This document provides instructions for removing the engine from a tractor by separating it from the transmission. Key steps include draining fluids, removing components like the seat, fenders and decks. Wiring is disconnected and the instrument panel is removed. Then roll pins and retaining rings are taken out of the shift shafts to allow separation of the engine and transmission.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8uijfskmdmd
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrpoy9396615
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to sensors and modules. Seals and O-rings that are removed need to be replaced. Hoses and lines must be capped after disconnection to prevent leaks.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8uijfskmdmd
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff7jseidjkdmm3e
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8skjdkdmdmd
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding potential hazards and how to avoid injury or death while operating or servicing the equipment.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8uijfskmdmd
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrpoy9396615
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to sensors and modules. Seals and O-rings that are removed need to be replaced. Hoses and lines must be capped after disconnection to prevent leaks.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8uijfskmdmd
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff7jseidjkdmm3e
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8skjdkdmdmd
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding potential hazards and how to avoid injury or death while operating or servicing the equipment.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfqzje6212365
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to ECM and other modules. Hoses for engine cooling, air conditioning and fuel need to be disconnected as well. All openings need to be plugged after disconnecting lines and hoses.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
This document is a service manual for Magnum tractors models 235, 260, 290, 315, and 340. It contains information on engine systems, transmission, four-wheel drive systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering systems, cab climate control, and electrical systems. Safety precautions and symbols are defined at the beginning.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrjyy35510376
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8dusjkdmmdmd
This document is a service manual for Magnum tractors models 235, 260, 290, 315, and 340. It contains information on engine systems, transmission, four-wheel drive systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering systems, cab climate control, and electrical systems. Safety precautions and symbols are defined at the beginning.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrpoy9396615
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding potential hazards and how to avoid injury or death while operating or servicing the equipment.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8skjdkdmdmd
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8uijfskmdmd
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrpoy9396615
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to ECM and other modules. Hoses for engine cooling, air conditioning and fuel need to be disconnected as well.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8skjdkdmdmd
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to ECM and other modules. Hoses for engine cooling, air conditioning and fuel need to be disconnected as well.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding potential hazards and how to avoid injury or death while operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual Instant Download [ZBRD07000 ...jiaohui4482378
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
New Holland CR7090 Tier 4a Combine Service Repair Manual (Pin YBG115106 and u...f8uusejkddm7u
This service manual provides information for servicing the following models: CR6090, CR7090, CR8080, CR8090, CR9090. It details removal and installation procedures for components of the engine, fuel system, cooling system, drivetrain, brakes, hydraulics, electrical systems, operator cab, and attachments. The manual is organized by vehicle system and includes diagrams to aid technicians during repairs. Safety precautions are provided throughout to warn of hazards and best practices when working on the equipment.
New Holland CR8080 Tier 4a Combine Service Repair Manual (Pin YBG115106 and u...f8uusejkddm7u
This service manual provides information on servicing the engine, transmission, axles, brakes, hydraulics, steering, cab climate control, electrical systems, and other components of CNH CR6090, CR7090, CR8080, CR8090, and CR9090 Tier 4a combines. The 3-page table of contents lists over 60 sections covering technical details, specifications, and repair procedures for the various combine systems.
New Holland CR8080 Combine Harvesters Service Repair Manual.pdff8uusejkddm7u
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. The manual provides specifications and repair/replacement procedures for components in these various systems.
New Holland CR6090 Tier 4a Combine Service Repair Manual (Pin YBG115106 and u...f8uusejkddm7u
This service manual provides information for servicing the following models: CR6090, CR7090, CR8080, CR8090, CR9090. It details removal and installation procedures for components of the engine, fuel system, cooling system, drivetrain, brakes, hydraulics, electrical systems, operator cab, and attachments. The manual is organized by vehicle system and includes diagrams to aid technicians during repairs. Safety precautions are provided throughout to warn of hazards and best practices when working on the equipment.
New Holland C238 Tier 4A Compact Track Loader Service Repair Manual.pdff8uusejkddm7u
This document is a service manual for CNH Industrial America LLC's L230 Tier 4A 200 Series Skid Steer Loader and C238 Tier 4A 200 Series Compact Track Loader. It contains sections covering the engine, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety instructions are provided to ensure personal safety when servicing the equipment.
New Holland C190 Compact Track Loader Service Repair Manual.pdff8uusejkddm7u
The document is a repair manual for New Holland skid steer loaders and compact track loaders. It provides information on distribution systems, power production systems, power trains, travel systems, body and structure, working arms, tools and couplers. The manual contains technical data, functional descriptions, diagnostic information and service procedures to support maintenance and troubleshooting of the machines. It is organized into sections for different vehicle systems, with chapters for components, and coded information units for easy navigation.
New Holland C185 Compact Track Loader Service Repair Manual.pdff8uusejkddm7u
The document is a repair manual for New Holland skid steer loaders and compact track loaders. It provides information on distribution systems, power production systems, power trains, travel systems, body and structure, working arms, tools and couplers. The manual contains technical data, functional descriptions, diagnostic information and service procedures to support maintenance and troubleshooting of the machines. It is organized into sections for different vehicle systems, with chapters for components, and coded information units for easy navigation.
New Holland Boomer™ 3050 With Hydrostatic or 12x12 Gear Transmission Compact ...f8uusejkddm7u
This document provides instructions for removing the engine from a tractor by separating it from the transmission. Key steps include draining fluids, removing components like the seat, fenders and decks. Wiring is disconnected and the instrument panel is removed. Then roll pins and retaining rings are taken out of the shift shafts to allow separation of the engine and transmission.
More Related Content
Similar to New Holland Boomer™ 3045 With Hydrostatic or 12x12 Gear Transmission Compact Tractor Service Repair Manual.pdf
CASE IH Magnum 315 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfqzje6212365
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to ECM and other modules. Hoses for engine cooling, air conditioning and fuel need to be disconnected as well. All openings need to be plugged after disconnecting lines and hoses.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
This document is a service manual for Magnum tractors models 235, 260, 290, 315, and 340. It contains information on engine systems, transmission, four-wheel drive systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering systems, cab climate control, and electrical systems. Safety precautions and symbols are defined at the beginning.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrjyy35510376
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8dusjkdmmdmd
This document is a service manual for Magnum tractors models 235, 260, 290, 315, and 340. It contains information on engine systems, transmission, four-wheel drive systems, front and rear axle systems, power take-off systems, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering systems, cab climate control, and electrical systems. Safety precautions and symbols are defined at the beginning.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrpoy9396615
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding potential hazards and how to avoid injury or death while operating or servicing the equipment.
CASE IH Magnum 260 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8skjdkdmdmd
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdf8uijfskmdmd
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding safety symbols and precautions to take when operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdfrpoy9396615
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to ECM and other modules. Hoses for engine cooling, air conditioning and fuel need to be disconnected as well.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8skjdkdmdmd
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel and coolant lines. Components that need to be removed include the side shields, hood, batteries, air conditioning components, turbocharger pipes, wiring connectors to ECM and other modules. Hoses for engine cooling, air conditioning and fuel need to be disconnected as well.
CASE IH Magnum 290 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdffujkemmdmd4e
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
CASE IH Magnum 340 Tractor Service Repair Manual (PIN ZBRD07000 and after).pdff8useujdkdm
This document is a service manual for Magnum tractors 235, 260, 290, 315, and 340. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic systems, hitches and couplings, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety information is provided at the beginning regarding potential hazards and how to avoid injury or death while operating or servicing the equipment.
CASE IH Magnum 235 Tractor Service Repair Manual Instant Download [ZBRD07000 ...jiaohui4482378
The document provides instructions to remove an engine from a tractor. It involves disconnecting various engine components like hoses, wiring harnesses, fuel lines and other connections. The engine removal requires draining fluids, removing shields, disconnecting batteries and disengaging over 20 connection points before the engine can be lifted out. Proper precautions like capping fittings and plugging lines are mentioned.
Similar to New Holland Boomer™ 3045 With Hydrostatic or 12x12 Gear Transmission Compact Tractor Service Repair Manual.pdf (14)
New Holland CR7090 Tier 4a Combine Service Repair Manual (Pin YBG115106 and u...f8uusejkddm7u
This service manual provides information for servicing the following models: CR6090, CR7090, CR8080, CR8090, CR9090. It details removal and installation procedures for components of the engine, fuel system, cooling system, drivetrain, brakes, hydraulics, electrical systems, operator cab, and attachments. The manual is organized by vehicle system and includes diagrams to aid technicians during repairs. Safety precautions are provided throughout to warn of hazards and best practices when working on the equipment.
New Holland CR8080 Tier 4a Combine Service Repair Manual (Pin YBG115106 and u...f8uusejkddm7u
This service manual provides information on servicing the engine, transmission, axles, brakes, hydraulics, steering, cab climate control, electrical systems, and other components of CNH CR6090, CR7090, CR8080, CR8090, and CR9090 Tier 4a combines. The 3-page table of contents lists over 60 sections covering technical details, specifications, and repair procedures for the various combine systems.
New Holland CR8080 Combine Harvesters Service Repair Manual.pdff8uusejkddm7u
This document is a service manual for CNH Industrial combine and tractor models CR8070, CR8080, CR9070, CR9080, CR9090, CX7080, CX7090, CX8070, CX8080, and CX8090. It contains sections covering the engine, transmission, axles, hydraulic and electrical systems, cab climate control, and attachments. The manual provides specifications and repair/replacement procedures for components in these various systems.
New Holland CR6090 Tier 4a Combine Service Repair Manual (Pin YBG115106 and u...f8uusejkddm7u
This service manual provides information for servicing the following models: CR6090, CR7090, CR8080, CR8090, CR9090. It details removal and installation procedures for components of the engine, fuel system, cooling system, drivetrain, brakes, hydraulics, electrical systems, operator cab, and attachments. The manual is organized by vehicle system and includes diagrams to aid technicians during repairs. Safety precautions are provided throughout to warn of hazards and best practices when working on the equipment.
New Holland C238 Tier 4A Compact Track Loader Service Repair Manual.pdff8uusejkddm7u
This document is a service manual for CNH Industrial America LLC's L230 Tier 4A 200 Series Skid Steer Loader and C238 Tier 4A 200 Series Compact Track Loader. It contains sections covering the engine, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety instructions are provided to ensure personal safety when servicing the equipment.
New Holland C190 Compact Track Loader Service Repair Manual.pdff8uusejkddm7u
The document is a repair manual for New Holland skid steer loaders and compact track loaders. It provides information on distribution systems, power production systems, power trains, travel systems, body and structure, working arms, tools and couplers. The manual contains technical data, functional descriptions, diagnostic information and service procedures to support maintenance and troubleshooting of the machines. It is organized into sections for different vehicle systems, with chapters for components, and coded information units for easy navigation.
New Holland C185 Compact Track Loader Service Repair Manual.pdff8uusejkddm7u
The document is a repair manual for New Holland skid steer loaders and compact track loaders. It provides information on distribution systems, power production systems, power trains, travel systems, body and structure, working arms, tools and couplers. The manual contains technical data, functional descriptions, diagnostic information and service procedures to support maintenance and troubleshooting of the machines. It is organized into sections for different vehicle systems, with chapters for components, and coded information units for easy navigation.
New Holland Boomer™ 3050 With Hydrostatic or 12x12 Gear Transmission Compact ...f8uusejkddm7u
This document provides instructions for removing the engine from a tractor by separating it from the transmission. Key steps include draining fluids, removing components like the seat, fenders and decks. Wiring is disconnected and the instrument panel is removed. Then roll pins and retaining rings are taken out of the shift shafts to allow separation of the engine and transmission.
New Holland BR6090 Round Balers Service Repair Manual.pdff8uusejkddm7u
This document is a service manual for BR6080 and BR6090 balers. It contains sections on hydraulic, pneumatic, electrical, electronic and other systems of the balers. The introduction provides information on how to use the manual, which is coded using an Integrated Coding Environment to classify repair operations by location, type of information, and product. It outlines the manual's structure and explains the coding references. Basic safety rules are also listed, such as working on stopped equipment and wearing protective equipment.
New Holland BR6080 Round Balers Service Repair Manual.pdff8uusejkddm7u
This document is a service manual that provides technical information for BR6080 and BR6090 balers. It contains sections on hydraulic, pneumatic, electrical, electronic and other systems of the balers. The manual provides information on maintenance, repair, troubleshooting and specifications for the various components and systems. Safety rules and precautions for working on the balers are also included at the beginning.
New Holland Boomer™ 3040 With Hydrostatic or 12x12 Gear Transmission Compact...f8uusejkddm7u
This service manual provides technical information for servicing the Boomer 3040, 3045, and 3050 compact tractors. It includes sections on the engine, transmission, axles, hydraulics, electrical systems, and other components. Safety is emphasized throughout, with precautionary statements to avoid hazardous conditions that could cause injury or death. The manual instructs technicians on proper maintenance and repair procedures.
New Holland B115 Backhoe Loader Service Repair Manual.pdff8uusejkddm7u
This manual provides technical information for repairing and servicing a machine. It contains sections on safety precautions, maintenance, technical specifications, and repair procedures for components like the transmission and front axles. The manual is intended for a skilled engineer and advises reading it carefully to obtain correct information on repair procedures. It covers loader backhoe models B110-B115 with various configurations like powershift, powershuttle, 4WD, stabilizer options, and engine types.
New Holland B110 Backhoe Loader Service Repair Manual.pdff8uusejkddm7u
This manual provides technical information for repairing and servicing a machine. It contains sections on safety precautions, maintenance, technical specifications, and repair procedures for components like the transmission and front axles. The manual is intended for a skilled engineer and advises reading it carefully to obtain correct information on repair procedures. It covers loader backhoe models B110-B115 with various configurations like powershift, powershuttle, 4WD, stabilizer options, and engine types.
New Holland EH45 Compact Excavator Service Repair Manual.pdff8uusejkddm7u
This document is a service manual for an EH45 compact excavator. It contains 7 sections covering specifications, maintenance, systems, disassembly, troubleshooting, engine, and miscellaneous topics. The manual provides safety information and precautions for operating and servicing the excavator. It warns of hazards from high pressure fluids and rotating parts, and advises lowering attachments and blocking the machine before performing any maintenance.
New Holland E385C Crawler Excavator Service Repair Manual.pdff8uusejkddm7u
This document provides safety information and instructions for operating an E385C crawler excavator. It contains multiple warnings about ensuring safe operation of the machine and attachments. Proper personal protective equipment should be worn. Operators must understand all safety signs and procedures before starting work. Care is needed when operating near edges, slopes, obstacles or other hazards. Loads must not exceed the machine's capacity.
New Holland E485C Crawler Excavator Service Repair Manual.pdff8uusejkddm7u
The document is a service manual that provides maintenance and repair instructions for an E485C crawler excavator engine. It contains detailed sections on the engine components, systems and specifications. The sections cover topics such as the engine and crankcase, valve drive and gears, cylinder heads, connecting rods and pistons, crankshaft and flywheel, fuel systems, cooling systems, lubrication systems and electrical systems. It also includes information on removal and installation procedures, component identification diagrams and specifications.
New Holland E385C Tier IV Crawler Excavator Service Repair Manual.pdff8uusejkddm7u
This document provides safety information and precautions for operating a crawler excavator. It contains sections on general safety information, safety precautions, and safety decals. The general safety section outlines rules for reading manuals, unauthorized operation, personal protective equipment, falling, slipping hazards, loading capacities, pre-start checks, refueling safely, and operating safely. It stresses following all safety procedures to avoid accidents and injuries.
New Holland E225BSR ROPS Tier III Crawler Excavator Service Repair Manual.pdff8uusejkddm7u
This document provides guidelines and safety precautions for repairing and maintaining an excavator. It discusses preparing for disassembly, safety during disassembly and reassembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. Measurement units used are also defined. The document is organized into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation. It is intended as a technical reference for repair and maintenance work.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
6. INTRODUCTION
Foreword
This service manual provides the technical information needed to properly service the NEW HOLLAND AGRICUL-
TURE Boomer 3040, 3045, and 3050 model tractors. Use this manual in conjunction with the operator's manual for
complete operation, adjustment, and maintenance information
On NEW HOLLAND AGRICULTURE equipment, left and right are determined by standing behind the unit, looking in
the direction of travel.
84242309 07/08/2012
3
7. INTRODUCTION
Safety rules
PRECAUTIONARY STATEMENTS
Personal Safety
Throughout this manual and on machine signs, you will find precautionary statements ("DANGER", "WARNING", and
"CAUTION") followed by specific instructions. These precautions are intended for the personal safety of you and
those working with you. Please take the time to read them.
DANGER
This word "DANGER" indicates an immediate hazardous situation that, if not avoided, will result in death or
serious injury. The color associated with Danger is RED.
M1169
WARNING
This word "WARNING" indicates a potentially hazardous situation that, if not avoided, could result in death
or serious injury. The color associated with Warning is ORANGE.
M1170
CAUTION
This word "CAUTION" indicates a potentially hazardous situation that, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices. The color associated with Caution is
YELLOW .
M1171
FAILURE TO FOLLOW THE "DANGER", "WARNING", AND "CAUTION" INSTRUCTIONS MAY
RESULT IN SERIOUS BODILY INJURY OR DEATH.
Machine Safety
The precautionary statement ("IMPORTANT") is followed by specific instructions. This statement is intended for ma-
chine safety.
NOTICE: The word "IMPORTANT" is used to inform the reader of something they need to know to prevent minor
machine damage if a certain procedure is not followed.
Information
NOTE: Instructions used to identify and present supplementary information.
LEGAL OBLIGATIONS
This machine may be equipped with special guarding or other devices in compliance with local legislation. Some of
these require active use by the operator. Therefore, check local legislation on the usage of this machine.
ACCIDENT PREVENTION
Most accidents or injuries that occur in workshops are the result of a non compliance to simple and fundamental
safety regulations. For this reason, IN MOST CASES THESE ACCIDENTS CAN BE AVOIDED by foreseeing possible
causes and consequently acting with the necessary caution and care.
Accidents may occur with all types of machines, regardless of how well the machine in question was designed and
built.
A careful and informed service technician is the best guarantee against accidents.
Decisive awareness of the most basic safety rule is normally sufficient to avoid many serious accident.
84242309 07/08/2012
4
8. INTRODUCTION
DANGER
Shut down the machine, remove key, be sure all moving parts have stopped and all pressure in the systems
is relieved before cleaning, adjusting or lubricating the equipment. Failure to comply will result in death or
serious injury.
M871
SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND COMPONENTS - HY-
DRAULICS (EUROPEAN STANDARD PR EM 982)
Flexible hose assemblies must not be constructed from hoses which have been previously used as part of a hose
assembly.
Do not weld hydraulic piping.
When flexible hoses or piping are damaged, replace them immediately.
It is forbidden to modify a hydraulic accumulator by machining, welding or any other means.
Before removing hydraulic accumulators for servicing, the liquid pressure in the accumulators must be reduced to
zero.
Pressure check on hydraulic accumulators shall be carried out by method recommended by the accumulator manu-
facturer.
Care must be taken not to exceed the maximum allowable pressure of the accumulator. After any check or adjustment
there must be no leakage of gas.
SAFETY RULES
A careful operator is the best operator. Most accidents
can be avoided by observing certain precautions. To
help prevent accidents, read and take the following
precautions before operating this tractor. Equipment
should be operated only by those who are responsible
and instructed to do so.
THE TRACTOR
1. Read the Operator's Manual carefully before using the tractor. Lack of operating knowledge can lead to acci-
dents.
2. Use an approved roll bar and seat belt for safe operation. Overturning a tractor without a roll bar can result in
death or injury. If your tractor is not equipped with a roll bar and seat belt, see your NEW HOLLAND AGRICUL-
TURE Dealer.
3. Always use the seat belt. The only instance when the seat belt should not be used is if the roll bar has been
removed from the tractor or folding ROPS is in down position.
4. If a front end loader is to be installed, always use a FOPS (Falling Object Protective Structure) canopy to avoid
injury from falling objects.
5. Use the handholds and step plates when getting on and off the tractor to prevent falls. Keep steps and platform
cleared of mud and debris.
6. Do not permit anyone but the operator to ride on the tractor. There is no safe place for extra riders.
7. Keep all safety decals clean of dirt and grime, and replace all missing, illegible, or damaged safety decals. See
the list of decals in the Decal section of this manual.
SERVICING THE TRACTOR
1. The cooling system operates under pressure which is controlled by the radiator cap. It is dangerous to remove
the cap while the system is hot. Always turn the cap slowly to the first stop and allow pressure to escape before
removing the cap entirely.
2. Keep any type of open flame away from the tractor and do not smoke while refueling.Wait for the engine to cool
before refueling.
3. Keep the tractor and equipment, particularly brakes and steering, maintained in a reliable and satisfactory con-
dition to ensure your safety and comply with legal requirements.
4. Keep open flame or cold weather starting aids away from the battery to prevent fires or explosions. Use jumper
cables according to instructions to prevent sparks which could cause explosion.
84242309 07/08/2012
5
9. INTRODUCTION
5. Stop the engine before performing any service on the tractor.
6. Escaping hydraulic/diesel fluid under pressure can penetrate the skin causing serious injury. If fluid is injected
into the skin, obtain medical attention immediately or gangrene may result.
• DO NOT use your hand to check for leaks.
• Use a piece of cardboard or paper to search for leaks.
• Stop the engine and relieve pressure before connecting or disconnecting lines.
• Tighten all connections before starting the engine or pressurizing lines.
7. Do not modify or permit anyone else to modify or alter this tractor or any of its components or functions without
first consulting a NEW HOLLAND AGRICULTURE Dealer.
8. The fuel oil in the injection system is under high pressure and can penetrate the skin. Unqualified persons
should not remove or attempt to adjust a pump, injector, nozzle, or any other part of the fuel injection system.
Failure to follow these instructions can result in serious injury.
9. Continuous long-term contact with used engine oil may cause skin cancer. Avoid prolonged contact with used
engine oil.Wash skin promptly with soap and water.
10. Some components of your tractor, such as gaskets and friction surfaces (brake linings, clutch linings, etc.) may
contain asbestos. Breathing asbestos dust is dangerous to your health. You are advised to have any main-
tenance or repair on such components carried out by an authorized NEW HOLLAND AGRICULTURE Dealer.
However, if service operations are to be undertaken on parts that contain asbestos, the essential precautions
listed below must be observed:
• Work out of doors or in a well ventilated area.
• Dust found on the tractor or produced during work on the tractor should be removed by extraction, not by
blowing.
• Dust waste should be dampened, placed in a sealed container, and marked to ensure safe disposal.
• If any cutting, drilling, etc. is attempted on materials containing asbestos, the item should be dampened
and only hand tools or low speed power tools used.
OPERATING THE TRACTOR
1. Before starting the tractor, apply the parking brake, place the PTO lever in the 'OFF' position, the lift control lever
in the down position, the remote control valve levers in the neutral position, and the transmission in neutral.
2. Always sit in the tractor seat when starting the engine or operating controls. Do not start the engine or operate
controls while standing beside the tractor.
3. Do not bypass the neutral start switches. Consult your NEW HOLLAND AGRICULTURE Dealer if your neutral
start controls malfunction. Use jumper cables only in the recommended manner. Improper use can result in
tractor runaway.
4. Avoid accidental contact with the gear shift lever while the engine is running, as this can cause unexpected
tractor movement.
5. Before getting off the tractor, disengage the PTO, turn the engine off, and apply the parking brake. Never get
off the tractor while it is in motion.
6. Do not park the tractor on a steep incline.
7. Do not operate the tractor engine in an enclosed building without adequate ventilation. Exhaust fumes can
cause death or illness.
8. If the power steering or engine ceases operating, stop the tractor immediately.
9. Pull only from the drawbar or the lower link drawbar in the down position. Use only a drawbar pin that locks in
place. Pulling from the tractor rear axle or any point above the axle may cause the tractor to upset.
10. 1If the front end of the tractor tends to rise when heavy implements are attached to the three-point hitch, install
front end or front wheel weights. Do not operate the tractor with a light front end.
11. Always set the hydraulic selector lever in position control when attaching or transporting equipment. Ensure hy-
draulic couplers are properly mounted and will disconnect safely in case of accidental detachment of implement
12. Do not leave equipment in the raised position.
13. Use the flasher/turn signal lights and SMV signs when traveling on public roads both day and night (unless
prohibited by law).
84242309 07/08/2012
6
11. Engine - Engine and crankcase
Engine - Remove Separating the Tractor at the Clutch
Housing/Engine - 12x12 Transmission
Prior operation:
Cylinder head - Compression test (10.101).
Removal
1. Remove the negative (-) battery cable (1), and the
positive (+) battery cable (2), from the battery.
2. Drain all of the hydraulic fluid from the transmission
and the differential into a suitable container.
3. Disconnect the headlight wire harness plug and re-
move the hood from the tractor.
4. Remove the seat, and the seat base assembly from
the tractor.
5. Remove the light bars from the fenders and the
ROPS.
30997558A 1
6. If equipped, remove the remote loader control valve
(1), and the connecting hydraulic tubes from the right
fender.
7. Remove the left-hand and right-hand fenders from
the tractor.
30997555A 2
8. Remove the left-hand (1), and right-hand (2), rear
hood side panels.
9. Disconnect and remove the throttle cable from the
foot throttle control pedal, located on the right deck.
10. Remove the left and the right deck from the tractor.
11. Disconnect the throttle cable from the dash mounted
throttle control lever.
10000864 3
84242309 07/08/2012
10.001 / 8
12. Engine - Engine and crankcase
12. Loosen and remove the two or four instrument panel
retaining screws (1). Remove the instrument panel
(2), from the dash housing. Disconnect the wiring
connector from the instrument panel. (Refer to figure
4 for 12 x 12 transmission panel and figure 5 for HST
transmission panel).
76075175 4
10034980 5
13. Drive the roll pin (1), from the lower shuttle shift shaft
(2). Remove the retaining ring (3), and the roll pin (4),
from the lower main shift shaft (5). Loosen and re-
move the retaining bolts (6), securing the main shift
bracket (7), and the shuttle shift bracket (8), to the
steering column (9). Remove the shift shaft assem-
blies by feeding the control levers down through the
dash housing.
14. Remove the dash housing from the firewall. Discon-
nect the wiring connectors from the dash switches.
15. Disconnect the main wiring harness connector.
10996566 6
84242309 07/08/2012
10.001 / 9
13. Engine - Engine and crankcase
16. Remove the firewall support bracket (1), from the fire-
wall (2), and the clutch housing (3).
20000908 7
17. Remove the hydraulic system inlet tube (1) from the
hydraulic pump (2).
18. Remove the hydraulic system pressure tube (3), from
the hydraulic pump (2), and the diverter valve.
76075731 8
19. Disconnect the wires (1), on the starter (2), and re-
move the starter from the tractor.
30997565 9
84242309 07/08/2012
10.001 / 10
14. Engine - Engine and crankcase
20. If equipped with FWD, remove the roll pins (1), from
the front and rear of the FWD driveshaft (2), and re-
move the driveshaft from the tractor.
21. Drain the engine oil into a suitable container and re-
move the oil filter.
20000904 10
22. Remove the fuel supply (1), and return (2), lines from
the fuel filter (3).
23. Drain the fuel tank into a suitable container.
76075737 11
24. Attach a chain sling (1), to the two hoist eyes (2) and
(3), on the engine.
76075738 12
25. Attach a suitable hoist (1), to the chain sling (2).
NOTE: The hoist is used for supporting the engine and axle
assembly, not for lifting.
26. Roll a floor jack under the tractor from the rear of the
tractor, and place under the clutch housing. Raise
the jack enough to support the drive train.
76075739 13
84242309 07/08/2012
10.001 / 11
15. Engine - Engine and crankcase
27. Remove the buckle-up bolts (1), that secure the en-
gine (2), to the clutch housing (3).
NOTE: The hoist and/or the floor jack may need to be
raised or lowered to allow the separation of the engine from
the clutch housing.
28. Carefully roll the drive train away from the engine,
using the floor jack for support.
20000905 14
Next operation:
Engine - Remove Separating the Tractor at the Engine/Frame (10.001).
84242309 07/08/2012
10.001 / 12
16. Engine - Engine and crankcase
Engine - Remove Separating the Tractor at the Engine/Frame
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
W0398A
Prior operation:
Engine - Remove Separating the Tractor at the Clutch Housing/Engine - 12x12 Transmission (10.001).
1. Use jack stands under the frame rails to support the
front frame/engine assembly.
2. Remove the chain sling from the two hoist eyes on
the engine.
10000870 1
3. Remove the power steering lines (1), from the power
steering control motor (2), the frame (3), and the
power steering pump (4).
76075732 2
84242309 07/08/2012
10.001 / 13
17. Engine - Engine and crankcase
4. Remove the air cleaner assembly (1), from the fire-
wall (2).
20002366 3
5. Remove the muffler guard (1), from the tractor.
30996394 4
6. Remove the muffler (1), and the exhaust pipe (2),
from the tractor.
7. Drain the coolant from the radiator into a suitable
container.
8. Remove the top and the bottom radiator hoses.
9. Remove the radiator and the oil cooler (if equipped)
from the tractor.
20002367 5
10. Remove the firewall (1), and the air cleaner mounting
bracket (2), from the engine.
11. Attach a chain sling to the two hoist eyes on the en-
gine.
12. Attach a suitable hoist to the chain sling, and raise
the hoist enough to support the engine.
20002370 6
84242309 07/08/2012
10.001 / 14
18. Engine - Engine and crankcase
13. Loosen and remove the engine mounting bolts (1),
on both sides of the frame.
14. Carefully lift the engine from the frame.
15. Attach the engine to a suitable engine stand.
16. With the engine securely attached to the engine
stand, remove the chain sling from the two engine
hoist eyes.
20002365 7
Next operation:
Engine - Install - To Frame (10.001).
84242309 07/08/2012
10.001 / 15
19. Engine - Engine and crankcase
Engine - Install - To Frame
Prior operation:
Engine - Remove Separating the Tractor at the Engine/Frame (10.001).
1. Attach a chain sling to the two hoist eyes on the en-
gine.
2. Attach a suitable hoist to the chain sling and raise the
hoist enough to support the engine.
3. Remove the engine from the engine stand.
4. Using the hoist, position the engine in the frame,
aligning the mounting holes in the frame with the
mounting holes in the engine.
5. Install the engine mounting bolts (1), on both sides
of the frame. Tighten the mounting bolts to 139 - 175
N·m (102 - 129 lb ft).
6. With the engine securely installed into the frame, re-
move the chain sling from the two engine hoist eyes.
20002365 1
7. Install the firewall (1), and the air cleaner mounting
bracket (2), onto the engine.
8. Install the radiator and the oil cooler (if equipped)
onto the tractor frame.
9. Install the top and bottom radiator hoses.
10. Fill the radiator with new coolant to the proper level.
20002370 2
11. Install the muffler (1), onto the exhaust manifold, and
attach the exhaust pipe (2), onto the muffler.
20002367 3
84242309 07/08/2012
10.001 / 16
20. Engine - Engine and crankcase
12. Install the muffler guard (1), on the tractor.
30996394A 4
13. Install the air cleaner assembly (1), on the firewall (2),
and connect the air inlet hose to the air inlet manifold
pipe.
20002366 5
14. Connect the power steering tubes (1), to the power
steering control motor (2), the frame (3), and the
power steering pump (4).
76075732 6
Next operation:
Engine - Install - Attaching the 12x12 Transmission to the Engine (10.001).
84242309 07/08/2012
10.001 / 17
21. Engine - Engine and crankcase
Engine - Install - Attaching the 12x12 Transmission to the Engine
Prior operation:
Engine - Remove Separating the Tractor at the Engine/Frame (10.001).
NOTICE: Do not use the buckle-up bolts to draw the drive train together with the engine. Severe damage to the drive
train may result.
1. Attach a chain sling (1), to the two hoist eyes (2) and
(3), on the engine.
76075738 1
2. Attach a suitable hoist (1), to the chain sling (2).
3. Carefully roll the drive train into alignment with the
engine. Align the splines on the 12x12 input shaft
with the clutch and the engine flywheel. Rotate the
engine fan to align the input shaft and the clutch/
flywheel. The floor jack or the hoist may need to be
raised or lowered to make alignment possible.
76075739 2
4. Connect the clutch housing (3), to the engine (2), and
install the buckle-up bolts (1). Tighten the buckle-up
bolts in a criss-cross pattern. Torque the M10 bolts
and nuts to 43.4 - 55.6 N·m (32 - 41 lb ft)Torque the
two M12 bolts to 81.3 N·m (60 lb ft).
20000905 3
84242309 07/08/2012
10.001 / 18
22. Engine - Engine and crankcase
5. Remove the chain hoist (1), and the sling (2), from
the engine hoist eyes. Remove the floor jack from
the tractor.
76075739B 4
6. Connect the fuel supply line (1), to the fuel shutoff/
filter (3), and connect the fuel tank vent line (2), to
the tee fitting.
76075737A 5
7. Attach the firewall support (1), to the firewall (2), and
the clutch housing (3). Secure with the retaining
bolts.
20000908 6
84242309 07/08/2012
10.001 / 19
23. Engine - Engine and crankcase
8. If equipped, Install the FWD driveshaft (2), and se-
cure with the two roll pins (1).
20000904 7
9. Install the starter (2), onto the engine, and secure
with the retaining nuts. Connect the wires (1), to the
starter (2).
30997565 8
10. Install the hydraulic system pressure tube (3), on the
hydraulic pump (2), and the diverter valve.
11. Install the hydraulic system inlet tube (1), onto the
hydraulic pump (2), and connect the power steering
return hose (4), to the inlet tube (1).
12. Connect the main wiring harness connector.
13. Install the left-hand and right-hand deck onto the
tractor.
14. Connect the throttle cable to the foot throttle control
lever located on the right deck.
15. Install the left-hand and right-hand fenders on the
tractor.
16. Install the seat and the seat base on the tractor. Con-
nect the seat safety start switch.
17. Install the light bars onto the fenders and the ROPS.
76075731 9
84242309 07/08/2012
10.001 / 20
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
18. If equipped, install the remote loader control valve
(1), on the right fender. Connect the hydraulic tubes.
19. Install the dash housing onto the tractor.
20. Connect the wiring connectors to the dash housing
switches.
21. Connect the throttle cable to the dash mounted throt-
tle control lever.
30997555A 10
22. Connect the instrument panel wiring plug to the in-
strument panel. Install the instrument panel (2), into
the dash housing and secure with screws (1).Refer
to figure 11 for HST panel . Refer to figure 12 , for
12 x 12 transmission panel.
10034980 11
76075175 12
84242309 07/08/2012
10.001 / 21
26. Engine - Engine and crankcase
23. Install the main shift and the shuttle shift control
levers through the dash housing, and connect the
main shift bracket (7), and the shuttle shift bracket
(8), to the steering column (9), with the retaining
bolts (6). Connect the lower main shift shaft (5), and
shuttle shift shaft (2) to the transmission shafts with
the roll pins (4) and (1), and retaining ring (3).
24. Install the hood on the tractor and connect the head-
light wiring connector.
10996566 13
25. Install the left-hand (1), and right-hand (2), rear hood
side panels.
26. Fill the hydraulic reservoir with NEW HOLLAND
AMBRA MULTI G 134™ HYDRAULIC TRANSMISSION
OIL Hydraulic Fluid, to the proper level.
27. If the engine oil was drained, and the oil filter was
removed during disassembly, install a new oil filter on
the engine, and fill the engine with the recommended
oil to the proper level.
10000864 14
28. Connect the positive (+) (2), and the negative (-) (1),
battery cables to the battery.
29. Check the fluid levels and start the tractor. Check for
leaks and proper operation of all systems.
30. Make any adjustments necessary for proper opera-
tion of the tractor.
30997558A 15
Next operation:
Engine - Disassemble (10.001).
84242309 07/08/2012
10.001 / 22
27. Engine - Engine and crankcase
Engine - Disassemble
Prior operation:
Engine - Remove Separating the Tractor at the Engine/Frame (10.001).
1. Fan, Water Pump, and External Oil Tube - Removal
1. Remove the fan and water pump assembly.
See "Fan Removal" and "Water Pump Re-
moval".
2. Remove the external oil transfer tube banjo bolt
(1), from the front of the cylinder head.
19988040 1
2. Intake manifold - Remove (10.254).
3. Rocker Arm Shaft and Support Bracket - Removal
1. Remove the bolts (2), and nuts (3).
2. Remove the rocker arm shaft and support
bracket as an assembly (1).
NOTE: Alternately loosen the rocker support bolts a turn at
a time to prevent distorting the rocker shaft.
10044354 2
4. Cylinder head - Remove (10.101).
5. Valve Tappet - Removal
• Remove the valve tappets (1), from the ma-
chined bore in the cylinder block.
20093362 3
84242309 07/08/2012
10.001 / 23