This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, engine, and option information for a hydraulic excavator model. It contains safety warnings and precautions for operating and servicing the machine. Key points include only performing maintenance after thoroughly reading the manual, wearing protective equipment, relieving pressures, lowering attachments, using proper lifting techniques, and ensuring all guards are in place before operating.
New holland e215 bj hydraulic excavator service repair manualujfdjjkskkdme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, engine, and option information for a hydraulic excavator model. It contains safety warnings and precautions for working on the excavator. Some key points include:
- Do not operate or perform maintenance until thoroughly reading the operator's and shop manuals.
- Take safety precautions like wearing protective equipment, relieving pressures, and blocking components before working on the excavator.
- Follow proper procedures and use caution when servicing components to avoid injury from falling parts, burns, flying chips, and other hazards.
New holland e215 bj hydraulic excavator service repair manual instant downloadufjjsjdkkskem
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and details for hydraulic, electrical and welding repairs. Measurement units and applicable machine models are also listed. The key points are:
- Clean equipment before repairs and record inspection details
- Wear protective equipment and block up machines safely
- Relieve hydraulic pressure and contain oil before disconnecting lines
- Take safety precautions for electrical and welding work
- International units and applicable machine models are defined
New holland kobelco e265 bj crawler excavator service repair manual instant d...ufdjjskekfkskem
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for operating and servicing the excavator.
New holland kobelco e265 bj crawler excavator service repair manualujfdjjkskkdme
This document provides a shop manual for a hydraulic excavator that includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installation options. It emphasizes safety precautions that should be taken when operating or servicing the excavator, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and using lifting equipment for heavy components. The manual warns of hazards like hot parts, high pressure fluids, and falling attachments.
New holland e215 b hydraulic excavator service repair manualfkksejfjskemm
This document is a shop manual that contains specifications, maintenance, system, disassembly, troubleshooting, engine, and options sections for a hydraulic excavator model. It provides general safety information and precautions for operating and servicing the excavator. Some key safety points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working on the machine, using proper lifting techniques, and ensuring all guards are in place before operating.
Kobelco 80 cs 2 acera hydraulic excavator service repair manualujjjjfkksekmmdm
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
Case cx36 b mini excavator service repair manualolfjsekdmmes
This document provides safety precautions for maintenance and repair of an excavator. It outlines 21 precautions, including wearing protective equipment, disconnecting power sources before working, relieving pressure from systems, and lowering attachments to the ground. Precautions address proper lifting techniques, hot surfaces, guard replacement, and ensuring all fasteners and shields are securely in place before operation. The document emphasizes understanding repair procedures and using caution during maintenance to prevent injuries.
Case cx27 b mini excavator service repair manualfjskemdzaqmme
This document is an index and introduction for a shop manual for hydraulic excavators.
The index lists the main sections and subsections of the manual, including specifications, maintenance procedures, system descriptions, disassembly instructions, troubleshooting guides, engine information, and optional attachment installation procedures.
The introduction provides general safety precautions and preparation for repairs. It emphasizes understanding operating procedures before disassembly, cleaning the machine, recording inspection details, wearing protective equipment, releasing hydraulic pressure, and using proper tools and lifting equipment. The manual aims to provide technical information for maintenance and repair services.
New holland e215 bj hydraulic excavator service repair manualujfdjjkskkdme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, engine, and option information for a hydraulic excavator model. It contains safety warnings and precautions for working on the excavator. Some key points include:
- Do not operate or perform maintenance until thoroughly reading the operator's and shop manuals.
- Take safety precautions like wearing protective equipment, relieving pressures, and blocking components before working on the excavator.
- Follow proper procedures and use caution when servicing components to avoid injury from falling parts, burns, flying chips, and other hazards.
New holland e215 bj hydraulic excavator service repair manual instant downloadufjjsjdkkskem
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and details for hydraulic, electrical and welding repairs. Measurement units and applicable machine models are also listed. The key points are:
- Clean equipment before repairs and record inspection details
- Wear protective equipment and block up machines safely
- Relieve hydraulic pressure and contain oil before disconnecting lines
- Take safety precautions for electrical and welding work
- International units and applicable machine models are defined
New holland kobelco e265 bj crawler excavator service repair manual instant d...ufdjjskekfkskem
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for operating and servicing the excavator.
New holland kobelco e265 bj crawler excavator service repair manualujfdjjkskkdme
This document provides a shop manual for a hydraulic excavator that includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installation options. It emphasizes safety precautions that should be taken when operating or servicing the excavator, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and using lifting equipment for heavy components. The manual warns of hazards like hot parts, high pressure fluids, and falling attachments.
New holland e215 b hydraulic excavator service repair manualfkksejfjskemm
This document is a shop manual that contains specifications, maintenance, system, disassembly, troubleshooting, engine, and options sections for a hydraulic excavator model. It provides general safety information and precautions for operating and servicing the excavator. Some key safety points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working on the machine, using proper lifting techniques, and ensuring all guards are in place before operating.
Kobelco 80 cs 2 acera hydraulic excavator service repair manualujjjjfkksekmmdm
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
Case cx36 b mini excavator service repair manualolfjsekdmmes
This document provides safety precautions for maintenance and repair of an excavator. It outlines 21 precautions, including wearing protective equipment, disconnecting power sources before working, relieving pressure from systems, and lowering attachments to the ground. Precautions address proper lifting techniques, hot surfaces, guard replacement, and ensuring all fasteners and shields are securely in place before operation. The document emphasizes understanding repair procedures and using caution during maintenance to prevent injuries.
Case cx27 b mini excavator service repair manualfjskemdzaqmme
This document is an index and introduction for a shop manual for hydraulic excavators.
The index lists the main sections and subsections of the manual, including specifications, maintenance procedures, system descriptions, disassembly instructions, troubleshooting guides, engine information, and optional attachment installation procedures.
The introduction provides general safety precautions and preparation for repairs. It emphasizes understanding operating procedures before disassembly, cleaning the machine, recording inspection details, wearing protective equipment, releasing hydraulic pressure, and using proper tools and lifting equipment. The manual aims to provide technical information for maintenance and repair services.
New holland e215 bj hydraulic excavator service repair manualufjkskemfseol
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New holland e215 bj hydraulic excavator service repair manualfhjsekfksemert
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and techniques for working with hydraulic and electrical systems. The document emphasizes cleaning equipment before work, recording inspection details, having the proper tools, and releasing pressure from hydraulic lines before disconnecting fittings. Overall it stresses taking safety precautions and planning ahead to efficiently and safely perform maintenance and repairs.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdff8uusejkddm7u
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and techniques for working with hydraulic and electrical systems. Key points covered include cleaning equipment before repairs, recording inspection details, releasing hydraulic pressure, draining oil from removed parts, and taking care with heavy components. Proper tools and work areas are emphasized.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdffujsekdkddm3e
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdfzpdj618286
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdffujekmd8dikd
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and techniques for working with hydraulic and electrical systems. The document emphasizes cleaning equipment before work, recording inspection details, having the proper tools, and releasing pressure from hydraulic lines before disconnecting fittings. Overall it stresses taking safety precautions, preparing appropriately, and following procedures to safely service excavator components.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdfufjskem9didok
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdffujskekdmd3e
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices when disassembling and assembling, and specifics for working with hydraulic, electrical and welded components. Measurement units and applicable machine models are also listed. Key points include cleaning machines before repairs, using proper tools, releasing pressure from hydraulic systems, wearing protective gear, and grounding attachments before working on them.
New holland kobelco e265 bj crawler excavator service repair manualfusjefjskefkksem
This document provides a shop manual for a hydraulic excavator that includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installation options. It emphasizes safety precautions that should be taken when operating or servicing the excavator, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and using lifting equipment for heavy components. The manual warns of hazards like hot surfaces, high pressure fluids, and falling attachments.
New holland kobelco e265 bj crawler excavator service repair manualujdjfjkskmdm
This document provides guidelines and safety precautions for servicing a hydraulic excavator. It discusses preparing for disassembly by cleaning the machine, inspecting components, and recording inspection details. When disassembling and assembling, personal protective equipment should be worn and safety tags used to prevent operation. Hydraulic components should be depressurized and electrical sources disconnected before work. Proper tools and parts storage is required. Metric units are used, and sections cover general repairs, hydraulics, welding, and environmental protection.
New holland kobelco e265 bj crawler excavator service repair manualfujsjfskekmm
This document provides a shop manual for a hydraulic excavator that includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installation options. It emphasizes safety precautions that should be taken when operating or servicing the excavator, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and using lifting equipment for heavy components. The manual warns of hazards like hot surfaces, high pressure fluids, and falling attachments.
New holland kobelco e265 bj crawler excavator service repair manualfhjsekfksemert
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper safety equipment.
2. Guidelines for disassembling and assembling hydraulic, electrical, and other components safely.
3. Notes on welding repairs, environmental protection, and the international system of units for measurements.
4. An index of chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments.
The document aims to collect all necessary technical information for maintenance and repairs in one place for reference. Safety is emphasized throughout for protecting service personnel.
New holland kobelco e265 bj crawler excavator service repair manualufjkskemfseol
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for operating and servicing the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdffujskekdmd3e
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper tools.
2. Safety procedures for disassembly and assembly, including relieving hydraulic pressures, blocking components, and using hoists for heavy parts.
3. Notes on hydraulic, electrical and welding repairs, and handling hydraulic fluids and parts.
4. An outline of the document sections which cover specifications, maintenance, systems, disassembly, troubleshooting, engines and optional attachments.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdfzpdj618286
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document outlines important safety information and precautions that should be followed when operating or servicing the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdffujsekdkddm3e
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for working on the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdfufjskem9didok
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for operating and servicing the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdff8seujdjkddm
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper safety equipment.
2. Guidelines for disassembling and assembling hydraulic, electrical, and other components safely.
3. Notes on welding repairs, environmental protection, and the international system of units for measurements.
4. An index of chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments.
The document aims to collect all necessary technical information for maintenance and repairs in one place for reference. Safety is emphasized throughout for protecting service personnel.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdffujekmd8dikd
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper safety equipment.
2. Guidelines for disassembling and assembling hydraulic, electrical, and other components safely.
3. Notes on welding repairs, environmental protection, and the international system of units for measurements.
4. An index of chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments.
The document aims to collect all necessary technical information for maintenance and repairs in one place for reference. Safety is emphasized throughout for protecting service personnel.
Kobelco 80 cs 2 acera hydraulic excavator service repair manualufjjsejfkskemme
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
New holland w230 c tier 4a (interim) wheel loader service repair manualujdjfjkskmdm
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New holland w130 c wheel loader service repair manualujdjfjkskmdm
This document provides instructions for removing the engine from a wheel loader. It is a 19 step process that includes draining fluids, disconnecting wiring harnesses and hoses, and using lifting equipment to remove the engine. Safety procedures are described such as releasing hydraulic pressure before removal. The level of detail provided in the instructions suggests this is meant to guide a mechanic through the engine removal process.
More Related Content
Similar to New holland e215 bj hydraulic excavator service repair manual
New holland e215 bj hydraulic excavator service repair manualufjkskemfseol
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New holland e215 bj hydraulic excavator service repair manualfhjsekfksemert
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and techniques for working with hydraulic and electrical systems. The document emphasizes cleaning equipment before work, recording inspection details, having the proper tools, and releasing pressure from hydraulic lines before disconnecting fittings. Overall it stresses taking safety precautions and planning ahead to efficiently and safely perform maintenance and repairs.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdff8uusejkddm7u
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and techniques for working with hydraulic and electrical systems. Key points covered include cleaning equipment before repairs, recording inspection details, releasing hydraulic pressure, draining oil from removed parts, and taking care with heavy components. Proper tools and work areas are emphasized.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdffujsekdkddm3e
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdfzpdj618286
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdffujekmd8dikd
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices like wearing protective gear and blocking up equipment, and techniques for working with hydraulic and electrical systems. The document emphasizes cleaning equipment before work, recording inspection details, having the proper tools, and releasing pressure from hydraulic lines before disconnecting fittings. Overall it stresses taking safety precautions, preparing appropriately, and following procedures to safely service excavator components.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdfufjskem9didok
This document appears to be a shop manual for maintaining and repairing a hydraulic excavator. It contains several sections including specifications, maintenance, systems, disassembly, troubleshooting, and engine sections. The document provides general safety information and precautions for working on the excavator. It emphasizes reading all instructions before operating or servicing the machine and describes safety symbols and procedures for things like relieving pressure, lifting heavy components, welding, and ensuring guards are in place.
New Holland E215BJ Hydraulic Excavator Service Repair Manual.pdffujskekdmd3e
This document provides guidelines and safety precautions for servicing and repairing excavator equipment. It outlines procedures for preparing to disassemble parts, safety practices when disassembling and assembling, and specifics for working with hydraulic, electrical and welded components. Measurement units and applicable machine models are also listed. Key points include cleaning machines before repairs, using proper tools, releasing pressure from hydraulic systems, wearing protective gear, and grounding attachments before working on them.
New holland kobelco e265 bj crawler excavator service repair manualfusjefjskefkksem
This document provides a shop manual for a hydraulic excavator that includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installation options. It emphasizes safety precautions that should be taken when operating or servicing the excavator, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and using lifting equipment for heavy components. The manual warns of hazards like hot surfaces, high pressure fluids, and falling attachments.
New holland kobelco e265 bj crawler excavator service repair manualujdjfjkskmdm
This document provides guidelines and safety precautions for servicing a hydraulic excavator. It discusses preparing for disassembly by cleaning the machine, inspecting components, and recording inspection details. When disassembling and assembling, personal protective equipment should be worn and safety tags used to prevent operation. Hydraulic components should be depressurized and electrical sources disconnected before work. Proper tools and parts storage is required. Metric units are used, and sections cover general repairs, hydraulics, welding, and environmental protection.
New holland kobelco e265 bj crawler excavator service repair manualfujsjfskekmm
This document provides a shop manual for a hydraulic excavator that includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engine procedures, and installation options. It emphasizes safety precautions that should be taken when operating or servicing the excavator, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and using lifting equipment for heavy components. The manual warns of hazards like hot surfaces, high pressure fluids, and falling attachments.
New holland kobelco e265 bj crawler excavator service repair manualfhjsekfksemert
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper safety equipment.
2. Guidelines for disassembling and assembling hydraulic, electrical, and other components safely.
3. Notes on welding repairs, environmental protection, and the international system of units for measurements.
4. An index of chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments.
The document aims to collect all necessary technical information for maintenance and repairs in one place for reference. Safety is emphasized throughout for protecting service personnel.
New holland kobelco e265 bj crawler excavator service repair manualufjkskemfseol
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for operating and servicing the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdffujskekdmd3e
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper tools.
2. Safety procedures for disassembly and assembly, including relieving hydraulic pressures, blocking components, and using hoists for heavy parts.
3. Notes on hydraulic, electrical and welding repairs, and handling hydraulic fluids and parts.
4. An outline of the document sections which cover specifications, maintenance, systems, disassembly, troubleshooting, engines and optional attachments.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdfzpdj618286
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document outlines important safety information and precautions that should be followed when operating or servicing the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdffujsekdkddm3e
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for working on the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdfufjskem9didok
This document is a shop manual that provides specifications, maintenance, system, disassembly, and troubleshooting information for a hydraulic excavator. It contains 7 main sections: 1) Specifications, 2) Maintenance, 3) Systems, 4) Disassembly, 5) Troubleshooting, 6) Engine, and 7) Options. The document provides general safety information and precautions for operating and servicing the excavator.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdff8seujdjkddm
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper safety equipment.
2. Guidelines for disassembling and assembling hydraulic, electrical, and other components safely.
3. Notes on welding repairs, environmental protection, and the international system of units for measurements.
4. An index of chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments.
The document aims to collect all necessary technical information for maintenance and repairs in one place for reference. Safety is emphasized throughout for protecting service personnel.
New Holland Kobelco E265BJ Crawler Excavator Service Repair Manual.pdffujekmd8dikd
This document provides instructions and safety precautions for maintaining and repairing a hydraulic excavator. It includes:
1. General precautions for repairs such as preparing the work area, recording inspection details, and using proper safety equipment.
2. Guidelines for disassembling and assembling hydraulic, electrical, and other components safely.
3. Notes on welding repairs, environmental protection, and the international system of units for measurements.
4. An index of chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments.
The document aims to collect all necessary technical information for maintenance and repairs in one place for reference. Safety is emphasized throughout for protecting service personnel.
Kobelco 80 cs 2 acera hydraulic excavator service repair manualufjjsejfkskemme
This document is a service manual for a hydraulic excavator that contains 7 sections: specifications, maintenance, systems, disassembly, troubleshooting, engine, and installing options. It provides general safety information and precautions for operating and servicing the excavator. Some key points include wearing protective equipment, relieving pressure from systems before disconnecting lines, lowering attachments to the ground before working, and using lifting equipment for heavy components.
Similar to New holland e215 bj hydraulic excavator service repair manual (20)
New holland w230 c tier 4a (interim) wheel loader service repair manualujdjfjkskmdm
This service manual provides information on servicing the W190C/W230C Tier 4A wheel loader. The manual contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Safety precautions are provided throughout to prevent injury or damage when servicing the machine.
New holland w130 c wheel loader service repair manualujdjfjkskmdm
This document provides instructions for removing the engine from a wheel loader. It is a 19 step process that includes draining fluids, disconnecting wiring harnesses and hoses, and using lifting equipment to remove the engine. Safety procedures are described such as releasing hydraulic pressure before removal. The level of detail provided in the instructions suggests this is meant to guide a mechanic through the engine removal process.
New holland w70 c hs tier 4a (interim) compact wheel loader service repair ma...ujdjfjkskmdm
This document is a service manual for New Holland compact wheel loaders models W50C, W60C, W70C, and W80C. It contains instructions for repairing and maintaining the engine, fuel system, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides detailed sections for major components with part numbers and instructions.
New holland u80 c tier 4 tractor backhoe service repair manual (from pin ncc5...ujdjfjkskmdm
This document is a service manual for a U80C Tier 4 Tractor Backhoe from PIN NCC570800. It contains information on the engine, transmission, front and rear axle systems, brakes and controls, hydraulic systems, hitches and drawbars, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules are provided at the beginning regarding proper operation, maintenance, and repair of the machine.
New holland td5.75 tractor service repair manualujdjfjkskmdm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians.
New holland t8050 tractor service repair manualujdjfjkskmdm
This document provides a service manual for tractor models T8010 through T8050. It describes the primary hydraulic power system, including the three hydraulic pumps that are driven by the transmission. A pressure and flow compensating piston pump supplies hydraulic flow to priority valves and then to steering, remote valves, and the three point hitch. A dual gear pump has front and rear sections, with the front supplying regulated pressure and the rear providing charge flow to the piston pump. An optional high flow piston pump is also described that provides increased hydraulic flow.
New holland t6070 range command tractor service repair manualujdjfjkskmdm
This document is a service manual that provides technical information on the hydraulic, pneumatic, electrical, and electronic systems of various tractor models. It contains sections covering the primary and secondary hydraulic power systems, pneumatic system, electrical power system, electronic systems, engines, transmissions, axles, brakes, steering, frames, hitches, and more. The manual aims to help technicians and mechanics resolve customer issues by providing detailed specifications, functional descriptions, diagnostic codes, and service/repair instructions for components.
New holland t9.530 tractor service repair manualujdjfjkskmdm
This service manual provides information for servicing the engines, fuel systems, air intake systems, cooling systems, exhaust systems, and other components of various tractor models. It includes specifications, maintenance procedures, and troubleshooting information to assist technicians in repairing components. The manual is intended to be used by qualified dealership personnel when performing maintenance and repairs.
New holland kobelco e230 csr crawler excavator service repair manualujdjfjkskmdm
This document is an introduction to a service manual for crawler excavators. It provides information for technicians on maintaining and repairing the machine. It emphasizes safety precautions that must be followed when working on the equipment, such as ensuring all pressure is relieved from systems before disconnecting lines and lowering attachments to the ground. It also provides contact information for the manufacturer and lists additional references for technicians.
New holland e260 csr crawler excavator service repair manualujdjfjkskmdm
This service manual provides safety information and instructions for servicing an E260CSR Crawler Excavator. It outlines various hazards involved in maintenance work and recommends precautions like wearing protective equipment, lowering attachments, relieving pressures, and using proper lifting techniques. The manual explains that safe and proper service as recommended is important to avoid injuries from accidents.
New holland e215 c evo tier 3 crawler excavator (lc version) service repair m...ujdjfjkskmdm
The document is a service manual that provides specifications and maintenance information for the engine of a CNH Industrial Italia S.p.A. E215C EVO crawler excavator. It includes sections on the engine and crankcase, cooling system, electrical system, and identification/view of engine components. The manual provides detailed technical data, diagrams, and descriptions to guide servicing and repair work on the excavator engine.
New holland e175 c evo tier 3 crawler excavator service repair manualujdjfjkskmdm
This document is a service manual for the E175C EVO Crawler Excavator. It contains information on servicing and repairing various systems of the excavator including the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, and other components. The manual provides part numbers and instructions for maintenance and repairs. It is intended to be used by qualified dealership personnel for servicing the excavator.
New holland e160 c blade runner crawler excavator service repair manualujdjfjkskmdm
This document is a service manual for an E160C Blade Runner crawler excavator. It provides general safety information for operating and maintaining the excavator. Some key points include: reading the entire manual before working on the excavator, wearing proper protective equipment, lowering attachments to the ground before working, using lifting equipment properly, and taking caution with hot or high pressure parts. The manual outlines safety precautions to prevent injury or death while servicing the excavator.
New holland e60 c cab tier iv (final engine) mini excavator service repair ma...ujdjfjkskmdm
This document is a service manual for an E60C Mini Excavator. It contains over 200 sections organized by system (e.g. engine, hydraulic systems, electrical systems) providing repair and maintenance instructions. Each section includes part numbers and diagrams. The introduction emphasizes that only qualified dealership personnel should perform repairs following the procedures precisely and using recommended tools. It defines signal words for safety alerts and stresses reading all safety messages before operating or servicing the equipment.
New holland e37 c cab tier iv final engine mini excavator service repair manualujdjfjkskmdm
This service manual provides information on servicing an E37C mini excavator with a Tier IV final engine. It contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. Safety precautions are provided to ensure personal safety during maintenance and repair.
New holland e18 c canopy tier iv engine mini excavator service repair manualujdjfjkskmdm
This service manual provides information on servicing the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, dozer blade and arm, platform, cab, bodywork, and decals for the E18C Mini Excavator. The manual includes sections on safety, the engine, hydraulic systems, electrical systems, and various mechanical components of the excavator.
New holland boomer 20 compact tractor service repair manualujdjfjkskmdm
This service manual provides technical information for servicing the Boomer 20 and 25 compact tractors. It includes sections on the engine, transmission, axles, brakes, hydraulics, hitches, steering, wheels, electrical systems, and operator platform. The manual should be used along with the operator's manual and only by qualified dealership personnel when performing repairs or maintenance according to the instructions and using recommended tools.
Hyster d005 (h60 e europe) forklift service repair manualujdjfjkskmdm
The document provides instructions for servicing GM engines, including the 4-153, 4-181, 3.0L, and 6-250 models. It describes procedures for removing and installing the cylinder head, disassembling and cleaning the cylinder head components, inspecting valves and guides, and reassembling the cylinder head. Safety warnings are provided regarding hazardous fibers in gaskets and precautions for working on electrical components. Diagrams show the engine block configuration and tools for tasks like cleaning valve guides.
Hyster c008 (h470 c 36) forklift service repair manualujdjfjkskmdm
1) Gear pumps come in single stage or tandem designs and work by using rotating gears to move oil from an inlet port to an outlet port. Seals are used to prevent leaks between sections.
2) As pressure increases, devices keep the clearance between gears at a minimum to prevent leakage while still allowing for lubrication and minimizing wear.
3) When the drive gear turns, it engages with the driven gear, moving oil from the inlet chamber around the pumping chamber and out the outlet chamber. Lubrication is provided to gears and bearings from outlet oil.
Hyster b214 (h500 hd ec) forklift service repair manualujdjfjkskmdm
1. The document provides repair procedures for the frame and connected parts of various lift truck models, including the frame, counterweight, covers, floor plates, handrails, steps, hydraulic tank, and fuel tank.
2. The counterweight repair section describes how to remove and install the main counterweight, which weighs between 6,000kg and 8,450kg depending on the lift truck model.
3. The hydraulic tank repair section outlines how to remove and install the 153kg hydraulic tank, which contains 321 liters of hydraulic oil and requires draining the oil before removal.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. 0-2
GENERAL SAFETY INFORMATION
Do not operate or perform any maintenance on this
machine until all instructions found in the OPERA-
TOR’S MANUAL and this MANUAL have been thor-
oughly read and understood.
Improper operation or maintenance of this machine
may cause accidents and could result in serious in-
jury or death.
Always keep the manual in storage.
If it is missing or damaged, place an order with an
authorized our Distributor for a replacement.
If you have any questions, please consult an autho-
rized our Distributor.
(1) Most accidents, which occur during operation, are
due to neglect of precautionary measures and safe-
ty rules. Sufficient care should be taken to avoid
these accidents. Erroneous operation, lubrication
or maintenance services are very dangerous and
may cause injury or death of personnel. Therefore
all precautionary measures, NOTES, DANGERS,
WARNINGS and CAUTIONS contained in the man-
ual and on the machine should be read and under-
stood by all personnel before starting any work with
or on the machine.
(2) Operation, inspection, and maintenance should be
carefully carried out, and safety must be given the
first priority. Messages of safety are indicated with
marks. The safety information contained in the
manual is intended only to supplement safety
codes, insurance requirements, local laws, rules
and regulations.
(3) Messages of safety appear in the manual and on
the machine : All messages of safety are identified
by either word of "DANGER", "WARNING" and
"CAUTION".
1) DANGER- Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury and is represented as
follows:
2) WARNING- Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury and is represented as
follows:
3) CAUTION- Indicates a potentially hazardous
situation which, if not avoided, may result in mi-
nor or moderate injury. It may also be used to
alert against possible damage to the machine
and its components and is represented as fol-
lows:
(4) It is very difficult to forecast every danger that may
occur during operation. However, safety can be en-
sured by fully understanding proper operating pro-
cedures for this machine according to methods
recommended by Manufacturer.
(5) While operating the machine, be sure to perform
work with great care, so as not to damage the ma-
chine, or allow accidents to occur.
(6) Continue studying the manual until all Safety, Oper-
ation and Maintenance procedures are completely
understood by all persons working with the ma-
chine.
3. 0-3
SAFETY PRECAUTIONS
The proper and safe lubrication and maintenance
for this machine, recommended by Manufacturer,
are outlined in the OPERATOR’S MANUAL for the
machine.
Improper performance of lubrication or mainte-
nance procedures are dangerous and could result
in injury or death. Read and understand the MAN-
UAL before performing any lubrication or mainte-
nance.
The serviceman or mechanic may be unfamiliar with
many of the systems on this machine. This makes it
important to use caution when performing service work.
A knowledge of the system and or components is im-
portant before the removal or disassembly of any com-
ponent.
Because of the size of some of the machine compo-
nents, the serviceman or mechanic should check the
weights noted in this manual. Use proper lifting proce-
dures when removing any components. Weight of com-
ponents table is shown in the section ;
SPECIFICATIONS.
The following is a list of basic precautions that must al-
ways be observed.
(1) Read and understand all Warning plates and decal
on the machine before Operating, Maintaining or
Repairing this machine.
(2) Always wear protective glasses and protective
shoes when working around machines. In particu-
lar, wear protective glasses when using hammers,
punches or drifts on any part of the machine or at-
tachments. Use welders gloves, hood/goggles,
apron and the protective clothing appropriate to the
welding job being performed. Do not wear loose fit-
ting or torn clothing. Remove all rings from fingers,
loose jewelry, confine long hair and loose clothing
before working on this machinery.
(3) Disconnect the battery and hang a "Do Not Oper-
ate" tag in the Operators Compartment. Remove ig-
nition keys.
(4) If possible, make all repairs with the machine
parked on a firm level surface. Block the machine
so it does not roll while working on or under the ma-
chine. Hang a "Do Not Operate" tag in the Opera-
tors Compartment.
(5) Do not work on any machine that is supported only
by lift, jacks or a hoist. Always use blocks or jack
stands, capable of supporting the machine, before
performing any disassembly.
Do not operate this machine unless you have
read and understand the instructions in the OP-
ERATOR’S MANUAL. Improper machine opera-
tion is dangerous and could result in injury or
death.
(6) Relieve all pressure in air, oil or water systems be-
fore any lines, fittings or related items are discon-
nected or removed. Always make sure all raised
components are blocked correctly and be alert for
possible pressure when disconnecting any device
from a system that utilizes pressure.
(7) Lower the bucket, dozer, or other attachments to
the ground before performing any work on the ma-
chine. If this cannot be done, make sure the bucket,
dozer, ripper or other attachment is blocked correct-
ly to prevent it from dropping unexpectedly.
(8) Use steps and grab handles when mounting or dis-
mounting a machine. Clean any mud or debris from
steps, walkways or work platforms before using.
Always face to the machine when using steps, lad-
ders and walkways. When it is not possible to use
the designed access system, provide ladders, scaf-
folds, or work platforms to perform safe repair oper-
ations.
(9) To avoid back injury, use a hoist when lifting com-
ponents which weigh 20kg (45lbs) or more. Make
sure all chains, hooks, slings, etc., are in good con-
dition and are the correct capacity. Be sure hooks
are positioned correctly. Lifting eyes are not to be
side loaded during a lifting operation.
(10)To avoid burns, be alert for hot parts on machines
which have just been stopped and hot fluids in
lines, tubes and compartments.
(11)Be careful when removing cover plates. Gradually
back off the last two capscrews or nuts located at
opposite ends of the cover or device and carefully
pry cover loose to relieve any spring or other pres-
sure, before removing the last two capscrews or
nuts completely.
(12)Be careful when removing filler caps, breathers and
plugs on the machine. Hold a rag over the cap or
plug to prevent being sprayed or splashed by liq-
uids under pressure. The danger is even greater if
the machine has just been stopped because fluids
can be hot.
4. 0-4
(13)Always use the proper tools that are in good condi-
tion and that are suited for the job at hand. Be sure
you understand how to use them before performing
any service work.
(14)Reinstall all fasteners with the same part number.
Do not use a lesser quality fastener if replacements
are necessary.
(15)Repairs which require welding should be per-
formed only with the benefit of the appropriate ref-
erence information and by personnel adequately
trained and knowledgeable in welding procedures.
Determine type of metal being welded and select
correct welding procedure and electrodes, rods or
wire to provide a weld metal strength equivalent at
least to that of the parent metal. Make sure to dis-
connect battery before any welding procedures are
attempted.
(16)Do not damage wiring during removal operations.
Reinstall the wiring so it is not damaged nor will be
damaged in operation of the machine by contacting
sharp corners, or by rubbing against some object or
hot surface. Do not connect wiring to a line contain-
ing fluid.
(17)Be sure all protective devices including guards and
shields are properly installed and functioning cor-
rectly before starting a repair. If a guard or shield
must be removed to perform the repair work, use
extra caution and replace the guard or shield after
repair is completed.
(18)The maintenance and repair work while holding the
bucket raised is dangerous due to the possibility of
a falling attachment. Don’t fail to lower the attach-
ment and place the bucket to the ground before
starting the work.
(19)Loose or damaged fuel, lubricant and hydraulic
lines, tubes and hoses can cause fires. Do not bend
or strike high pressure lines or install ones which
have been bent or damaged. Inspect lines, tubes
and hoses carefully. Do not check for leaks with
your hands. Very small (pinhole) leaks can result in
a high velocity oil stream that will be invisible close
to the hose. This oil can penetrate the skin and
cause personal injury. Use card-board or paper to
locate pinhole leaks.
(20)Tighten connections to the correct torque. Make
sure that all heat shields, clamps and guards are in-
stalled correctly to avoid excessive heat, vibration
or rubbing against other parts during operation.
Shields that protect against oil spray onto hot ex-
haust components in event of a line, tube or seal
failure must be installed correctly.
(21)Do not operate a machine if any rotating part is
damaged or contacts any other part during opera-
tion. Any high speed rotating component that has
been damaged or altered should be checked for
balance before reusing.
(22)Be careful when servicing or separating the tracks
(crawlers). Chips can fly when removing or install-
ing a track (crawlers) pin. Wear safety glasses and
long sleeve protective clothing. Tracks (crawlers)
can unroll very quickly when separated. Keep away
from front and rear of machine. The machine can
move unexpectedly when both tracks (crawlers)
are disengaged from the sprockets. Block the ma-
chine to prevent it from moving.
5. 0-5
Index
No.
Title
NHK Turkey
YN11-45001~
YQ11-06001~
STANDARD MAINTENANCE TIME SCHEDULE
MAINTENANCE STANDARD AND TEST PROCEDURE
MECHATRO CONTROL SYSTEM
DISASSEMBLING & ASSEMBLING
2
1
3
11
12
13
21
22
23
24
25
31
32
33
34
46
47
48
51
OUTLINE
SPECIFICATIONS
ATTACHMENT DIMENSIONS
TOOLS
HYDRAULIC SYSTEM
ELECTRIC SYSTEM
COMPONENTS SYSTEM
AIR-CONDITIONER SYSTEM
ATTACHMENT
UPPER STRUCTURE
TRAVEL SYSTEM
BY ERROR CODES
BY TROUBLE
TROUBLE DIAGNOSIS MODE
ENGINE
APPLICABLE MACHINES
SPECIFICATIONSMAINTENANCESYSTEMDISASSEMBLINGTROUBLESHOOTINGE/G
INDEX E215BJ
6. 0-6
NOTE:
This Manual is prepared as a technical material in
which the information necessary for the maintenance
and repairing services of our hydraulic excavators are
collected, and is categorized into 7 Chapters, Specifica-
tion, Maintenance, System, Disassembly, Trouble-
shooting, Engine, and Installation Procedures for
Optional Attachment.
• The Chapter "Specification" describes the specifi-
cations for entire machine and material, which are
instructive for replacement and repairing of attach-
ments.
• The Chapter "Maintenance" describes the material,
which is helpful for maintenance service and adjust-
ments for entire machine.
• The Chapter "System" describes the operating sys-
tem like hydraulic system, electric system, compo-
nents, and so on.
• The Chapter "Disassembly" describes the removal
and installing of assembly mounted on the upper
structure and undercarriage, and the assembling
and disassembling of the associated hydraulic
equipment.
• The Chapter "Troubleshooting" describes how to
find the fault equipment.
• The Chapter "Engine" describes the engines mak-
ing use of the "Maintenance Manual" provided by
the suppliers.
• The Chapter "Installation Procedures for Optional
Attachment" describes the supplements added on
request as required.
This Manual may be properly revised due to the im-
provement of products, modification of specifications,
etc. And there are cases where the system on actual
machine and a part of the contents of this manual may
differ due to the variations of specification by countries.
For the section in which the description is hardly under-
stood, contact our distributor.
The number is assigned to every part handled in this
Manual on account of the description, but the parts,
which cannot be supplied as service parts are con-
tained. Therefore, the order must be placed with re-
spective formal number with due confirmation on the
Parts Manual for applicable machine.
7. 1-1
1
1. OUTLINE
TABLE OF CONTENTS
1.1 GENERAL PRECAUTIONS FOR MAKING REPAIRS ......................................................1-3
1.1.1 PREPARATION BEFORE DISASSEMBLING..........................................................1-3
1.1.2 SAFETY WHEN DISASSEMBLING AND ASSEMBLING ........................................1-3
1.1.3 DISASSEMBLING AND ASSEMBLING HYDRAULIC EQUIPMENT .......................1-3
1.1.4 ELECTRICAL EQUIPMENT .....................................................................................1-4
1.1.5 HYDRAULIC PARTS ................................................................................................1-5
1.1.6 WELD REPAIR .........................................................................................................1-5
1.1.7 ENVIRONMENTAL ISSUES.....................................................................................1-5
1.2 INTERNATIONAL UNIT SYSTEM .....................................................................................1-6
9. 1. OUTLINE
1-3
1.1 GENERAL PRECAUTIONS FOR
MAKING REPAIRS
1.1.1 PREPARATION BEFORE
DISASSEMBLING
(1) Knowledge of operating procedure
Read Operator’s Manual carefully to understand
the operating procedure.
(2) Cleaning machines
Clean machines of soil, mud, and dust before
carrying into the service shop.
Carrying a soiled machine into the service shop,
causes making less efficient work and damage of
parts.
(3) Inspecting machines
Confirm the disassembling section before starting
work, determine the disassembly procedure taking
the conditions in work shop into account, and
request to procure necessary parts in advance.
(4) Recording
Record the following items to keep contact and
prevent malfunction from recurring.
1) Inspecting date, place
2) Model name, Serial number and Record on
hour meter
3) Trouble condition, place, cause
4) Visible oil leak, water leak and damage
5) Clogging of filters, oil level, oil quality, oil
contamination and looseness.
6) Examine the problems on the basis of monthly
operation rate with the last inspection date and
records on hour meter.
(5) Arrangement and cleaning in service shop
1) Tools required for repair work.
2) Prepare the places to put the disassembled
parts.
3) Prepare oil pans for leaking oil, etc.
1.1.2 SAFETY WHEN DISASSEMBLING AND
ASSEMBLING
(1) Safety
1) Wear appropriate clothing, safety shoes, safety
helmet, goggles, and clothes with long sleeves.
2) Attach "Don’t operate" tag to control lever, and
begin a meeting before starting the work.
3) Before starting inspection and maintenance
stop the engine.
4) Confirm the position of first-aid kit and fire
extinguisher, and also where to make contact
for emergency measure and ambulance to
prepare for accidents and fire.
5) Choose a hard, lever and safe place, and put
attachment on the ground without fail.
6) Use hoist, etc. to remove parts of heavy weight
(23kg [50 lb] or more).
7) Use proper tools, and change or repair
defective tools.
8) Machine and attachment required to work in the
lifting condition should be supported with
supports or blocks securely.
1.1.3 DISASSEMBLING AND ASSEMBLING
HYDRAULIC EQUIPMENT
(1) Removing hydraulic equipment assy
1) Before removing pipes, release the pressure of
hydraulic oil tank, or open the cover on the
return side to tank, and take out the filter.
2) Drain the oil in the removed pipes into pan to
prevent the oil from spilling on the ground.
3) Pipes with plugs or caps to prevent oil leaking,
entry of dust, etc.
4) Clean the outside surface of equipment, etc.
before disassembling, and drain hydraulic oil
and gear oil before putting them on working
bench.
(2) Disassembling hydraulic equipment
1) Since performance and function of hydraulic
equipment after disassembly and assembly
results in immunity from responsibility on the
manufacture’s side, disassembly, assembly
and modification without permission are strictly
prohibited.
2) If it is unavoidably necessary to disassemble
and modify, it should be carried out by experts
or personnel qualified through service training.
3) Make match mark on parts for reassembling.
4) Before disassembling, read Disassembling
Instruction in advance, and determine if the
disassembly and assembly are permitted or
not.
Read Operator's Manual
before disassembling
WARNING
10. 1. OUTLINE
1-4
5) For parts which are required to use jig and
tools, don’t fail to use the specified jig and tools.
6) For parts which can not be removed in the
specified procedure, never force removal. First
check for the cause.
7) The removed parts should be put in order and
tagged so as to install on proper places without
confusion.
8) For common parts, pay attention to the quantity
and places.
(3) Inspecting parts
1) Check that the disassembled parts are free
from adherence, interference and uneven
working face.
2) Measure the wear of parts and clearance, and
record the measured values.
3) If an abnormality is detected, repair or replace
the parts.
(4) Reassembling hydraulic equipment
1) During the parts cleaning, ventilate the room.
2) Before assembly, clean parts roughly first, and
then completely.
3) Remove adhering oil by compressed air, and
apply hydraulic oil or gear oil, and then
assemble them.
4) Replace the removed O-ring, back-up rings and
oil seal with new ones, and apply grease oil on
them before assembling.
5) Removes dirt and water on the surface on
which liquid sealant are applied, decrease
them, and apply liquid sealant on them.
6) Before assembling, remove rust preventives on
new parts.
7) Use special tools to fit bearings, bushing and oil
seal.
8) Assemble parts matching to the marks.
9) After completion, check that there is no
omission of parts.
(5) Installing hydraulic equipment
1) Confirm hydraulic oil and lubrication oil.
2) Air release is required in the following cases ;
1. Change of hydraulic oil
2. Replacement of parts on suction pipe side
3. Removing and attaching hydraulic pump
4. Removing and attaching swing motor
5. Removing and attaching travel motor
6. Removing and attaching hydraulic cylinder
If hydraulic oil and lubricating oil are not
filled and also air bleed is not performed,
the hydraulic equipment may be damaged.
3) For air bleed of hydraulic pump and swing
motor, loosen drain plug on the upper part, start
engine, and run in low idling, then bleed air until
hydraulic oil is comes out. After completion of
comes, tighten plug securely.
4) For air bleed of travel motor and hydraulic
cylinder, starts engine and operate it for 10
minutes or more at no-load and low speed.
For cylinder, don’t move it to the stroke end
at beginning.
5) Air in pilot circuit can be bleed out by only
operating digging, swing and traveling motions
thoroughly.
6) Check hydraulic oil level.
Move attachments to hydraulic oil check
position, and check hydraulic oil level of tank.
Refill oil if the oil level is lower than the specified
level.
How to check oil level of hydraulic oil tank
1.1.4 ELECTRICAL EQUIPMENT
(1) The disassembly of electrical equipment is not
allowed.
(2) Handle equipment with care so as not to drop it or
bump it.
(3) Connector should be removed by unlocking while
holding the connector.
Never stress in tension to the caulked section by
pulling wire.
(4) Check that connector is connected and locked
completely.
(5) Engine key off before removing and connecting
connector.
LEVEL GAUGE
Oil level of hydraulic oil tank.
If the indicator is within
level marks, the oil quantity
is acceptable.
11. 1. OUTLINE
1-5
(6) Engine key off before touching terminals of starter
and alternator.
(7) Remove battery grounding terminal before
beginning work close to battery and battery relay
with tools.
(8) Wash machine with care so as not to splash water
on electrical equipment and connector.
(9) When water has entered in the waterproofed
connector, the removing of water is not easy. So
check the removed waterproofed connector with
care to protect it from entry of water. If moisture
adheres on it, dry it completely before connecting.
Battery fluid is dangerous.
The battery fluid is dilute sulfuric acid, and causes
scald and loss of eyesight by adhering on eyes,
skin and clothes. When the fluid has adhered on
them, take an emergency measure immediately and
see a doctor for medical advice.
• When it has adhered on skin ;
Wash with soap and water.
• When it has got in eyes ;
Wash in water for 10 minutes or more
immediately.
• When it has spilled out in large quantity ;
Use sodium bicarbonate to neutralize, or wash
away with water.
• When it was swallowed ;
Drink milk or water.
• When it has adhered on clothes ;
Wash it immediately.
1.1.5 HYDRAULIC PARTS
(1) O-ring
• Check that O-ring is free from flaw and has
elasticity before fitting.
• Even if the size of O-ring is equal, the usage
differs, for example in dynamic and static
sections, the rubber hardness also differs
according to the pressure force, and also the
quality differs depending on the materials to be
seated. So, choose proper O-ring.
• Fit O-ring so as to be free from distortion and
bend.
• Floating seal should be put in pairs.
(2) Flexible hose (F hose)
• Even if the connector and length of hose are the
same, the parts differ according to the
withstanding pressure. Use proper parts.
• Tighten it to the specified torque, and check that
it is free from twist, over tension, interference,
and oil leak.
1.1.6 WELD REPAIR
(1) The weld repair should be carried out by qualified
personnel in the specified procedure after
disconnecting the grounding cable of battery. If the
grounding cable is not disconnected, the electrical
equipment may be damaged.
(2) Remove parts which may cause fire due to the
entry of spark beforehand.
(3) Repair attachments which are damaged, giving
particular attention to the plated section of piston
rod to protect it from sparks, and don’t fail to cover
the section with flame-proof clothes.
1.1.7 ENVIRONMENTAL ISSUES
(1) Engine should be started and operated in the place
where air can be sufficiently ventilated.
(2) Waste disposal
The following parts follows the regulation.
Waste oil, waste container and battery
(3) Precautions for handling hydraulic oil
Hydraulic oil may cause inflammation of eyes.
Wear goggles to protect eyes on handling it.
• When it has got in eyes ;
Wash eyes with water until the stimulus is gone.
• When it was swallowed ;
Don’t force him to vomit it, but immediately
receive medical treatment.
• When it has adhered on skin ;
Wash with soap and water.
(4) Others
For spare parts, grease and oil, use NEW
HOLLAND KOBELCO genuine ones.
12. 1. OUTLINE
1-6
1.2 INTERNATIONAL UNIT SYSTEM
Introduction
Although this manual uses the SI units system. Outline
of SI units system is described here.
Given hereinunder are an excerpt of the units that are
related to this manual :
1. Etymology of SI Units
English : International System of units
2. Construction of SI Unit System
(1) Basic Units
(2) Supplementary Units
(3) Derived Units of Basic Units
(4) Derived Units bearing Peculiar Designations
(5) Prefixes of SI
Table1-1
QUANTITIES DESIGNATION SIGN
Length
Mass
Time
Current
Thermodynamic
temperature
Gram molecule
Luminous intensity
Meter
Kilogram
Second
Ampere
Kelvin
Mol
Candela
m
kg
s
A
K
mol
cd
Table1-2
QUANTITIES DESIGNATION SIGN
Plain angle
Solid angle
Radian
Steradian
rad
sr
Table1-3
QUANTITIES DESIGNATION SIGN
Area
Volume
Velocity
Acceleration
Density
Square meter
Cubic meter
Meter per second
Meter per second / second
Kilogram per cubic meter
m2
m3
m/s
m/s2
kg/m3
SI unit
system
Prefixes of SI
(n-th power of 10, where n is an integer)
Table 1- 5
SI units
Base units
Table 1-1
Supplemen
tary units
Table 1-2
Derived units
of base units
Table 1-3
Derived units
bearing peculiar
designations
Table 1-4
Derived
units
Table1-4
QUANTITY UNIT SYMBOL FORMULA
Frequency hertz Hz 1Hz=1/s
Force newton N kg • m/s 2
Pressure and
Stress
pascal Pa N/m2
Energy, Work
and Quantity of
heat
joule J N•m
Power watt W J/s
Quantity of
electricity
coulomb C A•s
Electric
potential
difference,
Voltage, and
Electromotive
force
volt V W/A
Quantity of
static electricity
and Electric
capacitance
farad F C/V
Electric
resistance
ohm V/A
Celcius
temperature
celcius
degree or
degree
°C (t+273.15)K
Illuminance lux lx l m/m2
Table1-5
PREFIX
POWER
DESIGNATION SIGN
Giga G 109
Mega M 106
Kilo k 103
Hecto h 102
Deca da 10
Deci d 10–1
Centi c 10–2
Milli m 10–3
Micro 10–6
Nano n 10–9
Pico p 10–12
13. 1. OUTLINE
1-7
(6) Unit Conversion Table
QUANTITIES JIS SI REMARKS
Mass kg kg
Force kgf N 1kgf=9.807N
Torque kgf•m N•m 1kgf•m=9.807N•m
Pressure kgf/cm2 MPa 1kgf/cm2=0.098MPa
Motive power PS kW 1PS=0.7355kW
Revolution r.p.m min–1 1r.p.m=1min–1
14. 2-1
2
2. SPECIFICATIONS
TABLE OF CONTENTS
2.1 NAME OF COMPONENTS................................................................................................2-3
2.2 GENERAL DIMENSIONS ..................................................................................................2-4
2.2.1 E215BJ/E215BJLC
[5.65m (18ft-6in) Boom+2.94m (9ft-8in) Standard Arm+0.80m3 (1.05cu•yd) Bucket Shoe]....2-4
2.2.2 E215BJ/E215BJLC
[5.65m (18ft-6in)+2.4m (7ft-10in) Short Arm+0.93m3
(1.22cu•yd) Bucket Shoe]......2-4
2.2.3 E215BJ/E215BJLC
[5.65m (18ft-6in) Boom+3.5m (11ft-6in) Long Arm+0.70m3 (0.92cu•yd) Bucket Shoe]..........2-5
2.3 WEIGHT OF COMPONENTS............................................................................................2-6
2.4 TRANSPOTATION ............................................................................................................2-8
2.4.1 OVERALL DIMENSIONS OF MACHINE ON A TRAILER........................................2-8
2.4.2 DIMENSIONS OF ATTACHMENT ...........................................................................2-9
2.5 SPECIFICATIONS AND PERFORMANCE .......................................................................2-11
2.5.1 SPEED AND CLIMBING CAPABILITY.....................................................................2-11
2.5.2 ENGINE ....................................................................................................................2-11
2.5.3 HYDRAULIC COMPONENTS ..................................................................................2-11
2.5.4 WEIGHT ...................................................................................................................2-11
2.6 TYPE OF CRAWLER.........................................................................................................2-12
2.7 TYPE OF BUCKET............................................................................................................2-12
2.8 COMBINATIONS OF ATTACHMENT................................................................................2-13
2.9 ENGINE SPECIFICATIONS ..............................................................................................2-14
2.9.1 SPECIFICATIONS....................................................................................................2-14
2.9.2 ENGINE CHARACTERISTIC CURVE (HINO J05E-TA) ..........................................2-15
15. 2. SPECIFICATIONS
2-2
Issue Date of Issue Applicable Machines Remarks
First edition August, 2008
E215BJ : YN11-45001~
E215BJLC : YQ11-06001~
(NHK Turkey)
16. 2. SPECIFICATIONS
2-3
2.1 NAME OF COMPONENTS
BUCKET
CYLINDER
ARM CYLINDER
MONITOR PANEL
BATTERY
CAB
HYDRAULIC TANK
GUARD
MUFFLER
FUEL TANK
CONTROL VALVE
SLEWING MOTOR
HYDRAULIC
PUMP
SHOE AND TRACK LINK
COUNTER WEIGHT
ENGINE
RADIATOR AND OIL COOLER
TRAVEL MOTOR
SLEWING BEARING
SWIVEL
JOINT
UPPER ROLLER
LOWER ROLLER
TRACK GUIDE
ROTALY MULTI CONTROL VALVE
(OPTION)
IDLER ADJUST
AIR CLEANER
FRONT IDLER
BUCKET
BUCKET LINK
BOOM
BOOM CYLINDER
ARM
IDLER LINK
17. 2. SPECIFICATIONS
2-4
2.2 GENERAL DIMENSIONS
2.2.1 E215BJ/E215BJLC [5.65m (18ft-6in) Boom+2.94m (9ft-8in) Standard Arm+0.80m3 (1.05cu•yd)
Bucket Shoe]
Dimensions marked * do not include the height of the shoe lug.
[ ] include LC specifications.
2.2.2 E215BJ/E215BJLC [5.65m (18ft-6in)+2.4m (7ft-10in) Short Arm+0.93m3
(1.22cu•yd) Bucket Shoe]
Unit : mm(ft-in)
9450 (31')
2800 (9'2")
4170 (13'8") [4450 (14'7")]
2710(8'11")
3030(9'11")
2980(9'9")
*1060
(3'6")
450
(17.1")
1315(4'4")
43(1.7")
1395(4'7")
4840 (15'11") [4980 (16'4")] [2990] (9'10")
2750 (9')
R2750
(9')
600 (23.6")
Unit : mm(ft-in)9530 (31'3")
3980 (13'1")
2750 (9')
4170 (13'8") [4450 (14'7")]
4840 (15'11") [4980 (16'4")]
3160(10'4")
*1060(3'6")
18. 2. SPECIFICATIONS
2-5
2.2.3 E215BJ/E215BJLC [5.65m (18ft-6in) Boom+3.5m (11ft-6in) Long Arm+0.70m3 (0.92cu•yd) Bucket
Shoe]
Dimensions marked * do not include the height of the shoe lug.
[ ] include LC specifications.
Unit : mm(ft-in)9520 (31'3")
2750 (9')
4170 (13'8") [4450 (14'7")]
4840 (15'11") [4980 (16'4")]
3180(10'5")
*1060(3'6")
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 2. SPECIFICATIONS
2-6
2.3 WEIGHT OF COMPONENTS
Unit ; kg (lb)
Model
E215BJ E215BJLC
Item
Machine complete 20,200 (44,500) 20,600 (45,400)
1. Upper frame assy (Assembly of following :) 9,500 (21,000)
1.1 Upper frame 1,770 (3,900)
1.2 Counter weight (Semi-weighted) 4,640 (10,230)
1.3 Cab 260 (570)
1.4 Engine *540 (1,190)
1.5 Hydraulic oil tank *150 (330)
1.6 Fuel tank *110 (240)
1.7 Slewing motor (including reduction unit) *210 (460)
1.8 Control valve *230 (510)
1.9 Boom cylinder *170 (375) 2
1.10 Pin (for mounting boom) 70 (150)
1.11 Pump *130 (290)
1.12 Radiator (including intercooler) *90 (200)
2. Lower frame assy (Assembly of following :) 6,730 (14,840) 7,130 (15,720)
2.1 Lower frame 2,260 (4,980) 2,420 (5,340)
2.2 Slewing bearing 250 (550)
2.3 Travel motor (including reduction unit) 260 (570) 2
2.4 Upper roller 20 (44) 2
2.5 Lower roller 30 (66) 14 30 (66) 16
2.6 Front idler 110 (240) 2
2.7 Idler adjuster 100 (220) 2
2.8 Sprocket 50 (110) 2
2.9 Swivel joint *30 (66)
2.10 Track link with 600mm (23.6in) shoes assy
Track link with 700mm (27.6in) shoes assy
Track link with 800mm (31.5in) shoes assy
1,260 (2,780) 2
1,470 (3,240) 2
1,600 (3,530) 2
1,350 (2,980) 2
1,560 (3,440) 2
1,700 (3,750) 2
2.10.1 Track link assy 510 (1,120) 2 540 (1,190) 2
3. Attachment (Assembly of following / STD :) 3,420 (7,540)
{5.65m (18ft-6in) Boom + 2.94m (9ft-8in) Arm + 0.80m3
(1cu•yd) Bucket}
3.1 Bucket assy (STD) 640 (1,410)
3.2 STD Arm assy (Assembly of following :) 1,050 (2,315)
3.2.1 STD Arm 660 (1,455)
3.2.2 Bucket cylinder *140 (310)
3.2.3 Idler link 20 (44) 2
3.2.4 Bucket link 90 (198)
3.2.5 Pin (2pcs. for mounting bucket cylinder / 2pcs. for mounting bucket) 100 (220)
3.3 Boom assy (Assembly of following :) 1,730 (3,815)
3.3.1 Boom 1,310 (2,890)
3.3.2 Arm cylinder *255 (560)
3.3.3 Pin (Mounting arm • Mounting arm cylinder) 80 (180)
21. 2. SPECIFICATIONS
2-7
Marks * show dry weight.
4. Lubricant and water (Assembly of following :) 550 (1,210)
4.1 Hydraulic oil 200 (440)
4.2 Engine oil 20 (44)
4.3 Fuel 310 (680)
4.4 Water 20 (44)
Unit ; kg (lb)
Model
E215BJ E215BJLC
Item
22. 2. SPECIFICATIONS
2-8
2.4 TRANSPOTATION
2.4.1 OVERALL DIMENSIONS OF MACHINE ON A TRAILER
(1) 5.65m (18ft-6in) Boom+2.94m (9ft-8in) Arm+0.80m3
(1.05cu•yd) Bucket
* marks indicate LC specifications.
Model
E215BJ E215BJLC
Item
Width 600mm (23.6in) shoes 2,800 (9ft-2in) 2,990 (9ft-10in)
Weight 20,200kg (44,500 lbs) 20,600kg (45,400 lbs)
SECTION AA
100
(3.94")
80
(3.15")
9470 (31'1") 2260 (7'5")
3080(10'1")
3780(12'5")
700
(27.6")
138 (5.43") [*145 (5.71")]
90 (3.54")
[*83 (3.27")]
72 (2.83")
[*54 (2.13")]
Unit : mm (ft-in)
23. 2. SPECIFICATIONS
2-9
2.4.2 DIMENSIONS OF ATTACHMENT
(1) BOOM
(2) ARM AND BUCKET
(3) Arm
Type
5.65m (18ft-6in) Boom
Item
Length Height Width
L H W
m (ft-in)
5.86 1.57 0.67
(19'3" 5'2" 2'2")
Weight kg (lbs) 1,670 (3,680)
Type 2.4m (7ft-10in) Arm +
0.93m 3(1.22cu•yd) Bucket
2.94m (9ft-8in) Arm +
0.80m 3 (1.05cu•yd) Bucket
3.5m (11ft-6in) Arm +
0.70m 3 (0.92cu•yd) Bucket
Item
Length Height Width
L H W
m (ft-in)
4.75 0.9 1.33
(15'7" 2'11" 4'4")
5.29 0.9 1.16
(17'4" 2'11" 4')
5.88 0.9 1.08
(19'3" 2'11" 3'7")
Weight kg (lbs) 1,740 (3,840) 1,680 (3,700) 1,880 (4,150)
Type
2.4 m (7ft-10in) Arm 2.94 m (9ft-8in) Arm 3.5 m (11ft-6in) Arm
Item
Length Height Width
L H W
m (ft-in)
3.40 0.86 0.56
(11'2" 2'10" 1'10")
3.94 0.86 0.56
(12'11" 2'10" 1'10")
4.53 0.87 0.56
(14'10" 2'10" 1'10")
Weight kg (lbs) 1,020 (2,250) 1,044 (2,300) 1,260 (2,780)
24. 2. SPECIFICATIONS
2-10
(4) Bucket
Type Hoe bucket
Length Height Width
L H W
m (ft-in
1.37 1.26 0.87
(4'6" 4'2" 2'10")
1.37 1.26 1.07
(4'6" 4'2" 3'6")
1.37 1.26 1.16
(4'6" 4'2" 3'10")
1.37 1.26 1.33
(4'6" 4'2" 4'4")
Weight kg (lbs) 520 (1,150) 630 (1,390) 640 (1,410) 710 (1,560)
Bucket capacity m3
cu•yd 0.51 (0.67) 0.70 (0.92) STD 0.80 (1.05) 0.93 (1.22)
Type Hoe bucket Slope finishing bucket
Length Height Width
L H W
m (ft-in
1.37 1.26 1.16
(4'6" 4'2" 3'10")
1.25 0.90 2.20
(4'1" 2'11" 7'3")
Weight kg (lbs) 750 (1,650) 890 (1,960)
Bucket capacity m3
cu•yd 0.80 (1.05) HD 0.82 (1.07)
Hoe bucket Slope finishing bucket
25. 2. SPECIFICATIONS
2-11
2.5 SPECIFICATIONS AND PERFORMANCE
2.5.1 SPEED AND CLIMBING CAPABILITY
2.5.2 ENGINE
2.5.3 HYDRAULIC COMPONENTS
2.5.4 WEIGHT
Item
Area & Model
E215BJ E215BJLC
Swing speed min-1
{rpm} 12.5 {12.5}
Travel speed (1-speed/2-
speed)
km/h (mile/h) 3.6 / 6.0 (2.2 / 3.7)
Gradeability % (degree) 70 (35)
Engine model HINO J05E-TA
Type
Water-cooled, 4 cycle 4 cylinder direct injection type diesel engine
with inter cooler turbo-charger
Number of cylinders—Bore Stroke
4 -ø112 mm 130 mm
(4.41 in 5.12 in)
Total displacement 5.123 L (312.61 cu•in)
Rated output / Engine speed 118 kW (160 PS) / 2,000 min-1
Maximum torque / Engine speed 592 N•m (437 lbf•ft)/ 1,600 min-1
Starter 24 V / 5.0kW
Alternator 24 V / 1.2kW
Hydraulic pump Variable displacement axial piston pump 2 + gear pump 1
Hydraulic motor (swing) Axial piston motor 1
Hydraulic motor (travel)
Variable displacement axial piston motor 2
(with counterbalance valve)
Control valve 8-spool control valve 1
Cylinder
(Boom, Arm, Bucket)
Double action cylinder
Oil cooler Air-cooled type
Unit : kg (lbs)
Fully equipped weight 20,200 (44,500) 20,600 (45,400)
Upper structure 9,500 (21,000)
Lower machinery
(600mm grouser shoe)
6,730 (14,840) 7,130 (15,720)
Attachment
3,420 (7,540)5.65m (18 ft-6in) Boom+2.94m (9ft-8in) Arm
+0.80m3
(1.05cu•yd) Bucket
26. 2. SPECIFICATIONS
2-12
2.6 TYPE OF CRAWLER
Use 600mm (23.6") grouser shoes on rough ground (areas covered with rocks and gravel). If you drive or excavate
with other shoes, this may cause shoe bending, shoe bolt looseness, and track assembly (link, roller, etc.)
2.7 TYPE OF BUCKET
Shape Shoe width mm (in)
Overall width of crawler
mm (ft-in)
Ground pressure kPa
(psi)
Grouser shoe
46 LINKS
600 (23.6)
STD 2,800 (9'2") 45 (6.53)
LC 2,990 (9'10") 43 (6.24)
700 (27.6)
STD 2,900 (9'6") 40 (5.80)
LC 3,090 (10'2") 38 (5.51)
800 (31.5)
STD 3,000 (9'10") 35 (5.08)
LC 3,190 (10'6") 33 (4.79)
Hoe bucket
Heaped
capacity
m3
(cu•yd)
Struck
m3
(cu•yd)
Outer width mm (ft-in)
Number
of tooth
W or W/O
side cutter
Availability
of face
shovel
Weight
kg (lbs)
With side
cutter
Without side
cutter
0.51 (0.67)
0.39
(0.51)
870 (2'10") 770 (2'6") 3 W YES
520
(1,150)
0.70 (0.92)
0.52
(0.68)
1,080 (3'6") 980 (3'3") 5 W YES
630
(1,390)
[STD]
0.80 (1.05)
0.59
(0.77)
1,160 (3'10") 1,060 (3'6") 5 W YES
640
(1,410)
0.93 (1.2)
0.67
(0.88)
1,330 (4'4") 1,230 (4') 5 W YES
710
(1,560)