The primary hydraulic power system uses a variable displacement pump to power the work hydraulics and steering. Oil is filtered and distributed to valves controlling header height, reel functions, and other components. It is linked to the hydrostatic system, sharing a reservoir and using hydrostatic return oil as charge pressure. Key components include the pump, filters, relief valves, and control valves.
New holland l221 tier 4 b (final) skid steer loader service repair manual [nh...fujsjefskekfksem
This document is a service manual for New Holland skid steer loaders and compact track loaders that meet Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper procedures and tools outlined in the manual.
New holland l228 tier 4 b (final) skid steer loader service repair manual [ng...fujsjefskekfksem
This document is a service manual for New Holland skid steer loaders and compact track loaders with Tier 4B engines. It contains over 150 sections covering the engine, power coupling, axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab and bodywork. The manual provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the specified tools and approved parts. The manufacturer is not responsible for damages caused by unapproved parts.
New holland d180 c tier 2 crawler dozer service repair manual (pin nedc18000 ...fujsjefskekfksem
This document is a service manual for a D180C crawler dozer. It provides specifications for different configurations of the D180C dozer for various markets and regions. For each product and market combination, it lists the corresponding engine used. The manual includes over 100 entries that pair specific D180C dozer configurations with their engine for different markets worldwide.
New holland d180 c tier 2 crawler dozer service repair manual (pin nddc18000 ...fujsjefskekfksem
This document is a service manual for a D180C crawler dozer. It provides specifications for different configurations of the D180C dozer for various global markets. For each product and market combination, it lists the corresponding engine used. The service manual contains detailed information on servicing and repairing the D180C dozer.
New holland d180 c bd tier 2 crawler dozer service repair manualfujsjefskekfksem
This service manual section provides instructions for removing and installing the engine on a D180C Crawler Dozer. The removal process involves detaching the engine from mounting brackets and lifting it away from the frame using lifting equipment. The installation involves cleaning threads, applying threadlock to bolts, and securing the engine flexible coupling to the flywheel before lowering the engine back into position on the frame. Proper lifting and installation are emphasized to prevent injury or damage.
New holland d150 c tier 2 crawler dozer service repair manual (pin nfdc15000 ...fujsjefskekfksem
This document is a service manual for D150C Crawler Dozers that provides information on maintenance and repair of engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, and electrical systems. It includes specifications for different product and engine combinations for various markets. The manual is intended to assist technicians in servicing and repairing components of the D150C dozers.
New holland d150 c tier 2 crawler dozer service repair manual (pin nedc15000 ...fujsjefskekfksem
This document is a service manual for D150C crawler dozers that provides information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, tools, and bodywork. It includes part numbers, safety rules, and instructions for servicing different components of the dozer.
New holland d125 c stage iiib crawler dozer service repair manual (pin nfdc12...fujsjefskekfksem
This document is a service manual for the D125C Crawler Dozer covering models with PIN numbers NDDC12500 and above, NEDC12500 and above, and NFDC12500 and above. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, climate control, electrical systems, blade, cab, and other components. Safety information is also included to prevent injury during maintenance and repair.
New holland l221 tier 4 b (final) skid steer loader service repair manual [nh...fujsjefskekfksem
This document is a service manual for New Holland skid steer loaders and compact track loaders that meet Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and the platform, cab, bodywork and decals. The introduction emphasizes that all repair and maintenance work should only be performed by qualified dealership personnel using the proper procedures and tools outlined in the manual.
New holland l228 tier 4 b (final) skid steer loader service repair manual [ng...fujsjefskekfksem
This document is a service manual for New Holland skid steer loaders and compact track loaders with Tier 4B engines. It contains over 150 sections covering the engine, power coupling, axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab and bodywork. The manual provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the specified tools and approved parts. The manufacturer is not responsible for damages caused by unapproved parts.
New holland d180 c tier 2 crawler dozer service repair manual (pin nedc18000 ...fujsjefskekfksem
This document is a service manual for a D180C crawler dozer. It provides specifications for different configurations of the D180C dozer for various markets and regions. For each product and market combination, it lists the corresponding engine used. The manual includes over 100 entries that pair specific D180C dozer configurations with their engine for different markets worldwide.
New holland d180 c tier 2 crawler dozer service repair manual (pin nddc18000 ...fujsjefskekfksem
This document is a service manual for a D180C crawler dozer. It provides specifications for different configurations of the D180C dozer for various global markets. For each product and market combination, it lists the corresponding engine used. The service manual contains detailed information on servicing and repairing the D180C dozer.
New holland d180 c bd tier 2 crawler dozer service repair manualfujsjefskekfksem
This service manual section provides instructions for removing and installing the engine on a D180C Crawler Dozer. The removal process involves detaching the engine from mounting brackets and lifting it away from the frame using lifting equipment. The installation involves cleaning threads, applying threadlock to bolts, and securing the engine flexible coupling to the flywheel before lowering the engine back into position on the frame. Proper lifting and installation are emphasized to prevent injury or damage.
New holland d150 c tier 2 crawler dozer service repair manual (pin nfdc15000 ...fujsjefskekfksem
This document is a service manual for D150C Crawler Dozers that provides information on maintenance and repair of engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, and electrical systems. It includes specifications for different product and engine combinations for various markets. The manual is intended to assist technicians in servicing and repairing components of the D150C dozers.
New holland d150 c tier 2 crawler dozer service repair manual (pin nedc15000 ...fujsjefskekfksem
This document is a service manual for D150C crawler dozers that provides information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, tools, and bodywork. It includes part numbers, safety rules, and instructions for servicing different components of the dozer.
New holland d125 c stage iiib crawler dozer service repair manual (pin nfdc12...fujsjefskekfksem
This document is a service manual for the D125C Crawler Dozer covering models with PIN numbers NDDC12500 and above, NEDC12500 and above, and NFDC12500 and above. The manual provides maintenance and repair instructions for the dozer's engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, climate control, electrical systems, blade, cab, and other components. Safety information is also included to prevent injury during maintenance and repair.
New holland cx8090 elevation combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial CR and CX combine models. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. Each section includes subsections for specific components and systems. The manual provides part numbers and repair information to service technicians for maintaining and repairing the combines.
New holland cx5090 tier 4 combine harvester service repair manualfujsjefskekfksem
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including locations and functions of key components like pumps, valves, cylinders, and reservoirs
- Schematics and diagrams showing hydraulic system layout and component locations
The manual provides technical data, descriptions of functionality, and service information on critical fluid power and electrical systems to support maintenance and repair of the equipment.
New holland cx8.90 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulics, electrical systems, attachments and more. Safety guidelines are provided at the beginning, emphasizing disengaging drives, lowering attachments and shutting off the engine before servicing.
New holland cx8080 elevation combine harvesters service repair manualfujsjefskekfksem
This service manual provides information for servicing and repairing CNH Industrial combine harvesters and their components. It includes technical specifications, diagrams, troubleshooting guides, removal and installation instructions, and other service information for engines, transmissions, axles, hydraulics, electrical systems, attachments, and other systems on the combines. The manual is intended to be used by technicians in CNH Industrial's service network for maintenance and repairs. It contains detailed instructions and procedures for ensuring work is completed correctly by authorized personnel.
New holland cx8040 combine harvesters service repair manualfujsjefskekfksem
The document provides a service manual for various New Holland combine harvester models. It describes the primary hydraulic power system, which uses a variable displacement pump to power key functions like steering, header height control, and straw elevator control. Oil is filtered and distributed through a main valve block and secondary straw elevator valve block to cylinders and motors as needed. The system works in conjunction with the hydrostatic system to provide pressurized hydraulic fluid.
New holland cx5090 tier 3 combine harvester service repair manualfujsjefskekfksem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and emissions control systems. Each section contains technical data, functional descriptions, diagnostics and service instructions for the machine's components.
New holland cx8.85 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for various combine harvester models from CNH Industrial. It contains over 20 sections that provide information on systems of the combines like the engine, transmission, axles, brakes, hydraulics, steering, tracks, electrical systems, and more. Each section includes subsections that go into further detail on specific components. The manual also includes a table linking product models to their corresponding engine.
New holland cr8070 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial combine harvesters and covers systems like the engine, transmission, hydraulics, electrical, and attachments. It provides information on maintenance and repair for components and subsystems across different product models. The manual contains over 50 sections organized by technical area with part numbers and specifications to support service needs.
New holland cr8080 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. The manual provides specifications and repair/replacement procedures for components in these various systems.
New holland c232 tier 4 b (final) compact track loader service repair manual ...fujsjefskekfksem
This document is a service manual for New Holland skid steer loaders and compact track loaders that meet Tier 4B emissions standards. It contains information on engine systems, power coupling, axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. The manual emphasizes that repair and maintenance work should only be performed by qualified dealership personnel according to the procedures in the manual using any special tools recommended.
New holland c232 tier 4 b (final) compact track loader service repair manual ...fujsjefskekfksem
This document provides service information for New Holland compact track loaders and skid steer loaders, including:
- Procedures for draining engine oil either through a remote drain hose or a quick-disconnect fitting.
- Safety precautions for handling fluids and preventing burns or chemical hazards.
- Illustrations of drain plug/fitting locations and the drain process.
New holland b95 c tc four wheel drive (4wd) tier 4b (final) tractor loader ba...fujsjefskekfksem
This document provides service information for New Holland B95C, B95C LR, B95C TC, and B110C tractor loader backhoes, including specifications for the Tier 4B compliant engines. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection. Engine details and specifications are provided for the B95C and B110C models. The document contains sections covering the engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, attachments, and safety information.
This document provides instructions for removing and installing various engine components on a Caterpillar 299D2 compact track loader, including:
- Removing and installing the engine oil relief valve.
- Removing and installing the engine oil pump.
- Removing and installing the water pump.
- Removing and installing the water temperature regulator.
- Removing the flywheel and installing a new ring gear if needed.
The procedures provide illustrations and specify torque specifications and safety precautions for each component.
The document provides instructions for removing and installing various engine components on a Caterpillar 299D2 compact track loader, including:
- Removing and installing the flywheel, which involves cleaning surfaces, heating the ring gear, and torquing bolts to a specified value.
- Removing and installing the crankshaft rear seal, which involves drilling holes, using a slide hammer, and pressing in new seals.
- Removing and installing the crankshaft rear seal carrier, bearing case cover, and lip seal using seal installation tools and threadlocker.
- Removing and installing the flywheel housing, which requires lifting equipment and torquing bolts to a specified value.
-
Caterpillar cat 299 d xhp compact track loader (prefix nlc) service repair ma...fujsjefskekfksem
This document provides removal and installation instructions for various components of a 299D XHP Compact Track Loader, including the diesel particulate filter, air inlet heater, inlet manifold, and inlet and exhaust valves. Detailed steps and illustrations are provided for safely removing each component while taking appropriate precautions. The installation process is described as the reverse of removal, with specified torques for reinstalling hardware.
New holland b95 c four wheel drive (4wd) tier 4b (final) tractor loader backo...fujsjefskekfksem
This document is a service manual for B95C, B95C LR, B95C TC, and B110C Tier 4B (final) tractors and contains sections covering the engine, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and platform/cab/bodywork. It provides repair and maintenance instructions, which should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unauthorized servicing.
Caterpillar cat 299 d xhp compact track loader (prefix jst) service repair ma...fujsjefskekfksem
The document provides instructions for removing and installing various engine components on a Caterpillar 299D XHP compact track loader, including:
- Water pump removal and installation procedures involving loosening guards and bolts, and removing and installing the pump.
- Removing and installing the water temperature regulator by disconnecting hoses and removing/installing bolts, covers, and gaskets.
- Flywheel removal involving marking positions, removing bolts and guards, and inspecting parts, and installation by cleaning, applying oil, and torquing bolts to the specified value.
- Removing and installing the crankshaft rear seal using drilling, sliding hammers, drivers and cleaning components.
Caterpillar cat 299 d compact track loader (prefix gtc) service repair manual...fujsjefskekfksem
This document provides instructions for removing and installing various components on a Caterpillar C3.8 engine, including:
- Removing and installing the fuel injection pump by disconnecting fuel lines and removing mounting nuts.
- Removing and installing electronic unit injectors by removing mounting nuts and clamps.
- Removing and installing the turbocharger by removing mounting nuts and bolts.
- Removing and installing the mass air flow pressure sensor by disconnecting the harness and loosening mounting clamps.
Precautions are outlined such as allowing fuel system pressure to purge before opening lines. Torque specifications are provided for reinstallation of components.
Caterpillar cat 297 d2 multi terrain loader (prefix bl7) service repair manua...fujsjefskekfksem
This document provides instructions for removing and installing various components of a Caterpillar C3.8 engine, including the air inlet heater, inlet manifold, inlet and exhaust valves, and engine oil cooler. The procedures describe disconnecting harness assemblies, removing bolts and flanges, cleaning components, installing new gaskets and seals, and reinstalling parts in the reverse order of removal while following torque specifications. Safety notices are provided regarding the risks of compressed springs.
Caterpillar cat 297 d xhp multi terrain loader (prefix hp7) service repair ma...fujsjefskekfksem
The document provides instructions for removing and installing various components of a Caterpillar 297D XHP Multi Terrain Loader engine, including:
- Removing and installing the fuel injection pump by disconnecting fuel lines, removing mounting bolts and gears, and reinstalling in reverse order.
- Removing and installing electronic unit injectors by removing mounting nuts and clamps, injector seals, and reinstalling in reverse order.
- Removing and installing the turbocharger by removing mounting nuts and bolts, disconnecting hoses and tubes, and reinstalling with anti-seize on bolts.
- Removing and installing the mass air flow pressure sensor by disconnecting hoses and harness, removing mounting screws
New holland cx8090 elevation combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial CR and CX combine models. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. Each section includes subsections for specific components and systems. The manual provides part numbers and repair information to service technicians for maintaining and repairing the combines.
New holland cx5090 tier 4 combine harvester service repair manualfujsjefskekfksem
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including locations and functions of key components like pumps, valves, cylinders, and reservoirs
- Schematics and diagrams showing hydraulic system layout and component locations
The manual provides technical data, descriptions of functionality, and service information on critical fluid power and electrical systems to support maintenance and repair of the equipment.
New holland cx8.90 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulics, electrical systems, attachments and more. Safety guidelines are provided at the beginning, emphasizing disengaging drives, lowering attachments and shutting off the engine before servicing.
New holland cx8080 elevation combine harvesters service repair manualfujsjefskekfksem
This service manual provides information for servicing and repairing CNH Industrial combine harvesters and their components. It includes technical specifications, diagrams, troubleshooting guides, removal and installation instructions, and other service information for engines, transmissions, axles, hydraulics, electrical systems, attachments, and other systems on the combines. The manual is intended to be used by technicians in CNH Industrial's service network for maintenance and repairs. It contains detailed instructions and procedures for ensuring work is completed correctly by authorized personnel.
New holland cx8040 combine harvesters service repair manualfujsjefskekfksem
The document provides a service manual for various New Holland combine harvester models. It describes the primary hydraulic power system, which uses a variable displacement pump to power key functions like steering, header height control, and straw elevator control. Oil is filtered and distributed through a main valve block and secondary straw elevator valve block to cylinders and motors as needed. The system works in conjunction with the hydrostatic system to provide pressurized hydraulic fluid.
New holland cx5090 tier 3 combine harvester service repair manualfujsjefskekfksem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and emissions control systems. Each section contains technical data, functional descriptions, diagnostics and service instructions for the machine's components.
New holland cx8.85 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for various combine harvester models from CNH Industrial. It contains over 20 sections that provide information on systems of the combines like the engine, transmission, axles, brakes, hydraulics, steering, tracks, electrical systems, and more. Each section includes subsections that go into further detail on specific components. The manual also includes a table linking product models to their corresponding engine.
New holland cr8070 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial combine harvesters and covers systems like the engine, transmission, hydraulics, electrical, and attachments. It provides information on maintenance and repair for components and subsystems across different product models. The manual contains over 50 sections organized by technical area with part numbers and specifications to support service needs.
New holland cr8080 combine harvesters service repair manualfujsjefskekfksem
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. The manual provides specifications and repair/replacement procedures for components in these various systems.
New holland c232 tier 4 b (final) compact track loader service repair manual ...fujsjefskekfksem
This document is a service manual for New Holland skid steer loaders and compact track loaders that meet Tier 4B emissions standards. It contains information on engine systems, power coupling, axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. The manual emphasizes that repair and maintenance work should only be performed by qualified dealership personnel according to the procedures in the manual using any special tools recommended.
New holland c232 tier 4 b (final) compact track loader service repair manual ...fujsjefskekfksem
This document provides service information for New Holland compact track loaders and skid steer loaders, including:
- Procedures for draining engine oil either through a remote drain hose or a quick-disconnect fitting.
- Safety precautions for handling fluids and preventing burns or chemical hazards.
- Illustrations of drain plug/fitting locations and the drain process.
New holland b95 c tc four wheel drive (4wd) tier 4b (final) tractor loader ba...fujsjefskekfksem
This document provides service information for New Holland B95C, B95C LR, B95C TC, and B110C tractor loader backhoes, including specifications for the Tier 4B compliant engines. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection. Engine details and specifications are provided for the B95C and B110C models. The document contains sections covering the engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, attachments, and safety information.
This document provides instructions for removing and installing various engine components on a Caterpillar 299D2 compact track loader, including:
- Removing and installing the engine oil relief valve.
- Removing and installing the engine oil pump.
- Removing and installing the water pump.
- Removing and installing the water temperature regulator.
- Removing the flywheel and installing a new ring gear if needed.
The procedures provide illustrations and specify torque specifications and safety precautions for each component.
The document provides instructions for removing and installing various engine components on a Caterpillar 299D2 compact track loader, including:
- Removing and installing the flywheel, which involves cleaning surfaces, heating the ring gear, and torquing bolts to a specified value.
- Removing and installing the crankshaft rear seal, which involves drilling holes, using a slide hammer, and pressing in new seals.
- Removing and installing the crankshaft rear seal carrier, bearing case cover, and lip seal using seal installation tools and threadlocker.
- Removing and installing the flywheel housing, which requires lifting equipment and torquing bolts to a specified value.
-
Caterpillar cat 299 d xhp compact track loader (prefix nlc) service repair ma...fujsjefskekfksem
This document provides removal and installation instructions for various components of a 299D XHP Compact Track Loader, including the diesel particulate filter, air inlet heater, inlet manifold, and inlet and exhaust valves. Detailed steps and illustrations are provided for safely removing each component while taking appropriate precautions. The installation process is described as the reverse of removal, with specified torques for reinstalling hardware.
New holland b95 c four wheel drive (4wd) tier 4b (final) tractor loader backo...fujsjefskekfksem
This document is a service manual for B95C, B95C LR, B95C TC, and B110C Tier 4B (final) tractors and contains sections covering the engine, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and platform/cab/bodywork. It provides repair and maintenance instructions, which should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unauthorized servicing.
Caterpillar cat 299 d xhp compact track loader (prefix jst) service repair ma...fujsjefskekfksem
The document provides instructions for removing and installing various engine components on a Caterpillar 299D XHP compact track loader, including:
- Water pump removal and installation procedures involving loosening guards and bolts, and removing and installing the pump.
- Removing and installing the water temperature regulator by disconnecting hoses and removing/installing bolts, covers, and gaskets.
- Flywheel removal involving marking positions, removing bolts and guards, and inspecting parts, and installation by cleaning, applying oil, and torquing bolts to the specified value.
- Removing and installing the crankshaft rear seal using drilling, sliding hammers, drivers and cleaning components.
Caterpillar cat 299 d compact track loader (prefix gtc) service repair manual...fujsjefskekfksem
This document provides instructions for removing and installing various components on a Caterpillar C3.8 engine, including:
- Removing and installing the fuel injection pump by disconnecting fuel lines and removing mounting nuts.
- Removing and installing electronic unit injectors by removing mounting nuts and clamps.
- Removing and installing the turbocharger by removing mounting nuts and bolts.
- Removing and installing the mass air flow pressure sensor by disconnecting the harness and loosening mounting clamps.
Precautions are outlined such as allowing fuel system pressure to purge before opening lines. Torque specifications are provided for reinstallation of components.
Caterpillar cat 297 d2 multi terrain loader (prefix bl7) service repair manua...fujsjefskekfksem
This document provides instructions for removing and installing various components of a Caterpillar C3.8 engine, including the air inlet heater, inlet manifold, inlet and exhaust valves, and engine oil cooler. The procedures describe disconnecting harness assemblies, removing bolts and flanges, cleaning components, installing new gaskets and seals, and reinstalling parts in the reverse order of removal while following torque specifications. Safety notices are provided regarding the risks of compressed springs.
Caterpillar cat 297 d xhp multi terrain loader (prefix hp7) service repair ma...fujsjefskekfksem
The document provides instructions for removing and installing various components of a Caterpillar 297D XHP Multi Terrain Loader engine, including:
- Removing and installing the fuel injection pump by disconnecting fuel lines, removing mounting bolts and gears, and reinstalling in reverse order.
- Removing and installing electronic unit injectors by removing mounting nuts and clamps, injector seals, and reinstalling in reverse order.
- Removing and installing the turbocharger by removing mounting nuts and bolts, disconnecting hoses and tubes, and reinstalling with anti-seize on bolts.
- Removing and installing the mass air flow pressure sensor by disconnecting hoses and harness, removing mounting screws
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
6. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
87725889C 14/01/2010
3
7. INTRODUCTION
Basic instructions
SHIMMING
For each adjustment operation, select adjusting shims and measure individually using a micrometer, then add up
the recorded values. Do not rely on measuring the entire shimming set, which may be incorrect, or the rated value
indicated on each shim.
ROTATING SHAFT SEALS
For correct rotating shaft seal installation, proceed as follows:
• before assembly, allow the seal to soak in the oil it will be sealing for at least thirty minutes
• thoroughly clean the shaft and check that the working surface on the shaft is not damaged
• position the sealing lip facing the fluid; with hydrodynamic lips, take into consideration the shaft rotation direction
and position the grooves so that they will deviate the fluid towards the inner side of the seal
• coat the sealing lip with a thin layer of lubricant (use oil rather than grease) and fill the gap between the sealing lip
and the dust lip on double lip seals with grease
• insert the seal in its seat and press down using a flat punch, do not tap the seal with a hammer or mallet
• whilst inserting the seal, check that it is perpendicular to the seat; once settled, make sure that it makes contact
with the thrust element, if required
• to prevent damaging the seal lip on the shaft, position a protective guard during installation operations
O-RING SEALS
Lubricate the O-RING seals before inserting them in the seats, this will prevent them from overturning and twisting,
which would jeopardize sealing efficiency.
SEALING COMPOUNDS
Apply one of the following sealing compounds on the mating surfaces marked with an X: RTV SILMATE,
RHODORSIL CAF 1 or LOCTITE™ PLASTIC GASKET. Before applying the sealing compound, prepare the
surfaces as follows:
• remove any incrustations using a metal brush;
• thoroughly de-grease the surfaces using one of the following cleaning agents: trichlorethylene, petrol or a water
and soda solution.
COTTER PINS
When fitting split cotter pins, ensure that the pin notch is positioned in the direction of the force required to stress the
pin. Spiral cotter pins do not require special positioning.
87725889C 14/01/2010
5
8. INTRODUCTION
PROTECTING THE ELECTRONIC/ ELECTRICAL SYSTEMS DURING CHARGING OR WELD-
ING
To avoid damage to the electronic/electrical systems, always observe the following:
1. Never make or break any of the charging circuit connections, including the battery connections, when the engine
is running.
2. Never short any of the charging components to ground.
3. Always disconnect the ground cable from the battery before arc welding on the unit or on any header attached to
the unit.
• Position the welder ground clamp as close to the welding area as possible.
• If welding in close proximity to a computer module, then the module should be removed from the unit.
• Never allow welding cables to lay on, near or across any electrical wiring or electronic component while welding
is in progress.
4. Always disconnect the negative cable from the battery when charging the battery in the unit with a battery charger.
NOTICE: If welding must be performed on the unit, either the unit or the header (if it is attached), the battery ground
cable must be disconnected from the unit battery. The electronic monitoring system and charging system will be
damaged if this is not done.
Remove the battery ground cable. Reconnect the cable when welding is completed.
WARNING
Battery acid causes severe burns. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing.
Antidote - EXTERNAL: flush with water. INTERNAL: drink large quantities of water or milk. Follow with milk
of magnesia, beaten egg or vegetables oil. Call physician immediately. EYES: flush with water for 15 minutes
and get prompt medical attention.
84-110
87725889C 14/01/2010
6
9. SERVICE MANUAL
DISTRIBUTION SYSTEMS
CR9060 Elevation , CR9060 , CR9070 Elevation , CR9080 Elevation , CR9080 ,
CR9090 Elevation , CX8030 , CX8040 , CX8050 , CX8060 , CX8070 , CX8080 ,
CX8090
87725889C 14/01/2010
A
10. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Special tools
DESCRIPTION NEW HOLLAND
PART NUMBER
(All Markets Except North America)
Blanking Cap 11/16 ORFS 297671
Pressure Gauge 0 - 10 bar ( 0 - 150 psi) 293241#
Pressure Gauge 0 - 40 bar ( 0 - 600 psi) 293242#
Pressure Gauge 0 - 250 bar ( 0 - 5000 psi) 293244#
Remote valve coupling 5101741 or 293449
Quick release adaptor (Female) 291924
Pressure gauge hose 292246#
1/8 NPT fitting to attach hose 292246 to gauge 291927#
Adaptor M10 x 1.0p x 7/16 JIC male (enables use of
gauges with 7/16 JIC hoses if used)
297417
MiniMess (M16x2) Quick attach fitting (procure locally)
Flow Meter 120 ltr/min ( 0-50 gal/min) minimum
(procure locally)
# Part of hydraulic pressure test kit 292870
O-RING FACE SEAL TUBE ADAPTORS PARKER HANNIFIN PART NUMBER
Tee Piece (M12x1.5 with 9/16 UNF) - CCLS Pump Load
sensing
4M12R870MLOS
Tee Piece (13/16 UNF fittings) - Steering 8R6MLOS
Elbow (13/16 UNF fittings) - Steering 8ELOS
Quick Release Fitting (9/16 UNF Male) - CCLS Pump
Load Sensing
PD34BTL
Quick Release Fitting (13/16 UNF Male) - Steering PD38BTL
87725889C 14/01/2010
A.10.A / 3
11. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - General specification
MAIN HYDRAULIC PUMP
Type Variable Flow Closed Centre
Load Sensing Piston Pump
Minimum Output @ engine rated speed 114 Ltr/min
30 US gal/min
Standby Pressure 21 bar ( 305 psi)
Maximum System Pressure 207 bar ( 3000 psi)
Flow to Steering Motor 36 Ltr/min
9.5 US gal/min
Steering Pressure 186 bar ( 2700 psi)
87725889C 14/01/2010
A.10.A / 4
12. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Static description
The high pressure circuit operates all of the work hydraulics and steering. The circuit is fed by a closed centre load
sensing variable displacement pump (4). Oil is drawn by the pump, from the main reservoir, shared with the hydro-
static system, through the inline pressure filter to the mainframe valve block.
The oil enters the main frame valve block at the priority valve slice and there the oil is split, dependant on demand, to
the steering valve, which has priority, or to the other hydraulic functions.
The unloading tube control, drum variator control and header height control are served by the main frame stack.
BSC1256B 1
The straw elevator and header reverser, lateral flotation control, reel vertical and horizontal adjustment and reel speed
control are served by the straw elevator stack valve. The straw elevator stack valve is an extension of the main
frame stack valve and is connected with pressure (31a), return (31b), and load sensing lines (31c), via quick release
couplings.
BSC1254A 2
The last section of the straw elevator stack valve is a flush valve. This valve allows a very small oil flow through the
stack valves, when no services are being operated, allowing warm oil to bring the stack valve assembly gradually up
to temperature.
The circuit return oil flows through to the return side filter back to the pump or to the reservoir.
The high pressure circuit is linked with the hydrostatic circuit. The hydrostatic pump (3) feeds the hydrostatic circuit.
The charge return and case drain oil flows through to the thermostat and cooler back to the reservoir or high pressure
circuit.
ZEIL07CX0062A0B 3
87725889C 14/01/2010
A.10.A / 5
13. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
The CCLS pump uses the return oil from the hydrostatic system as its charge pressure oil and therefore does not
incorporate a charge pump. The hydrostatic return oil comes into the pump via the oil cooler at the rate of 60 l/min
( 63 qts/min). Only when working in high demand conditions does the CCLS pump create an under pressure in the
suction line.
87725889C 14/01/2010
A.10.A / 6
14. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Overview
1 Engine 33 Straw elevator and header reversing valve
2 Gearbox 34 Straw elevator and header reversing motor
3 Hydrostatic pump 35 Lateral flotation control valve
4 CCLS pump 36 Lateral float pressure compensation valve
5 Low pressure gear pump 37 Lateral flotation cylinder
6 Load sensing valve 38 Lateral float accumulator
( 80 bar [ 1160 psi], 0.5 L [ 17 oz])
7 High pressure relief valve
( 197 bar ( 2856 psi)
39 Lateral float accumulator
( 100 bar [ 1450 psi], 0.5 L [ 17 oz])
8 In-line high pressure filter 40 Lateral float minimum pressure valve
9 Priority valve 41 Reel horizontal adjustment valve
10 Steering relief valve 42 Reel horizontal adjustment cylinders
11 Load sensing shuttle valve 43 Reel vertical adjustment valve, reel up
12 Steering motor 44 Reel vertical adjustment cylinders
13 Steering cylinders 45 Reel drive / speed adjustment valve
14 Header height pressure valve 46 Reel vertical adjustment valve, reel down
15 High pressure relief valve
220 bar ( 3190 psi)
47 Reel pressure compensation valve
16 Accumulator lock out valve 48 Reel drive motor
17 Header suspension accumulator
( 70 bar [ 1015 psi], 0.5 L [ 17 oz])
49 Reel reverser
18 Pressure sensor 50 Return filter with by-pass
19 Header height control valve 51 Blocked filter indicator switch
20 Header raise valve 52 Thermostat valve
21 Header lower valve 53 Cooler
22 Header pressure compensation valve 54 Suction filter
23 Header lift cylinders 55 Filler cap with breather
24 Electronic control unit 56 Hydraulic oil, minimum level indicator
25 Drum variator valve, variator speed up 57 Reservoir
25a Drum variator valve, variator speed down 58 Drain hose
26 Drum variator adjustment plunger 59 Temperature sensor
27 Unloading tube control valve 60 Multi-line quick coupler
28 Unloading tube cylinder lock out 61 Jammer valve
29 Unloading tube cylinder 62 Drum variator accumulator
30 Not used 63 Varifeed™ hydraulic valve
31 Quick attach couplers 64 Varifeed™ knife cylinders
32 Not used
87725889C 14/01/2010
A.10.A / 7
15. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BSC1362B 1
HIGH PRESSURE SYSTEM - COMPONENT LOCATION
87725889C 14/01/2010
A.10.A / 8
16. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BSC1361A 2
HIGH PRESSURE SYSTEM - COMPONENT LOCATION
87725889C 14/01/2010
A.10.A / 9
17. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Component localisation
NOTE: The reference numbers used in the illustrations and text relate to the identification numbers used on the High
Pressure Circuit Diagram, PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic schema (A.10.A).
(3) Hydrostatic Pump
Although not part of the high pressure system, the return oil from the hydrostatic motors is used as charge pressure
oil for the high pressure CCLS pump.
(4) Closed Centre Load Sensing (CCLS) Pump
Provides the oil for the high pressure system. Will supply the pressure as demanded by the services in use due to its
load sensing and variable displacement capability. Has the advantage over a fixed pump in that it reduces the engine
power absorbed when maximum pump flow is not required.
(5) Low Pressure Gear Pump
Totally separate from the high pressure system. Mounted on the CCLS pump from where it takes its drive.
ZEIL07CX0062A0B 1
(6) Load Sensing Valve (mounted on CCLS pump)
(7) High Pressure Relief Valve (mounted on CCLS pump)
Output from the CCLS pump is determined by adjusting the angle of the swash plate. The load sensing valve senses
the circuit operating pressure and adjusts the swash plate angle to control pump output. If pump output rises to 197
bar ( 2857 psi) the high pressure relief valve overrides the load sensing valve and adjusts the swash plate angle to
limit maximum system pressure.
ZEIL07CX0063A0B 2
(8) In Line High Pressure Filter
A replaceable filter located between the CCLS pump output and the high pressure system priority valve.
87725889C 14/01/2010
A.10.A / 10
18. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BSC1265A 3
(12) Steering Motor
Supplied oil via the priority valve in the main frame stack. The steering motor directs and controls oil to the steering
cylinders, based on input via movement of the steering wheel.
There are 2 different motors available. An OSPF 315 cc load sensing fixed capacity unit for North America only and
an OSPQ 160/320 cc load sensing variable capacity unit for all other locations.
BSC1257A 4
(13) Steering Cylinders
BSC1263A 5
(23) Header Lift Cylinder
87725889C 14/01/2010
A.10.A / 11
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BSC1269A 6
87725889C 14/01/2010
A.10.A / 12
21. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
ZEIL07CX0065A0B 7
Main Frame Stack Valve Assembly
(9) Priority Valve
Located in the main frame stack valve, receives the output oil from the CCLS pump and will
provide steering with the priority for oil. Actuated by pressure within the load sense lines.
(10) Load Sense / Steering Relief Valve
Located in the priority valve. When the pressure in the load sense circuit or steering circuit
exceeds a preset value the relief valve will blow and then maintain a maximum pressure in
the load sense or steering circuits.
(11) Load Sensing Shuttle Valve
Located in each valve slice. Allows the function with the highest pressure demand to send
sensing pressure to the load sensing valve on the CCLS pump.
(14) Header Height Pressure Valve
Controls the pressure within the header height cylinders.
Contains the high pressure relief valve (15), accumulator lock out valve (16) and pressure
sensor (18).
(16) Accumulator Lock Out Valve
Solenoid controlled valve which isolates the accumulator from the raise and lower circuit.
(19) Header Height Control Valve
Controls the raising and lowering of the header. Contains the PWM raise and lower valves
and compensation valve.
(20) Header Raise Valve
A PWM controlled valve, allows pressure oil to the raise cylinder.
(21) Header Lower Valve
A PWM controlled valve, allows oil to be released from the lift cylinders under control.
(22) Header Pressure Compensation Valve
Ensures that height raise speed is consistent in all operating conditions, provides
compensation to pressure spikes in the system.
(25) Drum Variator Control Valve
Controls the plunger within the variator drum drive unit to provide adjustable variator speed.
Solenoid operated valves either allow pressure oil to provide a speed increase or release
oil pressure to decrease speed.
(27) Unloading Tube Control Valve
Controls the unloading tube cylinder. Consists of two electrically operated solenoid valves.
(15) High Pressure Relief Valve
This acts as a shock relief valve for the header. Sudden rises in pressure, as felt at the lift cylinders, are relieved
through this valve.
(17) Header Suspension Accumulator
Absorbs the slight movement to the header encountered during normal operating. The accumulator is rated at 70 bar
pressure with a volume of 0.5 L.
87725889C 14/01/2010
A.10.A / 13
22. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BSC1255B 8
(18) Pressure Sensor
Measures the hydraulic pressure within the header circuit. Sends a signal to the header electronic control unit.
(24) Electronic Control Unit
Controls the header height via the PWM controlled raise and lower solenoids, based on the signal sent by the operator
cab controls.
(26) Drum Variator Adjustment Plunger
Operated via the drum variator valve, the plunger is a hydraulic cylinder that operates a floating disc within the variator
assembly to alter variator speed.
ZEIL07CX0064A0B 9
(28) Unloading Tube Lockout Block
Isolates the unload cylinder from the control valve and pipework. Ensures that the unload tube will remain in the
required position until the control valve is activated. When pressure oil is applied to the lock out block, a bleed line is
supplied to the opposite side which releases the lock valve and allows oil to escape. When the pressure oil is removed
the lock out valves close and prevent cylinder movement.
(29) Unload Tube Cylinder
Operates the unload arm, controlled by the unload tube control valve and lock out block.
BSC1260A 10
(31) Quick Attach Couplers
Connects the main stack valve block to the header valve block assembly.
(31a) = Pressure supply
(31b) = Return line
87725889C 14/01/2010
A.10.A / 14
23. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
(31c) = Load sensing line
NOTE: The return line must always be correctly connected. The quick attach coupler of the return line incorporates
check valves allowing flow back to the main frame stack valve. If the engine is started with the return line disconnected
oil will escape from the valve block.
ZEIL07CX0066F0B 11
Straw Elevator Valve Stack
(33) Straw Elevator and Header Reversing Valve
Controls the motor for the straw elevator and header reverser. Contains two electrically controlled solenoids which
move a spool to obtain forward, reverse or a float position on the motor.
(35) Lateral Flotation Control Valve
Controls the lateral flotation cylinder. Consists of two electrically controlled solenoids, a pressure compensation valve
and a lock out valve.
(36) Lateral Float Pressure Compensation Valve
Ensures that lateral float operation is consistent in all operating conditions, provides compensation to pressure spikes
in the system.
(40) Lateral Float Minimum Pressure Valve
This is a resistant valve and prevents the header from jerky counterclockwise movement and jerky operation when
the cylinder is retracted. This is necessary because of the non-North American header being heavier on the left hand
side. The valve is set at approximately 60 bar ( 870 psi).
(41) Reel Horizontal Adjustment Valve
(42) Reel Horizontal Adjustment Cylinders
Controls the horizontal position of the reel. The valve consists of two electrically operated solenoids and a lock out
valve.
(43) Reel Vertical Adjustment Valve
Controls the vertical adjustment cylinders. Consists of two electrically operated solenoids and a lock out valve.
(44) Reel Vertical Adjustment Cylinders
Two cylinders, a master and a slave, supplied oil from the vertical adjustment valve (43). The slave is powered by the
rod end oil of the master cylinder.
(49) Flush Valve
87725889C 14/01/2010
A.10.A / 15
24. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
When there are no services in use, charge pressure oil is allowed to join the return circuit through the flush valve.
This function allows a flow of oil through the header stack valve thereby circulating warm oil through the valves.
(34) Straw Elevator and Header Reversing Motor
BSC1268A 12
(37) Lateral Flotation Cylinder
Adjusts header angle in relation to the combine.
(38) Lateral Float Accumulator - Lowering side - 50 bar ( 725 psi)
(39) Lateral Float Accumulator - Raise Side - 75 bar ( 1088 psi)
BSC1261A 13
(50) Return Filter with Bypass
(51) Return Filter Element Differential Drop Indicator.
Electrical switch to indicate pressure differential as the filter becomes clogged during service.
BSC1262A 14
(52) Thermostat Valve
Cooler bypass valve, directs cold oil away from the cooler and back into the return circuit. As the oil progressively
warms up the oil is then allowed, by the thermostat valve, through the cooler. A relief valve is incorporated to allow
direct routing to the return circuit when the pressure is too high for the system to cope with.
(53) Cooler
Hydraulic oil cooler, mounted with the engine cooler on the right hand side of the vehicle.
87725889C 14/01/2010
A.10.A / 16
25. DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
BSC1259A 15
(54) Suction Filter
Located in the base of the reservoir in the suction line supplying the hydrostatic pump.
(55) Filler Cap With Breather
(56) Minimum level electrical switch for hydraulic oil reservoir. (high pressure system and hydrostatic system oil).
(57) Hydraulic Oil Reservoir (high pressure system and hydrostatic system oil).
(59) Temperature Sensor
Measures hydraulic oil temperature, high oil temperature indicated at 85 °C ( 185 °F).
BSC1264A 16
(60) Header Hoses Quick Release Coupling.
BSC1258A 17
87725889C 14/01/2010
A.10.A / 17