnings and cautions are included throughout.
Hyster c187 (s2.00 xl europe) forklift service repair manualfujsjfkksekmme
The document provides repair procedures and descriptions for alternators used in lift trucks. It contains:
- Cautions for working on electrical components to avoid damage.
- Descriptions of alternator parts and how they work to generate current and regulate voltage.
- Steps for removing, disassembling, cleaning, and reassembling Type A alternators, including replacing bearings, brushes, and other parts.
1967 johnson evinrude outboard 18 hp service repair manualfujsjfkksekmme
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Hyster c004 (s60 e) forklift service repair manualfujsjfkksekmme
The document provides descriptions and repair procedures for steering axles on various lift truck models. It describes the components of the steering axle assembly including the axle frame, steering cylinder, spindle assemblies, and pivot or mount. Repair procedures are provided for steering axles with different mount types, including stub shaft mounts and rubber mounts. The procedures cover removal and installation of the steering axle assembly, connecting hydraulic lines, and bleeding air from the steering system. Safety warnings are also provided when putting lift trucks on blocks or stands for maintenance and repair work.
1967 johnson evinrude outboard 15 hp service repair manualfujsjfkksekmme
This document provides specifications for starter rope diameter and length for various engine sizes and model years of outboard motors. It lists the engine size in horsepower, model year, rope diameter in inches, and rope length range in inches. For example, it lists that for a 1.5 hp engine from 1968-1970 the starter rope diameter is 3/82712 inches. It provides this data in a table format for various engine sizes from 1.5 hp to 40 hp made between 1956-1970.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
11. SECTION 00 -- GENERAL -- CHAPTER 1 1
87666787A -- 11 -- 2007
GENERAL INSTRUCTIONS
IMPORTANT NOTICE
All maintenance and repair work described in this manual must be performed exclusively by NEW HOLLAND
service technicians, in strict accordance with the instructions given and using any specific tools necessary.
Anyone performing the operations described herein without strictly following the instructions is personally
responsible for any eventual injury or damage to property.
BATTERY
Before carrying out any kind of service operation disconnect and isolate the battery negative lead, unless
otherwise requested for specific operations (e.g.: operations that require the engine running). Once the specific
operation has been completed, disconnect the lead in order to complete the operation.
SHIMMING
For each adjustment operation, select adjusting shims and measure individually using a micrometer, then add
up the recorder values: Do not rely on measuring the entire shimming set, which may be incorrect, or the rated
value indicated for each on shim.
ROTATING SHAFT SEALS
For correct rotating shaft seal installation, proceed as follows:
-- before assembly, allow the seal to soak in the oil it will be sealing for at least thirty minutes;
-- thoroughly clean the shaft and check that the working surface on the shaft is not damaged;
-- position the sealing lip facing the fluid; with hydrodynamic lips, take into consideration the shaft rotation
direction and position the grooves so that they will deviate the fluid towards the inner side of the seal;
-- smear the sealing lip with a thin layer of lubricant (use oil rather than grease) and fill the gap between the
sealing lip and the dust lip on double lip seals with grease;
-- insert the seal in its seat and press down using a flat punch; do not tap the seal with a hammer or mallet;
-- whilst inserting the seal, check that the it is perpendicular to the seat; once settled, make sure that it makes
contact with the thrust element, if required;
-- to prevent damaging the seal lip on the shaft, position a protective guard during installation operations.
O--RING SEALS
Lubricate the O--RING seals before inserting them in the seats, this will prevent them from overturning and
twisting, which would jeopardise sealing efficiency.
SEALING COMPOUNDS
Apply one of the following sealing compounds on the mating surfaces marked with an X: RTV SILMATE,
RHODORSIL CAF 1 or LOCTITE PLASTIC GASKET.
Before applying the sealing compound, prepare the surfaces as follows:
-- remove any incrustations using a wire brush;
-- thoroughly de--grease the surfaces using one of the following cleaning agents: trichlorethylene, petrol or a
water and soda solution.
BEARINGS
When installing bearings it is advised to:
-- heat the bearings to 80 ÷ 90 0C before fitting on the shafts;
-- allow the bearings to cool before installing them from the outside.
12. 2 SECTION 00 -- GENERAL -- CHAPTER 1
87666787A -- 11 -- 2007
SPRING PINS
When fitting split socket elastic pins, ensure that the pin notch is positioned in the direction of the force required
to stress the pin.
Spiral spring pins do not require special positioning
SPARE PARTS
Use genuine parts only.
Only genuine spare parts guarantee the same quality, duration and safety as they are the same parts that are
assembled during production.
Only genuine parts can offer this guarantee.
When ordering spare parts, always provide the following information:
-- tractor model (commercial name) and frame number;
-- engine type and number;
-- part number of the ordered part, which can be found in the ”Microfiches” or the ”Spare Parts Catalogue”, used
for order processing.
NOTES FOR EQUIPMENT
The tools that NEW HOLLAND propose and illustrate in this manual are:
-- specifically researched and designed for use with NEW HOLLAND vehicles;
-- necessary to make reliable repair;
-- accurately built and strictly tested to offer efficient and long--lasting working means.
By using these tools, repair personnel will benefit from:
-- operating in optimal technical conditions;
-- obtaining the best results;
-- saving time and effort;
-- working in safe conditions.
IMPORTANT NOTES
Wear limit values indicated for certain parts are recommended, but not binding. The terms ”front”, ”rear”,
”right--hand” and ”left--hand” (when referred to different parts) are intended as seen from the driving position with
the tractor in the normal direction of movement.
MOVING THE TRACTOR WITH THE BATTERY REMOVED
External power supply cables should only be connected to the respective positive and negative cable terminals,
using efficient clamps that guarantee adequate and secure contact.
Disconnect all services (lights, windshield wipers, etc.) before starting the vehicle.
If the vehicle electrical system requires checking, carry out operations with the power supply connected; once
checking is completed, disconnect all services and switch off the power supply before disconnecting the cables.
13. SECTION 00 -- GENERAL -- CHAPTER 1 3
87666787A -- 11 -- 2007
SAFETY REGULATIONS
WARNING AND DANGER SYMBOL
This warning symbol points out important messages
concerning your safety.
Carefully read the following safety regulations and
observe advised precautions in order to avoid
potential hazards and safeguard your health and
safety.
In this manual the symbol is accompanied by the
following key--words:
WARNING -- Warnings concerning unsuitable repair
operations that may jeopardise the safety of Repair
personnel.
DANGER -- Specific warnings concerning potential
hazards for operator safety or for other persons
directly or indirectly involved.
TO PREVENT ACCIDENTS
Most accidents or injuries that occur in workshops
are the result of non--observance of simple and
fundamental safety regulations. For this reason, IN
MOST CASES THESE ACCIDENTS CAN BE
AVOIDED: by foreseeing possible causes and
consequently acting with the necessary caution and
care.
Accidents may occur with all types of vehicle,
regardless of how well it was designed and built.
A careful and judicious service technician is the best
guarantee against accidents.
Precise observance of the most basic safety rule is
normally sufficient to avoid many serious accidents.
DANGER. Never carry out any cleaning, lubrication
or maintenance operations when the engine is
running.
SAFETY REGULATIONS
GENERAL
-- Carefully follow specified repair and
maintenance procedures.
-- Do not wear rings, wristwatches, jewellery,
unbuttoned or loose articles of clothing such as:
ties, torn clothing, scarves, open jackets or shirts
with open zips that may remain entangled in
moving parts. It is advised to wear approved
safety clothing, e.g.: non--slip footwear, gloves,
safety goggles, helmets, etc.
1
-- Do not carry out repair operations with someone
sitting in the driver’s seat, unless the person is a
trained technician who is assisting with the
operation in question.
-- Do not operate the vehicle or use any of the
implements from different positions, other than
the driver’s seat.
-- Do not carry out operations on the vehicle with
the engine running, unless specifically indicated.
-- Stop the engine and ensure that all pressure is
relieved from hydraulic circuits before removing
caps, covers, valves, etc.
-- All repair and maintenance operations must be
carried out using extreme care and attention.
-- Service steps and platforms used in a workshop
or in the field should be built in compliance with
the safety rules in force.
-- Disconnect the batteries and label all controls to
indicate that the vehicle is being serviced. Block
the machine and all equipment which should be
raised.
-- Do not check or fill fuel tanks, accumulator
batteries, nor use starting liquid when smoking or
near naked flames, as these fluids are
inflammable.
-- Brakes are inoperative when manually released
for repair or maintenance purposes: Use blocks
or similar devices to control the machine in these
conditions.
-- The fuel nozzle should always be in contact with
the filling aperture: Maintain this contact until the
fuel stops flowing into the tank to avoid possible
sparks due to static electricity build--up.
16. 22 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
Op. 10 001 10
ENGINE Removal--Installation
DANGER
Lift and handle all heavy parts using suitable lifting
equipment.
Make sure that assemblies or parts are supported by
means of suitable slings and hooks. Ensure that
no--one is in the vicinity of the load to be lifted.
ATTENTION
Use suitable tools to align the holes. NEVER USE
FINGERS OR HANDS.
1. Remove the bonnet as described in operation
90 100 22.
2. Extract the fixing pin and remove the ballast (1);
unscrew the retaining screws and retrieve the
ballast support (2).
6
3. If the tractor is a T4040 Supersteer or T4050
Supersteer model, position and secure the
bracket 380001613 (1) together with the spacers
50162 (4) on the front axle (3) and associated
support (2).
7
4. Unscrew the retaining bolts and remove the side
grille (1).
Perform this operation on the other side of the
tractor too.
8
17. SECTION 10 -- ENGINE -- CHAPTER 1 23
87666787A -- 11 -- 2007
5. Unscrew the related retaining bolt and loosen the
guide (1), unhook the catch and take out the
condenser (2).
9
6. Disconnect the electrical connection from the
compressor (1) and unscrew the related
retaining bolts.
Remove the brackets fixing the pipes of the air
conditioning system and take the condenser,
compressor and pipes under the transmission
without disconnecting the pipes.
10
7. Unscrew the bolts (3) securing the exhaust pipe
(1), unscrew the exhaust silencer retaining bolts
(2) and remove the entire assembly.
Unscrew the retaining bolts and remove the heat
shield.
11
8. Remove the guard (1) and disconnect the cables
from the starter motor (2).
12
18. 24 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
9. Disconnect the pipes (1) of the cab heating
system and drain the engine cooling system.
13
10. Unscrew the plug and drain the oil from the rear
transmission casing (the prescribed quantity is
42 litres).
25628
14
11. Disconnect the power steering pipes (2),
unscrew the related retaining bolts and remove
the bracket (1).
15
12. Disconnect the electrical connection from the
brake fluid reservoir (1), unscrew the retaining
bolts and remove the reservoir from the
supporting bracket.
16
19. SECTION 10 -- ENGINE -- CHAPTER 1 25
87666787A -- 11 -- 2007
13. Unscrew the retaining bolts and remove the
bonnet bracket (1).
17
14. Disconnect: the main electrical connections (1),
the connection of the steering sensor and thecab
ground, disconnect the throttle cable (2) from the
injection pump.
18
15. Disconnect the diesel pipes (1) from the injection
pump.
Disconnect the pipe (2) from the pump.
19
16. Disconnect: the transmission oil cooler pipes (1)
and the front axle differential lock pipe (2).
20
20. 26 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
17. If the tractor is a T4040 Supersteer or T4050
Supersteer model, unscrew the front and rear
retaining bolts, unscrew the front pivot pin
retaining screw and remove the bracket (1).
Unscrew the relative retaining bolts and remove
the rear guard.
21
18. If the tractor is a T4040 Deluxe or T4050 Deluxe
model, unscrew the front, central and rear
retaining bolts and remove the guard on the
propeller shafts (1).
27801
22
19. Remove the circlip (2) and move the front sleeve
(1) backwards in order to free it from the groove
on the front axle.
25647
1 2
23
20. Remove the circlip (2) and move the rear sleeve
(1) in order to release it from the groove on the
drive.
1 2
25646
24
21. SECTION 10 -- ENGINE -- CHAPTER 1 27
87666787A -- 11 -- 2007
21. Remove the propeller shaft central support (1)
retaining bolts and extract the shaft together with
the support.
25648
1
25
22. Loosen the retaining bolt and turn the bracket (1)
through 90°.
26
23. For models fitted with brakes on the front axle it
is necessary to drain the brake fluid tank and
disconnect the pipes (1, 2 and 3) from the block.
27
24. Unscrew: the retaining bolts of the pipe (1)
delivering oil to the pump and the bolts retaining
the pipe (2) to the filter support.
28
22. 28 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
25. Loosen the related clamps and remove the
sleeve (2) from the pipe (1) and remove the
transmission oil inlet pipe together with the
above--mentioned sleeve.
29
26. Unscrew the retaining bolts and remove the
guard (1). Do this on both sides.
30
27. Unscrew the retaining bolts and remove the cab
mat guard (2).
Remove the plastic pedal (1).
31
28. Unscrew the bolts (1) (on both sides), extract the
spring pin (2) and remove the throttle pedal (3).
32
23. SECTION 10 -- ENGINE -- CHAPTER 1 29
87666787A -- 11 -- 2007
29. Raise the front part of the cab mat; remove the
two plastic plugs and, through the hole (1),
unscrew the four upper bolts securing the engine
to the clutch casing.
33
30. Place a stand under the clutch casing, attach the
rear portion of the engine to a hoist, using chains
(1).
34
31. Unscrew the remaining bolts (1) securing the
engine to the clutch casing and separate the
engine with the front axle from the clutch casing.
35
32. Disconnect the connections (1) from the clogged
air filter sensor.
36
24. 30 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
33. Place a stand under the rear portion of the bevel
drive casing (T4040 Supersteer or T4050
Supersteer) or two stands: one under the axle
support at the rear and the other under the front
side. (models with standard front axle).
Keeping the chains (1, fig. 34) connected, join
one chain (5) to the front of the engine.
Unscrew the clamps and remove: the engine oil
vapour recirculation pipe (3), turbocharger intake
pipe (2), and the intake air cooler pipes (1 and 4).
37
34. Disconnect the lower (1) and upper sleeves from
the radiator, remove the bracket (2) fastening the
power steering pipe.
38
35. For the T4040 Deluxe or T4050 Deluxe models,
insert a wooden wedge on each side betweenthe
axle support and the axle itself.
For all models, unscrew the bolts (1) on both
sides and separate the engine from the
axle--support assembly with the radiator and
battery.
36. Rest the engine on an adequate support.
37. To re--fit the engine, proceed as follows.
ATTENTION
Use suitable tools to align the holes. NEVER USE
FINGERS OR HANDS.
-- Apply the torque settings listed on page 12.
-- Connect the engine, with chains, to the hoist.
39
25. SECTION 10 -- ENGINE -- CHAPTER 1 31
87666787A -- 11 -- 2007
-- Refit the engine to the axle--support assembly
with the radiator, battery, coolers: intake air and
transmission oil.
-- Connect the upper and lower sleeves of the
radiator to the engine.
-- Secure the power steering pipes.
-- Before refitting the engine to the clutch box
carefully clean the mating surfaces and apply
sealing compound (2 mm diameter), according
to the diagram shown Section 21, Chapter 1,
page 30.
-- Position the engine on the clutch casing and
secure it with the specific bolts.
-- Fit the plastic plugs on the cab floor.
-- Move the cab mat into the right position and
secure it with the two bolts on the upright (do this
on both sides).
-- Fit the throttle pedal with the plastic part.
-- Position and secure the guard of the cab mat (do
this on both sides).
-- Fit the two lower guards of the control panel (do
this on both sides).
-- Position, connect and secure the oil delivery pipe
to the lift.
-- Position, connect and secure the lift control
pump oil inlet pipe.
-- For models fitted with brakes on the front axle it
is necessary to connect the pipes to the related
block.
-- Position and secure the bracket between the
clutch housing and engine.
-- Position the propeller shaft, secure the central
support, slide the two front and rear sleeves and
secure them with the circlips.
-- If the tractor is a T4040 Deluxe or T4050 Deluxe
model, position the propeller shaft guard and
secure it.
-- If the tractor is a T4040 Supersteer or T4050
Supersteer model, position the propeller shaft
rear guard and secure it.
-- If the tractor is a T4040 Supersteer or T4050
Supersteer model, position the propeller shaft
front guard and secure it.
-- If the tractor is a T4040 Supersteer or T4050
Supersteer model, unscrew the retaining bolts
and remove the bracket 380001613 with the
spacers 50612.
-- Connect the differential lock control pipe.
-- Connect the pipes to the transmission oil cooler
pipes.
-- Connect the fuel supply and return lines to the
injection pump.
-- Connect the delivery pipe to the power steering
pump.
-- Connect all the electrical connections between
the cab and engine.
-- Position and secure the ground cable between
the cab and engine.
-- Position and secure the throttle control rod.
-- Position the upper engine bracket with the heat
guard and secure it.
-- Connect the front pipes to the rear pipes
delivering coolant to the cab heater.
-- Position and secure the brake fluid tank and
connect the electrical connection to the
above--mentioned part.
-- Connect the steering control pipes.
-- Connect the electric cable to the starter motor
and fit the relevant protection.
-- Position and secure the heat shield, exhaust
silencer to the engine and to the cab.
-- Position and secure: the compressor, condenser
and related pipes.
-- Connect the electrical connection to the
compressor.
-- Position and secure the side grille (do this on
both sides).
-- Secure: the radiator fixing bracket, engine oil
vapour recirculation pipe, inlet pipe and intake air
cooler pipes.
-- Connect the clogged air filter sensor pressure
switch and steering sensor connections.
-- For models fitted with brakes on the front axle it
is necessary to fill the relevant tank (see sect. 00,
page 6 for the prescribed product and quantity)
and bleed the braking system (see sect. 33).
26. 32 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
-- Screw the plug on the rear transmission casing
and fill up with oil (see sect. 00, page 6 for the
prescribed product and quantity).
-- Fill up the engine cooling system (see sect. 00,
page 6 for the prescribed product and quantity).
-- Position and secure the ballast support.
-- Position and secure the ballast.
-- Install the bonnet as described in operation
90 100 22.
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. SECTION 10 -- ENGINE -- CHAPTER 1 33
87666787A -- 11 -- 2007
Op. 10 001 54
ENGINE Disassembly -- Assembly
The figures refer to the F4CE9484M*J601 versions
of 71 kW (97 hp) mod. T4050. The revision is to
highlight and describe the specific parts of the
versions F4CE9484N*J601 of 63 kW (86 hp) mod.
T4040 and their respective variants.
ATTENTION
Handle all parts carefully. Do not put your hands or
fingers between parts. Wear the prescribed safety
clothing, including goggles, gloves and safety
footwear.
1. Remove the engine as described in operation
10 001 10, proceed as follows.
2. Drain off the engine oil by removing the plug from
the sump and the oil filler plug.
3. Detach the fan unit from the fan pulley.
4. To be able to fit the bracket 380000661 (for fixing
the engine to the overhaul stand) to the
crankcase, it is necessary to remove the wiring
(1) from the left--hand side of the engine.
MIF1103A
40
5. To be able to fit the bracket 380000661 to the
crankcase on the right--hand side, remove the
starter motor (5), oil filter (3), clamp (4), and
turbine oil return pipe (1).
6. Fix the gearbox to the rotating stand 380000301.
Detach the oil delivery pipe (2).
MIF1104A
41
29. 34 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
7. Remove the intake manifold (2).
8. Disconnect the engine oil vapour recovery pipe
from the blow--by (3).
9. Remove the tappet covers (1).
10. Remove the pipes with the quick--fit coupling (6)
and (8).
11. Remove the piping from the LDA system (5).
12. Remove the fuel filter (7).
13. Remove the heater (4).
14. Remove the control unit for the heater (10).
15. Remove the fuel filter support (9).
MIF1105A
42
16. Remove the injector feed pipe (4) from the
injection pump (3).
17. Remove the brackets on the cylinder head of the
pipe assembly (1), (2) and (6).
18. Replace fuel supply pump (5).
MIF1107A
43
19. Detach the fuel pipe assembly (1) from the
injectors.
20. Remove the fuel outlet pipe (2) from the injectors
removing the screw (3) and the seal (4).
MIF1108A
44
30. SECTION 10 -- ENGINE -- CHAPTER 1 35
87666787A -- 11 -- 2007
21. Remove the screws (2) and the turbine (1).
22. Remove the exhaust manifold (3).
23. Remove the belt (3, fig. 46) of the auxiliary
members by loosening the tightener.
MIF1109A
45
24. Remove the alternator (6), fan pulley (2) and the
tightener (8). Remove the support (1) of the
pulley (2) and the oil cooler (7).
25. Remove the coolant pump (5).
26. Remove the engine cooling system fitting (4)
from the crankcase.
NOTE: The coolant pump (5) cannot be overhauled.
It must be replaced if there is any irregular operation.
MIF1110A
46
27. Lock the flywheel to stop it turning, remove the
fixing screws (1) from the pulley (2).
MIF1111A
47
Removing the crankshaft front seal
(Op. 28. ÷ 32.)
28. Apply tool 380000665 (4) on the front tang (2) of
the crankshaft.
29. Perforate the inner seal (1) with a drill bit
(∅∅∅∅ 3.5 mm) through the guide holes of the tool
380000665 (4), for a depth of 5 mm.
30. Secure the tool 380000665 (4) to the seal (1) with
the screws (3) provided.
31. Extract the seal (1) by screwing down the screw
(5).
MIF0916A
48
31. 36 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
32. Fit the tie rod (3) of the tool 380000669 to the
outer seal (1) as shown in the figure 49 and with
the lever (4), extract it from the front cover (2).
MIF0917A
49
33. Turn the engine over, take out the screws (2) and
remove the oil sump (1).
MIF1117A
50
34. Take out the screws (2) and remove the oil pump
(1).
NOTE: The oil pump (1) cannot be overhauled.
It must be replaced if there is any irregular operation.
MIF1112A
51
35. Using the pin (1), lock the additional
counterweights (2) at the T.D.C.
Unscrew the retaining bolts (3) and remove the
additional counterweights (2).
MIF1113A
52
32. SECTION 10 -- ENGINE -- CHAPTER 1 37
87666787A -- 11 -- 2007
36. Before removing the injection pump, do the
timing and lock the engine flywheel with cylinder
no.1 at T.D.C. as indicated on page 8, using
tools 380000988 and 380000732. Then loosen
the bolt (2), remove the “ L” spacer (1) and lock
the screw (2) in order to keep the pump in time
with the engine flywheel.
NOTE: Keep the ”L” spacer with the pump casing.
MIF0920A
53
37. Remove the three nuts (2) (3) (5) securing the
injection pump (1) to the crankcase (4) and
extract it from its housing.
MIF0922A
54
38. Remove the screws (2) fixing the engine flywheel
(1) to the crankshaft.
MIF1115A
55
39. Screw two pins (2) of the appropriate length into
the holes in the crankshaft (3).
40. Extract the engine flywheel (1) so it can be slung
with the lift and put it away in a specific container.
MIF1116A
56
33. 38 SECTION 10 -- ENGINE -- CHAPTER 1
87666787A -- 11 -- 2007
Removing the crankshaft rear seal
(Op. 41.÷ 44.)
41. Extract the seal, fitting the tool 380000663 (3) on
the rear shank (1) of the crankshaft.
42. Perforate the inner seal (5) with a drill bit
(∅∅∅∅ 3.5 mm) through the guide holes of the tool
380000663 (3), for a depth of 5 mm.
43. Secure the tool 380000663 (3) to the seal (5) by
screwing down the screws (2) supplied.
44. Extract the seal (5) by screwing down the screw
(4).
MIF0927A
57
45. Take out the screws (2) and remove the timing
gear box (1), retrieving the injection pump gear.
NOTE: Note down the assembly position of the
screws (2) as they have different sizes.
MIF1125A
58
46. Take out the screws (1) and remove the gears (3)
and (4) from the camshaft (2).
MIF1118A
59
47. Take out the bolts (1) and remove the hydraulic
pump drive gear (2).
MIF1119A
60
34. SECTION 10 -- ENGINE -- CHAPTER 1 39
87666787A -- 11 -- 2007
48. For each cylinder, remove the rocker arm
assembly (1) loosen the adjuster nuts (3),
unscrew the adjusters (4) and take out the
screws (2).
MIF0933A
61
49. Extract the injectors (2) with tool 380000671 (1).
MIF0934A
62
50. Take out the screws (1) fixing the head to the
crankcase.
MIF1120A
1
63
51. After fitting the brackets (1) and (2) hook the
metal cables and detach the cylinder head from
the crankcase with the hoist.
NOTE: After removing the cylinder head, remove the
brackets (1) and (2).
MIF1121A
64