The document is a service manual that provides maintenance and repair instructions for an excavator engine. It includes detailed component identification diagrams and lists torque specifications for removing and installing engine parts. The manual covers the engine, hydraulic systems, frames and ballasting, tracks and suspension, cab climate control, electrical systems, lubrication, booms, buckets, and the cab/body. Technicians should carefully follow the step-by-step instructions and safety warnings when servicing components.
Case 1021 g tier 2 wheel loader service repair manualuudjjkkskmme
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1021 g tier 2 wheel loader service repair manualfujsjefkskekem
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/cab/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1121 g tier 2 wheel loader service repair manualfujsjefjkskefksem
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1121 g tier 2 wheel loader service repair manualudfjjjdkksmmd
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1021 g tier 2 wheel loader service repair manualfjskkksmemm
Disconnect the battery ground cable.
8. Disconnect the negative (-) battery cable from the bat-
tery.
9. Drain the engine oil and coolant.
10. Disconnect all hoses and wiring from the engine.
11. Remove the engine hood.
12. Remove the engine mounting bolts and carefully lower
the engine from the machine.
13. Remove the engine from the work area.
Post operation:
Engine hood - Install (90.105)
Engine - Install
Prior operation:
Engine - Remove (10.001)
1. Carefully lift the engine into position on the machine.
2. Install the engine
Case 1121 g tier 2 wheel loader service repair manualfjsekksmemm
This document provides service information for removing the engine on 1021G and 1121G wheel loaders. Key steps include:
- Parking the machine and lowering the bucket to the ground
- Releasing pressure from the hydraulic, brake, and ride control systems
- Slowly loosening caps and covers to release air pressure before removal
Proper preparation is required to safely remove the engine and avoid injury from pressurized systems.
Case 921 g tier 2 wheel loader service repair manualuudjjjkskkmem
This document provides instructions for removing the engine from an 821G or 921G wheel loader. The steps include parking the machine safely, draining fluids like coolant and oil, and removing panels to access the engine. Safety precautions and proper drain container placement are emphasized. Key components mentioned are the engine, radiator, oil sump, drain plugs, and access panels.
Case 1021 g tier 2 wheel loader service repair manualuudjjkkskmme
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1021 g tier 2 wheel loader service repair manualfujsjefkskekem
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/cab/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1121 g tier 2 wheel loader service repair manualfujsjefjkskefksem
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1121 g tier 2 wheel loader service repair manualudfjjjdkksmmd
This 3-page service manual provides maintenance instructions for CNH Industrial Italia S.p.A. wheel loaders models 1021G and 1121G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform/bodywork, and safety procedures. Technicians are instructed to follow all safety precautions and only perform authorized repairs after stopping the engine and relieving hydraulic pressure.
Case 1021 g tier 2 wheel loader service repair manualfjskkksmemm
Disconnect the battery ground cable.
8. Disconnect the negative (-) battery cable from the bat-
tery.
9. Drain the engine oil and coolant.
10. Disconnect all hoses and wiring from the engine.
11. Remove the engine hood.
12. Remove the engine mounting bolts and carefully lower
the engine from the machine.
13. Remove the engine from the work area.
Post operation:
Engine hood - Install (90.105)
Engine - Install
Prior operation:
Engine - Remove (10.001)
1. Carefully lift the engine into position on the machine.
2. Install the engine
Case 1121 g tier 2 wheel loader service repair manualfjsekksmemm
This document provides service information for removing the engine on 1021G and 1121G wheel loaders. Key steps include:
- Parking the machine and lowering the bucket to the ground
- Releasing pressure from the hydraulic, brake, and ride control systems
- Slowly loosening caps and covers to release air pressure before removal
Proper preparation is required to safely remove the engine and avoid injury from pressurized systems.
Case 921 g tier 2 wheel loader service repair manualuudjjjkskkmem
This document provides instructions for removing the engine from an 821G or 921G wheel loader. The steps include parking the machine safely, draining fluids like coolant and oil, and removing panels to access the engine. Safety precautions and proper drain container placement are emphasized. Key components mentioned are the engine, radiator, oil sump, drain plugs, and access panels.
Case 921 g tier 2 wheel loader service repair manualujdjjjkskmme
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g tier 2 wheel loader service repair manualudjfjjskkmdme
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 921 g tier 2 wheel loader service repair manualfujsjefjksekfsmem
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 921 g tier 2 wheel loader service repair manualfisejfjsekfksem
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g tier 2 wheel loader service repair manualfijsfjskekmme
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g tier 2 wheel loader service repair manualpfiskdmjekm
The document provides instructions for removing the engine from a wheel loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, draining coolant and engine oil, and removing panels to access the engine. Proper drainage and safety procedures are emphasized throughout.
Case 921 g tier 2 wheel loader service repair manualfksjksmmde
The document provides instructions for removing the engine from a wheel loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, draining coolant and engine oil, and removing panels to access the engine. Safety precautions and proper drain container placement are noted.
New holland w300 d tier 2 wheel loader service repair manualfujsejfksekkme
This document is a service manual for CNH Industrial Italia S.p.A. wheel loaders models W270D and W300D Tier 2. It contains safety information and detailed maintenance and repair instructions organized by system (e.g. engine, transmission, hydraulics). Technicians are instructed to follow all safety precautions and only perform repairs if authorized and with the engine stopped and hydraulic pressure relieved.
New holland w300 d tier 2 wheel loader service repair manualfusjejkdkmse
- The document provides instructions to remove an engine from a wheel loader. It is a 19 step process that includes draining fluids, disconnecting hoses, cables and brackets, and using lifting equipment to remove the engine as an assembly with the exhaust stack and precleaner. Proper safety procedures like relieving pressures in hydraulic and other systems are described.
Case 1121 f stage iv wheel loader service repair manualfhjsekfksemert
This document provides instructions for removing an engine from a wheel loader. It outlines 16 steps, including draining fluids, disconnecting battery cables, removing covers and hoses. Proper safety procedures are emphasized, such as relieving hydraulic pressure before working on the machine.
Case 1121 f stage iv wheel loader service repair manualfhjsekfksemert
This document is a service manual for wheel loaders models 1021F and 1121F. It contains introduction information and safety rules for working on the equipment. The manual is divided into sections covering the engine, transmission, axle systems, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, and other parts. It provides maintenance instructions and component level details for repairing and servicing the wheel loaders. Personal safety is emphasized, with warnings to stop the engine and relieve pressure before working on systems.
Case 1021 f stage iv wheel loader service repair manualfjkskmmdmme
This document provides instructions for removing an engine from a wheel loader. It outlines 16 steps to drain fluids, release pressures, disconnect electrical and hydraulic components, and detach hoses and mounts. Proper safety procedures are emphasized, such as relieving pressures, wearing protective equipment, and using lifting devices for heavy components.
Case 1021 f stage iv wheel loader service repair manualfjsjekdmmeme
This document provides instructions for removing an engine from a wheel loader. It outlines 16 steps to drain fluids, release pressures, disconnect electrical and hydraulic components, and detach hoses and mounts. Proper safety procedures are emphasized, such as relieving pressures, wearing protective equipment, and using lifting devices for heavy components.
CASE 921F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case wheel loaders models 821F and 921F with Tier 4B (final) engines. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding personal safety, machine safety, and the meaning of signal words like DANGER, WARNING, and CAUTION used throughout the manual.
CASE 1121F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual that contains contents, introduction, and torque specifications sections for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The torque specifications provided tightening torque ranges for hundreds of component fasteners including alternator, battery, axle, brake, chassis, cooling, DEF, and drivetrain parts.
CASE 1121F Tier 2 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document provides torque specifications for various components on a Case 1021F and 1121F wheel loader, including engines, axles, brakes, drivetrains, hydraulics, and other systems. Torque values are given for items like alternator and battery terminals, axle housing and wheel bolts, transmission mounting bolts, engine and chassis mounting hardware, fuel tank and sender fasteners, and hydraulic pump fittings. The document is intended to ensure components are properly tightened during maintenance and repair.
CASE 1021F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
The document is a service manual that provides instructions for removing the engine from a 1021F or 1121F machine. It lists 28 steps to remove components like the exhaust stack hood, SCR muffler, hydraulic lines, air intake tubes, and electrical connectors. Removing the engine requires draining fluids, releasing pressures, disconnecting hoses and wiring, and detaching mounting hardware.
More Related Content
Similar to New Holland E485C Crawler Excavator Service Repair Manual.pdf
Case 921 g tier 2 wheel loader service repair manualujdjjjkskmme
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g tier 2 wheel loader service repair manualudjfjjskkmdme
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 921 g tier 2 wheel loader service repair manualfujsjefjksekfsmem
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 921 g tier 2 wheel loader service repair manualfisejfjsekfksem
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g tier 2 wheel loader service repair manualfijsfjskekmme
This document is a service manual for CNH Industrial wheel loaders models 821G and 921G. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for technicians, and stresses the importance of following all safety precautions when working on the equipment.
Case 821 g tier 2 wheel loader service repair manualpfiskdmjekm
The document provides instructions for removing the engine from a wheel loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, draining coolant and engine oil, and removing panels to access the engine. Proper drainage and safety procedures are emphasized throughout.
Case 921 g tier 2 wheel loader service repair manualfksjksmmde
The document provides instructions for removing the engine from a wheel loader. Key steps include: parking the machine safely, discharging pressure from hydraulic and brake systems, draining coolant and engine oil, and removing panels to access the engine. Safety precautions and proper drain container placement are noted.
New holland w300 d tier 2 wheel loader service repair manualfujsejfksekkme
This document is a service manual for CNH Industrial Italia S.p.A. wheel loaders models W270D and W300D Tier 2. It contains safety information and detailed maintenance and repair instructions organized by system (e.g. engine, transmission, hydraulics). Technicians are instructed to follow all safety precautions and only perform repairs if authorized and with the engine stopped and hydraulic pressure relieved.
New holland w300 d tier 2 wheel loader service repair manualfusjejkdkmse
- The document provides instructions to remove an engine from a wheel loader. It is a 19 step process that includes draining fluids, disconnecting hoses, cables and brackets, and using lifting equipment to remove the engine as an assembly with the exhaust stack and precleaner. Proper safety procedures like relieving pressures in hydraulic and other systems are described.
Case 1121 f stage iv wheel loader service repair manualfhjsekfksemert
This document provides instructions for removing an engine from a wheel loader. It outlines 16 steps, including draining fluids, disconnecting battery cables, removing covers and hoses. Proper safety procedures are emphasized, such as relieving hydraulic pressure before working on the machine.
Case 1121 f stage iv wheel loader service repair manualfhjsekfksemert
This document is a service manual for wheel loaders models 1021F and 1121F. It contains introduction information and safety rules for working on the equipment. The manual is divided into sections covering the engine, transmission, axle systems, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, and other parts. It provides maintenance instructions and component level details for repairing and servicing the wheel loaders. Personal safety is emphasized, with warnings to stop the engine and relieve pressure before working on systems.
Case 1021 f stage iv wheel loader service repair manualfjkskmmdmme
This document provides instructions for removing an engine from a wheel loader. It outlines 16 steps to drain fluids, release pressures, disconnect electrical and hydraulic components, and detach hoses and mounts. Proper safety procedures are emphasized, such as relieving pressures, wearing protective equipment, and using lifting devices for heavy components.
Case 1021 f stage iv wheel loader service repair manualfjsjekdmmeme
This document provides instructions for removing an engine from a wheel loader. It outlines 16 steps to drain fluids, release pressures, disconnect electrical and hydraulic components, and detach hoses and mounts. Proper safety procedures are emphasized, such as relieving pressures, wearing protective equipment, and using lifting devices for heavy components.
Similar to New Holland E485C Crawler Excavator Service Repair Manual.pdf (18)
CASE 921F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case wheel loaders models 821F and 921F with Tier 4B (final) engines. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding personal safety, machine safety, and the meaning of signal words like DANGER, WARNING, and CAUTION used throughout the manual.
CASE 1121F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual that contains contents, introduction, and torque specifications sections for various components of an engine, transmission, drivetrain, axles, brakes, hydraulics, steering, wheels, cab climate control, and electrical systems. The torque specifications provided tightening torque ranges for hundreds of component fasteners including alternator, battery, axle, brake, chassis, cooling, DEF, and drivetrain parts.
CASE 1121F Tier 2 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document provides torque specifications for various components on a Case 1021F and 1121F wheel loader, including engines, axles, brakes, drivetrains, hydraulics, and other systems. Torque values are given for items like alternator and battery terminals, axle housing and wheel bolts, transmission mounting bolts, engine and chassis mounting hardware, fuel tank and sender fasteners, and hydraulic pump fittings. The document is intended to ensure components are properly tightened during maintenance and repair.
CASE 1021F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
The document is a service manual that provides instructions for removing the engine from a 1021F or 1121F machine. It lists 28 steps to remove components like the exhaust stack hood, SCR muffler, hydraulic lines, air intake tubes, and electrical connectors. Removing the engine requires draining fluids, releasing pressures, disconnecting hoses and wiring, and detaching mounting hardware.
CASE 1021F Tier 2 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
The document provides instructions to remove an engine from a Case 1021F or 1121F wheel loader. It involves draining fluids, disconnecting hoses, wiring harnesses, and other components attached to the engine like the air intake assembly, exhaust system, cooling system parts and mounting brackets. Lifting equipment is then used to remove the engine wall and extract the engine from the machine. Over 50 individual steps are outlined to fully separate the engine from the loader.
CASE 921F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
The document provides a 30 step procedure for removing the engine from an 821F and 921F wheel loader. It details disconnecting electrical and hydraulic components, draining fluids, removing mounting hardware and hoses/pipes, and using lifting straps to remove the engine. Proper tagging of electrical components is emphasized. The removal process prepares the engine for replacement or repair in another location by fully detaching it from the vehicle.
CASE 821F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
The document provides a 30 step procedure for removing the engine from an 821F and 921F wheel loader. It details disconnecting electrical and hydraulic components, draining fluids, removing mounting hardware and lifting the engine out of the machine. Special attention is given to tagging wires and hoses for reinstallation. The process requires draining coolant and oil before disconnecting intake, exhaust, cooling and fuel lines from the engine.
CASE 821E ZBAR SUGAR Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document provides a service manual for the 821E Wheel Loader. It contains information on the engine, transmis-
sion, front and rear axle systems, brakes, hydraulic systems, steering, wheels, cab climate control, electrical systems,
and platform/cab/bodywork. The manual is intended for qualified service personnel and provides specifications, func-
tional descriptions, diagnostics, and service procedures for maintaining and repairing the vehicle systems.
CASE 821E Tier3 Z-bar Wheel Loader Service Repair Manual [N7AE13000 - ].pdffujsekdkddm3e
This document provides a service manual for the 821E Wheel Loader. It contains information on the engine, transmis-
sion, front and rear axle systems, brakes, hydraulic systems, steering, wheels, cab climate control, electrical systems,
and platform/cab/bodywork. The manual is intended for qualified service personnel and provides specifications, func-
tional descriptions, diagnostics, and service procedures for maintaining and repairing the vehicle systems.
CASE 821F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for Case 821F and 921F wheel loaders with Tier 4B engines. It provides specifications and maintenance instructions for the engine, transmission, drivetrain, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, front loader, bucket, cab, and decals. The document contains section numbers and titles to help locate specific topics.
CASE 721F Tier 2 Wheel Loader Service Repair Manual PIN NBF213588 and above.pdffujsekdkddm3e
The document provides service manual instructions for removing the engine from Case wheel loaders models 621F and 721F. The steps include draining fluids, disconnecting wiring harnesses, removing panels and lifting the hood to access the engine which can then be unbolted and removed from the machine. Safety precautions are noted such as actuating the brakes to release pressure before working on hydraulic or electrical systems.
CASE 721F Tier 4 Wheel Loader Service Repair Manual.pdffujsekdkddm3e
The document provides a 31 step process to remove the engine from a 721F wheel loader. Key steps include draining coolant and oil, disconnecting wiring harnesses and hoses, removing the hood and accessories like the air cleaner, muffler, drive belt, and compressor. Lifting straps are used to remove the engine which is then lowered onto a platform for transport.
CASE 721E-EU Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document provides instructions for removing and installing the engine and radiator on a 721E wheel loader. The engine removal process involves disconnecting battery cables, draining fluids, removing mounted components, and using an engine lift to remove the engine from the loader. Engine installation is the reverse of removal. Radiator removal requires draining the coolant and removing mounting bolts, hoses and electrical connections. Radiator installation is the reverse of removal.
CASE 621F Tier 2 Wheel Loader Service Repair Manual PIN NBF213588 and above.pdffujsekdkddm3e
Disconnect backup alarm wiring harness from
mounting bracket (2).
RAPH12WEL0603AA 14
15. Remove the hood lift motor (1) by removing the
mounting bolts (2). Then place motor off to the side.
RAPH12WEL0604AA 15
16. Remove the hood lift cable (1) from the hood lift
bracket (2) by removing the retaining bolt (3).
RAPH12WEL0605AA 16
47388956 22/05/2012
10.001 / 8
Engine - Engine and crankcase
17. Remove the hood lift bracket (1) by removing the
mounting bolts (2).
R
CASE 621E Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document provides instructions for removing the engine from a CNH Italia 621E wheel loader. It is a repair manual section covering engine and radiator removal and installation. The 16 step process includes draining fluids, disconnecting wiring harnesses and hoses, removing mounting hardware, and using lifting equipment to remove the engine from the loader. References are made to other sections in the manual for additional repair information.
New Holland E85CMSR Midi Excavator Service Repair Manual.pdffujsekdkddm3e
This document is a service manual for an E85CMSR Midi Excavator. It contains information on engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blades, and other components. The manual provides specifications, diagrams, maintenance and repair instructions to aid service technicians in working on and troubleshooting issues with the excavator. Safety precautions are outlined and each section includes an index of subsections covering specific components and systems.
New Holland LW110B Wheel Loader Service Repair Manual.pdffujsekdkddm3e
This document provides instructions for removing and installing an engine and radiator on a New Holland Construction LW 110.B wheel loader. The 3-step process includes: 1) preparing the machine by lowering attachments, releasing pressures, and disconnecting batteries; 2) attaching lifting devices to the engine compartment and removing panels; and 3) removing engine and radiator components and installing the new engine.
CASE 445 Skid Steer Loader Service Repair Manual.pdffujsekdkddm3e
This repair manual provides technical information to support maintenance and service of equipment functions and systems. The manual is divided into sections for different machine systems. Each section contains chapters which provide technical specifications, descriptions of how systems work, diagnostic information, and service instructions. Technical information is indexed and searchable using location, type, and applicable product codes. The manual outlines how to perform a flow test of the hydraulic pump using a flowmeter to measure pump output.
CASE 445CT Compact Track Loader Service Repair Manual.pdffujsekdkddm3e
This repair manual provides instructions for servicing various components of construction equipment, including a 435, 445, and 445CT. It is divided into sections covering different systems, such as distribution systems, power production, and the work arm. The manual explains how to use the coding system to locate specific technical information, diagnostic data, and service procedures. It also provides instructions for performing flow tests to diagnose issues with hydraulic pumps and instructions for removing, disassembling, and inspecting a hydraulic pump.
CASE 435 Skid Steer Loader Service Repair Manual.pdffujsekdkddm3e
This repair manual provides instructions for servicing various components of construction equipment, including a 435, 445, and 445CT. It is divided into sections covering different systems, such as distribution systems, power production, and the work arm. The manual explains how to use the manual, outlines the component removal and inspection process, and provides diagnostic instructions for testing hydraulic pump flow.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
6. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation which, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information which clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47483341A 14/02/2013
3
7. INTRODUCTION
Personal safety
Carefully read this Manual before proceeding with main-
tenance, repairs, refuelling or other machine operations.
Repairs have to be carried out only by authorized and in-
structed staff; specific precautions have to be taken when
grinding, welding or when using mallets or heavy ham-
mers.
Not authorized persons are not allowed to repair or carry
out maintenance on this machine. Do not carry out any
work on the equipment without prior authorization.
Ask your employer about the safety instructions in force
and safety equipment.
Nobody is allowed to seat on the operator’s place during
machine maintenance unless he is a qualified operator
helping with the maintenance work.
If it is necessary to move the equipment to carry out re-
pairs or maintenance, do not lift or lower the equipment
from any other position than the operator’s seat.
TULI12WEX2004AA 1
Never carry out any operation on the machine when the
engine is running, except when specifically indicated.
Stop the engine and ensure that all pressure is relieved
from hydraulic circuits before removing caps, covers,
valves, etc.
All repair and maintenance operations should be carried
out with the greatest care and attention.
Service stairs and platforms used in a workshop or in the
field should be built in compliance with the safety rules in
force.
Any functional disorders, especially those affecting the
safety of the machine, should therefore be rectified im-
mediately.
DANGER
Unexpected movement!
Make sure parking brake is applied. Secure
machine with wheel chocks.
Failure to comply will result in death or serious
injury.
D0013A
TULI12WEX2005AA 2
Before performing any work on the machine, attach a
maintenance in progress tag. This tag can be applied on
the left-hand control lever, safety lever or cab door.
TULI12WEX2006AA 3
47483341A 14/02/2013
4
8. INTRODUCTION
Emergency
Be prepared for emergencies. Always keep at disposal on
the machine a first aid kit and a fire extinguisher. Make
sure that the fire extinguisher is serviced in accordance
with the manufacturer’s instructions.
SMIL12WEX0174AA 4
Equipment
Wear close fitting clothing and safety equipment appropri-
ate for the job:
• Safety helmet
• Safety shoes
• Heavy gloves
• Reflective clothing
• Wet weather clothing
If environment condition require it following personal
safety equipment should be at hand:
• Respirators (or dust proof masks)
• Ear plugs or acoustic ears protections
• Goggles with lateral shield or masks for eyes protection
Do not wear rings, wristwatches, jewels, unbuttoned or
flapping clothing such as ties, torn clothes, scarves, open
jackets or shirts with open zips which could get caught into
moving parts.
TULI12WEX2008AA 5
Engine - Radiator
Never leave the engine run in closed spaces without venti-
lation and not able to evacuate toxic exhaust gases. Keep
the exhaust manifold and tube free from combustion ma-
terials.
Do not refuel with the engine running, especially if hot, as
this increases fire hazard in case of fuel spillage.
Never attempt to check or adjust the belts when the en-
gine is running.
Never lubricate the machine with the engine running.
TULI12WEX2009AA 6
47483341A 14/02/2013
5
10. Engine - Engine and crankcase
Engine - General specification
Performance
Maximum climbable gradient 70%
Swing speed 7.8 RPM
Travel speed
Slow 3.5 km/h (2 mph)
Fast 5.6 km/h (3 mph)
Engine specifications
Main specifications – RUSSIAN FEDERATION – MIDDLE EAST –AFRICA
Maker HINO MOTORS
Model P11CUU
Type
Water-cooled, 4 cycle direct injection type diesel engine with
intercooler turbo-charger
Number of cylinders 6 in-line
Bore 122 mm (4.80 in)
Stroke 150 mm (5.91 in)
Total displacement 10520 cm³ (642 in³)
Compression ratio 17:1
Rated output power (at 1850 RPM) ( ISO 14396:
without fan)
257 kW (349 Hp)
Maximum torque (at 1400 RPM) ( ISO 14396) 1400 N·m (1032.6 lb ft)
High idling 2050 RPM
Low idling 800 RPM
Fuel consumption rate 213 g/kWh ±6
Engine oil quantity 42.5 l (11.23 US gal)
Weight 1150 kg (2535.3 lb)
Main specifications - TURKEY
Maker HINO MOTORS
Model P11CUP
Type
Water-cooled, 4 cycle direct injection type diesel engine with
intercooler turbo-charger
Number of cylinders 6 in-line
Bore 122 mm (4.80 in)
Stroke 150 mm (5.91 in)
Total displacement 10520 cm³ (642 in³)
Compression ratio 17:1
Rated output power (at 1850 RPM) ( ISO 14396:
without fan)
257 kW (349 Hp)
Maximum torque (at 1400 RPM) ( ISO 14396) 1400 N·m (1032.6 lb ft)
High idling 2050 RPM
Low idling 800 RPM
Fuel consumption rate 213 g/kWh ±6
Engine oil quantity 42.5 l (11.2 US gal)
Weight 1150 kg (2535.3 lb)
Feeding
Type Electron type
Injection sequence 1-4-2-6-3-5
47483341A 14/02/2013
10.1 [10.001] / 3
11. Engine - Engine and crankcase
Battery (RUSSIAN FEDERATION – MIDDLE EAST – AFRICA)
Voltage 2 x 12 V
Capacity 2 x 176 A·h
Battery (TURKEY)
Voltage 2 x 12 V
Capacity 2 x 160 A·h
Starter motor
Maker SAWAFUJI
Voltage 24 V
Output 6 kW (8 Hp)
Alternator
Maker SAWAFUJI
Voltage 24 V
Output 60 A
47483341A 14/02/2013
10.1 [10.001] / 4
12. Engine - Pan and covers
Engine oil pan - Component identification (P11C-UP only)
SMIL13CEX0323GA 1
12111 Oil pan 12151 Gasket*
12149 Drain cock 9659C Gasket*
*Parts not to be reused.
Tightening torque
12149 69 N·m (610.7 lb in) 9191-10451 51 N·m (451.4 lb in)
9191-08452 31 N·m (274.4 lb in)
47483341A 14/02/2013
10.2 [10.102] / 3
13. Engine - Pan and covers
Engine oil pan - Component identification (P11C-UU only)
SMIL13CEX0515GA 1
12111 Oil pan 12151 Gasket*
12149 Drain cock 9659C Gasket*
*Parts not to be reused.
Tightening torque
12149 69 N·m (610.7 lb in) 9191-10451 51 N·m (451.4 lb in)
9191-08452 31 N·m (274.4 lb in)
47483341A 14/02/2013
10.2 [10.102] / 4
14. Engine - Pan and covers
Engine oil pan - Remove
1. Remove bolts and remove the oil pan. Refer to En-
gine oil pump - Remove (10.304).
ATTENTION: If the gasket is sticking, remove it using a
scraper, etc.
47483341A 14/02/2013
10.2 [10.102] / 5
15. Engine - Pan and covers
Engine oil pan - Install
1. Apply a small amount of liquid gasket (G) [Threebond
TB1211 (white)] to the step of the joint surface be-
tween the timing gear case and the cylinder block
and between the flywheel housing and the cylinder
block.
2. Replace the gasket with a new one and install the oil
pan.
Tightening torque :
25 N·m (221.3 lb in)
ATTENTION: Wipe off oil on the oil pan and cylinder block
before installation.
SMIL13CEX0324AB 1
47483341A 14/02/2013
10.2 [10.102] / 6
16. Engine - Pan and covers
Timing gear housing - Remove
Removal of crankshaft front oil seal
1. Reference: "Engine mechanical, Timing gear cover
and flywheel housing. Refer to Crankshaft oil seal -
Remove (10.103) for the removal of crankshaft front
oil seal.
Removal of timing gear case cover
2. Remove bolts and remove the timing gear cover.
47483341A 14/02/2013
10.2 [10.102] / 7
17. Engine - Pan and covers
Timing gear housing - Install
Installation of timing gear cover
1. Replace the gasket and O–ring with new ones and
install the timing gear cover.
Tightening torque: 44 N·m (389.4 lb in)
2. Cut the gasket projecting to the engine lower surface
so that it becomes a flat surface.
Installation of crankshaft front oil seal
1. Reference: "Engine mechanical, Timing gear cover
and flywheel housing. Refer to Crankshaft oil seal -
Install (10.103) for the installation of crankshaft front
oil seal.
47483341A 14/02/2013
10.2 [10.102] / 8
21. Engine - Valve drive and gears
Camshaft - Remove
1. Remove the push rod cover on the side of the engine.
2. Hold the roller tappet so that it does not fall using a
special tool.
Special tool : Stopper
SMIL13CEX0214AA 1
3. Turn the camshaft gear, align the camshaft gear hole
with the thrust plate mounting bolt position, remove
the bolt and remove the shaft.
ATTENTION: Pull out the cam bearing so that it is not dam-
aged.
NOTICE: Refer to the following for installation of the
camshaft. Reference: Camshaft - Install (10.106).
SMIL13CEX0215AA 2
47483341A 14/02/2013
10.3 [10.106] / 6
22. Engine - Valve drive and gears
Camshaft - Disassemble
1. Fix the camshaft through an aluminum plate, etc.
with a vice and remove the camshaft gear bolt.
ATTENTION: Prevent faulty conditions on the gear such
as deformation, impact, scratch, etc.
2. Pull out the main bearing from the crankshaft using
a special tool.
Special tool : Timing gear puller
NOTICE: Refer to the following for inspection and as-
sembly of the camshaft. Reference: Camshaft - Inspect
(10.106), Reference: Camshaft - Install (10.106).
SMIL13CEX0216AA 1
47483341A 14/02/2013
10.3 [10.106] / 7
23. Engine - Valve drive and gears
Camshaft - Inspect
1. Measure the cam height using a micrometer. If it is
beyond the operation limit, replace the camshaft.
SMIL13CEX0217AA 1
Standard value Operation limit
IN 56.03 mm (2.2059 in) 55.23 mm (2.1744 in)
Cam height
EX 53.72 mm (2.1150 in) 52.92 mm (2.0835 in)
IN 6.63 mm (0.2610 in) 6.48 mm (0.2551 in)
Cam lift
EX 8.72 mm (0.3433 in) 8.57 mm (0.3374 in)
Inspection of camshaft bearing oil clearance
1. Measure the outer diameter of the camshaft journal
using a micrometer.
SMIL13CEX0218AA 2
Standard value
Journal No. 1 65.0 mm (2.5591 in)
Journal No. 2 64.6 mm (2.5433 in)
Journal No. 3 64.2 mm (2.5276 in)
Journal No. 4 63.8 mm (2.5118 in)
Journal No. 5 63.4 mm (2.4961 in)
Journal No. 6 63.0 mm (2.4803 in)
Journal No. 7 62.6 mm (2.4646 in)
2. Measure the camshaft bearing inner diameter using
a cylinder gauge.
3. Calculate the difference between the outer diameter
of the camshaft journal and the inner diameter of the
camshaft bearing. If it is beyond the operation limit,
replace the camshaft or camshaft bearing.
Standard value Repair limit
0.030 mm (0.0012 in) - 0.120 mm (0.0047 in) 0.30 mm (0.0118 in)
47483341A 14/02/2013
10.3 [10.106] / 8
24. Engine - Valve drive and gears
Inspection of camshaft runout
1. Hold the camshaft with the V-block, measure the ro-
tation runout of the camshaft using a dial gauge. If it
is beyond the operation limit, replace the camshaft.
Operation limit: 0.05 mm (0.0020 in)
SMIL13CEX0219AA 3
47483341A 14/02/2013
10.3 [10.106] / 9
25. Engine - Valve drive and gears
Camshaft - Install
Installation of ring gear
1. Insert the spacer and thrust plate into the camshaft.
2. Warm the cam gear to approx. 180 °C (356 °F) using
a heater (piston heater, etc.).
ATTENTION: Do not touch parts with bare hand because
they are hot.
3. Apply engine oil to the bolt seating and thread, fix the
cam gear using a vice with the part number stamp
surface facing outside, and tighten the bolt.
Tightening torque : 137 N·m (1212.6 lb in)
ATTENTION: Prevent faulty conditions on the gear such
as deformation, impact, scratch, etc.
4. Tighten the bolt again to the specified torque after the
cam gear decreases to room temperature.
SMIL13CEX0220AA 1
47483341A 14/02/2013
10.3 [10.106] / 10
26. Engine - Valve drive and gears
Camshaft - Inspect
1. Measure the camshaft end play (1) using a thickness
gauge and measure the thrust plate thickness (2) us-
ing calipers. If it is beyond the operation limit, replace
the thrust plate.
SMIL13CEX0221AB 1
SMIL13CEX0222AB 2
Standard value Operation limit
End play
0.10 mm (0.0039 in) - 0.23 mm
(0.0091 in)
0.3 mm (0.0118 in)
Thrust plate thickness 8 mm (0.315 in) —
47483341A 14/02/2013
10.3 [10.106] / 11
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Engine - Valve drive and gears
Camshaft - Install
Tappet installation
1. Insert the tappet coated with engine oil.
ATTENTION: Check the tappet visually for absence of ec-
centric wear, cracks, scratches, etc.
2. Use the special tool and secure the tappet.
Special tool: Stopper
SMIL13CEX0223AA 1
3. Apply engine oil to the camshaft journal and insert it
into the cylinder block while turning the camshaft.
ATTENTION: Do not damage the camshaft bearing.
4. Install the camshaft using 4 bolts.
5. Make sure that the camshaft end play is the standard
value.
Standard value: 0.10 mm (0.0039 in) - 0.23 mm
(0.0091 in)
SMIL13CEX0215AA 2
6. Apply the liquid gasket [Threebond TB1207C (red) or
equivalent] and install the push rod cover.
ATTENTION: Apply it continuously.
Apply the liquid gasket at the width of 1.5 mm (0.0591 in)
to 2.5 mm (0.0984 in).
Install it within 20 minutes after application of the liquid gas-
ket.
SMIL13CEX0214AA 3
47483341A 14/02/2013
10.3 [10.106] / 12
29. Engine - Valve drive and gears
Camshaft gear - Remove
Removal of supply pump drive gear
1. Refer to: Pump drives - Remove (10.114).
Removal of idle gear and main idle gear
1. Remove the idle gear shaft mounting bolts of the idle
gear and main idle gear.
2. Remove the thrust plate and main idle gear at the
main idle gear side.
SMIL13CEX0226AA 1
Removal of idle gear shaft
1. Pull out each idle gear shaft using the special tool.
Special tool :
Sliding hammer
Idle gear shaft puller adapter
ATTENTION: Do not remove the idle gear shaft unless nec-
essary.
ATTENTION: Refer to the following for installation of the
timing gear. Reference: Camshaft gear - Install (10.106).
SMIL13CEX0227AA 2
47483341A 14/02/2013
10.3 [10.106] / 13
30. Engine - Valve drive and gears
Camshaft gear - Inspect
Inspection of idle gear oil clearance
1. Measure the idle gear shaft outer diameter using a
micrometer and measure the idle gear bushing inner
diameter using a cylinder gauge.
SMIL13CEX0228BA 1
Standard value
Shaft outer diameter 64 mm (2.520 in)
Main idle gear
Bushing inner diameter 64 mm (2.520 in)
Shaft outer diameter 52 mm (2.047 in)
Idle gear
Bushing inner diameter 52 mm (2.047 in)
2. Calculate the difference between the idle gear shaft
outer diameter and the idle gear bushing inner diam-
eter. If it is beyond the operation limit, replace the
idle gear shaft and the idle gear bushing.
Standard value Operation limit
Main idle gear
0.030 mm (0.0012 in) - 0.090 mm
(0.0035 in)
0.20 mm (0.0079 in)
Idle gear
0.030 mm (0.0012 in) - 0.090 mm
(0.0035 in)
0.20 mm (0.0079 in)
47483341A 14/02/2013
10.3 [10.106] / 14
31. Engine - Valve drive and gears
Camshaft gear - Install
Temporary tightening of air compressor idle gear shaft
1. Apply engine oil to the idle gear shaft.
2. Direct the identification hole (1) of the idle gear shaft
to the lower part of the engine and fix the idle gear
shaft, gear and thrust plate temporarily.
Special tools :
Plate
Guide
ATTENTION: Press-fit vertically so that the idle gear shaft
does not hit the timing gear case.
3. Remove the special tool, apply engine oil to the bolt
seating and the bolt thread and fix it temporarily.
SMIL13CEX0229AB 1
Installation of idle gear
1. Align the gear mark and install each idle gear (2) and
(3).
Tightening torque:
Main idle gear (2)
44 N·m (389.4 lb in)
Idle gear (3)
108 N·m (955.9 lb in)
2. Make sure that each backlash and end play are
within the standard value after installation. "Refer-
ence: Camshaft gear - Inspect (10.106).
SMIL13CEX0230BB 2
47483341A 14/02/2013
10.3 [10.106] / 15
32. Engine - Valve drive and gears
Camshaft gear - Inspect
Inspection of backlash for each gears
1. Measure backlash between gears using a dial
gauge. If it is beyond the operation limit, replace the
gear.
SMIL13CEX0231AA 1
Standard value Operation limit
Between supply pump drive gear and
main idle gear (No.2)
0.05 mm (0.0020 in) - 0.19 mm
(0.0075 in)
0.30 mm (0.0118 in)
Between camshaft gear and main
idle gear (No.2)
0.07 mm (0.0028 in) - 0.19 mm
(0.0075 in)
0.30 mm (0.0118 in)
Between camshaft gear and idle gear
0.06 mm (0.0024 in) - 0.19 mm
(0.0075 in)
0.30 mm (0.0118 in)
Between main idle gear (No. 2) and
crankshaft gear
0.07 mm (0.0028 in) - 0.19 mm
(0.0075 in)
0.30 mm (0.0118 in)
Between oil pump drive gear and oil
pump driven gear
0.06 mm (0.0024 in) - 0.19 mm
(0.0075 in)
0.40 mm (0.0157 in)
Inspection of idle gear end play
2. Measure the end play of the main idle gear and idle
gear using a thickness gauge. If it is beyond the
operation limit, replace the gear and shaft.
SMIL13CEX0232AA 2
Standard value Operation limit
Main idle gear
0.065 mm (0.0026 in) - 0.149 mm
(0.0059 in)
0.30 mm (0.0118 in)
Idle gear
0.070 mm (0.0028 in) - 0.125 mm
(0.0049 in)
0.30 mm (0.0118 in)
47483341A 14/02/2013
10.3 [10.106] / 16