The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections
- Details on the primary hydraulic power system, including locations of key components like pumps, valves, cylinders. and schematics of fluid flow
- Technical data on hydraulic pumps used in main, steering, and lateral flotation circuits
The manual provides maintenance technicians with the information needed to service hydraulic, electrical, and electronic systems through technical specifications, schematics, and component locations. It aims to support the repair and maintenance of the key distribution and control systems.
New Holland D180C Tier 4 Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
- The 631 kg engine is removed from the dozer using lifting equipment and separated from the hydraulic pump stack
- It is then reinstalled by slowly lowering it back into the frame cradle and reconnecting it to the pump stack
- Mounting brackets are secured to the engine and frame with bolts torqued to specified values to firmly attach the engine
New Holland CX8090 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New Holland TC5070 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5070 Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5060 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for various tractor models. It includes sections on the engine, transmission, brakes, hydraulics, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and other systems. The engine section includes subsections on the engine air compressor. It provides technical details, diagrams, and instructions for removing and installing the air compressor.
New Holland TC5060 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
New Holland TC5050 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filters, a valve stack containing various control valves, hydraulic cylinders for header height control and unloading, accumulators, steering components, and a rotary union.
New Holland TC5050 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for various tractor models. It includes:
- An introduction section outlining the purpose and organization of the manual.
- Technical sections covering various vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems. Each section includes technical data, descriptions of components, and procedures for service, removal and installation.
- Detailed diagrams, specifications and troubleshooting information to assist with repairs and maintenance.
The manual is intended to help trained service technicians properly service and repair components according to the manufacturer's instructions. It organizes complex technical content for easy reference to specific vehicle systems and components.
New Holland D180C Tier 4 Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
- The 631 kg engine is removed from the dozer using lifting equipment and separated from the hydraulic pump stack
- It is then reinstalled by slowly lowering it back into the frame cradle and reconnecting it to the pump stack
- Mounting brackets are secured to the engine and frame with bolts torqued to specified values to firmly attach the engine
New Holland CX8090 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New Holland TC5070 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5070 Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5060 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for various tractor models. It includes sections on the engine, transmission, brakes, hydraulics, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and other systems. The engine section includes subsections on the engine air compressor. It provides technical details, diagrams, and instructions for removing and installing the air compressor.
New Holland TC5060 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
New Holland TC5050 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filters, a valve stack containing various control valves, hydraulic cylinders for header height control and unloading, accumulators, steering components, and a rotary union.
New Holland TC5050 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for various tractor models. It includes:
- An introduction section outlining the purpose and organization of the manual.
- Technical sections covering various vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems. Each section includes technical data, descriptions of components, and procedures for service, removal and installation.
- Detailed diagrams, specifications and troubleshooting information to assist with repairs and maintenance.
The manual is intended to help trained service technicians properly service and repair components according to the manufacturer's instructions. It organizes complex technical content for easy reference to specific vehicle systems and components.
New Holland TC5040 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header and other attachments.
New Holland TC5060 Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5040 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New Holland D140B Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
The document provides instructions for removing the engine from a D140B crawler dozer. Key steps include removing the radiator, intake air cooler, engine hood, wiring harnesses, fuel lines, and mounting bolts. The drive shaft must be disconnected from the hydro pumps before lifting the engine from the machine.
New Holland D150 Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
This document provides a workshop manual for the D150 crawler dozer. It begins with safety rules and warnings for operating and servicing the dozer. It then provides sections covering general machine information, identification data, specifications, dimensions, technical data, leakages, instructions and more. The manual is organized into 7 main sections covering generalities, the engine, transmission, final drives, brakes/steering, undercarriage, dozer equipment, hydraulics, and electrical systems.
New Holland CX8080 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting guides, and procedures for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. Instructions are provided for maintenance, diagnosing issues, and repairing or replacing parts.
New Holland C238 Tier 4A Compact Track Loader Service Repair Manual.pdfufsekmdmmdd
This service manual section provides instructions for removing the engine from a CNH Industrial C238 or L230 compact track loader or skid steer loader. The key steps include: draining fluids, disconnecting electrical and hydraulic connections, removing access panels and covers, and then lifting the engine out after all connections are detached. Safety precautions are provided to avoid injury when working on or around the machine.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
New Holland TC5080 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, residue handling, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information, and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5080 Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, lift cylinders, accumulators, steering components, and controls for the header and unloading auger.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The document provides service information for various tractor models. It includes:
- An introduction section outlining the manual's contents and how to navigate it.
- Individual sections covering different vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems.
- Chapters within each section detailing the technical, functional, diagnostic and service data for components of that system.
- Illustrations, diagrams and step-by-step instructions for removing and installing parts.
The manual is intended as a technical reference for carrying out maintenance and repairs by authorized service technicians. It classifies information by vehicle system and component to allow technicians to quickly find relevant specifications, operating principles, fault codes and repair
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland DC150B Tier 2 Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
The document provides safety rules and instructions for operating a crawler dozer, emphasizing the importance of following safety precautions to avoid accidents. Operators are instructed to thoroughly study the manual, check the machine for safety, keep the operating area clear of others, and park securely whenever leaving the machine unattended. Failure to comply with the safety rules could result in damage or injury.
New Holland CL560 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This document is a repair manual that provides technical information for repairing and servicing New Holland agricultural equipment models CS520, CS540, CS640, CS660 and CL560. It contains sections on distribution systems, power production, power train, travelling, body and structure, tool positioning and crop processing. Each section contains chapters that provide technical data, functional descriptions, diagnostic information and service procedures for the components of each system. The manual explains how to use the coding system to locate specific information and provides an overview of the primary hydraulic power system components and their locations.
New Holland L230 Tier 4A Skid Steer Loader Service Repair Manual.pdfufsekmdmmdd
This service manual section provides instructions for removing the engine from a CNH Industrial C238 or L230 compact track loader or skid steer loader. The key steps include: draining fluids, disconnecting electrical and hydraulic connections, removing access panels and covers, and then lifting the engine out after all connections are detached. Safety precautions are provided to avoid injury when working on or around the machine.
New Holland B115C Backhoe Loader Service Repair Manual.pdfufsekmdmmdd
This document is a service manual that provides technical specifications, maintenance and repair instructions for backhoe loaders. It includes sections covering safety, the engine, transmission, axles, brakes, hydraulics, electrical systems, and attachments. The manual provides detailed instructions on removal and installation of components, disassembly and assembly, troubleshooting, and specifications for the loader and backhoe attachments.
New Holland D150B Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
This document provides instructions to remove the engine from a D150B XLT crawler dozer. The steps include draining fluids, disconnecting wiring harnesses and hoses connected to components like the air filter, radiator, fuel lines, starter motor and alternator. Mounting bolts securing the engine hood and components like the fan and radiator are also removed to separate the engine from the machine. Safety precautions are outlined and illustrations supplement the text instructions.
New Holland CX8070 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New Holland CX7090 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New Holland TC5040 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, filter, accumulator, lift cylinders, steering valve and cylinders, and controls for the header and other attachments.
New Holland TC5060 Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5040 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New Holland D140B Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
The document provides instructions for removing the engine from a D140B crawler dozer. Key steps include removing the radiator, intake air cooler, engine hood, wiring harnesses, fuel lines, and mounting bolts. The drive shaft must be disconnected from the hydro pumps before lifting the engine from the machine.
New Holland D150 Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
This document provides a workshop manual for the D150 crawler dozer. It begins with safety rules and warnings for operating and servicing the dozer. It then provides sections covering general machine information, identification data, specifications, dimensions, technical data, leakages, instructions and more. The manual is organized into 7 main sections covering generalities, the engine, transmission, final drives, brakes/steering, undercarriage, dozer equipment, hydraulics, and electrical systems.
New Holland CX8080 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting guides, and procedures for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. Instructions are provided for maintenance, diagnosing issues, and repairing or replacing parts.
New Holland C238 Tier 4A Compact Track Loader Service Repair Manual.pdfufsekmdmmdd
This service manual section provides instructions for removing the engine from a CNH Industrial C238 or L230 compact track loader or skid steer loader. The key steps include: draining fluids, disconnecting electrical and hydraulic connections, removing access panels and covers, and then lifting the engine out after all connections are detached. Safety precautions are provided to avoid injury when working on or around the machine.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the combines includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are the hydraulic pumps, oil tank, filters, valves, cylinders, and accumulators. Hydraulic flow is distributed to functions like the header, steering, and optional lateral flotation systems.
New Holland TC5080 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes and controls, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, residue handling, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information, and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland TC5080 Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The air compressor supplies compressed air to the reservoir tank to provide a source of compressed air for cleaning and tire inflation. It is a single cylinder, gear-driven compressor mounted directly to the engine. Engine oil lubricates the compressor. The compressed air relief valve protects the system from pressures over 8 bar by venting excess pressure. It can be removed by draining the air and coolant lines, loosening connections, and removing mounting bolts and nuts.
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
The primary hydraulic power system for the TC5000 combine includes multiple pumps that supply hydraulic fluid to various systems through a valve stack. The main components are two or three hydraulic pumps, an oil tank, lift cylinders, accumulators, steering components, and controls for the header and unloading auger.
New Holland TC5080 Hillside Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The document provides service information for various tractor models. It includes:
- An introduction section outlining the manual's contents and how to navigate it.
- Individual sections covering different vehicle systems like the engine, transmission, brakes, hydraulics and electrical systems.
- Chapters within each section detailing the technical, functional, diagnostic and service data for components of that system.
- Illustrations, diagrams and step-by-step instructions for removing and installing parts.
The manual is intended as a technical reference for carrying out maintenance and repairs by authorized service technicians. It classifies information by vehicle system and component to allow technicians to quickly find relevant specifications, operating principles, fault codes and repair
New Holland TC5070 Hillside Combine Harvesters Service Repair Manual 1.pdfufsekmdmmdd
The document provides service information for engines and various components of agricultural combines.
It includes sections on the engine, clutch, transmission, front and rear axle systems, brakes, hydraulic systems, electrical systems, attachments and headers, product feeding, threshing, separation, cleaning, and the cab.
Technical data, functional descriptions, diagnostic information and service procedures are provided for mechanical, electrical and hydraulic components. Fault codes and troubleshooting information is also included for electrical systems.
New Holland DC150B Tier 2 Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
The document provides safety rules and instructions for operating a crawler dozer, emphasizing the importance of following safety precautions to avoid accidents. Operators are instructed to thoroughly study the manual, check the machine for safety, keep the operating area clear of others, and park securely whenever leaving the machine unattended. Failure to comply with the safety rules could result in damage or injury.
New Holland CL560 Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This document is a repair manual that provides technical information for repairing and servicing New Holland agricultural equipment models CS520, CS540, CS640, CS660 and CL560. It contains sections on distribution systems, power production, power train, travelling, body and structure, tool positioning and crop processing. Each section contains chapters that provide technical data, functional descriptions, diagnostic information and service procedures for the components of each system. The manual explains how to use the coding system to locate specific information and provides an overview of the primary hydraulic power system components and their locations.
New Holland L230 Tier 4A Skid Steer Loader Service Repair Manual.pdfufsekmdmmdd
This service manual section provides instructions for removing the engine from a CNH Industrial C238 or L230 compact track loader or skid steer loader. The key steps include: draining fluids, disconnecting electrical and hydraulic connections, removing access panels and covers, and then lifting the engine out after all connections are detached. Safety precautions are provided to avoid injury when working on or around the machine.
New Holland B115C Backhoe Loader Service Repair Manual.pdfufsekmdmmdd
This document is a service manual that provides technical specifications, maintenance and repair instructions for backhoe loaders. It includes sections covering safety, the engine, transmission, axles, brakes, hydraulics, electrical systems, and attachments. The manual provides detailed instructions on removal and installation of components, disassembly and assembly, troubleshooting, and specifications for the loader and backhoe attachments.
New Holland D150B Crawler Dozer Service Repair Manual.pdfufsekmdmmdd
This document provides instructions to remove the engine from a D150B XLT crawler dozer. The steps include draining fluids, disconnecting wiring harnesses and hoses connected to components like the air filter, radiator, fuel lines, starter motor and alternator. Mounting bolts securing the engine hood and components like the fan and radiator are also removed to separate the engine from the machine. Safety precautions are outlined and illustrations supplement the text instructions.
New Holland CX8070 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New Holland CX7090 Elevation Combine Harvesters Service Repair Manual.pdfufsekmdmmdd
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Contents
INTRODUCTION
HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS A
PRIMARY HYDRAULIC POWER SYSTEM.............................................. A.10.A
PNEUMATIC SYSTEM ................................................................... A.20.A
ELECTRICAL POWER SYSTEM ........................................................ A.30.A
ELECTRONIC SYSTEM ................................................................. A.50.A
FAULT CODES ........................................................................... A.50.A
ENGINE AND PTO IN ................................................................... B
EXHAUST SYSTEM Emissions control .................................................. B.40.B
TRANSMISSION, DRIVE AND PTO OUT........................................ C
TRANSMISSION Mechanical ............................................................ C.20.B
TRANSMISSION Hydrostatic............................................................. C.20.F
PROCESS DRIVE Primary process drive ................................................ C.50.B
AXLES, BRAKES AND STEERING................................................. D
FRONT AXLE ............................................................................ D.10.A
REAR AXLE .............................................................................. D.12.A
2WD-4WD SYSTEM Hydrostatic......................................................... D.14.E
STEERING Hydraulic..................................................................... D.20.C
STEERING Mechanical .................................................................. D.20.B
SERVICE BRAKE Hydraulic.............................................................. D.30.C
PARKING BRAKE Mechanical ........................................................... D.32.B
FRAME AND CAB ........................................................................ E
USER PLATFORM ....................................................................... E.34.A
ENVIRONMENT CONTROL Heating system ............................................ E.40.B
ENVIRONMENT CONTROL Air-conditioning system .................................... E.40.C
FRAME POSITIONING ................................................................. F
FRAME LEVELLING ..................................................................... F.30.A
TOOL POSITIONING.................................................................... G
84386774A 11/05/2011
5. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
84386774A 11/05/2011
3
6. INTRODUCTION
Foreword
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through CD-ROM and in paper manuals. A coding system called ICE has been
developed to link the technical information to other Product Support functions e.g. Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customers
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to the
technical information in this manual to resolve that customers concern, you will find all the information classified using
the new ICE coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating this new ICE coding into technical information , you will be able to search and retrieve just the right
piece of technical information you need to resolve that customers concern on his machine. This is made possible by
attaching 3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to
describe e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model that the piece of technical information is written for.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customers concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
84386774A 11/05/2011
4
7. INTRODUCTION
How to Use this Manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assem-
blies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assem-
blies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hy-
draulic devices, components and assemblies.
• Service data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices,
components and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by
a letter A, B, C etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
SECTION
A - Distribution Systems
B - Power Production
C - Power Train
D - Travelling
E - Body and Structure
F - Frame Positioning
G - Tool Positioning
H - Working Arm
J - Tools and Couplers
K - Crop Processing
L - Field Processing
PRODUCT
Tractors X X X X X X X X
Vehicles with working arms: backhoes,
excavators, skid steers, .....
X X X X X X X X X
Combines, forage harvesters, balers, .... X X X X X X X X X X
Seeding, planting, floating, spraying
equipment, ....
X X X X X X X X X
Mounted equipment and tools, ..... X X X X
84386774A 11/05/2011
5
8. INTRODUCTION
This manual contains these Sections. The contents of each Section are explained over the following pages.
Contents
INTRODUCTION
DISTRIBUTION SYSTEMS A
POWER PRODUCTION B
POWER TRAIN C
TRAVELLING D
BODY AND STRUCTURE E
TOOL POSITIONING G
CROP PROCESSING K
Section Contents
SECTION A, DISTRIBUTION SYSTEMS
This Section covers the main systems that interact with most of the functions of the product. It includes the central
parts of the hydraulic, electrical, electronic, pneumatic, lighting and grease lubrication systems. The components that
are dedicated to a specific function are listed in the Chapter where all the technical information for that function is
included.
SECTION B, POWER PRODUCTION
This Section covers all the functions related to the production of power to move the machine and to drive various
devices.
SECTION C, POWER TRAIN
This Section covers all the functions related to the transmission of power from the engine to the axles and to internal
or external devices and additional Process Drive functions.
SECTION D, TRAVELLING
This Section covers all the functions related to moving the machine, including tracks, wheels, steering and braking. It
covers all the axles both driven axles and non-driven axles, including any axle suspension.
SECTION E, BODY AND STRUCTURE
This Section covers all the main functions and systems related to the structure and body of the machine. Including
the frame, the shields, the operator's cab and the platform.
SECTION G, TOOL POSITIONING
This Section covers all the functions related to the final and/or automatic positioning of the tool once the tool is posi-
tioned using the Working Arm or the machine frame.
SECTION K, CROP PROCESSING
This Section covers all the functions related to crop processing.
84386774A 11/05/2011
6
10. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Torque
Union nuts
55009 1
Ferrules
The ferrule must be pre-assembled on the tube. Tighten the union nut as specified in the table below. The ferrule and
screw thread are greased.
Torque Nm (lb.ft)
Tube outer diameter mm (inch)
Minimum Maximum
8 (0.32) 15 (11) 20 (15)
10 (0.4) 25 (18) 30 (22)
12 (0.47) 35 (26) 40 (29)
16 (0.63) 50 (37) 55 (40)
18 (0.71) 60 (44) 70 (51)
22 (0.87) 100 (74) 110 (81)
28 (1.10) 110 (81) 120 (88)
Metric fittings
Unions
Are suitable for use with union nuts and ferrules and ball-type nipples.
55011 2
84386774A 11/05/2011
A.10.A / 3
11. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Connections
Are screwed in ISO metric thread - tolerance class 6H - with a tightening torque as specified in the table below.
55012 3
Torque Nm (lb.ft)
Tube outer diameter mm (inch)
Minimum Maximum
8 (0,32) 40 (29) 45 (33)
10 (0,40) 65 (48) 70 (51)
12 (0,47) 80 (59) 85 (63)
16 (0,63) 100 (74) 120 (88)
18 (0,71) 120 (88) 140 (103)
22 (0,87) 200 (147) 220 (164)
28 (1,10) 350 (257) 380 (280)
Swivel nut with ball-type nipple
Are suitable for use with female unions
55013 4
D1 Torque Nm (lb.ft)
6H Minimum Maximum
M14 x 1.5 - -
M16 x 1.5 15 (11) 20 (15)
M18 x 1.5 20 (15) 25 (18)
M24 x 1.5 30 (22) 35 (26)
M26 x 1.5 - -
M30 x 2 - -
M36 x 2 - -
84386774A 11/05/2011
A.10.A / 4
12. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - General specification
The hydraulic system contains three hydraulic pumps
ZDF0052A 1
Main hydraulic pump (2)
Type: Silence gear type
Direction of rotation left-hand rotation
Maximum pressure 280 bar ( 4061 psi)
Maximum speed 3000 rpm
Output per revolution 16.5 cc/rev.
Maximum oil flow 48 l/min ( 12.7 gal/min)
Hydraulic pump (Steering circuit) (3)
Type: Silence gear type
Direction of rotation left-hand rotation
Maximum pressure 280 bar ( 4061 psi)
Maximum speed 3000 rpm
Output per revolution 5.5 cc/rev.
Maximum oil flow 12 l/min ( 3.2 gal/min)
Hydraulic pump (Lateral flotation circuit) (4) (if installed)
Type: Gear type
Direction of rotation left-hand rotation
Maximum pressure 230 bar ( 3336 psi)
Maximum speed 3000 rpm
Output per revolution 2 cc/rev.
Maximum oil flow 6 l/min ( 1.6 gal/min)
84386774A 11/05/2011
A.10.A / 5
13. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic schema
1. Engine 20. Reel horizontal adjustment cylinders
2. Pump (main hydraulics) 21. Header and straw elevator reversing valve
3. Pump (steering circuit) 22. Screw couplers with non return valve
4. Pump (lateral flotation) (If installed) 23. Header and straw elevator reversing motor
5. Oil reservoir 24. Steering valve
6. Filler cap with filter 25. Steering cylinder(s)
7. Load sensing valve 27. Load sensing valve
8. Header height control valve 28. Lateral flotation control valve
9. Header cylinders 29. Lateral flotation cylinder
10. Accumulator control valve 30. Lateral float minimum pressure valve ( 60 bar)
11. Header suspension accumulator 30
a.
Lateral float accumulator ( 120 bar)
12. Pressure sensor 30
b.
Lateral float accumulator ( 85 bar)
13. Unloading tube control valve 31. Drain hose
14. Unloading tube cylinder 32. Low pressure filter
15. Reel vertical adjustment valve 33. Breather with filter and non-return valve
16. Reel vertical adjustment cylinders P. Inlet (high pressure)
17. Reel horizontal adjustment valve R. Return (low pressure)
18. Quick-attach coupler - - - Pilot line, load sensing line
19. Non-return valve (single direction restrictor) 42. Pilot valve
P1. P1 = 140 bar for adjustable steering axle (A.S.A.).
P1 = 160 bar for fixed or powered rear axle.
P2. P2 = 200 bar for adjustable steering axle (A.S.A.).
P1 = 220 bar for fixed or powered rear axle.
84386774A 11/05/2011
A.10.A / 6
14. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Overview
ZEIL11CX0660F0B 1
ZEIL11CX0661F0B 2
84386774A 11/05/2011
A.10.A / 12
15. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
PRIMARY HYDRAULIC POWER SYSTEM - Component localisation
NOTE: To find the location of those components, refer to PRIMARY HYDRAULIC POWER SYSTEM - Overview
(A.10.A)
FRONT
Header
Header quick-release coupler (18)
ZDA6003C 1
Lateral float cylinder (29) (if lateral float installed)
RNIL08CS0002A0B 2
Straw elevator
Header lift cylinders (9)
ZDA5998C 3
84386774A 11/05/2011
A.10.A / 13
16. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Lateral float accumulator ( 120 bar) (30a)
Lateral float accumulator ( 85 bar) (30b)
ZEIL06CS0141A0B 4
Screw couplers with non return valve (22)
Header and straw elevator reversing motor (23)
ZDA6258B 5
Under cab
Steering valve (24)
ZDA7538A 6
84386774A 11/05/2011
A.10.A / 14
17. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
LEFT-HAND SIDE
Cab left
Load sensing valve (7)
Header height control valve (8)
Unloading tube control valve (13)
Reel vertical adjustment valve (15)
Reel horizontal adjustment valve (17)
Header and straw elevator reversing valve (21)
Load sensing valve (27)
Lateral flotation control valve (28)
Lateral float minimum pressure valve ( 60 bar) (30)
RNPH08CS0008A0B 7
Above front wheel
Unload tube cylinder (14)
ZEIL11CX0662A0B 8
Straw elevator and header engaging cylinder (37)
ZEIL11CX0663A0B 9
Unloading engaging cylinder (41)
ZEIL11CX0664A0B 10
84386774A 11/05/2011
A.10.A / 15
18. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Middle
Drain hose (31)
ZEIL10CX0188A0Z 11
Above
Threshing engaging clutch (34)
Rotary union (35)
ZEIL06CS0092A0C 12
84386774A 11/05/2011
A.10.A / 16
19. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
ABOVE
Oil reservoir (5)
Filler cap with filter (6)
Breather with filter and non-return valve (33)
Low pressure filter (32)
ZEIL10CX0191A0Z 13
Main hydraulic pump (2)
Pump (3) (Steering circuit)
Pump (4) (Lateral flotation)
ZEIL06CS0150A0B 14
UNDER
Above front axle
Header suspension accumulator (11)
Pressure sensor (12)
RNIL08CS0005A0B 15
At the back
Steering cylinder(s) (25)
ZDA7540A 16
84386774A 11/05/2011
A.10.A / 17
20. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Stack valve - Dynamic description
If all valves are in the "0" position, then:
The valves (13), (15), (17), (21) and (28), (Refer to Stack valve - Static description (A.10.A)) are closed, which
means that the oil can not flow through these valves.
The pressure raises at (7b), (27b), until the load sensing spool is pushed open against spring pressure (delta P= 3
bar) and the return pressure in the pilot line (7a), (27a). Now pump oil flows into the return line at standby pressure.
When activating the lateral float control spools (if installed), the hydraulic cylinder pressure (pump pressure measured
after the spool restriction) is present in the pilot line (7a), (27a) and closes the load sensing spool. The oil pressure is
available for the activated control spool(s).
When the pump pressure reaches the cylinder pressure (+ 3 bar), the load sensing spool is pushed open. The nec-
essary amount of oil will flow to the control spool at the needed pressure. Excess oil is dumped into the return line.
When activating valves without direct load sensing, (13), (15), (17) and (21), the pilot valve (42) is activated as well to
connect the pressure line with the load sensing line and closes the load sensing spool. The oil pressure is available
for the activated control spool(s).
When the pump pressure reaches the cylinder pressure (+ 3 bar), the load sensing spool is pushed open. The nec-
essary amount of oil will flow to the control spool at the needed pressure. Excess oil is dumped into the return line.
When the cylinder reaches end of stroke, the system pressure starts to raise. When the pilot pressure reaches 207
bar for the main stack valve ( 175 bar for the lateral float stack valve) the pressure relief valve is pushed open and
system pressure is limited to 210 bar (207 + 3 bar)
The load sensing lockout valve ensures that pilot pressure cannot escape into the return.
RNPH08CS0008A0B 1
84386774A 11/05/2011
A.10.A / 18
21. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Operation of reversing system valve (21).
In neutral position of the valve, both motor connections are connected to each other by the return system. When
switching the valve to position “1" or “2", the pilot valve (42) is activated as well to connect the pressure line with the
load sensing line and closes the load sensing spool. Full oil flow is available towards the hydraulic motor.
RNPH08CS0008A0B 2
Operation of the reel vertical adjustment valve (15).
When switching this valve, the pilot valve (42) is activated as well to connect the pressure line with the load sensing
line and closes the load sensing spool. Full oil flow is available towards the hydraulic cylinder.
These valves are connected to a single-acting cylinder which means that only one lockout valve is provided in the
connection towards the cylinder.
RNPH08CS0008A0B 3
Operation of the unloading tube control valve (13) and the reel horizontal adjustment valve (17).
When switching one of these valves, the pilot valve (42) is activated as well to connect the pressure line with the load
sensing line and closes the load sensing spool. Full oil flow is available towards the hydraulic cylinder.
Lockout valves are installed in the connections towards the cylinder.
RNPH08CS0008A0B 4
84386774A 11/05/2011
A.10.A / 19
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Stack valve - Static description
The main hydraulic system will be a open centre load sensing system that controls all high pressure functions: All
header functions and unloading auger swing.
The hydraulic system contains one stack valve:
• Main stack valve . (see also hydraulic schematic PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic
schema (A.10.A)) Located at the left-hand side of the cab behind the steering platform.
RNPH08CS0008A0B 1
The stack valve consists of two main parts.
• Control valves for oil supply and load sensing (7 and 27)
Refer to PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic schema (A.10.A)
Load sensing is a system which avoids high pressure when the valves are in neutral position and consequently,
less heating up of the oil and creating load-independent flow rate control.
• Control valves with load sensing (13-15-17-21-28)
Refer to PRIMARY HYDRAULIC POWER SYSTEM - Hydraulic schema (A.10.A).
RNPH08CS0008A0B 2
13 Unloading tube movement
15 Reel vertical adjustment
17 Reel horizontal adjustment
21 Reversing system
28 Lateral float system
84386774A 11/05/2011
A.10.A / 20
24. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - Exploded view
ZDF0842A 1
Main hydraulic pump
1 Pump housing 2 Bearing end plate
3 Radial-lip-type oil seal 4 Retaining ring
5 Housing cover 6 Toothed washer
7 Toothed gear 8 Toothed gear
9 Woodruff key 10 Hexagon nut
11 Spring lock washer 12 Protective cap
13 Protective cap 14 Bushing
15 Bushing 16 Head screw
17 Straight pin 18 Straight pin
19 Set of seals
NOTE: Tighten the screw (16) with a torque between 12 - 16 Nm. ( 9 - 12 lb ft)
84386774A 11/05/2011
A.10.A / 21
25. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Filter - Static description
The low pressure filter (32) is installed on top of the hydraulic reservoir (5) and has a bypass (non-return) valve set to
1.15 bar ( 17 psi).
The return oil from the hydraulics system is flowing through the low pressure filter before entering the hydraulic oil
reservoir.
ZEIL10CX0191A0Z 1
84386774A 11/05/2011
A.10.A / 22
26. HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Breather - Static description
The breather (33) allows the air in the reservoir to escape whenever a considerable oil flow arrives at the reservoir
(e.g. when lowering the attachment).
ZEIL10CX0191A0Z 1
84386774A 11/05/2011
A.10.A / 23