This document provides service information for New Holland B95C, B95C LR, B95C TC, and B110C tractor loader backhoes, including specifications for the Tier 4B compliant engines. The engines are 4-cylinder turbocharged diesel engines with direct fuel injection. Engine details and specifications are provided for the B95C and B110C models. The document also contains sections covering the transmission, axle systems, brakes, hydraulics, electrical systems, and other components.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...ufjsjekskem
This document provides instructions to remove the engine from Case IH Magnum tractors. Key steps include disconnecting batteries, air intake lines, cooling systems, refrigerant lines, fuel lines, electrical harnesses, and removing mounting brackets and covers. Proper lifting equipment is required to remove heavy components like the diesel particulate filter. Disconnecting all auxiliary components, hoses, and wiring is critical to fully removing the engine.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
This document provides instructions to remove the engine from Case IH Magnum tractors. Key steps include disconnecting battery, air intake lines, cooling system, refrigerant lines, diesel exhaust fluid lines, fuel lines, electrical harnesses, and removing mounting brackets and covers. Proper lifting equipment is required to remove heavy components like the diesel particulate filter. Disconnecting all ancillary systems, electrical connections, and mounting hardware is required before removing the entire engine.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...fujsjefksekmfm
This document is a service manual for Case IH Magnum tractors containing model years 180, 200, 220, and 240. It provides information on the tractor systems, components, and troubleshooting codes. The manual includes 21 sections covering the engine, transmission, axles, hydraulics, electrical systems, and more. It is copyrighted by CNH Industrial America LLC and intended for technicians servicing Case IH tractors.
2014 hino 338 series truck service repair manualfujsjefksekmfm
This document provides information and guidelines for repairing Hino Trucks, including the Hino 238, 258LP, 268, 338, 358 series equipped with J08E-VB and J08E-WU engines. It discusses general precautions for safety when working on vehicles and provides identification information. It also outlines how to use the workshop manual and specifies torque values for bolts and nuts. The document provides recommendations for lubricants and lifting locations when working under the vehicle. It includes an information display and instructions for symptom simulation. Chapter references are also included to direct the user to the appropriate section for their vehicle.
2001 hino sg series truck service repair manualfujsjefksekmfm
This document provides information on identifying Hino diesel trucks models FD, FE, FF, and SG from 2001. It discusses locating and interpreting the vehicle identification number (VIN), engine number, chassis number, and vehicle certification label. The VIN is a 17-digit code that includes information on the manufacturer, model, engine, weight rating, and other specifications. The engine and chassis numbers provide additional identification.
New holland vn2080 grape harvester service repair manualfujsjefksekmfm
(1) The document provides specifications for a self-propelled grape harvester model VN2080, including two variants.
(2) It lists technical details such as dimensions, weights, engine specifications, hydraulic system components, and performance limits on slopes and tilting.
(3) The specifications are intended to inform maintenance, repair, and operation of the harvester.
New holland vl5060 grape harvester service repair manualfujsjefksekmfm
This document contains service manual information for various grape harvester models, including specifications. It provides machine dimensions, engine and harvesting equipment specifications for models VL6040 through VL6090 and VM4090. It also provides specifications for smaller models VL5090, VL5080, VL5060, VM3080, VM3090, and VN2090. Dimensions include heights, lengths, widths and other physical attributes of the various machines.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...ufjsjekskem
This document provides instructions to remove the engine from Case IH Magnum tractors. Key steps include disconnecting batteries, air intake lines, cooling systems, refrigerant lines, fuel lines, electrical harnesses, and removing mounting brackets and covers. Proper lifting equipment is required to remove heavy components like the diesel particulate filter. Disconnecting all auxiliary components, hoses, and wiring is critical to fully removing the engine.
Case ih magnum 180 powershift transmission (pst) tier 4 b tractor service rep...fujsjekfkkseme
This document provides instructions to remove the engine from Case IH Magnum tractors. Key steps include disconnecting battery, air intake lines, cooling system, refrigerant lines, diesel exhaust fluid lines, fuel lines, electrical harnesses, and removing mounting brackets and covers. Proper lifting equipment is required to remove heavy components like the diesel particulate filter. Disconnecting all ancillary systems, electrical connections, and mounting hardware is required before removing the entire engine.
Case ih magnum 180 continuously variable transmission (cvt) tier 4 b tractor ...fujsjefksekmfm
This document is a service manual for Case IH Magnum tractors containing model years 180, 200, 220, and 240. It provides information on the tractor systems, components, and troubleshooting codes. The manual includes 21 sections covering the engine, transmission, axles, hydraulics, electrical systems, and more. It is copyrighted by CNH Industrial America LLC and intended for technicians servicing Case IH tractors.
2014 hino 338 series truck service repair manualfujsjefksekmfm
This document provides information and guidelines for repairing Hino Trucks, including the Hino 238, 258LP, 268, 338, 358 series equipped with J08E-VB and J08E-WU engines. It discusses general precautions for safety when working on vehicles and provides identification information. It also outlines how to use the workshop manual and specifies torque values for bolts and nuts. The document provides recommendations for lubricants and lifting locations when working under the vehicle. It includes an information display and instructions for symptom simulation. Chapter references are also included to direct the user to the appropriate section for their vehicle.
2001 hino sg series truck service repair manualfujsjefksekmfm
This document provides information on identifying Hino diesel trucks models FD, FE, FF, and SG from 2001. It discusses locating and interpreting the vehicle identification number (VIN), engine number, chassis number, and vehicle certification label. The VIN is a 17-digit code that includes information on the manufacturer, model, engine, weight rating, and other specifications. The engine and chassis numbers provide additional identification.
New holland vn2080 grape harvester service repair manualfujsjefksekmfm
(1) The document provides specifications for a self-propelled grape harvester model VN2080, including two variants.
(2) It lists technical details such as dimensions, weights, engine specifications, hydraulic system components, and performance limits on slopes and tilting.
(3) The specifications are intended to inform maintenance, repair, and operation of the harvester.
New holland vl5060 grape harvester service repair manualfujsjefksekmfm
This document contains service manual information for various grape harvester models, including specifications. It provides machine dimensions, engine and harvesting equipment specifications for models VL6040 through VL6090 and VM4090. It also provides specifications for smaller models VL5090, VL5080, VL5060, VM3080, VM3090, and VN2090. Dimensions include heights, lengths, widths and other physical attributes of the various machines.
New holland c185 compact track loader service repair manualfujsjefksekmfm
The document is a repair manual for New Holland construction equipment that provides technical information on distribution systems, power production, power train, travelling systems, body and structure, safety features, working arms, tools and couplers. It contains sections on primary and secondary hydraulic power systems, electrical power systems, lighting systems, engines, fuel systems, cooling systems, transmissions, axles, steering systems, wheels and tracks, user controls, environmental controls, and safety accessories. The manual provides technical specifications, descriptions of how systems function, diagnostic information for troubleshooting, and procedures for removing, installing, and adjusting components.
New holland 9090 x europe f4he9687 grape harvester service repair manualfujsjefksekmfm
This document provides service information for changing the rear track width on a 9090X grape harvester from 160 mm. The procedure involves removing the rear wheel, rear wheel arm fastening bearings, and repositioning the bearings to achieve the desired track width. Spacer rings must be installed correctly and all fasteners torqued to specification.
Case ih rowtrac 350 tier 4 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2013-2023. It provides specifications, maintenance procedures, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components of the tractors. The manual is published by CNH America LLC and is intended to be used by tractor technicians for repair and maintenance.
Case ih quadtrac 600 tier 4 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2013-2023. It provides specifications, maintenance procedures, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components of the tractors. The manual is published by CNH America LLC and is intended to be used by tractor technicians for repair and maintenance.
Case ih quadtrac 500 tier 4 b (final) tractor service repair manual pin jeez0...fujsjefksekmfm
This document is a service manual for Case IH Steiger tractors from model years 370 to 620 that meet Tier 4B emissions standards. It contains information on the engine, transmission, axles, brakes, and other components. The manual provides maintenance and repair instructions for technicians servicing these tractors. It is published by CNH Industrial and copyrighted in 2017.
Case ih quadtrac 500 tier 4 b (final) tractor service repair manual (pin zff3...fujsjefksekmfm
This document is a service manual for Case IH and Steiger tractors that provides information on tractor systems, components, and repair procedures. It includes sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and more. Each section breaks down the components and subsystems in detail for servicing and repair. The manual also includes a product/engine matrix that lists the engine used for each tractor model.
Case ih quadtrac 470 tier 4 b (final) tractor service repair manual pin jeez0...fujsjefksekmfm
This document is a service manual for Case IH Steiger tractors from model years 370 to 620 that meet Tier 4B emissions standards. It contains information on the engine, transmission, axles, brakes, and other components. The manual provides maintenance and repair instructions for technicians servicing these tractors. It is published by CNH Industrial and copyrighted in 2017.
Case ih quadtrac 470 tier 4 b (final) tractor service repair manual (pin zff3...fujsjefksekmfm
This document is a service manual for Case IH and Steiger tractors that provides information on tractor systems, components, and repair procedures. It includes sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and more. Each section breaks down the components and subsystems in detail for servicing and repair. The manual also includes a product/engine matrix that lists the engine used for each tractor model.
Case ih puma 125 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH PUMA tractors. It provides technical specifications and information on the hydraulic, pneumatic, electrical and electronic systems of the tractors, including the primary hydraulic power system, charge pump, hydraulic pump, remote valves and various tractor configurations. The manual is divided into sections covering different tractor systems and functions to aid technicians in maintenance and repairs.
Case ih puma 115 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH PUMA tractors that contains information on the tractor's systems, components, and repair procedures. It includes sections on the tractor's hydraulics, pneumatics, electrics, engine, transmission, axles, brakes, frame, hitch, and troubleshooting codes. The manual is intended to help technicians resolve issues affecting the functions and operation of the tractor.
Case ih mx 215 tractor service repair manualfujsjefksekmfm
This document is a table of contents for an agricultural tractor repair manual. It lists sections that cover topics like general information, maintenance schedules, cooling system removal and installation, engine removal and installation, fuel tank removal and installation, and electrical system diagnostics. The electrical system section provides information on fuse and relay identification, component locations, schematics, and troubleshooting guides for subsystems like charging, lighting, instrumentation, and interior features. Reference publication numbers are provided for additional engine repair information.
Case ih maxxum pro series 115 tractor service repair manualfujsjefksekmfm
This document provides information for repair manuals regarding MXU Value and Limited Series and MAXXUM Value and Pro Series tractors. It includes:
- An overview of the manual sections for various tractor systems and components.
- Notification that some Maxxum models are covered using the corresponding MXU model numbers.
- Details about updated controller identification codes and the new location of the diagnostic connector for Maxxum tractors.
- Safety and precautionary statements to follow when working on the tractors.
Case ih maxxum pro series 110 tractor service repair manualfujsjefksekmfm
This document provides safety information and specifications for MXU Value and Limited Series tractors and Maxxum Value and Pro Series tractors. It contains warnings about following safety precautions when working on the tractors to avoid injury. The document lists dimensions and specifications for the different tractor models. It also provides the minimum tightening torques that should be used for hardware.
Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manualfujsjefksekmfm
This document is a service manual for MAXXUM tractors that provides technical information on the tractor systems and components. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, and electrical systems. Each section contains technical specifications, operational descriptions, diagnostic codes, and service procedures. The manual is intended to support maintenance and repair of MAXXUM tractors by qualified dealership personnel.
Case ih maxxum 110 multicontroller ep tier 4 a tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih maxxum 110 ep tier 4 a tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih magnum 340 rowtrac powershift transmission (pst) tier 4 b tractor ser...fujsjefksekmfm
This service manual provides information for servicing the Magnum 250, 280, 310, and 340 tractors and their tier 4B engines. It covers the engine and related systems, transmission, axles, hydraulics, electrical systems, and more. Specific procedures and components are identified for the Magnum tractors, which have some differences from other CNH products using similar engines.
Case ih magnum 305 tractor service repair manualfujsjefksekmfm
This document is the table of contents for a tractor repair manual. It lists sections that cover topics like general information, maintenance schedules, cooling system removal and installation, engine removal and installation, electrical systems, and power train systems. The electrical systems section provides schematics, component locations, and troubleshooting information for systems like power distribution, charging, lighting, instrumentation, and starting. The power train section covers the transmission system.
1982 johnson evinrude outboard 7.5 hp service repair manualfujsjefksekmfm
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
1982 johnson evinrude outboard 6 hp service repair manualfujsjefksekmfm
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
New holland c185 compact track loader service repair manualfujsjefksekmfm
The document is a repair manual for New Holland construction equipment that provides technical information on distribution systems, power production, power train, travelling systems, body and structure, safety features, working arms, tools and couplers. It contains sections on primary and secondary hydraulic power systems, electrical power systems, lighting systems, engines, fuel systems, cooling systems, transmissions, axles, steering systems, wheels and tracks, user controls, environmental controls, and safety accessories. The manual provides technical specifications, descriptions of how systems function, diagnostic information for troubleshooting, and procedures for removing, installing, and adjusting components.
New holland 9090 x europe f4he9687 grape harvester service repair manualfujsjefksekmfm
This document provides service information for changing the rear track width on a 9090X grape harvester from 160 mm. The procedure involves removing the rear wheel, rear wheel arm fastening bearings, and repositioning the bearings to achieve the desired track width. Spacer rings must be installed correctly and all fasteners torqued to specification.
Case ih rowtrac 350 tier 4 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2013-2023. It provides specifications, maintenance procedures, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components of the tractors. The manual is published by CNH America LLC and is intended to be used by tractor technicians for repair and maintenance.
Case ih quadtrac 600 tier 4 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Rowtrac, Steiger, and Quadtrac tractors from model years 2013-2023. It provides specifications, maintenance procedures, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, and other components of the tractors. The manual is published by CNH America LLC and is intended to be used by tractor technicians for repair and maintenance.
Case ih quadtrac 500 tier 4 b (final) tractor service repair manual pin jeez0...fujsjefksekmfm
This document is a service manual for Case IH Steiger tractors from model years 370 to 620 that meet Tier 4B emissions standards. It contains information on the engine, transmission, axles, brakes, and other components. The manual provides maintenance and repair instructions for technicians servicing these tractors. It is published by CNH Industrial and copyrighted in 2017.
Case ih quadtrac 500 tier 4 b (final) tractor service repair manual (pin zff3...fujsjefksekmfm
This document is a service manual for Case IH and Steiger tractors that provides information on tractor systems, components, and repair procedures. It includes sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and more. Each section breaks down the components and subsystems in detail for servicing and repair. The manual also includes a product/engine matrix that lists the engine used for each tractor model.
Case ih quadtrac 470 tier 4 b (final) tractor service repair manual pin jeez0...fujsjefksekmfm
This document is a service manual for Case IH Steiger tractors from model years 370 to 620 that meet Tier 4B emissions standards. It contains information on the engine, transmission, axles, brakes, and other components. The manual provides maintenance and repair instructions for technicians servicing these tractors. It is published by CNH Industrial and copyrighted in 2017.
Case ih quadtrac 470 tier 4 b (final) tractor service repair manual (pin zff3...fujsjefksekmfm
This document is a service manual for Case IH and Steiger tractors that provides information on tractor systems, components, and repair procedures. It includes sections covering the engine, transmission, axles, brakes, hydraulics, electrical systems, and more. Each section breaks down the components and subsystems in detail for servicing and repair. The manual also includes a product/engine matrix that lists the engine used for each tractor model.
Case ih puma 125 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH PUMA tractors. It provides technical specifications and information on the hydraulic, pneumatic, electrical and electronic systems of the tractors, including the primary hydraulic power system, charge pump, hydraulic pump, remote valves and various tractor configurations. The manual is divided into sections covering different tractor systems and functions to aid technicians in maintenance and repairs.
Case ih puma 115 tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH PUMA tractors that contains information on the tractor's systems, components, and repair procedures. It includes sections on the tractor's hydraulics, pneumatics, electrics, engine, transmission, axles, brakes, frame, hitch, and troubleshooting codes. The manual is intended to help technicians resolve issues affecting the functions and operation of the tractor.
Case ih mx 215 tractor service repair manualfujsjefksekmfm
This document is a table of contents for an agricultural tractor repair manual. It lists sections that cover topics like general information, maintenance schedules, cooling system removal and installation, engine removal and installation, fuel tank removal and installation, and electrical system diagnostics. The electrical system section provides information on fuse and relay identification, component locations, schematics, and troubleshooting guides for subsystems like charging, lighting, instrumentation, and interior features. Reference publication numbers are provided for additional engine repair information.
Case ih maxxum pro series 115 tractor service repair manualfujsjefksekmfm
This document provides information for repair manuals regarding MXU Value and Limited Series and MAXXUM Value and Pro Series tractors. It includes:
- An overview of the manual sections for various tractor systems and components.
- Notification that some Maxxum models are covered using the corresponding MXU model numbers.
- Details about updated controller identification codes and the new location of the diagnostic connector for Maxxum tractors.
- Safety and precautionary statements to follow when working on the tractors.
Case ih maxxum pro series 110 tractor service repair manualfujsjefksekmfm
This document provides safety information and specifications for MXU Value and Limited Series tractors and Maxxum Value and Pro Series tractors. It contains warnings about following safety precautions when working on the tractors to avoid injury. The document lists dimensions and specifications for the different tractor models. It also provides the minimum tightening torques that should be used for hardware.
Case ih maxxum cvt 145 tier 4 b (final) tractor service repair manualfujsjefksekmfm
This document is a service manual for MAXXUM tractors that provides technical information on the tractor systems and components. It includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulics, hitches, frames, steering, wheels, and electrical systems. Each section contains technical specifications, operational descriptions, diagnostic codes, and service procedures. The manual is intended to support maintenance and repair of MAXXUM tractors by qualified dealership personnel.
Case ih maxxum 110 multicontroller ep tier 4 a tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih maxxum 110 ep tier 4 a tractor service repair manualfujsjefksekmfm
This document is a service manual for Case IH Maxxum tractors covering models MAXXUM 110 EP through MAXXUM 140 EP and MAXXUM CVT 110 through MAXXUM CVT 130. The manual contains specifications, diagrams, and repair procedures for the engine, transmission, hydraulics, electrical systems, and other components. It is intended as a reference for technicians servicing these tractor models.
Case ih magnum 340 rowtrac powershift transmission (pst) tier 4 b tractor ser...fujsjefksekmfm
This service manual provides information for servicing the Magnum 250, 280, 310, and 340 tractors and their tier 4B engines. It covers the engine and related systems, transmission, axles, hydraulics, electrical systems, and more. Specific procedures and components are identified for the Magnum tractors, which have some differences from other CNH products using similar engines.
Case ih magnum 305 tractor service repair manualfujsjefksekmfm
This document is the table of contents for a tractor repair manual. It lists sections that cover topics like general information, maintenance schedules, cooling system removal and installation, engine removal and installation, electrical systems, and power train systems. The electrical systems section provides schematics, component locations, and troubleshooting information for systems like power distribution, charging, lighting, instrumentation, and starting. The power train section covers the transmission system.
1982 johnson evinrude outboard 7.5 hp service repair manualfujsjefksekmfm
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
1982 johnson evinrude outboard 6 hp service repair manualfujsjefksekmfm
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
9. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your NEW HOLLAND CONSTRUCTION Sales and Service Networks.
48038049 08/11/2016
3
10. INTRODUCTION
Safety rules
B110C NA
B95C Four-Wheel Drive (4WD) Tier 4B (Final) NA
B95C TC Four-Wheel Drive (4WD) Tier 4B (Final) NA
B95C Two-Wheel Drive (2WD) Tier 4B (Final) NA
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48038049 08/11/2016
4
11. INTRODUCTION
Safety rules
General safety rules
Use caution when you operate the machine on slopes. Raised equipment, full tanks and other loads will change the
center of gravity of the machine. The machine can tip or roll over when near ditches and embankments or uneven
surfaces.
Never permit anyone other than the operator to ride on the machine.
Never operate the machine under the influence of alcohol or drugs, or while you are otherwise impaired.
When digging or using ground-engaging attachments, be aware of buried cables. Contact local utilities to determine
the locations of services.
Pay attention to overhead power lines and hanging obstacles. High voltage lines may require significant clearance
for safety.
Hydraulic oil or diesel fuel leaking under pressure can penetrate the skin, causing serious injury or infection.
• DO NOT use your hand to check for leaks. Use a piece of cardboard or paper.
• Stop the engine, remove the key, and relieve the pressure before you connect or disconnect fluid lines.
• Make sure that all components are in good condition. Tighten all connections before you start the engine or pres-
surize the system.
• If hydraulic fluid or diesel fuel penetrates the skin, seek medical attention immediately.
• Continuous long term contact with hydraulic fluid may cause skin cancer. Avoid long term contact and wash the
skin promptly with soap and water.
Keep clear of moving parts. Loose clothing, jewelry, watches, long hair, and other loose or hanging items can become
entangled in moving parts.
Wear protective equipment when appropriate.
DO NOT attempt to remove material from any part of the machine while it is being operated or while components are
in motion.
Make sure that all guards and shields are in good condition and properly installed before you operate the machine.
Never operate the machine with shields removed. Always close access doors or panels before you operate the ma-
chine.
Dirty or slippery steps, ladders, walkways, and platforms can cause falls. Make sure these surfaces remain clean and
clear of debris.
A person or pet within the operating area of a machine can be struck or crushed by the machine or its equipment. DO
NOT allow anyone to enter the work area.
Raised equipment and/or loads can fall unexpectedly and crush persons underneath. Never allow anyone to enter
the area underneath raised equipment during operation.
Never operate the engine in enclosed spaces as harmful exhaust gases may build up.
Before you start the machine, be sure that all controls are in neutral or park lock position with the backhoe swing lock
pin in the lock position. The backhoe swing lock pin must be in the lock position when you are not using the backhoe.
Start the engine only from the operator’s seat. If you bypass the safety start switch, the engine can start with the
transmission in gear. Do not connect or short across terminals on the starter solenoid. Attach jumper cables as
described in the manual. Starting in gear may cause death or serious injury.
Always keep windows, mirrors, all lighting, and Slow-Moving Vehicle (SMV) emblem clean to provide the best possible
visibility while you operate the machine.
48038049 08/11/2016
5
12. INTRODUCTION
Operate controls only when seated in the operator’s seat, except for those controls expressly intended for use from
other locations.
From the operator's platform, install the backhoe swing lock pin when the backhoe is not in use and before all other
operation.
Before you leave the machine:
1. Park the machine on a firm, level surface.
2. Put all controls in neutral or park lock position.
3. Engage the parking brake. Use wheel chocks if required.
4. Lower the loader bucket or other front attachment to the ground.
5. Move the operator’s seat to the backhoe operating position and choose one of the following backhoe positions:
• Move the backhoe into the stowed position and from the operator's seat install the backhoe swing lock pin. See
Cab - Localization overview (90.150).
• Lower the backhoe bucket or other attachment to the ground.
6. Turn off the engine and remove the key.
7. Move the operator’s seat into the driving position.
When, due to exceptional circumstances, you decide to keep the engine running after you leave the operator’s station,
then you must follow these precautions:
1. Bring the engine to low idle speed.
2. Disengage all drive systems.
WARNING
Some components may continue to run down after you disengage drive systems.
Make sure all drive systems are fully disengaged.
Failure to comply could result in death or serious injury.
W0113A
48038049 08/11/2016
6
14. Engine - Engine and crankcase
Engine - General specification
B95C Four-Wheel Drive (4WD) Tier 4B (Final) NA
B95C TC Four-Wheel Drive (4WD) Tier 4B (Final) NA
B95C Two-Wheel Drive (2WD) Tier 4B (Final) NA
B95C, B95C LR, and B95C TC
Model Diesel, F5BFL413B*B003, Tier 4B (Final) emissions
compliant (base engine F5BFL413A*B007)
Type Four cylinder, turbocharged
Firing order 1-3-4-2
Bore and stroke 99 mm x 110 mm ( 3.90 in x 4.33 in)
Displacement 3.4 l (207.5 in³)
Compression ratio 17 to 1
Fuel injection Direct HPCR
Horsepower - rated at 2200 RPM
Gross 72 kW (98 Hp)
Net with viscous fan 71 kW (97 Hp)
Peak torque at 1400 RPM
Gross 459 N·m (339 lb ft)
Net with viscous fan 458 N·m (338 lb ft)
Maximum torque rise 45 % ± 5 RPM
Engine - General specification
B110C Four-Wheel Drive (4WD) Tier 4B (Final) NA
B110C Two-Wheel Drive (2WD) Tier 4B (Final) NA
B110C
Model Diesel, F5BFL413A*B006, Tier 4B (Final) emissions
compliant (base engine F5BFL413A*B007)
Type Four cylinder, turbocharged
Firing order 1-3-4-2
Bore and stroke 99 mm x 110 mm ( 3.90 in x 4.33 in)
Displacement 3.4 l (207.5 in³)
Compression ratio 17 to 1
Fuel injection Direct HPCR
Horsepower - rated at 2200 RPM
Gross 82 kW (111 Hp)
Net with viscous fan 81 kW (110 Hp)
Peak torque at 1400 RPM
Gross 467 N·m (344 lb ft)
Net with viscous fan 466 N·m (344 lb ft)
Maximum torque rise 30 % ± 5 RPM
Engine - Speeds Stall test check sheet
NOTE: The following specifications are for engines with more than 50 hours of operation.
NOTE: Engine RPM speed is based on the ISO 14396 Cetane number of at least 51 and density between 820 -
845 kg/m³ (1382 - 1424 lb/yd³). Fuel inlet 36.0 - 40.0 °C (96.8 - 104.0 °F).
Results from stall test procedure (fill in values accordingly)
ID RPM test valve Stall test component (specified value)
1 Loader hydraulic stall speed ( 2220 - 2330 RPM)
2 Backhoe hydraulic stall speed ( 2220 - 2330 RPM)
3 Torque converter stall speed ( 2150 - 2310 RPM)
4 Combined - loader hydraulic and torque converter - stall speed ( 1810 - 2090 RPM)
48038049 08/11/2016
10.1 [10.001] / 3
15. Engine - Engine and crankcase
Stall test reference chart
ID RPM Results
1 2220 - 2330 RPM
2 2220 - 2330 RPM
3 2150 - 2310 RPM
4 1810 - 2090 RPM
All systems operating within normal specified RPM values.
1 Above 2330 RPM
2 2220 - 2330 RPM
3 Above 2310 RPM
4 Above 2090 RPM
Engine problem. Check engine speeds. Refer to the engine service manual.
1 Below 2220 RPM
2 2220 - 2330 RPM
3 Below 2150 RPM
4 Below 1810 RPM
Engine problem. Check engine speeds. Replace the fuel and air filters Refer
to the engine service manual.
1 Below 2220 RPM
2 2220 - 2330 RPM
3 2150 - 2310 RPM
4 Below 1810 RPM
Hydraulic system problem(s). Check the setting of the main relief valve. Check the
output of the hydraulic pump.
1 Above 2330 RPM
2 2220 - 2330 RPM
3 2150 - 2310 RPM
4 Above 2090 RPM
Hydraulic system problem(s). Check the setting of the main relief valve. Check the
output of the hydraulic pump. Check for leakage in the loader control valve.
1 2220 - 2330 RPM
2 Below 2200 RPM
3 2150 - 2310 RPM
4 1810 - 2090 RPM
Hydraulic system problem(s). Check the setting of the main relief valve. Check the
output of the hydraulic pump.
1 2220 - 2330 RPM
2 Below 2220 RPM
3 2150 - 2310 RPM
4 1810 - 2090 RPM
Hydraulic system problem(s). Check the setting of the main relief valve. Check the
output of the hydraulic pump.
1 2220 - 2330 RPM
2 2220 - 2330 RPM
3 Above 2310 RPM
4 Above 2090 RPM
Torque converter or transmission problems.
1 2220 - 2330 RPM
2 2220 - 2330 RPM
3 Below 2150 RPM
4 Below 1810 RPM
Torque converter or transmission problems.
48038049 08/11/2016
10.1 [10.001] / 4
16. Engine - Engine and crankcase
Engine - Change fluid
WARNING
Avoid injury!
Avoid getting engine oil on your skin. In case of skin contact, wash with running water.
Failure to comply could result in death or serious injury.
W1336B
WARNING
Pressurized system!
Never attempt to drain fluids or remove filters when the engine is running. Turn off the engine and
relieve all pressure from pressurized systems before servicing the machine.
Failure to comply could result in death or serious injury.
W0905A
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Unlock and raise the engine hood.
Engine oil and oil filter - Replace
8. Remove the cap (1) from the the filler neck.
9. Place a suitable container under the engine crankcase
drain plug located in the engine oil pan.
NOTE: Drain the engine oil when it is still warm. The oil will
flow more easily.
RAIL15TLB0025AA 1
48038049 08/11/2016
10.1 [10.001] / 5
17. Engine - Engine and crankcase
10. Remove the drain plug (2) and drain the engine oil
from the crankcase.
RAIL15TLB0028AA 2
11. Place a container with suitable capacity under the fil-
ter.
NOTE: Perform the fuel filter replacement service at the same time as the engine oil and filter replacement service.
The fuel filter must be removed to access the oil filter.
12. Use a suitable tool to loosen and remove the cartridge
oil filter (3).
13. Apply a thin layer of clean oil on the seal of the new
cartridge oil filter.
LEEN11T0414BA_1 3
NOTICE: DO NOT fill the new filter with oil before installing it.
14. Install the new filter (3).
15. Tighten the filter until the seal touches the support (4).
Then, by hand, tighten the filter 3/4 of a turn.
NOTICE: Overtightening can damage the filter seal.
48038049 08/11/2016
10.1 [10.001] / 6
18. Engine - Engine and crankcase
16. Reinstall the drain plug (2).
RAIL15TLB0028AA 4
17. Fill the engine with new oil through the filler neck (1).
RAIL15TLB0025AA 5
18. Run the engine for a few minutes and check for leaks.
NOTE: Always wait 15 min to allow the oil to return to the engine sump before checking the oil level.
19. Remove the dipstick (5) to check the engine oil level.
RAIL15TLB0025AA 6
48038049 08/11/2016
10.1 [10.001] / 7
19. Engine - Engine and crankcase
20. The oil level should be at the full mark. If necessary,
add oil to raise the oil level.
LEEN11T0361AA 7
21. Reinstall the cap (1) on the filler neck.
RAIL15TLB0025AA 8
22. Lower and lock the engine hood.
23. Remove the safety support strut and lower the loader
attachment.
Oil specification and capacity
Use NEW HOLLAND AMBRA UNITEK 10W-40 En-
gine oil SAE 10W40, MAT3521 engine oil or an oil
meeting the following specification: API CJ-4 or ACEA
E9.
NOTE: A higher quality oil is accepted.
NOTICE: For machines operating in cold regions, refer to Page Engine lubrication system - General specification
(10.304).
Engine oil capacity (with filter): 8.0 L (8.5 US qt) .
48038049 08/11/2016
10.1 [10.001] / 8
20. Engine - Engine and crankcase
Engine - Drain fluid
WARNING
Avoid injury!
Avoid getting engine oil on your skin. In case of skin contact, wash with running water.
Failure to comply could result in death or serious injury.
W1336B
WARNING
Pressurized system!
Never attempt to drain fluids or remove filters when the engine is running. Turn off the engine and
relieve all pressure from pressurized systems before servicing the machine.
Failure to comply could result in death or serious injury.
W0905A
1. Move the machine to a level and firm surface.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
the neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the starter switch key.
7. Unlock and raise the engine hood.
8. Remove the cap (1) from the filler neck.
9. Place a suitable container under the engine crankcase
drain plug located in the engine oil pan.
NOTE: Drain the engine oil when it is still warm. The oil will
flow more easily.
RAIL15TLB0025AA 1
48038049 08/11/2016
10.1 [10.001] / 9
21. Engine - Engine and crankcase
10. Remove the drain plug (2) and drain the engine oil
from the crankcase.
RAIL15TLB0028AA 2
48038049 08/11/2016
10.1 [10.001] / 10
22. Engine - Engine and crankcase
Engine - Remove
Prior operation:
Disconnect the battery, see Battery - Disconnect (55.302).
Prior operation:
Drain the engine oil, see Engine - Drain fluid (10.001).
Prior operation:
Remove engine hood, see Engine hood - Remove (90.105).
Prior operation:
Drain the hydraulic fluid, see Oil reservoir - Drain fluid (35.300)
Prior operation:
Drain the transmission fluid, see Power shuttle transmission lubrication system - Change fluid (21.104) (Power
shuttle) or Powershift transmission lubrication system - Change fluid (21.105) (Powershift).
Prior operation:
Remove the cooling package, see Engine cooling system - Remove (10.400).
Prior operation:
If applicable discharge the Air Conditioning A/C system, see Air conditioning - Discharging (50.200) .
1. Disconnect the air temperature sensor X-474.
RAIL15TLB0216AA 1
2. Remove the connector X-4 from 2-way air cleaner con-
nector.
RAIL15TLB0217AA 2
3. Remove the pipe connecting the air cleaner with tur-
bocharger.
RAIL15TLB0217AA 3
48038049 08/11/2016
10.1 [10.001] / 11
23. Engine - Engine and crankcase
4. Remove the aspirator tube. Remove the four mount-
ing bolts (1) securing the air cleaner. Remove the air
cleaner.
RAIL15TLB0218AA 4
5. Disconnect the connecting exhaust pipe from the tur-
bocharger
RAIL15TLB0230AA 5
6. Remove the connectors X-470 (1) and X-471 (2) from
the engine electronic control unit.
RAIL15TLB0237AA 6
7. Remove the ground strap.
RAIL15TLB0235AA 7
48038049 08/11/2016
10.1 [10.001] / 12
24. Engine - Engine and crankcase
8. Disconnect the fuel line (1) from the cylinder head. Dis-
connect the fuel lines from the fuel filter (2).
RAIL15TLB0240AA 8
9. Remove the alternator connector X-67 and connector
X-10.
RAIL15TLB0233AA 9
10. Disconnect the connector X-508 from the starter mo-
tor and the ignition connector.
RAIL15TLB0241AA 10
11. Remove the flywheel access cover.
LELI12TLB0080AA 11
48038049 08/11/2016
10.1 [10.001] / 13
25. Engine - Engine and crankcase
12. Use tool 380000988 to rotate the engine to access
flywheel flex plate hardware.
LELI12TLB0081AA 12
13. Remove the flywheel and flex plate hardware.
LELI12TLB0082AA 13
14. Attach a suitable lifting device.
RAIL15TLB0244AA 14
15. Remove engine mounting hardware.
RAIL15TLB0245AA 15
48038049 08/11/2016
10.1 [10.001] / 14
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Engine and crankcase
16. Remove hardware which attaches the engine to the
transmission.
LELI12TLB0085AA 16
17. Make sure that all the harness connectors and hoses
have been disconnected and are clear of the engine.
Slowly raise the engine from the frame and remove
the engine from the machine.
RAIL15TLB0247AA 17
18. If necessary, see the engine service manual for more
specific details.
48038049 08/11/2016
10.1 [10.001] / 15
28. Engine - Engine and crankcase
Engine - Install
1. Carefully lower the engine on the frame.
RAIL15TLB0247AA 1
2. Attach the engine to the transmission with the hardware
removed earlier. Torque the hardware to 52 - 57 N·m
(38 - 42 lb ft).
LELI12TLB0085AA 2
3. Install the engine mounting hardware to the engine.
Torque the hardware to 89 - 107 N·m (66 - 79 lb ft).
RAIL15TLB0245AA 3
4. Secure engine mounts to the frame. Torque the hard-
ware to 178 - 240 N·m (131 - 177 lb ft).
5. Remove the lifting device.
RAIL15TLB0244AA 4
48038049 08/11/2016
10.1 [10.001] / 16
29. Engine - Engine and crankcase
6. Rotate the engine to access flywheel. Use tool
380000988.
LELI12TLB0081AA 5
7. Reinstall the flywheel and flex plate hardware. Torque
to 62 - 57 N·m (46 - 42 lb ft).
LELI12TLB0082AA 6
8. Install the flywheel access cover.
LELI12TLB0080AA 7
9. Connect the exhaust pipe to the turbocharger with the
clamp. Torque the hardware to 21 - 29 N·m (15 - 21 lb
ft).
RAIL15TLB0230AA 8
48038049 08/11/2016
10.1 [10.001] / 17
30. Engine - Engine and crankcase
10. Connect the connector X-508 on the starter motor and
the ignition connector.
RAIL15TLB0241AA 9
11. Connect the connectors X-67 and X-10 to the alterna-
tor.
RAIL15TLB0233AA 10
12. Connect the ground strap.
RAIL15TLB0235AA 11
13. Connect the fuel line (1) to the cylinder head. Connect
the fuel lines (2) to the fuel filter .
RAIL15TLB0240AA 12
48038049 08/11/2016
10.1 [10.001] / 18
31. Engine - Engine and crankcase
14. Connect the connectors X-470 (1) and X-471 (2) to the
electronic control unit.
RAIL15TLB0237AA 13
15. Install the air cleaner and secure with the bolts (1)
removed earlier. Connect the aspirator tube.
RAIL15TLB0218AA 14
16. Connect the hose to the turbocharger. Torque the
hardware to 3.4 - 4.5 N·m (30.1 - 39.8 lb in).
RAIL15TLB0217AA 15
17. Connect the connector X-4 to 2-way air cleaner con-
nector.
RAIL15TLB0217AA 16
48038049 08/11/2016
10.1 [10.001] / 19
32. Engine - Engine and crankcase
18. Connect the air temperature sensor connector.
RAIL15TLB0216AA 17
19. Top up the engine oil to the level indicated, using the
specific recommended lubricant.
20. Top up the hydraulic oil to the level indicated, using
the specific recommended lubricant.
21. Top up the transmission oil to the level indicated, using
the specific recommended lubricant.
22. Install the cooling system. See Engine cooling sys-
tem - Install (10.400).
23. Charge the Air Conditioning system. See Air condi-
tioning - Charging (50.200)
24. Install the engine hood. See Engine hood - Install
(90.105).
25. Connect the battery. See Battery - Connect (55.302).
48038049 08/11/2016
10.1 [10.001] / 20
33. Engine - Engine and crankcase
Engine - Filling
1. Install the drain plug (2).
RAIL15TLB0028AA 1
2. Fill the engine with new oil through the filler neck (1).
RAIL15TLB0025AA 2
3. Remove the dipstick (5) to check the engine oil level.
RAIL15TLB0025AA 3
48038049 08/11/2016
10.1 [10.001] / 21
34. Engine - Engine and crankcase
4. The oil level should be at the full mark. If necessary,
add oil to raise the oil level.
LEEN11T0361AA 4
5. Reinstall the cap (1) on the filler neck.
RAIL15TLB0025AA 5
6. Once the machine is ready for operation run the engine
for a few minutes and check for leaks.
NOTE: Always wait 15 min to allow the oil to return to the engine sump before checking the oil level.
Oil specification and capacity
Use NEW HOLLAND AMBRA UNITEK 10W-40 En-
gine oil SAE 10W40, MAT3521 engine oil or an oil
meeting the following specification: API CJ-4 or ACEA
E9.
NOTE: A higher quality oil is accepted.
NOTICE: For machines operating in cold regions, refer to Page Engine lubrication system - General specification
(10.304).
Engine oil capacity (with filter): 8.0 L (8.5 US qt) .
48038049 08/11/2016
10.1 [10.001] / 22