This document is a service manual for CNH Industrial CR and CX combine models. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. Each section includes subsections for specific components and systems. The manual provides part numbers and repair information to service technicians for maintaining and repairing the combines.
New holland tc5080 combine harvesters service repair manual instant downloadufjjsjekksekmm
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and from there to the reservoir tank. The valve protects the system from pressures over 8 bar (116 psi) by venting excess pressure.
New holland tc5070 combine harvesters service repair manual instant downloadufjjsjekksekmm
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and then to the reservoir tank. A quick disconnect fitting allows connection of air lines for cleaning nozzles and tire inflation.
4. The document provides diagrams of the air compressor and pressure relief valve, as well
New holland tc5060 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual for TC5060, TC5070, and TC5080 combine models. It contains sections covering the engine, transmission, front axle system, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, residue handling, cleaning, and crop storage/unloading. The manual provides technical specifications and instructions for servicing and repairing components in these various systems.
New holland tc5.90 hillside fpt nef tier 4 b combine harvesters service repai...ufjjsjekksekmm
This document is a service manual that provides maintenance and repair instructions for the TC5.80, TC5.90, and TC5.90 Hillside combine models. It contains over 190 sections organized by technical system, with each section dedicated to a specific component or function. The manual emphasizes that all repair work must only be performed by qualified dealership personnel using the provided instructions and special tools, in order to avoid potential damages.
New holland tc5.90 fpt nef tier 4 b combine harvesters service repair manual ...ufjjsjekksekmm
This document is a service manual for the TC5.80, TC5.90, and TC5.90 Hillside combine models. It contains introduc-
tory information and outlines the contents which include sections on the engine, transmission, axle systems, hydraulics,
brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, storage/unloading, and cab/bodywork.
It stresses that all repair and maintenance should only be done by qualified dealership personnel using the proper tools
and procedures to avoid damage.
New holland tc5.80 fpt nef tier 4 b combine harvesters service repair manual ...ufjjsjekksekmm
This document provides service information for the engine air compressor and compressed air tank relief valve used on Case IH TC5.80, TC5.90, and TC5.90 Hillside combine models. It includes diagrams of the components, descriptions of their functions, and port information. Proper maintenance and repair of these systems is important for supplying compressed air for cleaning and tire inflation.
New holland tc5.30 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual for the TC5.30 combine with and without cab. It contains sections covering the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, cleaning, crop storage and unloading, platform, cab, bodywork, and decals. The introduction provides a foreword and notes the technical information is written to support maintenance and servicing of the machine's functions and systems.
New holland cx8090 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. Instructions are provided for maintenance, diagnosis, and repair of individual parts and assemblies.
New holland tc5080 combine harvesters service repair manual instant downloadufjjsjekksekmm
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and from there to the reservoir tank. The valve protects the system from pressures over 8 bar (116 psi) by venting excess pressure.
New holland tc5070 combine harvesters service repair manual instant downloadufjjsjekksekmm
1. The document is a service manual that provides technical information for maintaining and repairing components on TC5000 series combine harvesters, including the engine air compressor.
2. The air compressor is a single cylinder, gear driven unit that supplies compressed air to a reservoir tank for cleaning and tire inflation. It is mounted directly to the engine and uses engine oil for lubrication.
3. The compressed air is delivered to a combination pressure relief valve and then to the reservoir tank. A quick disconnect fitting allows connection of air lines for cleaning nozzles and tire inflation.
4. The document provides diagrams of the air compressor and pressure relief valve, as well
New holland tc5060 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual for TC5060, TC5070, and TC5080 combine models. It contains sections covering the engine, transmission, front axle system, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, residue handling, cleaning, and crop storage/unloading. The manual provides technical specifications and instructions for servicing and repairing components in these various systems.
New holland tc5.90 hillside fpt nef tier 4 b combine harvesters service repai...ufjjsjekksekmm
This document is a service manual that provides maintenance and repair instructions for the TC5.80, TC5.90, and TC5.90 Hillside combine models. It contains over 190 sections organized by technical system, with each section dedicated to a specific component or function. The manual emphasizes that all repair work must only be performed by qualified dealership personnel using the provided instructions and special tools, in order to avoid potential damages.
New holland tc5.90 fpt nef tier 4 b combine harvesters service repair manual ...ufjjsjekksekmm
This document is a service manual for the TC5.80, TC5.90, and TC5.90 Hillside combine models. It contains introduc-
tory information and outlines the contents which include sections on the engine, transmission, axle systems, hydraulics,
brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, storage/unloading, and cab/bodywork.
It stresses that all repair and maintenance should only be done by qualified dealership personnel using the proper tools
and procedures to avoid damage.
New holland tc5.80 fpt nef tier 4 b combine harvesters service repair manual ...ufjjsjekksekmm
This document provides service information for the engine air compressor and compressed air tank relief valve used on Case IH TC5.80, TC5.90, and TC5.90 Hillside combine models. It includes diagrams of the components, descriptions of their functions, and port information. Proper maintenance and repair of these systems is important for supplying compressed air for cleaning and tire inflation.
New holland tc5.30 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual for the TC5.30 combine with and without cab. It contains sections covering the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, cleaning, crop storage and unloading, platform, cab, bodywork, and decals. The introduction provides a foreword and notes the technical information is written to support maintenance and servicing of the machine's functions and systems.
New holland cx8090 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. Instructions are provided for maintenance, diagnosis, and repair of individual parts and assemblies.
New holland cx8090 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that describes the primary hydraulic power system. It includes a high pressure circuit that operates all work hydraulics and steering using a variable displacement pump. Oil flows through filters and a valve block to functions like steering, drum speed control, and header height control. Quick couplers connect a straw elevator valve block extension to the main block. The system is linked to the hydrostatic circuit to share charge pressure oil and cooling.
New holland cx8080 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This document is a service manual for CNH Industrial combine harvesters and covers systems like the engine, transmission, hydraulics, electrical, and attachments. It provides information on maintenance and repair for components and subsystems across different product models. The manual contains over 50 sections organized by technical area with part numbers and specifications to support service needs.
New holland cx8080 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that provides information on the primary hydraulic power system for a combine harvester. The system uses a variable displacement pump to power hydraulic functions like steering, the header, and threshing components. Oil is filtered and distributed through valves to cylinders and motors that control different parts of the machine. The manual details the purpose and location of hydraulic components like pumps, filters, accumulators and valves that make up the high-pressure circuit supplying hydraulic power.
New holland cx8070 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, cab climate control, and attachments. The manual provides information on maintenance, troubleshooting, and repair of components.
New holland cx8070 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
New holland cx8060 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during charging or welding to ensure repairs are completed correctly.
New holland cx8050 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that provides information on the primary hydraulic power system for a combine harvester. The system uses a variable displacement pump to power hydraulic functions like steering, the header, and threshing components. Oil is filtered and distributed through valves to cylinders and motors that control different parts of the machine. Diagrams show the layout and components of the hydraulic circuitry.
New holland cx8040 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, steering, brakes, crop processing equipment, and more. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
New holland cx8030 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, steering, brakes, body, crop processing, and protection systems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during charging or welding to ensure repairs are completed correctly.
New holland cx7080 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This document is a service manual for CNH Industrial CR and CX combine models. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. Each section includes subsections for specific components and systems. The manual provides part numbers and repair information to service technicians for maintaining and repairing the combines.
New holland cx6090 tier 3 combine harvester service repair manual instant dow...ufjjsjekksekmm
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including specifications for the main, steering, and lateral flotation hydraulic pumps
- A hydraulic schematic showing the layout of the hydraulic system and locations of key components
- Images showing the locations of hydraulic components on the front of the machine including the header quick-release coupler and lift/float cylinders.
New holland cx6090 laterale tier 4 combine harvester service repair manual in...ufjjsjekksekmm
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting, leveling, feeding, threshing, separating, cleaning, storing, and unloading systems. Each section contains technical data, functional descriptions, diagnostics, and service instructions for the machine's components.
New holland cx6080 tier 3 combine harvester service repair manual instant dow...ufjjsjekksekmm
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including specifications for the main, steering, and lateral flotation pumps.
- Schematics and diagrams showing the layout of the hydraulic system and location of key components.
New holland cx6080 cx6090 tier 4 combine harvester service repair manual inst...ufjjsjekksekmm
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting, leveling, feeding, threshing, separating, cleaning, storing, and unloading systems. Each section contains technical data, functional descriptions, diagnostics, and service instructions for the machine's components.
New holland cx5090 tier 4 combine harvester service repair manual instant dow...ufjjsjekksekmm
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting, leveling, feeding, threshing, separating, cleaning, storing, and unloading systems. Each section contains technical data, functional descriptions, diagnostics, and service instructions for the machine's components.
New holland cx5090 tier 3 combine harvester service repair manual instant dow...ufjjsjekksekmm
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including pump specifications and a hydraulic schematic diagram
- Images showing the location of hydraulic components on the front of the machine
The manual provides technical data, diagrams, and images to support servicing the machine's distribution systems. It gives specifications for hydraulic components and diagrams the hydraulic circuit, locating key components.
New holland cr960 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland cr940 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland cr920 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland br6090 round balers service repair manual instant downloadufjjsjekksekmm
This document is a service manual for BR6080 and BR6090 balers. It contains sections on hydraulic, pneumatic, electrical, electronic and other systems of the balers. The introduction provides information on how to use the manual, which is coded using an Integrated Coding Environment to classify repair operations by location, type of information, and product. It outlines the manual's structure and explains the coding references. Basic safety rules are also listed, such as working on stopped equipment, wearing protective equipment, and using lifting devices for heavy parts.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
New holland cx8090 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that describes the primary hydraulic power system. It includes a high pressure circuit that operates all work hydraulics and steering using a variable displacement pump. Oil flows through filters and a valve block to functions like steering, drum speed control, and header height control. Quick couplers connect a straw elevator valve block extension to the main block. The system is linked to the hydrostatic circuit to share charge pressure oil and cooling.
New holland cx8080 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This document is a service manual for CNH Industrial combine harvesters and covers systems like the engine, transmission, hydraulics, electrical, and attachments. It provides information on maintenance and repair for components and subsystems across different product models. The manual contains over 50 sections organized by technical area with part numbers and specifications to support service needs.
New holland cx8080 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that provides information on the primary hydraulic power system for a combine harvester. The system uses a variable displacement pump to power hydraulic functions like steering, the header, and threshing components. Oil is filtered and distributed through valves to cylinders and motors that control different parts of the machine. The manual details the purpose and location of hydraulic components like pumps, filters, accumulators and valves that make up the high-pressure circuit supplying hydraulic power.
New holland cx8070 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, cab climate control, and attachments. The manual provides information on maintenance, troubleshooting, and repair of components.
New holland cx8070 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
New holland cx8060 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during charging or welding to ensure repairs are completed correctly.
New holland cx8050 combine harvesters service repair manual instant downloadufjjsjekksekmm
The document is a service manual that provides information on the primary hydraulic power system for a combine harvester. The system uses a variable displacement pump to power hydraulic functions like steering, the header, and threshing components. Oil is filtered and distributed through valves to cylinders and motors that control different parts of the machine. Diagrams show the layout and components of the hydraulic circuitry.
New holland cx8040 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, steering, brakes, crop processing equipment, and more. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
New holland cx8030 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, steering, brakes, body, crop processing, and protection systems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during charging or welding to ensure repairs are completed correctly.
New holland cx7080 elevation combine harvesters service repair manual instant...ufjjsjekksekmm
This document is a service manual for CNH Industrial CR and CX combine models. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. Each section includes subsections for specific components and systems. The manual provides part numbers and repair information to service technicians for maintaining and repairing the combines.
New holland cx6090 tier 3 combine harvester service repair manual instant dow...ufjjsjekksekmm
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including specifications for the main, steering, and lateral flotation hydraulic pumps
- A hydraulic schematic showing the layout of the hydraulic system and locations of key components
- Images showing the locations of hydraulic components on the front of the machine including the header quick-release coupler and lift/float cylinders.
New holland cx6090 laterale tier 4 combine harvester service repair manual in...ufjjsjekksekmm
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting, leveling, feeding, threshing, separating, cleaning, storing, and unloading systems. Each section contains technical data, functional descriptions, diagnostics, and service instructions for the machine's components.
New holland cx6080 tier 3 combine harvester service repair manual instant dow...ufjjsjekksekmm
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details on the primary hydraulic system, including specifications for the main, steering, and lateral flotation pumps.
- Schematics and diagrams showing the layout of the hydraulic system and location of key components.
New holland cx6080 cx6090 tier 4 combine harvester service repair manual inst...ufjjsjekksekmm
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting, leveling, feeding, threshing, separating, cleaning, storing, and unloading systems. Each section contains technical data, functional descriptions, diagnostics, and service instructions for the machine's components.
New holland cx5090 tier 4 combine harvester service repair manual instant dow...ufjjsjekksekmm
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, lifting, leveling, feeding, threshing, separating, cleaning, storing, and unloading systems. Each section contains technical data, functional descriptions, diagnostics, and service instructions for the machine's components.
New holland cx5090 tier 3 combine harvester service repair manual instant dow...ufjjsjekksekmm
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including pump specifications and a hydraulic schematic diagram
- Images showing the location of hydraulic components on the front of the machine
The manual provides technical data, diagrams, and images to support servicing the machine's distribution systems. It gives specifications for hydraulic components and diagrams the hydraulic circuit, locating key components.
New holland cr960 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland cr940 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland cr920 combine harvesters service repair manual instant downloadufjjsjekksekmm
This document is a repair manual for New Holland combines models CR920 through CR980. It provides repair instructions organized into sections covering the engine, transmission, hydraulics, electrical systems, harvesting components, and other areas of the combines. Safety precautions are outlined, and general information is provided on product identification, torque specifications, fittings, lubrication, and sealants to aid in repairs.
New holland br6090 round balers service repair manual instant downloadufjjsjekksekmm
This document is a service manual for BR6080 and BR6090 balers. It contains sections on hydraulic, pneumatic, electrical, electronic and other systems of the balers. The introduction provides information on how to use the manual, which is coded using an Integrated Coding Environment to classify repair operations by location, type of information, and product. It outlines the manual's structure and explains the coding references. Basic safety rules are also listed, such as working on stopped equipment, wearing protective equipment, and using lifting devices for heavy parts.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
3. Link Product / Engine
Product Market Product Engine
CR9080 [1779 - ] International Region F3BE0684N*E916
CR9080 [Y9G113001 -
YAG113831]
North America F3BE0684N*E916
CR9080 [YAG113901 - ] North America F3BE0684N*E916
CR9080 [Y8G112001 -
Y9G112788]
North America F3BE0684N*E916
CR9080 [1779 - ] Latin America F3BE0684N*E916
47612507 08/04/2014
4. Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.254] Intake and exhaust manifolds and muffler ......................................... 10.2
[10.500] Selective Catalytic Reduction (SCR) exhaust treatment ........................... 10.3
[10.400] Engine cooling system ............................................................. 10.4
[10.418] Rotary screen ...................................................................... 10.5
[10.450] Engine air compressor ............................................................. 10.6
Main gearbox and drive ............................................................... 14
[14.100] Main gearbox and drive ............................................................ 14.1
Transmission.............................................................................. 21
[21.114] Mechanical transmission ........................................................... 21.1
[21.130] Mechanical transmission external controls......................................... 21.2
[21.145] Gearbox internal components...................................................... 21.3
[21.182] Differential.......................................................................... 21.4
Front axle system ....................................................................... 25
[25.108] Final drive hub, steering knuckles, and shafts ..................................... 25.1
[25.310] Final drives ......................................................................... 25.2
Rear axle system........................................................................ 27
[27.124] Final drive hub, steering knuckles, and shafts ..................................... 27.1
Hydrostatic drive......................................................................... 29
[29.100] Transmission and steering hydrostatic control ..................................... 29.1
[29.204] Reservoir, cooler, and lines ........................................................ 29.2
[29.218] Pump and motor components...................................................... 29.3
[29.202] Hydrostatic transmission ........................................................... 29.4
[29.300] Rear hydrostatic transmission...................................................... 29.5
47612507 08/04/2014
5. Brakes and controls .................................................................... 33
[33.202] Hydraulic service brakes ........................................................... 33.1
[33.110] Parking brake or parking lock ...................................................... 33.2
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.300] Reservoir, cooler, and filters........................................................ 35.2
[35.106] Variable displacement pump ....................................................... 35.3
[35.102] Pump control valves................................................................ 35.4
[35.359] Main control valve.................................................................. 35.5
[35.322] Regulated/Low pressure system ................................................... 35.6
[35.220] Auxiliary hydraulic pump and lines ................................................. 35.7
[35.410] Header or attachment height system .............................................. 35.8
[35.602] Header or attachment leveling system ............................................. 35.9
[35.760] Header reverser drive ............................................................ 35.10
[35.992] Stone trapping system ........................................................... 35.11
[35.994] Positive Straw Discharge (PSD) ................................................. 35.12
[35.796] Chaff spreader control ........................................................... 35.13
[35.440] Grain tank unload system ........................................................ 35.14
[35.450] Traction variator system.......................................................... 35.15
Steering..................................................................................... 41
[41.101] Steering control .................................................................... 41.1
[41.200] Hydraulic control components...................................................... 41.2
[41.432] Autoguidance steering ............................................................. 41.3
Tracks and track suspension........................................................ 48
[48.138] Track rollers ........................................................................ 48.1
[48.130] Track frame and driving wheels .................................................... 48.2
[48.134] Track tension units ................................................................. 48.3
[48.100] Tracks .............................................................................. 48.4
47612507 08/04/2014
6. Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
[50.104] Ventilation .......................................................................... 50.2
[50.200] Air conditioning..................................................................... 50.3
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
[55.100] Harnesses and connectors......................................................... 55.2
[55.201] Engine starting system ............................................................. 55.3
[55.301] Alternator........................................................................... 55.4
[55.988] Selective Catalytic Reduction (SCR) electrical system ............................ 55.5
[55.640] Electronic modules ................................................................. 55.6
[55.029] Gearbox electric system ........................................................... 55.7
[55.019] Hydrostatic drive control system ................................................... 55.8
[55.512] Cab controls........................................................................ 55.9
[55.051] Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls................. 55.10
[55.050] Heating, Ventilation, and Air-Conditioning (HVAC) control system............... 55.11
[55.662] Header height control ............................................................ 55.12
[55.628] Threshing electrical control ...................................................... 55.13
[55.427] Straw walker variator............................................................. 55.14
[55.426] Harvest material flow control system............................................. 55.15
[55.624] Residue handling control......................................................... 55.16
[55.785] Precision farming system ........................................................ 55.17
[55.911] Global Positioning System (GPS) ................................................ 55.18
[55.680] Autopilot/Autoguidance .......................................................... 55.19
[55.518] Wiper and washer system........................................................ 55.20
[55.404] External lighting .................................................................. 55.21
[55.405] External lighting switches and relays ............................................ 55.22
[55.514] Cab lighting ...................................................................... 55.23
47612507 08/04/2014
11. INTRODUCTION
Foreword
CR Series Tier IV WE ---
CR8070 [1779 - ]
CR8080 [1779 - ]
CR9080 [1779 - ]
CX7000 Elevation series WE
CX8000 Elevation series WE
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
47612507 08/04/2014
3
12. INTRODUCTION
Basic instructions - How to use and navigate through this manual
CR Series Tier IV WE ---
CR8070 [1779 - ]
CR8080 [1779 - ]
CR9080 [1779 - ]
CX7000 Elevation series WE
CX8000 Elevation series WE
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through Web delivery (eTim), DVD and in paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to
the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to describe
e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model for which the piece of technical information is written.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customer's concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47612507 08/04/2014
4
13. INTRODUCTION
How to use this manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components and assemblies.
• Service Data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number 00, 35, 55, etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance
05 - Machine completion and equipment
10 - Engine
14 - Main gearbox and drive
18 - Clutch
21 - Transmission
23 - Four wheel drive system
25 - Front axle system
27 - Rear axle system
29 - Hydrostatic drive
31 - Implement power take-off
33 - Brakes and controls
35 - Hydraulic systems
36 - Pneumatic system
37 - Hitches, drawbars and implement couplings
39 - Frames and ballasting
41 - Steering
44 - Wheels
46 - Steering clutches
48 - Tracks and track suspension
50 - Cab climate control
55 - Electrical systems
56 - Grape harvester shaking
58 - Attachments/headers
60 - Product feeding
61 - Metering system
62 - Pressing - Bale formation
47612507 08/04/2014
5
14. INTRODUCTION
63 - Chemical applicators
64 - Chopping
66 - Threshing
68 - Tying/Wrapping/Twisting
69 - Bale wagons
70 - Ejection
71 - Lubrication system
72 - Separation
73 - Residue handling
74 - Cleaning
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding
78 - Spraying
79 - Planting
80 - Crop storage / Unloading
82 - Front loader and bucket
83 - Telescopic single arm
84 - Booms, dippers and buckets
86 - Dozer blade and arm
88 - Accessories
89 - Tools
90 - Platform, cab, bodywork and decals
47612507 08/04/2014
6
15. INTRODUCTION
Safety rules
CR Series Tier IV WE ---
CR series Tier III
CX7000 Elevation series WE
CX8000 Elevation series WE
PRECAUTIONARY STATEMENTS
Personal Safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
Throughout this manual and on machine decals, you will find precautionary statements ("DANGER", "WARNING",
and "CAUTION") followed by specific instructions. These precautions are intended for the personal safety of you and
those working with you. Please take the time to read them.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. The color
associated with Danger is RED.
M1169A
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. The
color associated with Warning is ORANGE.
M1170A
CAUTION
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury. The color associated with Caution is YELLOW.
M1171A
FAILURE TO FOLLOW "DANGER", "WARNING", AND "CAUTION" INSTRUCTIONS MAY RESULT IN SERIOUS
BODILY INJURY, DAMAGE TO HEALTH OR DEATH.
NOTICE: Install new decals if the old decals are destroyed, lost painted over or cannot be read. When parts are
replaced that have decals make sure you install a new decal with each new part.
MACHINE SAFETY
NOTICE: The word "notice" is used to inform the reader of something they need to know to prevent minor machine
damage if a certain procedure is not followed.
The precautionary statements ("Important") is followed by specific instructions. This statement is intended for machine
safety.
INFORMATION
NOTE: Instructions used to identify and present supplementary information.
LEGAL OBLIGATIONS
This machine may be equipped with special guarding or other devices in compliance with local legislation. Some to
these require active use by the operator. Therefor, check local legislations on the usage of this machine.
47612507 08/04/2014
13
17. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
18. Engine - Engine and crankcase
Engine - Remove
CR Series Tier IV WE ---
CR8070 [1779 - ]
CX7000 Elevation series WE
CX8000 Elevation series WE
NOTE: The engine and cooling system used in the combine is designed to be removed as a modular unit. The follow-
ing engine removal procedure demonstrates the removal of the engine only from the module. This procedure takes
into consideration the possible unavailability of proper, or sufficient lifting equipment for complete module removal.
When possible, remove the engine and cooling system module as designed.
1. Remove the gearbox and hydraulic pumps from the en-
gine. (Refer to Main gearbox and drive - Remove
(14.100))
Place a suitable container (1) below the coolant drain
hose (2).
NOTE: Depending on model, the cooling system has a
coolant capacity between 50 - 60 l (13.2 - 15.9 US gal). Be
sure to use clean containers with adequate capacity when
draining the cooling system.
10013105_780 1
2. Refer to Expansion tank - Remove (10.400) for the
coolant fluid drain and removal of the engine coolant
reservoir.
NOTE: Depending on the model, the combine engine has an oil capacity between 29 - 35 l (7.7 - 9.2 US gal). Be
sure to use clean containers with adequate capacity when draining the engine oil.
3. Remove the cap (1) and turn the engine oil drain valve
(2), to the open position. Drain all of the engine oil into
suitable containers.
10013107 2
4. Loosen and remove the mounting hardware from the
protection cover (1).
Remove the cover (1) from the engine compartment.
ZEIL09CR0245A0B 3
47612507 08/04/2014
10.1 [10.001] / 3